PEL Series 60kVA. Regenerative AC Load Bank THE POWER TEST EXPERTS.

Transcription

1 PEL Series 60kVA Regenerative AC Load Bank THE POWER TEST EXPERTS

2 PEL Series 60kVA Product Overview The PEL Regenerative AC Electronic Load sets a new standard for efficient testing of AC power devices. With the growing cost of power energy, conservation has become a major concern and companies are continually searching for ways to reduce costs. At over 90% efficient the PEL regenerates power from the Equipment Under Test (EUT) to the utility grid resulting in significant cost savings. The PEL series is built around 60kVA chassis which may be paralleled for higher power requirements. PEL The PELs accept standard AC input ranges from 120 to 480V and provide a grid-synchronized, regenerated AC power output from 120 to 480V. Three modes of load settings include Constant Current, Constant Resistance and Constant Power. The PELs also provides adjustable power factor from 0.3 to 1.0 to simulate poor power factor load conditions. Add independent phase control and it s apparent why the PEL sets new standards for loading power devices. The PAS-F offers load sequence transient generation for creating complex, variable and repeatable load variations. Program Mode Independent programming for single or three phase 2

3 Featured Benefits Support single and three phase EUT s Independent phase control Regenerates up to >90% of energy to the grid Applied digital synchronization technology with 0.98 utility power factor Selectable CC, CR, CP and Power factor load control Load profile transient generation Independent phase control Low input and output distortion Compact design that minimizes floor space requirements Integrated high accuracy measurements 7 touch panel interface Modbus RS485 and LAN Ethernet remote interfaces Built in power measurement system Why choose PEL? The PEL series is the smart alternative to the resistive loads typically used in test environments that covert energy to heat which often results in costly cooling systems. By regenerating energy back to the utility grid the PEL reduces energy cost and lowers the cost of ownership. The PEL also provide accurate performance measurements for the Unit Under Test (UUT) for all phases of test from engineering development, system evaluation, compliance testing and manufacturing tests including burn-in. Measure Mode IIntegrated measurements of the load (EUT) and power regenerated back to the grid. 3

4 PEL UTILITY GRID EUT PEL Options Remote Options Webcomm Ethernet Connection Best-in-Class The PEL solutions are easily serviced by Intepro Systems, LP, an ISO 9001 certified company. Intepro prides itself on best-in-class service support by minimizing the pains associated with system failure and maximizing uptime of our products. In the unfortunate and rare event of failure, the standard one year warranty includes ON-SITE repair. Returning high power products back to the factory is expensive, impacts development schedules and furthers risk associated with lengthy transit times. Extended service level agreements and yearly calibrations are available for up to five years. 4

5 Model Name Input Working Mode Grid-Connected Side Protection Input Voltage Input Frequency PEL V/208V, 220V/380V, or 277V/480V+/-10% 45~65Hz Phase/Wire 3Phase/4Wire or Single Phase/2 Wire +G Input Current 90A (Maximum) Input THD <4% Input Power Factor 0.3~1 Constant Current (CC) 90A, PF: 0.3~1 Constant Resistor (CR) Constant Power (CP) 2.4~44Ω(Each Phase), PF:0.3~1 0~20kVA(Each Phase), PF:0.3~1 120V/208V: 166A (Maximum) Grid Connect Current 220V/380V: 90A (Maximum) 277V/480V: 72A (Maximum) Grid Connect ithd <3% Grid Connect Power Factor 0.99 Grid Connect Efficiency >90% Over Voltage/Under Voltage, Over Frequency/Under Frequency, Over Current, IGBT Over Current, Over Temperature, Emergency Stop Input Voltage Accuracy: 0.2V+0.1%FS Resolution: 0.01V Input Frequency Accuracy: 0.01Hz+0.01%FS Resolution: 0.01Hz Input Current Accuracy: 0.2A+0.1%FS Resolution: 0.01A Input Power Factor Accuracy: +/-0.01 Resolution: 0.01 Input Power (kw) Accuracy: 0.2kW+0.1%FS Resolution: 0.01kW Measurement Grid Connect Voltage Accuracy: 0.2V+0.1%FS Resolution: 0.01V Grid Connect Frequency Accuracy: 0.01Hz+0.01%FS Resolution: 0.01Hz Grid Connect Current Accuracy: 0.2A+0.1%FS Resolution: 0.01A Grid Connect PF Accuracy: +/-0.01 Resolution: 0.01 Grid Connect Power Accuracy: 0.2kW+0.1%FS Resolution: 0.01kW Humidity: 0~90% Non-Condensing Operate Environment Working Temperature: -5~50deg C Cooling Method Fan Dimension (WxDxH) mm/in 31.50x31.50x82.68 / 800x800x2100 5

6 Case Dimensions (width x depth x height) x x (in) / 800 x 800 x 2100 (mm) Input Voltage Range 100V 110V 115V 120V 200V 208V 220V 230V 240V 380V 400V 415V 440V 480V 1Ø2W+G 1Ø2W+G or 3Ø3W+G ( -Connection) 3Ø3W+G ( -Connection) 110/190 V 115/200 V 120/208 V 127/220 V 220/380 V 230/400 V 240/415 V 254/440 V 100/200 V 110/220 V 115/230 V Consult Intepro System for other Input Voltages 3Ø4W+G or 3Ø4W+N+G (Y-Connection) 1Ø3W+G Contact Us United States Intepro Systems America, LP A Franklin Ave Tustin, CA Tel: sales@inteproate.com United Kingdom Intepro UK Ltd. 9 Lakeside Business Park Swan Lane, Sandhurst Berkshire GU47 9DN / UK Tel: China Intepro Power Electronics (Shenzhen) Co., Ltd No. 828, Block 7, Fourth Industrial Area Nanyou, Nashan District Shenzhen, China Tel: