Power & Energy Automation

Transcription

1 Power & Energy Automation 3 Power & Energy Automation Overview 3-2 Rackmount Automation Computers Selection Guide 3-4 Stand-Mounted RISC-Based Industrial Communication Gateway 3-5 Smart Meter Selection Guide 3-6 UNO-4671A Intel Atom D525 Power & Energy Automation Computers with 6 x LAN, 10 x COM, and 1 x PCI-104 ECU-4574 Intel Atom N2600 Power & Energy Computers with 8 x LAN, 10 x COM Ports 3-8 ECU-4674 UNO-4673A UNO-4683 Intel Atom N2600 Power and Energy Computers with 8 x LAN, 18 x COM, 8 x D/I, 8 x D/O, 1 x IRIG-B, and 1 x PCI-104 Intel Atom /Core i7 Automation Computers with 6 x LAN, 2 x COM and 3 x Expansion Slots ECU-4784 IEC Certified Power Automation Computers 3-11 ECU-P1628D/1618D UNOP-1624D UNOP-1514RE/PE 8-Port Isolated/Non Isolated RS-232/422/485 4-Port Isolated RS-232/422/485 with IRIG B 4-Port Gigabit Base Ethernet Card ECU-P1524PE 2-Port SFP Gigabit Base Ethernet Card with HSR/PRP 3-14 ECU-P ch Isolated Digital Input, 4-ch Isolated Relay Output with IRIG-B Board 3-15 ECU-1152 ECU-4553 WISE-M501 WISE-M502 TI Cortex A8 Industrial Communication Gateway with 2 x LAN and 6 x COM Ports TI Cortex A8 Power Automation Computer with 4 x LAN, 18 x COM, 2 x CAN and 1 x IRIG-B Multifunction Panel Mount Smart Power Meter Multi-Loop DIN Rail Smart Power Meter

2 Power and Energy Automation Overview The successful management of power & energy applications is becoming increasingly critical as new energy sources, distributed across a much wider area than fossil fuels, become increasingly important. The informatization, intellectualization and energy development of these new energy sources will change the traditional model, from a single communication model without response, to an alarm-to-intercommunication, and unified communication model. Advantech, as a leading manufacturer of industrial PCs for power and energy applications, provides intelligent components, from smart meters, IEC certified industrial computers, intelligent wireless gateway to SCADA software, focusing on renewable energy generation, substation automation system development and energy management. Through a host of innovative products and solutions, Advantech has shown itself to be one of the key enablers of Industrial IoT and Industry 4.0. Smart Substation Automation Applications for station level, bay level and process level SCADA Application In Smart Substations, it s essential to be able to remotely monitor substation devices from a central management center. To achieve this, high performance computing platforms integrate HMI/DATA collection, data monitoring, environmental status, which help operators accurately evaluate their devices status and take action. Application Requirements Reliable IEC certification High-performance computing platform AMT/ TPM Cyber Security for Smart Grids There are different grades of network protection priorities in a substation, and use in these environments needs reliable cyber security. This requires a software firewall or comparable hardware firewall devices to prevent illegal and unauthorized user access. Application Requirements Reliable IEC certification High-performance Ethernet Virtual Machine/ TPM Communication & Data Gateway with IEC Within a substation, various devices use a wide variety of protocols, such as IEC /103/104, Modbus or other private rules. The status and information of these devices needs to be accurately monitored and collected through a gateway computer with a unified communication transition protocol. It s very important that transfer devices use various protocols to unify the IEC protocol. Application Requirements Reliable IEC certification Multiple communication interfaces support Isolated serial ports, Ethernet ports, IRIG-B Auxiliary Safety Monitoring Along with modern computing and network communication technology, fast developing, electricity system automation becomes more important, especially for safety precaution related applications. The goal is to avoid the issues of traditional substation isolated island, such as non-precaution and non-linkage conditions. Advantech s computers and devices provide safety related information acquisition and monitoring, such as environmental parameters, facility parameters, access guard status and other unusual conditions. Application Requirements On-board or expansion IO for data acquisition Communication protocol support for monitoring sensors Primary Device Monitoring In smart substations, traditional primary devices including transformers, GIS, CT/VT, Thunder and other isolated switches, normally operate without precaution, monitoring or unified communication protocols. Along with the development of modern smart substations, the IEC standard is latest trend in substation applications and primary device monitoring. To meet these requirements, Advantech provides IEC compliant computer platforms for data communication and transmission which keeps primary devices operating normally. Application Requirements Flexible I/O, communication interfaces and protocol support Highly reliable computing platform 3-2 Power & Energy Automation

3 Renewable Energy-Solar Monitoring solution With the increasing construction of solar power plants, customers are finding it difficult to handle issues of the number of communication protocol requests, unstable communication networks on distributed farms and no high-efficiency or intelligent monitoring software. This means traditional solar power monitoring solutions can not satisfy modern fast developing solar operation requirements. To solve customers issues, Advantech provides high-performance computing platforms, total data acquisition modules, communication protocol gateways, network communication and cloud software solutions with multiple communication protocols and stable Ethernet or wireless network support, network switchboards and remote monitoring software. Data Acquisition Using Multiple Communication Protocols There are many types of electrical equipment in solar power farms, such as inverters, combiner boxes, intelligent or non-intelligent power meters, which need the support of a diverse range of communication protocols. For device data acquisition Advantech provides communication platforms compatible with these protocols. Application Requirements X86/ RISC-based gateway platforms Multiple serial ports / network ports IEC / Modbus / DNP3 protocol support Wireless Communication on Distributed Solar Power Distributed solar power farms are scattered over vast and remote areas, and establishing a stable communication network system under this applications is not easy. To reduce wiring costs and maintain a stable communication network, Advantech provides gateways capable of supporting 2G/3G/Wi-Fi/4G wireless for selection and keeping communication networks stable and with data integrity. Application Requirements 2G/3G/Wi-Fi/4G wireless Reliable platform with integrated intelligent software Remote Monitoring and Maintenance The operating status of solar power plants (especially solar panels) directly affects power generation efficiency and capacity. Comprehensive centralized monitoring and scientific management is important. Due to the characteristics of wide areas and long distances, Advantech provides remote control solutions for helping administrators immediately understand the operational status of the plant through handheld devices or PCs. This helps with the timely control and maintenance of equipment while enhancing the efficiency and safety of solar power plants. Power & Energy Automation Overview Power Energy Management In order to reduce production costs and increase product profitability, manufacturing factories require the integrated monitoring management and optimization measures to manage their high energy-consuming facilities. Advantech not only provides the practical and easy-to-implement energy management solutions, but also has a full range of portfolios, including the front-end products (smart meter, data acquisition module and control host) and back-end management platform to offer the complete solutions for enterprises to achieve energy efficiency. Multifunction Smart Meter WISE-M500 series products are multifunctional smart meters and are in line with European standard design with easy to install and configure to meet the energy monitoring requirements of industrial equipments at minimum investment costs as well as obtaining maximum economic benefits. High Energy-consuming Equipment Monitoring Application Since harmonic can have a significant impact on electrical distribution systems and the critical facilities they feed, Advantech s energy-consuming management solutions use the equipment failure diagnosis and prevention mechanism to provide analytical information through monitoring the harmonic currents generated by non-linear electronic loads, so as to improve production efficiency and reduce maintenance and energy costs. Factory Facility Monitoring Application By providing real-time energy consumption data to accurately grasp the key moments, Advantech s factory facility monitoring system aimed at controlling the high consumption facilities such as lighting, HVAC (heating, ventilation and air conditioning) and UPS (uninterruptible power supply). Meanwhile, we offer the time-of-use pricing service to adjust the use and operation of the facility according to the actual power usage and electricity tariff, thus saving energy costs. WebAccess Based Remote Energy Management Solution For the factory's energy consumption, Advantech WebAccess SCADA software is able to implement the remote management, energy consumption status overview, energy saving potential assessment and recommend practical measures, energy monitoring and reporting analysis, etc. to effectively achieve energy savings and cost control WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download 3-3

4 Rackmount Automation Computers Selection Guide P&E Automation Computers NEW NEW NEW Model Name UNO-4671A ECU-4674 ECU-4574 UNO-4673A/4683 ECU-4784 Certification CPU IEC / IEEE 1613 Compliant China Electricity Certificate IV level Intel Atom D GHz IEC / IEEE 1613 Compliant China Electricity Certificate IV level Intel Atom N GHz IEC /IEEE 1613 China Electricity Certificate IV level Intel Atom N GHz RAM 4GB DDR3 SDRAM 2G DDR3 SDRAM 2G DDR3 SDRAM Battery-Backup RAM IEC /IEEE 1613 Compliant China Electricity Certificate IV level Intel Atom D510, 1.6 GHz Intel Core i7, 2.0 GHz 2GB DDR2 SDRAM 4GB DDR3 SDRAM IEC / IEEE 1613/ China Electricity IV level/ UL/ CB/ LVD Certificate Intel Haswell Core i7-4650u 1.7 GHz 8G DDR3L SDRAM 16G DDR3L SDRAM MB - Display VGA VGA VGA VGA/DVI-I VGA/DVI Serial Ports Ethernet Ports 2 x Isolated RS-232, 4 x Isolated RS-422/485, 4 x Isolated RS x 10/100/1000Base-T and 4 x 10/100 Base-T RJ-45 2 x Isolated RS-232, 16 x Isolated RS-232/485 2 x 10/100/1000Base-T 6 x 10/100Base-T 2 x isolated RS x isolated RS-232/485 2 x 10/100/1000Base-T 6 x 10/100Base-T 2 x Isolated RS-232/422/485 2 x 10/100/1000, 4 x 10/100 Base-T RJ-45 2 x Isolated RS-232 (Standard), 8 x RS-232/422/485 1 x 10/100/1000 Base T RJ45 (Support AMT) 7 x 10/100/1000 Base T RJ45 Smart LAN USB Ports Four (One internal) Five (One internal) Four Six (One internal) Six (One internal) PC/104 Expansion PCI-104 PCI Onboard I/O - 8 x isolated DI, 8 x isolated DO Watchdog Timer Yes Yes Yes Yes Yes CompactFlash Slots 2.5" HDD Expansion Operating Systems One Internal One Internal One Internal One Internal One Internal 1 x SATA 2 x SATA 1 x SATA 1 x SATA 2 x SATA WES2009, WES7, Windows CE 6.0 and Linux WES7, Windows7, Linux WES7, Windows7, Linux WES7, Windows XP Embedded, Windows / XP, Windows CE 6.0, Linux, QNX, Win10, Win7, Windows Server 2008R2/ 2012/ 2012R2 Windows7, Windows8, Windows Server 2008 R2, WES7(WS7P), Windows Server 2012R2, Windows Embedded 8 64-bit, Linux Mounting 2U Rackmount 2U Rackmount 1U Rackmount 2U Rackmount 2U Rackmount Anti-Vibration 2 G w/cf, 0.5 G w/hdd 2 G w/cf, 1 G w/hdd 2 G w/cf, 1 G w/hdd 2 G w/cf, 1 G w/hdd 2 Gw/CF, 1 Gw/HDD Anti-Shock Operating Temperature Power Consumption Typical Power Requirements Dimensions (W x D x H) 30 G w/cf, 20 G w/hdd 30 G w/cf, 20 G w/hdd 30 G w/cf, 20 G w/hdd 30 G w/cf, 20 G w/hdd 30 G w/cf, 20 G w/hdd -20 ~ 60 C (-4 ~ 140 F) -25 ~ 70 C (-13 ~ 158 F) -25 ~ 70 C (-13 ~ 158 F) -20 ~ 70 C (-4 ~ 158 F) -25 ~ 70 C (-13 ~ 158 F) 30 W 30 W 30 W 45 W 25 W Supports Redundant power input Power 1: 100 ~ 240 VAC or 100 ~ 240 VDC Power 2: 100 ~ 240 VAC or 100 ~ 240 VDC 440 x 220 x 88 mm (17.3" x 8.6" x 3.4") Supports Redundant power input Power 1: 100 ~ 240 VAC or 100 ~ 240 VDC Power 2: 100 ~ 240 VAC or 100 ~ 240 VDC 440 x 220 x 88 mm (17.3" x 8.6" x 3.4") Supports Redundant power input Power 1: 100 ~ 240 VAC or 100 ~ 240 VDC Power 2: 100 ~ 240 VAC or 100 ~ 240 VDC 440 x 272 x 44 mm (17.3" x 8.6" x 3.4") Supports Redundant power input Power 1: 100 ~ 240 VAC or 100 ~ 240 VDC Power 2: 100 ~ 240 VAC or 100 ~ 240 VDC 440 x 220 x 88 mm (17.3" x 8.6" x 3.4") Supports Redundant power input Power 1: 100 ~ 240 VAC or 100 ~ 240 VDC Power 2: 100 ~ 240 VAC or 100 ~ 240 VDC 440 x 220 x 88 mm (17.3" x 8.6" x 3.4") Weight ~ 5.5 kg ~ 6.0 kg 4.6 Kg ~ 6.0 kg ~ 6.0 kg Page Power & Energy Automation

5 Stand mount RISC-based Industrial Communication Gateway Module Name ECU-1152 ECU-4553 Certification CE/FCC CE/FCC/CCC CPU TI Cortex A8 800MHz TI Cortex A8 800MHz RAM DDR3L 512MB DDR3L 1GB Serial Ports 6 x isolated RS-232/ x isolation RS-232/485 Ethernet Ports 2 x 10/100 Base-T 4 x 10/100 Base-T CAN - 2 x CAN 2.0B Display - VGA USB Ports 1 1 Storage 2 x SD (Micro-SD) 2 x SD (Micro-SD) Watch Timer Yes Yes Power Requirements 10 ~ 30 VDC 100 ~ 240 VAC or 100 ~ 240 VDC Operating System RT-Linux 3.12 RT-Linux 3.12 Mounting Wall-mount/ DIN-rail 1U Rack-mount Anti-vibration 2G w/micro-sd 2G w/micro-sd Anti-shock 10G w/micro-sd 10G w/micro-sd Operating Temperature -40 C ~ 70 C -20 C ~ 70 C Typical Power Consumption 24W 6.6W Dimensions 170 x 110 x 32.2 mm 440 x 220 x 44 mm Weight 1.5kg 4.5kg Page WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download 3-5

6 Smart Meter Selection Guide Module Name WISE-M501 WISE-M502 WISE-M511 (coming soon) WISE-M504 (coming soon) Voltage ±0.25% ±0.25% ±0.25% N/A Current ±0.25% ±0.25% ±0.25% ±0.04% of FS(A) Active Power ±0.5% ±0.5% ±0.5% ±0.1% of FS(W) Accuarcy Power factor ±0.5% ±0.5% ±0.5% N/A Frequency ±0.2% ±0.2% ±0.1% N/A Energy ±0.5% ±0.5% ±0.5% ±0.1% of FS THD for voltage ±1.0% N/A ±1.0% N/A Energy Active Energy WH Total WH Total Reactive Energy QH Total QH Total WH_imp,WH_exp,WH_ total,wh_net QH_imp,QH_exp,QH_ total,qh_net N/A N/A Power Quality THD THD_V12, THD_V23, THD_V31, THD_Vavg THD_I1, THD_I2, THD_I3, THD_Iavg N/A THD_V12, THD_V23, THD_V31, THD_Vavg THD_I1, THD_I2, THD_I3, THD_Iavg N/A Timer Format Year, Month, Date, Hour, Minute, Second Date, Hour, Minute, Second Year, Month, Date, Hour, Minute, Second N/A Storage storage medium N/A 1MB Flash N/A N/A Communication RS-485 Port (MODBUS) 38400bps bps 38400bps 38400bps Measurement Range Voltage 40V to 600V L-N 50.0V ~ 99.99KV (PT primary) 40V to 600V L-N 0-50mV/ ~ 600Vdc Current 1% ~ 120% /0-5A 1% ~ 120% /0-5A 1% ~ 120% / 0-5A 0-200uA/ ~ 10Adc Frequency 45-65Hz 45-65Hz 45-65Hz N/A Display LCD Module LCD LCD Module 0.28'' LED Operating Temp ~ 60 0 ~ 60 Weight 400g 185g 450g 310g Power Supply AC /DC V AC /DC V AC V/DC V AC V/DC V others Ordering Information WISE-M501-A5V6E WISE-M C060E WISE-M C060E coming soon coming soon 3-6 Power & Energy Automation

7 UNO-4671A Intel Atom D525 Power & Energy Automation Computers with 6 x LAN, 10 x COM, and 1 x PCI-104 IEC and IEEE 1613 compliant for Power & Energy automation applications China Electricity Certificate IV level Onboard Intel Atom D GHz processor Supports wide range and dual power input 2 x RS-232 isolated ports, 4 x RS-422/485 isolated ports and 4 x RS-485 isolated ports 6 x 10/100Base-T RJ-45 connector/2 x 10/100/1000Base-T and 4 x 10/100 Base-T RJ-45 connector Supports 1 x internal CF card and 1 x 2.5" SATA HDD Fanless design WES 2009, Windows XP, Windows CE 6.0, WES7 and Linux ready solution The UNO-4671A is compliant with Electricity Certificate level IV (especially for China) and IEC certification, which defines the international standards of network and system communications in power substations. Featuring a fanless design with low power consumption and high performance Intel Atom D525 processor, the UNO-4671A comes with 10 isolated serial ports, 6 x LAN, 4 x USB (Internal) and 1 x PCI-104 extension. With rich OS and driver support, such as WES 2009, Windows XP, Windows CE 6.0, WES7 and Linux, users can integrate applications easily with a platform that can provide versatile functions to fulfill diverse requirements. NEW CE, FCC class A, CCC, Electricity IV level for China (Compatible IEC , IEEE 1613) Dimensions (W x D x H) 2U (440 x 220 x 88 mm/17.3" x 8.6" x 3.4") fits into standard 19 inch rack Enclosure SECC & Aluminum Mounting 2U Rackmount Power Consumption V (Typical) Power Requirements Supports Redundant power input Power 1: 100 ~ 240 V AC or 100 ~ 240 V DC Power 2: 100 ~ 240 V AC or 100 ~ 240 V DC Weight < 5.5 kg System Design Fanless design OS Support WES 2009, Windows XP, Windows CE 6.0, WES7 and Linux Remote Management Built-in Advantech DiagAnywhere agent on Windows CE/XPe/7 System Hardware CPU Intel Atom D GHz Memory 4GB DDR3 SDRAM Indicators LEDs for Power1&2, IDE, LAN (Active,Link) and Serial (Tx, Rx) Storage 1 x Internal typei/ii CompactFlash slot, 1 x Built-in 2.5" SATA HDD bracket Display VGA, 1920 x 1080 Reset Button Yes WatchDog Timer Programmable 256 levels time interval, from 1 to 255 seconds for each tier I/O Interface Serial Ports 10 ports, 2 x RS-232, 4 x RS-422/485, 4 x RS-485 (Automatic RS-485 data flow control) Communication Speed RS-232: 50 ~ kps, RS-422/485: 50 ~ bps LAN 2x 10/100/1000 Base-T RJ-45 ports and 4 x 10/100 Base-T RJ-45 ports USB Ports 4 x USB (include 1 x internal USB), UHCI, Rev. 2.0 compliant Expansion 1 x PCI-104 Storage Humidity 40 C (non-condensing) Operating Temperature IEC with 100% CPU/ I/O loading, 48 hrs -20 ~ 60 C (-4 ~ 140 F) Operating Humidity 20 ~ 95% (non-condensing) Shock Protection IEC CompactFlash : 30 G half sine, 11 ms HDD: 20 G half sine, 11 ms Vibration Protection IEC (Random 1 Oct./min, 1hr/axis.) CompactFlash: 2 5 ~ 500 Hz UNO-4671A-A44BE 96PSO-A120W24(*) Intel Atom D GHz, 4GB RAM Power & Energy Automation Computer SPS AC V 120W W/PFC EOFP-120MA (For UNO-4671A Dual Power, by CTOS configuration center) WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download 3-7

8 ECU-4574 NEW Intel Atom N2600 Power & Energy Computers with 8 x LAN, 10 x COM Ports IEC and IEEE 1613 compliant for substation applications Intel Atom N GHz processor, 2GB DDR3 2 x RS-232, 8 x RS-232/485 isolated serial ports 2 x 10/100/1000, 6 x 10/100 Base-T Ethernet ports 1 x CF, 1 x 2.5" SATA SSD Redundant isolated power with wide AC/DC input range Mounting: 1U Rack-mount The ECU-4574 product is compliant with Electricity Certificate level IV, IEC and IEEE 1613 certification, provides higher reliability and stability performance that is suitable for global smart substations. With a flexible communication interface, the ECU-4574 works as an IED Analyzer that fulfills the smart substation bay level requirements. Featuring a fanless design with Intel Atom N2600 processor, 10 isolated serial ports, eight Ethernet ports, the ECU-4574 is easy for customization and fast assembly to fulfill different kinds of applications. CE, FCC class A, CCC (Compatible IEC , IEEE 1613) Dimensions (W x D x H) 480 x x 44.5 mm Enclosure SECC & Aluminum Mounting 1U Rack mount Power Requirements Supports Redundant power input Power 1: 100 ~ 240 V AC or 100 ~ 240 V DC Power 2: 100 ~ 240 V AC or 100 ~ 240 V DC Power Consumption 220 V AC (Typical) Weight < 4.5 kg OS Support Windows7, WES7(WS7P), Linux (Debain 5.0) System Design Fanless System Hardware CPU Intel Atom N2600, 1.6GHz Memory 2G DDR3 SDRAM built-in Indicators LEDs for Power, IDE, LAN(LINK, ACT) and Serial (Tx, Rx) Storage 1 x internal CF, 1 x 2.5" SATA SSD Display DB15 VGA connector Watchdog Timer Programmable 256 levels time interval, from 1 to 255 seconds for each tier I/O Interface Serial Ports Serial Port Speed LAN USB Ports 2 x RS-232, 8 x RS-232/485 2,500 V DC isolation RS-232: 50 ~ kbps, RS-485: 50 ~ kbps 2 x 10/100/1000Base-T RJ-45 ports, teaming function supported 6 x 10/100Base-T RJ-45 ports 4 x USB, UHCI, Rev. 2.0 compliant Storage Humidity 5 ~ 95% RH (non-condensing) Operating Temperature IEC with 100% CPU/ I/O loading, 24 hrs -25 ~ 70 C (-13 ~ 158 F) Operating Humidity 5 ~ 95% RH (non-condensing) Shock Protection IEC CompactFlash : 30 G half sine, 11 ms Vibration Protection IEC (Random 1 Oct./min, 1hr/axis.) CompactFlash: 2 5 ~ 500 Hz ECU-4574-A53SAE Intel Atom N Ghz 8LAN 10COM (1 IRIG-B for Selection) Computer XECU-FSP150-1H35(*) FSP AC/DC V 150W W/PFC (Note: For ECU-4574 Dual Power, by CTOS configuration center) 3-8 Power & Energy Automation

9 ECU-4674 NEW Intel Atom N2600 Power and Energy Computers with 8 x LAN, 18 x COM, 8 x D/I, 8 x D/O, 1 x IRIG-B, and 1 x PCI-104 Intel Core i7, i3/celeron processors Isolated 8 x LAN, 10 x serial port communication interfaces 220 VAC/DC redundant power supply 48Vdc power for selection 2 x I/O expansion slots 2 x 2.5" SATA HDD, 1 x CFast socket for storage VGA and DVI display interface Programmable LEDs Intelligent connectivity diagnosis management Remote management Trusted platform module Virtualization technology for directed I/O The ECU-4674 product is compliant with Electricity Certificate level IV (especially for China) and IEC and IEEE 1613 certification, which provides higher reliability and stability, suitable for any Global P&E automation market and harsh environment. With versatile communication interface to use for Smart substation Communication server and IED Analyzer to fulfill the Data Gateway & Protocol Conversion requiremment easily. Featuring a fanless design with high performance Intel Atom N2600 processor, the ECU-4674 comes with 18 isolated serial ports, 8 x LAN and 1 x PCI-104 extension. With icdmananger support, users can easy diagnose System & Communication and enhance maintenance efficiency, with Structured and functional module Internal design for easy customization and Fast assembly to fulfill the different kind of application. Dimensions (W x D x H) 440 x 220 x 88 mm Enclosure SECC & Aluminum Mounting 2U Rack mount Power Requirements CE, FCC class A, CCC, Electricity IV level for China (Compatible IEC , IEEE 1613) Supports Redundant power input Power 1: 100 ~ 240 V AC or 100 ~ 240 V DC Power 2: 100 ~ 240 V AC or 100 ~ 240 V DC Supports Power loss alarm Weight < 5.5 kg OS Support Windows7, WES7(WS7P), Linux (Debain 5.0) System Design Fanless System Hardware CPU Intel Atom N2600, 1.6GHz Memory 2G DDR3 SDRAM built-in Indicators LEDs for Power, HDD, Programmable LED,IRIG-B, LAN (Active, Status) and Serial (Tx, Rx) Storage 1 x internal CF, 2 x 2.5" SATA HDD (RAID 0,1) Display DB15 VGA connector Expansion slot 1 x PCI-104 Watchdog Timer Programmable 256 levels time interval, from 1 to 255 seconds for each tier I/O Interface Serial Ports 18 Ports, 2 x RS-232, 16 x RS-232/485 (Max.) 2,500 V DC isolation (Automatic RS-485 data flow control) Serial Port Speed RS-232: 50 ~ kbps, RS-485: 50 ~ kbps LAN 2 x 10/100/1000Base-T RJ-45 ports, teaming function supported, 6 x 10/100Base-T RJ-45 ports USB Ports 5 x USB (1x internal), UHCI, Rev. 2.0 compliant Digital Input Digital Output Programmable LED 8-ch isolated digital input Wet contact: Logic 0:0 ~ 3 V DC; Logic 1: 10 ~ 30 V DC Isolation protect: 2000 V DC, V DC over voltage protection (Only for ECU-4674-A53SAE) Opto-Isolator Response:25us-interrupt capable 8-ch isolated digital output 2000 V DC isolation, 200mA max/channel sink current Keeps output status after system hot reset Open collector to 40V (200mA maximum sink current load) 3 khz speed (Only for ECU-4674-A53SAE) 8-ch programmable LED indicator Time Synchronization Interface Type IRIG-B (RS-485) Channel 1 Support Format IRIG-B00X according to IRIG STANDARD 04, Message Syntax QQQHHMMSS (year, day, hour, minute & second) Resolution of Time 1s Storage Humidity 5 ~ 95% RH (non-condensing) Operating Temperature IEC with 100% CPU/ I/O loading, 24 hrs -25 ~ 70 C (-13 ~ 158 F) Operating Humidity 5 ~ 95% RH (non-condensing) Shock Protection IEC CompactFlash : 30 G half sine, 11 ms Vibration Protection IEC (Random 1 Oct./min, 1hr/axis.) CompactFlash: 2 5 ~ 500 Hz ECU-4674-A53SAE Intel Atom N Ghz,8 x LAN,18 x COM, 8 x DI/ DO, 1IRIG-B Computer ECU-4674-LBA53SAE Intel Atom N Ghz, 8 x LAN, 10 x COM (1 IRIG-B for Selection) Computer XECU-FSP150-1H35(*) FSP AC/DC V 150W W/PFC (Note: For ECU-4674 Dual Power, by CTOS configuration center) 9893SW0400E (*) DC 36V ~ 72V module(note: For ECU V Power Request, by CTOS configuration center) ECUP-1514R-AE(*) PCI Port LAN Ethernet Card For ECU-4674 (Note: by CTOS configuration center) Online Download WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking 3-9

10 UNO-4673A UNO-4683 NEW Intel Atom /Core i7 Automation Computers with 6 x LAN, 2 x COM and 3 x Expansion Slots IEC and IEEE 1613 compliant for substation automation applications Onboard Intel Atom 1.66 GHz / Core i7 2.0 GHz processor 2 x RS-232/422/485 isolated serial ports with automatic flow control and 128KB FIFO 2 x 10/100/1000 Base-T (supports teaming function) and 4 x 10/100 Base-T Supports 1 x internal CF card and 1 x 2.5" SATA HDD 6 x USB 2.0 (1 x internal) and 3 x Domain I/O expansions Rear wiring, multiple system & I/O LED status indicators Windows related and Linux Fanless design Isolation power design with wide AC / DC input range Isolation between chassis and power ground One internal USB for dongle and flash drive Redundant power supplier for system power backup 3-10 The UNO-4673A and UNO-4683 are compliant with the hardware requirements of IEC , which defines the international standards of network and system communications in power substations. Featuring fanless designs with built-in isolated PSU and 3 expansion slots for I/O plug-in cards, the UNO-4673A and UNO-4683 are suitable for harsh environment applications. The rear I/O connection and LEDs on front panel for all ports and modes highly simplify monitoring for operation and maintenance. IEC , IEEE 1613, CE, FCC Class A, UL, CCC Dimensions (W x D x H) 2U (440 x 280 x 88) mm (17.3" x 11" x 3.4") fits into standard 19 inch rack Enclosure SECC Mounting 2U Rackmount Power Consumption 45W (Typical) Power Requirements AC : 100 ~ 240 V AC (47 ~ 63 Hz) DC : 106 ~ 250 V DC With isolation protection, AT Weight 6.0 kg OS Support WES7, Windows XP Embedded, Windows /XP, Windows CE 6.0, Linux, QNX, Win10, Win7, Windows Server 2008R2/ 2012/ 2012R2 System Design Fanless Remote Management Built-in Advantech DiagAnywhere agent on Windows CE/XPe System Hardware CPU Intel Dual Core Atom D GHz / Core i7 2.0 GHz Memory 2G DDR2 SDRAM/4G DDR3 SDRAM built-in Indicators LEDs for Power, IDE, Alarm for battery backup SRAM, Diagnosis (programmable), LAN (Active, Status) and Serial (Tx, Rx) Keyboard/Mouse 2 x PS/2 connector for Keyboard & Mouse Storage CF 1 x internal type I/II CompactFlash slot HDD 1 x build-in 2.5" SATA HDD bracket *RAID capable with 2nd HDD kit Display DB15 VGA connector, 2048 x 85 Hz (UNO-4673A) 1 x DVI-I (UNO-4683) Watchdog Timer Programmable 7-tier event handler, from 1 to 255 seconds for each tier Battery Backup SRAM 1 MB Relay: Relay output: Form C Contact: 5A@250V AC\5A@30V DC Power & Energy Automation I/O Interface Serial Ports Serial Port Speed LAN Audio USB Ports Expansion 2 x DB-9 Automatic RS-485 data flow control 2000 V DC EFT protection & 2000 V DC isolation RS-232: 50 ~ kbps RS-422/485: 50 ~ kbps (Max.) 2 x 10/100/1000 Base-T RJ-45 ports,teaming function supported 4 x 10/100Base-T RJ-45 ports Line-out 6 x USB, UHCI, Rev. 2.0 compliant 2 x Front, 3 x Rear and 1 x Internal ports 3 x Domain I/O expansions (Only slot 1 supports PCIe resource) Storage Humidity 5 ~ 95% RH (non-condensing) Operating Temperature IEC with 100% CPU/ I/O loading, 48 hrs -20 ~ 70 C Operating Humidity 5 ~ 95% RH (non-condensing) Shock Protection IEC CompactFlash : 50 G half sine, 11 ms HDD: 20 G half sine, 11 ms Vibration Protection IEC (Random 1 Oct./min, 1hr/axis.) CompactFlash : 2 5 ~ 500 Hz, HDD: 1 5 ~ 500 Hz UNO-4673A-A33E UNO-4683-D34E UNO-4673ADP-A33E UNO-4683DP-D34E Intel Atom 1.66 GHz, 2 GB RAM Automation Computer Core i7 2.0 GHz, 4 GB RAM Automation Computer Intel Atom 1.66 GHz, 2 GB RAM, dual PSU Automation Computer Core i7 2.0 GHz, 4 GB RAM, dual PSU Automation Computer

11 ECU-4784 NEW IEC Certified Power Automation Computers Intel Hasewell Core i7, i3, Celeron Processors Isolated 8 x LAN, 10 x Serial Port Communication Interfaces 220V AC/ DC Redundant Power Supply 48V Power for Selection 2 x IO Expansion Slots 2 x 2.5 SATA HDD, 1 x CFast Socket for Storage VGA & DVI Display Interface Programmable LEDs Intelligent Connectivity Diagnosis Management Remote Management Trusted Platform Module Virtualization Technology for Directed I/O The ECU-4784 series are TUV IEC and IEEE 1613-certified products that provide high reliability and stability for power automation applications. The fanless robust design, high CPU performance, flexible expansion, rich communication interfaces, and intelligent functions make the ECU-4784 series of industrial PCs suitable to serve as smart substations in harsh environments. Key X86 Architecture with Intel Core i7, i3/celeron Processor The ECU-4784 series are equipped with an Intel Core dual-core i7, i3 (1.7 GHz)/ Celeron (1.6 GHz) processor to ensure high-performance computing and software compatibility. Redundant Power Supply The ECU-4784 series can support two 100 ~ 240V power modules (one built-in module and one optional CTOS module) to ensure the provision of a reliable, independent, and continuous power supply for stable operation. 48V Power for Selection For special industry applications, customers can install a 48V power module through Advantech CTOS. This allows customers to select a specific power supply combination, such as 220 V and 48 V or dual 48V. I/O Expansion Slots The ECU-4784 series feature two standard PCI/PCIe expansion slots (each slot supports 1 x PCIe and 2 x PCI interfaces) to enable customization with flexible UNOP and ECM cards according to the application requirements. Multiple Isolated Communication Interfaces The ECU-4784 series systems can be equipped with up to 26 x isolated serial ports (with UNOP-1628D/1618D), 12 x isolated Ethernet ports (with UNOP-1514), and 6 x isolated USB ports for establishing reliable inter-system connectivity and handling various communication requests. Fast Mass Storage The ECU-4784 features 1 x CFast and 2 x 2.5 hot-swappable SATA interfaces on the rear panel. The integrated SATA controller can support various RAID arrays, including RAID 0, RAID 1, and RAID 5, to maximize data availability and improve storage performance. Versatile Display Interface Both DVI and VGA display interfaces are supported to ensure flexible operation. Programmable LEDs The ECU-4784 series features eight programmable LEDs on the front panel. Intelligent Connectivity Diagnosis Management The ECU-4784 is equipped with an integrated intelligent agent for monitoring the connectivity of serial ports and Ethernet ports. This software function improves system management and maintenance efficiency. Remote Management The ECU-4784 is equipped with Intel Active Management Technology, which enables remote access to the device, storage, desktop, mouse, keyboard, and video functions, regardless of whether the system is powered on or the operating system is functioning. Trusted Platform Module The ECU-4784 motherboard is equipped with a built-in Infineon microchip that prevents unauthorized system access for enhanced security. Virtualization Technology for Directed I/O With VT-D architecture, the system software can assign I/O devices to a protected domain and ensure resource isolation, thereby improving the performance of I/O devices in virtualized environments WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download

12 ECU-4784 CE, FCC, CCC, Electricity IV level for China, IEC , IEEE-1613, UL, CB, LVD Power Requirements Redundant Power Supply Power1: 100 ~ 240 V AC, 100 ~ 240 V DC Power2: 100 ~ 240 V AC, 100 ~ 240 V DC Power Consumption 25 W (ECU-4784-D55SAE/ D56SBE/ C25SAE/ E15SAE) (Typical) Operating System Windows7, Windows8, Windows Server 2008 R2, WES7(WS7P), Windows Server 2012R2, Windows Embedded 8 64-bit, Linux Dimensions (W x D x H) 440 x 280 x 88 mm Enclosure SECC and aluminum Weight 6.0 Kg Mounting 2U RRackmount System Design Fanless System Hardware CPU Memory Indicators Storage Intel Core dual-core i7 4650U, 1.7 GHz (ECU-4784-D55SAE/D56SBE) Intel Celeron 2980U, 1.6 GHz (ECU-4784-C25SAE) Intel Core i3 4010U, 1.7 GHz (ECU-4784-E15SAE) DDR3L 1.35V non-ecc 8G (Up to 16G for ECU-4784-D56SBE) Programmable LEDs for PWR1, PWR2, HDD, LAN (LINK, ACT), COM (TX, RX), Slot 1, and Slot 2 2 x 2.5" SATA HDD (RAID0, RAID1) 1 x CFast socket Display 1 x DB15 VGA, 1 x DVI-D (Resolution: 1920 x 1080) Watchdog Timer Programmable 256 levels time interval, from 1 to 255 seconds for each tier Relay Relay Output Form C Contact 125V AC/ 30V DC Channel 1 Communication Interface Serial Ports Serial Port Speed LAN USB Expansion 2 x RS-232 (DB9 connectors, Standard) 8 x RS-232/422/485 (Terminal Block) 2,500V isolation RS-232: 50 ~ kbps RS-422/485: 50 ~ kbps (Max.) 8 x 10/100/1000 Base-T RJ45 ports (Supports teaming function, PXE, LAN1 supports AMT) 6 x USB, UHCI, rev 2.0 compliant (2 x front, 3 x rear, 1 x internal) (2 x front, rev 3.0 compliant for ECU-4784-D56SBE/E15SAE) 2 x Domain I/O expansion slots (Each slot supports 1 x PCIe and 2 x PCI) Operating Temperature -25 ~ 70 C (-13 ~ 158 F) IEC with 100% CPU/ I/O loading, 24 hrs Operating Humidity 5 ~ 95% RH (non-condensing) Storage Humidity 5 ~ 95% RH (non-condensing) Shock Protection IEC CFast : 30 G half sine,11 ms Vibration Protection IEC (Random 1 Oct./min, 1hr/axis.) CFast : 5 ~ 500Hz ECU-4784-D55SAE ECU-4784-D56SBE ECU-4784-C25SAE ECU-4784-E15SAE Intel Core dual-core i7 4650U (1.7 GHz) processor with 8 GB RAM, 8 x LAN, 10 x COM, 2 x expansion slots Intel Core dual-core i7 4650U (1.7 GHz) processor with 16 GB RAM, 8 x LAN, 10 x COM, 2 x expansion slots Intel Celeron 2980U (1.6 GHz) processor with 8 GB RAM, 8 x LAN, 10 x COM, 2 x expansion slots Intel Core i3 4010U (1.7 GHz) processor with 8 GB RAM, 8 x LAN, 10 x COM, 2 x expansion slots XECU-FSP150-1H35 (*) FSP AC/DC 100 ~ 240V, 150W, W/PFC (Note: Dual power configuration is available upon request via Advantech CTOS) 9893SW0400E (*) DC 36V ~ 72V module (Note: A 48V power module is available upon request via Advantech CTOS) 3-12 Power & Energy Automation

13 ECU-P1628D/1618D UNOP-1624D UNOP-1514RE/PE NEW NEW NEW ECU-P1628D/1618D UNOP-1624D UNOP-1514RE/PE Connector Dimensions Power Consumption 120-pin connector for UNO-4673A/PCI, UNO-4683/PCI, ECU-4784/PCI 5.3" x 6.0" (136 x 150 mm) 5V ± 620mA typical 3.3V ± 75mA typical CE/FCC Communication IRQ All COM ports use the same IRQ assigned by PCI Bus COM Ports 8 x RS-232/422/485 ports Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd Baud-rate (bps) RS-232: 50 ~ kbps RS-422/485: 50 ~ kbps (max.) Data Signals TxD, RxD, RTS, CTS, RI,DSR,DTR,DCD,GND for RS-232 Data+, Data-, GND for RS-485 Tx+, Tx-, Rx+,Rx-, GND for RS-422 Protection Isolation Protection Operating Temp. Operating Humidity Storage Humidity 2500 VDC (ECU-P1628D) -20 ~ 70 C (-4 ~ 158 F) 10 ~ 90% RH non-condensing (refer to IEC ) 5 ~ 95% RH non-condensing (refer to IEC ) ECU-P1618D-AE ECU-P1628D-AE 8-port RS-232/422/485 for UNO-4673A, UNO-4683, ECU port Iso. RS-232/422/485 for UNO-4673A, UNO-4683, ECU-4784 Connector Dimensions Power Consumption Communication IRQ COM Ports Baud rate (bps) Data Signals IRIG Time Code Input IRIG Interface ST Multi-Mode Input Signal Supported Formats 120-pin connector for UNO-4673A/PCI, UNO-4683/PCI, ECU-4784/PCI 5.3" x 6.0" (136 x 150 mm) 5V ± 500mA typical. 3.3V ± 180mA typical. CE/FCC All COM ports use the same IRQ assigned by PCI Bus 4 x RS-232/422/485 ports RS-232: 50 ~ kbps RS-422/485: 50 ~ kbps (Max.) TxD, RxD, RTS, CTS, RI, DSR, DTR, DCD, GND for RS-232Data+, Data-, GND for RS-485Tx+, Tx-, Rx+,Rx-, GND for RS-422 Male 9-pole D-Sub connector (COM4 or IRIG-B) Fiber connector Female BNC RS-422 input signal isolated by optocoupler Optical 820nm; TTL IRIG-B according to IRIG STANDARD , IRIG Time Code Output IRIG Interface Male 9-pole D-Sub connector (COM4 or IRIG-B) Female BNC Output Signal RS-422 output signal; TTL IRIG Time Code Decoding Message syntax YYYYQQQHHMMSS (yr, d, h, min, sec) Resolution of the time 1s Status info 1 status LED for indication Protection Isolation Protection Operating Temp. Operating Humidity Storage Humidity 2500 VDC for COM/IRIG -20 ~ 70 C (-4 ~ 158 F) 10 ~ 90% RH non-condensing (refer to IEC ) 5 ~ 95% RH non-condensing (refer to IEC ) UNOP-1624D-AE 8-Port Isolated/Non Isolated RS-232/422/485 4-Port Isolated RS-232/422/485 with IRIG B 4-Port Gigabit Base Ethernet Card 4-port Iso. RS-232/422/485 and IRIG B for UNO-4673A, UNO-4683, ECU-4784 Connector Bus Interface Dimensions Power Consumption Online Download pin connector for UNO- 4673A/4683 series PCIe, ECU-4784 PCIe PCI Express x 1 compliant 5.3" x 6.0" (136 x 150 mm) 5V 400mA typical CE/FCC UNOP-1514PE Connector SFP Ports 4 Compatibility IEEE Ethernet interface Speed 1000M bps UNOP-1514RE Connector Ports 4 Compatibility Speed Operating Temp. Operating Humidity Storage Humidity RJ45 IEEE Ethernet interface 10/100/1000M bps -20 ~ 70 C (-4 ~ 158 F) 10 ~ 90% RH n on-condensing (refer to IEC ) 5 ~ 95% RH non-condensing (refer to IEC ) UNOP-1514RE-AE UNOP-1514PE-AE Accessories SFP-GTX/RJ45 SFP-GSX/LC SFP-GLX/LC-10 SFP-GLX/LC-20 SFP-GLX/LC-40 4-port RJ45 Gigabit Base Ethernet Card for UNO-4673A, UNO-4683, ECU port SFP Gigabit Base Ethernet Card for UNO-4673A, UNO-4683, ECU Base RJ45 SFP module 1000Base-SX Multi-mode SFP module 1000Base-LX Single-mode SFP module (10 km) 1000Base-LX Single-mode SFP module (20 km) 1000Base-LX Single-mode SFP module (40 km) WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking 3-13

14 ECU-P1524PE 2-Port SFP Gigabit Base Ethernet Card with HSR/PRP CE/FCC certification Supports HSR protocol (IEC , Clause 5) Supports PRP protocol (IEC , Clause 4) PCI Express extension 2 x SFP Interface (for Ethernet communications) 2 x SFP interface (for HSR/PRP) 1 x RJ45 (Interlink) Supports IEEE ~ 70 C operating temperature range The ECU-P1524PE is a PCIe extension card with HSR/PRP functionality for reducing the data transfer packet loss probability and ensuring seamless system switching. The ECU-P1524PE can be integrated with a power and energy automation computer, such as UNO-4673A/4683 or ECU-4784, to provide a redundant Ethernet solution for smart substation applications. Connector BUS Interface Dimensions Power Consumption Communication Interface Ethernet LED Status 120-pin connector for UNO- 4673A/4683/ECU-4784 PCI Express (non-universal interface) 5.3 x 6.0" (136 x 150 mm) 5V ± 1000mA typical 3.3V ± 600mA typical CE, FCC, IEC x SFP (mini-gbic) Ethernet ports with HSR/PRP (Gigabit Base-X, ECU-P1524PE-GAE) 2 x SFP (mini-gbic) Gigabit Base-X Ethernet port 2 x Act/Link (On ECU-4784 front panel) HSR/PRP Mode Selection LED Status Interface Hardware 2 x Act/Link, 1 x HSR, 1 x PRP, 2 x 100M/1000M (On ECU-4784 front panel) 2x SFP (mini-gbic) ports 1x RJ45 (Interlink) Operating Temperature -25 ~ 70 C (-13 ~ 158 F) IEC with 100% CPU/ I/O loading for 24 hours Operating Humidity 5 ~ 95% RH (non-condensing) Storage Humidity 5 ~ 95% RH (non-condensing) ECU-P1524PE-GAE 2-port SFP Gigabit Base-X Ethernet Card with HSR/PRP 3-14 Power & Energy Automation

15 ECU-P ch Isolated Digital Input, 4-ch Isolated Relay Output with IRIG-B Board CE/FCC Certification 4 x Isolated Digital Input 4 x Isolated Relay Output 1 x IRIG-B PCI Extension Operation Temp: -25 ~ 70 C The ECU-P1761 is a PCI extension card with Digital Input and Relay Output function to fulfill the acquisition requirement in power automation. With 4x DI, 4x RO and 1x IRIG-B, ECU-P1761 enrich the Advantech acquisition solution under power & energy x86 architecture UNO-4673A/4683 and ECU-4784 computers. Connector BUS Interface Dimensions Power Requirements Digital Input Channels 4 Connector Terminal Block Input Type Wet Contact (Sink) Input Voltage Logic 0: 0 ~ 10 V Logic 1: 30 ~ 48 V Response time 1ms Isolation Voltage 2,500 V DC IRIG-B IRIG Interface Precision Resolution of time 120-pin connector for UNO- 4673A/4683/ECU-4784 PCI 5.3" x 6.0" (136 x 150 mm) ma (typical) ma (typical CE, FCC, IEC Compliant BNC 1ms 1s Relay Output Channels 4 Connector Terminal Block Output Type Relay: 1 Form C Relay Output Voltage 250 V AC /V DC Max. Switching Voltage 400 V AC Relay Output Current 25 C 3A, 70 C 1A Operate/ Release Time Max. 8 ms Isolation Voltage 2500 V DC Operating Temperature -25 ~ 70 C (-13 ~ 158 F) IEC with 100% CPU/ I/O loading, 24 hrs Operating Humidity 5 ~ 95% RH (non-condensing) Storage Humidity 5 ~ 95% RH (non-condensing) ECU-P1761A-AE 4-ch DI, 4-ch RO Isolated Board with IRIG-B WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download

16 ECU-1152 NEW TI Cortex A8 Industrial Communication Gateway with 2 x LAN and 6 x COM Ports TI Cortex A8 800 MHz CPU DDR3L512 MB RAM 1 GB Micro SD card for system storage 1 x Micro SD slot 6 x RS-232/485 isolated serial ports 2 x 10/100 Base-T Ethernet ports 1 x Mini-PCIe for Wi-Fi/3G/GPRS/4G Supports web access for remote online monitoring Supports SD cards and online firmware updates Supports Modbus and IEC /104 protocols Supports data logging to SD card RTLinux operating system -40 ~ 70 C operating temperature range 3-16 For solar power, electricity, and factory-related applications that require comprehensive wireless and Ethernet communication solutions, Advantech developed its ECU-1152 RISC-based industrial communication gateway. ECU-1152 features an open platform design with a Cortex A8 processor, six RS-232/485 isolated serial ports, two 10/100 Ethernet ports, and an operating temperature of -40 ~ 70 C. ECU-1152 is equipped with a Linux operating system and open TagLink SDK to enable system integrators to develop applications specific for their application requirements. Mounting Power Consumption Power Requirements System CPU Memory Indicators Storage SD Slot Watchdog Real-Time Clock Node ID Communication Serial Port Serial Port Speed Ethernet Port USB Port Wireless (Optional) Software CE, FCC Wall/ DIN rail 24V DC (typical) 10 ~ 30 V DC TI Cortex A8, 800MHz DDR3L 512MB Programmable LEDs for Power, LAN (LINK, ACT), Serial (Tx, Rx) 1 GB Micro SD card for system storage 1 x Micro SD Yes Yes 8-bit 6 x RS-232/485 Isolation 3000 V DC RS-232/RS-485: 50 ~ kbps 2 x 10/100 Base-T RJ-45 ports 1 x USB Interface: 1x Mini PCIe (full size) Type: Wi-Fi/3G/GPRS/4G Signal: USB OS Support RTLinux 3.12 Configuration Tool Advantech TagLink Studio Protocol Support Modbus, IEC (master)/ 104(slave) Programming Linux C Operating Temperature -40 ~ 70 C Storage Temperature -40 ~ 85 C Humidity 5 ~ 95% (non-condensing) Power & Energy Automation ECU-1152-R11ABE T001 Wi-Fi Solution 9656EWMG00E EWM-W150H02E TI Cortex A8 industrial communication gateway with 2 x LAN, 6 x COM, 1 x Mini PCIe DIN-Rail buckle Half to full-size Mini PCIe bracket pack Half-size mini card, supports bgn SMA(M) cable, 15 cm 2dBi antenna for testing, 11 cm 3G/GPRS Solution (SIM card not included) EWM-C109F601E 6-band HSPA cellular module with SIM holder SMA(F) cable, 15 cm Dipole antenna, 11 cm Storage Solution SQF-ISDS1-4G-82E SQF-ISDS1-32G-82E Dimensions R1.75 R SLC 4G, 1CH (-40 ~ 85 C) SLC 32G, 1CH (-40 ~ 85 C) for reference Unit: mm

17 ECU-4553 TI Cortex4 A8 Power Automation Computer with 4 x LAN, 18 x COM Ports TI Cortex A8 800MHz CPU DDR3L 1GB RAM 1GB Micro-SD card for system storage; 1 x Micro-SD Slot 1 x IRIG-B 18 x RS-232/485 isolated serial ports 4 x 10/100 Base-T Ethernet ports 2 x CAN2.0 Support SD card & on-line firmware update Support Modbus, IEC /104 protocol Support Data logger on SD card Operation System: RT-Linux Operation Temperature -40 ~ 70 C For solar power, electricity and factory related applications which require Ethernet and Serial Port communication solutions, Advantech has released the ECU-4553 RISC-based industrial communication gateway. ECU-4553 has an open platform design with Cortex A8 processor, 18xRS-232/485 isolated serial ports, 4x10/100 Ethernet ports and operating temperature range from -40 to 70 C.WithLinux operating system and open TagLink SDK, which enable to system integrators to develop applications which precisely ft their need. CE, FCC Mounting Wall-Mount Power Consumption (typical) 10 W Power Requirements 100 ~ 240 V AC, 100 ~ 240 V DC System NEW CPU Memory Indicators Storage SD Slot Watchdog Real-time clock Node ID Communication Serial Port Isolation Serial Port Speed Ethernet Port USB Port CAN Isolation IRIG Time Code Input TI Cortex A8, 800MHz DDR3L 1GB LEDs for Power, LAN (LINK, ACT), Serial (Tx, Rx), Programmable 1GB Micro-SD card for system storage 1 x Micro-SD slot Yes Yes 8-bit 18 x RS-232/48 5 (Terminal Block) 3000 V DC RS-232/RS-485: 50 ~ kbps 4 x 10/100 Base-T RJ-45 ports 1 x USB 2 x CAN2.0 B 3000 V DC IRIG Interface Terminal Block (COM1 or IRIG-B) Input Signal RS-232/RS-48 5 Supported Formats IRIG-B according to IR IG STANDARD , Software OS Support RT-Linux 3.12 Configuration Tool Advantech TagLink Studio Protocol Support Modbus, IEC (master)/ 104(slave) Programming Linux C Operating Temperature -40 ~ 70 C Storage Temperature -40 ~ 85 C Humidity 5 ~ 95% (non-condensing) ECU-4553-R12SBE Storage Solution SQF-ISDS1-4G-82E SQF-ISDS1-32G-82E TI Cortex A8 Power Automation Computer with 4 x LAN, 18 x COM, 2 x CAN, 1 x IRIG-B SLC 4G, 1CH (-40 ~ 85 C) SLC 32G, 1CH (-40 ~ 85 C) for your reference WebAccess + Solution Intelligent Motion Control and Machine Vision Power & Energy Automation Industrial Operator Panels Thin-Client Terminals High-Performance Control Panels Control Cabinet PCs Industrial IoT Gateways Industrial monitors idoor Technology Modules Panel PCs Control IPCs Remote DA&C Systems Wireless IoT Sensing Devices Ethernet I/O Modules RS-485 I/O Modules Industrial Ethernet Solutions IP Gateway and Serial Device Servers inetworking Online Download

18 WISE-M501 WISE-M502 Multifunction Panel Mount Smart Power Meter Multi-Loop DIN Rail Smart Power Meter WISE-M501 WISE-M502 WISE-M500 series power meters are easy to use, cost effective smart meters, that provide high accuracy measurement, display and communication (Modbus RTU). Characterized by their compact size, and flexible connection mode. WISE-M500 series meters are ideal for power monitoring operations and equipment preventative maintenance. Input Measurement Type Phase & Wiring Input range Max. Input over Input burden Accuracy & Resolution True RMS measurement 1P2W/ 1P3W/ 3P3W (2 3CT)/ 3P4W; Balanced/ Unbalance Programmable by front buttons(actual wiring must be same) Voltage 40 ~ 400 VLN ; 60 ~ 600VLL PT Primary range: 100 ~ V PT Secondary range: 100 ~ 600V Current: 0 ~ 5A CT Primary range: 5 ~ 9999A Frequency: 45 ~ 65Hz Voltage:2 X rated continuous: 2500V, 1 sec Current: 2 X rated continuous: 20 X rated 1 sec Voltage: < 0.2VA, Current: < 0.1VA Parameter Accuracy Resolution Parameter Accuracy Resolution Voltage 0.25% 0.1 V Power Factor 0.5% Current 0.25% A Frequency 0.2% 0.01 Hz Natural Current 1.0% A Active Energy 0.5% 0.1 kwh Active Power 0.5% 1 W Reactive Energy 0.5% 0.1 kvarh Reactive Power 0.5% 1 Var THD 1.0% 0.1% Apparent Power 0.5% 1 VA Communication RS485 port al Operating Temp. Operating Hum(%RH) Storage Temperature Up to bauds, Modbus RTU 0 ~ 60 C 5 ~ 95%RH, non-condensing -10 ~ 70 C EN 61326:2006, EN :2010 Dimension(W x D x H) 96 mm x 96 mm x 63 mm Power Requirements AC 85 ~ 264V / DC 100 ~ 300V Power consumption AC: 10W / DC: 230V Mechanical Panel cutout Case material Enclosure Mounting Weight 90 mm(w) x 90 mm(h) Black PC (non-flammable) Front panel: IEC 529 (IP50) Housing: IP20 Panel mounting 400 g Input Measurement Type Phase & Wiring Input range Max. Input over Input burden Accuracy & Resolution True RMS measurement 1P2W/ 1P3W/ 3P3W/ 3P4W; Voltage:50 ~ 500V PT Primary range:50 ~ 99.99kV PT Secondary range:50 ~ 500V Current:Depends on external CT CT Primary range:1 ~ 9999A Frequency:45 ~ 65Hz Voltage 1.2 X rated continuous(600v max) Current: Clamp CT Specification1.2X Rate Voltage:< 0.2VA;Current:< 0.1VA Parameter Accuracy Resolution Parameter Accuracy Resolution Voltage 0.25% 0.1 V Apparent Power 0.5% 1 VA Current 0.25% A Power Factor 0.5% Natural Current 1.0% A Frequency 0.2% 0.01 Hz Active Power 0.5% 1 W Active Energy 0.5% 0.1 kwh Reactive Power 0.5% 1 Var Reactive Energy 0.5% 0.1 kvarh Communication RS485 port al Operating Temp. Operating Hum(%RH) Storage Temperature Up to bauds, Modbus RTU 0 ~ 60 C 0 ~ 80%RH, non-condensing -20 ~ 70 C EN 61326:2006, EN :2010 Dimension(W x D x H) 54 mm x 65.5 mm x 81 mm Power Requirements AC 85 ~ 346V / DC 100 ~ 300V (50 / 60Hz) Power Consumption AC: 10W / DC: 4W Mechanical Case Material Mounting Weight PC fireproof DIN rail 185 g WISE-M C060E WISE-M C060E WISE-M501-A5V6E 5-Loop Single Phase DIN-Rail Power Meter 2-Loop Three Phase DIN-Rail Power Meter Multi-function Panel Mount Power Meter 3-18 Power & Energy Automation