BIOS SETUP UTILITY. v02.54 (C) Copyright , American Megatrends, Inc. BIOS SETUP UTILITY

Size: px

Start display at page:

Download "BIOS SETUP UTILITY. v02.54 (C) Copyright , American Megatrends, Inc. BIOS SETUP UTILITY"

Matilda Ford
5 years ago
Views:

1 1

2 Main OC Tweaker Advanced H/W Monitor Boot Security Exit System Overview System Time System Date BIOS Version Processor Type Processor Speed : 3400MHz Microcode Update : 1067A/A07 Cache Size : 1024KB Total Memory DDRII_A1 DDRII_B1 DDR3_A1 DDR3_B1 [ 14:00:09] [Mon 11/16/2009] : P43C-ME P1.00 : Intel (R) CPU 3.40GHz (64bit) : 1024MB Single-Channel Memory Mode : 1024MB/400MHz DDR2_800 :None :None :None Use [Enter], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system Time. +- Change Field Tab Select Field Main OC Tweaker Advanced H/W Monitor Boot Security Exit OC Tweaker Settings Load Optimized CPU OC Setting [Press Enter] DRAM Frequency DRAM Timing Control Ratio Status Ratio CMOS Setting 17 Intel (R) SpeedStep (tm) tech. Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Unlocked (Min:12, Max:17) [17] [266] [100] Vcore : 1.232V CPU Voltage DRAM Voltage GTLRef Voltage NB Voltage SB Core Voltage 1.96 V 0.63Vtt 1.11V 1.52V Overclocking may cause damage to your CPU and motherboard. It should be done at your own risk and expense. Enter Go to Sub Screen 2

3 OC Tweaker DRAM Timing Control DRAM tcl DRAM trcd DRAM trp DRAM tras DRAM trfc DRAM twr DRAM twtr DRAM trrd DRAM trtp DRAM tcl Value Min=3 Max = 7 +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit 3

4 4

5 5

6 Main OC Tweaker Advanced H/W Monitor Boot Security Exit Advanced Settings Options for CPU WARNING : Setting wrong values in below sections may cause system to malfunction. CPU Configuration Chipset Configuration ACPI Configuration Storage Configuration PCIPnP Configuration Floppy Configuration SuperIO Configuration USB Configuration BIOS Update Utility ASRock Instant Flash Enter Go to Sub Screen 6

7 Advanced CPU Configuration Overclock Mode CPU Frequency (MHz) PCIE Frequency (MHz) Boot Failure Guard Spread Spectrum [200] [100] Ratio Status Unlocked (Min:12, Max:17) Ratio CMOS Setting 17 [17] Enhanced Halt State Intel (R) Virtualization tech. CPU Thermal Throttling No-Execute Memory Protection Intel (R) SpeedStep (tm) tech. Intel (R) C-STATE tech On-Demand Clock Modulation This should be enabled in order to enable or disable the Enhanced Halt State. +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit 7

8 8

9 9

10 Chipset Settings Advanced DRAM RCOMP and trd Configuration DRAM DLL SKEW Configuration Intelligent Energy Saver Primary Graphics Adapter Onboard HD Audio Front Panel OnBoard Lan CIR10 Field 1 [PCI] +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit Advanced DRAM RCOMP Settings DRAM CH0 RCOMP Settings : DRAM CH0 RCOMP ODT DRAM CH0 G0 (Data) DRAM CH0 G1 (Command) DRAM CH0 G2 (Control1) DRAM CH0 G3 (Control2) DRAM CH0 G4 (Clocks1) DRAM CH0 G5 (Clocks2) DRAM CH1 RCOMP Settings : DRAM CH1 RCOMP ODT DRAM CH1 G0 (Data) DRAM CH1 G1 (Command) DRAM CH1 G2 (Control1) DRAM CH1 G3 (Control2) DRAM CH1 G4 (Clocks1) DRAM CH1 G5 (Clocks2) DRAM CH0 RCOMP ODT Value Min=1 Max Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit 10

11 11

12 Advanced DRAM DLL SKEW Settings DRAM CH0 CLKSET0 SKEW Info: DRAM CH0 CLKSET0 SKEW DRAM CH0 CLKSET1 SKEW Info: DRAM CH0 CLKSET1 SKEW DRAM CH0 CMD SKEW Info: DRAM CH0 CMD SKEW DRAM CH0 CTRL0 SKEW Info: DRAM CH0 CTRL0 SKEW DRAM CH0 CTRL1 SKEW Info: DRAM CH0 CTRL1 SKEW DRAM CH0 CTRL2 SKEW Info: DRAM CH0 CTRL2 SKEW DRAM CH0 CTRL3 SKEW Info: DRAM CH0 CTRL3 SKEW DRAM CH1 CLKSET0 SKEW Info: Auto -350 ps -300 ps -250 ps -200 ps -150 ps -100 ps -50 ps Normal Options +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit 12

13 13

14 14

15 Advanced ACPI Configuration Suspend To RAM Repost Video on STR Resume Check Ready Bit Restore on AC/Power Loss Ring-In Power On PCI Devices Power On PS / 2 Keyboard Power On RTC Alarm Power On ACPI HPET Table [No] [Power Off] Select auto-detect or disable the STR feature. +- Change Option 15

16 Advanced Storage Configuration SATAII Configuration Configure SATAII as OnBoard IDE Controller SATAII 1 SATAII 2 SATAII 3 SATAII 4 SATAII 5 SATAII 6 IDE1 Master IDE1 Slave AHCI CD/DVD Boot Time out [35] [Enhanced] [IDE] [Hard Disk] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] [Not Detected] Options Disabled Compatible Enhanced +- Change Option F1 General Help F9 Load Defaults F10 Save and Exit ESC Exit v02.54 (C) Copyright , American Megatrends, Inc. Advanced Primary IDE Master Device Vendor Size LBA Mode Block Mode PIO Mode Async DMA Ultra DMA S.M.A.R.T. Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer :Hard Disk :ST340014A :40.0 GB :Supported :16Sectors :4 :MultiWord DMA-2 :Ultra DMA-5 :Supported Select the type of device connected to the system. +- Change Option 16

17 17

18 Advanced Advanced PCI / PnP Settings PCI Latency Timer PCI IDE BusMaster [32] ValueinunitsofPCI clocks for PCI device latency timer register. +- Change Option Advanced Floppy Configuration 1 Floppy A [1.44 MB 3 2 "] Select the type of floppy drive connected to the system. +- Change Option 18

19 Advanced Configure Super IO Chipset OnBoard Floppy Controller Serial Port Address Infrared Port Address Parallel Port Address Parallel Port Mode EPP Version ECP Mode DMA Channel Parallel Port IRQ [3F8 / IRQ4] [378] [ECP + EPP] [1.9] [DMA3] [IRQ7] Allow BIOS to Enable or Disable Floppy Controller. +- Change Option 19

20 Advanced USB Configuration USB Controller USB 2.0 Support Legacy USB Support To enable or disable the onboard USB controllers. +- Change Option 20

21 Main OC Tweaker Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature M / B Temperature : 37C/98F : 31C/87F Enable/Disable CPU Quiet Fan Function. CPU Fan Speed Chassis Fan Speed Power Fan Speed : 3400 RPM : 3399 RPM : 3288 RPM Vcore V V V CPU Quiet Fan : 1.629V : 3.306V : 5.067V : V F1 F9 F10 ESC General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright , American Megatrends, Inc. 21

22 Main OC Tweaker Advanced H/W Monitor Boot Security Exit Boot Settings Boot Settings Configuration Configure Settings during System Boot. 1st Boot Device Hard Disk Drives [HDD:5M-Hitachi HDS] Enter Go to Sub Screen Boot Boot Settings Configuration Full Screen Logo AddOn ROM Display Boot Logo Boot From Onboard LAN Bootup Num-Lock [On] Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead of POST messages. + - Change Option v02.54 (C) Copyright , American Megatrends, Inc. 22

23 Main OC Tweaker Advanced H/W Monitor Boot Security Exit Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Install or Change the password. Enter Change 23

24 Main OC Tweaker Advanced H/W Monitor Boot Security Exit Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes Load BIOS Defaults Load Performance Setup Default (IDE/SATA) Load Performance Setup AHCI Mode Load Power Saving Setup Default Exit system setup after saving the changes. F10 key can be used for this operation. Enter Go to Sub Screen 24

BIOS SETUP UTILITY. v02.54 (C) Copyright , American Megatrends, Inc.

BIOS SETUP UTILITY. v02.54 (C) Copyright , American Megatrends, Inc. 1 BIOS SETUP UTILITY Main OC Tweaker Advanced H/W Monitor Boot Security Exit System Overview System Time System Date BIOS Version Processor Type Processor Speed : 1200MHz Microcode Update : 1067A/A07 Cache