P5VD1-X. Motherboard

Size: px

Start display at page:

Download "P5VD1-X. Motherboard"

Felix Phelps
5 years ago
Views:

1 P5VD1-X Motherboard

2 T

3 3

4 4

5 5

6 6

7 7

8 Jumper Mode Jumper Free (Default) 8

9 P5GD1-TAYZ XX11XX11 9

10 10

11 11

12 12

15 1-1

16 1-2

17 1-3

18 1-4

21 SB_PWR P5VD1-X P5VD1-X Onboard LED ON Standby Power OFF Powered Off 2-1

22 P5VD1-X 2-2

23 22.9cm( 9.0in) PS/2KBMS T: Mouse B: Keyboard ATX12V SPDIF_O COM1 PARALLEL PORT USB12 LAN_USB34 Top:Line In Center:Line Out Below:Mic In Intel 82540EM USBPW12 USBPW34 CPU_FAN CR2032 3V Lithium Cell CMOS Power LGA775 VIA PT880Ultra AGP P5VD1-X PCIEX16 DDR DIMM_A1 (64 bit,184-pin module) DDR DIMM_A2 (64 bit,184-pin module) DDR DIMM_B1 (64 bit,184-pin module) VIA VT8237R DDR DIMM_B2 (64 bit,184-pin module) PRI_IDE EATXPWR SEC_IDE 30.5cm (12.0in) PCI1 CHA_FAN AD1888 CD AUX FP_AUDIO PCI2 SB_PWR PCI3 4Mb BIOS USBPW56 USBPW78 Super I/O SATA1 SATA2 CLRTC FLOPPY USB56 USB78 GAME PANEL 2-3

24 P5VD1-X P5VD1-X CPU Socket

25 A B B A 2-5

26 A B 2-6

27 2-7

28 B A A A B B B A CPU_FAN P5VD1-X GND CPU FAN PWR CPU FAN IN CPU FAN PWM P5VD1-X CPU Fan connector 2-8

29 80 Pins DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 P5VD1-X 104 Pins P5VD1-X 184-pin DDR DIMM sockets 2-9

30 2-10

31 2-11

33 2-13

34 2-14 A B C D E F G H

35 P5VD1-X Keyed for 1.5v P5VD1-X Accelerated Graphics Port (AGP) 2-15

36 2-16

37 2-17

38 P5VD1-X CLRTC P5VD1-X Clear RTC RAM Normal (Default) Clear CMOS 2-18

39 USBPW12 USBPW P5VD1-X +5V +5VSB (Default) USBPW56 USBPW P5VD1-X USB device wake up +5V (Default) +5VSB 2-19

41 2-21

42 R R FLOPPY P5VD1-X PIN 1 P5VD1-X Floppy disk drive connector PRI_IDE SEC_IDE P5VD1-X PIN 1 P5VD1-X IDE connectors 2-22

43 SATA1 SATA2 P5VD1-X GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXP1 RSATA_RXN1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXP2 RSATA_RXN2 GND P5VD1-X SATA connectors 2-23

44 CPU_FAN CHA_FAN P5VD1-X GND CPU FAN PWR CPU FAN IN CPU FAN PWM GND +12V Rotation P5VD1-X Fan connectors P5VD1-X USB+5V USB_P6- USB_P6+ GND NC USB+5V USB_P8- USB_P8+ GND NC P5VD1-X USB 2.0 connectors USB56 1 USB+5V USB_P5- USB_P5+ GND USB78 1 USB+5V USB_P7- USB_P7+ GND 2-24

45 ATXPWR P5VD1-X +3 Volts ATX12V +12 Volts GND +12V DC +12 Volts +5V Standby Power OK Ground GND +12V DC +5 Volts Ground +5 Volts Ground +3 Volts P5VD1-X ATX power connectors +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts 2-25

46 P5VD1-X Left Audio Channel Ground Ground Right Audio Channel CD(Black) AUX(White) Left Audio Channel Ground Ground Right Audio Channel P5VD1-X Internal audio connectors P5VD1-X +5V J1B2 J1CY GND GND J1CX J1B1 +5V GAME P5VD1-X Game connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V 2-26

47 P5VD1-X FP_AUDIO P5VD1-X Front panel audio connector MIC2 AGND MICPWR +5VA Line out_r BLINE_OUT_R NC Line out_l BLINE_OUT_L 2-27

48 PANEL PLED PLED+ +5V SPEAKER Ground Ground Speaker P5VD1-X RESET IDE_LED PWRSW * Requires an ATX power supply. P5VD1-X System Panel connector PLED- IDE_LED+ IDE_LED- PWR Ground Reset Ground 2-28

51 3-1

52 3-2

55 4-1

56 EZFlash starting BIOS update Checking for floppy... EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file P5VD1-X.ROM. Completed. Start erasing... Start Programming... Flashed successfully. Rebooting. 4-2

58 A:\>afudos /ip5vd1-x.rom A:\>afudos /ip5vd1-x.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file... done Erasing flash... done Writing flash... 0x0008CC00 (9%) A:\>afudos /ip5vd1-x.rom AMI Firmware Update Utility - Version 1.10 Copyright (C) 2002 American Megatrends, Inc. All rights reserved. Reading file... done Erasing flash... done Writing flash... 0x0008CC00 (9%) Verifying flash.. done A:\> 4-4

59 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy found! Reading file P5VD1-X.ROM. Completed. Start flashing

60 Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Bad BIOS checksum. Starting BIOS recovery... Checking for floppy... Floppy not found! Checking for CD-ROM... CD-ROM found. Reading file P5VD1-X.ROM. Completed. Start flashing

61 4-7

62 4-8

63 4-9

64 4-10

65 System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Fourth IDE Master :[Not Detected] IDE Configuration System Information Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit 4-11

66 System Time [11:10:19] System Date [Thu 03/27/2003] Legacy Diskette A [1.44M, 3.5 in] Language [English] Primary IDE Master :[ST320413A] Primary IDE Slave :[ASUS CD-S340] Secondary IDE Master :[Not Detected] Secondary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Fourth IDE Master :[Not Detected] IDE Configuration System Information Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to configure system time. Select Screen Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit Advanced Chipset settings WARNING: Setting wrong values in the sections below may cause system to malfunction. Configure DRAM Timing by SPD Memory Acceleration Mode DRAM Idle Timer DRAm Refresh Rate [Enabled] [Auto] [Auto] [Auto] Graphic Adapter Priority [AGP/PCI] Graphics Aperture Size [ 64 MB] Spread Spectrum [Enabled] ICH Delayed Transaction [Enabled] MPS Revision [1.4] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-12

67 System Time [11:51:19] System Date [Thu 05/07/2004] Legacy Diskette A [1.44M, 3.5 in] Legacy Diskette B [Disabled] Primary IDE Master :[ST320413A] Primary IDE Slave :[Not Detected] Third IDE Master :[Not Detected] Third IDE Slave :[Not Detected] Fourth IDE Master :[Not Detected] Fourth IDE Slave :[Not Detected] IDE Configuration System Information 4-13

68 Primary IDE Master Device : Hard Disk Vendor : ST320413A Size : 20.0GB LBA Mode : Supported Block Mode : 16 Sectors PIO Mode : Supported Async DMA : MultiWord DMA-2 Ultra DMA : Ultra DMA-5 SMART Monitoring: Supported Type [Auto] LBA/Large Mode [Auto] Block(Multi-sector Transfer) [Auto] PIO Mode [Auto] DMA Mode [Auto] Smart Monitoring [Auto] 32Bit Data Transfer [Disabled] 4-14

69 AMIBIOS Version : Build Date : 04/07/04 Processor Type : Genuine Intel(R) CPU 3.20GHz Speed : 2800 MHz Count : 1 System Memory Size : 512MB 4-15

70 JumperFree Configuration USB Configuration Configure CPU. CPU Configuration Chipset Onboard Devices Configuration PCI PnP Configure System Frequency/Voltage AI Overclocking Tuner [Manual] CPU Frequency [200] AGP/PCI Frequency [Auto] Spread Spectrum [OverSpectrum 0.30%] Select the target CPU frequency, and the relevant parameters will be auto-adjusted. Frequencies higher than CPU manufacturer recommends are not guaranteed to be stable. If the system becomes unstable, return to the default. 4-16

71 USB Configuration Module Version USB Devices Enabled: 1 Mouse USB 1.1 Ports Configuration [USB 8 Ports] USB 2.0 Ports Enable [Enable] VIA USB Device Function Enable [Disabled] Legacy USB Support [Enabled] Port 64/60 Emulation [Disabled] USB 2.0 Controller Mode [FullSpeed] BIOS EHCI Hand-Off [Enabled] 4-17

72 Configure Advanced CPU settings Manufacturer: Intel Brand String: Genuine Intel(R) CPU 3.20GHz Frequency : 3200 MHz FSB Speed : 800 MHz Cache L1 : 16 KB Cache L2 : 1024 KB Cache L3 : 0 KB Ratio Status: Unlocked Ratio Actual Value : 16 Ratio CMOS Setting: [16] Max CPUID Value Limit: [Disabled] Hardware Prefetcher [Enabled] Adjacent Cache Line Prefetch [Enabled] CPU Internal Thermal Control [Auto] Hyper Threading Technology [Disabled] Sets the ratio between CPU Core Clock and the FSB Frequency. NOTE: If an invalid ratio is set in CMOS then actual and setpoint values may differ. Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-18

73 Advanced Chipset Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Options for VIA PT880U NorthBridge VIA PT880Ultra Configuration SouthBridge VIA VT8237R Configuration Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit DRAM Clock/Timing Configuration AGP & P2P Bridge Configuration V-Link & PCI Bus Configuration Options for DRAM Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-19

74 DRAM Frequency [Auto] DRAM Timing [Manual] DRAM CAS Latency [2.5] Precharge to Active(Trp) [4T] Active to Precharge(Tras) [7T] Active to CMD(Trcd) [4T] DRAM BUS Selection [Auto] Manual DRAM Frequency Setting or AUTO by SPD Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-20

75 AGP 3.0 Mode AGP Fast Write AGP Aperture Size Primary Graphics Adapter [8X] [Enabled] [128MB] [PCI Express] Select Option To Set AGP MODE Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit V-Link mode selection [Mode 1] V-Link Data 2X Support [Disabled] Select V-Link Mode Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-21

76 PCI Delay Transaction OnBoard SATA-IDE RAID BIOS Execute Onboard AC 97 [Disabled] [RAID] [Enabled] [Enabled] Options for DRAM Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-22

77 Configure Win627EHF Super IO Chipset Serial Port2 Address [2F8/IRQ3] Serial Port2 Mode [Normal] Parallel Port Address [378] Parallel Mode [ECP] ECP Mode DMA Channel [DMA3] Parallel Port IRQ [IRQ7] OnBoard Game.MIDI Port [Disabled] OnBoard LAN [Enabled] Onboard LAN Boot ROM [Disabled] Allow BIOS to Select Serial Port2 Base Addresses. 4-23

78 Advanced PCI/PnP Settings WARNING: Setting wrong values in below sections may cause system to malfunction. Plug And Play O/S [No] PCI Latency Timer [64] Allocate IRQ to PCI VGA [Yes] Palette Snooping [Disabled] IRQ-3 assigned to [PCI Device] IRQ-4 assigned to [PCI Device] IRQ-5 assigned to [PCI Device] IRQ-7 assigned to [PCI Device] IRQ-9 assigned to [PCI Device] IRQ-10 assigned to [PCI Device] IRQ-11 assigned to [PCI Device] IRQ-14 assigned to [PCI Device] IRQ-15 assigned to [PCI Device] Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-24

79 Suspend Mode ACPI 2.0 Support ACPI APIC Support APM Configuration Hardware Monitor [S1 (POS) only] [No] [Enabled] Configure CPU. 4-25

80 Power Management [Enabled] Power Button Mode [On/Off] Restore on AC Power Lose [Last State] Advanced Resume Events Control Resume on Ring [Disabled] Resume on PME# [Disabled] Resume on KB [Disabled] Wake-Up Key [Any Key] Resume on By PS/2 Mouse [Disabled] Resume on RTC Alarm [Disabled] Enabled or disable APM. 4-26

81 Hardware Monitor CPU Temperature [48ºC/118.5ºF] MB Temperature [32ºC/89.5ºF] CPU Fan Speed [2393 RPM] CPU Q-Fan Control [Disabled] CPU Target Temperature [50 C] Chassis Fan Speed [N/A] VCORE Voltage [ 1.376V] 3.3V Voltage [ 3.296V] 5V Voltage [ 5.208V] 12V Voltage [11.510V] CPU Temperature Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit 4-27

82 4-28

83 APM Configuration Boot Device Priority Boot Settings Configuration Security Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device [1st FLOPPY DRIVE] [PM-ST330620A] [PS-ASUS CD-S360] 4-29

84 Boot Settings Configuration Quick Boot Full Screen Logo AddOn ROM Display Mode Bootup Num-Lock PS/2 Mouse Support Wait For F1 If Error Hit DEL Message Display Interrupt 19 Capture [Enabled] [Enabled] [Force BIOS] [On] [Auto] [Enabled] [Enabled] [Disabled] Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system. 4-30

85 Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Boot Sector Virus Protection [Disabled] <Enter> to change password. <Enter> again to disabled password. 4-31

86 Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password User Access Level [Full Access] Change User Password Clear User Password Password Check [Setup] Boot Sector Virus Protection [Disabled] Select Screen Select Item 4-32

87 Exit Options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults Exit system setup after saving the changes. F10 key can be used for this operation. Select Screen Select Item Enter Go to Sub-screen F1 General Help F10 Save and Exit ESC Exit 4-33

88 4-34

91 5-1

92 5-2

93 5-3

94 5-4

95 5-5

96 5-6

97 5-7

98 5-8

99 5-9

100 VIA Tech. RAID BIOS Ver 1.xx Auto Setup For Data Security Array Mode RAID 1 (Mirroring) Select Disk Drives Start Create Process Create a RAID array with the hard disks attached to VIA RAID controller F1 : View Array/Disk Status, : Move to next item Enter : Confirm the selection ESC : Exit Channel Drive Name Array Name Mode Size(GB) Status Serial_Ch0 Master XXXXXXXXXXX ARRAY 0 SATA XXXXXXX Serial_Ch1 Master XXXXXXXXXXX ARRAY 0 SATA XXXXXXX 5-10

101 RAID 0 for performance RAID 1 for Data Protection RAID SPAN for capacity Auto create array will destroy all data on disks, Continue? (Y/N) 4K 8K 16K 32K 64K The data on the selected disks will be destroyed. Continue? Press Y/N 5-11

102 RAID 0 for performance RAID 1 for Data Protection RAID 0/1 RAID SPAN for capacity Auto create array will destroy all data on disks, Continue? (Y/N) Save the data on source disk to mirror after creation? (Y/N) Duplicating... RAID 1 for data protection Press Yes(Y) to Escape The data on the selected disks will be destroyed. Continue? (Y/N) 5-12

103 5-13

104 5-14

P4B533-X. Motherboard

P4B533-X. Motherboard P4B533-X Motherboard C1458 2003 2 3 4 5 6 7 1 2 2 3 Jumper Mode Jumper Free (Default) 8 9 10 1-1 1-2 1-3 1-4 SB_PWR1 P4B533-X P4B533-X Onboard LED ON Standby Power OFF Powered Off 1-5 CPU_FAN1 ATX12V1