AP22 Wi-Fi Access Point

Transcription

1 Wi-Fi Access Point Quick Start Guide Package Contents (main unit) 1 PoE Adapter 1 Ethernet Cable (Optional) 1 Quick Start Guide 1 For advanced settings and more detailed information, download the user manual from

2

3 1. Hardware Overview External Antenna Ports LEDs LAN Ports -1C-E -1C-13-1C-19-1C-E Available Models MODEL -1C-E -1C-13-1C-19-1C-EU -1C-13U -1C-19U DESCRIPTION, external antenna, integrated 13dBi antenna, integrated 19dBi antenna, external antenna, data USB, integrated 13dBi antenna, data USB, integrated 13dBi antenna, data USB Interface Description INTERFACE Antenna LAN Port LEDs DESCRIPTION Integrated or external antenna depending on the model. One local area network (LAN) port providing connection through Cat5e cables, depending on the model. Three LEDs indicating the device status. Refer section LED Behavior. 3

4 LED Behavior LED COLOR STATUS DESCRIPTION POWER Green On Indicates that is powered-up. WAN Green Blinking On WLAN Green Blinking Indicates that data is being transferred. Indicates that WAN link is up. Indicates that the wireless mode is enabled. By default this LED glows. Caution and Warnings Use the PoE adapter included with the product. Using a different PoE adapter may damage the product. 4

5 2. Installing Internet PoE Adapter Switch STEP 1 Connect one end of an RJ45 Ethernet cable to the LAN OUT port of the PoE adapter and the other end to LAN of. STEP 2 Connect the RJ45 Ethernet cable attached to the PoE adapter to a network device, such as to a switch or to the system you use to configure. STEP 3 Connect the PoE adapter to the main electrical supply and the power plug into the socket of the adapter. Now, turn on the power supply. The POWER LED glows. This indicates that is receiving power through the PoE adapter and that connection between and your network has been established. inote: In case any LED does not operate, then refer to the Quick Troubleshooting section. Congratulations! The installation of is complete. 5

6 3. Configuring STEP 1 Power-up. STEP 2 Configure your system with IP address between to and subnet mask to be STEP 3 Type the URL in the Internet Explorer 6.0 or above version to access the web interface. STEP 4 Provide user name as admin and password as password. STEP 5 Click Setup Wizard in the navigation panel to view the Setup Wizard page. Please refer to Configuration and User Guide for more details. 6

7 4. Quick Troubleshooting PROBLEM PROBABLE REASON RESOLUTION The WLAN LED is not blinking when is powered-up. The WAN connectivity is down. Check if all the cables are plugged properly. The POWER LED is Off. has no power. Ensure that the power cord is properly connected to. Check that the PoE adapter is properly connected to the functioning power outlet. Ensure that you are using the same PoE adapter supplied with. 7

8 Warranty This warranty is valid upto 12 months from the date of purchase. Any manufacturing defect will be repaired by the company free of charge within the period of warranty subject to the following conditions: 1. This warranty card must be duly filled in, stamped & signed by the dealer. The card and the relevant cash memo must be preserved & produced along with the defective unit. 2. Once the defective unit is repaired during the said warranty period, the warranty shall thereafter continue only for the unexpired period to the original warranty. 3. This warranty is not valid for Damage resulting from accidents, mishandling, negligence, tampering, unauthorized repair, failure to follow instructions, lightning, fire and act of God. Items not purchased from Authorized Dealers of the Company. Batteries (including rechargeable) wherever applicable. Damage to the tamper proof seal. 4. In case of a problem with your unit, please contact Customer Care. In the event that you are advised to send and collect the unit from the Service Center of the Company the same will be done at your expense. 5. While Company or its Authorized Service Dealer will make every effort to carry out repairs under this warranty as soon as possible, it is expressly made clear that the company shall not be held liable for any direct or indirect loss to user due to delay in providing this service. 6. This warranty excludes every condition/warranty/liability not expressly set out therein. 7. Claims, if any to this warranty shall be subject to the courts having jurisdiction in Delhi, India. Product Model No. Serial No. Dealer s Stamp & Signature Customer Care, Shyam Networks (A Division of Vihaan Networks Ltd.) 21-B, Sec-18, Udyog Vihar, Gurgaon Haryana, India customer.care@vnl.in All India Helpline No Ext. 2009, Manufactured by Vihaan Networks Ltd. Gurgaon, Haryana, India SN/QS//06/11/R2