RM24/58 P2P and P2MP Radios

Transcription

1 P2P and P2MP Radios Quick Start Guide Package Contents 1 Mast/Wall Mounting Kit 1 Outdoor Ethernet Cable (Optional) 1 External Antenna (Optional) 1 PoE Injector 1 Quick Start Guide 1 Shyam Transmission System Management Software CD 1 For advanced settings and more detailed information, download the user manual from

2 1. Hardware Overview Antenna Port Power LED LAN Port LAN Port RM-1C-18M RM-1C-18M-E-24 Available Models MODEL DESCRIPTION Point to Point Radio - TDMA (Outdoor) Link RM-1C-18M GHz, 18 Mbps with integrated 19 dbi antenna RM-1C-18M-E GHz, 18 Mbps with external antenna RM-1C-50M GHz, 50 Mbps with integrated 19 dbi antenna RM-1C-50M-E GHz, 50 Mbps with external antenna RM-1C-100M GHz, 100 Mbps with integrated 19 dbi antenna RM-1C-100M-E GHz, 100 Mbps with external antenna RM-1C-18M GHz, 18 Mbps with integrated 23 dbi antenna RM-1C-18M-E GHz, 18 Mbps with external antenna RM-1C-50M GHz, 50 Mbps with integrated 23 dbi antenna RM-1C-50M-E GHz, 50 Mbps with external antenna RM-1C-100M GHz, 100 Mbps with integrated 23 dbi antenna RM-1C-100M-E GHz, 100 Mbps with external antenna 2

3 MODEL DESCRIPTION Point to Multi Point Base Station and Subscribers - TDMA (Outdoor) RPMP-1C-18M-E GHz, 18 Mbps RPMP-1C-18M-E GHz, 18 Mbps RPMP-1C-50M-E GHz, 50 Mbps RPMP-1C-50M-E GHz, 50 Mbps RPMP-1C-100M-E GHz, 100 Mbps RPMP-1C-100M-E GHz, 100 Mbps Interface Description INTERFACE Antennas LAN Port DESCRIPTION Integrated or external antenna depending on the model. One LAN port 10/100/1000 Base-T interface with auto-negotiation. Caution and Warnings Internal settings, adjustment, maintenance, and repairs should be performed only by a skilled technician who is aware of the hazards involved. Do not tightly secure to its mounting brackets until the alignment process of the antenna is complete. Check that there are no direct obstructions or interferences in front of when installing it. Do not stand in front of a connected as it requires clear line-of-sight (LOS). Make sure that both master and slave are assigned different IP addresses before they are installed. 3

4 2. Installing Integrated Antenna 4-Port Switch PoE Adapter Additional Hardware RJ-45 crimp tool (if pre-assembled cable is not used) Grounding cable 13 mm or ½½ socket spanner Ethernet cable - outdoor class, CAT-5e, and 4 twisted pairs Cable ties Computer/laptop running Windows XP/Windows 7 Installation Sequence Mount Ground Connect to PoE Injector Supply Power to PoE Injector Align Master and Slave Mount STEP 1 Assemble unit onto the mast. STEP 2 Connect the ground cable to the chassis point on. STEP 3 Attach cable from to the RJ-45 connector. STEP 4 Secure the cables to the mast or brackets using UV-rated cable ties. STEP 5 Repeat the procedure to mount the other at the slave site. 4

5 Ground STEP 1 Crimp the grounding lug at both the ends on the earthing cable. STEP 2 Connect and tighten one end of the earthing cable to. STEP 3 Connect other end of the earthing cable to the earth pit on the ground. inote: Ensure that ground earthing is separated from power earthing. Connect to PoE Injector STEP 1 Route the cable from into the building where PoE injector is placed. STEP 2 Secure the cable along its path. STEP 3 Connect the cable from to the appropriate RJ-45 connector on the PoE injector. Supply Power to PoE Injector STEP 1 Connect the PoE adapter to the main electrical supply and the power cord plugged into the socket of the adapter. STEP 2 Turn on the power supply. starts receiving power through the PoE adapter. Align Master and Slave STEP 1 Turn on the power supply of the PoE injector at both the sites. STEP 2 Align master in the direction of slave. STEP 3 Turn slave towards master site, listening to the beep sequence until optimal alignment is achieved. inote: Frequent beeps indicate better signal strength. Higher signal strength has lower pause time in between the beeps. Frequency of beep confirms the link quality. The signal strength improves with the increase in the beep frequency. After approximately 40 seconds, the slave beeper starts beeping which indicates a normal operation. Beeper Sequence = On = Off Description Indicates a good signal Indicates a weak signal No air link STEP 4 Tightly secure slave onto the mast/wall. STEP 5 Repeat the same procedure at the master site. Congratulations! The installation of is complete. 5

6 3. Configuring STEP 1 Install the Shyam Transmission System Management software on the system, which on successful installation creates the Shyam Transmission System icon on the desktop. STEP 2 Connect the system to the LAN. STEP 3 Double-click the Shyam Transmission System icon on the desktop or click Start Programs Shyam Transmission System. STEP 4 Enter username and password as admin. STEP 5 Connect either by specifying the IP addresses or enabling the auto-discovery option. On successful connection, the Shyam Transmission System window appears. Please refer to RM-24/58 Installation and Configuration Guide for more details. 6

7 4. Quick Troubleshooting PROBLEM PROBABLE REASON RESOLUTION No beep sound. There is no signal. Ensure that cable at is properly connected. Check the connectivity between the external antenna and. Check master and slave alignment. After setting to factory defaults, check that both master and slave sites have same SSID and pass-phrase for the radio link to work. Beep sound has long pauses in between. The signal is weak. Check master and slave alignment. Check that the alignment beeps give the best signal beeper sequence. 7

8 Warranty This warranty is valid upto 12 months from the date of purchase. Any manufacturing defect will be repaired by the company free of charge within the period of warranty subject to the following conditions: 1. This warranty card must be duly filled in, stamped & signed by the dealer. The card and the relevant cash memo must be preserved & produced along with the defective unit. 2. Once the defective unit is repaired during the said warranty period, the warranty shall thereafter continue only for the unexpired period to the original warranty. 3. This warranty is not valid in case of Damage resulting from accidents, mishandling, negligence, tampering, unauthorized repair, failure to follow instructions, lightning, fire and act of God. Items not purchased from Authorized Dealers of the Company. Batteries (including rechargeable). Damage to the tamper proof seal. Adaptors (wherever applicable), where the Warranty is valid only up to 6 months from the date of purchase of the product. 4. In case of a problem with your unit, please contact Customer Care. In the event that you are advised to send and collect the unit from the Service Center of the Company the same will be done at your expense. 5. While Company or its Authorized Service Dealer will make every effort to carry out repairs under this warranty as soon as possible, it is expressly made clear that the company shall not be held liable for any direct or indirect loss to user due to delay in providing this service. 6. This warranty excludes every condition/warranty/liability not expressly set out therein. 7. Claims, if any to this warranty shall be subject to the courts having jurisdiction in Delhi, India. Product Model No. Serial No. Dealer s Stamp & Signature Customer Care, Shyam Networks (A Division of Vihaan Networks Ltd.) 21-B, Sec-18, Udyog Vihar, Gurgaon Haryana, India customer.care@vnl.in All India Helpline No Ext. 2009, Manufactured by Vihaan Networks Ltd. Gurgaon, Haryana, India SN/QS/RM24,58/06/11/R2.1