Specification For Approval. Product: LED Tri-Proof Light

Transcription

1 Specification For Approval Product: LED Tri-Proof Light Part Number: SE-2T20W-CEX SE-2T30W-CEX SE-4T40W-CEX SE-4T50W-CEX SE-4T60W-CEX SE-5T50W-CEX SE-5T60W-CEX SE-5T70W-CEX Date:

2

3 Features Unique patent design, ERP, and CE certified. Water-proof, Dust-proof, Damp-proof, Pressure-proof. High luminous efficiency LM/W. Maximum 1.8M Long for single product. Excellent heat dissipation support stable quality. Convention installation for linking in series Low light decay, L70=50,000 Hours. High impact test, IK09. Long lifespan 50,000 hours. 5 years warranty. Energy saving up to 80%. Microwave Sensor & Emergency & Emergency function with Sensor System Remark Standard Electronic Co., Limited The below data are obtained by our company under the test of regular environment and conditions, different environment and conditions will lead to different datum. The parameter was marked *, which stands for the data was actually valued in batch by our company and its tolerance is ±5%. S/N Rules: SN:SE XXXXXX XXX EX:SE 2T40W HES 1. Company Brand: SE Length: 2T=600mm,4T=1200mm, 5T=1500mm 3. Power: 20W, 30W,40W,50W,60W,70W 4. Brightness: C=Common Brightness, H=High Brightness 5. Function: D=Dimmable, S=Microwave Sensor, E=Emergency

4 Microwave Sensor Technical Specifications Standard Electronic Co., Limited HF system Transmission power Detection angle Detection angle Time setting Light - con tron Detesting Area Chart 5.8GHz CW radar, ISM Band <0.2mW 360 (Ceiling installation) 1-8m (radii) 10sec. to 30min Lux Standby power Approx. 0.9W Detection range, time setting, light-control can be customization available

5 Battery Parameters Standard Electronic Co., Limited Model NO. Emergency Time (hour) Emergency Brightness (Power) Battery Parameters SE-2T20W-CEX 3 6W (30% Brightness) 7.2V 3600mAH SE-2T30W-CEX 3 10W (30% Brightness) 12V 4400mAH SE-4T40W-CEX 3 13W (30% Brightness) 12V 4000mAH SE-4T50W-CEX 3 16W (30% Brightness) 12V 5000mAH SE-4T60W-CEX 3 20W (30% Brightness) 12V 6000mAH SE-5T50W-CEX 3 16W (30% Brightness) 12V 5000mAH SE-5T60W-CEX 3 20W (30% Brightness) 12V 6000mAH SE-5T70W-CEX 3 23W (30% Brightness) 12V 7000mAH Self Inspection Function: 1 By Monthly: After charge in 48hours continuously, it will start to counting, 30days a cycle, and then turn on in the emergent mode and lighting on 30second for self Inspection; 2 By Yearly: Likewise, 12 months a cycle, it will turn on in the emergent mode and lighting on 30 minutes for self Inspection. Parameter MODEL Power Dimension Luminous LEDSource LED QTY ColorIndex(CRI) PowerFactor Power Efficiency SE-2T20W-CXX 20W L600 * W85 *H74 mm 2000~2200Lm 2835 SMD 120pcs Ra SE-2T30W-CXX 30W L600 * W85 *H74 mm 3000~3300Lm 2835 SMD 180pcs Ra SE-4T40W-CXX 40W L1200 * W85 *H74 mm 4000~4400Lm 2835 SMD 240PCS Ra SE-4T50W-CXX 50W L1200 * W85 *H74 mm 5000~5500Lm 2835 SMD 312PCS Ra SE-4T60W-CXX 60W L1200 * W85 *H74 mm 6000~6600Lm 2835 SMD 360PCS Ra SE-5T50W-CXX 50W L1500 * W85 *H74 mm 5000~5500Lm 2835 SMD 312PCS Ra SE-5T60W-CXX 60W L1500 * W85 *H74 mm 6000~6600Lm 2835 SMD 360PCS Ra SE-5T70W-CXX 70W L1500 * W85 *H74 mm 7000~7700Lm 2835 SMD 420PCS Ra

6 MODEL SE-2T20W-C SE-2T30W-C SE-4T40W-C SE-4T50W-C SE-4T60W-C SE-4T60W-C SE-5T50W- C SE-5T60W-C SE-5T70W-C THD 13% Output Voltage DC36~42V Input Voltage AC100~270V~ 50/60Hz Color Temperatur K K K K Beam Angle 120 Lifespan 30,000~50,000H Working Temp -20~+50 Storage Temp -40~+85 Warranty IP Rate Optical Parameter Luminance Model NO. 1M(Lux) * 2M(Lux) * 3M(Lux) * 4M(Lux) * SE-2T20W-XXX SE-2T30W-XXX Years SE-4T40W-XXX SE-4T50W-XXX SE-4T60W-XXX IP65 SE-5T50W-XXX SE-5T60W-XXX SE-5T70W-XXX

7 Product Line Drawing Model NO. Size A(mm) * Size B(mm) * Size C(mm) * Size D(mm) * SE-2T20W-XXX SE-2T30W-XXX SE-4T40W-XXX SE-4T50W-XXX SE-4T60W-XXX SE-5T50W-XXX SE-5T60W-XXX SE-5T70W-XXX B. Packing Data

8 Model No Pcs/CTN N.W./Pcs (kg) * G.W./CTN (kg) * CTN A SIZE(MM) CTN B SIZE(MM) SE-2T20W-CS *90*80 680*210*280 SE-2T20W-CE *90*80 680*210*280 SE-2T20W-CES *90*80 680*210*280 SE-2T30W-CS *90*80 680*210*280 SE-2T30W-CE *90*80 680*210*280 SE-2T30W-CES *90*80 680*210*280 SE-4T40W-CS *90* *210*280 SE-4T40W-CE *90* *210*280 SE-4T40W-CES *90* *210*280 SE-4T50W-CS *90* *210*280 SE-4FT50W-CE *90* *210*280 SE-4T50W-CES *90* *210*280 SE-4T50W-CS *90* *210*280 SE-4T50W-CE *90* *210*280 SE-4T50W-CES *90* *210*280 SE-5T50W-CS *90* *210*280 SE-5FT50W-CE *90* *210*280 SE-5T50W-CES *90* *210*280 SE-5T60W-CS *90* *210*280 SE-5T60W-CE *90* *210*280 SE-5T60W-CES *90* *210*280 SE-5T70W-CS *90* *210*280 SE-5T70W-CE *90* *210*280 SE-5T70W-CES *90* *210*280

9 Installation Standard Electronic Co., Limited Sequence Model No. Number Quantity 1 LED Tri-proof light 1 2 Metal card buckle SUS Screw 4 4 Well plugs 4

10 Installation Suspended Installation 1 Make a right position and screw hole 2 Screw the steel cable onto the ceiling 3 Hung the fixture under the steel cable and 4 Adjust the position of the fixture and clean itsecure the fixture by steel cable Note: Above installation A belongs to our standard installation, if you want to choose our way of B installations then you need to select our optional accessories and pay. Sequence Number Model NO. Quantity 1 LED Tri-proof light 1 2 Metal card buckle 2 3 The wire SUS Screw 2 5 Wall plugs 2 A.INPUT V THE MAX.WATT IS 600W FOR THE CONNECTION

11 Caution Please read the user manual before installation. Please install, connect and test the lamp according to local regulations, Lamps should always be installed or replaced with care by professional person. Ensure the power is switched off before installation. Please check whether the lamps are broken or not during shipping, broken items cannot be used anymore. Please keep the lamps and accessories away from kids to avoid hurt by mistakes. For protecting eyes, please do not watch the lumen oust surface for a long time. Do not cover anything on lamp and keep lamps away from fire or high temperature objects. Incorrect installation and using, standard keep the right to refuse after-sales service for those disassembled or repaired items. Switch the power off and cool down the lamp before cleaning. The lamp is only suitable for weak acid and weak base environment. Please DO NOT install this product in the following places: a) The place has a large quantity of lampblack and smoke, such as: kitchen and food processing factory etc. b) The place has a large quantity of chemical corrosive substance, such as: chemical plant and stockyard etc. c) The place has poor temperature conditions, large-scale temperature variation, which would easily lead to broken and damage the product, the applicable operating temperature is between -20 and 50 degrees.