DR Accessories. Logos Imaging Accessories. Bipod Mount. Cable Reels

Transcription

1 (866) DR Accessories Logos Imaging provides a full line of Direct Radiography (DR) accessories designed to enhance field operation functionality and user experience when used with any of our flat panel detector systems. The accessory line includes; a bipod stand for panels, a tripod mount for panels, two (2) DR interface options to provide extended wireless range and battery run time, a wireless module to communicate to laptop, additional interface batteries to increase operation time when mains power is not available, cable reels to increase wired operation range, rugged PCs and tablets, protective soft panel covers with accessory pocket, and a wireless X-ray trigger for Golden Engineering sources. Bipod Mount Cable Reels Logos Imaging s bipod stand attaches to the side of any DR panel and provides stability when taking an image in a tight space is a necessity. The design also allows users the opportunity to place the panel on uneven surfaces with no tools required for adjusting or mounting the bipod to the panel. Installation and adjustment takes just seconds. Logos Imaging cable reels provide communication between the panel and PC, while also offering the option to provide power from the carrying case power center to the panel and interface for day-long operation. The reels are available in case-mounted or standing options with cable lengths of 50 m to 150 m (over 50 m only available in standing reel). Bipod Stand Cable Reels ASÝMATOS III Interface MAKRINÓS Wireless X-ray Trigger

2 ASÝRMATOS III Interface Dimensions 6.5 x 2.9 x x 90 x 57 mm The ASÝRMATOS III is Logos Imaging s newest interface. The built-in internal battery provides power to the DR panel enabling communication between the panel and the control PC through a wired connection. The ASÝRMATOS III mounts directly to Golden sources fitted with a Picatinny rail and has a continuous run time of 4.75 hours. Battery Endurance Connectors 3.9 lb (1.8 kg) 285 minutes continuous operation (500+ image acquisitions) 1-2 pin LEMO K Series, Size 1 receptacle 1-7 pin LEMO K Series, Size 1 receptacle 1-10 pin LEMO K Series, Size 2 receptacle 1-16 pin LEMO K Series, Size 2 receptacle MAKRINÓS II Wireless X-ray Trigger Dimensions 2.7 x 1.8 x x 47 x 35 mm 5.2 oz (149 g) Power 5V from Golden Source The MAKRINÓS II wireless X-ray trigger connects to any Golden Engineering X-ray machine fitted with a 5-pin LEMO K Series, Size 1 connector to allow full wireless X-ray control from within the Logos Imaging Application. The module receives power directly from the Golden machine and does not require batteries of its own. Wireless Bluetooth; IEEE , 2.4 GHz; or ISM b/g/n, 2.4 GHz Wireless Approvals FCC, IC, CE, C-TICK, Telec, Anatel (varies by wireless protocol) Connector 5 pin LEMO K Series, Size 1 At 18 mm thin and only 5.3 kg the MÓNOS system can be quickly deployed on target by a single person. Contact Logos Imaging Main Office 6835 Sherman Street, Loveland, CO Shipping 6885 Sherman Street, Loveland, CO Toll Free (866) Office (765) Fax (765) sales@logosimaging.com Web

3 ASÝRMATOS II Interface Dimensions 7.3 x 11.0 x x 279 x 89 mm The ASÝRMATOS II interface provides power to the DR panel and communication between the panel and the control PC through wired or wireless connections. The interface does not have any internal wireless devices, all external wireless devices can be quickly removed, without tools, to assure no wireless signals are being generated. (with external batteries) (w/o external batteries) Connectors 7.7 lb (3.5 kg) 5.4 lb (2.4 kg) 1-2 pin LEMO K Series, Size 1 receptacle 1-7 pin LEMO K Series, Size 1 receptacle 1-10 pin LEMO K Series, Size 2 receptacle 1-16 pin LEMO K Series, Size 2 receptacle 1 - USB A receptacle ASÝRMATOS II External Batteries Nominal Voltage Capacity 14.4 V 6,400 mah (92 Wh) 1.16 lb (0.53 kg) The ASÝRMATOS II external batteries are hot-swappable, allowing for fast battery replacement without losing power to your DR system. Each battery provides an additional system run time of more than three hours (3) on a single charge. The batteries are charged through the charger bay in the carrying case power center. External multi-bay chargers are available as an option. Protection On battery PCB to protect from: Over-charge Over-discharge Over drain Short circuits Battery Endurance 210 minutes continuous operation (500+ image acquisitions) Ambient Temperature Storage: -4 to 122 F, -20 to 50 C Discharge: -4 to 140 F, -20 to 60 C Charge: 50 to 113 F, 10 to 45 C ASÝRMATOS II Interface ASÝRMATOS II Batteries Power Center Wireless Module

4 Power Center Dimensions 7.2 x 4.2 x x 108 x 152 mm Ambient Temperature 3.2 lb (1.4 kg) Storage: -4 to 122 F, -20 to 50 C Discharge: -4 to 140 F, -20 to 60 C Charge: 50 to 113 F, 10 to 45 C The Logos Imaging Power Center has three (3) switches for simultaneous battery charging, computer charging and PoE. Included is a docking station for charging external (hot-swappable) batteries in about two (2) hours, with an additional power port for PC or tablet charging. Power over Ethernet (PoE) enables powering the system off mains power up to 50 m away. The Power Center has full functioning capabilities in or out of the DR system carrying case. Wireless Module The Logos Imaging Wireless Module is a small plug & play battery free wireless module for the ASÝRMATOS II and ASÝ- MATOS III. The Wireless Module allows wireless communication to the laptop. This component is customized to the Logos Imaging systems and provides a wireless range of up to 400 m line of sight. At 18 mm thin and only 5.3 kg the MÓNOS system can be quickly deployed on target by a single person. Dimensions with antenna Dimensions w/o antenna with antenna w/o antenna Wireless Module Antena Frequency Protocol mm mm 13 oz (0.37 kg) 6.8 oz (0.19 kg) TX: 22dBm RX: -74dBM 6dBi 2.4 Ghz B/G/N Contact Logos Imaging Main Office 6835 Sherman Street, Loveland, CO Shipping 6885 Sherman Street, Loveland, CO Toll Free (866) Office (765) Fax (765) sales@logosimaging.com Web

5 B Tripod Mount NEOS III Dimensions 15.5 x 13.0 x x 330 x 19 mm NEOS III 1.2 lb (0.54 kg) Logos Imaging Tripod Mounts are available for the NEOS III, MÓNOS and ORAMA II detectors. These lightweight mounts securely hold the detector, with 1/4-20 standard threads used to connect a tripod, manipulation arm, etc. and include a detachable ASÝRMATOS II mount. The Tripod Mounts are tool free with quick release allowing easy assembly in the field. The Tripods Mounts are compatible with standard tripods* and can be used with panel covers. *Tripod not provided MÓNOS/ORAMA II Dimensions MÓNOS/ORAMA II 19.0 x 16.0 x x 406 x 19 mm 1.6 lb (0.72 kg) Panel Covers Power Line Inspection Rig Logos Imaging has soft panel covers available for the NEOS III, MONÓS and ORAMA II. These covers were designed to enable easy panel insertion, with or without the tripod mount and cooper/tin filters. These soft panel covers provide an extra layer of panel protection with an easy access pocket for mounts and battery. The exterior encoring rings allow for easy mountinbg. These protective covers support both wired and wireless operation. Designed to work on live power lines, Logos Imaging s Power Line Inspection Rig is an effective, non-destructive inspection technique offering immediate, high quality, accurate analysis. The fully contained rig hangs from the powerline with an adjustable distance of 150 mm to 600 mm. Easily deployed by a two-man crew the images are field accessible on a laptop screen. The rig holds either the ORAMA II or MONOS Panel with operation remotely by wireless or by cable operation. Tripod Mount Panel Covers Power Line Inspection Rig