61XM4 Installation Guide 61 Plasma Display Rev 1.3

Transcription

1 Contents: Product Description and Notes Page 1 Ventilation Requirements Page 2 Display Dimensions Front, Top & Bottom Page 3 Rear Page 4 Left & Right Side Page 5 Display Dimensions w/optional Speakers and Stand Page 6 Dimensions w/optional Wall Mount Page 7 Connections Page 8 Control Codes Page 9 Product Description Type: Plasma Display Screen Surface: Anti-Reflective Resolution: 1365x768 Dimensions: (W) x (H) x 4.69 (D) Aspect Ratio: 16:9 Weight: 134.5lbs Color Correction: NEC CCF (Capsulated Color Filter, in panel) FCC: Class B and AccuCrimson (in front filter) Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see Aspect Modes in menus and user manual). Distances are in inches, for millimeters multiply by Distances may vary ±5%. Maximum Tilt Angles Below are the maximum angles that the display can be tilted in both landscape and portrait mode Landscape 30 Portrait 10 Max Tilt PX-61XM4 Page 1 of 10

2 Ventilation Requirements (all models) Dimensions below are minimum required for proper ventilation. NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. PX-61XM4 Page 2 of 10

3 Display dimensions 0.17 FILTER SURFACE (SCREEN AREA) (SCREEN AREA) LED&IR IR Control Buttons AC Inlet Speaker Terminal Power Button PX-61XM4 Page 3 of 10

4 Display dimensions (cont.) 4 - M4 Max 12mm for Speaker M4 Max 10mm for 6 - M8 Mount Max unit 12mm for PC F M4 Max 12mm for Speaker PX-61XM4 Page 4 of 10

5 Display dimensions (cont.) Power Button PX-61XM4 Page 5 of 10

6 Dimensions with optional speakers and stand PX-61XM4 Page 6 of 10

7 Dimensions with optional Wall Mount Kit (61WMK) F PX-61XM4 Page 7 of 10

8 Dimensions with optional Ceiling Mount Kit (61CMK) Note: Optional Accessories not included with 61CMK F PX-61XM4 Page 8 of 10

9 Connections Located at right side of display Power Switch AC inlet Ext. Speaker Connections Control Panel PX-61XM4 Page 9 of 10

10 Control Codes Function Code Data POWER ON 9FH 80H 60H 4EH 00H CDH OFF 9FH 80H 60H 4FH 00H CEH INPUT SWITCH VIDEO1 (BNC) DFH 80H 60H 47H 01H 01H 08H VIDEO2 (RCA) DFH 80H 60H 47H 01H 02H 09H VIDEO2 (S-Video) DFH 80H 60H 47H 01H 03H 0AH DVD1/HD1(RCA/Component) DFH 80H 60H 47H 01H 05H 0CH DVD2/HD2 (5BNC/Component) DFH 80H 60H 47H 01H 06H 0DH RGB1 (15pin HD) DFH 80H 60H 47H 01H 07H 0EH RGB2 (5BNC/RGB) DFH 80H 60H 47H 01H 08H 1FH RGB3 (DVI) DFH 80H 60H 47H 01H 0CH 13H AUDIO MUTE ON 9FH 80H 60H 3EH 00H BDH OFF 9FH 80H 60H 3FH 00H BEH PICTURE MODE NORMAL DFH 80H 60H 0AH 01H 01H CBH THEAT.1 DFH 80H 60H 0AH 01H 02H CCH THEAT.2 DFH 80H 60H 0AH 01H 03H CDH DEFAULT DFH 80H 60H 0AH 01H 04H CEH BRIGHT DFH 80H 60H 0AH 01H 05H CFH SCREEN MODE: STADIUM DFH 80H 60H 51H 01H 02H 13H ZOOM DFH 80H 60H 51H 01H 03H 14H NORMAL DFH 80H 60H 51H 01H 04H 15H FULL DFH 80H 60H 51H 01H 05H 16H 2.35:1 DFH 80H 60H 51H 01H 0AH 1BH AUTO PICTURE ON DFH 80H 60H 7FH 03H 03H 09H 00H 4DH OFF DFH 80H 60H 7FH 03H 03H 09H 01H 4EH CINEMA MODE ON DFH 80H 60H C1H 01H 01H 82H OFF DFH 80H 60H C1H 01H 02H 83H NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Parity: Odd Communication: Asynchronous Stop Bit: 1 bit Baud Rate: 9600 bps Communication Code: Hex Data Length: 8 bits PC Control Connector (D-Sub 9P) NOTE: If so Desired, jumper Request to send and Clear to Send together on both ends of the cable to simplify cable connection. These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND). PX-61XM4 Page 10 of 10