Specification. Chassis Specifications. Catalyst 9407R Switch Chassis Specifications

Transcription

1 Chassis Chassis, on page 1 Power Supply, on page 4 Chassis and Module Power and Heat Values, on page 8, on page 9 Catalyst 9407R Switch Chassis Table 1: Physical of the Chassis Dimensions (H x W x D) Rack units (RU 1 ) x x inches (44.22 x x cms) 10 RU Chassis with fan tray 63.0 lb (28.58 kg) 1 The chassis height is measured in rack units (RU or just U), where 1 RU or 1 U equals 1.75 in (44.45 mm). Table 2: Environmental of the Chassis Ambient temperature and altitude for normal operations 2 Ambient temperature and altitude for shortterm 3 exceptional conditions 23 to 113 F (5 to +45ºC), up to 6,000 feet (1800 m) 23 to 104 F (5 to +40ºC), up to 10,000 feet (3000 m) 23 to 131 F (5 to +55ºC), up to 6,000 feet (1800 m) 23 to 122 F (5 to +50ºC), up to 10,000 feet (3000 m) Nonoperating and storage: 40 to 167 F (40 to 75 C) 1

2 Catalyst 9407R Switch Chassis Nonoperating and storage temperature Thermal transition Humidity (RH), ambient (noncondensing) Altitude (operating and nonoperating) 40 to 167 F (40 to 75 C) Hot to cold at a maximum rate of 86 F (30 C) per hour Cold to hot at maximum rate of F (96 C) per hour Operating, nonoperating and storage 10 to 95 percent 60 to 3000m Sound pressure level (LpAD) and sound power level (LwAD) LpAD 58 dba LwAD no greater than 7.7 Bels This is with eight power supply modules installed and delivering 50 percent of rated output power; measured according to International Organization for Standardization (ISO) 7779 and declared according to ISO 9296 Airflow Shock Sine Vibration Chassis Right to left (when facing the front of the chassis) Power supply Front to back Operating 5G 11ms (Halfsine) Nonoperating and storage 15G 11ms (Halfsine) Operating 0.15G (10Hz500Hz) Nonoperating and storage 0.8G (10Hz500Hz) Random Vibration (Operating) Spectral Break Point Frequencies Acceleration Spectral Density Slope Hz 6 db /octave Hz 0.1 [(m/s²)²]/hz (0.001 g²/hz) Hz 24 db /octave Random Vibration (Nonoperating and Storage) Spectral Break Point Frequencies Hz Acceleration Spectral Density Slope 6 db /octave Hz 1.0 [(m/s²)²]/hz* (0.01 g²/hz) Hz 24 db /octave 2 Minimum ambient temperature for cold startup is 0ºC 2

3 Catalyst 9410R Switch Chassis 3 Shortterm exceptional conditions are for no longer than a oneyear period of 96 consecutive hours, or 360 hours total, or 15 occurrences. Catalyst 9410R Switch Chassis Table 3: Physical of the Chassis Dimensions (H x W x D) Rack units (RU 4 ) x x in. (57.43 x x cm) 13 RU Chassis with fan tray 65.0 lb (29.48 kg) 4 The chassis height is measured in rack units (RU or just U), where 1 RU or 1 U equals 1.75 in (44.45 mm). Table 4: Environmental of the Chassis Ambient temperature and altitude for normal operations 5 Ambient temperature and altitude for shortterm conditions 6 exceptional conditions 23 to 113 F (5 to +45ºC), up to 6,000 feet (1800 m) 23 to 104 F (5 to +40ºC), up to 10,000 feet (3000 m) 23 to 131 F (5 to +55ºC), up to 6,000 feet (1800 m) 23 to 122 F (5 to +50ºC), up to 10,000 feet (3000 m) Nonoperating storage Thermal transition and 40 to 167 F (40 to 75 C) Hot to cold at a maximum rate of 86 F (30 C) per hour Cold to hot at maximum rate of F (96 C) per hour Humidity (RH), ambient (noncondensing) Altitude (operating and nonoperating) Operating, nonoperating and storage 10 to 95 percent 60 to 3000m Sound pressure level (LpAD) and sound power level (LwAD) LpAD 60 dba. LwAD no greater than 7.8 Bels This is with eight power supply modules installed and delivering 50 percent of rated output power; measured according to International Organization for Standardization (ISO) 7779 and declared according to ISO 9296 Airflow Chassis Right to left (when facing the front of the chassis) Power supply Front to back 3

4 Power Supply Shock Sine Vibration Operating 5G 11ms (Halfsine) Nonoperating and storage 15G 11ms (Halfsine) Operating 0.15G (10Hz500Hz) Nonoperating and storage 0.8G (10Hz500Hz) Random (Operating) Vibration Spectral Break Point Frequencies Acceleration Density Spectral Slope Hz 6 db /octave Hz 0.1 [(m/s²)²]/hz (0.001 g²/hz) Hz 24 db /octave Random Vibration (Nonoperating and Storage) Spectral Break Point Frequencies Hz Acceleration Density Spectral Slope 6 db /octave Hz 1.0 [(m/s²)²]/hz* (0.01 g²/hz) Hz 24 db /octave 5 Minimum ambient temperature for cold startup is 0ºC 6 Shortterm exceptional conditions are for no longer than a oneyear period of 96 consecutive hours, or 360 hours total, or 15 occurrences. Power Supply 3200W ACInput Power Supply 3200 W ACInput Power Supply The following table lists specifications for the 3200 W AC input power supply: 4

5 3200 W ACInput Power Supply Table 5: 3200 W ACInput Power Supply ACinput type ACinput voltage ACinput current ACinput frequency Branch circuit requirement Description Wideranging input with power factor correction. Note Power factor correction is a standard feature on ACinput power supplies. Power factor correction reduces the reactive component in the source AC current, allowing higher power factors (0.90 minimum at loads equal to or greater than 20 percent of maximum loads, and 0.95 minimum at 3200W maximum loads, at 115/230 VAC nominal AC input voltages) and lower harmonic current components. Lowline (115 VAC nominal) 85 VAC (min) to 132 VAC (max) Highline (230 VAC nominal) 180 VAC (min) to 264 VAC (max) 17.6 A at 100 VAC (1570 W output) 17.6 A at 200 VAC (3200 W output) 50/60Hz nominal (47 to 63Hz full range) Each chassis power supply should have its own dedicated, fusedbranch circuit: North America 20 A. International Circuits sized to local and national codes. All AC power supply inputs are fully isolated. Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B. For highline operation, the power supply operates with the line conductor wired to an source AC phase, and the Neutral conductor wired either to a Neutral, singlephase power system, or to another source AC phase as long as the net input voltage is in the range of 180 to 264 VAC. Power supply output capacity Power supply output For 55 VDC output 1560 W at 115 VAC; 3190 W at 230 VAC For 3.3VDC output 10 W at 115 VAC; 10 W at 230 VAC 100 to 120 VAC operation 3.3 V V 200 to 240 VAC operation 3.3 V 58 55V Output holdup time 20 ms minimum. 5

6 3200 W Power Supply AC Power Cords kva rating 7 Heat dissipation (in British Thermal Units (BTU)) Description 3200W (total output power ) or kva (highline operation). For 3200W BTU per hour For 1570W BTU per hour 5.0 lb (2.3 kg) 3200 W Power Supply AC Power Cords 7 The kva rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard circuits and transformers to power a switch The following table lists the specifications for the AC power cords that are available for the 3000 W ACinput power supply. The table also includes references to power cord illustrations. Note All 3200 W power supply power cord: Lengths range from feet ( meters); with most cord lengths between 13 and 14 feet (4.013 and meters) Have an IEC60320/C19 appliance connector at one end. Figure 1: IEC60320/C19 Appliance Connector Table 6: 3200 W Power Supply AC Power Cords Locale Part Number Cordset Rating AC Source Plug Type Argentina CABI309C19INTL Figure 2: CABI309C19INTL= (Argentina) Australia CABAC16AAUS Figure 3: CABAC16AAUS= (Australia) 6

7 3200 W Power Supply AC Power Cords Locale Part Number Cordset Rating AC Source Plug Type China CAB9K16ACH Figure 4: CAB9K16ACH= (China) Europe CABCEE77C19EU Figure 5: CABCEE77C19EU= and CABI309C19INTL= (Europe) CABI309C19INTL India CABSABSC19IND Figure 6: CABSABSC19IND= (India) International CABI309C19INTL Figure 7: CABI309C19INTL= (International) Israel CABS132C19ISRL Figure 8: CABS132C19ISRL= (Israel) Italy CABC2316C19IT Figure 9: CABC2316C19IT= (Italy) Japan, North America (Nonlocking Plug) 200 to 240 VAC Operation CABUS620PC19US Figure 10: CABUS620PC19US= (Japan, North America Nonlocking) 7

8 Chassis and Module Power and Heat Values Locale Part Number Cordset Rating AC Source Plug Type Japan, North America (Locking Plug) 200 to 240 VAC Operation CABL620PC19US Figure 11: CABL620PC19US= ( Japan, North America Locking ) North America CABUS520C19US 20 A, 125 VAC Figure 12: CABUS520C19US= (North America) South Africa CABI309C19INTL Figure 13: CABI309C19INTL= (South Africa) UPS 220V CABC19CBN Figure 14: Chassis and Module Power and Heat Values The following tables provide the power and heat dissipation data. Unless otherwise noted, the information in the tables is measured under fully loaded conditions (transceivers installed). Note DC output power is the output from the power supply (internal to the system). The ACinput power is the input from the outlet to the power supply. The percentage difference between the two values is the efficiency of the power supply. Table 7: Power Requirements and Heat Dissapation Fan Tray PID ACInput Power in Allocated) DCOutput in Requested) 90V 120V 180V 240V Heat Diss. in BTU / hr. C9407FAN C9410FAN

9 Table 8: Power Requirements and Heat Dissapation Supervisor Module PID ACInput Power in Allocated) DCOutput in Requested) 90V 120V 180V 240V Heat Diss. in BTU / hr. C9400SUP C9400SUP1XL Table 9: Power Requirements and Heat Dissipation Switching Modules PID ACInput Power in Allocated) DCOutput in Requested) 90V 120V 180V 240V Heat Diss. in BTU / hr. C9400LC48T C9400LC48U C9400LC24XS C9400LC48UX C9400LC48S C9400LC24S C9400LC48P The total weight of a fully configured chassis will depend on the type of chassis, the number of modules, and power supplies installed. Use the corresponding weights in the tables below to arrive at the total chassis weight for your hardware configuration. Chassis s PID (add = for spare) C9404R C9407R C9410R (Chassis with Fan Tray) 39.0 lbs (17.4kg) 63.0 lb (28.58 kg) 65.0 lb (29.48 kg) 9

10 Supervisor Module s PID (add = for spare) C9400SUP1 C9400SUP1XL 9.9 lb (4.5 kg) 9.9 lb (4.5 kg) Switching Module s PID (add = for spare) C9400LC48T C9400LC48U C9400LC48UX C9400LC24XS C9400LC24S C9400LC48S C9400LC48P 6.2 lb (2.82 kg) 6.7 lb (3.0 kg) 8.3 lb (3.8 kg) 6.9 lb (3.1 kg) 5.5lb (2.49 kg) 6.5lb (2.94 kg) 6.6 lb (3.0 kg) Power Supply Module s PID (add = for spare) C9400PWR3200AC 5.0 lb (2.3 kg) Blank Covers PID (add = for spare) C9400SBLANK (Cisco Catalyst 9400 Series Slot Blank Cover) C9400PWRBLANK (Cisco Catalyst 9400 Series Power Supply Blank Cover) 3.4 lb (1.54 kg) 0.14 lb (0.06 kg) 10