NORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHATRONIC ENGINEERING
|
|
- Colleen Berry
- 5 years ago
- Views:
Transcription
1 NORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHATRONIC ENGINEERING
2 TERHAD NORMA PERALATAN PROGRAM NAMA JABATAN : BENGKEL WELDING 1 GAS WELDING SET 2 POWER SHEAR CUTTING MACHINE 3 HAND SHEARING TOOL 4 POWER SAW AC/DC ARC WELDING SET DJM ELECTROD OVEN 7 CIRCULAR DISC CUTTING MACHINE 8 BENCH GRINDING MACHINE ANVIL /13 TERHAD
3 : BENGKEL FITTING 1 HEAVY DUTY BENCH VICE DRILL MACHINE BENCH DRILLING MACHINE 4 HEAVY DUTY BENCH VICE BENCH GRINDING MACHINE VERNIER HEIGHT GAUGE 7 ANVIL 8 TAP AND DIE SURFACE TABLE 10 SURFACE PLATE 11 SURFACE GAUGE 12 ANGLE PLATE 13 L SQUARE DJM 1012
4 PROGRAM : DIPLOMA KEJURUTERAAN MEKATRONIK /NAMA KURSUS : DJM1012/MECHATRONIC WORKSHOP PRACTICE 1 NAMA RUANG ALAT PELAJAR (MAKMAL/ BENGKEL) 1 SURFACE GAUGE CENTRE LATHE MACHINE 3 POWER SAW 4 BENCH DRILLING MACHINE BENCH GRINDING MACHINE SURFACE TABLE BENGKEL MACHINING 7 SURFACE PLATE 8 SURFACE GAUGE 9 VERNIER HEIGHT GAUGE 10 HEAVY DUTY BENCH VICE
5 : BENGKEL MICHINING 1 SURFACE GAUGE CENTRE LATHE MACHINE 3 POWER SAW 4 BENCH DRILLING MACHINE BENCH GRINDING MACHINE SURFACE TABLE 7 SURFACE PLATE 8 SURFACE GAUGE 9 VERNIER HEIGHT GAUGE 10 HEAVY DUTY BENCH VICE DJM 1012
6 : BENGKEL CADCAM 1 CNC LATHE MACHINE TRAINER SET WITH TOOLS (EDUCATION CNC DRILLING/MILLING MACHINE SET WITH TOOLS (EDUCATION ELECTRIC DISCHARGE MACHINE SET WITH TOOLS (EDM WIRE ELECTRICAL DISCHARGE MACHINE SET WITH TOOLS (EDM DIE S CADCAM SOFTWARE DJM 2012
7 : BILIK LUKISAN 1 DRAWING TABLE DRAWING CHAIR MECHANICAL DRAWING SET (LECTURER) DJJ 1012
8 : BENGKEL CAD 1 C++ SOFTWARE COMPUTER SETS INCLUDE COMPUTER TABLE AUTODESK AUTOCAD SOFTWARE DESKTOP COMPUTER COMPUTER TABLE COMPUTER CHAIR DESKTOP COMPUTER SERVER (LECTURER) COMPUTER TABLE (LECTURER) COMPUTER CHAIR (LECTURER) PLOTTER COLOUR LASER PRINTER A LCD PROJECTOR LCD SCREEN DJM 1022 DJJ2062
9 : BENGKEL MEKATRONIK 1 ELECTRONICS TRAINING SYSTEMS KITS SET 2 DIGITAL MULTIMETER (COMPLETE WITH 10A AMMETER) 3 DUAL CHANNEL OSCILLOSCOPE 4 DIGITAL LOGIC TRAINER SET 5 DC POWER SUPPLY 6 REGULATED DIGITAL DC POWER SUPPLY 7 VENTURI METER EQUIPMENT SET 8 BERNOULLI SET 9 HEAT TRANSFER THROUGH COMPOSITES WALLS EQUIPMENT MINI STEAM BOILER ELECTRONICS TRAINING SYSTEMS MODEL: EFT-ETS 12 DIGITAL MULTIMETER (COMPLETE WITH 10A AMMETER) 13 FUNCTION GENERATOR 14 REGULATED DIGITAL DC POWER SUPPLY (D) 15 SENSOR AND TRANSDUCER TRAINING KITS 16 DIGITAL LOGIC TRAINER SET 17 DIGITAL MULTIMETER (COMPLETE WITH 10A AMMETER) 18 REGULATED DIGITAL DC POWER SUPPLY (D) 19 PLC PNEUMATIC TRAINING KIT PLC SIMULATOR SOFTWARE 21 PROCESS CONTROL SYSTEM (PID CONTROLLER) (EDUCATION 22 PERSONAL COMPUTER FOR PID CONTROLLER INTERFACE 23 MATLAB SOFTWARE 24 POWER ELECTRONIC TRAINERS SET (EDUCATION SET) 25 ELECTRICAL DRIVES TRAINERS SET (EDUCATION SET) 26 ELECTRICAL DRIVES TRAINERS SET (AC DRIVES TRAINERS) 27 STEPPER MOTOR TRAINING KIT BRUSHLESS DC MOTOR TRAINING KIT LEGO EDUCATION KIT VARIOUS TYPES OF SENSOR(E.G PROXIMITY, RANGE,TACTILE) 31 ARTICULATED ROBOT ROBOTIC SIMULATION SOFTWARE 33 CIM SIMULATION SOFTWARE 34 CARTESIAN ROBOT 35 PC-BASED MICROCONTROLLER TRAINING SYSTEM SET 36 DIGITAL DC POWER SUPPLY 37 ARDUINO SET WITH PIC LINE FOLLOWER ROBOT SET 39 PORTABLE AC/DC POWER SUPPLY MULTI TESTER AMMETER AC/DC 42 VOLTMETER AC/DC 43 POWER FACTOR METER 44 WATTMETER DJM 2032 DJM 2043 DJM 3052 DJM 3063 DJM5092 DJM 5103 DJM 6113 DJM 6132 DJJ2022
10 : BENGKEL ELECTRICAL TECHNOLOGY 1 PORTABLE AC/DC POWER SUPPLY MULTI TESTER AMMETER AC/DC 4 VOLTMETER AC/DC 5 POWER FACTOR METER 6 WATTMETER DJJ 2022
11 : STRENGTH OF MATERIALS & MECHANICS OF MACHINES LABORATORY 1 EQUILIBRIUM FORCE APPARATUS SET 2 STRUCTURE APPARATUS SET 3 KINEMATICS OF PARTICLES TESTING MACHINE SET 4 KINETICS OF PARTICLES MACHINE SET 5 UNIVERSAL TESTING MACHINE SET 6 BEAM DEFORMATION MACHINE SET TORSION MACHINE SET DJJ 3053 DJJ 3103 `
12 : PNEUMATICS & HYDRAULICS LABORATORY 1 EQUILIBRIUM FORCE APPARATUS SET 2 STRUCTURE APPARATUS SET 3 KINEMATICS OF PARTICLES TESTING MACHINE SET 4 KINETICS OF PARTICLES MACHINE SET DJJ 3053
13 : PROJECT WORKSHOP 1 CAE ANALYSIS SOFTWARE SET 2 DESKTOP COMPUTER WORKSTATION 3 PRINTER COMPUTER TABLE 5 COMPUTER CHAIR 6 PORTABLE HAND GRINDER 7 PORTABLE HAND DRILL 8 MIG WELDING SET 9 BENCH DRILLING MACHINE PEDESTAL GRINDING MACHINE CUT-OFF CUTTING MACHINE BENCH VISE 13 WORK BENCH DJJ 6143
NORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHANICAL ENGINEERING (MANUFACTURING)
NORMA PERALATAN PROGRAM PENGAJIAN POLITEKNIK DIPLOMA IN MECHANICAL ENGINEERING (MANUFACTURING) : THERMODYNAMICS PERFECT GAS APPARATUS 40 2 2 PROPERTIES OF PURE SUBTANCES APPARATUS 40 2 3 FIRST LAW THERMODYNAMIC
More informationFaculty of Mechanical Engineering B.E. Mechanical and Automation Engineering (R 2013) Semester III CE6461 Fluid Mechanics and Machinery Laboratory - I
(R 203) Semester III CE646 Fluid Mechanics and Machinery Laboratory - I. Orifice meter setup 2. Venturi meter setup 3. Rotameter setup 4. Pipe Flow analysis setup 5. Centrifugal pump/submergible pump setup
More informationASSOCIATED ELECTRONICS RESEARCH FOUNDATION C-53 PHASE-II, NOIDA
ASSOCIATED ELECTRONICS RESEARCH FOUNDATION C-53 PHASE-II, NOIDA SIX-MONTHS TRAINING PROGRAMME ON EMBEDDED SYSTEM, VLSI MAT LAB AND PCB DESIGN: Course syllabus: Theory: Introduction to C programming. More
More informationLIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG
LIST OF MACHINES/EQUIPMENT/ACCESSORIES/INSTRUMENTS TOOLS/AIDS WITH BROAD SPECIFICATIONS & ESTIMATED COST FOR MINI TOOL ROOM - VIZAG I. LIST OF ESSENTIAL MACHINES/EQUIPMENT WITH SUGGESTED QUANTITIES (Rs.
More informationMECHATRONIC LAB ROOM NO: 4201, MECHANICAL DEPARTMENT INTERCOM: 418. INCHARGE: Mr. M. MOHANDASS, Associate Professor, Mechanical
MECHATRONIC LAB ROOM NO: 4201, MECHANICAL DEPARTMENT INTERCOM: 418 INCHARGE: Mr. M. MOHANDASS, Associate Professor, Mechanical ASSOCIATE INCHARGE: K. KARTHEE, Assistant Professor, Mechanical SUPPORTING
More informationDynamics and Vibrations (3C, 3H) Equilibrium of rigid bodies and Newton s second low, rotational motion, kinematics of rigid bodies, kinetics
Course Description: 610211 Electrical Circuits (1) (3C, 3H) Definitions and Units. Basic Concepts (Charge, Current, Voltage, Power Energy). Circuit Elements (Independent and Dependent Voltage and Current
More informationDEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING
DEPARTMENT OF ELECTRONICS AND INSTRUMENTATION ENGINEERING B.E. ELECTRONICS & INSTRUMENTATION-V SEMESTER REQUIREMENT FOR A BATCH OF 30 STUDENTS 10144EC509 MICROPROCESSOR AND MICROCONTROLLER LAB S.No. Description
More informationQuantity required (R) Quantity available (A) Deficiency (R - A) Sl. No. Description of Equipment. 1. BC 107, BC 148,2N2646,BFW10 (each) 25
Faculty of Information and Communication Engineering (R 2013) Semester II EC6211 Circuits and Devices Laboratory 1. BC 107, BC 148,2N2646,BFW10 (each) 2 2. 1N4007, Zener diodes (each) 2 3. Resistors, Capacitors,
More informationMEB COMPUTER INTEGRATED MANUFACTURING. Unit - I Part - A
MEB - 620 - COMPUTER INTEGRATED MANUFACTURING One Mark Questions: Unit - I 1. What is meant by CIM? 2. Define: CAD 3. What are the different types of CAD system? 4. What is meant by graphic workstation?
More informationMIT DIPLOMA IN COMPUTER INTEGRATED MANUFACTURE (LEVEL 5) MN COURSE INFORMATION
CNC Programming Course Code: 22910 To develop CNC programming procedures for machining centres and turning centres. Anyone with an interest in the programming of CNC machinery or in the CAD/CAM industry.
More informationI Year B.E./ B.Tech. Semester I ME108 Engineering Practices Laboratory. Requirements for a batch of 30 students. Quantity required.
I Year B.E./ B.Tech. Semester I 10122ME108 Engineering Practices Laboratory Requirements for a batch of 30 students Sl.No. Description of Equipment Deficiency % CIVIL 1. Assorted components for plumbing
More informationMECHATRONICS CATALOGUE
2008 MECHATRONICS CATALOGUE 2 3 Mechatronics - Micro PLC training systems Mechatronics - Compact pneumatic press You can use the module with task board and task cards......with a traffic light module..
More informationPlease get updated file if feel any issue at any point call any PRODUCT DETAILS
TAP MASTER To : dhandaexporters@gmail.com Subject : Tapping Machine From : tapmaster.in@gmail.com Message Please get updated file if feel any issue at any point call any time @ 9813363001 PRODUCT DETAILS
More informationINVITATION FOR QUOTATION. TEQIP-III/2018/nitm/Shopping/6
INVITATION FOR QUOTATION TEQIP-III/2018/nitm/Shopping/6 08-Jan-2018 To,......... Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation
More informationT.S.SRINIVASAN CENTRE FOR POLYTECHNIC COLLEGE AND ADVANCED TRAINING
DEPARTMENT OF MECHATRONICS ENGINEERING CPAT ADDITIONAL S SYLLABUS THIRD SEMESTER Subject Code Subject Hours per week SP3.1 Basic Electronic Soldering 2 SP3.2 Welding 2 FOURTH SEMESTER Subject Code Subject
More informationMaintenance & Reliability elearning Training Curriculum
Electrical MAINTENANCE AC/DC Theory AC/DC Theory: Current AC/DC Theory: Voltage AC/DC Theory: Resistance AC/DC Theory: Ohm's Law AC/DC Theory: Magnetism AC/DC Theory: Electrical Measurements AC/DC Theory:
More informationGLOBAL ACADEMY OF TECHNOLOGY DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING LABORATORY INFRASTRUCTURE DETAILS
LABORATORY INFRASTRUCTURE DETAILS S. No. Name of the 1 Basic Electrical Engineering 2 Electrical Machines - 1 3 Electronics 4 Microcontroller 5 Power Electronics 6 Relay and High Voltage Name of the important
More informationTable of Contents. Lucas Nülle GmbH Page 1/9
Table of Contents Table of Contents Automation / Industry 4.0 IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain IMS 10 Buffering 1 2 2 4 5 Lucas Nülle GmbH Page 1/9 www.lucas-nuelle.us
More informationFABRICATED PRODUCT RANGE
FABRICATED PRODUCT RANGE Mobile: +27(0)82 556 0793 Tel / Fax +27(0)11 472 0460 E-Mail: info@kraftig.co.za Website : www.kraftig.co.za Johannesburg / South Africa MOBILE LIFTING GANTRY Chain block and crawler
More informationGITAM. Skill Development Centre. Computer Aided Engineering UNIVERSITY H Y D E R A B A D. (Estd.u/s 3 of the UGC, 1956)
GITAM Skill Development Centre Computer Aided Engineering A University Committed to Excellence Modeling and Analysis Software tools Creo (Pro/ENGINEER) : Creo is a powerful 3D CAD solutions package optimized
More informationManufacturing PROGRAMS STUDY
PROGRAMS STUDY of Computer Numeric Control Machining 724 Basic Certificate (B.C.) 19 Credit Hours (CH) 15 CH 123 CNC Milling Operations & Programming 3 137 CNC Turning Operations & Programming 3 19 CH
More informationNATIONAL CERTIFICATE in 1 of 14
NATIONAL CERTIFICATE in 1 of 14 level of qualification: 4 credit total: 302 Compulsory Elective A Elective B level 1 credits: 9 0-6 0-20 level 2 credits: 69 0-85 0-20 level 3 credits: 32 0-137 0-20 level
More informationMetropolitan Community College
B53 Academic Affairs 11100 CULINARY ARTS $152,465 261392 Chair & Table 34 $44,200 261393 Silverware & Dinnerware 1 261394 Emersion Circulator 3 261395 Food Storage 65 $2,925 261396 Freezer Storage Cabinet
More informationCalibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
More informationStrongman Metal Tools Price list July 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list July 2018 PLEASE NOTE PRICES
More informationPROCUREMENT UNDER TEQIP-II
PROCUREMENT UNDER TEQIP-II As Per PMSS,TEQIP-II Procurement Particulars Sr.No. Package Title As per PMSS Expenditure in Rs. Actual Expenditure in Rs. 1 Workshop Roof Covering 373,592.00 371,837.00 2 "S"
More informationCOMPUTER AIDED DESIGN AND MANUFACTURING OF PIPELINE ENERGETICS SYSTEMS COMPONENTS
COMPUTER AIDED DESIGN AND MANUFACTURING OF PIPELINE ENERGETICS SYSTEMS COMPONENTS Assoc. Prof. Ing. Slavko Pavlenko, PhD. Faculty of Manufacturing Technologies University of Technology in Kosice with a
More informationCIM CIM. db-tech TRAINING OBJECTIVE: Students are expected to be knowledgeable in COMPUTER INTEGRATED MANUFACTURING
Computer Integrated Manufacturing Our CIM systems are modular flexible solutions for educating training students in the principles technologies of computer integrated manufacturing. CIM TRAINING OBJECTIVE:
More informationMachining and Quality Technician- ASC/Q3509 (Automotive)
- () 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience,
More informationTB6600 Stepper Motor Driver
TB6600 Stepper Motor Driver V1.0 07 2018 Open Source Mechatronics LTD 2018 Safety Statement The author of this document is not liable or responsible for any accidents, injuries, equipment damage, property
More informationFinalised the CE conformity procedures and had its machines CE marked. MVD produced its first machine.
1950 1971 1974 1981 1994 2001 2003 2011 MVD produced its first machine. The first sheet metal working machine perforation press was presented to the market. The production of Heavy-duty Press Brakes and
More informationSBT SERIES. Swing Beam Touch Shear
SBT SERIES Swing Beam Touch Shear World s heaviest and most robust swing beam shear construction Proven reliable design frame with rigid swing style upper beam Optimized cutting angle for minimized distortion
More informationMANUFACTURING ELECTRICAL AND PLC PANEL BOARD
Profile No.: 1 NIC Code: 27104 MANUFACTURING ELECTRICAL AND PLC PANEL BOARD 1. INTRODUCTION: Simplification of engineering and precise control of manufacturing process can result in significant cost savings.
More informationPOLO MECCATRONICA WHERE THE SMART FACTORY GROWS
IMPRESA INNOVAZIONE MARKETING TERRITORIALE Polo POLO MECCATRONICA WHERE THE SMART FACTORY GROWS www.polomeccatronica.it PROJECT Polo Polo Meccatronica is a project promoted by the Autonomous Province of
More informationPEN PLOTTER. OF TECHNOLOGY, Maharashtra, INDIA. OF TECHNOLOGY, Maharashtra, INDIA ABSTRACT
PEN PLOTTER Prof. L.P.Bhamare 1, Safi Vijaykumar vinay 2, Tajanpure Gayatri Anil 3, Sagar Dattatray Bairagi 4 1 Prof. L.P.Bhamare,Assistant Professor, Electronics & Telecommunication, SIR VISVESVARYA INSTITUTE
More informationCALENDAR OF TRAINING PROGRAMMES FOR THE YEAR
CALENDAR OF TRAINING PROGRAMMES FOR THE YEAR 2017-18 Course Code Title of Programme Course Dates of Commenceme nt Duration Timings Intake Capacity Eligibility criteria Fee per participant Contents in brief
More informationYOUR POWER PARTNER REV1.0/12
YOUR POWER PARTNER REV1.0/12 - We offer and cover a very wide range of power conversion products from 0.25W to 400kVA, from Standard needs to High-Rel Custom products. - Each of our partners is specialized
More informationXL-80 spares list. Application note. Overview
XL-80 spares list Overview This application note lists the system components for the XL-80 laser system. To order please contact your local Renishaw office at www.renishaw.com/contact Description XL-80
More informationWork Experience Form CNC Machinist
2003 - Provincial Occupational Analysis (POA) Work Experience Form CNC Machinist 1-877-978-7233 www.manitoba.ca/tradecareers Personal Information (please print) Legal First Name Middle Initial Legal Last
More informationCoil Fed Laser Blanking Systems
IRON S.R.L Asservimenti Automatici ed Automazioni +39 0438 492390 Fax +39 0438 492 363 email: ironinfo@iron.it website: http://www.iron.it page: 1/50 IRON S.R.L Asservimenti Automatici ed Automazioni +39
More informationIndustrial Technologies
Industrial Technologies Computer Aided Drafting Credential: Associate in Applied Science Degree in Computer-Aided Drafting A50150 The Computer Aided Drafting curriculum prepares graduates for employment
More informationPlastic Injection Mold, Mould Repair, Jig & Fixture High Precision Spare Part, Insert Mold.
Plastic Injection Mold, Mould Repair, Jig & Fixture High Precision Spare Part, Insert Mold www.ars-seimitsu.com Company Profile Company Name : A.R.S. SEIMITSU CO., LTD Address : 158 Moo 2 T. Bankoh Sub-District
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
More informationBCHS Curriculum Map Autumn 1. Department Design and Technology Year 13 Qualification L3 Engineering Unit 16. Term. Topic.
Department Design and Technology Year 13 Qualification L3 Engineering Unit 16 BCHS Curriculum Map 2016-2017 Term Autumn 1 1 criteria P1. criteria P2. criteria P3. Autumn 2.11.15 9.11.15 16.11.15 23.11.15
More informationNorthcentral Technical College Engineering Technology Articulation
Northcentral Technical College Engineering Technology Articulation Articulation Agreement Proposal for Engineering Technology Associate s Degree programs at Northcentral Technical College and the BS programs
More informationCUSTOMIZED TEACHER ASSESSMENT BLUEPRINT. Test Code: 5936 Version: 01
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT ELECTROMECHANICAL ENGINEERING TECHNOLOGY PA Test Code: 5936 Version: 01 Specific competencies and skills tested in this assessment: Technical Documentation and Safety
More informationLaboratory: Introduction to Mechatronics. Instructor TA: Edgar Martinez Soberanes Lab 1.
Laboratory: Introduction to Mechatronics Instructor TA: Edgar Martinez Soberanes (eem370@mail.usask.ca) 2017-01-12 Lab 1. Introduction Lab Sessions Lab 1. Introduction to the equipment and tools to be
More informationExperiment 4.A. Speed and Position Control. ECEN 2270 Electronics Design Laboratory 1
.A Speed and Position Control Electronics Design Laboratory 1 Procedures 4.A.0 4.A.1 4.A.2 4.A.3 4.A.4 Turn in your Pre-Lab before doing anything else Speed controller for second wheel Test Arduino Connect
More informationGUIDE TO SP STARTER SHIELD (V3.0)
OVERVIEW: The SP Starter shield provides a complete learning platform for beginners and newbies. The board is equipped with loads of sensors and components like relays, user button, LED, IR Remote and
More informationKENDRIYA VIDYALAYA SANGATHAN
KENDRIYA VIDYALAYA SANGATHAN BENCHMARKING OF COMPUTER LABORATORY NEED FOR COMPUTER LABORATORIES IN KENDRIYA VIDYALAYAS Computer teaching plays a key role in the modern systems of education. The ability
More informationVariable Power Supply Digital Control Circuit Diagram Using Lm317
Variable Power Supply Digital Control Circuit Diagram Using Lm317 DIGITAL POWER SUPPLY USING LM317 A Major Project Report Submitted partial fulfillment of the requirement for the award of the Degree of
More informationCNC MACHINES. Page 1 of 6
CNC MACHINES 3 Deckel Maho - DMU 50 evo Linear Deckel Maho - DMU 40 evo Linear 2 Full 5 Axis Machining Center 5-Axis Universal Machining Center > X-axis 500mm - 9.6" > X-axis 400mm - 5.7" > Y-axis 450mm
More informationDienst Elektronische en Mechanische Ontwikkeling The Electronic and Mechanical Support Division
Dienst Elektronische en Mechanische Ontwikkeling The Electronic and Mechanical Support Division 1 Introduction to DEMO 1/2 DEMO is part of the TU-Delft central support organisation, the University Corporate
More informationCURRICULUM. M.E. (Part Time) (COMPUTER INTEGRATED MANUFACTURING) (Choice Based Credit System) (With effect from )
CURRICULUM M.E. (Part Time) (COMPUTER INTEGRATED MANUFACTURING) (Choice Based Credit System) (With effect from 2008-2009) DEPARTMENT OF MECHANICAL ENGINEERING Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya
More informationINDUSTRIAL TECHNOLOGIES
55 INDUSTRIAL TECHNOLOGIES Contact: Ron Scozzari 41.267.142 rscozzari@northweststate.edu NorthwestState.edu 2017-201 NorthwestState.edu 56 Industrial Technologies Division Northwest State Community College
More information2019 AUTOMOTIVE WEIGHT REDUCTION TECHNOLOGY FAIR
www.autoexpo.co.kr www.autotecexpo.co.kr 2019 AUTOMOTIVE WEIGHT REDUCTION TECHNOLOGY FAIR [Concurrent Event] 2019 AUTOMOTIVE TECHNOLOGY EXPO Date: Venue : April 23(Tue) 25(Thu), 2019 Suwon Convention Center
More informationWhat Can You Automate? We Sell Robots
AUTOMATION SOLUTIONS What Can You Automate? We Sell Robots Let Numatic Engineering s Value Add Services help keep your resources focused on your company s core business. Assembly Manufacturing Outsourcing
More informationMechatronics Resources. for high school. Mechatronics Resources. Preparing your students for success. 21st century learning. Aligned to standards
Preparing your students for success Mechatronics Resources 21st century learning Aligned to standards Knowledge and skills lessons Mechatronics Resources for high school Welcome We re LJ Create, Education
More information464E PLC Trainer, Extended
464E PLC Trainer, Extended GENERAL DESCRIPTION A multi-use training platform allowing for instruction related to the programming and use of industrial PLCs. The basic device is provided without a PLC,
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
More informationRobert G. Landers. Manufacturing Automation and Control Laboratory (130 Toomey)
Robert G. Landers Broad Areas of Research Interests: Controls applications and manufacturing automation Specific Research Interests: Modeling, analysis, monitoring, and control of manufacturing processes
More informationStandard specifications BA006LFE01C01
Standard specifications BA006LF01C01 ###### 1st dition : August 30, 2016 KAWASAKI HAVY INDUSTRIS, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification :
More informationVocational Training Programs
CNC Machinist Course code: 51-4012 Program Title: CNC Machinist Credits: 49.5 600 Clock Hours 24 Weeks Prerequisites: Basic Mathematics Course Description: This course will introduce the student into blueprinting,
More informationIntroduction to CAD for FTC teams. Curtis Volin, Coach, FTC 4631 Eagle Robotics FTC 7373
Introduction to CAD for FTC teams Curtis Volin, Coach, FTC 4631 Eagle Robotics FTC 7373 What is CAD? Computer Aided Design Drawing things for design and prototyping Can also use models as input to simulations
More informationCAD/CAM DESIGN TOOLS. Software supplied with all new and upgraded Boxford Lathes, Mills and Routers
CAD/CAM DESIGN TOOLS Software supplied with all new and upgraded Boxford Lathes, Mills and Routers The Boxford CAD/CAM Design Tools software is a unique suite of integrated CAD and CAM tools designed specifically
More informationCNC MACHINES. Page 1 of 6
2 Deckel Maho - DMU 50 evo Linear Deckel Maho - DMU 50 evo Linear Full 5 Axis Machining Center Full 5 Axis Machining Center > X-axis 500mm - 9.6" > X-axis 500mm - 9.6" > Y-axis 450mm - 7.7" > Y-axis 450mm
More informationMini series. Hand-held Measuring & Testing Instruments
Eurotron Instruments ISO 9001 Q u a li ty n Gra d e t Mini series eurotron "Excellence in measurements" Hand-held Measuring & Testing Instruments GAS Data Logger Manometer Light Meter Anemometer Hygro-
More informationDSD. Unitized or Free-Standing Cutting Tables
DSD Unitized or Free-Standing Cutting Tables The Complete Solution The Aviator DSD from C&G Systems is the next generation of precision profile cutting solutions for any job shop or manufacturer. Aviator
More informationComputer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping
Computer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping Engi 6928 - Fall 2014 3.5 Part programming Structure of an
More informationHigh School Course Guide Manufacturing
8A200 Agricultural Mechanics and Metal Technologies (R) 1 credit Gr: 10-12 Prerequisite: Principles of AFNR Description (only at GHS and SGHS) This course is designed to develop an understanding of agricultural
More informationPolar and Polygon Path Traversal of a Ball and Plate System
Polar and Polygon Path Traversal of a Ball and Plate System Aneeq Zia Electrical Engineering Department, LUMS School of Science and Engineering D.H.A, Lahore Cantt, 54792, Pakistan aneeq91@hotmail.com
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0131 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. DIMENSION 1. Angle Protractor Combination Set $ 0 to 180 35 min Using Angle Blocks, Sine Bar, Slip Gauges & Surface Plate by Comparison Method as per IS 4239 2. Bevel
More information5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING
metaltek PORTABLE CNC ENGINEERING SOLUTIONS metaltek PORTABLE 5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING Manufactured in Australia by Metaltek is a wholly owned subsidiary
More informationI.CH Brushless DC Motor Driver
V II 20100513 I.CH Brushless DC Motor Driver I.CH MOTION CO., LTD MOTION WORLD Characteristic : This control system with perfect function, simple operation, capability of anti-interference, energy saving,
More informationBE/EE189 Design and Construction of Biodevices Lecture 5. BE/EE189 Design and Construction of Biodevices - Caltech
BE/EE189 Design and Construction of Biodevices Lecture 5 LabVIEW Programming Data acquisition DAQ system Signals and signal conditioning Nyquist frequency NI ELVIS II NI-DAQmx and DAQ assistant LabVIEW
More informationautomatic cnc drilling and sawing (opt) lines
MAC s.r.1. MAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1. IMAC s.r.1. IMAC s.r.1. MAC s.r.1. IMAC s.r.1..e~!.'*imac s.r.1. IMAC s.r.1. IMAC s.r.1. MAC s.r.1. [MAC s.r.1. MAC s.r.1.
More informationWhat is Locktronics? Science and technology. Electronics. Engineering. Automotive. Aviation maintenance. Simplifying Electricity & Electronics
What is Locktronics? Simplifying Electricity & Electronics Locktronics is a range of products that simplifies the process of learning and teaching electricity and electronics. The core range consists of
More informationIndustrial Connectors : Fields of Application
Industrial Connectors : Fields of Application Printing Machines C146, C016, C091, C112 Textile Production Machines C146, C016, C091, C112 Soldering Stations / Welding Machines C091, C146 Video / Audio
More informationPower. > 02/2011 Catalogue. beveling. facing. welding. l complete solutions. one source. Machines and tools for tube and pipe preparation.
Power. Machines and tools for tube and pipe preparation. > 02/2011 Catalogue EN orbital cutting. beveling. facing. welding. l complete solutions. one source. precision. power. simplicity. Neuheiten. New
More informationTouch Control Panels. Precision Built Solutions
Touch 2200 Control Panels Precision Built Solutions The Touch 2200 provides world class technology and advanced features not available in other controls proving that east-to-use does not have to mean compromising
More informationEco-Line Band Saws. Economical Sawing Solutions for Manufacturing, Steel Service Centers and Miscellaneous Applications
Eco-Line Band Saws Economical Sawing Solutions for Manufacturing, Steel Service Centers and Miscellaneous Applications Structural integrity is more than an engineering term it s the Peddinghaus way of
More informationAutomatic PCB Drilling Machine
Automatic PCB Drilling Machine M. Alim, S. Goundar, A. Shamim, M. Pillai, R. Singh, K. A. Mamun, P. Chand and U. Mehta School of Engineering and Physics The University of the South Pacific, Laucala Campus,
More informationChapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor
Tools for Design Using AutoCAD and Autodesk Inventor 19-1 Chapter 19 Assembly Modeling with the TETRIX by Pitsco Building System Autodesk Inventor Create and Use Subassemblies in Assemblies Creating an
More informationDINALOG A 96 x 24. Programmable quasi-analogue bar graph meters. Technical characteristics DINALOG A 96 x 24
Bar graph displays For process control, automation, and laboratory applications Current, voltage, resistance, frequency and temperature Up to 0.5% resolution DINALOG A 96 x 24 Programmable quasi-analogue
More informationEngineering Technology Credit Transfer: MPTC Associate Degree to UWGB Bachelor s Degree
Engineering Technology Credit Transfer: MPTC Associate Degree to UWGB Bachelor s Degree In accordance with the University of Wisconsin System guidelines for articulation agreements between UW System institutions
More informationELEC 341 Project Selective Laser Sintering 3D Printer The University of British Columbia
ELEC 341 Project 2017 - Selective Laser Sintering 3D Printer The University of British Columbia In selective laser sintering (SLS), 3D parts are built by spreading a thin layer of metallic powder over
More informationDC - Devices and Controller
123 DC - Devices and Controller 1 DC-0010 Diode laser controller MK1-HP The diode laser module is connected via the 15 pin HD SubD jacket at the rear of the controller. The controller reads the EEPROM
More informationAd van ced M an u factu r i n g
Ad van ced M an u factu r i n g Advanced Manufacturing in the United States has changed dramatically. Today's workers require high-tech precision machining skills to operate leading-edge technology in
More information1 of 21. SGMT Technologies Sdn. Bhd. Optimum: OptiSaw Manual Cold Saw CS315. Optimum: OptiMill MT series
SGMT Technologies Sdn. Bhd. : OptiSaw Manual Cold Saw CS315 's circular saw CS315 comes standard with machine base. Specification: Motor power: 1.5 kw Coolant motor: 40 W Cutting angle: -45 to +45 Speed:
More informationSustainability Technologies Credential: Biofuels Certificate in Sustainability Technologies C40370B. Industrial Technologies
Course Requirements for Green Building Certificate Required Courses (17 SHC) ARC 111 Intro to Arch 1-6-3 CST 111 Construction I 3-3-4 CST 112 Construction II 3-3-4 CST 150 Building Science 2-2-3 SST 140
More informationPrice Each. Bulk Qty.
s subject to change without notice DeWALT SDS+ Masonry Bits Item Number Description Each Bulk Each for Bulk DW5348 BULL POINT 10" SDS+ $ 8.95 DW5350 CHISEL 3/4 X 10 SDS+ $ 8.95 DW5401B25 SDS BIT 5/32 X
More informationPULL THRU WELDER SYSTEM
Machine Tools PULL THRU WELDER SYSTEM Product Information and Specifications Bringing innovation to metal processing equipment Machine Tools Product Information System Overview General Capabilities Pull
More informationAviator SSD shown with optional equipment.
SSD Economical Durable Steel Construction Unitized or Free-Standing Aviator SSD shown with optional equipment. Field Upgradeable to Dual-Side Drive (DSD) The Complete Solution The Aviator SSD from C&G
More informationSpecific nozzle for Lase One torches.
CABLES & SPARE PARTS MICROWELDING TORCH Micro-welding torch for the Lase One generator. Available in two lengths: 1,5m and 3 m. Length 1,5 meters : L1-TM-15 Length 3 meters : L1-TM-30 MICROWELDING TORCH
More informationTHE FACTORY AUTOMATION COMPANY. Power Motion i. CNC + PLC technology for high-performance motion applications. 60 years of CNC experience
THE FACTORY AUTOMATION COMPANY Power Motion i CNC + PLC technology for high-performance motion applications 60 years of CNC experience 100% FANUC experience FANUC is the leading global manufacturer of
More informationCOBRA-1 Monitor Supports Single Screen. COBRA-1 & COBRA-1HD series
Cable Management Weight Gauge Height Adjustable COBRA-1 Monitor Supports Single Screen The COBRA-1 light duty & COBRA-1HD heavy duty monitor arms are designed with elegant styling, smooth operation, unmatched
More informationGantry type CNC plasma/flame Cutting Machine
Gantry type CNC plasma/flame Cutting Machine GSII-4000 Contains 1 Technical Data 2 Machine accuracy 3 - Nesting Software Features 4 Machine Feature details Technical Data Item Descriptions Specification
More informationIndustrial Maintenance Technology
Industrial Maintenance Technology 178 Industrial Maintenance Technology Location: Patterson Campus - Bldg. Q Program Information The Industrial Maintenance Technology Program at is a Multi- Craft curriculum.
More informationM12 Tool Holster
Industry s Number One Sub-Compact System Need tool belt portability in your cordless tools, without sacrificing power and speed? Check out the expanded M12 LITHIUM-ION cordless system from Milwaukee the
More informationUltrasonic Metal Welding
40 khz 20 khz 15kHz Ultrasonic Metal Welding and Benefits Ultrasonic Metal Welding is the ideal process for bonding conductive materials such as copper, aluminum, brass, gold and silver. Excellent welds
More information