Machining and Quality Technician- ASC/Q3509 (Automotive)

Transcription

1 - () 1. Minimum qualification for Trainers Sector name QP Code Job Role Name Minimum Educational Qualification of the Trainer TOTAL Experience (In Years) required for the Trainer Out of Total Experience, Sector Specific Experience (in years) Out of Total Experience, Teaching Experience (in years) Remarks from SSC Machining and ITI/12th ( Science)/ B.Sc Diploma/B.E. in Mech. experience in a Machine Shop of a Manufacturing Organization for ITI/12th (Science)/ B.Sc. experience in a Machine Shop of a Manufacturing Organization for Diploma/B.E. in Mech. working with CNC machines experience will be an added advantage Working experience on CMM, measurement of Geometric parameters of complex components, Gauges & measurement systems tools and problem solving approach SUNAINA SAMRIDDHI FOUNDATION Page 1

2 - () 2. Minimum required Class room & Lab Size ( in sqft) Sector Job Role / Trade Machining and QP code NSQF Job role level type 3 Manufactur ing Lab Size Remark exception Class room Size 1000 sq ft 3. Minimum Qualification of Trainees 8th 4. Prescribed Duration of the training & common norms category Theory Practical Additional Duration: Entreprene urship and Softskills Additional Duration: Digital Literacy - Not to be counted in total hours - trainee will undergo this on his/her own via online - available in English and Regional Languages at indiaskilsonline.com Training Duration (excluding Digital Literacy) Content Available Comm on Norms Categ ory ClassificationA: Regular Class& lab C: High Capex Training involving Hi capex Manufa cturing / Service Yes I C NA Manufa cturing Technical / Non- Technical Industry visit/ojt - Not applicable (NA) Technical 40 SUNAINA SAMRIDDHI FOUNDATION Page 2

3 - () 5. Tools & Equipment required in Lab SSC QPCode Job Role Name NSQF Level Equipment Name 3 Hand Drilling Machine 3 Air Gauge Unit/Plugs/Rings Minimum number of Equipment required (per batch of 30 trainees) Unit Type Is this a mandatory Equipment to be available at the Training Center (Yes/No) 3 Allen Key Set Dimension/Specification/D escription of the Equipment/ ANY OTHER REMARK 3 Bench Drill Standard range 3 Bench Grinder Standard range 3 Bevel Protector 1 units No 3 Collets 2 units Yes SUNAINA SAMRIDDHI FOUNDATION Page 3

4 - () 3 Consumables Like Coolant/Oils 5 litres Yes 3 Cutting Tools (Taps, End Mills, 2 units Yes 3 Dial Indicator With Stand 3 Different Raw Materials-Bars, Blocks Of Steel And Alluminium 4 units Yes each type 3 Ear Plugs 3 First aid kit and fire extinguisher 3 First aid kit and fire extinguisher 3 Grease Gun or greasing equipment with recommended grease 3 Hackshaw (Spare Blade) SUNAINA SAMRIDDHI FOUNDATION Page 4

5 - () 3 Hand Gloves (Rubber) 5 units Yes 3 Height Gauge 3 Holding Fixtures And Jigs 2 units No 3 Lcd Projector & Screen 3 Maintenance Mannual And Machiner Handbook 30 units Yes 3 Micrometer 2 units Yes 3 Milling Machine 3 Pitch Gauge 3 Plug And Snap Gauges SUNAINA SAMRIDDHI FOUNDATION Page 5

6 - () 3 Preferred Machine Other Than Turning 1 units No 3 Radius Gauge 3 Set Of Files, Oil Stone &Deburr Tools 3 Set Of Spanners 3 Slip Gauge Box 3 Small, Medium & Large Auto Components With Drawings 10 units Yes 3 Surface Plate 3 Taper Plug 1 units No 3 Thread Plug/Ring Gauge SUNAINA SAMRIDDHI FOUNDATION Page 6

7 - () 3 Tool Grinder 1 units No 3 Tool Holders 2 units Yes 3 Turning Machines 3 V Block And Clamps 2 units Yes 3 Vernier 2 units Yes 3 Wire Brush (*Tool / Equipment marked not mandatory are optional) SUNAINA SAMRIDDHI FOUNDATION Page 7