REPLACEMENT PART REFERENCE GUIDE, ZYSWA-2-50DR

Transcription

1 REPLACEMENT PART REFERENCE GUIDE, ZYSWA-2-50DR AN ORIGINAL PART: REPLACEMENT PART: ZYSWA-2-50DR ZYSWA-2-50DR+ (RoHS version) Replacement Part has been judged by Mini-Circuits Engineering as a suitable replacement to Original Part a MECHANICAL DIMENSIONS ORIGINAL PART: ZYSWA-2-50DR REPLACEMENT PART: ZYSWA-2-50DR+ Case Style ZZ121 (No Change) AN Rev.: A (09/17/18) M File: AN80019.docx Page 1 OF 6

2 CONCLUSION: 1) FORM-FIT-FUNCTIONAL ANALYSIS a: The Replacement part is Form, Fit compatible. Following is a summary of changes/improvements in the Specification: For typical performance and Graphs: See paragraphs 2 and 3 Parameter Frequency Current Design New Design (MHz) Min. Max. Min. Typ. Max. Min. Typ. Max. Insertion Loss (db) Isolation (db) IN-OUT VSWR (:1) IN PORT VSWR (:1) OUT PORT (ON) VSWR (:1) OUT PORT (OFF) Compression 1 db > > > 23 Max. Input Power (dbm) * Switching time [ns], 50% of Control to 90% RF(Turn-on) and 10% RF(Turn-off) Rise/Fall time [ns] (10%-90%) * Frequency = MHz. AN Rev.: A (09/17/18) M File: AN80019.docx Page 2 OF 6

3 2) TYPICAL PERFORMANCE COMPARISON AT ROOM TEMPERATURE: MODEL: ZYSWA-2-50DR+ (RF Parameters) Frequency Current 1 Unit New 5 Units RF Parameters Low High Min. Ave. Max. Min. Ave. Max. Insertion Loss S-1(ON) (db) Insertion Loss S-2(ON) (db) Isolation S-2 (1-ON) (db) Isolation S-1 (2-ON) (db) Return Loss SUM Port [1(ON)] (db) Return Loss SUM Port [2(ON)] (db) Return Loss Port 1(ON) (db) Return Loss Port 1(OFF) (db) Return Loss Port 2(ON) (db) Return Loss Port 2(OFF) (db) AN Rev.: A (09/17/18) M File: AN80019.docx Page 3 OF 6

4 3) TYPICAL PERFORMANCE GRAPHS AT ROOM TEMPERATURE: MODEL: ZYSWA-2-50DR (Current Design) MODEL: ZYSWA-2-50DR+ (New Design) AN Rev.: A (09/17/18) M File: AN80019.docx Page 4 OF 6

5 4) SWITCHING TIME CHARACTERISTICS AND VIDEO LEAKAGE MODEL: ZYSWA-2-50DR+ (Redesigned Model) Supply Voltage (V) Control voltage (V) 5, -5 5, -5 5, -5 5, -5 5, -5 5,0 5,0 5,0 5,0 5,0 Measurement Port Parameter Unit 1 Unit 2 Unit 3 Unit 4 Unit 5 Port 1 Port 2 Port 1 Port 2 Port 1 Port 2 On time (ns) On time (ns) Rise time (ns) Rise time (ns) On Video Leakage (mv p-p) On Video Leakage (mv p-p) Off time (ns) Off time (ns) Fall time (ns) Fall time (ns) Off Video Leakage (mv p-p) Off Video Leakage (mv p-p) AN Rev.: A (09/17/18) M File: AN80019.docx Page 5 OF 6

6 2015 Mini-Circuits IMPORTANT NOTICE This document is provided as an accommodation to Mini-Circuits customers in connection with Mini-Circuits parts only. In that regard, this document is for informational and guideline purposes only. Mini-Circuits assumes no responsibility for errors or omissions in this document or for any information contained herein. Mini-Circuits may change this document or the Mini-Circuits parts referenced herein (collectively, the Materials ) from time to time, without notice. Mini-Circuits makes no commitment to update or correct any of the Materials, and Mini-Circuits shall have no responsibility whatsoever on account of any updates or corrections to the Materials or Mini-Circuits failure to do so. Mini-Circuits customers are solely responsible for the products, systems, and applications in which Mini-Circuits parts are incorporated or used. In that regard, customers are responsible for consulting with their own engineers and other appropriate professionals who are familiar with the specific products and systems into which Mini-Circuits parts are to be incorporated or used so that the proper selection, installation/integration, use and safeguards are made. Accordingly, Mini-Circuits assumes no liability therefore. In addition, your use of this document and the information contained herein is subject to Mini-Circuits standard terms of use, which are available at Mini-Circuits website at Mini-Circuits and the Mini-Circuits logo are registered trademarks of Scientific Components Corporation d/b/a Mini-Circuits. All other third-party trademarks are the property of their respective owners. A reference to any third-party trademark does not constitute or imply any endorsement, affiliation, sponsorship, or recommendation: (i) by Mini-Circuits of such thirdparty s products, services, processes, or other information; or (ii) by any such third-party of Mini-Circuits or its products, services, processes, or other information. AN Rev.: A (09/17/18) M File: AN80019.docx Page 6 OF 6