Application of the FREEWAT platform in Lavrio, Greece
|
|
|
- Beatrix Spencer
- 6 years ago
- Views:
Transcription
1 Open Workshop 1st FREEWAT User and Developers International Workshop September 21 st 2017 IDAEA. CID - CSIC 16 Jordi Girona Barcelona Application of the FREEWAT platform in Lavrio, Greece Christos Pouliaris, PetroKofakis, Andreas Kallioras (NTUA) Taken from:
2 Presentation contents Presentation of the study area. Conceptual model. Modelling structure. Results. Pros n Cons. Trainings. Further developments.
3 Introduction Lavrio is 50 km SE of the city of Athens. The geology consists mainly of alterations of schist and marble formations, while igneous rocks are also present in the area. All these formations are covered by Quaternary deposits. Two types of aquifers are developed, one in the Quaternary alluvial deposits (granular aquifer) and one in the Upper Marble formation (karstic aquifer). The site offers a typical hydrogeological setting for a Mediterranean coastal aquifer system. The entire aquifer system suffers from: (i) water shortage resulting from both anthropogenic activities (overexploitation) and natural conditions (low precipitation records) (ii) contamination due to the intrusion of seawater and Managed Aquifer Recharge (MAR) applications are envisaged to combat all those. The approach, as developed by the local Municipal Company for Water Supply and Sewerage of Lavrion (DEYATIL S.A.), is to use the treated wastewater that is daily produced by the wastewater treatment plant of the Municipality as a recharge water source in order to artificially recharge the unconsolidated aquifer formation. The proposed SAT system is supported by the local wastewater treatment plant (WWTP) which is capable of continuously providing recharge water with minimal energy costs. The quality of the treated wastewater meets the requirements of the National Legislation for wastewater reuse, through artificial recharge by applying Soil Aquifer Treatment technologies in this specific area.
4 Geological information
5 MAR system
6 Conceptual model of the study area
7 Modelling activities The groundwater flow model for the Lavrio area has been developed in previous steps, so the aim was to adjust it in the FREEWAT platform. The code used is MODFLOW-2005 with the PCG solver. The model has two convertible layers representing the two aquifers, and the simulation is in transient state. The simulation is run for 2.5 years.
8 Layers and HOBS
9 Recharge, pumping and coastal boundaries
10 Results (1 st layer)
11 Results (2 nd layer)
12 Results (Obs vs. Sim Heads)
13 FREEWAT Pros n Cons A user s perspective The groundwaterflow model was succesfully transferred to the FREEWAT platform. The following remarks could be made: Model building is fast and acurate. Large models (layers, cell number, boundary conditions) can be deat with without problems. GIS capabilities can be used for pre and post processing. Model built was comparable to the original model in all aspects (water budgets, simulated heads etc). Yet, some more points should be mentioned: Bugs that are potentially still there. Local grid refinement. Model development might be problematic sometimes due to different representation/structure between conventional MODFLOW GUIs and FREEWAT.
14 Training Within FREEWAT almost 70 were trainined and 60 have seen a FREEWAT presentation in 2 international conference. This has provided some experience and ideas on how to improve the traning activities, both for traners and traine
15 No installation alternatives FREEWAT portable FREEWAT Portable is a packaged, ready to use FREEWAT portable installation (you can run without having to run an installer). Intended for users that do not want to install QGIS, or create and keep any data folders (\user\.qgis2 folder) in their user (home) folder. It does not write to the Windows registry or store its configuration files in the user's profile; instead, it stores its configuration files in the portable directory. The FREEWAT Portable folder can be stored on any storage facility, including internal mass storage, a file share, or external storage such as USB drives.
16 FREEWAT portable / 2 It contains QGIS (version 2.18 LTR) + FREEWAT plug-in (version 0.5). USB drive You can create USB flash drives ready to use that can be distributed to the trainees, thus accelerate the training process. Installation Execution Copy freewat_portable.7z archive to the destination folder (or external USB drive). Use 7-Zip (or any other compression software) to extract the freewat_portable folder and its contents. Double click the qgis.bat to start QGIS with FREEWAT plug-in.
17 FREEWAT portable / 3 The qgis.bat file that launches FREEWAT portable:
18 Linux XRDP Linux Ubuntu Server LTS + XRDP + QGIS ver 2.18 The idea is to provide many remote desktops from one physical server to many students that connect remotely from a client (RDP). Pros: no need to set up anything on the client computer, each student has his own account and project setup. Cons: the graphics rendering is slow if you are not connected on the same local network (e.g. University) and are connected remotely (e.g. via ADSL from home).
19 Mac OSX One possible option for users that use Mac which will not receive the support the FREEWAT group : The preparation of a Linux virtual machine image (e.g. VirtualBox) that the user could run in his host computer Pros: The user is working in his own environment (e.g. Mac OS). No need to install QGIS. Cons: requires the installation of VirtualBox or other virtualization software. Might be a bit slower, although we have not noticed any performance problem running a VirtualBox Linux image. The RAM memory use is low.
20 Mac OSX / 2 Another option is: The preparation of a live Linux image that the user could boot and run e.g. from a USB memory stick. Pros: The rendering of graphics should be faster. In the case of a workshop you can distribute the USB flash memory sticks to each participant/student. Cons: The user is not working in his own environment.
21 Thank you for your attention!!!
FREEWAT. FREE and open source software tools for WATer resource management. FREEWAT platform v.1.0 and User Manual v.1.0
FREE and open source software tools for WATer resource management FREEWAT platform v.1.0 and User Manual v.1.0 Deliverable No. D2.9 Version 2.1 Version Date 30.09.2017 Author(s) Dissemination Level Status
MODFLOW UZF Package The MODFLOW Unsaturated-Zone Flow (UZF) Package Interface in GMS
v. 10.2 GMS 10.2 Tutorial The MODFLOW Unsaturated-Zone Flow (UZF) Package Interface in GMS Objectives This tutorial explains how to use the MODFLOW Unsaturated-Zone Flow (UZF) package and compares it to
GMS 9.2 Tutorial SEAWAT Conceptual Model Approach Create a SEAWAT model in GMS using the conceptual model approach
v. 9.2 GMS 9.2 Tutorial Create a SEAWAT model in GMS using the conceptual model approach Objectives Create a SEAWAT model in GMS using the conceptual model approach which involves using the GIS tools in
SEAWAT Conceptual Model Approach Create a SEAWAT model in GMS using the conceptual model approach
v. 10.1 GMS 10.1 Tutorial Create a SEAWAT model in GMS using the conceptual model approach Objectives Learn to create a SEAWAT model in GMS using the conceptual model approach. Use the GIS tools in the
Create a SEAWAT model in GMS using the conceptual model approach
v. 10.4 GMS 10.4 Tutorial Create a SEAWAT model in GMS using the conceptual model approach Objectives Learn to create a SEAWAT model in GMS using the conceptual model approach. Use the GIS tools in the
GMS 10.0 Tutorial SEAWAT Conceptual Model Approach Create a SEAWAT model in GMS using the conceptual model approach
v. 10.0 GMS 10.0 Tutorial Create a SEAWAT model in GMS using the conceptual model approach Objectives Create a SEAWAT model in GMS using the conceptual model approach, which involves using the GIS tools
MODFLOW Lake Package GMS TUTORIALS
GMS TUTORIALS MODFLOW Lake Package This tutorial illustrates the steps involved in using the Lake (LAK3) Package as part of a MODFLOW simulation. The Lake Package is a more sophisticated alternative to
GMS 8.3 Tutorial MODFLOW LAK Package Use the MODFLOW Lake (LAK3) package to simulate mine dewatering
v. 8.3 GMS 8.3 Tutorial Use the MODFLOW Lake (LAK3) package to simulate mine dewatering Objectives Learn the steps involved in using the MODFLOW Lake (LAK3) package interface in GMS. Use the LAK3 package
MODFLOW Model Calibration
GMS 7.0 TUTORIALS MODFLOW Model Calibration 1 Introduction An important part of any groundwater modeling exercise is the model calibration process. In order for a groundwater model to be used in any type
MGO Tutorial - Dewatering Scenario
MGO Tutorial - Dewatering Scenario Introduction Pumping well optimization technology is used to determine the ideal pumping well locations, and ideal pumping rates at these locations, in order to minimize
v GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models
v. 10.0 GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
Tutorial: MODFLOW-USG Tutorial
Tutorial: Visual MODFLOW Flex 5.0 Integrated Conceptual & Numerical Groundwater Modeling Software 1 1 Visual MODFLOW Flex 5.0 The following example is a walk through of creating a MODFLOW-USG groundwater
User s Manual. Hi-Speed USB 2.0 Flash Disk
User s Manual Hi-Speed USB 2.0 Flash Disk Contents Introduction...3 Features System.........3 Requirements.......3 Before use.....4 Driver Installation...4 Driver Installation for Windows 98/98SE.........4
Use the MODFLOW Lake (LAK3) package to simulate mine dewatering
v. 10.3 GMS 10.3 Tutorial Use the MODFLOW Lake (LAK3) package to simulate mine dewatering Objectives Learn the steps involved in using the MODFLOW Lake (LAK3) package interface in GMS. This tutorial will
Importing VMOD Classic Projects. Visual MODFLOW Flex. Integrated Conceptual & Numerical Groundwater Modeling
Importing VMOD Classic Projects Visual MODFLOW Flex Integrated Conceptual & Numerical Groundwater Modeling Importing Visual MODFLOW Classic Models Tutorial The following example is a quick walk through
MGO Tutorial - Dewatering Scenario
MGO Tutorial - Dewatering Scenario Introduction 1.0.1 Background Pumping well optimization technology is used to determine the ideal pumping well locations, and ideal pumping rates at these locations,
v. 9.2 GMS 9.2 Tutorial MODFLOW MNW2 Package Use the MNW2 package with the sample problem and a conceptual model Prerequisite Tutorials
v. 9.2 GMS 9.2 Tutorial Use the MNW2 package with the sample problem and a conceptual model Objectives Learn how to use the MNW2 package in GMS and compare it to the WEL package. Both packages can be used
Objectives Build a 3D mesh and a FEMWATER flow model using the conceptual model approach. Run the model and examine the results.
v. 10.0 GMS 10.0 Tutorial Build a FEMWATER model to simulate flow Objectives Build a 3D mesh and a FEMWATER flow model using the conceptual model approach. Run the model and examine the results. Prerequisite
MODFLOW Regional to Local Model Conversion,
v. 10.2 GMS 10.2 Tutorial MODFLOW Regional to Local Model Conversion, Steady State Create a local model from a regional model using convenient tools provided in GMS Objectives Use the convenient tools
v MODFLOW NWT Use MODFLOW NWT with a Simple Model GMS Tutorials Time minutes Prerequisite Tutorials MODFLOW Grid Approach
v. 10.2 GMS 10.2 Tutorial Use with a Simple Model Objectives Compare the enhanced ability to handle cell drying and rewetting of to MODFLOW 2000. Prerequisite Tutorials MODFLOW Grid Approach Required Components
1. Open a MODFLOW simulation and run MODFLOW. 2. Initialize MT3D and enter the data for several MT3D packages. 3. Run MT3D and read the solution.
GMS TUTORIALS This tutorial describes how to perform an MT3DMS simulation within GMS. An MT3DMS model can be constructed in GMS using one of two approaches: the conceptual model approach or the grid approach.
GMS 8.3 Tutorial MODFLOW Stochastic Modeling, Inverse Use PEST to calibrate multiple MODFLOW simulations using material sets
v. 8.3 GMS 8.3 Tutorial Use PEST to calibrate multiple MODFLOW simulations using material sets Objectives The Stochastic inverse modeling option for MODFLOW is described. Multiple MODFLOW models with equally
MT3DMS Grid Approach GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents
GMS 7.0 TUTORIALS 1 Introduction This tutorial describes how to perform an MT3DMS simulation within GMS. An MT3DMS model can be constructed in GMS using one of two approaches: the conceptual model approach
GMS 10.3 Tutorial SEAWAT Hele-Shaw Experiment Simulate the Hele-Shaw Salt Lake experiment using SEAWAT in GMS
v. 10.3 GMS 10.3 Tutorial SEAWAT Hele-Shaw Experiment Simulate the Hele-Shaw Salt Lake experiment using SEAWAT in GMS Objectives Construct and run a SEAWAT model in GMS using the grid approach. The model
Tutorial - Importing VMOD Classic Projects. Visual MODFLOW Flex. Integrated Conceptual & Numerical Groundwater Modeling
Tutorial - Importing VMOD Classic Projects Visual MODFLOW Flex Integrated Conceptual & Numerical Groundwater Modeling Importing Visual MODFLOW Classic Models Tutorial The following example is a quick walk
Groundwater in Hydrologic Cycle
Groundwater in Hydrologic Cycle Types of Terrestrial Water Surface Water Soil Moisture Ground water Pores Full of Combination of Air and Water Unsaturated Zone / Zone of Aeration / Vadose (Soil Water)
MGO Tutorial: Plume Management
MGO Tutorial: Plume Management Introduction Pumping well optimization technology is used to determine the ideal pumping well locations, and ideal pumping rates at these locations, in order to minimize
v. 8.2 GMS 8.2 Tutorial MODFLOW NWT Use MODFLOW-NWT With a Simple Model Prerequisite Tutorials MODFLOW - Grid Approach Time minutes
v. 8.2 GMS 8.2 Tutorial MODFLOW NWT Use MODFLOW-NWT With a Simple Model Objectives Compare the enhanced ability to handle cell drying and rewetting of MODFLOW-NWT to MODFLOW 2000. Prerequisite Tutorials
v MODFLOW SUB Package The MODFLOW SUB Package Interface in GMS GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial The MODFLOW SUB Package Interface in GMS Objectives Learn how to use the MODFLOW SUB package interface in GMS. Prerequisite Tutorials MODFLOW Conceptual Model Approach I Required
v MODFLOW Transient Calibration Calibrating transient MODFLOW models GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation in GMS.
v. 9.1 GMS 9.1 Tutorial Using rasters for interpolation and visualization in GMS Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation
v GMS 10.0 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models
v. 10.0 GMS 10.0 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation
v GMS 10.0 Tutorial MODFLOW SUB Package The MODFLOW SUB Package Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.0 GMS 10.0 Tutorial The MODFLOW SUB Package Interface in GMS Objectives Learn how to use the MODFLOW SUB package interface in GMS. Prerequisite Tutorials MODFLOW Conceptual Model Approach I Required
GMS 9.1 Tutorial MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 9.1 GMS 9.1 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual model
v. 9.0 GMS 9.0 Tutorial MODPATH The MODPATH Interface in GMS Prerequisite Tutorials None Time minutes
v. 9.0 GMS 9.0 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, different ways to display pathlines,
SEAWAT 4 Tutorial - Example Problem
SEAWAT 4 Tutorial - Example Problem Introduction About SEAWAT-4 SEAWAT-4 is the latest release of SEAWAT computer program for simulation of threedimensional, variable-density, transient ground-water flow
v MODPATH GMS 10.3 Tutorial The MODPATH Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.3 GMS 10.3 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, displaying pathlines in different
DRIVE ENCLOSURE USER MANUAL MODELS & VERSION 2
DRIVE ENCLOSURE USER MANUAL MODELS 130295 & 130349 VERSION 2 At Right: Model 130295 Below: Model 130349 manhattanproducts.com MAN-130295/130349-UM-0515-04 INTRODUCTION Thank you for purchasing this Manhattan
MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models
v. 10.2 GMS 10.2 Tutorial Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation data, and use PEST to calibrate the model. Prerequisite
Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
v. 10.3 GMS 10.3 Tutorial The MODFLOW drain return package Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
GMS 9.1 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 9.1 GMS 9.1 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
MODFLOW - SWI2 Package, Two-Aquifer System. A Simple Example Using the MODFLOW SWI2 (Seawater Intrusion) Package
v. 10.3 GMS 10.3 Tutorial A Simple Example Using the MODFLOW SWI2 (Seawater Intrusion) Package Objectives Become familiar with the interface to the MODFLOW SWI2 package in GMS. Prerequisite Tutorials MODFLOW
FINITE DIFFERENCE SPREADSHEETS OF YOUR MODELS
FINITE DIFFERENCE SPREADSHEETS OF YOUR MODELS #1: Always indicate units. Units always need to be consistent in xls and modflow xyzwkq etc Cell size can easily be adjusted to make a reasonable size for
MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo II. Use results from PEST NSMC to evaluate the probability of a prediction
v. 10.3 GMS 10.3 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo II Use results from PEST NSMC to evaluate the probability of a prediction Objectives Learn how to use the results from
GMS 10.0 Tutorial MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 10.0 GMS 10.0 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual
GMS 10.0 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 10.0 GMS 10.0 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map Module to develop
Tutorial: Importing VMOD/MODFLOW Models
Tutorial: Visual MODFLOW Flex 5.0 Integrated Conceptual & Numerical Groundwater Modeling Software 1 1 Visual MODFLOW Flex 5.0 The following example is a quick walk-through of the basics of importing an
v GMS 10.4 Tutorial FEMWATER Transport Model Build a FEMWATER model to simulate salinity intrusion
v. 10.4 GMS 10.4 Tutorial FEMWATER Transport Model Build a FEMWATER model to simulate salinity intrusion Objectives This tutorial demonstrates building a FEMWATER transport model using the conceptual model
SEAWAT Tutorial - Elder Model
SEAWAT Tutorial - Elder Model Introduction Saltwater intrusion is a common occurrence along coastlines throughout the world. Saltwater is denser than freshwater, and consequently will tend to migrate inland
v MODFLOW Grid Approach Build a MODFLOW model on a 3D grid GMS Tutorials Time minutes Prerequisite Tutorials None
v. 10.2 GMS 10.2 Tutorial Build a MODFLOW model on a 3D grid Objectives The grid approach to MODFLOW pre-processing is described in this tutorial. In most cases, the conceptual model approach is more powerful
MODFLOW - Conceptual Model Approach
GMS 7.0 TUTORIALS MODFLOW - Conceptual Model Approach 1 Introduction Two approaches can be used to construct a MODFLOW simulation in GMS: the grid approach or the conceptual model approach. The grid approach
FEFLOW simulation of dynamic groundwater flow and solute transport
FEFLOW simulation of dynamic groundwater flow and solute transport Post Doctoral Associate Aarhus University Research Foundation TATION presen Outline Scientific motivation The FEFLOW model The FEFLOW
GMS 9.0 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 9.0 GMS 9.0 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
Model as a Service (MaaS): middle and high school students learn about groundwater
Model as a Service (MaaS): middle and high school students learn about groundwater using MODFLOW Summary Jointly with the Office of Mathematics, Science, and Technology Education (MSTE) at University of
Andrew Lee BEng (Hons) CEng MIStructE FGS FPWS
Jim Twaddle BSc (Hons) FGS Andrew Lee BEng (Hons) CEng MIStructE FGS FPWS 11 June 2010 ME50252/RE001 !! " # $ $ % # & " '(! ) # $ $ % * $ ( & " # $ $ % $ # $ $ % +, $ # $ $ % #! " $ # $ $ % -! $ # $ $
MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 10.2 GMS 10.2 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
softmc Simulator Installation Guide Revision 1.2
Installation Guide Revision 1.2 Revision History Doc.Rev. Date Remarks 1.2 Dec 2017 Update softmc link use softmc 3 1.1 July 2016 Minor updates 1.0 Jan. 2015 Initial release Copyright Notice Disclaimer
v GMS 10.4 Tutorial MODFLOW-USG CLN Observations Create CLN well observations in GMS Prerequisite Tutorials MODFLOW-USG CLN Process
v. 10.4 GMS 10.4 Tutorial MODFLOW-USG CLN Observations Create CLN well observations in GMS Objectives Learn how to create CLN well observations. Prerequisite Tutorials MODFLOW-USG CLN Process Required
v. 9.1 GMS 9.1 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Prerequisite Tutorials
v. 9.1 GMS 9.1 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation data,
Tutorial: Conceptual Modeling Tutorial. Integrated Conceptual & Numerical Groundwater Modeling Software by Waterloo Hydrogeologic
Tutorial: Visual MODFLOW Flex 5.1 Integrated Conceptual & Numerical Groundwater Modeling Software 1 1 Visual MODFLOW Flex 5.1 The following example is a quick walk-through of the basics of building a conceptual
Ubuntu Install Instructions Mac Usb In Windows 7 Using Virtualbox
Ubuntu Install Instructions Mac Usb In Windows 7 Using Virtualbox There are some access denied issues but this guide shows how to solve them. Booting a virtual machine from USB disk is sometimes necessary
GMS Tutorials MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach
GMS Tutorials MODFLOW Conceptual Model Approach I GMS 10.4 Tutorial MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach v. 10.4 Objectives
GMS 9.1 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo II Use results from PEST NSMC to evaluate the probability of a prediction
v. 9.1 GMS 9.1 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo II Use results from PEST NSMC to evaluate the probability of a prediction Objectives Learn how to use the results from a
v GMS 10.0 Tutorial MODFLOW Grid Approach Build a MODFLOW model on a 3D grid Prerequisite Tutorials None Time minutes
v. 10.0 GMS 10.0 Tutorial Build a MODFLOW model on a 3D grid Objectives The grid approach to MODFLOW pre-processing is described in this tutorial. In most cases, the conceptual model approach is more powerful
v Prerequisite Tutorials Required Components Time
v. 10.0 GMS 10.0 Tutorial MODFLOW Stochastic Modeling, Parameter Randomization Run MODFLOW in Stochastic (Monte Carlo) Mode by Randomly Varying Parameters Objectives Learn how to develop a stochastic (Monte
GMS 9.0 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo I Use PEST to create multiple calibrated MODFLOW simulations
v. 9.0 GMS 9.0 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo I Use PEST to create multiple calibrated MODFLOW simulations Objectives The PEST Null Space Monte Carlo modeling option
MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 10.1 GMS 10.1 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual
New Engines. The following SEAWAT flow packages are supported in Visual MODFLOW Flex:
Visual MODFLOW Flex provides vibrant tools and time-saving workflow options, giving you the ability to efficiently build complex groundwater models. Visually stunning projects are at your fingertips with
Manual Java Install Mac Os X Mountain Lion From Usb
Manual Java Install Mac Os X Mountain Lion From Usb I uninstalled java 8 on Mac OSX 10.8.2 and tried installing Java 7, but the installation failed. I put the Java 8 installer on a usb and tried installing
3.2 Importing VMOD/MODFLOW Models
52 In addition, this new model run will appear in the model tree. The model run has a grid and corresponding inputs; this can also be seen in the figure above. When the conversion is complete, click (Next
v MODFLOW Stochastic Modeling, Parameter Randomization GMS 10.3 Tutorial
v. 10.3 GMS 10.3 Tutorial MODFLOW Stochastic Modeling, Parameter Randomization Run MODFLOW in Stochastic (Monte Carlo) Mode by Randomly Varying Parameters Objectives Learn how to develop a stochastic (Monte
v MODFLOW Managing Transient Data GMS 10.3 Tutorial Creating transient MODFLOW models with time-varying inputs
v. 10.3 GMS 10.3 Tutorial Creating transient MODFLOW models with time-varying inputs Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow all data
Visual MODFLOW Pro V 4.3
Visual MODFLOW Pro V 4.3 The Proven Standard for Professional Groundwater Flow and Contaminant Transport Modeling Visual MODFLOW Pro s three-dimensional groundwater flow and contaminant transport modeling
MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo I. Use PEST to create multiple calibrated MODFLOW simulations
v. 10.1 GMS 10.1 Tutorial MODFLOW Stochastic Modeling, PEST Null Space Monte Carlo I Use PEST to create multiple calibrated MODFLOW simulations Objectives The PEST Null Space Monte Carlo modeling option
IT ESSENTIALS V. 4.1 Module 5 Fundamental Operating Systems
IT ESSENTIALS V. 4.1 Module 5 Fundamental Operating Systems 5.0 Introduction 1. What controls almost all functions on a computer? The operating system 5.1 Explain the purpose of an operating system 2.
3.1 Conceptual Modeling
Quick Start Tutorials 35 3.1 Conceptual Modeling Conceptual Modeling Tutorial The following example is a quick walk through of the basics of building a conceptual model and converting this to a numerical
Making a Bootable Linux USB Flash Drive with the Universal USB Installer.
Making a Bootable Linux USB Flash Drive with the Universal USB Installer. Insert the target USB flash drive into the USB port before starting the installer program. This is the start up screen for the
A COMPARISON OF FREE "VIRTUAL MACHINE PROGRAMS" FOR YOUR REAL "WINDOWS.." COMPUTER
A COMPARISON OF FREE "VIRTUAL MACHINE PROGRAMS" FOR YOUR REAL "WINDOWS.." COMPUTER 1 Web location for this presentation: http://aztcs.org Click on Meeting Notes 2 SUMMARY At the present time, you have
8 MANAGING SHARED FOLDERS & DATA
MANAGING SHARED FOLDERS & DATA STORAGE.1 Introduction to Windows XP File Structure.1.1 File.1.2 Folder.1.3 Drives.2 Windows XP files and folders Sharing.2.1 Simple File Sharing.2.2 Levels of access to
Manual Format Flash Drive Mac Os X Lion Bootable Usb
Manual Format Flash Drive Mac Os X Lion Bootable Usb So, Apple continues to give you the option of creating a bootable USB drive. Use this link to take you right to its landing page, or search for it manually
Manual Install Ubuntu Alongside Windows 7 From Usb
Manual Install Ubuntu 12.04 Alongside Windows 7 From Usb First off, I had to create a UEFI 3.0 USB stick for the WIN7 install because it would not it doesn't recognize the WIN7 OS, and I would need to
v MT3DMS Conceptual Model Approach GMS 10.3 Tutorial Using MT3DMS with a conceptual model
v. 10.3 GMS 10.3 Tutorial Using MT3DMS with a conceptual model Objectives Learn how to use a conceptual model when using MT3DMS. Perform two transport simulations, analyzing the long-term potential for
Installing MediaWiki using VirtualBox
Installing MediaWiki using VirtualBox Install VirtualBox with your package manager or download it from the https://www.virtualbox.org/ website and follow the installation instructions. Load an Image For
Transmission Mac User Guide Apple Os X Lion 10.7
Transmission Mac User Guide Apple Os X Lion 10.7 Note: For information about printing in OS X Lion, please see this article instead. A generated PDF of your print job is sent to your Fax device for transmission.
lecture 8 Groundwater Modelling -1
The Islamic University of Gaza Faculty of Engineering Civil Engineering Department Water Resources Msc. Groundwater Hydrology- ENGC 6301 lecture 8 Groundwater Modelling -1 Instructor: Dr. Yunes Mogheir
Introduction to Puppy Linux: Installation on a USB Flash Disk
Introduction to Puppy Linux: Installation on a USB Flash Disk Alex Gotev 1 Contents What is Puppy Linux? How can I have it? How do I boot it? What programs does it include? Installation on a USB Flash
QGIS GML application schema toolbox guided tour use case on French Groundwater Information Network (GIN)
QGIS GML application schema toolbox guided tour use case on French Groundwater Information Network (GIN) S.Grellet BRGM / H.Mercier Oslandia French GIN linked data use case > Objectives To provide stable
Visual MODFLOW Premium is the industry standard in three-dimensional groundwater flow and contaminant transport modeling software
Visual MODFLOW Premium V 4.3 Visual MODFLOW Premium is the industry standard in three-dimensional groundwater flow and contaminant transport modeling software Visual MODFLOW Premium s three-dimensional
VIRTUALBOX UBUNTU EBOOK
17 March, 2018 VIRTUALBOX UBUNTU EBOOK Document Filetype: PDF 277.47 KB 0 VIRTUALBOX UBUNTU EBOOK It installs on your existing Intel or AMD-based computers, whether they are running Windows, Mac, Linux
Using GIS for hierarchial refinement of MODFLOW models
HydroGÏS 96: Application of Geographic Information Systems in Hydrology and Water Resources Management (Proceedings of the Vienna Conference, April 1996). IAHS Publ. no. 235, 1996. 535 Using GIS for hierarchial
v. 9.2 GMS 9.2 Tutorial MODFLOW Managing Transient Data Creating transient MODFLOW models with time-varying inputs Prerequisite Tutorials
v. 9.2 GMS 9.2 Tutorial Creating transient MODFLOW models with time-varying inputs Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow all data
EECS 1710 SETTING UP A VIRTUAL MACHINE (for EECS labs)
EECS 1710 SETTING UP A VIRTUAL MACHINE (for EECS labs) In this tutorial, we will work through the process of setting up a virtual machine on your home desktop/laptop, that reflects the working environment
Manual Format Flash Drive Mac Os X Lion Startup
Manual Format Flash Drive Mac Os X Lion Startup Learn more about Boot Camp and its features for OS X Lion and Mountain Lion. on Mac computers that do not have an optical drive, with a USB flash drive that
Kodak i1100 Series Scanners Windows Drivers Release Notes
Version CD 3.01 and Firmware 1.32 or 1.36 Summary Purpose of Release: This is a CPE release of drivers for the Kodak i1100 (i1150, i1190, i1190e, i1180) Scanner family. Note: The drivers only file, InstallSoftware_i11xx_v3.1.exe,
Microsoft Excel 2010 Full Version For Windows 7 64 Bit
Microsoft Excel 2010 Full Version For Windows 7 64 Bit microsoft excel 64 bit free download for Windows 7 - Quick Tools for Microsoft have finally launched a first Beta version of the much anticipated
SAP GUI 7.30 for Windows Computer
SAP GUI 7.30 for Windows Computer Student and Faculty Installation Instructions Table of Contents Caution:... 2 System Requirements:... 2 System Memory (RAM) requirements:... 2 Disk Space requirements:...
Visual MODFLOW Premium with MODFLOW SURFACT
Visual MODFLOW Premium with MODFLOW SURFACT A Step-by-Step Tutorial for the MODFLOW-SURFACT Trial Version Waterloo Hydrogeologic TABLE OF CONTENTS Introduction..............................................
GUIDE. MetaDefender Kiosk Deployment Guide
GUIDE MetaDefender Kiosk Deployment Guide 1 SECTION 1.0 Recommended Deployment of MetaDefender Kiosk(s) OPSWAT s MetaDefender Kiosk product is deployed by organizations to scan portable media and detect
USB Type-C Dual Port Gigabit. Ethernet Cable
USB Type-C Dual Port Gigabit Ethernet Cable User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction...
MT3DMS Advanced Transport MT3DMS dispersion, sorption, and dual domain options
v. 10.1 GMS 10.1 Tutorial MT3DMS dispersion, sorption, and dual domain options Objectives Learn about the dispersion, sorption, and dual domain options in MT3DMS Prerequisite Tutorials MT2DMS Grid Approach