Managing System Administration Settings

Transcription

1 This chapter contains the following sections: Setting up the Outgoing Mail Server, page 2 Working with Templates, page 2 Configuring System Parameters (Optional), page 5 Updating the License, page 6 Verifying License Utilization, page 7 Viewing License Utilization History, page 7 Viewing Resource Usage Data, page 8 Application Categories, page 8 Customizing the Portal, page 10 Customizing Reports, page 14 Enabling Advanced Controls, page 15 Enabling the Service Provider Feature, page 16 User Menus, page 17 Setting User Permissions, page 18 System Tasks, page 18 Managing Icons, page 22 Tag Library, page 25 Support Information, page 26 Database Audit Logging, page 29 1

2 Setting up the Outgoing Mail Server Setting up the Outgoing Mail Server All outgoing s from Cisco UCS Director require an SMTP server. Choose the Mail Setup tab. In the Mail Setup pane, complete the following fields: Outgoing Server (SMTP) field Outgoing SMTP Port field Outgoing SMTP User field Outgoing SMTP Password field Outgoing Sender Address field Server IP address field Send Test check box The outgoing SMTP server address. The outgoing SMTP server port number. The user ID. The user password. The sender s address The IP address or DNS name of the Cisco UCS Director virtual appliance. This field is used to create proper links in s for user workflow actions. Check this check box to test the current settings. Click Save. Working with Templates Cisco UCS Director has a notification mechanism that enables you to configure s to be sent to an administrator when specific events occur, such as when a VM is provisioned. In addition, if approvals are required for any task, an notification can be sent to an administrator or to the group administrator. Note You can specify multiple recipients for an notification. Use a comma as a separator for multiple addresses. Cisco UCS Director provides a set of templates in the HTML format that cover different scenarios. The following are some of the tasks that you can perform with templates library: Add a new template 2

3 Adding an Template Edit an existing template You can edit the subject and message details, or the formatting and presentation fields of an template. Do not modify any Java-related information in the template. Preview an template You can preview the content and determine if the template needs modification. Set an template as default You can set notifications to be sent based on the default template. Delete an template You can delete the templates that you have added. However, you cannot delete a template if it meets one of the following criteria: You added a template and set it as a default template. It is a system-provided template. Adding an Template Click the Templates tab. Click Add (+). In the Add Template dialog box, complete the following fields: Template field Template field Template Type drop-down list Subject field Reset to Default Subject check box Body field Reset to Default Body check box The name of the template. The description of the template. Select the type of template that you are adding. This drop-down list is populated with the system-provided templates. The subject line for the template. If you check this check box, the subject line you entered is cleared, and the system-provided subject line is populated in the Subject field. The HTML code that defines the template, such as the content, font size and color, the notification triggers, and so on. If you check this box, the HTML code used in the system-provided template is populated in the Script field. After the HTML code is populated, to retain the changes you made to the code, you must uncheck this box. 3

4 Previewing an Template What to Do Next Preview the template to determine if you need to make more changes. Previewing an Template After you create a new template in Cisco UCS Director, you can preview the content to determine if you need to make any additional changes. Click the Templates tab. Choose an template from the table. Click Preview Template. In the Launch Report dialog box, click Submit. Note The preview mode of an template displays only static information. Dynamic information such as the customer name, or resources, is not displayed. What to Do Next If necessary, you can return to the template to make additional changes. Setting a Default Template Usually, a system template is set as the default template. If you have added multiple templates for a specific scenario, you can choose to select one of these templates as a default template. Setting a template as default means that the selected template is used for notification. Click the Templates tab. Choose an template from the table. Click Set As Default Template. 4

5 Configuring System Parameters (Optional) Configuring System Parameters (Optional) Configuring System Parameters You should edit the system parameters only if you need to change the default values. Choose the System Parameters tab. In the System pane, complete the following fields: Number of Days to Keep Deleted VMs Data field Number of Days to Keep Events field Number of Days to Keep Trend Data field Number of Days to Keep Metering Data drop-down list Download VM Locking Controls from URL field Currency drop-down list The user-defined number of days that the system retains VM data. The user-defined number of days that the system retains all events. Note Events older than the specified time period are deleted. The user-defined number of days that the system retains trend data or historical data of the inventory (such as CPU, storage, and memory usage). Note This data is used for reporting. Choose the number of days that the system retains VM metering records. Note This data is specific to VMs and their resources. The URL of the VM locking controls file that is hosted on a server that is accessible from the system that is running Cisco UCS Director. Note This file must be in XML format. For more information on creating this VM locking controls file, see Locking VMs in Cisco UCS Director. Choose the type of currency to use. Available currencies are US, EURO, GBP, KRW, CAD, CHF, CLP, NR, JPY, AUD, NZD, SGD, HKD, MYR, MXN, BRL, AED, DKK, SEK, KWD, CYN, RUB, ZAR, and Other. 5

6 Configuring Infrastructure System Parameters (Optional) Currency field Currency Precision drop-down list Funds Availability Check Interval (mins) drop-down list Enter the currency name (one only). Note This field appears when Other is chosen as the currency. Choose the currency precision in decimal points. Available precision is from 0 to 5 decimal points. Choose a time interval to check the availability of funds. Click Save. Configuring Infrastructure System Parameters (Optional) You can set parameters for polling the virtual and physical system infrastructure resources. Choose the Infrastructure System Parameters tab. In the entry box, enter the number of days to keep trend data for the system infrastructure. The default is 30 days. Click Save. Updating the License You can update the license using the Product Authorization Key (PAK). Step 6 On the menu bar, choose Administration > License. Choose the License Keys tab. Click the Update License option. The Update PAK dialog box is displayed. Click Browse to navigate and to choose the PAK license file. Click Upload to upload the PAK license file. Note If the license file does not upload, check the check box and copy and paste the license text into the license text field. 6

7 Verifying License Utilization The license is updated. Verifying License Utilization The License Utilization page shows the licenses in use and details about each license, including license limit, available quantity, status, and remarks. License audits can also be run from this page. On the menu bar, choose Administration > License. Choose the License Utilization tab. Choose a Cisco UCS Director appliance. (Optional) To run a license audit, click Run License Audit. In the Run License Audit dialog box, click Submit. This process takes several minutes to run. Viewing License Utilization History The number of licensed network and storage controllers, servers, server and desktop VMs, and small and medium pods can be tracked over time to see how network resources are being utilized. On the menu bar, choose Administration > License. Choose the License Utilization History tab. The license utilization history is displayed for the following resource categories, with timestamp: Network Controllers Storage Controllers Servers Server VMs Desktop VMs Small pods Medium pods 7

8 Viewing Resource Usage Data Viewing Resource Usage Data You can view how resources are being utilized in your environment. On the menu bar, choose Administration > License. Choose the Resource Usage Data tab. Following are the available report categories: Resource of the available resources associated with Cisco UCS Director. Resource Count Quantity of each available resource. Application Categories Application categories are an optional configuration that enable you to define the type of workload for a VM. If you do not use application categories, Cisco UCS Director assumes that all VMs provisioned for your users are generic VMs and configures them to handle CPU-intensive workloads. Whether you choose to use the default application categories or to create your own, you can provide your users with a pre-defined set of workloads that match their application needs. The workload options for application categories include the following: CPU intensive Network I/O intensive Disk I/O intensive Memory intensive Any combination of the above After you create your application categories, you can go to the desired cloud account and assign the vdc policies to the application categories. This assignment determines the boundaries of the infrastructure where the application can be provisioned. You can also use application categories to allocate clusters based on the type of application. For example, Cluster 1 is allocated for Web applications and Cluster 2 is allocated for database applications. When an application category is chosen by a user, Cisco UCS Director uses the vdc assignment to determine which location, within the boundary of the vdc, best meets the application's workload needs. For example, if the user chooses a CPU-intensive application category, Cisco UCS Director provisions the application in the available infrastructure with the least CPU utilization. Adding Application Categories By default, Cisco UCS Director provides the following application categories for you to use or edit: 8

9 Adding Application Categories Discovered VM Generic VM Web Server Application Server Database App CPU Intensive App Memory Intensive App Disk Intensive App Network Intensive Other App 1 Other App 2 Other App 3 Cisco UCS Director allows you to create application categories for multiple virtual data centers at a system level. This capability eliminates the repetitive task of selecting individual virtual data centers and assigning policies for categories. Choose the Application Categories tab. Click Add. In the Add Category dialog box, complete the following fields: Category Label field Category Code field Category field Category Enabled check box Default Smart Allocation Algorithm drop-down list A unique name for the category. Specify a code for the category. You can use this code in the VM or host name templates. A description of the category. Check this check box to enable the category. Enabling a category implies that you can select this category during VDC assignment. If you do not check this check box, then this category cannot be used in the system. Choose a default algorithm that must be applied during VM provisioning. 9

10 Customizing the Portal Step 6 Click OK. The application category is displayed when you click the Manage Categories option for a virtual data center. What to Do Next After you have created an application category, you can perform the following tasks: Edit or clone the application category Assign the application category to multiple virtual data centers. For more information, see Managing Application Categories in a Virtual Data Centers. Customizing the Portal Organizations can customize the End User Portal. The logo, login page, home page, and so on can be customized for branding and user interface-related changes. Customizing the Login Page and Background Images You can change the login page and background images by uploading custom images. On the menu bar, choose Administration > User Interface Settings. Click Login Page. Check the Use customizable Login page check box. In the Logo Images pane, click Add and complete the following fields: Field Image Label field field Select a file for upload field Upload option Submit option A name for the image. A description for the image that you upload. Click Browse to search and select an image file. Important An optimal image is 200 pixels in width and 100 pixels in height and is in the PNG format. Click this option to upload the image. This option is enabled only after you have browsed and selected an image. Click Submit after the image is uploaded. 10

11 Customizing the Application Logo In thebackground Images pane, choose an item or click Add and complete the following fields: Field Image Label field field Select a file for Upload field Upload option A name for the image. A description for the image that you upload. Click Browse to search and select an image file. Important An optimal image is 890 pixels in width, 470 pixels in height, and has 255 pixels of white space. In addition, the image must be in the PNG format. Click this option to upload the image. This option is enabled only after you have browsed and selected an image. Step 6 Customizing the Application Logo You can customize the application logo on the home page by uploading a custom image. On the menu bar, choose Administration > User Interface Settings. Choose the Application Logo tab. In the Images pane, click Add to add a new image that is not listed, and complete the following fields: Field Image Label field field Select a file for upload field Upload option A name for the image. A description for the image that you upload. Click Browse to search and select an image file. Important Supported image formats are PNG, JPG, and GIF. An optimal image size is 100 pixels in width and 50 pixels in height. Click this option to upload the image. This option is enabled only after you have browsed and selected an image. 11

12 Customizing Favicons Customizing Favicons You can customize a favorites icon (Favicon) that is displayed in the browser s address bar or next to the page name, if it is bookmarked. On the menu bar, choose Administration > User Interface Settings. Choose the Favicon tab. In the Image Label column, click Add to add a new image not listed and complete the following fields: Field Image Label field field Select a file for upload field Upload option A name for the image. A description for the image that you upload. Click Browse to search and select an image file. Important Supported image format is PNG. An optimal image size is 16x16 pixels. Click this option to upload the image. This option is enabled only after you have browsed and selected an image. Customizing Application Header You can customize the End User Portal labels, next to the customer logo, by modifying existing labels. On the menu bar, choose Administration > User Interface Settings. Choose the Application Header tab. In the Application Header pane, complete the following fields: 12

13 Customizing Application Header Hide Entire Header check box Product field Product 2nd Line field Enable About Dialog check box Check the check box to hide the header section. If checked, the header that contains the logo image, application name, and links, such as Logout, are hidden. The product name that must be displayed in the header. The second title of the product. Check the check box to enable the About link in the header. Uncheck the check box to disable the About link in the header. Administrator Portal Custom Link 1 Label field Custom Link 1 URL field Custom Link 2 Label field Custom Link 2 URL field The custom link label 1 for the administrator portal. The custom link URL 1 for the administrator portal. The custom link label 2 for the administrator portal. The custom link URL 2 for the administrator portal. End-user Portal Custom Link 1 Label field Custom Link 1 URL field Custom Link 2 Label field Custom Link 2 URL field The custom link label 1 for the end-user portal. The custom link URL 1 for the end-user portal. The custom link label 2 for the end-user portal. The custom link URL 2 for the end-user portal. Click Save. 13

14 Customizing Date Display Customizing Date Display Numerous data display formats are supported. On the menu bar, choose Administration > User Interface Settings. Choose the Date Display tab. Edit the date format. If required, click Hide Timezone to hide the time zone display from the user interface. Click Save. Customizing the Color Theme On the menu bar, choose Administration > User Interface Settings. Choose the Color Theme tab. From the drop-down list, choose from the available theme styles. Click Save. Customizing Logout Redirect On the menu bar, choose Administration > User Interface Settings. Choose the Login Redirect tab. Enter the URL. Click Save. Customizing Reports Report customization enables you to make a custom label or hide the available reports. 14

15 Enabling Advanced Controls Note You cannot customize or hide reports for users and groups. You can customize the report table on all other pages. You can customize only those reports that are identified as Tabular with actions. On the menu bar, choose Administration > User Interface Settings. Choose the Reports Customization tab. Choose a report. Click Edit. In the dialog box, complete the following fields: Hide Report check box New Label field Check the check box to hide the report. Uncheck the check box to show the report. A new label for the report, if required. Step 6 Click Save. Enabling Advanced Controls Choose the Advanced Controls tab. Complete the following steps: Performance Monitoring check box Resource Metering check box Event Monitoring check box Check the check box to enable virtual infrastructure monitoring, physical infrastructure monitoring, and external cloud monitoring. Check all additional check boxes under this category, as needed. Check the check box to enable monitoring of VM metering functions. Note If the VM metering function is disabled, chargeback does not work. Check the check box to enable virtual and physical infrastructure events. 15

16 Enabling the Service Provider Feature Auto Support check box Heat Map Report Computing check box Automatic Assessment check box Adaptive Provisioning Indexing check box Delete Inactive VMs Based on VDC Policy check box System Task Remoting check box Check the check box to enable automatic support. Check the check box to enable generation of heat map reports for the virtual infrastructure. Check the check box to generate reports on virtual assessment. Check the check box to enable and compute the load indices for hosts for various host parameters every 4 hours. These indices are used in adaptive provisioning of the catalogs. A lower index indicates a better chance for the host being chosen for provisioning. This process works according to the computing policy of a specific VDC. Check the check box to enable and delete the inactive (powered off) VMs under a VDC after a time that is specified by the administrator. The deletion of these inactive VMs is also based on the VM management policy defined by the administrator. Before an inactive VM is is deleted, an notification is sent to the user. This property is associated with the Delete after inactive VM days field in the VM management policy. Note By default, the property box is not checked. Check the check box to administratively enable the remote execution. Enabling the Service Provider Feature Choose the Service Provider Feature tab. Complete the following steps: 16

17 User Menus Enable Service Provider Feature (Requires System Restart) check box Organization (First Level) field Organization (Second Level) check box Check the check box to enable service providers in Cisco UCS Director. The name of the parent organization for which this feature should be enabled. The name of the child organization for which this feature should be enabled. User Menus You can enable customized menu operations for individual user roles. The menu settings that users can view and access in the application is dependent on the user roles that they have been assigned, and the menu operations that you set for the roles. Setting User Menus Choose the Menu Settings tab. From the drop-down list, choose a user role. Check or uncheck the menu check boxes to allow menus for that role, or check the Reset to Defaults check box. 17

18 Setting User Permissions Setting User Permissions Step 6 Choose the User Permissions tab. From the drop-down list, choose a user role. In the Allowed Operations dialog box, you can view the read and write operations for the chosen user role. Check or uncheck the check boxes to allow read and write operations for an individual role, or check the Reset to Defaults check box. System Tasks The System Tasks tab displays all the system tasks that are currently available in Cisco UCS Director. However, this list of system tasks is linked to the type of accounts that you have created in Cisco UCS Director. For example, if you have logged in for the first time, then only a set of general system-related tasks or VMware related tasks are visible on this page. When you add accounts, such as rack accounts or Cisco UCS Manager accounts, system tasks related to these accounts are populated on this page. Following are the tasks that you can complete from the System Tasks page: View the available systems tasks You can use the Expand and Collapse options to view all the system tasks that are available on this page. The tasks are categorized according to the accounts available in Cisco UCS Director. For example: Cisco UCS Tasks or NetApp Tasks. Disable and enable system tasks In circumstances when there are multiple processes or tasks running on the appliance, you can choose to disable a system task. If you do so, then until such time that you manually enable it, the system task will not run. This will affect the data populated in other reports. For example, if you disable an inventory collection system task, then reports that require this data may not display accurate data. In this case, you will have to manually run an inventory collection process, or enable the system task. For more information, see Disabling or Enabling a System Task, on page 22. In a single-node setup, where there is only one server, all system tasks will run on this server. In a multi-node setup, where there are multiple servers configured, all system tasks, by default, run on the primary server. However, you can specify system tasks to run on the secondary servers. Following are the recommended steps to perform this task: 1 Ensure that the secondary servers are available in Cisco UCS Director as nodes. If the servers are not available, then you must add the servers as nodes. For more information, see Creating a Service Node, on page Create a node pool from the available servers. For more information, see Creating a Node Pool, on page

19 Creating a Node Pool 3 Create a system task policy, and associate it with a node policy. For more information, see Creating a System Task Policy, on page Associate a node pool with the system task policy. For more information, see Assigning a Node Pool to a System Task Policy, on page Select a system task, and associate it with a system-task policy. For more information, see Assigning a System Policy to a System Task, on page 21. Creating a Node Pool Step 6 Step 7 Choose the Service Nodes tab. Click the Service Node Pools icon. The Service Node Pool dialog box displays. Click the + (plus) icon. The Add Entry to Service Node Pools dialog box displays. In the field, enter the node pool name. (Optional) In the field, enter a description of the node pool name. The node pool is created. Creating a System Task Policy As an administrator, you can choose to combine a few policies and create a system task policy, in addition to the default system task policy. You can group system tasks into a system task policy to later determine which system tasks are running on which node. Step 6 Step 7 Choose the System Task Policy tab. Click the Add icon. The Add dialog box displays. In the field, enter the name that you gave the system task policy. (Optional) In the field, enter a description of the system task policy. From the Node Pool drop-down list, choose the node pool to which this system task policy belongs. The selected node pool now belongs to the newly created system task policy. 19

20 Assigning a Node Pool to a System Task Policy Assigning a Node Pool to a System Task Policy Choose the System Task Policy tab. Select an existing system task policy from the column and click the Edit icon. The Edit dialog box displays. Note If the default system task policy is used, you can assign service nodes to this policy. See Creating a System Task Policy, on page 19, if you want to configure a policy that is different from the default. From the Node Pool drop-down list, choose a node pool to which this System Task Policy belongs. The selected node pool now belongs to the system task policy. Creating a Service Node Choose the Service Nodes tab. Click the Add (+) In the Service Node dialog box, complete the following fields: Node field The name of the service node. Role field Service Node Pool drop-down list DNS field field Protocol drop-down list Port field You cannot edit this field. By default, this field displays Service as the role of this node. By default, the default-service-node-pool is displayed. Enter either the DNS name or IP address of the service node. Note This field cannot use the Primary Node s IP address. Ensure that a valid Service Node DNS name or IP address is entered. The description of the of the service node. Choose either http (default) or https. The default TCP port for the Hypertext Transfer Protocol (HTTP) 80 is entered by default. Enter a different TCP port if necessary. 20

21 Assigning a System Policy to a System Task User field The infrauser user name is entered by default. The infrauser is a user account created by default. To find this user account on the menu bar, choose Administration > Users and Groups. Choose the Login Users tab to find the infrauser user account in the Login column. Note The InfraUser user name is not the default administrator user to login to the system. Another user name can be added to this field. This user s API key is used to authenticate with the Service Node. Assigning a System Policy to a System Task Step 6 Step 7 Choose the System Task tab. Choose a folder that contains system tasks. Click the folder arrow to expand its tasks. Note 128 system tasks are available. Choose the task and click the Manage Task icon. The Manage Task dialog box appears. From the Task Execution drop-down list, choose Enable. From the System Task Policy drop-down list, choose a system policy. The system task is assigned to the selected system policy. Executing System Tasks Cisco UCS Director includes a few system tasks that cannot be run remotely on a service node. Also, you can assign a system policy remotely from the local host or the primary node. 21

22 Disabling or Enabling a System Task In addition, you can search and select a specific system task, and run it immediately in the system. Choose the System Tasks tab. Choose a task from the list. Click Run Now. The result of the executed system task is updated in the user interface. Disabling or Enabling a System Task Step 6 Step 7 Choose the System Task tab. Choose a folder that contains one or more system tasks. Click the folder arrow to expand its tasks. Note 128 system tasks are available. Choose the task and click the Manage Task icon. The Manage Task dialog box appears. To disable a system task, from the Task Execution drop-down list, choose Disable. To enable a system task, from the Task Execution drop-down list, choose Enable. Managing Icons Cisco UCS Director supports customization and management of catalog icons. Each icon set contains many images. The images in each icon set correspond to the icons that are available in the catalog-creation form. The four prepopulated icon sets are as follows: Container Catalog Icon Set Catalog Folder Icon Set Advanced Catalog Icon Set Standard Catalog Icon Set 22

23 Adding an Icon Adding an Icon On the menu bar, choose Administration > User Interface Settings. Choose the Icon Management tab. Choose an icon set category. Click Icon Images. In the Manage Icon Images dialog box, click Add (+). Step 6 In the Add entry to Icon Images dialog box, complete the following fields: Image Label field field Select a file for Upload field The new label for the image. The label is used to populate the drop-down list for the icon during catalog creation. The description of the image. Click Browse to locate a file, and then click Upload. Step 7 Step 8 The image is listed in the Manage Icon Images dialog box. Click Close. What to Do Next You can select this icon when you are creating or modifying a catalog. 23

24 Editing an Icon Editing an Icon Step 6 Step 7 Step 8 Step 9 0 On the menu bar, choose Administration > User Interface Settings. Choose the Icon Management tab. Choose an icon category. Click Icon Images. In the Manage Icon Images window, choose an icon image to edit. Click Edit. In the Edit Icon Images Entry dialog box, edit the. Choose a replacement file to upload by clicking Browse and browsing to an image. Click Upload. Once the upload is finished, click Submit. Deleting an Icon On the menu bar, choose Administration > User Interface Settings. Choose the Icon Management tab. In the Manage Icon Images window, choose an icon image and click Delete icon. Click Delete (X). Previewing an Icon On the menu bar, choose Administration > User Interface Settings. Choose the Icon Management tab. Click Icon Images. In the Manage Icon Images window, choose an icon image to preview. Click the Information icon to preview the image. 24

25 Tag Library Tag Library Tagging is when you assign a label to an object. As an administrator, you can decide to tag objects such as resource groups and user groups, in Cisco UCS Director. You can assign tags to a category such as Compute, Storage, Network, and Virtual. You can also apply a tag to a specific type of account in the selected category. For information on how to apply and remove tags on resource groups, see the Managing Tags of a Resource Group section in the Cisco UCS Director APIC Management Guide. Once the tag is created, based on the defined applicability rules, the tags are filtered and displayed in an object report. You can associate the tag to an object such as resource group. To view the resource entities that are associated with a tag, choose the tag and click View Details. Alternatively, you can double click the tag. Note If resource entity is not associated with the tag, the table is empty. Creating a Tag You can use the Create icon in the Tag Library tab to create a tag that can be assigned to one or more objects in report page. On the menu bar, choose Policies > Tag Library. In the Tag Library tab, click Create. In the Create Tag dialog box, complete the following fields: field field Type drop-down list Possible Tag Values field The name for the tag. The description of the tag. Choose INTEGER or STRING as the type of the tag. The possible values for the tag. Click Next. In the Applicability Rules screen, complete the following fields: Visible to End User field Check this check box to make the tag visible to end user. 25

26 Support Information Taggable Entities field Choose the entities on which the tag need to be applied. To add an entity, do the following: 1 Click the + icon. 2 From the Category drop-down list, choose the category. It can be one of the following: Virtual_Compute Virtual_Storage Virtual_Network Physical_Compute Physical_Storage Physical_Network Administration 3 Choose the taggable entities. 4 Note The tags are displayed under the respective category according to the set taggable entities. Step 6 What to Do Next After creating a tag, you can edit, clone and delete it by selecting the respective option in the user interface. Support Information Cisco UCS Director support provides basic and advanced system information, including the license status, database tables, version, resource usage, logs, and debugging processes for troubleshooting. The Support Information page lets you perform the following actions: View system information (Basic) View system information (Advanced) Show logs Download all logs Start and stop debug logging 26

27 Viewing System Information Start and stop API logging Viewing System Information Cisco UCS Director allows you to access system information from the user interface. You can access the following types of system information: Basic system information Advanced system information Basic system information includes the following: Software version Uptime Service status System license status System usage Compute accounts status Compute server status Storage account status System catalogs Network device status and Cloud status The advanced system information includes the following: Basic system information Database tables summary Product configuration Top process information Information on processors, memory, disks, log files, network, and login System task status Cloud inventory Monitoring status On the menu bar, choose Administration > Support Information. From the System Information drop-down list, choose the type of system information you want to view. 27

28 Showing Logs The System Information page opens in a new tab and displays information about the Cisco UCS Director appliance. Showing Logs Cisco UCS Director collates the following logs in the system: Infra Manager Web Context Cloud Manger Tomcat Log Authenticator Log Mail Delivery Log Patch Log On the menu bar, choose Administration > Support Information. From the System Information drop-down list, choose Show Log. From the Show Log drop-down list, choose the log file that you want to view. The log file opens in a new tab or browser window and displays any available information, warning, and error logs. Downloading Logs You can download all the log files as a zipped file. On the menu bar, choose Administration > Support Information. From the System Information drop-down list, choose Download All Logs. Click Download. 28

29 Starting the Debug Log Starting the Debug Log Debug logging enables you to record a maximum of 30 minutes debug logging to a log file. On the menu bar, choose Administration > Support Information. From the System Information drop-down list, choose Debug Logging. Click Start Debug Logging. Click Stop Debug Logging to stop the recording. The recording will automatically stop once it reaches the 30 minute limit. Click Download Debug Logs from HH.MM.SS (time) to download the zipped log file. Generating API Logs Step 6 On the menu bar, choose Administration > Support Information. From the System Information drop-down list, choose API Logging. Click Start API Logging. Perform any tests that you want to run. Click Stop API Logging to stop the recording. Click Download API Debug Logs from HH.MM.SS (time) to download the zipped file. A compressed (zip) file is generated and downloaded on to your desktop. This zipped file contains a text file that lists all the REST APIs that invoked on the appliance, along with the timestamp. Database Audit Logging Database audit logging lets the system record information on login events and query events. These events are logged in the /var/lib/mysql/data/audit.log file. By default, database audit logging is disabled. To enable database audit logging, use the dbauditlog.sh command. For more information, see Enabling Audit Logging, on page 30. Note You can disable database audit logging if the system encounters performance issues due to a heavy audit log output. 29

30 Enabling Audit Logging Enabling Audit Logging Login as root on the Cisco UCS Director appliance directly or by using an SSH client. Run the following commands to stop all services running on the system. infra]# pwd /opt/infra infra]#./stopinfraall.sh infra]#./statusinfra.sh Run the following command to enable audit logging. infra]# cd bin bin]# pwd /opt/infra/bin bin]#./dbauditlog.sh ON Run the following commands to restart the services: infra]# pwd /opt/infra/bin infra]#./startinfraall.sh Run the following command to check the status of audit logging. bin]#./dbauditlog.sh STATUS audit-log= ON If you see a message that states that there is an issue with the database startup, you must remove or rename the audit.log file and restart the Cisco UCS Director database server. 30