Notebook PC User s Manual

Transcription

1 Notebook PC User s Manual T

2 BIOS BIOS 2

3

4 (0 30 ) ( ) 4

5 pre-load Fn+F7 5

6 ( " " - ASUS ) * / / * * * / ( L8480PDV-B26MC IIIIIIIIIIIIIIIIIIIIIIIII K XXNPXXXXXX " " ( ) ( ) ( ) LCD ( ) LCD !!! 6

7 Ai-Box Ai-Box USB /

8 LED DVD DVD PC & Windows XP

9 (TV-Out) USB USB

10 ACPI BIOS BIOS Main Advanced Security Power Boot Exit

11

12 CD

13 TV (RJ-45) (RJ-11) 3 VGA 4 / Ai-Box PS/2 USB 8 (TV-out) 9 13

14 A A Internet S1 S2 14

15 1 2 3 H H 5 L 1 L 2 H Reset

16 1-1 1 DCIN K PC USB

17 IEEE

18 SO-DIMM (128/256/512MB) Ai-Box USB Ai-Flash USB USB / Ai-Box Ai-Box DVD-ROM CD-RW&DVD-ROM CD-ROM CD-ROM CD-RW Box Ai- CD/VCD/CD-ROM DVD-ROM 140ms(DVD) 100ms(DVD) DVD/ PhotoCD CD-Extra CD-R CD-RW PIO Mode-4 ATAPI 16.7MByte/s 18

19 19

20 1-2 Ai-Box F2 BIOS BIOS F9 BIOS Load setup Default BIOS BIOS BIOS Main Primary Master Secondary Master 20

21 K USB USB USB USB USB USB DCIN 1) 2) 21

22 / / / /

23 1-3 LCD 23

24 1-3 24

25 1-4 dows W i n - Hiberna-tion Hibernation (LAN) Outlook [ ] [ ] ( ) + 25

26 CTR21 18 FCC JATE( )

27 1-5 Security POST BIOS BIOS Security BIOS 27

28 28

29 LED

30 ) 2) 3) 4) 1 [ ] 30

31 ) Hibernation 31

32 K V 240V DCIN 32

33 Self Test CPU POST <tab> BIOS Power On POST POST POST Basic Input/Output System BIOS BIOS BIOS POST <F2> BIOS POST S.M.A.R.T. POST POST Operating system not found 33

34 Recovery CD <Del> <Ctrl>+<Alt>+ Reset H H Reset 34

35 2-5 (Recovery CD) (Recovery CD) Windows XP "CD-ROM" BIOS <ESC> 1.MS-DOS with CD-ROM Support ( DOS ) 2.Recover Windows XP Professional to first partition only ( Windows XP ) 3.Recover Windows XP Professional to entire HD Windows XP ) 4.Recover Windows XP Professional to entire HD with 2 partition ( Windows XP 40% ) 60% 35

36 2-5 < ENTER > 2 Recover Windows XP Professional to first partition only "A" "C" "A" "Y" "N" "Cancel" "Y" "N" "Y" 2 Error #1833 One(and only one) partition must be selected "OK" "Cancel" Windows XP 36

37 2-6 LED / LED 1 A / / 1 + A 37

38 38

39 PC & 3-10

40 / CPU WindowsXP Microsoft Internet 40

41 3-2 LCD TFT(Thin-Film-Transistor) ) XGA 1024x768 ( LCD OSD On Screen Display

42

43 Windows 3. 43

44 ( ) Windows TM Windows TM Windows TM 44

45 Windows TM Windows TM Windows TM Windows TM Windows TM TV-Out 6. + ( Windows ) 7. + ( Windows ) 8. + ( Windows ) 9. + [ ]

46 [Shift]+ 46

47 Internet 3. S1 4. S ( Windows ) + ( Windows ) + ( Windows ) + [ ] + 47

48 48

49

50 3-5 50

51 51

52 3-5 / / / / / / / / / 52

53 CD CD-ROM/DVD-ROM/CD-RW/DVD&CD- RW CD CD CD Windows [ ] [Windows Media Player] / ( Windows XP ) / / ( Windows ) 53

54 3-5 DVD DVD DVD DVD Digital Versatile Disk MPEG II 22.16MBps DVD Video CD DVD DVD 4.7GB DVD DVD DVD DVD DVD DVD

55 INSERT THIS END PC ISP LAN PC 3-6 PC 68 pin 85.6mmx54.0mm( ) Type PC PCMCIA CardBus PC Windows plug and play hot-plug PC 32 CardBus CardBus MHz burst mode PCI 132 Mb 16 PC 20Mb CardBus 16 PC PC PC PC PC 68 55

56 3-6 PC PC PC PC PC PC Windows PC [ ] PC 56

57 PC PC 57

58

59 3-8 USB Universal Serial Bus USB USB USB U S B 127 USB USB USB USB USB U S B Windows ME/2000/XP USB 3-9 & PC98 PC99 Windows ME/2000/XP APM ACPI FCC JATE( ) CTR

60 TV TV 3-9 & RJ-11 RJ-45 60

61 3-10 IR port IrDA 1.1 FIR 4Mbps IrDA Windows XP Windows XP Windows XP BIOS ( )

62 L1 T94 L1 2 1 T94 T94 T txt 5 T94 L1 4 T94 5 L1 6 7 T94 6 L txt ( 7) 62

63 TV-Out 4-7 USB

64 TV Intel 830M VCD/DVD + 15pin D + 64

65 Intel 830M/MG Windows Intel Dual Display Clone + 65

66 D CD 66

67 TV TV 4-3 Windows 19mm PS/2 USB PS/2 USB 67

68 TV / 25Pin / 36Pin Centronics Windows 68

69 IEEE 1394 ( USB 400Mb/Sec) IEEE IEEE DV VHS DVD IEEE 1394 CD-RW MO Pin 6-Pin( ) 4-Pin 4-Pin 6-Pin 6-Pin

70 TV 4-6 (TV-Out) 4-6 (TV-Out) Intel 830M S-Video + VCD/DVD S-Video 4-2 S-Video RCA RCA- S- Video + S-Video 70

71 4-7 USB 2MB 1 USB USB ASUS USB data Transfer Cable 2 USB 3 1. PCMCIA LL5 4. USB USB 4 USB USB USB USB USB 5 USB USB USB

72 4-7 USB 3 USB USB 8 USB USB USB 9 Windows 6 7 USB 3.5 Setup Next 10 Next 11 Next 12 Next Finish USB USB

73 USB Transfer 14 Windows USB Data Transfer USB Data OK 14 OK Windows USB Data Transfer USB Data Transfer 15 OK USB Data Transfer

74 4-8 USB 4-8 K MB 256MB Windows 144 pin SO-DIMM 64MB 128MB 256MB 512MB 74

75 ACPI

76 DC AC (A) (B) (C) (D) (E) (F) (A)(C)(E) (A) (D)(F) (A)(C)(D)(E)(F) (A)(C)(E) (C)(D) (B)(C)(D) (B)(C) (E) (E) (A) (A) (A) (A) (A) (D) (D) (C) (A)(C) (C) (C) (C) (C) (C) (C) (A)(C) 76

77 5-2 Windows Windows [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] 77

78 Windows Windows 78

79 Start Battery Refreshing BIOS PC PC PC

80 Windows XP [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] Windows XP / / Battery Life / /

81 / / WindowsXP 81

82 5-3 ( ) [ ] [ ] + 82

83

84 5-5 ACPI 5-5 ACPI ACPI Advanced Configuration and Power Interface ACPI ACPI Intel Microsoft Toshiba WindowsME/2000/XP ACPI ACPI ACPI ACPI ACPI ACPI 84

85 BIOS Main 6-6 Advanced 6-7 Security 6-8 Power 6-9 Boot 6-10 Exit

86 BIOS Basic Input / Output System BIOS BIOS BIOS B I O S BIOS BIOS BIOS BIOS 6-2 BIOS BIOS BIOS BIOS BIOS BIOS F2 POST F2 BIOS BIOS 86

87 BIOS 6-3 BIOS System Time [17:15:00] System Date [02/01/2002] Primary Master [IC25N030ATDA04-0] Primary Slave [ASUS SCD-2400] Secondary Master [Auto] Secondary Slave [Auto] Item Specific Help <Enter> to select field; <+>,<-> to change value. Video Display Device Installed Memory [LCD & CRT] 128 MB F1 Alt+H 87

88 BIOS F1 Alt+H Esc Alt+X Exit Enter Tab Shift+Tab - + Home End F9 F10 PgUp PgDn Tab BIOS ESC Enter F9 BIOS BIOS BIOS BIOS 88

89 BIOS 6-5 Main BIOS System Time [17:15:00] System Date [02/01/2002] Primary Master [IC25N030ATDA04-0] Primary Slave [ASUS SCD-2400] Secondary Master [Auto] Secondary Slave [Auto] Item Specific Help <Enter> to select field; <+>,<-> to change value. Video Display Device Installed Memory [LCD & CRT] 128 MB System Time Tab Tab + Shift System Date Tab Tab + Shift Secondary Master Primary Master Primary Slave Secondary Slave 89

90 6-5 Main Primary Master IDE Enter Primary Master [IC25N030ATDA04-0] Item Specific Help Type: [Auto] Cylinders [ 1024] Heads [255] Sectors [63] CHS Capacity 8422MB Maximum LBA Capacity 30005MB Multi-Sector Transfers [Maximum] SMART Monitoring [Disabled] PIO Mode [4] Ultra DMA Mode [5] <Enter> to select the type of the IDE drive. [User Type HDD] allows you to set each entry on your own. WARNING: Ultra DMA mode 3/4/5 can be enabled only when BIOS detects shielded 80-pin cable. Type ROM Auto User Type HDD None CD- Auto IDE Auto None Translation Method User I D E Type User Type HDD [LBA] Translation Method [LBA] [Large] [Nomal] [Mach Partition Table] [Manual] Cylinders 90 Type User Type HDD Translation Method Manual Cylinders Heads Sectors Cylinder

91 BIOS Head Head Sector Sector CHS Capacity BIOS CHS Maximum LBA Capacity LBA Multi-Sector Transfers Type User [Maximum] Multi-Sector Transfers [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16 Sectors] [32 Sectors] SMART Monitoring S.M.A.R.T. Self Monitoring Analysis Reporting Technology [Disable] Smart Monitoring Smart Monitoring [Enabled] [Disable] PIO Mode PIO IDE Type User Type HDD [4] PIO Mode [0] [1] [2] [3] [4] Ultra DMA Mode Type User Type HDD [5] Ultra DMA Mode [0] [1] [2] [3] [4] [5] 91

92 6-5 Main Primary Slave IDE Enter Primary Slave Secondary Master Secondary Slave Auto User Type HDD CD-ROM None Primary Master Primary Master Primary Slave [ASUS SCD-2400] Item Specific Help Type [Auto] PIO Mode [4] ULTRA DMA Mode [2] <Enter> to select the type of the IDE drive. [User Type HDD] allows you to set each entry on your own. Main Video Display Device CRT [LCD & CRT] Video Display Type [LCD & CRT] [LCD] [CRT] Installed Memory 92

93 BIOS 6-6 Advanced (Advanced) I/O Device Configuration Internal Pointing Device [Enabled] Quick Power On Self Test [Enabled] Item Specific Help <Enter> to go to the sub-menu. I/O Device Configuration Enter I/O Device Configuration Item Specific Help IR Port [2F8H/IRQ3] Mode [FIR] DMA Channel [1] Parallel Port [378H/IRQ7] Mode [ECP+EPP] ECP DMA Select [3] <Enter> to select the I/O Address & IRQ for Infrared. 93

94 6-6 Advanced I/O Device Configuration IR Port IR Infrared [2F8H/IRQ3] [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ3] [Disabled] Mode IR Port [FIR] Mode [SIR] [FIR] DMA Channel IR Port [1] DMA Channel [1] [3] Parallel Port [378H/IRQ7] [278H/IRQ5] Mode Parallel Port [Disabled] [378H/IRQ7] Parallel Port [ECP+EPP] Mode [Normal] [EPP] [ECP] [ECP+EPP] ECP DMA Select Parallel Port [3] ECP DMA Select [1] [3] I/O Device Configuration Esc Internal Pointing Device [Disabled] [Enabled] [Enabled] 94

95 BIOS Quick Power On self Test [Disabled] Quick Power On self Test [Enabled] [Enabled] 95

96 6-7 Security 6-7 Security Security BIOS System Password Password on boot Hard disk Password [Enter] [Disabled] [Enter] Item Specific Help Supervisor password controls full access. <Enter> to change password ; <Enter> again to disable password. System Password Enter Enter Password 6-3 Confirm Password Enter Enter Set 8 Enter 96

97 BIOS Password on Boot Disable System Password Disable Enable 5 Hard disk Password Enter confirm Hdd Password 97

98 6-8 Power 6-8 Power LCD auto Power Saving Start Battery Refreshing [Enabled] Item Specific Help <Enter> to select the Power Saving Mode. You can select User Define to go to the Suspend Mode entry below. LCD auto Power saving LCD [Disabled] [Enabled] [Disabled] 98

99 BIOS Start Battery Refreshing Battery refresh utility This will recalibrate the battery gauge Please be sure you have AC adapter inserted Battery internal registersre-initialized Please wait while the batteryis charging... Please Remove AC adapter and wait the machine shut down. Please leave the machine on until it shutdown. 99

100 6-9 Boot 6-9 Boot Boot 1. Removable Device [USB Floppy] 2. IDE Hard Drive [IC25N030ATDA04-0] 3. ATAPI CD-ROM [ASUS SCD-2400] 4. Other Boot Device [INT18 Device (Network)] Onboard LAN Boot ROM [Disabled] Item Specific Help Boot Sequence: <Enter> to select the device. To select the boot sequence, use the up or down arrow. Press <+> to move the device up the list, or <-> to move it down the list. 1.Removable Device 2.IDE Hard Drive 3.ATAPI CD-ROM 4.Other Boot Devices Onboard LAN Boot ROM [Enabled] 4.Other Boot Devices 100

101 BIOS 6-10 Exit BIOS BIOS Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Item Specific Help Exit setup utility and save your changes to CMOS. Exit Saving Changes BIOS CMOS Enter Yes CMOS BIOS No BIOS Exit Discarding Changes BIOS Enter

102 6-10 Exit 6-5 No Yes BIOS BIOS Load Setup Defaults Enter Yes No BIOS BIOS Discard Changes BIOS Enter Yes BIOS CMOS BIOS No BIOS Save Changes 6-8 Enter 6-8 Yes CMOS BIOS No BIOS 102

103 7-1

104 AQ? A AQ A 1 4 ~ 6 2 (Reset) 1 2 LCD LCD AQ A 3 1 ASUS F2 BIOS 2 Power 3 Start Battery Refreshing ASUSTek Battery refresh utility This will recalibrate the battery gauge Please be sure you have AC adapter inserted Battery internal registers re-initialized Please wait while the battery is charging... 4 Please Remove AC adapter and wait the machine shut down. < > Please leave the machine on until it shut down. < > 5 < > 104

105 AQ A AQ ( ) A Stand By RAM Hibernate 1 2 USB (Compact Flash MMC Smart Media) ( ) 3.dll.sys.exe Win98 WinXP 4 ACPI (Advanced Configuration and Power Interface) 105

106 7-1 AQ A BIOS LCD 2 3 PC? AQ 4 LCD? A LCD LCD / ( ) 106