B-Smart-Lock Combipad. B-Smart-Lock Combipad RTC COMBIPAD. Operating manual.

Size: px

Start display at page:

Download "B-Smart-Lock Combipad. B-Smart-Lock Combipad RTC COMBIPAD. Operating manual."

Madeline Bradley
5 years ago
Views:

1 B-Smart-Lock Combipad B-Smart-Lock Combipad RTC GB Operating manual

B-Smart-Lock Combipad RTC A B C D Introduction Dear Customer, Thank you for choosing the B-Smart-Lock Combipad - the electronic lock for locker and furniture.

2 B-Smart-Lock Combipad RTC A B C D Introduction Dear Customer, Thank you for choosing the B-Smart-Lock Combipad - the electronic lock for locker and furniture. This lock is particulary robust and of high qualitiy. It acts as an organisational closure of closets, cabinets and compartments and allows convenient management of a large number of users. Important: please note all warnings and read through the entire operating manual before you begin configuration. We hope you enjoy using your new system. Sincerely, BURG F. W. Lüling KG A Latchbolt General B Rotary knob C Keypad The latest version of this guide is always available on our website: D Emergency power supply aperture Default settings Contents Introduction 2 General 2 Default settings 2 Important information 3 Technical specifications 3 Functional description 3 Timed functions 4 Configuration 4 Installation 5 General code Customer-specific 1 Mode Master code PIN length 4 Locking LED locking indicator Code reenter Freely selectable PIN Manual On Off 1 When ordering, please give us your choice of a 9-digit code. The code can no longer be changed after we have set it for you. 2 For your own security, program your own master code on the lock prior to use. You can also give us your desired code when ordering so we can configure it for you during production. The master code can be changed by authorised persons at any time. Battery replacement 5 Disposal 5 B-Smart-Lock Combipad RTC March AN/ DSW English 2

3 Important information Each step of the configuration is confirmed as completed with a double flash of the LED. It is absolutely imperativ to only begin the next step of the configuration after this flashing signal. If you switch from one mode to the other (Freely selectable PIN Fixed assigned PIN; Fixed assigned PIN Freely selectable PIN), all other functions are reset to the factory settings. Caution: this does not apply to the master code and the general code. If the configuration step is completed incorrectly, the lock signals this with 8 consecutive flashes of the LED. Caution: the lock is disabled for 45 seconds after 3 wrong inputs. A red flash every second indicates that the lock is currently disabled. This disablement can be terminated early by entering the master code. Functional description Master code The master code starts off any programming process and can re-enable a lock any time. In Freely selectable PIN mode, the PIN used to close is deleted once the master code has been entered. The mastercode must always be entered as follows: 1 master code e. g Freely selectable PIN mode In this mode, the user can enter any PIN. The user must first close the door. The user then enters a PIN of their choice and engages the lock. The PIN entered is valid until the lock is opened with the same PIN. Fixed assigned PIN mode In this mode, the PIN is stored in the lock. The lock only engages or disengages when the stored PIN is entered. Up to 50 PINs can be stored simultaneously. Each stored PIN can open the lock, even if it has been locked with a different PIN. Technical specifications Dimensions Battery Permissible temperature No. of possible codes 999,999 Code length Programming Material Locking direction Lock attachment Latch 96 x 64 x 23 mm 3V lithium battery, CR123A Service life: over 45,000 locking cycles 0 40 C (no formation of condensation) 4 or 6 digits Freely selectable PIN Fixed assigned PIN Zamac L, R, LAD Mounting plate Latch bolt (nickel-plated) LED-locking status indicator A red flash every second in the locking indicator indicates that the lock is engaged. When open, the LED does not flash. This function is optional and can be turned on or off as desired. Automatic locking Automatic locking can only be activated in fixed assigned PIN mode. When automatic locking is activated and a lock is opened with a PIN, the lock automatically engages again after 3 seconds. The trap function still enables the door to be closed, although the knob can no longer be turned. Code reenter The verification code can only be used in freely-selectable PIN mode. If a PIN is entered to engage the lock, it must be input again when the green LED flashes for a short time to confirm. Only then does the lock actually engage. Simply enter the code again to open. Battery warning The low battery warning is given in two stages. If the battery capacity drops below the first level, the LED lights up red for three seconds after a PIN is entered. If the capacity falls to a critical level, the lock cannot be engaged at all and can only opened with the master code. Note: we recommend replaing the batteries as soon as the red LED gives its first warning. If warnings are not heeded and the batteries are completely drained, the lock can only be opened using a emergency power supply. The emergency powe supply pack is available from us. B-Smart-Lock Combipad RTC March AN/ DSW English 3

4 General code If the general code is entered, a lock opens no matter with which PIN it has been locked. In addition, the lock is returned to its factory settings. The general code does not require any previous master code input. Der general code must always be entered as follows: 4 general code 3. Functions settings for the selected mode Now adjust any of the functions assigned to your chosen mode that you need. a) Configuration in Fixed assigned PIN mode Assigning the PIN Timed functions 1 Enter the master code Assign PIN Up to 50 PINs can be stored. 3 xxxx (xx) Automatic locking and unlocking The lock automatically locks or unlocks a certain time. Different times can be set for each day of the week. Usage time window The usage time window defines the period during which a lock may be closed. If a lock is still closed beyond the end of the usage time window, it can still be opened. Different periods can be set for each day of the week. Locking duration The duration of the locking period determines how long a lock will remain closed after locking before it unlocks automatically. The duration can be set differently for each day of the week. 1 You provide details for these functions to us during the order process and BURG programs them for you. Configuration 1. Mode selection First, decide whether you want to use Fixed assigned PIN mode or Freely selectable PIN mode. a) Fixed assigned PIN mode Select mode b) Freely selectable PIN mode Select mode 2. Setting the PIN length Delete PIN Delete PIN 9 xxxx (xx) Activate/ deactivate automatic locking Activate Deactivate b) Configuration in Freely selectable PIN mode Activate/ deactivate the code reenter Activate Deactivate 4. General function settings You can then set the general functions according to your requirements, regardless of the selected mode. Set your own master code Enter the old master code Enter the new master code The master code must be 6 digits long. 5. Restoring the settings To restore to the factory settings: Enter the general code 7 xxx xxx 4 general code Set the PIN length. The PIN length is 4 digits under factory settings. Enter the master code Specified the required number of digits 0 x (x = 4 or x = 6) Caution: If the number of digits is changed, all PINs currently stored are deleted. B-Smart-Lock Combipad RTC March AN/ DSW English 4

Installation Battery replacement 1. First, place the frame of the lock on the inside of the door around the mounting hole. 1. Loosen the screw on the back. 2. Remove the protective plate. 3.

Insert the lock from the outside of the door into the mounting hole at an angle, so that the bolt is located behind the mounting surface.

Disposal Electrical equipment may not be disposed of with houshold waste! At the end of its useful life, please take the equipment to a designated collection point.

relevant regulations and obligations concerning battery legislation: Used batteries should not be put in household waste.

You can also send your used batteries back to us. Postage must always be fully prepaid on batteries/ rechargeable batteries returned to us for disposal: 4. The screws should be tightened by hand (max.

5 Installation Battery replacement 1. First, place the frame of the lock on the inside of the door around the mounting hole. 1. Loosen the screw on the back. 2. Remove the protective plate. 3. Remove the batteries. 4. Insert the new batteries (with both poles facing upwards) 2. Insert the lock from the outside of the door into the mounting hole at an angle, so that the bolt is located behind the mounting surface. Caution: Batteries must be changed within 3 minutes, otherwise the time settings will be lost. 3. Press the lock against the door from the outside and fasten the frame by screwing the enclosed screws into the holes provided for it. Disposal Electrical equipment may not be disposed of with houshold waste! At the end of its useful life, please take the equipment to a designated collection point. As a company selling batteries or rechargeable batteries, or devices which are operated with batteries or rechargeable batteries, we are obliged to provide the following information about the relevant regulations and obligations concerning battery legislation: Used batteries should not be put in household waste. Consumers are legally obliged to bring batteries back to a suitable collection point eihter at a retailer or the municipality for disposal. You will not be charged for disposal. You can also send your used batteries back to us. Postage must always be fully prepaid on batteries/ rechargeable batteries returned to us for disposal: 4. The screws should be tightened by hand (max. 2 Nm). BURG F.W. Lüling KG Volmarsteiner Straße Wetter (Ruhr) Used batteries may contain contaminants or heavy metals that can be harmful to the environment and health. Furthermore, batteries contain valuable materials which can be recycled. The environment and PCE Deutschland GmbH thank you. The waste bin sign means: Batteries and rechargeable batteries must not be disposed of in household waste. The signs below the waste bin stand for: Pb: Battery contains lead Cd: Battery contains cadmium Hg: Battery contains mercury BURG F. W. Lüling KG Hegestraße Wetter (Germany) Fon + 49 (0) / Fax + 49 (0) / info@burg.de B-Smart-Lock Combipad RTC March AN/ DSW English 5

B-Smart-Lock Combipad

B-Smart-Lock Combipad G Operating manual www.burg.de Introduction ear ustomer, Thank you for choosing the - the electronic lock for locker and furniture. This lock is particulary robust and of high qualitiy. It acts as an organisational