TALON Commissioner Revision 3.15, Service Release Pack 2 Release Notes

Transcription

1 TALON Commissioner Revision 3.15, Service Release Pack 2 Release Notes A6V Building Technologies

2 Table of Contents Cyber security disclaimer... 5 Introduction... 6 What this Document Covers... 6 Section 1 - New Features and Enhancements... 7 Point Details... 7 Point Usage Report... 7 Program Editor... 7 System Activity Log... 7 System Profile... 8 TEC applications... 8 Alarm Issue Management (AIM)... 9 Main Menu... 9 General Enhancements... 9 Terminal Box Controller (TBC) Test... 9 Section 2 - Fixed Issues Alarm Status Communication Monitor Database Transfer Daylight Saving Time (DST) Graphics Insight Async Service Point Editor Point Transfer Program Editor Scheduler System Activity Log System Profile Terminal Box Controller (TBC) Startup and Commissioning Tool Trend Definition Editor Pre-Install Tools Section 3 Installation Section Installing a Service Pack Release Section 4 - System Requirements Section 5 - Service Pack Releases Revision 3.15, Service Pack Release General Enhancements System Profile

3 PPCL Debugger Fixed Issues

4

5 Copyright Notice Copyright Notice Notice Document information is subject to change without notice by Siemens Industry, Inc. Companies, names, and various data used in examples are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Siemens Industry, Inc. All software described in this document is furnished under a license agreement and may be used or copied only in accordance with license terms. For further information, contact your nearest Siemens Solution Partner, Authorized TALON Dealer. Copyright 2017 Siemens Industry, Inc. To the Reader Your feedback is important to us. If you have comments about this manual, please submit them to: SBT_technical.editor.us.sbt@siemens.com Credits TALON is a registered trademark of Siemens Industry, Inc. Other product or company names mentioned herein may be the trademarks of their respective owners. Printed in the USA. Cyber security disclaimer Products, solutions and services from Siemens include security functions to ensure the secure operation of building automation and control, fire safety, security management, and physical security systems. The security functions on these products, solutions and services are important components of a comprehensive security concept. Drafting, implementing and managing a comprehensive and up-to-date security concept, customized to individual needs, is nevertheless necessary, and may result in additional plant- or site-specific preventive measures to ensure secure operation of your site regarding building automation and control, fire safety, security management, and physical security. These measures may include, for example, separating networks, physically protecting system components, user training, multi-level defensive measures, etc. For additional information on security as part of building technology and our product, solution and service offerings, please contact your Siemens sales representative or project department. We strongly recommend to always comply with our security advisories on the latest security threats, patches and other related measures

6 Introduction What this Document Covers Introduction The electronic version of the Release Notes, available in PDF format with the installation media and from the Online Documentation toolbar, contains up-to-date information and supersedes any printed version of this manual. What this Document Covers These Release Notes include the following sections: Section 1 - New Features and Enhancements provides information about new features introduced in this revision of the product, along with the significant enhancements to the product. Section 2 - Fixed Issues lists all the issues that have been fixed in this revision. Section 3 - Installation describes the procedure required to install the product or upgrade to this revision of the product if you already have a previous version. Section 4 System Requirements provides the system requirements for this product to function fully without any issues. Section 5 Service Pack Releases describes information of features and fixes included in the product. End User License Agreement 6 24

7 Section 1 - New Features and Enhancements Point Details Section 1 - New Features and Enhancements This section describes new features, system enhancements, and information about resolved defects delivered with this revision. For detailed information on any of the new features and enhancements, please see the online help system. Point Details The Point Details application now includes a Refresh button, which updates the point properties, such as Value, Totalization, Priority, and Status, for the point currently displayed. You no longer need to reopen the point in Point Details in order to update the point. Point Usage Report The Point Usage report has been enhanced to also search BACnet Schedules, BACnet Command Objects, and Graphics. When you select BACnet Schedules and BACnet Command Objects, the options Search at the Database or Search at the Field Panels are available. When Graphics is selected, the only option is Search at the Database. Program Editor New PDL Wizard The Program Editor now provides a PDL Wizard, which guides you through the process of creating a basic peak demand limiting (PDL) strategy. Prior to Insight Revision 3.15, you had to either manually configure several PDL-related statements or use the PPCL assist features in order to define the meters, loads, and intervals. Now, once you provide the required information for configuring your PDL strategy, the PDL Wizard creates the PPCL statements in the proper order and inserts them into your program. PPCL Line Number Displays if an Error Occurs During a Download Operation Previously, when a Download operation failed, the PPCL line number was not available in the Result Pane. PPCL has been enhanced to display the line number where an error has occurred so that you can easily locate the problem and take corrective actions. System Activity Log You can now select and copy text in the System Activity Log and paste it in any Insight application, such as PPCL or Point Editor, or other applications, such as Excel or Notepad. This eliminates the errors that might occur when transcribing content from the System Activity Log. The following options are now available in the System Activity Log when you right-click on a line: Copy entire line Copy system name only Copy user name only 7 24

8 Section 1 - New Features and Enhancements System Profile Copy action only Copy comments only System Profile Siemens BACnet Field Panels that are configured as a BACnet Broadcast Management Device (BBMD), can now be easily identified in the System Profile tree. The text [BBMD] now displays at the end of each BACnet field panel identification information that are BBMDs. You can now search for Siemens BACnet Field Panels that are configured as a BBMD by entering the text BBMD in the Search field in the System Profile toolbar. The system will locate and highlight the first BBMD below the object currently selected, such as a workstation or an ALN. To find the next BBMD in the System Profile tree, click the Find Next icon. A set of default BACnet Notification Classes are now provided, which allows you to quickly edit Notification Classes to field panels using predefined criteria. Other enhancements are: Customize default Notification Classes and save as user defined for reuse in the future. Add Notification Classes to any field panel. Retain defined Notification Classes to re-use after un-installing the software. A new feature supports the importing of TSAL applications, points and PPCL from the TSAL libraries. This is launched from the Tools menu for any field panel. Features include: Rename point names during import process. Display data fields for viewing and editing point names, description, point type and signal type (for analog points) when importing from TSAL. Search and replace functionality which allows you to quickly rename multiple points at one time. Integrated version of TSAL for points and PPCL only. The BACnet Field Panel Definition dialog box now allows Event Enrollment editing even if the Firmware Revision string is blank. This allows you to do offline editing without first connecting to a field panel. TEC applications All the latest TEC applications have been added. These are now available in the TEC Import Application dialog box in the System Profile application. TEC Graphics have been added for all 663x applications. Commissioning Report Generator has been updated to support ATEC 663x and BACnet Lab 67xx applications. The Buffalo Grove TEC Applications utility is now available with TALON Commissioner. This allows you to import an application from the Buffalo Grove network to the local TEC database. The imported applications are then available in the Auto Unbundling dialog box of the Import Application in System Profile. 8 24

9 Section 1 - New Features and Enhancements Alarm Issue Management (AIM) Alarm Issue Management (AIM) Event Enrollment objects were previously not supported in Alarm Issue Management (AIM). Event Enrollment objects that were enabled for AIM did not display in the AIM window. AIM, AIM History, and AIM Report have been enhanced to display both the point name and the associated Event Enrollment name. Main Menu After the installation, only the most commonly used set of TALON Commissioner application icons display on the Main Menu. NOTICE! All the other applications are available and can be displayed in Main Menu by selecting them from the System menu and customizing the list of applications. Attribute Duplicator Commission Report Generator Desigo CC Export Utility Firmware Loading Tool (FLT) MMI Database Transfer Online Documentation Point Editor Point Transfer Program Editor System Profile User Accounts General Enhancements The necessary software programs for opening a job online are automatically installed. A wizard walks you through configuring your network settings and services the first time the project is opened with 3.15 or later. The network settings are now saved in the project folder and reused on subsequent opening of the project, ensuring that projects can reliably open online and connect to field panels. Commissioning Report Generator has added support for BACnet standard VAV (66xx), BACnet Lab LCM-OAVS (67xx) and RDY (14900 and 14901) applications. Terminal Box Controller (TBC) Test This revision provides support for BACnet Dual Duct PTEC (6665 through 6669) applications. 9 24

10 Section 2 - Fixed Issues Alarm Status Section 2 - Fixed Issues This section lists bug fixes in TALON Commissioner Revision Alarm Status Previously, when a point was configured as an Enhanced Alarm, and the point went into alarm, the Enhanced Alarm pop-up message would display. However, after the point was acknowledged and subsequent alarms occurred, the Enhanced Alarm pop-up message would not display. This issue has been fixed. Previously, when an Event Enrollment Object (EEO) went into Alarm, and then Normal without acknowledging the Alarm state, and then the Normal state was acknowledged, the Alarm Status would revert the EEO to display in Alarm. This would occur if the EEO was configured with a Notification Class that had the Ack required for To Normal transition unselected. This issue has been fixed. Communication Monitor Previously, Communication Monitor would not update when a TALON Commissioner workstation s communication status had changed. Now a pop-up message displays in the System Tray when the communication status changes. In addition, the Workstation Communication Status window displays the current communication status and updates when the status changes. Database Transfer At sites with a large number of field panels, the Database Transfer application would take a long time to launch while the system populated the tree in System Overview. You could not work in other windows or applications while waiting for the application to launch. Now, the tree in System Overview starts loading after the Database Transfer application has launched successfully. While the tree is loading, the System Overview section of the application is disabled, but you can continue to work in other windows or applications. Daylight Saving Time (DST) Previously, when the output format for [ZONE]:NX STRT TIME was set to Date Time, the time displayed in Graphics and Reports was not adjusted for Daylight Saving Time (DST). This issue has been fixed

11 Section 2 - Fixed Issues Graphics Graphics Since TALON Commissioner Revision 3.12, the Run Panel Trend Data Detail report was always enabled in the right-click menu of the graphic control, even if the point was not trended. Siemens Industry, Inc. addressed this issue by providing you the ability to enable the Run Panel Trend Data Detail report in the right click menu if the point is trended, or disable the report if the point is not trended. Only enable this function if the time to display the right-click menu is acceptable. Please contact your Siemens Solution Partner, Authorized TALON Dealer for details on enabling this functionality. Performance improvements were made so that template graphics with associations will open more quickly. Insight Async Service In certain situations, on systems with heavy Remote ALN communications may have caused the Insight Async Service to stop running. As a result, all ALNs would disconnect until the service was restarted. This issue has been fixed. Point Editor Previously, when modifying an LAI, LAO, or LPACI point, if you toggled between the radio buttons in the Output Format section, it could appear that two formats were selected at the same time. This was a display issue, and the last radio button selected was the format that was saved. For example, if you opened the Point Editor, changed the Output Format selection to Time, and then toggled to either Float or Integer, both radio buttons would display as selected. This issue has been fixed. Previously, for the BACnet third-party points, you could not configure, view or modify the Custom Private Messages. This issue has been fixed and you can now configure, view and modify the Custom Private Messages by using the Alarm Message option. Point Transfer The Relinquish Default and Notification Class columns have been added to the Export Field Panel function. The column MAC Address column has been added to the Export TEC/LTEC function. Previously, when the Export Field Panel function was used to export field panel points to Excel, the High limit and Low limit values changed to a default value of 100 and -100 in the Point Editor when the points were imported. This issue has been fixed. Program Editor In some cases, while working in a remote session, when the mouse was moved over a point, the hover text would either briefly display or not display at all. The problem may occur if Microsoft security update MS is installed. This issue has been fixed

12 Section 2 - Fixed Issues Scheduler Previously, when there were multiple DEFINE statements in a program and the cursor was positioned on the variable in the Program Editor application, POINT NOT FOUND IN DATA BASE displayed instead of the point information. This issue has been fixed. When the cursor is positioned over a point name, the correct information now displays. Scheduler Previously, certain sites experienced a problem when downloading the BACnet Schedules to a field panel when SSTO was enabled. This issue only occurred if the computer had a certain type of network card. This issue has been fixed. Previously, when the default system date format (MM/DD/YYYY) was changed to use ASCII month (MMM) instead of the numeric month (MM), you could not select any other day other than today when using the calendar control in the Scheduler application. This issue has been fixed. The Scheduler application is now compatible with all other date formats. System Activity Log Depending on the amount of data in the event log, the System Activity Log could open slowly because the system queried all data, regardless of which columns were selected for viewing. This issue has been fixed. The System Activity Log is now optimized to only query the data for the columns selected for viewing, which results in the System Activity Log opening faster. System Activity Log allows you to select which columns to display. By default, not all columns are selected. Previously, if the System Activity Log was exported, data for the selected columns was exported as expected, but all of the column headings were exported regardless of the selection. If a column in between the selected columns of the list in the Add/Remove Columns dialog box was not selected, the data might be shifted or positioned under the incorrect column heading. For example, even though the Revision and Property columns are not selected by default, these column headings would still display in the exported file, but the data for the Revision and Property columns would not. Instead, data for the columns selected after Revision and Property would be shifted left by two columns. Therefore, the Before and After column data would display under the Revision and Property headings. This issue has been fixed. Previously, the following BACnet Events were logged as an UNKNOWN EVENT in System Activity Log. BACnet FLN device failures. BACnet FLN device return from failure. User Logon on a BACnet field panel. User Logoff on a BACnet field panel. This issue has been fixed

13 Section 2 - Fixed Issues System Profile System Profile Previously, the Print Preview of the System Profile tree always displayed the unlocked padlock icon for secure mode TECs, irrespective of the selection in the Secure Mode TEC options dialog box. This issue has been fixed. Previously, when an FLN had more than 90 FLN devices defined, the System Profile application would lock up or take a long time to expand the FLN. This issue has been fixed. Previously, the BACnet TECs with Firmware Revision number BY3[X], would display as third-party devices. This issue has been fixed. Terminal Box Controller (TBC) Startup and Commissioning Tool Previously, you were not able to import a CSV file that was exported from the Point Transfer application in TALON Commissioner Revision 3.14 or later due to the new fields (Network# and Instance#) that were added to the export. This issue has been fixed. TBC can now import CSV files that were generated using the Point Transfer application in all revisions of TALON Commissioner. Previously, some TEC applications were missing. The missing applications have been added and this issue has been fixed. Previously, the TBC Test performance was somewhat ineffective when finding a new application. The performance has been improved. It now recognizes multiple device instances using the same application and will not re-discover the same application again, improving the overall performance. Trend Definition Editor Previously, if you selected an existing trend definition without Enable Buffer Full Notification selected, and you later modified the definition to select Enable Buffer Full Notification, trend data for that point would not automatically upload when the buffer threshold was reached. This issue has been fixed. The trend data automatically uploads when the buffer threshold is reached. The following issues related to Point Trend Logs have been fixed: BACnet MS/TP subpoints for which Trend Logs were created were not displaying in the Object Selector of Trend Definition Editor if the parent field panel was deleted, rediscovered and uploaded. When you unbundled an MS/TP subpoint that already had trend definitions in the database, a second upload of the field panel data was needed in order to collect trend data for the unbundled subpoint. When subpoints that already had trend definitions in the database were rebundled, the trend definitions were deleted. You had to upload the field panel data in order to restore the trend definitions. Previously, in certain instances with large databases, when you deleted trended points in Trend Editor or Trend Grid, the point was not actually removed from the TALON Commissioner database or the field panel. For example, the selected point was still present in the Object Selector as a trended point. The only option for deleting the trended points was through the field panel HMI. This issue has been fixed. Previously, the Priority column in the Trend Data Detail report and the Panel Trend Data Detail report always displayed NONE even when a point was in HAND mode. The Priority column now displays HAND when the point is in HAND mode

14 Section 2 - Fixed Issues Pre-Install Performance improvements were made so that the trend related operations, such as Add, Modify, Delete and trend collection, will occur more quickly. Previously, when creating a BACnet trend from the trend grid, you could not save the threshold value to more than 80%. This issue has been fixed. Pre-Install In the Pre install screen, when you moved the mouse pointer over the Install Dialogic Components for Remote Notification help topic, an incorrect pop-up message displayed. This issue has been fixed. The proper message displays stating to acquire the dialogic software from the vendor where you purchased the dialogic board. Additionally, when clicking the Install Insight on an InfoCenter computer help topic, the relevant help would not display. This issue has been fixed and the help topic now displays. Tools Previously, auto-unbundled point information (such as alarming) would not upload to new devices. This issue has been fixed. Previously, the Supervised Object setting, Bypassed for Alarm setting, did not properly import. This issue has been fixed

15 Section 3 Installation Tools Section 3 Installation These instructions apply to the full 3.15 installation. For instructions on how to install the Service Pack, proceed to Section Installing a Service Pack Release. You can perform the following installations: A new installation of Revision An update to Revision 3.15 from an existing Revision 3.13 or 3.14 installation. Before installation: You can only install the software after you have properly installed and configured a supported Windows operating system. For more information, see Section 4 - System Requirements [ 17]. Though not required, it is recommended that you exit all other applications before installing the software. You should restart your computer when prompted by the installation application. This software revision will only work with TALON Configurator Revision 5.2 or later. Installing the software: CAUTION TALON Commissioner cannot be installed on the same computer in which the TALON View software is already installed. In order to properly install all applications, you must have elevated Windows user privileges on workstations running Windows 7 or later if User Access Control (UAC) is enabled. On the Partner Extranet Web site: From the Engineering and Technical section s BACnet System Tool Downloads page, locate and download the TALON Commissioner Zip file to a local directory, unzip the compressed files, and then double-click the Setup.exe file. Follow the instructions on the screen. To install the WCIS application, from the Engineering and Technical section s BACnet System Tool Downloads page, click the WCIS Download link, and follow the onscreen instructions. If desired, you may later add a custom Main Menu button for the WCIS application; see the online help for details. If a Locked File Detected error message displays during installation, always select the Reboot option, which saves the file until the installation is complete. The new file will be installed when the computer restarts. After installation: If you updated from Revision 3.13 or earlier, you must install the updated Cimetrics BACstac Protocol. For more information, see Updating to the Latest Revision of TALON View in Setting Up BACnet > Setting Up the Network > Updating Workstation, available from the Getting Started link in the Online Documentation screen. If you updated from Revision 3.14, no further action is needed. Navigator Clip Art Files for DESIGNER can be obtained from If you have any other questions or problems, contact your local Siemens Solution Partner, Authorized TALON Dealer

16 Section 3 Installation Section Installing a Service Pack Release Section Installing a Service Pack Release Service Pack Releases are available for automatic download and installation. Once a service pack release is available, you are notified through Common Software Manager. Service Pack Releases are inclusive, so only the latest service pack needs to be installed. NOTE: Service Pack Releases are only compatible with the base revision displayed in the revision string. For example, TC 3.15 SR2 is only compatible with Revision Installing a Service Pack from Software Manager 1. Open the Software Manager by selecting the update notification when it displays in your Notifications area or double-click the Common Software Manager icon from within the Notification icon on the taskbar to open. 2. In the New updates & messages list (TC SRx Update), locate the service pack you want to install. a. Click the item text to see a description of the update. b. To install the update, check the box to the left of the item, and then click Install. c. Click the Download Only button and save the install file to a local folder. d. Double-click the appropriate XXInstall.exe to run the installation and then follow the on-screen instructions

17 Section 4 - System Requirements Section 4 - System Requirements Ensure that the TALON Commissioner workstation meets the following system recommendations: Operating Systems Windows 7 (64-bit) Professional, Ultimate, or Enterprise Edition, Service Pack 1 or later Windows bit Windows bit Cimetrics BACstac PDF Viewer Visual C++ Redistributable Cimetrics BACstac version 6.4-e for BACnet (only required when using TALON Commissioner-Online to connect to BACnet trunks) Adobe Reader software or other PDF viewing software VS 2008 Redistributable Hardware Requirements Processor RAM Hard Dive Any dual-core processor or better 4 GB RAM (Recommended) 6 GB free disk space with a minimum of 500 MB available memory Ethernet Adapter TCP/IP installed and running (Required). Ethernet patch cable (Ethernet or BACnet networks) Only required for use of TALON Commissioner-Online to connect to Ethernet or BACnet trunks. HMI Cable Field panel (6-pin RJ-11) to computer (9-pin RS-232 female) (P/N ) order separately USB Port Video Card and Monitor 2.0 and higher Video card and monitor capable of supporting resolution (required) with a minimum of 16-bit color. If you are using the Enhanced Graphics Option, a dedicated 256 MB video card (minimum) is required

18 Section 5 - Service Pack Releases Revision 3.15, Service Pack Release 2 Section 5 - Service Pack Releases Revision 3.15, Service Pack Release 2 New Features and Enhancements This section describes new features, system enhancements, and information delivered with this service pack release. General Enhancements Support has been added to the release of TALON Commissioner to work with the ABT Site 2.1 software revision. Support has been added for Firmware Revision 3.5, which provides an updated.xml file that displays the revision string information in the field panel. Support has been added for Firmware Revision 3.5, which allows you to modify the Trend Interval and Max Samples properties of a trend definition without the deletion of existing Trend records. Windows bit operating system is now supported. This Service Pack installation includes the previous Service Pack Release 1 content. System Profile System Profile now has the ability to import DXR applications from ABT Site for new Heat Pump and VAV Chilled Beam applications; standard templates (14xxx) and custom templates (15xxx). System Profile now has the ability to import DXR Lab applications from ABT Site for new Fume Hood and CET Applications for standard templates (16xxx). System Profile now has the ability to import the new MS/TP BIM device with the release of TALON Commissioner. This third-party BACnet FLN device is imported from ABT Site into System Profile to a user definable ALN or FLN device. PPCL Debugger PPCL Debugger has been updated to fully resolve point names in the PPCL source code. This helps identify when you have multiple #define names in a PPCL program. PPCL Debugger has been enhanced to use Relinquish Default values for BACnet points. PPCL Debugger point sorting feature now works correctly

19 Section 5 - Service Pack Releases Fixed Issues Fixed Issues General Previously, TALON Commissioner required a new license when working with a Soft Controller. This issue has been fixed. Previously, TALON Commissioner could not import from ABT Site in certain cases. This issue has been fixed. Previously, after creating a new TC-36 field panel using the Fast Forward utility, when you exported a TC-36 from TALON Commissioner to TALON Configurator it would come in as a TC-24. This issue has been fixed. Previously, when you imported a P2 file to the database, it would fail to import a certain point and provide no clear message why the point failed. The MMI Database Transfer (MMIXfer) log message has been enhanced to give you more information as to why the point could not be created and imported. The information will help you figure out why the point is failing to add. This issue has been fixed. Previously, you could not re-create an Event Log database after it was deleted. This issue has been fixed. Tools Previously, when using Non-Field Panel Data Transfer (NPDT), some saved log files that exceeded the character limit would not open. This issue has been fixed

20 END USER LICENSE AGREEMENT FOR SIEMENS TALON COMMISSIONER SOFTWARE IMPORTANT--READ CAREFULLY: This End-User License Agreement ("EULA") is a legal agreement between You (either an individual, a legal entity or any affiliated companies or other entities) and Siemens Industry, Inc. as the licensor (hereafter Siemens or Licensor ) of the LICENSED SOFTWARE specified in Clause 1 (each a Party and collectively Parties ). An amendment or addendum to this EULA may accompany the LICENSED SOFTWARE. The use of the LICENSED SOFTWARE is subject to the provisions of this EULA which is enclosed with the LICENSED SOFTWARE or is integrated therein. Use of the LICENSED SOFTWARE is only permitted in connection with this EULA. The EULA may not be assigned to third parties. BY INSTALLING, COPYING, OR OTHERWISE USING THE LICENSED SOFTWARE YOU ACKNOWLEDGE THAT YOU: (1) HAVE READ AND UNDERSTOOD THIS EULA AND ANY THIRD PARTY LICENSES (INCLUDING ANY OPEN SOURCE SOFTWARE LICENSES) SET FORTH IN THE ADDITIONAL TERMS ADDENDUM BELOW OR MADE AVAILABLE FOR YOUR REVIEW AS SPECIFIED IN CLAUSE 6; AND (2) AGREE TO BE BOUND BY ALL THE TERMS AND CONDITIONS OF THIS EULA AND SUCH THIRD PARTY LICENSES. FURTHERMORE YOU CONFIRM THAT YOU HAVE THE POWER TO MAKE SUCH A DECLARATION ALSO FOR YOUR COMPANY. IF YOU DO NOT AGREE TO ALL THE TERMS AND CONDITIONS OF THIS EULA, YOU ARE NOT ENTITLED TO INSTALL OR USE THE LICENSED SOFTWARE. IN SUCH AN EVENT, YOU SHOULD PROMPTLY CONTACT SIEMENS FOR INSTRUCTIONS ON RETURN OR CERTIFIED DESTRUCTION OF THE LICENSED SOFTWARE. 1. Licensed Software. As used in this EULA, the term LICENSED SOFTWARE shall mean (i) the software offered by Siemens under the brand name "TALON Commissioner" in any release for use with Siemens TALON building automation products that are separately available for purchase from Siemens and (ii) any related documentation for the LICENSED SOFTWARE. 2. Intellectual Property Rights Notice. The LICENSED SOFTWARE and all rights, without limitation including proprietary rights therein (including any all copyrights, patents, trademarks, trade secrets, and publicity rights), are owned by Siemens, its licensors or affiliates. The LICENSED SOFTWARE is protected for Siemens on the basis of copyright law and international treaty provisions as well as on the basis of other laws and agreements regarding intellectual property. Except as expressly and unambiguously provided herein, You do not possess, and Siemens does not grant to You, any express or implied rights (whether by implication, estoppel or other legal theory) in or to any such intellectual property rights and all such rights are retained by Siemens, its licensors or affiliates. You acknowledge and agree that You, and not Siemens, shall be solely responsible for the investigation, defense, settlement and discharge of any intellectual property infringement claim or suit, or any other harm or damages resulting from Your use of or access to the LICENSED SOFTWARE. 3. License Grant. Only a license is granted for the LICENSED SOFTWARE, the LICENSED SOFTWARE is not sold. Siemens grants to You in this EULA a revocable, non-transferable, non-exclusive license to use the LICENSED SOFTWARE in object code solely for Your own use provide You comply with all terms and conditions of this EULA. The configuration and execution of the LICENSED SOFTWARE is supervised by either a hardware dongle with a license key, a remote software sentinel with a license key, or a PC-bound copy protection, supplied separately for the LICENSED SOFTWARE. The EULA permits use of the LICENSED SOFTWARE, only within the boundaries established by the dongle or remote sentinel and the license key. Siemens, in its discretion, may withhold distribution of the license key for use of the LICENSED SOFTWARE by You until an executable version of this EULA is signed by the Parties. 4. Description of Further Rights and Restrictions. a) If the LICENSED SOFTWARE was obtained by You from Siemens directly or through its licensed distributors for use on a single machine, then You may only install the LICENSED SOFTWARE on a single machine owned or licensed by You at any one time

21 b) If the LICENSED SOFTWARE was obtained by You from Siemens or its distributors for networked use, You may copy and distribute the LICENSED SOFTWARE over an internal network for use, at any one time, by the number of active concurrent users for which You obtained a license key from Siemens. c) You may not sublicense, assign or transfer this EULA, the LICENSED SOFTWARE or its components, or any portion thereof without express written consent from Siemens. d) You may not or direct any third party to, reverse engineer, decompile, decode or disassemble the LICENSED SOFTWARE except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. e) You (or any third party at Your direction) also shall not (i) modify or create a derivative work of the LICENSED SOFTWARE, or (ii) extract any individual parts except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. f) This EULA does not grant You any rights whatsoever in relation to Licensor s or Siemens AG s trademarks or service marks. g) Siemens may at its discretion offer You support services concerning the LICENSED SOFTWARE ("Support Services"). Siemens is entitled to use the technical data that You make available to Siemens in connection with the use of the LICENSED SOFTWARE and/or with Siemens Support Services for business purposes, including product ordering, support and development. Siemens does not guarantee that Support Services shall cure any technical problem caused by the use of the LICENSED SOFTWARE. 5. Reservation of Rights. Licensor reserve all rights not expressly granted to You in this EULA. 6. Additional Software / Component or Third Party Licenses. This EULA applies to updates or supplements to the original LICENSED SOFTWARE provided by Licensor or Siemens, unless Licensor or Siemens provides other terms along with the update or supplement. The LICENSED SOFTWARE may contain certain components such as open source software components or third party components licensed by Siemens (each, a Component ). Each Component may have a separate end user license agreement (a Third Party License ). The terms of any Third Party License (if any) that apply to the LICENSED SOFTWARE are either: a) specified in the Additional Terms Addendum below, b) separately accompany the LICENSED SOFTWARE and are automatically presented for acceptance prior to first use of the LICENSED SOFTWARE by You and other users You allow access to the LICENSED SOFTWARE in accordance with the single or networked use licenses You obtained from Siemens, or c) are specified in the READ ME OSS document available at for the LICENSED SOFTWARE. The terms of such Third Party Licenses are herein incorporated by reference to this EULA. 7. Termination: This EULA is effective from the first date You install, copy or otherwise use the LICENSED SOFTWARE. Without prejudice to any other rights of Licensor or Siemens, the EULA shall terminate automatically and immediately without notice upon conditions set forth in Clause 4 or if You fail to comply with any provision or condition of this EULA. In such a case You will be obliged to destroy all copies, all related materials of the LICENSED SOFTWARE and all its components. You may terminate this license at any time by deleting or destroying the LICENSED SOFTWARE, all backup copies and all related materials provided to You by Siemens. 8. Backup Copy and Printing Documentation. You may make one copy of the LICENSED SOFTWARE, excluding the documentation, as an archival backup copy of the original. Any other copies You make of the LICENSED SOFTWARE are in violation of this EULA. If this LICENSED SOFTWARE includes any related documentation provided in electronic form, You may print copies of this electronic documentation. You must reproduce and include the copyright notices on any permitted copies You make of such electronic documentation. 9. Warranty. Siemens shall be only liable for defects and any violation of property rights, as set forth in this Clause

22 a) UNLESS SIEMENS AGREES IN A SEPARATE WRITING TO PROVIDE AN EXCEPTION TO THIS WARRANTY DISCLAIMER WITH RESPECT TO THE LICENSED SOFTWARE, YOU ACKNOWLEDGE THE LICENSED SOFTWARE IS PROVIDED AS IS AND NEITHER SIEMENS NOR ANY OF THEIR LICENSORS (IF ANY) MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE LICENSED SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS. THERE IS NO WARRANTY BY SIEMENS OR THEIR LICENSORS OR BY ANY OTHER PARTY THAT THE FUNCTIONS CONTAINED IN THE LICENSED SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE LICENSED SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY A SIEMENS REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY AFFECT THIS DISCLAIMER. YOU ASSUME ALL RESPONSIBILITY TO ACHIEVE YOUR INTENDED RESULTS AND FOR THE INSTALLATION, USE, AND RESULTS OBTAINED FROM IT. b) Any further rights and remedies than those as per this Clause 9 (in particular Your right to claim damages) based on a defect or a violation of property rights shall be excluded. This exclusion shall not apply in the event of gross negligence, unlawful intent or insofar as mandatory law provides otherwise. 10. Limitation Of Liability. UNLESS OTHERWISE AGREED IN CLAUSES 9 AND 10, IN NO EVENT SHALL SIEMENS, ITS EMPLOYEES, LICENSORS, AFFILIATES, AGENTS OR SIEMENS AG AND THEIR AFFILIATES BE LIABLE FOR ANY LOST PROFITS OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, PROPERTY DAMAGE, LOSS OF PROFITS, INTERRUPTION OF BUSINESS OR FOR ANY SPECIAL, INDIRECT, INCIDENTAL, ECONOMIC, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED, AND WHETHER ARISING UNDER CONTRACT, TORT, NEGLIGENCE, OR OTHER THEORY OF LIABILITY, OR ARISING OUT OF THE USE OF OR INABILITY TO USE THE LICENSED SOFTWARE, EVEN IF SIEMENS IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITATION OF LIABILITY SHALL NOT APPLY IF AND TO THE EXTENT SIEMENS LIABILITY IS MANDATORY UNDER THE APPLICABLE LAW (e.g., PRODUCT LIABILITY LAW OR INTENSIONAL MISCONDUCT)

23 11. Debugging / Technical Support. Unless otherwise agreed, Siemens or SIEMENS AG and their affiliates have no obligation to furnish You with any further technical support or to debug the LICENSED SOFTWARE. Siemens reserves the right to improve the LICENSED SOFTWARE described here and to carry out modifications at any time without any prior notice. 12. Governing Law/Export Restrictions/Legal Compliance. This EULA shall be governed by and construed and interpreted by the laws of the State of Illinois, without regard to any conflict of laws provisions therein. Licensee shall comply with all then-current export and import laws and regulations of the United States and such other governments as are applicable when distributing or using the LICENSED SOFTWARE. Licensee hereby certifies that it will not directly or indirectly export, re-export, transship, or transmit the LICENSED SOFTWARE, or any portion thereof, or related information, media, or products in violation of United States laws and regulations. You represent and warrant that You are not (i) located in any country that is subject to a U.S. Government embargo, or that has been designated by the U.S. Government as a "terrorist sponsoring" country, or (ii) listed on any U.S. Government list of prohibited or restricted parties including the Treasury Department's list of Specially Designated Nationals or the U.S. Department of Commerce Denied Person's List or Entity List. 13. For U.S. Government End Users: The LICENSED SOFTWARE was developed at private expense and is a commercial item as that term is defined at 48 C.F.R , consisting of commercial computer software and commercial computer software documentation as such terms are used in 48 C.F.R Consistent with 48 C.F.R and 48 C.F.R through , all U.S. Government end users acquire the LICENSED SOFTWARE with only those limited rights set forth therein. Publisher is Siemens Industry, Inc., 1000 Deerfield Parkway, Buffalo Grove, Illinois Miscellaneous. This EULA represents the entire agreement between You and Licensor or Siemens relating to the LICENSED SOFTWARE and (i) supersedes all prior or contemporaneous oral or written communications, proposals, and representations with respect to its subject matter; and (ii) prevails over any conflicting or additional terms of any acknowledgement or similar communication between the parties during the term of this License. If any provision of this EULA is held invalid, all other provisions shall remain valid unless such validity would frustrate the purpose of this EULA, and this EULA shall be enforced to the full extent allowable under applicable law. No modification to this EULA is binding, unless in writing and signed by a duly authorized representative of each party. This EULA shall be binding on and shall inure to the benefit of the heirs, successors, and assigns of the parties hereto. The failure of either party to enforce any right resulting from the breach of any provision of this EULA by the other party will not be deemed a waiver of any right related to a subsequent breach of such provision or any other right hereunder. ADDITIONAL TERMS ADDENDUM Note: The Third Party Licenses applicable for Components of a respective release of the LICENSED SOFTWARE are compiled in a readme document that accompanies such release of the LICENSED SOFTWARE and are presented for click through acceptance prior to first use by You and other users You allow access to the LICENSED SOFTWARE in accordance with the single or networked use licenses You obtained from Siemens. Upon request by You, Siemens may provide You with an advanced copy of the readme document containing such Third Party Licenses for the release of the LICENSED SOFTWARE to be licensed to You

24 Issued by Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Pkwy Buffalo Grove IL Siemens Industry, Inc., 2017 Technical specifications and availability subject to change without notice. Document ID: A6V A6V (AA) Release Notes Edition: TC Revision 3.15, Service Pack 2