New Service Release Advisor Management Software: SP7

Transcription

1 New Service Release Advisor Management Software: SP7 New Features Added card details also to the search when the card deck is being searched Monitor - Allowing to define keyboard shortcuts for report displaying Allowing the card conversion pattern to be non- editable FWK - Added new commands By pass-timed and Open-Timed for time bypassing/inhibit and opening Allowing to define the alarm reports as auto-printable Additional events were added to device API Access Guard feature Badge Design for card decks Privileges for issue bar DB backup (periodical) and restore tool The client startup time has been improved by reducing the time to load the language resources Biometric credential type is auto selected according chosen reader for reception Added new device category Automation Added support for Australian English Improved touch support for PTZ controls default card types renamed to more generic names Card name is now not required Additional events were added to the fwk API Visit can now have the reason detail filled-in Added offline.net installer to the setup for installations where access to internet is restricted. The Reset Central Unit device command has been marked as obsolete Issues Resolved Diagnostic - 'Experimental window' has been removed from the panel Failed to retrieve audit log events even for very short time ranges the system regional settings are not applied by default (on login panel) Reports - Edited values are not printed on the report Application Service - Memory performance tuned up Properties filled in driver import wizard are properly filled in driver import driver Visits - Visits overview does not show the used credential Persons - When searching for a person, while the data are still loading app crashes Replicators were not able to unarchive person when it shall be moved from recently removed department to a new one Problems with Importing devices after deleting devices Wasp and client will crashed on getting audit log with lot of events It is not possible to create panels that will upload only PINs when there is only one credential type enabled in the system

2 Improved translation of the "full access sync" event fixed navigation in alarm history panel Persons Present - Query for present persons fails when there is more than sub regions Admin Restore Utility does not restore support user correctly, it misses to add him to Administrators role Access Denied events are not stored when there is empty or misconfigured card conversion pattern Designer - Archived maps are still shown in designer, even when shall be filtered out Packager - Creating package of client plugins is not working Editing report on reception creates a new report with random name Autoimport wizard did not validate properties on retry Selection jumps to top when archiving device from bottom of the tree FWK - When reassigning the position during credential synchronization, it remembers the previous person instead Devices - Linked devices in the tab 'Links' does not show their status Enum values are properly filled when navigating back in driver import wizard Visits - The layout of the panel is broken when recovered from disconnection Card Learning - biometric cards are considered when the card type is resolved, making the card learning useless in that situation CSV import fails when it contains incorrectly formatted GUID identifiers Delay before searching is short, allow enter to start search immediately Access Guard - the detail window displaying person is not limited to a single instance Access Guard - the person check form resizes without any limit when entering text Server technical specification updated, to show the Started and Home editions as not supported Persent Persons - list of persons does not remember the column widths About - Client crashed when copying 'installation path' Czech translation contains some typos Persons in region count does not show more than 2 digits Infobar is not shown when credential synchronization fails Monitor Panel - there is no limit on live events, causing client to fail after some time Access Levels - scrollbar is incorrectly changing its position Autoimport on devices cannot be invoked Filtering in Access Levels filters only by the device name Visitors - Cannot search the active visits by their card name Automatic Actions - after editing the rule it stopped to work Lift Door block/unblock is not signalized as status C4 client performance on Commands permissions is low I can create multiple visitors from previous visit Delete operations goes twice on full upload Wasp crashes on duplicate holidays Wrong events after migration Application server stays stable on SqlException during GetJournal request.

3 Not able to run powershell script Problems with Importing devices after deleting devices Insufficient licenses after driver update Wasp exception regarding to upload Exception (Client.Framework.LiveCollectionView.OnCollectionChanged) Allow to setup PIN range Under some rare circumstances the driver runner fails or recomposition exception Invalid license count when detectors licensed Check duplicity of IDs in c4b import and write duplicates to summary page Delete of logs cause crash Setup should add firewall exception for ports 80/ Learn card button not active Unable to change polygon fill color Cannot add comment in alarm detail Disabled card event - wrong translation Export of event is showing incorrect from/to and is including incorrect events Remember the view position of the selected event after cancelling filter Automatic Action Timer did not elapse when named in lowercase Scrollwheel not working on commands in permissions tab for persons Can not read long note in Alarm detail Archived readers in region are still valid for people counting Icon size changes after column resizing in visualization Wrong order of visualization object properties Icon size changes after column resizing in visualization Archived devices still in Access tab Invalid date format in Person Presence view Align total bit length to the left Time issued AA should respect DST time changes Setup shows warning that service should be stopped before continuing installation Webserver port settings in setup User should not see tabs where he has no permission for any object Setup shows warning that service should be stopped before continuing installation Restarting a disabled driver is still allowing remote control of devices Setup should set delayed service start Search optimization Client displays invalid request messagebox when driver does not support image capture C4 service stopping automatically after system reboot Extended properties are not uploaded for visitors The minimal size of the cctv wall window has been changed to allow smaller sizes On computers without up to date TimeZone informations, the client crashes frequently When FirePreAlarm is upgraded to the FireAlarm, the alarm detail window is not refreshed correctly The polygon shape is resized incorrectly Arming/Disarming on multidetector is not working

4 Import of csv file with ID column of different type than GUID fails In case the card segment has been disabled upload for panels supporting this credential type fails App windows gets into background when closing the report PTZ control stopped to work after the video window is reopened Mail sender crashed when invalid mail address is entered Active alarm icon is not shaking in the alarm window Contextual help is not shown in Designer panel Memory information for upload device is shown incorrectly when some positions are reserved Windows style of the Visit report window is invalid Extension Properties of bool type in between AccessLevels are not merged correctly (shall be OR-ed) Time Synchronization Interval can be set to minus values Controlling commands are enabled for offline cameras Time Restrictions for devices are optimized incorrectly Can't arm areas from input when at least 1 area assigned to input is in alarm When count of persons in region is higher than 99 the number is not displayed correctly Partitions does not show events for their linked zones simplifying the licensing checks for development licenses Detection of.net framework does not work correctly same device in a tree and in monitor have different status displayed Cannot change default port 443 to different value Copy/Paste operations in Designer panel are not working properly Permission view is not refreshed properly Client crashes when searching in monitor App crashed when trying permanently delete linked device devices in a region tree are sorted incorrectly Text is cut off in fingerprint enrollment dialog for Colombian Spanish Some sorting issues Navigation menu is not synchronized when clicking Back button in About Missing translation of command failure reasons Ordering of time zones on Bus Controller properties is incorrect Uninstall of 2016 client uninstalls 2015 client instead Second alarm on same detector stops alarm sound App crashed while archiving and then restoring devices IInitializable and IStartable sequences are ordered incorrectly, resulted in In-deterministic starting order Device names from import files contains unnecessary spaces Schedule week days are not translated properly Driver.Stop is not working in context of packet parsing in drivers Automatic visit cleanup caused db inconsistency in case the visitor returned second day When using custom SSL/TLS certificate, the upgrade removes its port binding and replaces it with the self signed certificate.

5 Driver packages that contains the same filename twice or more times fails to install Unidentified persons (not registered in C4) entered to regions are not possible to remove from region When reverting tree node movements (undo of cut and paste) client crashes Client fails when unknown person leaves the region Combined status Test + Failure is signaled in Client as just Test status Sounder device has no icon Command to send all credentials to device is missing in AA Order of events in the audit log could be swapped when they occur at the "same time" on device Verex migration failed to migrate positional card formats Position management in SDK does not reassigning the position correctly, when the item has been modified (e.g. reduced permissions) ISO image is missing on the portal for download Touch commands are displayed incorrectly when shape is rotated Migration fails when migrating Mexico time zone (as this has been replaced by new TZ system since 2015) Visitor "expiration date" is not refreshed immediately In monitor there are no visible events in history of the current map Verex migration failed to migrate positional card formats Application crashes when adding new AA (under certain circumstances only) When device provides explicit name and is in Generic category, remove the Generic suffix from the add menu Unnecessary menu selection/toggle "Allow without inheritance" on Access permissions was removed Added missing icons of audio devices When adding region-button to visualization and trying to assign it some functionality, the client app crashes When creating a new visit, the client app crashes Improvements Case new commands Audio On and Audio Off were added Simplifying the licensing checks for development licenses Case allowing to move cards between card decks Client now support to be installed on a single machine from multiple sources, but this means, that current clients MUST be reinstalled after the upgrade Case added new command allowing to reset all present persons in region from AA

6 New Service Release Advisor Management Software: SP6 New Features Access Guard feature Badge Design for card decks Privileges for issue bar DB backup (periodical) and restore tool The client start up time has been improved by reducing the time to load the language resources Biometric credential type is auto selected according chosen reader for reception Added new device category Automation Added support for Australian English Improved touch support for PTZ controls default card types renamed to more generic names Card name is now not required Additional events were added to the fwk API Visit can now have the reason detail filled-in Added offline.net installer to the setup for installations where access to internet is restricted. The Reset Central Unit device command has been marked as obsolete Bug fixes Lift Door block/unblock is not signalized as status C4 client performance on Commands permissions is low I can create multiple visitors from previous visit Delete operations goes twice on full upload Wasp crashes on duplicate holidays Wrong events after migration Application server stays stable on Sql Exception during Get Journal request Not able to run PowerShell script Problems with Importing devices after deleting devices Insufficient licenses after driver update Wasp exception regarding to upload Exception (Client.Framework.LiveCollectionView.OnCollectionChanged) Allow to setup PIN range Under some rare circumstances the driver runner fails or re composition exception Invalid license count when detectors licensed Check duplicity of IDs in c4b import and write duplicates to summary page Delete of logs cause crash Setup should add firewall exception for ports 80/ Learn card button not active Unable to change polygon fill colour Cannot add comment in alarm detail

7 Disabled card event - wrong translation Export of event is showing incorrect from/to and is including incorrect events Remember the view position of the selected event after cancelling filter Automatic Action Timer did not elapse when named in lowercase Scroll wheel not working on commands in permissions tab for persons Can not read long note in Alarm detail Archived readers in region are still valid for people counting Icon size changes after column resizing in visualization Wrong order of visualization object properties Icon size changes after column resizing in visualization Archived devices still in Access tab Invalid date format in Person Presence view Align total bit length to the left Time issued AA should respect DST time changes Setup shows warning that service should be stopped before continuing installation Webserver port settings in setup User should not see tabs where he has no permission for any object Setup shows warning that service should be stopped before continuing installation Restarting a disabled driver is still allowing remote control of devices Setup should set delayed service start Search optimization Client displays invalid request message box when driver does not support image capture C4 service stopping automatically after system reboot Extended properties are not uploaded for visitors The minimal size of the cctv wall window has been changed to allow smaller sizes On computers without up to date Time Zone information, the client crashes frequently When FirePreAlarm is upgraded to the FireAlarm, the alarm detail window is not refreshed correctly The polygon shape is resized incorrectly Arming/Disarming on multidetector is not working Import of csv file with ID column of different type than GUID fails In case the card segment has been disabled upload for panels supporting this credential type fails App windows gets into background when closing the report PTZ control stopped to work after the video window is reopened Mail sender crashed when invalid mail address is entered Active alarm icon is not shaking in the alarm window Contextual help is not shown in Designer panel Memory information for upload device is shown incorrectly when some positions are reserved Windows style of the Visit report window is invalid Extension Properties of bool type in between AccessLevels are not merged correctly (shall be OR-ed) Time Synchronization Interval can be set to minus values

8 Controlling commands are enabled for offline cameras Time Restrictions for devices are optimized incorrectly Can't arm areas from input when at least 1 area assigned to input is in alarm When count of persons in region is higher than 99 the number is not displayed correctly Partitions does not show events for their linked zones simplifying the licensing checks for development licenses Detection of.net framework does not work correctly same device in a tree and in monitor have different status displayed Cannot change default port 443 to different value Copy/Paste operations in Designer panel are not working properly Permission view is not refreshed properly Client crashes when searching in monitor App crashed when trying permanently delete linked device devices in a region tree are sorted incorrectly Text is cut off in fingerprint enrollment dialog for colombian spanish Some sorting issues Navigation menu is not synchronized when clicking Back button in About Missing translation of command failure reasons Ordering of timezones on Bus Controller properties is incorrect Uninstall of 2016 client uninstalls 2015 client instead Second alarm on same detector stops alarm sound App crashed while archiving and then restoring devices IInitializable and IStartable sequences are ordered incorrectly, resulted in indeterministic starting order Device names from import files contains unnecessary spaces Schedule week days are not translated properly Driver.Stop is not working in context of packet parsing in drivers Automatic visit cleanup caused db inconsistency in case the visitor returned second day When using custom SSL/TLS certificate, the upgrade removes its port binding and replaces it with the self signed certificate Driver packages that contains the same filename twice or more times fails to install Unidentified persons (not registered in C4) entered to regions are not possible to remove from region When reverting tree node movements (undo of cut and paste) client crashes Client fails when unknown person leaves the region Combined status Test + Failure is signaled in Client as just Test status Sounder device has no icon Command to send all credentials to device is missing in AA Order of events in the audit log could be swapped when they occur at the "same time" on device Verex migration failed to migrate positional card formats Position management in SDK does not reassigning the position correctly, when the item has been modified (e.g. reduced permissions) ISO image is missing on the portal for download

9 Touch commands are displayed incorrectly when shape is rotated Migration fails when migrating Mexico time zone (as this has been replaced by new TZ system since 2015) Visitor "expiration date" is not refreshed immediately In monitor there are no visible events in history of the current map Verex migration failed to migrate positional card formats Application crashes when adding new AA (under certain circumstances only) When device provides explicit name and is in Generic category, remove the Generic suffix from the add menu Unnecessary menu selection/toggle "Allow without inheritance" on Access permissions was removed Added missing icons of audio devices When adding region-button to visualisation and trying to assign it some functionality, the client app crashes When creating a new visit, the client app crashes Improvements Case new commands AudioOn and AudioOff were added Simplifying the licensing checks for development licenses Case allowing to move cards between card decks Client now support to be installed on a single machine from multiple sources, but this means, that current clients MUST be reinstalled after the upgrade Case added new command allowing to reset all present persons in region from AA