BCF2000. EDIT MODE Push Encoder Operation Off, Bank Select MSB Bank Select LSB Change-Value: Off, Off,

Transcription

1

2 OPERATING MODES U1 Push Encoder Controller Type 1 TYPE 2 CH 3 PAR 4 VAL 1 5 VAL 2 6 MODE 7 OPT 8 DISP MIDI Type MIDI Ch. Parameter Value 1 Value 2 Controller Mode Controller Option Display Value PROGRAM CHANGE (PC) 116 Off, Off, Fixed Program Bank Select MSB Bank Select LSB ChangeValue: Off, 116 BCF2000 MODE Push Encoder Operation Off, Off, see below* Bank Select MSB Bank Select LSB U2 U3 CONTROL CHANGE (CC) NonRegistered Parameter Numbers (NRPN) 116 CC OnValue: 116 CC 116 NRPN Parameter Number 116 NRPN Parameter Number /16383 OnValue: /16383 OffValue: Off, /16383 OffValue: Off, /16383 Toggle Absolute, see below* Relative 1, 2, 3, Absolute (14Bit), Relative 1, 2, 3 (14Bit) Toggle Absolute, see below* Relative 1, 2, 3, Inc./Dec., Absolute (14Bit), Relative 1, 2, 3 (14Bit) MIDI NOTE (NOTE) 116 MIDI Note Number: Fixed Velocity Value: Toggle U4 PITCH BEND 116 Range: see below* (PB) S1 S2 AFTER TOUCH (AT) MIDI MACHINE CONTROL (MMC) 116 Key Number: ALL (Channel After Touch), 116 MIDI Device Number: ALL, 0126 Key Number: ALL (Channel After Touch), Select: Play, Pause, Stop, Forward, Rewind, Locate, Punch In, Punch Out OnValue: If Frame Rate not "Off": Locate Position Time (1st Part): hh:mm Locate Position always sent first (before MMC Command) OffValue: Off, Toggle If Frame Rate not Frame Rate: "Off": Off, 24, 25, 30d Locate Position (Drop Frame), 30 Time (2nd Part): ss:ff (Frames) Locate Position always sent first (before MMC Command) see below* S3 GS/XG PARAMETER (GS) 116 Select GS/XG Main Control Parameters with clear text indication 116 Select GS/XG Main Control Parameters with clear text indication OnValue: OffValue: Off, Toggle see below* S4 Controller Type MIDI Type MIDI Ch. Parameter Value 1 Value 2 Controller Mode Controller Option Display Value Push Encoder 1 TYPE 2 CH 3 PAR 4 VAL 1 5 VAL 2 6 MODE 7 OPT 8 DISP *CONTROLLER OPTION PUSH ENCODERLEDs: Off, 1d (1 LED on), 1d (1 LED on with Value 0 = LED off), 2d, 2d, Bar, Bar, Spread, Pan, Qual(ity "Q"), Cut(off), FADER: Move, PickUp, FOOT CONTROL: Move, PickUp

3 Preset Name: E1 E 18 b 18 FOOT SW/CTRL E2 E 916 b 916 E3 E 1724 b 1724 E4 E 2532 b 2532 b 3340 b 4148 Fd 18 : TURN/MOVE : PUSH MODE: Edit Mode selected GLOBAL MODE: ENCODER GROUP COPY: /TURN/MOVE CONTROL ELEMENT 4. PUSH ENCODER 1: MIDI Type 2: MIDI Ch. 3: Parameter 4: Value 1 5: Value 2 6: Controller Mode 7: Controller Option 8: Display Value Global Mode selected 3. PUSH ENCODER 1: Operating Mode 2: Global RX Ch. 3: Footswitch 4: Start Preset 5: Device ID 6: SysEx Dump 7: / 8: MIDI Interval (ms) 1. SELECT SOURCE ENCODER GROUP 3. SELECT DESTINATION ENCODER GROUP 3. RELEASE 5. PUSH 4. PUSH 4. PUSH EXIT EXIT STORING RECEIVED SINGLE DUM /COPY/OVERWRITE: LEARN MIDI DATA: 1. Single Preset Dump from external device to BCONTROL's MIDI IN or USB 3. SELECT desired destination preset 1. PUSH 3. PUSH LEARN 3. RELEASE LEARN 2. SELECT destination /TURN/MOVE CONTROL ELEMENT 4. MIDI data to BCONTROL 4. PUSH PANIC RESE DATA REQUES RECALL: 1. & TURN SNAPSHOT SEND: SINGLE DUM 1. SELECT or & EXIT Panic Reset done LEARN Request done 2. RELEASE Control sent Single Preset Dump sent For templates, presets and more, visit

4 BCF2000 USER S # Preset Description 8 Push Encoders ( Turn Function) ( Push Function) Buttons 8 Faders 4 Buttons (Right Section) Foot Sw/Ctrl 2004 BEHRINGER Spezielle Studiotechnik GmbH. No responsibility is taken for the correctness of this information.

5

6