SINGLE, BI-PARTING, BYPASSING UP TO 400LBS (CONTACT US FOR HEAVIER PANELS)
|
|
- Harold Parker
- 5 years ago
- Views:
Transcription
1 PRODUCT SPECIFICATIONS ODEN TOP MOUNT -/8" MINIMUM UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 4//208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 4 " OPTIONAL " DETAIL C SCALE "=' ( : 4) " 8 " MAXIMUM WITH BOTH STANDOFFS* " MAXIMUM WITH 4 ONE STANDOFF* 7" MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL " 9 6 " MIN* TROLLEY MOUNTING SCREWS MUST BE INSTALLED IN CROSS-GRAIN. NEVER INSTALL INTO END-GRAIN. 2" RECOMMENDED " TROLLEY * = THESE LIMITS VARY WITH WOOD SPECIES. 7 6 " DOOR STOP 8 " DOOR OPENING 4 " DOOR PANEL 5 8 " 8 " MAX DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE POST BASEBOARD FLOOR WALL DOOR GUIDE POST** BASEBOARD FLOOR 9 6 " 5 8 " 8 " ** = DOOR GUIDE MAY DIFFER
2 PRODUCT SPECIFICATIONS ODEN FACE MOUNT /4" TO 2-/2"* (CHOOSE TOP MOUNT FOR THICKER PANELS) UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 4//208 * = 2-/2" PANEL WILL HAVE /8" WALL CLEARANCE. DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 4 " OPTIONAL " 2 " DETAIL C SCALE "=' ( : 4) " WITH BOTH STANDOFFS 7 " WITH ONE 8 STANDOFF 4 2 " 4 " RECOMMENDED MAXIMUM 2" RECOMMENDED 7" MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL " " TROLLEY 7 6 " DOOR STOP 5 2 " DOOR OPENING DOOR PANEL DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE POST BASEBOARD FLOOR 4 " WALL DOOR GUIDE POST** BASEBOARD FLOOR 9 6 " 5 8 " 8 " ** = DOOR GUIDE MAY DIFFER
3 PRODUCT SPECIFICATIONS ODEN GLASS MOUNT /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 4//208 DETAIL A SCALE "=' ( : 4) 4 " MINIMUM " " MAXIMUM DETAIL C SCALE "=' ( : 4) 4 " MAXIMUM 2 " MINIMUM 4 " RECOMMENDED MAXIMUM 7" MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL " 2" RECOMMENDED " TRU-LEVEL TM TROLLEY GENERIC WALL SHOWN. TRU-LEVEL TRACK DRAWINGS IN FOLLOWING PAGES WILL COVER FRAMED AND GLASS WALL TYPES. 7 6 " DOOR STOP 5 2 " DOOR OPENING DOOR PANEL DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE BASEBOARD, TRIM, CHANNEL, ETC FLOOR 4 " WALL DOOR GUIDE* BASEBOARD, TRIM, CHANNEL, ETC FLOOR 8 " * = DOOR GUIDE MAY DIFFER
4 PRODUCT SPECIFICATIONS ODEN TOP MOUNT -/8" MINIMUM UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 4//208 WHAT'S INCLUDED: 2 x - #A204 - ODEN TOP MOUNT TROLLEY KIT x - #A020 - DOOR GUIDE POST KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) #A204 - ODEN TOP MOUNT TROLLEY KIT (x 2 INCLUDED) #488 - TOP MOUNT PANEL SCREW ODEN TOP MOUNT TROLLEY ASSEMBLY #67 - SAFETY STOP #64 - SAFETY STOP SCREW #A020 - DOOR GUIDE POST (x INCLUDED*) #06 - BOTTOM GUIDE SCREW #254 - BOTTOM GUIDE POST #69 - BOTTOM GUIDE POST SHIMS * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST
5 PRODUCT SPECIFICATIONS ODEN FACE MOUNT /4" TO 2-/2"* (CHOOSE TOP MOUNT FOR THICKER PANELS) UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 4//208 WHAT'S INCLUDED: 2 x - #A205 - ODEN FACE MOUNT TROLLEY KIT x - #A020 - DOOR GUIDE POST KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) * = 2-/2" PANEL WILL HAVE /8" WALL CLEARANCE. #A205 - ODEN FACE MOUNT TROLLEY KIT (x 2 INCLUDED) ODEN FACE MOUNT TROLLEY ASSEMBLY #67 - SAFETY STOP #64 - SAFETY STOP SCREW #20 - " FACE MOUNT SCREW #09 - -/2" FACE MOUNT SCREW #024-2" FACE MOUNT SCREW #640-2-/2" FACE MOUNT SCREW #A020 - DOOR GUIDE POST KIT (x INCLUDED*) #06 - DOOR GUIDE SCREW #254 - DOOR GUIDE POST #69 - DOOR GUIDE SHIM * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST
6 PRODUCT SPECIFICATIONS ODEN GLASS MOUNT /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) UP TO 400LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 4//208 WHAT'S INCLUDED: 2 x - #A206 - ODEN GLASS MOUNT TROLLEY KIT x - #A29 - DOOR GUIDE KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) #A206 - ODEN GLASS MOUNT TROLLEY KIT (x 2 INCLUDED) ODEN GLASS MOUNT TROLLEY #67 - SAFETY STOP #64 - SAFETY STOP SCREW #56 - GLASS BUSHING #65 - PANEL SPACER FOR /8" PANELS #0 - GLASS WASHER PLATE #2 - /4" GLASS PANEL SCREW #20 - " GLASS PANEL SCREW #A020 - DOOR GUIDE KIT (x INCLUDED*) #450 - DOOR GUIDE KIT * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST
7 PRODUCT SPECIFICATIONS - DOOR CONFIGURATIONS TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT /8" = '-0" (:2) /2/208 SINGLE BI-PARTING BYPASSING BI-PARTING-BYPASSING BYPASSING STACKED
8 PRODUCT SPECIFICATIONS TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 WHAT'S INCLUDED: x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE: X x - #A252 - STANDARD TRACK MOUNTING KIT 2 x - #A24 - DOOR STOP KIT X x - #A2 - TRACK CONNECTOR KIT ( x PER TRACK JOINT INLCUDED) #Txxxx - SYSTEM #A252 - TRACK MOUNT KIT (QUANTITY MATCHES THE STANDARD TRACK DRILL PATTERN) #A24 - DOOR STOP KIT (x 2 INCLUDED*) #65 - DOOR STOP NUT (NOT SHOWN) #9 - DOOR STOP #78 - /6" DRYWALL SHIM (2x) #44 - /8" DRYWALL INSERT #4 - /2" DRYWALL INSERT #4 - /4" REQUIRED #64 - DOOR STOP SCREW * = THE DOOR STOP MAY DIFFER - MULTIPLE OPTIONS EXIST VISIT FOR ALL OPTIONS #45 - /4" OPTIONAL #A27 - TRACK SHIM KIT (NOT INCLUDED) #47 - TRACK SHIM (THICK) #46 - TRACK SHIM (THIN, 2x) #297-A - TRACK WASHER PLATE #66 - TRACK WOOD LAG SCREW TRACK SHIMS ARE DESIGNED TO BE INSTALLED AGAINST TRACK TRACK CAP (SYSTEM DEPENDENT) #8 - END CAP #8 - END CAP SCREW #A2 - TRACK CONNECTOR KIT ( x PER TRACK JOINT INLCUDED) #82 - CONNECTOR SCREW #297-B - TRACK CONNECTOR WASHER PLATE TRACK BASE #7 - TRACK SPRING TRACK COVER #8 - TRACK CONNECTOR NUT
9 PRODUCT SPECIFICATIONS - STANDARD TRACK MOUNTING POINT TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 2 " TO 5 8 " DRYWALL " MIN BLOCKING 4 " REQUIRED 4 " OPTIONAL 4 " HOLE IN DRYWALL "
10 PRODUCT SPECIFICATIONS - TRACK CONNECTOR ALL WALL TYPES SINGLE & BI-PARTING TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 REQUIRED MOUNTING " FOR ALL TRACK JOINTS 2ND REQUIRED MOUNTING 6" FOR TRACK JOINTS ON S REQUIRED MOUNTING " FOR ALL TRACK JOINTS 2ND REQUIRED MOUNTING 6" FOR TRACK JOINTS ON S #A2 - TRACK CONNECTOR KIT (INCLUDED IN MULTIPLE TRACK SYSTEMS) #8 - TRACK CONNECTOR NUT #297-B - TRACK CONNECTOR WASHER PLATE #82 - CONNECTOR SCREW
11 PRODUCT SPECIFICATIONS - PERPENDICULAR TRACK MOUNTING POINT TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT /4" = '-0" (:6) /2/208 " 6" MAX X X INSTALLED INTO STRUCTURAL BLOCKING (OPTIMAL) INSTALLED INTO WOOD STUDS SPAN (X) UP TO 8" UP TO 44" UP TO 50" UP TO 62" MAX. PANEL WEIGHT 00lb 275lb 250lb 225lb SPAN (X) UP TO 8" UP TO 44" UP TO 50" MAX. PANEL WEIGHT 50lb 25lb 00lb SCALE: " = '-0" (:4) #A2 - PERPENDICULAR TRACK MOUNT KIT (NOT INCLUDED) 8 " 6 " #682 - /4" DRYWALL INSERT #68 - DRYWALL SHIM #490 - HEIGHT ADJUSTMENT SCREW #487 - TRACK SUPPORT SOCKET #489 - SCREW PLATE " MIN BLOCKING 2 " TO 5 8 " DRYWALL 2 6 " 5 8 " SLOT #488 - #4 SCREW #68 - END CAP SCREW #496 - SOCKET END CAP " 2 6 " 2 8 " SLOT " HOLES #49 - SOCKET SCREWS #65 - TRACK NUT
12 DOCUMENT: PRODUCT SPECIFICATIONS - BYPASSING WITH CENTER MOUNT BYPASSING " = '-0" (:2) TRU-LEVEL TRACK TROLLEY SYSTEM OR BYPASSING DEPENDENT TROLLEY SYSTEM OR TRACK LENGTH DEPENDENT /0/208 TM BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY 4" MINIMUM TO OPTMIZE DOOR TRAVEL: TRACK MUST BE CENTERED OVER OPENING CENTER MOUNT FOR FRONT TRACK TRACK LENGTH MAX. PANEL WEIGHT* UP TO 9FT UP TO FT UP TO 2FT UP TO FT 225lb 200lb 75lb 50lb *EACH PANEL SCALE /2" = ' (:24) " MINIMUM FOR BYPASSING SYSTEMS MINUMUM DOOR PANEL WIDTH = OPENING 2 + 7" REAR PANEL AND TROLLEYS MUST STRADDLE THE CENTER MOUNT OF THE FRONT TRACK DOOR OPENING 0" MANDATORY PANEL OVERLAP CENTER MOUNT FOR FRONT TRACK 2" RECOMMENDED MINIMUM OVERLAP CL OF BYPASSING SYSTEM DETAIL A SCALE 6" = ' ( : 2)
13 PRODUCT SPECIFICATIONS - BYPASSING WITHOUT CENTER MOUNT BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK LENGTH DEPENDENT " = '-0" (:2) /0/208 BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY 6" MINIMUM TO OPTMIZE DOOR TRAVEL: TRACK MUST BE CENTERED OVER OPENING TRACK LENGTH UP TO 4FT UP TO 5FT UP TO 6FT MAX. PANEL WEIGHT* 50lb 25lb 85lb *EACH PANEL " MINIMUM FOR BYPASSING SYSTEMS SCALE /2" = ' (:24) MINUMUM DOOR PANEL WIDTH = OPENING + " 2 DOOR OPENING 2" RECOMMENDED PANEL OVERLAP 2" RECOMMENDED MINIMUM OVERLAP C L OF BYPASSING SYSTEM DETAIL A SCALE 6" = ' ( : 2)
14 PRODUCT SPECIFICATIONS - BYPASSING STACKED BYPASSING STACKED TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK CONFIGURATION, TRACK LENGTH OR TROLLEY SYSTEM DEPENDENT " = '-0" (:2) /0/208 BYPASSING STACKED TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY THE FOLLOWING AMOUNT TO OPTMIZE DOOR TRAVEL: WITH OPTIONAL CENTER MOUNT: 4" MINIMUM* WITHOUT OPTIONAL CENTER MOUNT: 6" MINIMUM* FRONT TRACK SUPPORT REGION ONLY THE FRONT PANEL CAN REACH THIS SECTION. BYPASSING TRACK REGION (WITH OR WITHOUT OPTIONAL CENTER MOUNT) THE REAR PANEL IS RESTRICTED TO MOVEMENT WITHIN THIS SECTION. OPTIONAL CENTER MOUNT (SEE PREVIOUS PAGES FOR MAX PANEL WEIGHT IMPLICATIONS) FRONT PANEL REAR PANEL DOOR OPENING STACKED PANEL AREA 2" RECOMMENDED MINIMUM OVERLAP* 2" RECOMMENDED PANEL OVERLAP* WITH OPTIONAL CENTER MOUNT: 0" MANDATORY PANEL OVERLAP* (SHOWN HERE) WITHOUT OPTIONAL CENTER MOUNT: 2" RECOMMENDED MINUMUM OVERLAP* (NOT SHOWN) FRONT PANEL WILL REQUIRE SPECIAL BOTTOM GUIDE ACCOMODATIONS. CONTACT FOR DETAILS. * = THESE ARE MINIMUMS. EXCEEDING THESE VALUES IS RECOMMENDED TO INCREASE PRIVACY IN SOME INSTALLATIONS.
15 PRODUCT SPECIFICATIONS - BYPASSING PANEL CLEARANCE BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT SYSTEM DEPENDENT AND TRACK LENGTH DEPENDENT " = '-0" (:2) /2/208 MOUNTING STYLE PANEL THICKNESS* TOP MOUNT -/8" TO 2-/2" FACE MOUNT** /4" TO -/8" GLASS MOUNT /8" - /2" *NOT ACCOUNTING FOR BASEBOARD (IF EXISTING) OR OPTIONAL DOOR PULLS **ODEN AND BALDUR ONLY TOP MOUNT FACE MOUNT** (**ODEN AND BALDUR ONLY) GLASS MOUNT " GENERIC TROLLEY FOR CONTEXT ONLY 5 6 " GENERIC TROLLEY FOR CONTEXT ONLY " GENERIC TROLLEY FOR CONTEXT ONLY 4 " OPTIONAL 4 " OPTIONAL 4 " OPTIONAL 4 " REQUIRED REQUIRED S 4 " REQUIRED REQUIRED S 4 " REQUIRED REQUIRED S CONSIDER BASEBOARD, TRIM AND DOOR PULLS 6 " FIXED TROLLEY FOOT DISTANCE CONSIDER BASEBOARD, TRIM AND DOOR PULLS 7 8 " CONSIDER BASEBOARD, TRIM AND DOOR PULLS " MAXIMUM WITH BOTH STANDOFFS 2 " MAXIMUM WITH 4 ONE STANDOFF 5 6 " RECOMMENDED MINIMUM GAP CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6". 6 " MAXIMUM WITH BOTH STANDOFFS 6 " MAXIMUM WITH ONE STANDOFF 2 6 " CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6". 4 " MAXIMUM 2 " MINIMUM 5 6 " CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6".
16 PRODUCT SPECIFICATIONS - UNDRILLED TRACK DRILL PATTERN GUIDE SINGLE & BI-PARTING TROLLEY SYSTEM DEPENDENT SEE BELOW " = '-0" (:2) 9/25/208 STUD DRILL PATTERN: (250LB MAX* PER TRACK) X 6" MAX 2" MAX 6" MAX 2" MAX 6" MAX X CONNECTING MULITPLE TRACKS REQUIRE SPECIAL DRILL PATTERN AT JOINT. SEE TRACK CONNECTOR PAGE FOR DETAILS. PANEL WEIGHT X MOUNTING POINTS UP TO 00 LBS 5" 4 MINIMUM 0 TO 200 LBS 4" 6 MINIMUM 20 TO 250 LBS " 6 MINIMUM "X" IS THE MAXIMUM LENGTH OF TRACK ALLOWED BEYOND END MOUNTING POINTS 9 6 " THRU ALL STRUCTURAL BLOCKING DRILL PATTERN: (400LB MAX* PER TRACK) " " 24" MAX 24" MAX " 24" MAX 24" MAX " " 6 MOUNTING POINTS IS THE MINIMUM FOR THIS TRACK PATTERN 9 6 " THRU ALL * WEIGHT LIMIT MAY BE FURTHER RESTRICTED BY TROLLEY SYSTEM
17 PRODUCT SPECIFICATIONS - BYPASSING TRACK DRILL PATTERN GUIDE BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK CONFIGURATION, TRACK LENGTH OR TROLLEY SYSTEM DEPENDENT " = '-0" (:2) /2/208 BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE. WILL CONFIGURE THE FRONT AND REAR TRACKS USING THE RULES BELOW: TRACK-TO-TRACK CENTER MOUNT DRILL PATTERN TRACK-TO-TRACK END MOUNT DRILL PATTERN 9 4X 6 " STANDARD MOUNTING POINTS 9 X 6 " STANDARD MOUNTING POINTS REAR TRACK " " 8" UP TO 0" UP TO 0" 8" " 8" UP TO 0" UP TO 0" 8" " " " 9 6 " STANDARD MOUNTING POINTS OUTSIDE TRACK-TO-TRACK CONNECTIONS 2 " 2 " TRACK-TO-TRACK MOUNTING POINT 2 " " 2 " TRACK-TO-TRACK MOUNTING POINT C L 2 " TRACK-TO-TRACK MOUNTING POINT 2 " TRACK-TO-TRACK MOUNTING POINT FRONT TRACK
18 PRODUCT SPECIFICATIONS - GLASS DOOR PANEL SPECIFICATIONS /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT " = '-0" (:2) 5/7/208 GLASS PANELS MUST BE FLAT POLISHED AND HAVE A MM CHAMFER ON ALL EDGES. ALL HOLES MUST BE DRILLED OR CNC MACHINED WITH STRAIGHT WALLS AND SEAMED EDGES. DO NOT WATER-JET - NO TAPERED HOLES. ALL TEMPERED GLASS IS SUBJECT TO EXPERIENCE SPONTANIOUS BREAKAGE. IT IS THE BUYERS RESPONSIBILITY TO DETERMINE AND APPROVE GLASS SPECIFICATION(S) SUITABLE TO MEET ALL FACTORS RELEVANT TO THEIR PARTICULAR USE OR APPLICATION IN CONJUNCTION WITH ALL KROWN LAB, INC.'S PRODUCTS. REFERENCE ASTM C048, TROLLEY ATTACHMENT POINTS: LOKI TROLLEYS ONLY TROLLEY ATTACHMENT POINTS: ODEN AND BALDUR TROLLEYS ONLY 4" RECOMMENDED 4" RECOMMENDED 2 "± 2 " "± 2 " 4 "+ - /2" 0" (LOKI ONLY) 2 "± 2 " "± 2 " 5 8 "+ - /2" 0" (ODEN & BALDUR ONLY) DETAIL A SCALE : 6 DETAIL B SCALE : 6
SINGLE, BI-PARTING, BYPASSING UP TO 200LBS (CONTACT US FOR HEAVIER PANELS)
PRODUCT SPECIFICATIONS LOKI TOP MOUNT SINGLE, BI-PARTING, BYPASSING -/8" MINIMUM UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED TRACK STANDOFF
More informationSINGLE, BI-PARTING, BYPASSING UP TO 200LBS (CONTACT US FOR HEAVIER PANELS)
PRODUCT SPECIFICATIONS LOKI TOP MOUNT -/8" MINIMUM UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED 2 5 8 " 4 " OPTIONAL 4 " MIN* 7 6 " MAXIMUM
More informationATLANTIC SHUTTER HARDWARE Storm Rated Installation Instructions
ATLANTIC SHUTTER HARDWARE Storm Rated Installation Instructions For varying heights of shutters, use the following quantities of hinges per shutter: Height from 12" to 48", Two hinges per shutter Height
More informationInnovative Americans, LLC. HD Media Pack Installation Manual
Innovative Americans, LLC HD Media Pack Installation Manual Please read this manual before you begin! Your installation will be EASIER and SAFER if you take a few moments to read this document!! Proudly
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationSNOWBOARD RACK KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 25
SNOWBOARD RACK KIT P/N 2881251 APPLICATION Pro Ride RMK 155 and 163, Axys RMK 155, 163, and 174 BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please
More informationFlat Panel Static Wall Mount MSP-SS (GSM-210)
INSTALLATION INSTRUCTIONS Flat Panel Static Wall Mount (GSM-2) The static wall mount fits most 23 to 30 displays. The mount was designed to adapt to the VESA 75mm/0mm, 0mm/0mm, and 200mm/0mm compliant
More informationISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
More informationENC 125 T/E REFERENCE MANUAL. Acu-Rite Companies Inc.
ENC 125 T/E REFERENCE MANUAL Acu-Rite Companies Inc. ENC 125 T/E Page Introduction... 2 Mounting Preparation... 3 Mounting Information... 4 Encoder Dimensions - ENC 125 T (top mount)... 5 Encoder Dimensions
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationSOLARMOUNT PART & ASSEMBLY BONDING CLAMPS 9/27/2017
SM-A01 PRO SERIES END CLAMP PRO SERIES MID CLAMP 1 7 16" 11 16 " 11 16 " 1 1 2" 1" 30mm to 51mm MODULE FRAME 302035M 302030M 302030D ENDCLAMP PRO MIDCLAMP PRO - MILL MIDCLAMP PRO - DRK MID CLAMP END CLAMP
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationSECTION EGR ELEVATED GLASS RAILING SYSTEMS. A. Tempered Glass Wet Glazed in Elevated Railing Assemblies.
1 SECTION 05 7310 EGR ELEVATED GLASS RAILING SYSTEMS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Wet Glazed in Elevated Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal Fabrications
More informationMotorized Ceiling TV Mount
Motorized Ceiling TV Mount Instruction Manual SKU: MOUNT-E-FD55 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-e-fd55
More informationTable of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
More informationPlease Note: Special Size Standoffs to Order P.O.A
SECTION 2: GLASS FIXINGS INDEX Product Page Uncovered Counter Sunk Bushes - Black or White 2.1 Covered Counter Sunk Bushes - 304SSS Cap 2.2 Anchor Spanner 2.3 Button Head Fixings 2.4 Button Heads, Spacers,
More informationAUG 15 Rev F
ORIGINAL INSTRUCTIONS Small Form-Factor Pluggable (SFP) Cage Assembly Seating Tool Kits Instruction Sheet 408-8848 12 AUG 15 Rev F Compliant Pin Contact Back 2 x 1 Seating Tool 1490197-2 (Shown) Bottomed
More informationDYNAVISION D2 TM INSTALLATION MANUAL
DYNAVISION D2 TM INSTALLATION MANUAL Rev 12 Dynavision International 8800 Global Way, West Chester, Ohio 45069 USA EMAIL:info@dynavisiond2.com, WEBSITE: www.dynavisiond2.com, FAX: (905) 294-6327 Unpacking
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationAssembly Manual for Mobile X-ray
Suitable for Kodak 2000, Kodak 2100, Kodak 2200 and Trophy Elytis - 12 th January 2011 William Green Page 1 of 8 Printed 12/01/2011, 2:07:42 PM Mobile X-ray Parts List 1. 6 x M10 x 65mm UNB CAP Bolts 2.
More informationASSEMBLY AND ADJUSTMENT
EDGE-WALL MONITOR ARM EDGE-WALL Rev A 2/17 Model EDGE-WALL-SLV ASSEMBLY AND ADJUSTMENT EDGE-WALL MONITOR ARM PLEASE REVIEW these instructions before beginning the installation. Check that all parts and
More informationPowerFlex 750-Series Power Option Cabinets
Installation Instructions PowerFlex 750-Series Power Option Cabinets Topic Page Introduction 1 Additional Resources 2 What the Kits Contain 2 Bus-bar Selection Tables 4 Approximate Dimensions 8 Remove
More informationThanks for shopping with Improvements! Chalet Standard Mailbox Item # (With 1 Line Plaque) Item # (With 2 Line Plaque)
Thanks for shopping with Improvements! Chalet Standard Mailbox Item #476200 (With 1 Line Plaque) Item #476242 (With 2 Line Plaque) To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1014
More informationReachFree ID Installation Instructions for Wash Select II. Unitec
ReachFree ID Installation Instructions for Wash Select II Unitec www.startwithunitec.com Proprietary Information and Materials of Unitec Inc. Such proprietary information and materials may not be disclosed
More informationLSM-HD-BE 9 - Lift System Medium with Box Enclosure
SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth lifting action at approximately 40mm [1.6] per second Full cable management Wide range of mounting options 24V DC motor. Suitable for direct DC supply Marine
More informationSECTION TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS. A. Monolithic Tempered Glass Dry Glazed Railing Assemblies.
1 SECTION 05 7310 TAPER-LOC DRY GLAZE GLASS RAILING SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Monolithic Tempered Glass Dry Glazed Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More information2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
More informationAdapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout
Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About
More informationINSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
More informationCutter Option Installation Instructions
This kit includes the parts and documentation necessary to install the cutter option on the Zebra XiII, XiIII, and XiIIIPlus-Series printers. NOTE: The Cutter Option is not available for the 96XiIII. Adding
More informationService Bulletin. MiTek. RoofTracker Roof Truss Roller Press. Machinery Affected: Adding an Operator Platform. Machinery Division
MiTek Machinery Division Service Bulletin Machinery Affected: Document: Title: Applies To: RoofTracker Roof Truss Roller Press SB171 Adding an Operator Platform Frames 51 and Lower Copyright 2006 MiTek.
More informationAssembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationInstallation Guide for DV8 Off-Road Tailgate-Mounted Tire Carrier (18-19 Jeep Wrangler JL)
Installation Guide for DV8 Off-Road Tailgate-Mounted Tire Carrier (18-19 Jeep Wrangler JL) Installation Time: 1 Hour Tools Required Trim removal tool (plastic or wood to prevent scratches on the paint)
More informationEaton LCD Lift Flat Panel Display System. Installation Guide
Eaton LCD Lift Flat Panel Display System Eaton LCD Lift Flat Panel Display System Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document
More informationCOMPOSITE SHUTTERS Table of Contents
COMPOSITE SHUTTERS Table of Contents Features Shutter Styles...2-3 Product Illustration...4 Options and Size Considerations Louver Options...5 Tilt Options: Hide-a-Tilt, Tilt Options: Split Tilt, Panel
More informationThe Minimalist, Modular, Wall-Mounted Standing Desk
The StandCrafted Installation Manual Last Update: 03/04/2016 www.standcrafted.com support@standcrafted.com DISCLAIMERS Copyright StandCrafted LLC. All rights reserved. This document is solely intended
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More informationFrontslide 60/A-Telescopic
Frontslide 60/A-Telescopic Patents A lot of motion with a single slide. Hardware for simultaneously sliding up to 4 wood, metal or aluminium shutters of up to 60 kg (132 lbs.). Guides pages Seite 32 Locking
More information7403 K321. Display Wall Mount. Kit Instructions. Issue A
7403 K321 Display Wall Mount Kit Instructions Issue A ii Revision Record Issue Date Remarks A Nov 2008 First issue 1 Introduction This kit is used in to secure a 7403 Display Head on a vertical surface.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More informationAMERICAN CHANGER & HOFFMAN MINT
AMERICAN CHANGER & HOFFMAN MINT We Are Changing the Industry 1400 N. W. 65 th Place, Fort Lauderdale, Florida 33309 T: (+1) 954-917-3009 F: (+1) 954-917-3079 www.americanchanger.com www.hoffmanmint.com
More informationNext Generation ARINC 600 Connector
Next Generation ARINC 600 Connector Application Specification 114-13272 29 NOV 12 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationALL-FLEX ELECTRIC TABLE BASE
ALL-FLEX ELECTRIC TABLE BASE FLEX2 V3 Rev 01 7 /17 Model FLEX2-SLV-V3 Model FLEX2-BLK-V3 Model FLEX2-WHT-V3 ASSEMBLY AND OPERATION ALL-FLEX ELECTRIC TABLE BASE PARTS AND TOOLS PLEASE REVIEW these instructions
More informationProduct catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
More informationSENC 150 REFERENCE MANUAL
SENC 50 REFERENCE MANUAL SENC 50 Table of Contents / Warnings Page Introduction / Supplied items... 4 2 Preparing the mounting / Mounting information... 5 3 Encoder dimensions... 8 4 Backup spar dimensions...
More informationTECHKNOW, INC. Kiosk Order Confirmation System INSTALLATION MANUAL. Revision Date: July 11, 2012 Part # Version 3.2
document Page 1 of 18 TECHKNOW, INC Kiosk Order Confirmation System INSTALLATION MANUAL Revision Date: July 11, 2012 Part # Version 3.2 Techknow, Inc. 393 Mayfield Road Duncan, SC 29334 www.gotechknow.com
More informationrooms Conference Room Mac Quickstart Guide
rooms Conference Room Mac Quickstart Guide WARNING: IMPROPER INSTALLATION CAN LEAD TO MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers responsibility to make certain
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More informationUniversal Desktop and Monitor Stand
Universal Desktop and Monitor Stand Installation Instructions Kit P/N: 114-6013 Kit Contents Kit Contents: (1) Stand Assembly (1) VESA Monitor Bracket (1) Bottom Bracket (1) Top Bracket (1) Clamp Bracket
More informationElecraft W1 SWR/Wattmeter Enclosure by W8FGU
Elecraft W1 SWR/Wattmeter Enclosure by W8FGU The W1 enclosure is made of Lexan, a polycarbonate, which is very strong. It also has a UV blocking coating on one side and was assembled carefully with this
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationAS&D Railing System Overview ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D RAIL ORDERS
Ph: 1-800-335-5909 Fax 1-800-203-4495 www.absolutedist.com AS&D Railing System Overview AS&D Aluminum Rail with Cable Double Posts for Corners Over-the-Post Top Rail 3-3/16 Cable Spacing Rail Guidelines
More informationzqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationOct 16 Rev D
Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationUse flat head screws for the out side of chassis and pan head screw for inside of chassis.
These are instructions are guidelines in building a Storage Pod. 2-a Use flat head screws for the out side of chassis and pan head screw for inside of chassis. 1. Take the main chassis and check the chassis
More informationNavigator II INstallatIoN MaNUal For static and PaN/tIlt configurations
Navigator II Installation MANUAL For Static and Pan/Tilt Configurations Document Number: 432-0001-00-12, rev 100 FLIR Systems, Inc., 2008. All rights reserved worldwide. No parts of this manual, in whole
More informatione550 Wallstation MANUAL
e550 Wallstation MANUAL 071014 The Enovate Medical e550 Wallstation was designed to set a new standard in quality. Enovate Medical s goal is to provide a wallstation ready for years of use and backed
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationProcedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer
Procedure to Install an IO Expansion Cage Assembly in a Maxum II Modular Oven Analyzer Difficulty Level: Medium Estimated time to execute: 1 Hour Revision History Issue Date Reason 001 5/31/2016 Initial
More informationLUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, ring nut fixing LUMOTAST 25 keylock switch 1-30 LUMOTAST 25 keylock switch 1-31
TAST General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp
More informationINSTALLATION INSTRUCTIONS
AFL TITAN RTD Multiport Terminal AFL TRIDENT Hardened Drop TABLE OF CONTENTS GENERAL... 2 SPECIFICATIONS... 2 PACKAGE CONTENTS... 3 REQUIRED TOOLS... 3 ADD-ON COMPONENTS... 3 TERMINAL MOUNTING STRAND...
More informationHorizontal folding shutter system - Slides in top track No bottom track required - Great for curves. Versatile Unobtrusive
Horizontal folding shutter system - Slides in top track No bottom track required - Great for curves User friendly Easy to maintain Versatile Unobtrusive Spans wide openings Elegant Security solutions for:
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationAS&D Aluminum Rail with Cable
AS&D Railing System Overview AS&D Aluminum Rail with Cable Double Posts for Corners Over-the-Post Top Rail 3-3/16 Cable Spacing Rail Guidelines To comply with engineering and testing posts must be spaced
More informationZodiac FR100 TM INSTALLATION MANUAL
Zodiac FR100 TM INSTALLATION MANUAL June 2014 Table of Contents INTRODUCTION... 3 SPECIFICATIONS... 4 Diodes... 5 Terminal Strips and Cable... 5 READER LAYOUT... 6 READER INSTALLATION... 7 Mounting Plate...
More informationImprove the appearance and accessibility of your rack
Vertical Cable Organizer with D-Ring Hooks - 0U - 6 ft. StarTech ID: CMVER40UD This 6-foot vertical cable manager (2 x 3-foot panels) gives you a simple and space-efficient way to organize the cables in
More information- ELV OVERVIEW. InstallationGuide SUPPLIED PARTS RELATED PARTS. Brackets Fixtures. Other. 1 of 9 IG-STR9-ELV
OVERVIEW The STR9 ELV is a long run, low power, linear surface mount LED lighting system designed for exterior architectural lighting applications. This guide contains important information on planning
More informationProducts Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
More informationworksurface supports & accessories
worksurface supports & accessories P RO D U C T M A P / TA B L E O F C O N T E N T S..................2 8 4 W O R K S U R FA C E S U P P O RT S PA N E L M O U N T E D O V E RV I E W....2 8 8 W O R K S
More informationTechnical Data Sheet Excel 741
Technical Data Sheet Excel 741 Excel 700 Series Features & Options Standard Features Manually-operated individual-panel movable partition STC 43, 48, 50, or 54 Steel faces laminated to gypsum board 102
More informationSECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM
SECTION [13200] FRAMED 2000 CLEANROOM WALL SYSTEM SECTION 1 GENERAL 1.01 SECTION INCLUDES A. This Section specifies all requirements necessary to furnish and install a complete framed modular cleanroom
More information15U Wall-Mount Server Rack Cabinet - 20 in. Deep - Hinged
15U Wall-Mount Server Rack Cabinet - 20 in. Deep - Hinged Product ID: RK1520WALHM This 15U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure
More informationCord- Mounted Female. Mounted Male. Strain relief clamp # needs to be ordered separately w/cord-mounted connections.
-Pin Amp Plastic 0883 Kit (consists of) 080 Receptacle 03 Pins (Qty ) 088 Kit (consists of) 080 Connector 03 Sockets (Qty ) Note: Strain relief clamp 03 needs to be ordered separately with cord-mounted
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationGrass TEC. Face Frame Hinge System. for CABINETRY. tec. The star in your cabinet
Grass TEC Face Frame Hinge System for tec The star in your cabinet Grass TEC Technical Features How to Specify TEC Hinges There are numerous variables that will determine the choice of hinge. Determine
More informationT A B L E O F C O N T E N T S
T A B L E O F C O N T E N T S UNIT 1: INTRODUCTION... 1 BESIDE STORAGE REFERENCE MANUAL FOR CANVAS... 1 CANVAS DISCLAIMER... 1 BESIDE STORAGE EXTENSION TAB... 1 MAIN SECTIONS OF THE BESIDE STORAGE TAB...
More informationFormulate Designer Series 20 Backwall - Kit 11
Formulate Designer Series 20 Backwall - Kit 11 FMLT-DS-20-11 Formulate Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationHD22 and HD30 Service Parts
HD and HD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the
More informationProject 8.1 Model A Button Maker
Project 8.1 Model A Button Maker Introduction Interpreting dimensioned drawings is an important engineering skill. Using drawings to create a computer model of a part or product is also important. Communicating
More informationAIRCRAFT FINISHING ATTACHING CONTROL SURFACES
AIRCRAFT FINISHING ATTACHING CONTROL SURFACES SECTION 3 Attaching the Wings to the Fuselage Pre-preparation: Remove the wing Root Top Skin before installing the wings to the fuselage. Make two wing support
More informationCP5176 Assembly guide. Soldering. CP5176 Assembly guide Main PCB PCB split. Document revision 2.1 Last modification : 12/11/17
CP5176 Assembly guide Safety warning The kits are main powered and use potentially lethal voltages. Under no circumstance should someone undertake the realisation of a kit unless he has full knowledge
More informationCharging Cabinet Owner s Manual
by edugear Charging Cabinet Owner s Manual Before using, please read these operating instructions carefully. They contain important advice concerning the use and safety of your Charging Cabinet. The Charging
More informationShutter Design. Standard Shutters
Shutter Design Revised: DEC. 2017 Standard Shutters Sunland Shutters builds all panels so that the top rail and the bottom rail are as close to the same size as possible. When ordering adjacent shutters
More informationRIT REV REVISOR DESCRIPTION DATE A J. MARCELLO INITIAL RELEASE 5/11/12 DETAIL A SCALE SEE DETAIL A SCALE 0.050
77 UNIVERSAL NUB (IN) REV REVISOR DESCRIPTION DATE 0 8 UNIVERSAL NUB (IN) A J. MARCELLO INITIAL RELEASE 5// 9 A08 PIVOT ARM ASSEMBLY 8 TABLE LAB TABLE 7 086 HINGE ASSEMBLY 6 5 A07 ST0 00_8IN BOLT ASSEMBLY
More informationMiR Top camera. Intel RealSense TM Camera (R200) Technical Documentation
MiR Top camera Intel RealSense TM Camera (R200) Technical Documentation Version 1.1 Release date: 21.12.2016 Table of contents 1 Introduction...3 2 What s included in the box?...3 3 Mounting the top camera...4
More informationInstructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only)
Instructions to Install Retrofit Kit RVMC 4/5000 Machine (MDB Only) **TURN POWER OFF OF MACHINE BEFORE INSTALLATION** READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION Retrofit Kit Contents PART NAME
More informationDUAL-ARM MONITOR MOUNT For in. ( cm) desktop computer monitors
LeviTouch DM-502 DUAL-ARM MONITOR MOUNT For 15 27 in. (38.1 68.6 cm) desktop computer monitors User Manual Thank you for choosing Gabor. The Gabor Dual-Arm Desktop Mount can securely support two monitors
More informationExtra Large Full Motion TV Mount for Televisions
8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84
More informationBondtech QR Installation guide for the BCN3D Sigma
Bondtech QR Installation guide for the BCN3D Sigma 1 Contents Introduction...3 List of tool required...3 Mechanical & Electrical Installation...4 Adjustment of steps/mm...12 2 Introduction This guide shows
More informationSystem Storage EXP3000 Rack Installation Instructions
System Storage EXP3000 Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When you install the IBM System Storage EXP3000 in a
More informationSITRANS F. Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel. Introduction 1. Installing/Mounting 2. Hardware Installation Instructions
Introduction 1 Installing/Mounting 2 SITRANS F Flowmeters SysCom Upgrade Kit IP65 (NEMA 4X) Multi-Channel Hardware Installation Instructions 1/2010 A5E02518333A Revision 04 Legal information Warning notice
More informationDESCRIPTION PRODUCT CODE LIST PRICE DIMENSIONS/INCHES H W D
EXTENSION CONNECTOR EVPBIEC - EXTENSION CONNECTOR FOR POWER BEAM Attaches to power beam connector Includes non slotted extension connector and connecting hardware Must be attached to power beam connector
More informationTASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS
TASER Axon Dock Installation Manual IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.taser.com
More informationTDM To MiniMech conversion ProceDure
TDM To MiniMech conversion ProceDure (Model 9100 ATM) TDN 07102-00079 Apr 1 2009 CorporATe HeAdquArTers: 522 E. Railroad Street Long Beach, MS 39560 PHONE: (228) 868-1317 FAX: (228) 868-0437 COPYRIGHT
More information