LSM-HD-BE 9 - Lift System Medium with Box Enclosure

Transcription

1 SHEET 1 of 9 DESIGN HIGHLIGHTS Quiet smooth lifting action at approximately 40mm [1.6] per second Full cable management Wide range of mounting options 24V DC motor. Suitable for direct DC supply Marine suitable robust beam OPTIONS Electric Flap Actuator FUNCTION An electric mechanism to lift a flat screen television. Suitable for marine use. Shown here for use with an enclosed screen. SUITABILITY Suitable for a total lifting weight of 80Kg [176lbs] or 40Kg [88lbs] in a marine environment. This is the weight of the screen and box enclosure that is made by others. This enclosure can easily take 10Kg [22lbs] of the total capacity. Maximum screen height 1165mm [45.8] Minimum Screen Height 1050mm [41.3] Push Up Flap Fixed Screen Lid Custom screen back cover Lighter duty option Lift systems to suit other screen heights are available. SPECIFYING Check screen mounting details and request a suitable mount plate. Check for screen connectors that may add to screen depth. CONTROL Supplied with basic infrared remote. Can be learnt by many learning remotes. Also has switch control and RS232 so can be operated by relays, switches, Crestron / AMX or Lutron systems. WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident

2 SHEET 2 of 9 Design Highlights MECHANISM AS SUPPLIED A space efficient and robust lifting mechanism, suitable for use in marine environments. The Box Enclosure gives the product a neat finish, concealing all screen connections. Lid Fixing Panel A robust 24V DC motor with a purpose made lead screw enables a quiet and smooth lifting action at approximately 40mm [1.6] per second. High precision linear guideways ensure stability and durability of the beam to prevent any unwanted movement of the screen. Adjustable UP and DOWN positions allow for a precise final setup within the cabinet. The safety switched base reduces the risk of damage to the mechanism or injury to the user by cutting power to the motor when there is an obstruction between the cabinet and base panel. Box Enclosure Mount Panel Full cable management protects all screen and power cables from damage and is easily accessible for future changes to the AV setup. Screen Mount Uprights A wide range of mounting options are available to suit different screens and speaker arrangements. Base Mount Panel Cable Track Lifting Beam

3 Cable Routing Cables travel through a hole in the the centre of the Base Panel and into the Beam. Cables must be routed carefully to prevent any interference with the LSM beam as it operates. SHEET 3 of 9 Screen and Mechanism cables should be routed to a control box outside of the cabinet via an opening in the back of the cabinet or a conduit leading to the bottom. 38mm [1.5] Maximum possible depth of Conduit SCREEN CABLE MECHANISM CABLE POWER CABLE Recommended Cable Exit Point Beam Cable Track A Cables exit Beam and enter Cable Track To Mains Power DETAIL A Control Box

4 SHEET 4 of 9 Mechanism Up - In Cabinet Base Panel to Cabinet Aperture Box Enclosure to Cabinet Aperture A mm [] Minimum Distance from Screen to inside of cabinet Aperture Depth = Screen Depth + 90 [3.6] (Minimum 130) Minimum Distance from Screen to Box Enclosure Top Internal Box Enclosure Height Box Enclosure Internal Width = Screen Width + 40mm [1.6] Maximum Screen Height Maximum Thickness of Base and Cabinet Top Back of Mechanism to Mount B Internal Cabinet Height DETAIL B IMPORTANT: Thicker cabinet tops will require a reduced maximum screen height A Internal Cabinet Width = Screen Width [3.9] Minimum Width = 850 [33.4] SECTION A-A

5 Mechanism Down - In Cabinet Opening in rear face of Box Enclosure must be wide enough to allow access to screen fixings SHEET 5 of 9 Shown with tapered Box Enclosure Lid in square Cabinet Aperture. A tapered Cabinet Aperture can be used to improve the fit. Aperture Depth = Screen Depth + 90 [3.5] Aperture Width = Screen Width + 80 [3.15] U DETAIL T Back of Cabinet to Mount Maximum Thickness of Box Enclosure Back Cover C T DETAIL U Internal Cabinet Height Internal Box Enclosure Height Minimum Distance between Box Enclosure and Cabinet Maximum Screen Height Minimum Screen Height from Base of Cabinet C IMPORTANT: Thicker cabinet tops will require a reduced maximum screen height SECTION C-C

6 Base Panel and Box Enclosure Lid Details SHEET 6 of 9 BOX ENCLOSURE LID (TAPERED) - TOP VIEW NOTE: A tapered Box Enclosure Lid creates a good fit in the Cabinet Aperture and helps the Box Enclosure to locate within the cabinet. Lid Depth = Cabinet Aperture Depth -2mm [0.1] VIEWING SIDE Box Enclosure Lid Width = Cabinet Aperture Width -2mm [0.1] BOX ENCLOSURE BASE PANEL - TOP VIEW Base Panel Depth = Cabinet Aperture Depth -6mm [0.25] Base Panel Width = Cabinet Aperture Width - 6mm [0.25] VIEWING SIDE

7 Screen Mount Adjustability The adjustable Screen Uprights can cater for screen mounting patterns of between 400mm [15.75] and 800mm [31.5] wide. SHEET 7 of 9 Screen Mount Uprights Highest Possible Mount Point C L Lowest Possible Mount Point C L

8 Mechanism Installation Overview SHEET 8 of 9 IMPORTANT: Cabinet work is NOT supplied by Future Automation Box Enclosure Back Cover Lid Fixing Panel Box Enclosure Lid Screen Mount Uprights Back Section Fixing Panels Box Enclosure Back Section Base Fixing Panels Box Enclosure Base The LSM is fixed to the back of the Cabinet with wood screws in each corner

9 Overall Mechanism Dimensions SHEET 9 of 9 MECHANISM - UP POSITION MECHANISM - DOWN POSITION Back Plate Height