Simulator for HC08/MSC08

Transcription

1 Simulator for HC08/MSC08 TRACE32 Online Help TRACE32 Directory TRACE32 Index TRACE32 Documents... TRACE32 Instruction Set Simulators... Simulator for HC08/MSC TRACE32 Simulator License... 3 Quick Start of the Simulator... 4 Peripheral Simulation... 6 Troubleshooting... 7 FAQ... 7 CPU specific SYStem Settings and Restrictions... 8 SYStem.CPU Select CPU type 8 SYStem.Mode Establish the communication with the simulator 8 SYStem.Option IMASKASM Disable interrupts while single stepping 9 SYStem.Option IMASKHLL Disable interrupts while HLL single stepping 9 Memory Classes Support Available Tools 11 Compilers 13 Target Operating Systems 13 3rd-Party Tool Integration 14 Products Product Information 15 Order Information 15 Simulator for HC08/MSC08 1

2 Simulator for HC08/MSC08 Version 16-Nov-2018 All general commands are described in the PowerView Command Reference (ide_ref.pdf) and General Commands Reference. Simulator for HC08/MSC08 2

3 TRACE32 Simulator License [build DVD 02/2016] The extensive use of the TRACE32 Instruction Set Simulator requires a TRACE32 Simulator License. For more information, see Simulator for HC08/MSC08 3

4 Quick Start of the Simulator To start the simulator, proceed as follows: 1. Select the device prompt for the Debugger and reset the system. B:: RESet The device prompt B:: is normally already selected in the command line. If this is not the case, enter B:: to set the correct device prompt. The RESet command is only necessary if you do not start directly after booting TRACE Specify the CPU specific settings. SYStem.CPU <cpu_name> The default values of all other options are set in such a way that it should be possible to work without modification. Please consider that this is probably not the best configuration for your target. Simulator for HC08/MSC08 4

5 3. Enter debug mode. SYStem.Up This command resets the CPU and enters debug mode. After this command is executed it is possible to access memory and registers. 4. Load the program. Data.LOAD.<format> <filename> ; load program and symbols See the Data.LOAD command reference for a list of supported file formats. If uncertain about the required format, try Data.LOAD.auto. A detailed description of the Data.LOAD command and all available options is given in the reference guide. 5. Start-up example A typical start sequence is shown below. This sequence can be written to a PRACTICE script file (*.cmm, ASCII file format) and executed with the command DO <filename>. B:: WinCLEAR SYStem.CPU <cpu_name> SYStem.Up Data.LOAD.<format> <filename> Register.Set pc main PER.view ; Select the device prompt ; Clear all windows ; Select CPU type ; Reset the target and enter ; debug mode ; Load the application ; Set the PC to function main ; Show clearly arranged peripherals ; in window *) Data.List ; Open source code window *) Register /SpotLight ; Open register window *) Frame.view /Locals /Caller Var.Watch %Spotlight flags ast ; Open the stack frame with ; local variables *) ; Open watch window for ; variables *) *) These commands open windows on the screen. The window position can be specified with the WinPOS command. Simulator for HC08/MSC08 5

6 Peripheral Simulation For more information, see API for TRACE32 Instruction Set Simulator (simulator_api.pdf). Simulator for HC08/MSC08 6

7 Troubleshooting No information available. FAQ No information available Simulator for HC08/MSC08 7

8 CPU specific SYStem Settings and Restrictions SYStem.CPU Select CPU type Format: SYStem.CPU <type> <type>: AUTO MC9S08GB32 MC9S08GB60 MC9S08GT32 MC9S08GT60 With this command the processor type is selected. The MC9S08 has internal device and mask specific registers which allow the debugger to select the CPU type automatically. This is done for all known versions if the pull down menu in the field CPU shows AUTO. For new mask revisions or devices you can select the CPU manually with this command. NOTE: If you type SYStem.CPU at the command line followed by a blank, the softkeys (below the command line) provide you with all supported derivatives. SYStem.Mode Establish the communication with the simulator Format: SYStem.Mode <mode> <mode>: Down NoDebug Go Up Default: Down. Selects the target operating mode. Down NoDebug The CPU is in reset. Debug mode is not active. Default state and state after fatal errors. The CPU is running. Debug mode is not active. Debug port is tristate. In this mode the target should behave as if the debugger is not connected. Simulator for HC08/MSC08 8

9 Go Up The CPU is running. Debug mode is active. After this command the CPU can be stopped with the break command or if any break condition occurs. The CPU is not in reset but halted. Debug mode is active. In this mode the CPU can be started and stopped. This is the most typical way to activate debugging. If the mode Go is selected, this mode will be entered, but the control button in the SYStem.state window jumps to the mode Up. SYStem.Option IMASKASM Disable interrupts while single stepping Format: SYStem.Option IMASKASM [ON OFF] Default: OFF. If enabled, the interrupt mask bits of the CPU will be set during assembler single-step operations. The interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are restored to the value before the step. SYStem.Option IMASKHLL Disable interrupts while HLL single stepping Format: SYStem.Option IMASKHLL [ON OFF] Default: OFF. If enabled, the interrupt mask bits of the CPU will be set during HLL single-step operations. The interrupt routine is not executed during single-step operations. After single step the interrupt mask bits are restored to the value before the step. Simulator for HC08/MSC08 9

10 Memory Classes Description P: Program D: Data E: Hidden access to CPU memory while foreground emulation is active ( Emulation memory access is the original of this name) Simulator for HC08/MSC08 10

11 Support Available Tools CPU ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR MC68HC05B16 YES YES MC68HC05B32 YES YES MC68HC05C YES YES MC68HC05D YES YES MC68HC05X YES YES MC68HC08AB YES YES MC68HC08AS YES YES MC68HC08AT YES YES MC68HC08AZ YES YES MC68HC08AZ0 YES YES MC68HC08GP YES YES MC68HC08XL36 YES YES MC68HC705-X32 YES YES MC9S08AC16 YES YES MC9S08AC8 YES YES MC9S08AW16 YES YES MC9S08AW32 YES YES MC9S08AW48 YES YES MC9S08AW60 YES YES MC9S08AW8 YES YES MC9S08DE32 YES YES MC9S08DE60 YES YES MC9S08DN16 YES YES MC9S08DN32 YES YES MC9S08DN48 YES YES MC9S08DN60 YES YES MC9S08DV128 YES YES MC9S08DV16 YES YES MC9S08DV32 YES YES MC9S08DV48 YES YES MC9S08DV60 YES YES MC9S08DV96 YES YES MC9S08DZ128 YES YES MC9S08DZ16 YES YES Simulator for HC08/MSC08 11

12 CPU MC9S08DZ32 YES YES MC9S08DZ48 YES YES MC9S08DZ60 YES YES MC9S08DZ96 YES YES MC9S08EL16 YES YES MC9S08EL32 YES YES MC9S08EN16 YES YES MC9S08EN32 YES YES MC9S08GB32 YES YES MC9S08GB60 YES YES MC9S08GT32 YES YES MC9S08GT60 YES YES MC9S08JM32 YES YES MC9S08JM60 YES YES MC9S08LC32 YES YES MC9S08LC60 YES YES MC9S08QA4 YES YES MC9S08QD2 YES YES MC9S08QD4 YES YES MC9S08QE128 YES YES MC9S08QE4 YES YES MC9S08QE64 YES YES MC9S08QE8 YES YES MC9S08QE96 YES YES MC9S08QG4 YES YES MC9S08QG8 YES YES MC9S08RC16 YES YES MC9S08RC32 YES YES MC9S08RC60 YES YES MC9S08RC8 YES YES MC9S08RD16 YES YES MC9S08RD32 YES YES MC9S08RD60 YES YES MC9S08RD8 YES YES MC9S08RE16 YES YES MC9S08RE32 YES YES MC9S08RE60 YES YES MC9S08RE8 YES YES MC9S08RG32 YES YES MC9S08RG60 YES YES MC9S08SG16 YES YES Simulator for HC08/MSC08 12 ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR

13 CPU MC9S08SG32 YES YES MC9S08SG4 YES YES MC9S08SG8 YES YES MC9S08SH4 YES YES MC9S08SH8 YES YES MC9S08SL16 YES YES MC9S08SL8 YES YES ICE FIRE DEBUG MONITOR TRACE POWER INTEGRATOR INSTRUCTION SIMULATOR Compilers Language Compiler Company Option Comment C CX68HC08 Cosmic Software COSMIC C HICROSS-68HC08 NXP Semiconductors HICROSS Target Operating Systems Company Product Comment - OSEK via ORTI Elektrobit Automotive ProOSEK via ORTI GmbH Micrium Inc. uc/os-ii 2.0 to 2.8 Simulator for HC08/MSC08 13

14 3rd-Party Tool Integration CPU Tool Company Host WINDOWS CE PLATF. - Windows BUILDER CODE::BLOCKS - - C++TEST - Windows ADENEO - X-TOOLS / X32 blue river software GmbH Windows CODEWRIGHT Borland Software Windows Corporation CODE CONFIDENCE Code Confidence Ltd Windows TOOLS CODE CONFIDENCE Code Confidence Ltd Linux TOOLS EASYCODE EASYCODE GmbH Windows ECLIPSE Eclipse Foundation, Inc Windows CHRONVIEW Inchron GmbH Windows LDRA TOOL SUITE LDRA Technology, Inc. Windows UML DEBUGGER LieberLieber Software Windows GmbH SIMULINK The MathWorks Inc. Windows ATTOL TOOLS MicroMax Inc. Windows VISUAL BASIC Microsoft Corporation Windows INTERFACE LABVIEW NATIONAL Windows INSTRUMENTS Corporation TPT PikeTec GmbH Windows CANTATA QA Systems Ltd Windows RAPITIME Rapita Systems Ltd. Windows RHAPSODY IN MICROC IBM Corp. Windows RHAPSODY IN C++ IBM Corp. Windows DA-C RistanCASE Windows TRACEANALYZER Symtavision GmbH Windows ECU-TEST TraceTronic GmbH Windows UNDODB Undo Software Linux TA INSPECTOR Vector Windows VECTORCAST UNIT Vector Software Windows TESTING VECTORCAST CODE COVERAGE Vector Software Windows Simulator for HC08/MSC08 14

15 Products Product Information OrderNo Code LA-8805 SIM-08 Text TRACE32 Instruction Set Simulator for HC05/08 TRACE32 Instruction Set Simulator HC05/HC08 Order Information Order No. Code Text LA-8805 SIM-08 TRACE32 Instruction Set Simulator for HC05/08 Simulator for HC08/MSC08 15