Materialise Magics 23. What s new
|
|
- Darren Barton
- 5 years ago
- Views:
Transcription
1 Materialise Magics 23 What s new
2 Index UX/UI Improvements View cube and general toolbar Settings Performance improvements Magics RP Fillet Cut or punch: lap joint cut Boolean Honeycomb structures Tools enhancements Label tags Label: Data matrix tab Positioning tools Quality control features Reporting enhancements PMI compatibility (Beta) Other improvements Support Generation (SG) Support parameters pages Metal Support Generation (SG+) In-line angled support Automatic angled support Materialise e-stage for Metal e-stage for Metal integration Sinter Module Nesting graph Nesting pre-process improvements Other Modules Slice-Based Tetrashell module Materialise Streamics Simulation Calibration process Mechanical simulation Job manager Results visualization
3 UX/UI Improvements
4 View cube and general toolbar The new interactive view cube is now always accessible directly on the scene. Just click on it, and switch to the desired view Cube sides are linked to the standard 2D views Cube corners are linked to the standard trimetric views When in 2D view, easily switch between views via the arrows located around the cube Option to lock the view cube rotation via the Settings dialog All most used view and marking tools are now easily accessible in the general toolbar
5 Settings Define the visualization parameters of the grid and the support via the Settings dialog Customize the default format used to save projects
6 Performance improvements Performance has been improved for several features, resulting in a smoother user experience Selection of points, lines, triangles, etc. (e.g. during measurements or part points translation - marking features are not affected) Parts translation and rotation Undo/redo saving and loading, which results in general performance improvements
7 Magics RP
8 Fillet Optimize the design of your parts by rounding parts edges Select a single edge or an entire contour in one click Define the resulting surface smoothness via the tolerance parameter Remove fragile sharp edges from your parts by applying fillets with a small radius
9 Cut or punch: lap joint cut Create a one-step cut on multiple areas of a section Choose Two points option and select multiple points pairs on the section contours Define a separate clearance on the back side of the cut and get full control over the assembly phase
10 Boolean Indicate parts directly from the scene and manage them via the lists Subtract multiple parts at the same time Use the clip operation to create pins or fitted parts: a subtract and an intersect operation are performed in one step
11 Honeycomb structures Get full control over the structure position to improve the part quality Translate it horizontally and/or vertically Rotate it along the defined infill direction Easily align the view with the infill direction for a better understanding of the transformations Preview the structure to cut down the amount of iterations Generate a self-supporting structure* to avoid support placement and save time during the post-processing phase * Patent pending
12 Tools enhancements Hollow: shell tab Apply triangle reduction only to the newly created surfaces, keeping the original mesh unchanged Perforator Select and edit multiple perforation previews at the same time Label Correctly align a label text with multiple lines to the area boundaries
13 Label tags Design and save label tags containing label planning information to the tags library Apply these tags in future projects, and easily edit the label content accordingly to the specific project Add label tags to a part with label planning, without the need to remove it or apply it as STL
14 Label: Data matrix* tab Store part information into a data matrix and scan the printed part for fast and easy tracking Input text/numbers/symbols in Magics and convert them to a data matrix * Patent pending
15 Positioning tools Automatic placement Z-position is kept for parts placed outside of the platform Parts are positioned next to each other when placed outside of the platform Already placed parts are now taken into account when auto-placing upon import Shape sorter* Automatically orient similar parts and place them both on horizontal and vertical axis *Sinter Module or Support Generation Module license is required
16 Quality control features Quickly create round tensile bars for the quality control of your build Available in Create dialog Create and manage profiles for quality parts in Machine properties Use.matpart files as quality parts to preserve label plannings and support
17 Reporting enhancements New tags are added to the Materialise fields add-in: Maximum build height is added to the Platform fields category Support volume is added to both the Platform fields and Part fields category When multi -section is enabled in Magics, the tag Part image will export the section of the part
18 PMI compatibility* (Beta) Product Manufacturing Information (PMI) dimensions and annotations added to a part in a CAD software can now be imported and saved in a Magics project View all PMI on the part at once Select standard or customized views and visualize only PMI linked to the selected view *Only with NX (Unigraphics) or Solidworks Import Module
19 Other improvements Color Create Automatically generate a new primitive: the tube Machine properties Set and visualize recoater and gas flow direction on the platform to improve part orientation and placement Apply colors to single subparts of a Composed Part
20 Support Generation (SG)
21 Support parameters pages Get access to informative images and descriptions of support parameters in Support Generation mode Easily switch between available support type profiles Set a default profile to use when entering Support Generation mode
22 Metal Support Generation (SG+)
23 In-line angled support Angle a support immediately from the connection points with a part Avoid part to part support for more complex surfaces
24 Automatic angled support Avoid part to part support by automatically angling the support Define the minimal angle of the support Ensure a distance is kept between the support and the part Enable automatic angled support in the Machine Properties and perform it as a default operation when entering Support Generation mode
25 Materialise e-stage for Metal
26 Materialise e-stage* for Metal integration Generate e-stage points in Support Generation mode Easily edit, move or delete points as needed Generate e-stage support* based on the created points *e-stage support volume is now correctly calculated during volume estimation * Patented
27 Sinter Module
28 Nesting graph Get insights into the nesting process and better control on when to stop it Observe the changes in height and density throughout the nesting process Zoom in on the graph to observe particular time frames in more detail Export the graph to PNG or the CSV graph values to
29 Nesting pre-process improvements Save time during the pre-processing phase Duplicated parts are now pre-processed only once Pre-processing speed has been increased for small part intervals (0 1,5 mm) Time (sec) Magics Magics
30 Other modules
31 Slice-Based Tetrashell TM Module Improve the workflow for casting projects with Slice-Based Tetrashell TM Work smoothly and faster without heavy STL files Tetrashell TM structure is previewed in Magics and directly sliced via Materialise Build Processor *For compatibility with Materialise Build Processors please contact your local Materialise office
32 Materialise Streamics Visualize Materialise Streamics comments on parts as annotations in Magics Never miss an important work instruction anymore
33 Simulation
34 Calibration process 1. Prepare calibration build: load test geometries on a platform in a single click Create a calibration profile for your simulation jobs to capture: Differences in powder 2. Print*, cut and measure deformation Differences in process parameters Differences in machines *Do not apply heat treatment to the build and do not remove the parts from the build plate 3. Calibration: input the measurements and run a job to create a profile
35 Mechanical simulation Easily set up a simulation job Set the export folder Select the calibration profile Define the simulation accuracy Take advantage of calculations performed by the trusted Marc Solver by Simufact engineering a MSC Software company Prepare build Setup simulation Run simulation Analyze results Build
36 Job manager Manage all the simulation jobs in one place Run and monitor the job progress Visualize information about the simulation setup Load directly the results back to Materialise Magics Prepare build Setup simulation Run simulation Analyze results Build
37 Results visualization Complete toolset to visualize the results and analyze the simulated part Access a complete set of maps corresponding to different simulation results* Analyze the results as they build up layer by layer, including the effect of support removal Measure results locally or modify the color range Analyze the deformation compared to the original part Visualize simulation results in Support Generation mode * Patent pending Prepare build Setup simulation Run simulation Analyze results Build
38 For more information, contact your local Materialise office. materialise.com/contact-locations
Materialise Magics 22. What s new
Materialise Magics 22 What s new Index UX/UI Improvements Part list Perforator & Label tags workflow Machines library (My machines) Build time estimation Performance improvements Software updates Magics
More informationNX Fixed Plane Additive Manufacturing Help
NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 1 NX 11.0.2 Fixed Plane Additive Manufacturing Help June 2, 2017 Version #1 NX 11.0.2 Fixed Plane Additive Manufacturing Help Version #1 2 Contents
More informationAutodesk Fusion 360 Training: The Future of Making Things Attendee Guide
Autodesk Fusion 360 Training: The Future of Making Things Attendee Guide Abstract After completing this workshop, you will have a basic understanding of editing 3D models using Autodesk Fusion 360 TM to
More informationSelective Space Structures Manual
Selective Space Structures Manual February 2017 CONTENTS 1 Contents 1 Overview and Concept 4 1.1 General Concept........................... 4 1.2 Modules................................ 6 2 The 3S Generator
More informationMagics 20. What s new?
Magics 20 What s new? Magics 20, Enabling the Next Generation Nobody can predict the future, but independent of the direction you and other companies will choose, we already developed the technology to
More informationCreating a 2D Geometry Model
Creating a 2D Geometry Model This section describes how to build a 2D cross section of a heat sink and introduces 2D geometry operations in COMSOL. At this time, you do not model the physics that describe
More informationIntroduction. File preparation
White Paper Design and printing guidelines Introduction A print job can be created in either of the following ways: NOTE: HP SmartStream 3D Build Manager supports STL and 3MF files. By using the HP SmartStream
More information3DReshaper Help 2017 MR1. 3DReshaper Beginner's Guide. Tank
3DReshaper Beginner's Guide Tank 1 of 20 1 Introduction The Tank module is dedicated to tank analysis. It is aimed to above ground tanks, with vertical cylinder design, single shell, with or without roof.
More informationMagics Print DLP. Rev. 001
Magics Print DLP Rev. 001 2 Table of contents Table of contents... 2 1 Installation... 4 2 Licensing... 8 2.1 Working with a Local License... 8 2.2 Working with a Floating License... 8 3 Manual & Other
More information3D Modeling and Design Glossary - Beginner
3D Modeling and Design Glossary - Beginner Align: to place or arrange (things) in a straight line. To use the Align tool, select at least two objects by Shift left-clicking on them or by dragging a box
More informationAdjust model for 3D Printing. Direct modeling tools 13,0600,1489,1616(SP6)
Adjust model for 3D Printing Direct modeling tools 13,0600,1489,1616(SP6) Sometimes, the model needs to be prepared or adapted for printing. Adding material, change of a draft angles are an example. In
More informationRelease Notes. Release Date: March, 2018
Release Notes Release Date: March, 2018 Software: Geomagic Design X Version 2016.2.1 TABLE OF CONTENTS 1 INTRODUCTION 1 COPYRIGHT 1 2 INSTALLATION 2 SYSTEM REQUIREMENTS 2 DOWNLOAD AND INSTALL SOFTWARE
More informationExercise Guide. Published: August MecSoft Corpotation
VisualCAD Exercise Guide Published: August 2018 MecSoft Corpotation Copyright 1998-2018 VisualCAD 2018 Exercise Guide by Mecsoft Corporation User Notes: Contents 2 Table of Contents About this Guide 4
More informationTutorial Week 4 Biomedical Modelling in Ansys Workbench (The Complete Guide with Anatomy and Implant)
Tutorial Week 4 Biomedical Modelling in Ansys Workbench (The Complete Guide with Anatomy and Implant) Step 1: Create the Anatomical Model in ScanIP Import the DICOM files for the Proximal Femur dataset
More informationThis lab exercise has two parts: (a) scan a part using a laser scanner, (b) construct a surface model from the scanned data points.
1 IIEM 215: Manufacturing Processes I Lab 4. Reverse Engineering: Laser Scanning and CAD Model construction This lab exercise has two parts: (a) scan a part using a laser scanner, (b) construct a surface
More informationAutodesk Inventor 6 Essentials Instructor Guide Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the follow
Chapter Four: Creating Placed Features Chapter Outline This chapter provides instruction on the following topics and provides exercises for students to practice their skills. Day Two Topic: How to create
More informationMemo Block. This lesson includes the commands Sketch, Extruded Boss/Base, Extruded Cut, Shell, Polygon and Fillet.
Commands Used New Part This lesson includes the commands Sketch, Extruded Boss/Base, Extruded Cut, Shell, Polygon and Fillet. Click File, New on the standard toolbar. Select Part from the New SolidWorks
More information1.1: Introduction to Fusion 360
.: Introduction to Fusion 360 Fusion 360 is a cloud- based CAD/CAM tool for collaborative product development. The tools in Fusion enable exploration and iteration on product ideas and collaboration within
More informationDesign Workflow for AM: From CAD to Part
Design Workflow for AM: From CAD to Part Sanjay Joshi Professor of Industrial and Manufacturing Engineering Penn State University Offered by: Center for Innovative Materials Processing through Direct Digital
More informationAutodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360
Overview Modeling techniques in Fusion 360 Modeling in Fusion 360 is quite a different experience from how you would model in conventional history-based CAD software. Some users have expressed that it
More informationIn this tutorial, you will create the model of a chair, as shown in the image below, using the extended primitives and modifiers.
Office Chair In this tutorial, you will create the model of a chair, as shown in the image below, using the extended primitives and modifiers. Creating the Project Folder Create a new project folder with
More informationStandard Image Build Processor 3.0. User Guide. Rev. 002
Standard Image Build Processor 3.0 User Guide Rev. 002 Standard Image Build Processor 3.0 User Guide Page 2 of 85 Materialise, the Materialise logo, Magics, Streamics and 3-matic are trademarks of Materialise
More informationPage 1 of 8 Tutorial Modeling a Bishop In this lesson you will model a bishop for the chess set. As with the rook, the base of the bishop has already been created. You will add the miter on top of the
More informationConvergent Modeling and Reverse Engineering
Convergent Modeling and Reverse Engineering 25 October 2017 Realize innovation. Tod Parrella NX Design Product Management Product Engineering Solutions tod.parrella@siemens.com Realize innovation. Siemens
More informationME009 Engineering Graphics and Design CAD 1. 1 Create a new part. Click. New Bar. 2 Click the Tutorial tab. 3 Select the Part icon. 4 Click OK.
PART A Reference: SolidWorks CAD Student Guide 2014 2 Lesson 2: Basic Functionality Active Learning Exercises Creating a Basic Part Use SolidWorks to create the box shown at the right. The step-by-step
More informationMechanical Design V5R19 Update
CATIA V5 Training Foils Mechanical Design V5R19 Update Version 5 Release 19 August 2008 EDU_CAT_EN_MD2_UF_V5R19 1 About this course Objectives of the course Upon completion of this course you will be able
More informationIntroduction to Solid Modeling Parametric Modeling. Mechanical Engineering Dept.
Introduction to Solid Modeling Parametric Modeling 1 Why draw 3D Models? 3D models are easier to interpret. Simulation under real-life conditions. Less expensive than building a physical model. 3D models
More information3DReshaper Application. Tank Control with 3DReshaper
3DReshaper Application Tank Control with 3DReshaper Contents 1. Extract the best cylinder... 2 2. 3D Inspection... 2 Compare the tank to the best cylinder... 2 Add labels... 3 Print a report... 3 Go to
More informationParametric Modeling with SOLIDWORKS 2017
Parametric Modeling with SOLIDWORKS 2017 NEW Contains a new chapter on 3D printing Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices.
More informationProNest 2010 Version 9.2
ProNest 2010 Version 9.2 What s New Released August 17, 2011 What s New in ProNest 2010 (v9.2) 1 Enhancements The following enhancements are available in the ProNest 9.2 release: Color-Filled Parts Parts
More informationImages from 3D Creative Magazine. 3D Modelling Systems
Images from 3D Creative Magazine 3D Modelling Systems Contents Reference & Accuracy 3D Primitives Transforms Move (Translate) Rotate Scale Mirror Align 3D Booleans Deforms Bend Taper Skew Twist Squash
More informationStandard DLP Build Processor 1.1. User Guide. User Guide. Rev. 001
Standard DLP Build Processor 1.1 User Guide User Guide Rev. 001 Standard DLP Build Processor 1.1 User Guide Page 2 of 55 Materialise, the Materialise logo, Magics, Streamics and 3-matic are trademarks
More informationWhat s new in EZCAM Version 18
CAD/CAM w w w. e z c a m. com What s new in EZCAM Version 18 MILL: New Curve Machining Wizard A new Curve Machining Wizard accessible from the Machining menu automates the machining of common part features
More informationSOLIDWORKS 2019 Quick Start
SOLIDWORKS 2019 Quick Start David C. Planchard, CSWP, SOLIDWORKS Accredited Educator SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE Powered by TCPDF
More information3D Design with 123D Design
3D Design with 123D Design Introduction: 3D Design involves thinking and creating in 3 dimensions. x, y and z axis Working with 123D Design 123D Design is a 3D design software package from Autodesk. A
More informationSIMCENTER 12 ACOUSTICS Beta
SIMCENTER 12 ACOUSTICS Beta 1/80 Contents FEM Fluid Tutorial Compressor Sound Radiation... 4 1. Import Structural Mesh... 5 2. Create an Acoustic Mesh... 7 3. Load Recipe... 20 4. Vibro-Acoustic Response
More informationHow to create a prototype
Adobe Fireworks Guide How to create a prototype In this guide, you learn how to use Fireworks to combine a design comp and a wireframe to create an interactive prototype for a widget. A prototype is a
More informationSOLIDWORKS 2016 and Engineering Graphics
SOLIDWORKS 2016 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationSimLab 14.1 Release Notes
SimLab 14.1 Release Notes Highlights SimLab 14.0 introduced the new user interface. SimLab 14.1 enhances the user interface using feedback from customers. In addition many new core features have been added.
More informationArcGIS Pro Editing. Jennifer Cadkin & Phil Sanchez
ArcGIS Pro Editing Jennifer Cadkin & Phil Sanchez ArcGIS Pro Editing Overview Provides tools that allow you to maintain, update, and create new data - Modifying geometry, drawing new features - Entering
More informationWhat's New in VisualCAM 2019 for SOLIDWORKS
What's New in VisualCAM 2019 for SOLIDWORKS Jan 30, 2019 This document describes new features and enhancements introduced in MecSoft s VisualCAM for SOLIDWORKS product. 2019, MecSoft Corporation 1 CONTENTS
More informationDesign a Simple Fan in 123D Design
Design a Simple Fan in 123D Design Learn to use 123D Design to make and print this simple fan. 123D Design is a free, powerful, yet simple 3D creation and editing tool. It allows you to design and build
More informationVersion 15 - New Features
Version 15 - New Features Revision 1.5 ErgoSoft AG Moosgrabenstr. 13 CH-8595 Altnau, Switzerland Phone: +41 71 694 6666 Fax: +41 71 694 6660 ErgoSoft AG Moosgrabenstr. 13 CH-8595 Altnau, Switzerland 2016
More informationAutodesk Inventor 2019 and Engineering Graphics
Autodesk Inventor 2019 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More information3D printing Workshop Breakdown
3D printing Workshop Breakdown Opening Lecture/Remarks (20-30 Minutes) -Introduction to 3D modeling software Overview of what 3D modeling software is Introduction to 123D Design Introduction to 123D Design
More information4) Finish the spline here. To complete the spline, double click the last point or select the spline tool again.
1) Select the line tool 3) Move the cursor along the X direction (be careful to stay on the X axis alignment so that the line is perpendicular) and click for the second point of the line. Type 0.5 for
More informationAUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
More information2. Navigate to 3dsystems.com/shop/cubepro/downloads. Select Windows from the Software Download section at the bottom of the page.
CubePro Software CubePro software is an easy-to-use tool that simplifies the printing process. The software is available by logging in to your http://3dsystems.com/shop account. Downloads are available
More informationImposing a job with inpo2 ATOM s wizard. Abstract from inpo2 User s Guide
Imposing a job with inpo2 ATOM s wizard. Abstract from inpo2 User s Guide Imposing with inpo2 ATOM The inpo2 ATOM Wizard allows creating complete imposition layouts and assemblies in just a few clicks.
More informationSheet Metal Overview. Chapter. Chapter Objectives
Chapter 1 Sheet Metal Overview This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements of design,
More informationAutodesk 123D Beta5 Overview
Autodesk 123D Beta5 Overview Welcome. This overview document for Autodesk 123D will assist you in developing your understanding of the software and how you can use it to create your design ideas. Designing
More informationL1 - Introduction. Contents. Introduction of CAD/CAM system Components of CAD/CAM systems Basic concepts of graphics programming
L1 - Introduction Contents Introduction of CAD/CAM system Components of CAD/CAM systems Basic concepts of graphics programming 1 Definitions Computer-Aided Design (CAD) The technology concerned with the
More informationWhat s new in EZ-CAM 2016 (version 23)
What s new in EZ-CAM 2016 (version 23) MILL Pro 64-bit Edition is Ready: EZ-MILL Pro 2016 comes with a 64-bit edition which now makes it possible to import and create 3D toolpaths for very large and complicated
More informationSolid Bodies and Disjointed Bodies
Solid Bodies and Disjointed Bodies Generally speaking when modelling in Solid Works each Part file will contain single solid object. As you are modelling, each feature is merged or joined to the previous
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationLAB # 2 3D Modeling, Properties Commands & Attributes
COMSATS Institute of Information Technology Electrical Engineering Department (Islamabad Campus) LAB # 2 3D Modeling, Properties Commands & Attributes Designed by Syed Muzahir Abbas 1 1. Overview of the
More informationUsing Siemens NX 11 Software. Assembly example - Gears
Using Siemens NX 11 Software Assembly example - Gears Based on a NX tutorial from the NX documentation 1. 1 Introduction. Start NX 11 and create a new assembly file called assembly_gear.prt. 2 Adding a
More informationARCHITECTURE & GAMES. A is for Architect Simple Mass Modeling FORM & SPACE. Industry Careers Framework. Applied. Getting Started.
A is for Architect Simple Mass Modeling One of the first introductions to form and space usually comes at a very early age. As an infant, you might have played with building blocks to help hone your motor
More informationPublication Number spse01695
XpresRoute (tubing) Publication Number spse01695 XpresRoute (tubing) Publication Number spse01695 Proprietary and restricted rights notice This software and related documentation are proprietary to Siemens
More informationAutoCAD 2013 Tutorial - Second Level: 3D Modeling
AutoCAD 2013 Tutorial - Second Level: 3D Modeling Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites to
More informationVERO UK TRAINING MATERIAL
VERO UK TRAINING MATERIAL VISI Basic 2-D Modelling course (V-16) VISI Modelling 2D Design Introduction Many component designs follow a similar route, beginning with a 2D design, part modelled using solids
More informationPage 1 of 7. Please contact you netfabb distributor for more information and ordering.
Page 1 of 7 New Features in netfabb Professional 5 Overview based on netfabb Professional 5.1 including most important features from previous netfabb versions Usability improvements Automatic Repair one-click
More informationPixiRite Tutorials. The Tutorials are designed for PixiRite users,this course is appropriate for beginners and advanced students likewise.
PixiRite Tutorials The Tutorials are designed for PixiRite users,this course is appropriate for beginners and advanced students likewise. Software Version:5.2.1 Preface PixiRite is a software to improve
More informationIntroduction to ANSYS DesignModeler
Lecture 5 Modeling 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations Meshing
More informationTetra4D Reviewer. Version 5.1. User Guide. Details on how to use Tetra4D Reviewer.
Tetra4D Reviewer Version 5.1 User Guide Details on how to use Tetra4D Reviewer. ii Contents Chapter 1: Work area... 7 Looking at the work area... 7 Toolbars and toolbar presets... 8 About toolbars and
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationTopology Optimization for Designers
TM Topology Optimization for Designers Siemens AG 2016 Realize innovation. Topology Optimization for Designers Product Features Uses a different approach than traditional Topology Optimization solutions.
More informationSOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users
SOLIDWORKS 2016: A Power Guide for Beginners and Intermediate Users The premium provider of learning products and solutions www.cadartifex.com Table of Contents Dedication... 3 Preface... 15 Part 1. Introducing
More informationSolidWorks Import Tutorial
SolidWorks Import Tutorial Current Item: SolidWorks Import Tutorial Before You Begin This tutorial will step you through the process of exporting a file from SolidWorks and importing it into Bend-Tech.
More informationWhat's New in BobCAD-CAM V29
Introduction Release Date: August 31, 2016 The release of BobCAD-CAM V29 brings with it, the most powerful, versatile Lathe module in the history of the BobCAD-CAM software family. The Development team
More informationStickFont Editor v1.01 User Manual. Copyright 2012 NCPlot Software LLC
StickFont Editor v1.01 User Manual Copyright 2012 NCPlot Software LLC StickFont Editor Manual Table of Contents Welcome... 1 Registering StickFont Editor... 3 Getting Started... 5 Getting Started...
More informationSOLIDWORKS Parametric Modeling with SDC. Covers material found on the CSWA exam. Randy H. Shih Paul J. Schilling
Parametric Modeling with SOLIDWORKS 2015 Covers material found on the CSWA exam Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF
More informationpre- & post-processing f o r p o w e r t r a i n
pre- & post-processing f o r p o w e r t r a i n www.beta-cae.com With its complete solutions for meshing, assembly, contacts definition and boundary conditions setup, ANSA becomes the most efficient and
More informationPage 1 of 6
Page 1 of 6 www.netfabb.com netfabb Professional Features and Package Types netfabb Professional 5.2 netfabb Small Business netfabb Business Edition netfabb Professional is the most easy to use fully professional
More informationPiping Design. Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index
Piping Design Site Map Preface Getting Started Basic Tasks Advanced Tasks Customizing Workbench Description Index Dassault Systèmes 1994-2001. All rights reserved. Site Map Piping Design member member
More informationChapter 2. Literature Review
Chapter 2 Literature Review This chapter reviews the different rapid prototyping processes and process planning issues involved in rapid prototyping. 2.1 Rapid Prototyping Processes Most of the rapid prototyping
More informationA Study of Angles & Curves
A Study of Angles & Curves Method 1: Cutting Quilt Shapes/Using the Shapes Tools Open BERNINA CutWork Software. Make sure that Create New is selected. Click Next. Place a dot in front of New Graphic. Select
More informationTutorial 1 Engraved Brass Plate R
Getting Started With Tutorial 1 Engraved Brass Plate R4-090123 Table of Contents What is V-Carving?... 2 What the software allows you to do... 3 What file formats can be used?... 3 Getting Help... 3 Overview
More informationFreeform / Freeform PLUS
Freeform / Freeform PLUS WORKING WITH FREEFORM Work from Coarse Clay to Fine When creating new models from scratch, it is best to first create a rough shape using a coarse clay setting such as Rough Shape
More informationSection 8.3: Examining and Repairing the Input Geometry. Section 8.5: Examining the Cartesian Grid for Leakages
Chapter 8. Wrapping Boundaries TGrid allows you to create a good quality boundary mesh using a bad quality surface mesh as input. This can be done using the wrapper utility in TGrid. The following sections
More informationANSYS AIM Tutorial Stepped Shaft in Axial Tension
ANSYS AIM Tutorial Stepped Shaft in Axial Tension Author(s): Sebastian Vecchi, ANSYS Created using ANSYS AIM 18.1 Contents: Problem Specification 3 Learning Goals 4 Pre-Analysis & Start Up 5 Calculation
More informationTRAINING SESSION Q3 2016
There are 6 main topics in this training session which is focusing on 3D Import and 2D Drawing Tips and Tricks in IRONCAD. Content 3D modeling kernels... 2 3D Import... 3 Direct Face Modeling... 5 Unfold
More informationLesson 17 Shell, Reorder, and Insert Mode
Lesson 17 Shell, Reorder, and Insert Mode Figure 17.1 Oil Sink OBJECTIVES Master the use of the Shell Tool Reorder features Insert a feature at a specific point in the design order Create a Hole Pattern
More informationUser Manual Version 1.1 January 2015
User Manual Version 1.1 January 2015 - 2 / 112 - V1.1 Variegator... 7 Variegator Features... 7 1. Variable elements... 7 2. Static elements... 7 3. Element Manipulation... 7 4. Document Formats... 7 5.
More informationAnimation and Mechanization Tutorial
Animation and Mechanization Tutorial Animation v. Mechanization Animation: Allows the operator to move the standard assembly constraints Distance (Mate, Align and Offset) taking periodic snapshots of the
More informationSolidWorks Implementation Guides. User Interface
SolidWorks Implementation Guides User Interface Since most 2D CAD and SolidWorks are applications in the Microsoft Windows environment, tool buttons, toolbars, and the general appearance of the windows
More informationModule 1: Basics of Solids Modeling with SolidWorks
Module 1: Basics of Solids Modeling with SolidWorks Introduction SolidWorks is the state of the art in computer-aided design (CAD). SolidWorks represents an object in a virtual environment just as it exists
More informationChapter 6. Computer Implementations and Examples
Chapter 6 Computer Implementations and Examples In this chapter, the computer implementations and illustrative examples of the proposed methods presented. The proposed methods are implemented on the 500
More informationAll-in-One Software Solution for Metal Additive Manufacturing
All-in-One Software Solution for Metal Additive Manufacturing What Makes 3DXpert Ideal for Metal Additive Manufacturing? Specialized Requirements Call for Specialized Software Metal Additive Manufacturing
More informationNouveautés ANSYS pour le calcul structurel et l impression 3D. CADFEM 2017 ANSYS Additive Manufacturing
Titelmasterformat Journée Technologique durch AddiPole Klicken bearbeiten Nouveautés ANSYS pour le calcul structurel et l impression 3D Titelmasterformat Structural design with durch ANSYS Klicken bearbeiten
More informationParametric Modeling with SolidWorks
Parametric Modeling with SolidWorks 2012 LEGO MINDSTORMS NXT Assembly Project Included Randy H. Shih Paul J. Schilling SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationReadme and update information
hypercad -S Readme and update information Table of Contents 1. hypercad -S is CAD for CAM!... 1 2. Additions to documentation... 2 Release 2018.2 SP1... 2 Release 2018.2... 2 3. Information on direct
More informationPhotoshop / Editing paths
Photoshop / Editing paths Path segments, components, and points Select a path Adjust path segments Add or delete anchor points Convert between smooth points and corner points Adjust path components Path
More informationSpinFire Ultimate Release Notes
SpinFire Ultimate 11.4.0 Release Notes Overview Supported Environments SpinFire Ultimate 11.4.0 introduces connectivity to an organization's Centro catalog allowing users to download and open CAD files
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More informationS206E Lecture 17, 5/1/2018, Rhino & Grasshopper, Tower modeling
S206E057 -- Lecture 17, 5/1/2018, Rhino & Grasshopper, Tower modeling Copyright 2018, Chiu-Shui Chan. All Rights Reserved. Concept of Morph in Rhino and Grasshopper: S206E057 Spring 2018 Morphing is a
More informationSummary. Seeing is Believing - Read More and Watch Demos of Altium Designer 6.6
Whats New in Altium Designer 6.6 Summary Altium Designer 6.6 brings significant refinements to Variants combined with a number of smaller enhancements and improved system-wide support for existing technologies.
More informationUNIT 10: Basic Geometric Shapes
UNIT 10: Basic Geometric Shapes SOLIDCast allows you to create basic geometric shapes that can be part of a casting model. Some simple castings may be created entirely with this type of shape. In other
More informationArcGIS Pro Editing: An Introduction. Jennifer Cadkin & Phil Sanchez
ArcGIS Pro Editing: An Introduction Jennifer Cadkin & Phil Sanchez See Us Here WORKSHOP ArcGIS Pro Editing: An Introduction LOCATION SDCC - Ballroom 20 D TIME FRAME Thursday 10:00 11:00 ArcGIS Pro: 3D
More informationSOLIDWORKS: Lesson III Patterns & Mirrors. UCF Engineering
SOLIDWORKS: Lesson III Patterns & Mirrors UCF Engineering Solidworks Review Last lesson we discussed several more features that can be added to models in order to increase their complexity. We are now
More information