Quick Start Guide. C-100 Access Point. Arista Networks DOC
|
|
- Jennifer York
- 5 years ago
- Views:
Transcription
1 Quick Start Guide C-100 Access Point Arista Networks DOC
2 Headquarters 5453 Great America Parkway Santa Clara, CA USA Support support wifi@arista.com Sales sales@arista.com Copyright 2019 Arista Networks, Inc. The information contained herein is subject to change without notice. Arista Networks and the Arista logo are trademarks of Arista Networks, Inc in the United States and other countries. Other product or service names may be trademarks or service marks of others.
3 Contents Chapter 1. About This Guide...3 Chapter 2. Package Content... 4 Chapter 3. C-100 Overview...5 Front Panel of C Rear Panel of C Chapter 4. Install the C Mount the C Power On the C Connect the C-100 to the Network...9 Connect the C-100 using PoE...9 Using the C-100 with Power Adapter... 9 Chapter 5. C-100 Troubleshooting...11 Chapter 6. Appendix A: AP-Server Mutual Authentication...12
4 Chapter 1. About This Guide This installation guide explains how to deploy the C-100 access point (AP). Important: Please read the EULA before installing C-100. You can download and read the EULA from Installing the AP constitutes your acceptance of the terms and conditions of the EULA mentioned above in this document. Intended Audience This guide can be referred by anyone who wants to install and configure the C-100 access point. Document Overview This guide contains the following chapters: Package Content (page 4) C-100 Overview (page 5) Installing the C-100 (page 7) C-100 Troubleshooting (page 11) Note: All instances of the term 'server' in this document refer to the Wireless Manager, unless the server name or type is explicitly stated. Product and Documentation Updates To receive important news on product updates, please visit our website at We continuously enhance our product documentation based on customer feedback.
5 Chapter 2. Package Content The C-100 package must contain the components shown in the figure below. Figure 1: C-100 Package Components Important: The MAC address of the device is printed on a label at the bottom of the product and the packaging box. Note down the MAC address, before mounting the device on the ceiling or at a location that is difficult to access. If the package is not complete, please contact the Arista Networks Technical Support Team at support-wifi@arista.com, or return the package to the vendor or dealer where you purchased the product.
6 Chapter 3. C-100 Overview C-100 is a 2x a/b/g/n/ac access point. This chapter provides an overview of the C-100 and describes: The Front Panel of the C-100 (page 5). The Rear Panel of the C-100 (page 6). Front Panel of C-100 The front panel of the C-100 has 5 functional LEDs that indicate the working of the device. Figure 2: C-100 Front Panel LEDs The following table indicates the device states based on the LEDs. Table 1: C-100 LED Status Description LED Status Description Power Solid Green Power ON OFF Power OFF 5 GHz Solid Green No activity on 5 GHz radio Blinking Green Wireless activity on 5 GHz radio 2.4 GHz Solid Amber No activity on 2.4 GHz radio Blinking Amber Wireless activity on 2.4 GHz radio
7 C C-100 Overview 6 LED Status Description LAN1 /2 Solid Green Enabled Rear Panel of C-100 The rear panel of the C-100 provides an PoE Ethernet port that enables you to connect the device to a wired LAN through a switch or a hub and power the device by using the 802.3af standard. Figure 3: C-100 Rear Panel Port Description Connector Type Speed/Protocol Ethernet (LAN1/PoE) Gigabit Ethernet port used to connect RJ45 10/100/1000 Mbps Gigabit to the wired LAN and communicate Ethernet with the Arista Cloud or Server. This port can also be used to power the 802.3af Class 0 PoE device using the 802.3af Power over PoE input voltage: 48V Ethernet (PoE) standard. Ethernet (LAN2) Gigabit Ethernet port that can be RJ45 10/100/1000 Mbps Gigabit Ethernet used for wired extension for an SSID. Reset Pin Hole Reset to factory default settings. Pin hole push button Hold down and power cycle the device to reset. DC IN Enables you to connect to and power 6.3 mm barrel -- on device using 12 V DC power with 1.5 ampere. The Reset Pin Hole resets the C-100 device to factory defaults. To reset the device, press and hold the Reset Pin Hole for 10 sec until all LEDs go off which indicates that the device has rebooted. Pressing the Reset Pin Hole while the device is booting up will not have any effect. You should perform this operation only when the device is running. When you reset the device, the following settings are reset: Config shell password is reset to config. Server discovery value is erased and changed to the default, redirector.online.spectraguard.net (primary) and wifisecurity-server (secondary). All the VLAN configurations are lost. If static IP is configured on the device, the IP address is erased and DHCP mode is set. The factory default IP address of the device is
8 Chapter 4. Install the C-100 This chapter contains the stepwise procedure to install the C-100 device. Zero-Configuration of C-100 as Access Point Zero-configuration is supported under the following conditions: The device is in AP mode with background scanning on with no SSID configured. A DNS entry wifi-security-server is set up on all the DNS servers. This entry should point to the IP address of the server. By default, the device looks for the DNS entry wifi-security-server. The device is placed on a subnet that is DHCP enabled. Important: If the device is placed on a network segment that is separated from the server by a firewall, you must first open port 3851 for User Datagram Protocol (UDP) and Transport Control Protocol (TCP) bidirectional traffic on that firewall. This port number is assigned to Arista Networks. If multiple devices are set up to connect to multiple servers, zero-configuration is not possible. In this case, you must manually configure the APs. See the Access Point Configuration Guide on our website at Take a configured C-100, that is, ensure that a static IP is assigned to the device or the settings have been changed for DHCP. Note down the MAC address and the IP address of the device in a safe place before it is installed in a hard-to-reach location. The MAC address of the device is printed on a label at the bottom of the product. Note: You should label the devices using MAC addresses or at least your own convention. For example, use serial numbers, so that you can easily identify the devices. The steps to install the device with no configuration (zero-configuration) are as follows: 1. Mount the device. (page 7) 2. Power On the device. (page 8) 3. Connect device to the network. (page 9) Mount the C-100 The C-100 mounting procedure can be divided into two parts: 1. Affix the bracket to the T -grid: Use the mounting bracket to install the C-100 on the ceiling. Fix the bracket to the T- grid and rotate the bracket so that it snaps on the T-grid. The bracket is now parallel to an arm of the T-grid. Ensure that the bracket is properly snapped to the T-grid. Refer to the images given below.
9 C Install the C Mounting C-100 on the bracket: Place the first mounting post on the rear-side of the device on to the lower notch of the bracket. Rotate the device such that the center mounting post fits in to the center notch on the bracket. Ensure that all the mounting posts on the rear-side of the device are snapped in to the respective notches on the bracket. The mounting posts on the rear-side of the device are now properly fit in the respective notches of the bracket and device is mounted properly. Mounting Instructions using the Silhouette/Interlude Bracket Mount: The Silhouette/Interlude mounting bracket is not a part of the standard package and must be procured separately. The mounting instructions for the Silhouette/ Interlude Bracket Mount are very similar to the Standard Package Content's mounting instructions. Power On the C-100 The C-100 device can be powered on by plugging one end of the Ethernet cable into the PoE (802.3af) switch or injector and the other end into the Ethernet/PoE port on the C-100. Ensure the PoE source you are using is turned ON. As an alternative to PoE, you can insert a compatible power adaptor plug into an AC power outlet and the other end into the power input port on the C-100.
10 C Install the C Note: If you are not using PoE, ensure that you use only an AC power adaptor supported by the C-100 access point (AP). Connect the C-100 to the Network To connect C-100 to the network, perform the following steps: 1. Ensure that a DHCP server is available on the network to enable network configuration of the C Add the DNS entry wifi-security-server on all DNS servers. This entry should point to the IP address of the server. 3. Ensure that DHCP is running on the subnet to which the device will be connected. 4. Check the status LEDs on the device. If all LEDs glow green, then the device is operational and connected to the server. 5. Log on to the server using ssh and run the get sensor list command. You will see a list of all Arista devices that are recognized by the server. Single Sign-On users can go to the Devices tab in Wireless Manager and check whether the device is visible under the Devices tab. The device is connected and ready to go operational. Note: If the zero configuration is not successful, the device must be configured manually. See the Access Point Configuration Guide on our website at Important: If DHCP is not enabled on a subnet, the device cannot connect to that subnet with zeroconfiguration. If the DNS entry is not present on the DNS servers or if you do not have the DHCP server running on the subnet, you must manually configure the device. Connect the C-100 using PoE If you are using a PoE injector, make sure the data connection is plugged into a suitable switch port with proper network connectivity. Using the C-100 with Power Adapter To power up the device with power adapter, perform the following steps: 1. Plug the power cable into the DC power receptacle at the rear of the device.
11 C Install the C Plug the other end of the power cable into an 110V~240V 50/60 Hz AC power source. 3. Wait until the device is ready. Refer to the LED details table.
12 Chapter 5. C-100 Troubleshooting The table below lists some of the troubleshooting guidelines for C-100. Diagnosis Solution The device did not receive a valid IP address via the DHCP. Ensure that the DHCP server is on and available on the VLAN/subnet to which the device is connected. If the device still fails to get a valid IP address, you can reboot it to see if the problem is resolved. The Ethernet cable is loose. The device is probably disconnected from the Ensure that the Ethernet cable is connected. network. Unable to connect to the server. Ensure that the server is running and is reachable from the network to which the device is attached. If there is a firewall or a router with ACLs enabled between the device and the server, ensure that the traffic is allowed on UDP port Use the server IP-based discovery and ensure that you have correctly entered the DNS name, wifi-security-server, on the DNS server. Also, ensure that the DNS server IP addresses are either correctly configured on the, or are provided by the DHCP server. It is also possible that the AP is unable to connect to the server because it has failed to authenticate with the server. In this case, an 'Authentication failed for ' event is raised on the server. Refer to the event for recommended action. The AP has encountered a problem. If you are using Arista Cloud Services, then open the TCP port 443 (SSL). If you have an on-premises installation, then open the ports UDP 3851 and port 80. If you are using a Proxy, Web Accelerator or URL Content Filter in between the AP and the Internet, ensure the settings allow communication between the AP and Arista Cloud Services. If your configuration requires you to specify an exact IP address or IP range for Arista Cloud Services, please contact support-wifi@arista.com.
13 Chapter 6. Appendix A: AP-Server Mutual Authentication The AP-server communication begins with a mutual authentication step in which the AP and server authenticate each other using a shared secret. The AP-server communication takes place only if this authentication succeeds. After the authentication succeeds, a session key is generated. All communication between the AP and server from this point on is encrypted using the session key. The AP and server are shipped with the same default value of the shared secret. The CLI commands are provided on both server and AP for changing the shared secret. Note: After the shared secret (communication key) is changed on the server, all APs connected to the server will automatically be set up to use the new communication key. APs that are not connected to the server at this time must be manually set up with the same communication key to enable communication with this server. Note: Although the server is backward compatible, that is, older version APs can connect to a newer version server, this is not recommended.
Quick Start Guide. W-118 Access Point. Arista Networks. DOC
Quick Start Guide W-118 Access Point Arista Networks www.arista.com DOC-03485-01 Headquarters 5453 Great America Parkway Santa Clara, CA 95054 USA + 1 408 547-5500 www.arista.com Support +1408547-5502+
More informationQuick Start Guide. C-120 Access Point. Arista Networks DOC
Quick Start Guide C-120 Access Point Arista Networks DOC-03482-01 Headquarters 5453 Great America Parkway Santa Clara, CA 95054 USA + 1 408 547-5500 www.arista.com Support +1408547-5502+ 1 866 4 76-0000
More informationTroubleshooting CHAPTER
CHAPTER 3 This chapter provides troubleshooting procedures for basic problems with the access point. For the most up-to-date, detailed troubleshooting information, refer to the Cisco Technical Support
More information802.11ac Wireless Access Point Model WAC104
Point Model WAC104 User Manual October 2016 202-11698-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationAC WiFi Business Access Point WAC510 User Manual
AC WiFi Business Access Point WAC510 User Manual with NETGEAR Insight app for easy management December 2016 202-11686-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this
More informationRANGER SERIES. 300Mbps CEILING MOUNT ACCESS POINT DG-WM2005SI. 300 Mbps V
RANGER SERIES 300Mbps CEILING MOUNT ACCESS POINT DG-WM2005SI N 300 Mbps V1.0 2014-05-19 FCC Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital
More informationSpectraGuard Sensor SS-300-AT-C-50 Technical Specifications
SpectraGuard Sensor SS-300-AT-C-50 Technical Specifications 1 Product Overview ITEM Product Name Model Number Power Supply SpectraGuard Sensor SS-300-AT-C-50 802.3af Class 0 Power Over Ethernet Nominal
More informationWireless ADSL2+ Modem Router Setup Manual
Wireless ADSL2+ Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10087-01 2006-4 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark
More informationInsight Managed Smart Cloud Wireless Access Point User Manual
Insight Managed Smart Cloud Wireless Access Point User Manual Model WAC510 February 2018 202-11840-03 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product.
More informationHardware overview. Package contents MSM710, documentation, power supply, self-adhesive rubber feet.
In MSM710 Controller Quickstart This Quickstart applies to both the MSM710 Access Controller (J9328A) and the MSM710 Mobility Controller (J9325A). This Quickstart introduces the HP ProCurve Networking
More informationHome automation hub installation and setup guide
installation and setup guide is placed in a closed off area, the wireless signal strength may be compromised. Note: To prevent radio frequency (RF) interference, we recommend that you place the away from
More informationMARQUE: GARMIN REFERENCE: EX FRS CODIC: NOTICE
MARQUE: GARMIN REFERENCE: EX3800-100FRS CODIC: 4121198 NOTICE Model EX3800 User Manual May 2015 202-11488-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products.
More informationNighthawk Multi-Gig Speed Cable Modem User Manual
Nighthawk Multi-Gig Speed Cable Modem User Manual Model CM1100 August 2018 202-11884-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit
More informationQuick Install & Troubleshooting Guide. WAP223NC Cloud Managed Wireless N Access Point
Quick Install & Troubleshooting Guide WAP223NC Cloud Managed Wireless N Access Point Package Contents 1 x WAP223NC Indoor access point powered by CloudCommand 1 x wall and ceiling mounts 1 x 24V PoE power
More informationCM500 High Speed Cable Modem User Manual
User Manual November 2014 202-11472-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
More informationVoice Cable Modem User Manual
User Manual Model CM1150V July 2018 202-11879-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your
More informationNighthawk X4 AC2200 WiFi Range Extender
Nighthawk X4 AC2200 WiFi Range Extender Model EX7300 User Manual April 2016 202-11577-01 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit
More informationN900 Wireless Dual Band Gigabit Router
Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information
More informationDeploy a Customer Site
Local Administration, on page 1 Run Port Check Tool, on page 4, on page 4 Add Cisco Wireless IP Phone 8821 to the Wireless LAN, on page 6 Provision the Phone, on page 7 Local Administration You can connect
More informationVoice Cable Modem User Manual
User Manual Model CM500V September 2017 202-11792-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationOperating Instructions APX 120
Foreword We are pleased to welcome you as a new Sophos APX Series customer. Sophos APX Series access points are high performance wireless products using the latest 82.11ac Wave 2 technology for a best-in-class
More informationSmart Sensor Gateway Installation Manual
TECHNICAL DOCUMENT Smart Sensor Gateway Installation Manual 2019-02-08 1/16 Table of Contents 1 GENERAL 3 2 INSTALLATION 4 2.1 Prerequisites for Installation 4 2.2 Recommended Location 5 2.3 Gateway Configuration
More informationOperating Instructions APX 320/530/740
APX 32/53/74 Foreword We are pleased to welcome you as a new Sophos APX Series customer. Sophos APX Series access points are high performance wireless products using the latest 82.11ac Wave 2 technology
More informationUser Manual. AC ac Wireless Access Point/Router. Model WAC124. NETGEAR, Inc.
AC2000 802.11ac Wireless Access Point/Router Model WAC124 December 2018 202-11885-02 NETGEAR, Inc. 350 E. Plumeria Drive San Jose, CA 95134, USA AC2000 802.11ac Support Thank you for purchasing this NETGEAR
More informationInsight Managed Smart Cloud Wireless Access Point User Manual
Insight Managed Smart Cloud Wireless Access Point User Manual Model WAC505 February 2018 202-11757-03 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product.
More informationZN-7100-DE500-G V ac Wireless Access Point Quick Setup Guide
Bottom View ZN-7100-DE500-G V2 802.11ac Wireless Access Point Quick Setup Guide This Quick Setup Guide provides step-bystep instructions on how to set up your ZN- 7100-DE500-G V2 Wireless Access Point.
More informationHigh Speed Cable Modem
Model CM1000 User Manual September 2016 202-11620-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationLevelOne. User Manual. WAP Mbps PoE Wireless AP V3.0.0
LevelOne WAP-0005 108Mbps PoE Wireless AP User Manual V3.0.0 i TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 1 FIGURE 1: WIRELESS ACCESS POINT... 1 FEATURES OF YOUR WIRELESS ACCESS POINT... 1 Security Features...
More informationInstallation. ProSAFE Wireless Controller Model WC7500 and Model WC7600
Installation ProSAFE Wireless Controller Model WC7500 and Model WC7600 Hardware Overview Before you install your wireless controller, familiarize yourself with its LEDs, buttons, and ports. Digital access
More informationAC1200 WiFi Range Extender
Model EX6200v2 User Manual July 2018 202-11628-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationHardware overview. Package contents V-M200, documentation, three antennas, and power supply.
The HP V-M200 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/g and 802.11n product. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. In HP V-M200 802.11n Access Point Quickstart
More information802.11N Wireless Broadband Router
802.11N Wireless Broadband Router Pre-N Wireless Access Point Broadband Internet Access WPS 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless Router Features... 1
More informationThe MSM335 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED product. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The MSM335 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED product. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. In MSM335 Access Point Quickstart This Quickstart shows you how
More informationQuick Installation Guide
Quick Installation Guide WAP-EN1750C AC1750 Ceiling Mount Access Point I. I Product Information I-1. Package Contents 1 2 5 6 3 4 7 1. Access Point 5. Quick Installation Guide 2. Ceiling Mount Bracket
More informationNetwork Planning Guide for ProSafe VPN Firewall Router FVX538
Network Planning Guide for ProSafe VPN Firewall Router FV538 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10066-01 (Beta Draft) 2004 by NETGEAR, Inc. All rights reserved. FullManual.
More informationOperating Instructions
KX-HGW500 WIRELESS LAN1 LAN2 LAN3 LAN4 INTERNET POWER Network Camera Management System Operating Instructions Model No. KX-HGW600 Please read this manual before using and save this manual for your future
More information802.11g Wireless Access Point
802.11g Wireless Access Point WAP-4036 Quick Installation Guide Table of Contents Package Content... 3 Hardware Installation... 4 Initial Configuration... 5 Further Configuration... 8 Package Content 1
More informationWireless Network Video Recorder
LD2R/LD2R500 Wireless Network Video Recorder User Guide Version 1.0 PREFACE Thank you for purchasing the Wireless Network Video Recorder, an IP based device that installed on your network, which can be
More informationCM500 High Speed Cable Modem User Manual
User Manual February 2015 202-11477-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
More informationGigabit Ethernet Switch. Quick Installation Guide MS400834M
Gigabit Ethernet Switch Quick Installation Guide MS400834M Version 1.0 Gigabit Ethernet Switch Quick Installation Guide II Table of Contents Table of Contents... ii 1. Introduction... 1 1.1 Overview...
More informationTroubleshooting 1240AG Series Autonomous Access Points
CHAPTER 3 Troubleshooting 1240AG Series Autonomous Access Points This chapter provides troubleshooting procedures for basic problems with the 1240AG series autonomous access point (AIR-AP1242AG or AIR-AP1242G).
More informationInsight Managed Smart Cloud Wireless Access Point User Manual
Insight Managed Smart Cloud Wireless Access Point User Manual Model WAC510 September 2017 202-11840-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product.
More informationUser Manual DIR-850L. Wireless AC1200 Dual Band Gigabit Router.
User Manual DIR-850L Wireless AC1200 Dual Band Gigabit Router USER MANUAL: DIR-850L Wireless AC1200 Dual Band Gigabit Router SYSTEM REQUIREMENTS Network Requirements Web-based Configuration Utility Requirements
More informationQuick Install Guide. Model: PLC-223W, PLC-233W
Quick Install Guide Model: PLC-223W, PLC-233W This installation guide provides basic instructions for installing the PLC-213W/ PLC-223W/PLC-233W indoor wireless IP camera on your network. By following
More informationAC1900 Nighthawk WiF Mesh Extender
AC1900 Nighthawk WiF Mesh Extender Model EX7000 User Manual July 2018 202-11469-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support
More informationPart I: External Installation Direction
Part I: External Installation Direction A. Check the parts in your box CPE SET 1 DC 12V/1.5A Power Adapter 1 PoE DC Injector 1 Hose Clamps 2 Manual & QIG CD 1 Paper QIG 1 B. How to fix the CPE on the Pole
More informationRuckus Wireless ZoneFlex 7762 Dual Band n Outdoor Access Point. Installation Guide
Ruckus Wireless ZoneFlex 7762 Dual Band 802.11n Outdoor Access Point Installation Guide Part Number 800-70216-001 (Revision H) Published November 2011 www.ruckuswireless.com Contents 1 About This Installation
More informationAC750 WiFi Range Extender Model EX6100 User Manual
AC750 WiFi Range Extender Model EX6100 User Manual January 2014 202-11307-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device,
More informationAC1900 WiFi Mesh Extender Essentials Edition
AC1900 WiFi Mesh Extender Essentials Edition Model EX6400 User Manual July 2018 202-11611-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can
More informationAC1200 WiF Range Extender
Model EX6150 User Manual September 2016 202-11410-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationZavio P5111/ P5116/ P5210 Quick Installation Guide
86085M2000010 Zavio P5111/ P5116/ P5210 Quick Installation Guide Installation Steps Please follow the installation steps below to set up your P5111 / P5116/ P5210 Day/Night Pan/Tilt IP Camera. Check the
More informationBIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router with 4-port 10/100M Switch Quick Start Guide
BIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router with 4-port 10/100M Switch Quick Start Guide Billion BIPAC-6500 / 6500W (Wireless) Broadband VPN Firewall Router For more detailed instructions
More informationDual Band ac PoE AP
MLB-G4301 Dual Band 802.11 ac PoE AP USER MANUAL Information provided by Schmidt & Co., (HK) Ltd, (herein known as the company ), is believed to be accurate and reliable. However, the company assumes no
More information8-Port Gigabit Ethernet Smart Managed Plus Switch with Integrated Cable Management User Manual
8-Port Gigabit Ethernet Smart Managed Plus Switch with Integrated Cable Management User Manual Model GS908E November 2017 202-11807-02 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for
More informationPePWave Mesh Connector User Manual
PePWave Mesh Connector User Manual Document Rev. 1.0 Jun-07 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. Copyright 1999-2007 PePWave Ltd. All Rights Reserved. PePWave and
More informationQuick Installation Guide
Quick Installation Guide WAP-PC1200C AC1200 Ceiling Mount Access Point Version AV2.1c June 22, 2017 I I. Product Information I-1. Package Contents 1 2 3 4 5 1. Access Point 2. Ceiling Mount Bracket 3.
More informationRuckus Wireless ZoneFlex Indoor Access Point. Release 9.3 User Guide
Ruckus Wireless ZoneFlex Indoor Access Point Release 9.3 User Guide For the following indoor ZoneFlex AP models: ZoneFlex 2942 802.11g Access Point ZoneFlex 7942 802.11n Access Point ZoneFlex 7962 Dual
More informationInternet Telephony Gateway VGW-402 / VGW-400FS / VGW-400FO. Quick Installation Guide
Internet Telephony Gateway VGW-402 / VGW-400FS / VGW-400FO Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Installation... 4 2.1 Safety Instructions... 4 2.2 Physical Introduction...
More informationInstallation and Configuration Guide
Installation and Configuration Guide Trademark Notices Comtrol, NS-Link, and DeviceMaster are trademarks of Comtrol Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation.
More information8-Port Gigabit Ethernet Smart Managed Plus Switch with 2-Port 10G/Multi-Gig Uplinks User Manual
8-Port Gigabit Ethernet Smart Managed Plus Switch with 2-Port 10G/Multi-Gig Uplinks User Manual Model GS110EMX December 2017 202-11810-03 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you
More informationTroubleshooting 1240AG Series Lightweight Access Points
CHAPTER 4 Troubleshooting 1240AG Series Lightweight Access Points This chapter provides troubleshooting procedures for basic problems with the 1240AG series lightweight access point (AIR-LAP1242AG or AIR-LAP1242G).
More informationOrbi Outdoor Satellite User Manual
User Manual Model RBS50Y January 2018 202-11831-01 350 E. Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationUser Guide Supplement Measurement Systems International
MSI-9850 Ethernet Option User Guide Supplement Measurement Systems International Integrated System Solutions for Industrial Weighing and Process Control Table of Contents Introduction...4 Quick Start...4
More informationHPE FlexNetwork NJ5000 5G PoE+ Walljack Switch(JH237A)
HPE FlexNetwork NJ5000 5G PoE+ Walljack Switch(JH237A) Quick Start Guide 5998-7330R The information in this document is subject to change without notice. Copyright 2016 Hewlett Packard Enterprise Development
More informationUser Manual of NC-AC44APP/NC-AC21AP
User Manual of NC-AC44APP/NC-AC21AP Version V1.0 Thank you for purchasing NC-Link Access Point. This manual will instruct you how to configure and the AP, enable you to use it in a perfect status. Please
More informationCisco 200 Series Smart Switches. Quick Start Guide
Cisco 200 Series Smart Switches Quick Start Guide Welcome Thank you for choosing the Cisco 200 Series Smart Switch, a Cisco network communications device. This device is designed to be operational right
More informationWireless Access Point
802.11g / 802.11b / WPA Wireless Access Point User's Guide TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 1 Features of your Wireless Access Point... 1 Package Contents... 4 Physical Details... 4 CHAPTER
More informationLED Indicators on the Device. No LED State Description. No power to AP. Green On
SP220-C02 802.11ac Outdoor Access Point Quick Setup Guide This Quick Setup Guide provides step-bystep instructions on how to set up your Outdoor Access Point. After completing the steps described in this
More informationHigh Speed Cable Modem
Model CM1000 User Manual September 2017 202-11804-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register
More informationHigh Speed Cable Modem
High Speed Cable Modem Model CM400 User Manual September 2017 202-11412-03 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support
More informationCisco Aironet 1815T (Teleworker) Access Point Deployment Guide
Cisco Aironet 1815T (Teleworker) Access Point Deployment Guide First Published: 2017-08-18 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com
More informationQuick Installation Guide
Quick Installation Guide DL-200 Cellular Data logger V1.2_201610 TABLE OF CONTENTS CHAPTER 1 INTRODUCTION... 4 1.1 CONTENTS LIST... 5 1.2 HARDWARE INSTALLATION... 6 1.2.1 WARNING... 6 1.2.2 SYSTEM REQUIREMENTS...
More informationZN-7100-DE500-G V ac Wireless Access Point Quick Setup Guide
Bottom View ZN-7100-DE500-G V4 802.11ac Wireless Access Point Quick Setup Guide This Quick Setup Guide provides step-bystep instructions on how to set up your ZN- 7100-DE500-G V4 Wireless Access Point.
More informationAOS-W 3.1. Quick Start Guide
AOS-W 3.1 Quick Start Guide This document describes the initial setup of an Alcatel OmniAccess system that consists of a WLAN Switch and Alcatel Access Points (APs). The installation consists of the following
More informationAirServer Connect User Guide
1 Contents Welcome... 3 Unique features... 3 Set up your AirServer Connect... 4 The Home Screen... 5 Navigating Menus... 5 Configuring Basic Settings... 6 Screen Mirroring Methods... 7 Airplay... 7 Mac...
More informationIP806GA/GB Wireless ADSL Router
IP806GA/GB Wireless ADSL Router 802.11g/802.11b Wireless Access Point ADSL Modem NAT Router 4-Port Switching Hub User's Guide Table of Contents CHAPTER 1 INTRODUCTION... 1 Wireless ADSL Router Features...
More informationInTemp CX5000 Gateway Manual
InTemp CX5000 Manual The InTemp CX5000 is a device that uses Bluetooth Low Energy (BLE) to regularly download up to 50 CX series loggers and upload the data to the InTempConnect website automatically via
More informationBiPAC 7402R2. ADSL2+ VPN Firewall Router. Quick Start Guide
BiPAC 7402R2 ADSL2+ VPN Firewall Router Quick Start Guide Billion BiPAC 7402R2 ADSL2+ VPN Firewall Router For more detailed instructions on configuring and using the ADSL2+ VPN Firewall Router, please
More informationTitle LAN Printer Setup User s Manual. Date. Rev /09/2005. LAN Printer Setup. User s Manual. Lan Printer Setup.doc
2/14 Contents 1. INTRODUCTION...3 1.1. Document releases... 3 1.2. Reference documents... 3 1.3. Conventions... 3 2. ARCHITECTURE...4 3. LAN PRINTER CONFIGURATION...5 4. RESTORE FACTORY SETTINGS... 13
More informationUser Manual. 300Mbps Long Range Wireless N Ceiling Mount AP
User Manual 300Mbps Long Range Wireless N Ceiling Mount AP Table of Contents Chapter One Product Overview...2 1.1 Features... 2 1.2 Specifications... 2 Chapter Two Product Installation...3 2.1 Product
More informationQuick Start. N300 WiFi Range Extender Model WN3100RPv2
Quick Start N300 WiFi Range Extender Model WN3100RPv2 Getting Started The NETGEAR WiFi Range Extender increases the distance of a WiFi network by boosting the existing WiFi signal and enhancing the overall
More informationAdd a Wireless Network to an Existing Wired Network using a Wireless Access Point (WAP)
Add a Wireless Network to an Existing Wired Network using a Wireless Access Point (WAP) Objective A Wireless Access Point (WAP) is a networking device that allows wireless-capable devices to connect to
More informationGigabit SSL VPN Security Router SG-4800
Gigabit SSL VPN Security Router SG-4800 Quick Installation Guide Table of Contents 1. Package Contents... 3 2. Hardware Installation... 4 2.1 Safety Instruction... 4 2.2 Front panel... 4 2.3 LED & Button
More informationRadiolabs Bridge in a Box Setup
Radiolabs Bridge in a Box Setup This manual will guide you through creating a point-to-point bridge using your Radiolabs equipment. Step 1: Preparing for setup. To set the bridge up, start by unboxing
More informationAOS-W 6.4. Quick Start Guide. Install the Switch. Initial Setup Using the WebUI Setup Wizard
AOS-W 6.4 Quick Start Guide This document describes the initial setup of an Alcatel-Lucent user-centric network that consists of an Alcatel-Lucent switch and Alcatel-Lucent Access Points (APs). The installation
More informationJNR1010v2 N150 Wireless Router User Manual
User Manual January 2014 202-11340-02 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label
More informationRapidlogger Systems. EnGenius ENS202EXT Access Point
EnGenius ENS202EXT Access Point This tech note describes how to setup the EnGenius Wi-Fi access point and connect it with the Rapidlogger System. This will allow you to wirelessly communicate between your
More informationTroubleshooting Autonomous Access Points
CHAPTER 3 This chapter provides troubleshooting procedures for basic problems with the autonomous access point (model: AIR-AP1131AG or AIR-AP1131G). For the most up-to-date, detailed troubleshooting information,
More informationMDNET-5W. Wi-Fi/Ethernet/RS485 Converter Operation Manual. Version /03/24
MDNET-5W Wi-Fi/Ethernet/RS485 Converter Operation Manual Version 01.00 2016/03/24 I. Features & Specification Features: Connect RS485 devices to Ethernet or Wi-Fi network Connect Ethernet device to Wi-Fi
More informationBIPAC-5100 / 5100W (Wireless) ADSL Router
BIPAC-5100 / 5100W (Wireless) ADSL Router Quick Start Guide Billion BIPAC-5100 / 5100W ADSL Router For more detailed instructions on configuring and using the (Wireless) ADSL Firewall Router, please refer
More informationMcAfee Network Security Platform
40 Gigabit Active Fail-Open Bypass Kit Guide Revision C McAfee Network Security Platform This document describes the contents and how to install and use the McAfee 40 Gigabit Active Fail-Open Bypass Kit
More informationEdgeMarc 4552 Networking Gateway
EdgeMarc 4552 Networking Gateway Quick Start Guide Version 1.0 Page 1 of 7 201-4552-001 Before You Start Please read this guide thoroughly as it describes the basic installation of the device. Additional
More informationTEW-211BRP. Wireless AP Router. User s Manual
TEW-211BRP Wireless AP Router User s Manual Version 1.4 - Jan 2002 CONTENTS Introduction...3 Hardware Installation...5 General Wireless AP Router System Connection...6 Wireless AP Router Default Settings
More informationPremiertek AP Mbps Wireless-N Broadband Router Quick Installation Guide
Premiertek AP2402 150Mbps Wireless-N Broadband Router Quick Installation Guide V1.0.8.11 1. Check Your Package Contents The following items should be found in your package: 150Mbps Wireless-N Broadband
More informationRuckus Wireless ZoneFlex 2925/2942/7942/7962 Access Point. User Guide. Part Number Published March
Ruckus Wireless ZoneFlex 2925/2942/7942/7962 Access Point User Guide Part Number 800-70212-001 Published March 2009 www.ruckuswireless.com Contents About This Guide Document Conventions.................................................
More informationDo More. Nighthawk X6S AC3000 Tri-Band WiFi Range Extender. Model EX8000
Do More Nighthawk X6S AC3000 Tri-Band WiFi Range Extender Model EX8000 Use the Extender in Access Point Mode You can set up your extender as a WiFi access point. Tri-band WiFi is available when your extender
More informationBiPAC 5200 Series. (802.11g) ADSL2+ Modem/Router. Quick Start Guide
BiPAC 5200 Series (802.11g) ADSL2+ Modem/Router Quick Start Guide Billion BiPAC 5200 Series ADSL2+ Modem/Router For more detailed instructions on configuring and using the (802.11g) ADSL2+ Modem/Router,
More informationNighthawk X4S AC2600 Smart WiFi Router Model R7800. Package Contents. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA USA.
Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We
More informationAirCruiser G Wireless Router GN-BR01G
AirCruiser G Wireless Router GN-BR01G User s Guide i Contents Chapter 1 Introduction... 1 Overview...1 Features...1 Package Contents...2 AirCruiser G Wireless Router Rear Panel...2 AirCruiser G Wireless
More informationTroubleshooting Lightweight Access Points
CHAPTER 4 This chapter provides troubleshooting procedures for basic problems with the 1130AG series lightweight access point (model: AIR-LAP1131AG or AIR-LAP1131G). For the most up-to-date, detailed troubleshooting
More information