EEM012-MFM Specification

Size: px

Start display at page:

Download "EEM012-MFM Specification"

Amber Wilcox
5 years ago
Views:

1 * EEM012-MFM EEM012-MFM Specification - Optical 12X ZOOM and manual FOCUS motor control module EEM012-MFM is a module that controls the zoom and focus motor manually. With its compact design. Key Features Fast manual Focus with continuous tracking Built-in DC Auto Iris with IR cut Filter conversion system Control using RS232 ADC Interface for external control of zoom motor and focus motor DC12V Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

4 * EEM012-AFM EEM012-AFM Specification - Optical 12X ZOOM and AUTO FOCUS motor control module EEM012-AFM is a module that controls the zoom and focus motor automatically. With its compact design. Key Features Fast auto Focus with continuous tracking Built-in DC Auto Iris with IR cut Filter conversion system Control using RS232 ADC Interface for external control of zoom motor and focus motor The I2C interface is used to accept and process the Auto Focus data. It is the same as hardware EEM012-MFM. DC12V Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

7 * EEM012-BT1120 EEM012-BT1120 Specification - FULL HD 12xZoom SMART FOCUS BT1120 output format vision Camera EEM012-HDSDI is an BT1120 output format vision camera. With its compact design. Key Features Uncompressed high quality FULL HD video with 60 frame rate Supported DIS(Digital Image Stablizer)System Fast Auto Focus with continuous tracking Patented intelligent IR protection technology Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE) AWB(Automatic White Balance) AE(Automatic Exposure) BLC(Back Light Compensation) DFC(Defective Pixel Correction) on the fly Remote lens control via standard controller (RS232) HD video transmission up to 100M Sony 1/2.8 IMX-291 CMOS, 2Megapixel Up to 1920X f resolution Built-in DC Auto Iris with IR cut Filter conversion system Composite video output for instant camera test or for conventional use with SD DVR 2D/3D DNR (Digital Noise Reduction),Optical zoom, Digital zoom,wide Dynamic Range(WDR) ADC Interface for external control of OSD (Using controllers, etc. ) DC12V Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

8 EEM012-BT1120 Specification Specification for Camera MODEL Sensor Device Total Pixels Effective Pixels Scanning System Horizontal S/N Ratio Shutter Speed Video Output AV Output Output Format Day & Night Serial Port Lens Control 2D/3DNR Power Source OSD EEM012-BT1120 Sony IMX291 1/2.8 progressive scan CMOS, 2Megapixel 1945(H) x 1109(V) 2.16 Megapixel 1945(H) x 1097(V) 2.13 Megapixel Progressive Scan 800TVL More than 50dB (AGC Off) 1/30s Default,(Long Exposure Mode, ~1Sec) 1280 x F, 1920 x F, 1920 x P (Mode Select) 1V p-p Composite. 75 Ohms BT bit (YUV422) IR CUT Filter Conversion System RS232 Motorized Lens Control by stepping Motor. (Simplified Adjustment) Off / On (User selectable by OSD) DC 12V Video Mode / D&N / AWB / AE / Flickerless /DIS Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc. Ambient Temperature -10ºC ~ 50ºC Specifications are apt to change without prior notice to enhance quality and performance. Specification for Lens MODEL Fno EEM012-HDSDI F2.2(Wide) ~ F2.3(Tele)) Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x) Focusing Range Field Of View (Degree) 10cm(Wide) ~ 1M(Tele) Wide : 71.7(D), 64.2(H), 37.5(V) Tele : 6.7(D), 5.9(H), 3.3(V) Relative Illumination More than 50% Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

10 * EEM012-HDSDI EEM012-HDSDI Specification - FULL HD 12xZoom SMART FOCUS HD-SDI vision Camera EEM012-HDSDI is an HD-SDI vision camera. With its compact design. Key Features Uncompressed high quality FULL HD video with 60 frame rate Support Built-in HD-SDI TX(270M/1.485G/2.97G) Embedded EX-SDI Encoder (Long Reach, about 500M) Supported DIS(Digital Image Stablizer)System Fast Auto Focus with continuous tracking Patented intelligent IR protection technology Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE) AWB(Automatic White Balance) AE(Automatic Exposure) BLC(Back Light Compensation) DFC(Defective Pixel Correction) on the fly Remote lens control via standard controller (RS232) HD video transmission up to 100M Sony 1/2.8 IMX-291 CMOS, 2Megapixel Up to 1920X f resolution Built-in DC Auto Iris with IR cut Filter conversion system Composite video output for instant camera test or for conventional use with SD DVR 2D/3D DNR (Digital Noise Reduction),Optical zoom, Digital zoom,wide Dynamic Range(WDR) ADC Interface for external control of OSD (Using controllers, etc. ) DC12V Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

11 EEM012-HDSDI Specification Specification for Camera MODEL Sensor Device Total Pixels Effective Pixels Scanning System Horizontal S/N Ratio Shutter Speed Video Output Video Output Format AV Output Digital Output Day & Night Serial Port Lens Control 2D/3DNR Power Source OSD EEM012-HDSDI Sony 1/2.8 progressive scan CMOS, 2Megapixel 1945(H) x 1109(V) 2.16 Megapixel 1945(H) x 1097(V) 2.13 Megapixel Progressive Scan 800TVL More than 50dB (AGC Off) 1/30s Default,(Long Exposure Mode, ~1Sec) 1280 x F, 1920 x F, 1920 x P (Mode Select) 1.485G/s, HD-SDI Output (SMPTE 292M),or EX-SDI 1V p-p Composite. 75 Ohms SDI Output IR CUT Filter Conversion System RS232 Motorized Lens Control by stepping Motor. (Simplified Adjustment) Off / On (User selectable by OSD) DC 12V Video Mode / D&N / AWB / AE / Flickerless /DIS Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc. Ambient Temperature -10ºC ~ 50ºC Specifications are apt to change without prior notice to enhance quality and performance. Specification for Lens MODEL Fno EEM012-HDSDI F2.2(Wide) ~ F2.3(Tele)) Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x) Focusing Range Field Of View (Degree) 10cm(Wide) ~ 1M(Tele) Wide : 71.7(D), 64.2(H), 37.5(V) Tele : 6.7(D), 5.9(H), 3.3(V) Relative Illumination More than 50% Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

14 * EEM012-USB2.0 EEM012-USB2.0 Specification - FULL HD 12xZoom SMART FOCUS USB2.0 vision Camera EEM012-USB2.0 is an USB2.0 vision camera. With its compact design. Key Features commpressed MJPEG FULL HD video with 30 frame rate Supported DIS(Digital Image Stablizer)System Fast Auto Focus with continuous tracking Patented intelligent IR protection technology Contrast Enhancement ( Local Exposure ),Adaptive Contrast Enhancer(ACE) AWB(Automatic White Balance) AE(Automatic Exposure) BLC(Back Light Compensation) DFC(Defective Pixel Correction) on the fly Remote lens control via standard controller (RS232) Sony 1/2.8 IMX-291 CMOS, 2Megapixel Up to 1920X f resolution Built-in DC Auto Iris with IR cut Filter conversion system Composite video output for instant camera test or for conventional use with SD DVR 2D/3D DNR (Digital Noise Reduction),Optical zoom, Digital zoom,wide Dynamic Range(WDR) ADC Interface for external control of OSD (Using controllers, etc. ) Available USB2.0 (500mA/port) for power specification, but should connect with USB3.0 port (1A/port) or 2 lines of USB2.0 port at the same time for stable control. DC12V Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

15 Specification for Camera EEM012-USB2.0 Specification MODEL Sensor Device Total Pixels Effective Pixels Scanning System Horizontal S/N Ratio Shutter Speed Video Output Video Output Format AV Output ISP output Format USB Chip Operating PC spec Day & Night Serial Port Lens Control 2D/3DNR Power Source OSD EEM012-USB2.0 Sony 1/2.8 progressive scan CMOS, 2Megapixel 1945(H) x 1109(V) 2.16 Megapixel 1945(H) x 1097(V) 2.13 Megapixel Progressive Scan 800TVL More than 50dB (AGC Off) 1/30s Default,(Long Exposure Mode, ~1Sec) 1920 x F Compressed MJPEG 1V p-p Composite. 75 Ohms YUV 4:2:2 16bit (BT1120,16bit) EM27386D, Not supported UVC, How to control form Windos OS, directdraw Current is over the 700mA, OS : Win7SP1 up, CPU :Core i3 up, RAM: 4GB up, With stand alone VGA card well be better. IR CUT Filter Conversion System RS232 Motorized Lens Control by stepping Motor. (Simplified Adjustment) Off / On (User selectable by OSD) DC 12V Video Mode / D&N / AWB / AE / Flickerless /DIS Brightness / Sharpness / Mirror & Flip / DSS/DNR, etc. Ambient Temperature -10ºC ~ 50ºC Specifications are apt to change without prior notice to enhance quality and performance. Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

16 Specification for Lens EEM012-USB2.0 Specification MODEL Fno EEL005 F2.2(Wide) ~ F2.3(Tele)) Effective Focal Length F=4.8 ~ 57.6mm (Zoom Ration = 12x) Focusing Range Field Of View (Degree) 10cm ~ (Wide), 1M ~ (Tele) Wide : 71.7(D), 64.2(H), 37.5(V) Tele : 6.7(D), 5.9(H), 3.3(V) Relative Illumination More than 50% Copyright 2013 OPTOLOGICS Co., Ltd. All Rights Reserved opto@optologics.com

18 CL0201F 12xZoom Lens Specification CL0201F 12xZoom Lens Specification Version: CL0201F Ver1.0 Date : 09. August Product Name Model Name Product Code CL0201F Release Checked Approval Anyang-dong Manan-gu Anyang-city Gyeonggi-do Korea Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 1

21 CL0201F 12xZoom Lens Specification 2. Product Outline 2-1. Coverage These specifications specify the delivery specification of 12xZoom Lens Unit (CL0201F) supplied by OPTOLOGICS Co., Ltd. - CL0201F is for auto focus function of 1/3 inch CMOS color video camera. - CL0201F contains auto iris with IR cut filter Change in specification Customer and OPTOLOGICS Co.,Ltd. contact promptly the other party side. As the both parties come true conference agreement, execute the revision specification when the necessity of the specification change is caused. Moreover, when a problem arises under the matter which is not defined as these specification, it talks and acts over sincerity each other prudently. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 4

22 CL0201F 12xZoom Lens Specification 3. Performance 3.1 General Specification No Items Description 1 Sensor 1/3 inch CMOS & CCD 2 Sensor Image Circle Sensor Effective Image Circle : Ф6.0 mm 3 Focal Length 5.2~58.8 ±8% (Zoom Ratio : 12) 4 Aperture Ф7.2 mm 5 Focus Range 20cm (Wide) ~ 1m (Tele) 6 Fno F/1.6 ~ F/3.0(Object distance: infinity) 7 Relative Illumination Wide : >50%, Tele : >43% 8 TV Distortion Wide : -3.0%, Tele : +0.3% 9 Optical Total Track mm (in air) 10 Flange Back Length -0.31mm 11 Field Of View Diagonal: 64.1 (Wide) ~ 5.8 (Tele) Horizontal: 51.3 (Wide) ~ 4.64 (Tele) Vertical: 38.5 (Wide) ~ 3.48 (Tele) 12 IR Cut Filter Driving by IR cut filter actuator 13 Barrel Size Ф36.0 x L68.73(TTL) 3.2 Test Conditions Without any special explanation, please conduct testing under the following conditions. 1) Temperature & humidity Temperature : 20±5 Humidity:50±5%(relative humidity) 2) Driving Voltage : 4.5 ~ 5V (with Power Supply) 3) Visual confirmation In the natural light or daylight within the range of 750~1500 lx, please make visual confirmation in the distance of 25~30cm. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 5

23 CL0201F 12xZoom Lens Specification 3.3 Appearance General Appearance 1) Any clear stain, dirt, sweat mark, flow mark, gap are not allowed to show in the appearance of lens completion. 2) Any clear scar caused by flash or burr are not allowed to appear in the revealing parts of lens completion products. 3) Any breakage & adherent particles are not allowed. 4) Appearance limit sample can be produced in accord with requirements Step/Gap 1) Step:below 0.2mm Gap:below 0.2mm 2) Limit sample can be produced in accord with requirements Assembly 1) It should not be allowed neglected and mistaken assembly, exceptional looseness, abnormal sounds in vibrating the lens 2) Limit sample can be produced in accord with requirements Lens Appearance 1) It should not be allowed apparent fingerprint, dirt, clear split, scratch 2) It should not be allowed dirt that would cause damage to images 3) It should not be allowed lens tilting, dropping etc. 4) Limit sample can be produced in accord with requirements. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 6

24 CL0201F 12xZoom Lens Specification 3.4 Optical Performance 1) Focal Length Wide:5.2±8%mm Tele:58.8±8%mm 2) Fno. Wide:1.6±8%mm Tele:3.0±8%mm 3) Back Focal Length Wide = 9mm, Tele =6.9mm (In Air) 4) Flange Back Length : -0.31mm 5) Focus Length Wide : 0.2m~INF (From the 1 st surface of G1 lens) Tele : 1.0m~INF (From the 1 st surface of G1 lens) 6) Lens Composition : 4Groups 10Elements 7) Injection Position Wide : , Tele : ) Rear Projection Resolution * Measurement condition Wide : Object distance -- 1m, Aperture : Fno 1.6 Tele : Object distance - 4 m, Aperture : Fno 3.0. * Measurement method:focus is adjusted to get the greatest contrast on the center point. * Specification Wide Tele On Axis 200lp/mm 160lp/mm 0.7F 125lp/mm 125lp/mm 9) Distortion * Wide : less than ± 3.0% (at 1.0m), Tele : less than ± 1.0% (at 3.0m) Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 7

CL0201F 12xZoom Lens Specification DIST H H 100(%) * Measurement on the

condition with fully opened iris & focus adjusting, assumed that on axis

0F) apart from axis shall satisfy the below value in the table.

0F Wide More than 50 % Tele More than 43 % 11) Spectral Transmission Day Mode

25 CL0201F 12xZoom Lens Specification DIST H H 100(%) * Measurement on the projection screen is as follow 10) Relative Illumination Ratio When the condition with fully opened iris & focus adjusting, assumed that on axis illumination is 100%, illumination of image corner for 3.0mm (1.0F) apart from axis shall satisfy the below value in the table. Zoom Position Illumination 1.0F Wide More than 50 % Tele More than 43 % 11) Spectral Transmission Day Mode Night Mode Wave Length 440 nm 550 nm 650 nm 850 nm Transmission Over 65% Over 85% Over 80% Over 45% Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 8

26 CL0201F 12xZoom Lens Specification 12) Flare, Ghost The limited sample would be established at need. 13) Dust Inspection a) Inspection Condition The lens module would be inspected with human eye under the light box at Wide and full opened iris after cleaning on the surface of 1st & last lens. b) The limited sample would be established at need. 14) Punt Adjustment The detailed punt is measured by collimator at Wide, Tele. The punt condition is the infinite object position. 15) Optical Image Circle - more than Φ6.4mm (designed value) 16) Internal Reflection The limited sample would be established at need. 17) Focal Position [Adjusting condition] The focal position variation shall be within ±0.85mm including the tolerance of sensor position and Cover Glass thickness. Sensor & Dummy Glass Punt tolerance = ±0.05 Lens Punt adjusting tolerance = ± ) Eccentricity of Image center There is no problem in practical use for the eccentricity of image center. within 5.0% of diagonal size of Sensor image (Φ6.0) (The center position will be decided at Tele, and verify at Wide) 19) Image Shaking 1) There is no problem in practical use for the image shaking during zooming & focusing. 2) The limited sample would be established at need. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 9

27 CL0201F 12xZoom Lens Specification 3.5 Zoom Tracking 1) Zoom tracking is working with direction of Close Wide Tele. 2) The Close position is defined as the stopping position after (+10) pulse count of Zoom motor,(+10) pulse count of AF motor after P.I signal changing detection. This value would be adjustable in E 2 PROM. 3) The Wide position is defined as the stopping (sudden stop) position of (-1098) pulse count of Zoom motor, (-85) pulse count of AF motor after Photo-Interrupter signal changing detection. 4) The Tele position is defined as the stopping position of (+80) pulse count of Zoom motor, (+117) pulse count of AF motor after Photo-Interrupter signal changing detection. 5) The Wide Tele position is defined as the zoom & AF lens position according to count of Zoom & AF motor pulse. 6) Pulse Diagram ** Zoom Pulse Diagram Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 10

28 CL0201F 12xZoom Lens Specification ** AF Pulse Diagram 3.6 Mechanical / Electrical Specifications Zoom & Focus Motor 1) Drive the 2 & 4 group lenses through driving of the stepping motor lead screw. 2) Motor Specification 1 Motor Type : PM type Stepping motor, Φ10 & M2xP0.4 2 Excitation system : 2phase excitation bipolar 3 Basic step angle : 18 /1pulse ( 20pulse/ 1rev 2 phase excitation) 4 Coil resistance : 55Ω/phase ± 10% 5 Working voltage range : 4.5V ~ 5.0V 6 Unit movement Zoom Motor = 0.02mm/pulse (2-2 phase excitation) Focus Motor = 0.01mm/pulse (1-2 phase excitation) 3) Motor driving condition 1 Rated voltage : 5V ± 0.2V (Terminal Voltage) 2 Driving system Zoom Motor : 2-2 Phase Driving, AF Motor : 1-2 Phase Driving 3 Driving PPS range : 400 ~ 700 PPS 4) Moving accuracy (Horizontal) - In case of N step moving in any focus range with (400 ~ 700) PPS, the actual moving amount X shall satisfy the below equation. Zoom Motor : X = 0.02 N ± 0.04mm (±2 pulse) Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 11

2 IR Cut Filter Driving System IR-Cut Filter : Thickness of material t=0.1mm; Drive coil : 240Ω±10% at 20 IR Filter In Out : 3.5V/20, IR Filter Out In : -3.5V/20 3.6.

29 CL0201F 12xZoom Lens Specification Focus Motor : X = 0.01 N ± 0.02mm (±2 pulse) 5) Driving error frequency - There is no driving error with (400 ~ 700) PPS operating in the condition of motor terminal voltage 5V ± 0.2V including temperature condition IR Cut Filter Driving System IR-Cut Filter : Thickness of material t=0.1mm; Drive coil : 240Ω±10% at 20 IR Filter In Out : 3.5V/20, IR Filter Out In : -3.5V/ Auto IRIS Driving System 1) Composition :2 blades aperture, Φ10.0mm galvanometer 2) Operating : The aperture is controlled by output signal of hall element with damping coil. (The iris shall be closed when there is no signal). 3) Electrical characteristic Drive Coil Resistance : 190Ω±10%, 20 Damping Coil Resistance : 465Ω±10%, 20 4) Open/Close It shall be opened at Max. 3.5V and closed at Min. 0.5V in all position and under high/low temperature. When positive voltage is applied to the positive pole of the drive, the aperture shifts to the open position. 5) ND filter (nd=1.2) : Transmittance is 6.3%. 6) Hall element type: HG-166A (ASAHI-KASEI) 7) Max Input Voltage : 4.0V 8) Output Specification of hall element Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 12

Aperture Hall out Diameter Aperture Hall out (mm) area(mm 2 ) (mv) (mm) area (mm 2 ) (mv) Mech-open

30 CL0201F 12xZoom Lens Specification Design value of hall element output (TBD) Fno Hall output (Without ND filter) Wide Tele Diameter Aperture Hall out Diameter Aperture Hall out (mm) area(mm 2 ) (mv) (mm) area (mm 2 ) (mv) Mech-open Optical open F1.6 F2.0 F2.4 F2.8 F3.0 F3.8. F4.8 F5.6 F6.8 F8.0 F9.6 F11.0 F14.0 F16.0 F19.0 F22.0 F28.0 Optical close Mech-close Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 13

31 CL0201F 12xZoom Lens Specification Zoom & Auto Focus Photo-Interrupter Signal Specification - Maker : Sharp GP1S093HCZ0F Zoom & Auto Focus Motor Terminal Order (Zoom Motor : 2-2 Phase Driving) Rotational direction of STM (CW - CCW) Pin B H H L L B- L L H H A- L H H L A H L L H (Focus Motor : 1-2 Phase Driving) Rotational direction of STM (CW - CCW) Pin B L H H H L L L L B- L L L L L H H H A- L L L H H H L L A H H L L L L L H Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 14

32 CL0201F 12xZoom Lens Specification Zoom & Focus Working Noise As a rule, the test should be carried out on the packaged unit. There is under 35 db in the below condition. - Distance : 100mm from Camera - Background Noise : 20 db There is no problem in practical use with Movie Mode. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 15

33 CL0201F 12xZoom Lens Specification FPCB Connecting Wire 1) Type : 0.5mm Pitch FPC Connector (26 Pin) 2) FPCB Pin Assignment Pin Description Poles 1 STM A+ 2 STM B- Focus Motor 3 STM A- 4 STM B+ 5 IR Cut +(OUT) IR Cut Filter Actuator 6 IR Cut -(IN) 7 Anode 8 Collector Focus Photo Interrupter 9 Collector 10 GND (Common) 11 Damp (+) 12 Damp (-) 13 Drive (-) IRIS 16 Hall In (-) 17 Hall Out(-) 18 Drive (+) 19 Anode Zoom Photo Interrupter 22 GND (Common) 23 STM B+ Zoom Motor 26 STM A Hall In(+) Collector STM A Hall Out(+) Collector STM B- Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 16

CL0201F 12xZoom Lens Specification 3) Terminal

35 CL0201F 12xZoom Lens Specification 4. Reliability Test 4-1. All Sorts of Test - Testing with various samples of exclusive use Initial Performance Test - Testing at room temperature, normal humidity (20 ±5, 50%±5%) 4-3. Operating Climatic Test 1) Accuracy guaranteed range : -5 ~ +40, humidity 80% 2) Operating guaranteed range : -20 ~ +50, humidity 50% 4-4. High Temperature, High Humidity Storage - There is no problem in practical use at the validation in the below condition with packaged unit. : Storage 8H at room temperature after 48H storage with Temperature : +40, Humidity : 80% 4-5. Storage Temperature Test - There is no problem in practical use at the validation in the below condition with packaged unit. 1) Hot : Storage 8H at room temperature after 24H storage with Temperature +50, Humidity 50% 2) Cold : Storage 8H at room temperature after 24H storage with Temperature -20, Humidity 0% 4-6. Storage Low Humidity Test - There is no problem in practical use at the validation in the below condition with packaged unit. : Storage 8H at room temperature after 24H storage with Temperature : +20, Humidity : 10% 4-7. Temperature Cyclic Test - There is no problem in practical use with storage of 8H at room temperature after 2cycles with the below diagram. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 18

- Drop on the veneer board from 50cm height. - Direction : 6 surfaces (each 2 time, total 12 times) 4-9.

36 CL0201F 12xZoom Lens Specification 4-8. Package Drop Test When the test should be carried out on the packaged unit, there is no problem in practical use in the below condition. - Drop on the veneer board from 50cm height. - Direction : 6 surfaces (each 2 time, total 12 times) 4-9. Vibration Test When the test should be carried out on the packaged unit, there is no problem in practical use in the below condition. - Sweeping Frequency : 10 ~ 25Hz - Period : 2 minutes - Amplitude : 1.0 mm - Direction : X,Y,Z 3 directions (each 1 time, total 3times) - Test Time : 20 minutes for each direction Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 19

CL0201F 12xZoom Lens Specification 4-10.

motor) - More than 100,000 cycle at room

2) Focus motor (Stepping 3) IR Cut Filter

37 CL0201F 12xZoom Lens Specification Endurance Testing 1) Zoom motor (Stepping motor) - More than 100,000 cycle at room temperature. 2) Focus motor (Stepping motor) - More than 100,000 cycle at room temperature. 3) IR Cut Filter - IRCF operation cycle: Min. 100,000 cycles Operation condition : Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 20

38 CL0201F 12xZoom Lens Specification 4) Auto IRIS - Auto Iris operation cycle: Min. 300,000 cycles Operation condition: Secular Changing - There is no remarkable deterioration with performance in a secular changing of normal use and normal storage Electrostatic Destruction Test - Consider a counterplan with an additional deliberation when becoming an issue. Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 21

40 CL0201F 12xZoom Lens Specification 6. Locus Table * Driving Condition : Zoom Motor Phase driving, Unit Step : 0.02mm : Focus Motor Phase driving, Unit Step : 0.01mm No Zoom Position EFFL Iris Size Zoom Step Count focus step number 10m 5m 3m 1.5m 1m 0 M-Stop X Copyright 2011 OPTOLOGICS Co., Ltd. All Rights Reserved. 23

46 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec APPROVAL SHEET Product Name Model Name Customer CCTV 12x Zoom Lens EEL005D APPROVAL 1 / 26

47 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Revision Histories Product Specification ~ Pin Description ~ Outline Dimensions ~ Reliability Test Specification ~ 25 2 / 26

48 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec [Revision Histories] Date Revision Description Initiator First Release CS. Jung Revision(Page 4,5,6,7,8,9,19) SH. Lee Revision (Page 11, 12,21) SH. Lee Revision (Page 16, 17,18, 19) SH. Lee Revision (Page 17) SH. Lee Revision (Page 4) SH. Lee ICF Motor has changed to DC Motor Revision (Page 14, Page 17) PI Sensor has changed to Sharp from Kodenshi (Page 10) SH. Lee SH. Lee 3 / 26

49 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Preface This document is for 12x Zoom Lens Module using on 1/2.7" Image Sensor. * Image Sensor - Omnivision OV2715 : 1/2.7, 2.0Mega CMOS Sensor 1920(H) * 1080(V), 5.76mm(H)* 3.24mm(V), Pixel Size : 3um. 2. General Specification 2-1. Taking Lens specification (Nominal value) 1) F-number : 2.2 (Wide) ~ 2.3 (Tele) 2) Effective Focal Length : f = 4.8 ~ 57.6mm (Zoom ratio 12x) 3) Back Focal Length : 9.45mm (Wide,in air),10.3mm( Tele, in air) 4) Image Plane Position * OV2715 : -0.31mm (OLPF t=0.7mm + Cover Glass t=0.445mm) * IMX036 : -0.90mm (OLPF t=0.7mm + Cover Glass t=0.70mm) 5) Focusing Range : Wide 10cm ~, Tele 100cm ~ (from 1st Lens R1) 6) Field of View (unit : deg) Wide Tele Vertical Horizontal Diagonal ) Lens composition : 9 groups 11 elements (including 2 glass aspheric lenses) 8) Zoom Driving : Stepping Motor (Moving 2nd Group & 4th Group) 9) Focus Driving : Stepping Motor (Moving 4th Group) 10) Iris System : Auto Iris (Driven by Servo motor) Including ND iris 11) IR Cut Filter : Stepping Motor (On/Off type) 4 / 26

50 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Taking Lens Auto Focusing (AF) Mechanism 1) AF Method : TV-AF 2) AF Working Range : Infinity ~ MOD ( Minimum Object distance) 3. Performance 3-1. F-no F-no shall be within below range at Wide with fully opened iris, focus adjusting. Wide : 2.09 < Fno < 2.31 (±5% equivalent) Tele : 2.18 < Fno < 2.42 (±5% equivalent) Designed value is Wide : 2.3, Tele : Focal Length Focal length shall be within below range at Wide, Tele with focus adjusting. f W = 4.6 ± (0.23) mm (5%) f T = 55.2 ± (2.76) mm (5%) Designed value is Wide : 4.9, Tele : 55.7 Zoom magnification shall be within range of 12x ±5% 3-3. Focal Position [Adjusting condition] The focal position variation shall be within ±0.65mm including the tolerance of sensor position and IR-Filter or OLPF position. Sensor & IRF or OLPF Punt tolerance = ±0.05 Lens Punt adjusting tolerance = ± Eccentricity of Image center There is no problem in practical use for the eccentricity of image center. within 5.0% of diagonal size Φ 6.6 of Optical Effective Image Circle. (The center position will be decided at Tele, and verify at Wide) 5 / 26

51 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Image Shaking 1) There is no problem in practical use for the image shaking during Zooming 2) There is no problem in practical use for the image shaking during Focusing 3) The limited sample would be established at need Relative Illumination Ratio When the condition with fully opened iris, with focus adjusting, assumed that axis illumination is 100%, illumination of image corner for 2.64mm(0.8F) apart from axis shall satisfy the below value in the table. Zoom Position Illumination Ratio 0.6F 0.8F Wide More than 70% More than 50% Tele More than 70% More than 50% 3-7. MTF-Resolution When the condition with fully opened iris, with focus adjusting by operating focus motor so as to maximize the contrast for on-axis. Measurement distance is 1.0m (Wide), 5.0m (Tele): from screen to lens module (G1R1) Resolution Wide Tele On Axis 200 lps/mm 160 lps/mm 0.7 Field 125 lps/mm 100 lps/mm There is no problem in practical use in all the zoom position. 6 / 26

52 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Distortion 1) Wide : less than ± 2.5% at 1.0m, Tele : less than ± 1.0% at 5.0m ΔH H DIST 100(%) H 2) Measurement on the projection screen is as follow A ( B C) / 2 A DIST 100(%) 2A 3-9. Minimum Optical Effective Image Circle Minimum optical image size : Φ 6.8 (designed value) Internal Reflection The limited sample would be established at need Flare, Ghost The limited sample would be established at need. 7 / 26

53 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Spectral Transmission Wave Length 440 nm 550 nm 650 nm 850 nm Transmission Over 71% Over 76% Over 75% Over 60% Dust Inspection 1) Inspection Condition The lens module would be inspected with human eye under the light box at Wide and full opened iris after cleaning on the surface of 1st and last lenses. 2) Criterion for judging : The limited sample would be established at need Punt Adjustment The detailed punt is measured by collimator at Wide (± mm), Tele.(± mm), The punt condition is the infinite object position (Final product standard) Zoom Tracking Method 1) Zoom tracking is working with direction of Close Wide Tele 2) The Close position is defined as the stopping position after (-50) pulse count of Zoom motor, (-20) pulse count of AF motor after Photo-Interrupter signal changing detection. This value would be adjustable in E 2 PROM. 3) The Wide position is defined as the stopping (sudden stop) position of (+53) pulse count of Zoom motor, (+348) pulse count of AF motor after Photo-Interrupter signal changing detection. 4) The Tele position is defined as the stopping position of (-1037) pulse count of Zoom motor, (+430) pulse count of AF motor after Photo-Interrupter signal changing detection. 5) The Wide Tele position is defined as the zoom & AF lens position according to count of Zoom & AF motor pulse. 8 / 26

54 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Zoom & AF Pulse Diagram 9 / 26

55 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Zoom & Auto Focus Photo-Interrupter Specification 1) Maker : ROHM KIT-1019A 2) Electrical-Optical Characteristics 10 / 26

56 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Zoom Motor Specification 1) CCW rotation at the view of output spindle : from Wide to Tele 2) Terminal Order Terminal Name ZM-A H L L H ZM-B H H L L ZM-A' L H H L ZM-B L L H H 3) Electrical & Mechanical Characteristics - Type : PM type Stepping motor - Excitation system : 1-2phase excitation bipolar - Basic step angle : 18 /1pulse ( 20step/ rotation 2-2 phase excitation) - Coil resistance : 60Ω/phase ± 10% - Operating voltage : 4.0 ~5.5V - Unit Zoom Lens movement : ( 10 )um/pulse (1-2 phase excitation) 4) Motor driving condition - Rated voltage : (5.0)V ± 7% (Terminal Voltage) - Driving wave form : Sine wave (Micro Step),1-2phase - Driving PPS range : (0 ~ 1400) PPS 1-2 phase excitation 5) Moving accuracy (Horizontal) In case of N step moving in any focus range with (0 ~ 1400) PPS, the actual moving amount X shall satisfy the below equation. Backlash : X = ( 20 ) N um ± 40 um (±2 pulse) 6) Driving error frequency There is no driving error with (0 ~ 1400) PPS operating in the condition of motor terminal voltage (5.0)V ± 7% including temperature condition. 11 / 26

57 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Focus Motor Specification 1) CCW rotation at the view of output spindle : from Near to Far 2) Terminal Order Terminal Name AFM-A H L L H AFM-B H H L L AFM-A' L H H L AFM-B L L H H 3) Electrical & Mechanical Characteristics - Type : PM type Stepping motor - Excitation system : 1-2phase excitation bipolar - Basic step angle : 18 /1pulse ( 20step/ rotation 1-2 phase excitation) - Coil resistance : 60Ω/phase ± 10% - Operating voltage : 4.0 ~5.5V - Unit Focus Lens movement : ( 5 )um/pulse (1-2 phase excitation) 4) Motor driving condition - Rated voltage : (5.0)V ± 7% (Terminal Voltage) - Driving wave form : Sine wave (Micro Step), 1-2phase - Driving PPS range : (0 ~ 1400) PPS 1-2 phase excitation 5) Moving accuracy (Horizontal) In case of N step moving in any focus range with (0 ~ 1400) PPS, the actual moving amount X shall satisfy the below equation. Backlash : X = (10) N um ± 20 um (±2 pulse) 6) Driving error frequency There is no driving error with (0 ~ 1400) PPS operating in the condition of motor terminal voltage (5.0)V ± 7% including temperature condition. 12 / 26

58 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Auto IRIS Specification 1) Electrical & Mechanical Characteristics - Type : Servo motor - Structure : Damping coil, Drive Coil, ND filter, Aperture unit - Full Aperture : φ IRIS Blade : 2pcs (with ND filter) 1.25 ±0.2 2) ND filter Specification 1.25 ±0.2 - Density : ND-6.3B (SUMIMOTO) 3) Coil specification (20 ) Spec Turn Resistance Drive coil 3UEW, φ ±3 190Ω ± 10% Damping Coil 2UEW, φ ±5 850Ω ± 10% (Coil 465Ω + R 390Ω) 2) Driving Condition - Rated Voltage : (3.0)V, FPCB Terminal Voltage Drive Coil P (19) ( + ) ( - ) Open Drive Coil N (20) ( - ) ( - ) Close 13 / 26

59 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Day & Night Conversion system Motor Specification 1) IR Cut Filter Driving System IR-Cut Filter : Thickness of material t=0.3mm; Drive coil : 240Ω±10% IR Filter In Out : 5V, IR Filter Out In : -5V 2) Day & Night conversion - Day Mode : IR Cut Filter on - Night Mode : IR Cut Filter off 14 / 26

60 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Hall sensor Specification 15 / 26

61 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Working Noise 4-1. Zoom As a rule, the test should be carried out on the packaged unit. There is under ( 40 ) db in the below condition. - Distance : 50mm from Lens Top to Micro Phone - Background Noise : (20) db - Driving Method : Micro Step There is no problem in practical use with Movie Mode Focus As a rule, the test should be carried out on the packaged unit. There is under ( 40 ) db in the below condition. - Distance : 50mm from Lens Top to Micro Phone - Background Noise : (20) db - Driving Method : Micro Step There is no problem in practical use with Movie Mode Auto IRIS As a rule, the test should be carried out on the packaged unit. There is under ( 40 ) db in the below condition. - Distance : 50mm from Lens Top to Micro Phone - Background Noise : (20) db - Driving Method : Micro Step There is no problem in practical use with Movie Mode. 16 / 26

62 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec FPCB Pin description 5-1. Table of Pin Assignment Pin No Terminal name Description 1 ZPI_K Zoom Photo Interrupter Cathode 2 ZPI-E Zoom Photo Interrupter Emitter 3 PI_VCC Photo Interrupter VCC 4 ZM_AP ZM Motor A+ 5 ZM_AN ZM Motor A- 6 ZM_BP ZM Motor B+ 7 ZM_BN ZM Motor B- 8 FM_AP AF Motor A+ 9 FM_AN AF Motor A- 10 FM_BP AF Motor B+ 11 FM_BN AF Motor B- 12 PI_VCC Photo Interrupter VCC 13 FPI_K AF Photo Interrupter Cathode 14 FPI_E AF Photo Interrupter Emitter 15 ICF DC+ (Out) 16 ICF DC- (In) 17 NA NA 18 NA NA 19 IRIS_DRIVE_P AUTO IRIS Drive Coil + 20 IRIS_DRIVE_N AUTO IRIS Drive Coil - 21 IRIS_DAMP_P AUTO IRIS Damping Coil + 22 IRIS_DAMP_N AUTO IRIS Damping Coil - 23 HIN_N HALL IN - 24 HOUT_N HALL OUT - 25 HIN_P HALL IN + 26 HOUT_P HALL OUT + 17 / 26

Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec. 2014 5-2.

63 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec FPCB Connecting Wire B 5-3. FPCB Connector Information (TBD) 1) Type : 26pin, 0.5pitch Normal 2) Terminal Dimension C 18 / 26

64 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Outline Dimension 6-1 2D Drawing 19 / 26

65 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec IMX036 : -0.9mm OV2715 : -0.31mm 20 / 26

66 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec D Image 21 / 26

67 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Reliability Test 7-1. All Sorts of Test Testing with various samples of exclusive use Initial Performance Test Testing at room temperature, normal humidity (20 ±5, 60%±5%) 7-3. Operating Climatic Test Accuracy guaranteed range : (-10) ~ (+50), humidity (80)% Operating guaranteed range : (-20) ~ (+50), humidity (50)% 7-4. High Temperature, High Humidity Storage There is no problem in practical use at the validation in the below condition with packaged unit. - Storage (12H) at room temperature after (120H) storage with Temperature : (+60 ), Humidity : (80%) 7-5. Storage Temperature Test There is no problem in practical use at the validation in the below condition with packaged unit. 1) Hot Storage (12H) at room temperature after (48H) storage with Temperature (+85 ) 2) Cold Storage (12H) at room temperature after (48H) storage with Temperature (-30 ) 22 / 26

68 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Temperature Cyclic Test There is no problem in practical use with storage of 2H at room temperature after 30cycles with the below diagram Drop Test When the test should be carried out on the packaged unit, there is no problem in practical use in the below condition. 1) Drop - Drop on the veneer board from (80 cm) height. - Direction : 6 surfaces (each 1 time, total 6 times) 2) Continuous Drop - Drop (50 times) on the veneer board from (50 cm) height Vibration Test When the test should be carried out on the packaged unit, there is no problem in practical use in the below condition. - Sweeping Frequency : (10 ~ 60Hz) - Period : (3 minutes) - Amplitude : (1.0 mm) - Direction : 3 directions (each 1 time, total 3times) 23 / 26

69 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Endurance Testing 1) Zoom motor - More than (500,000 cycle) at room temperature. A 2) Focus motor - More than (500,000 cycle) at room temperature. CW(o n) I M CCW( off) X ,074Ste TELE 106Step 3 Excitation on(hold) 6 : 24 / m

70 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec ) ICF motor - More than (200,000 cycle) at room temperature. 0.1sec 1320pps 800Step 360pps Near 1sec delay 4) IRIS - More than (500,000 cycle) at room temperature. 8Step PI=0 800Step Far 25 / 26

71 Preliminary Specification Version 7.0 Model Name : EEL005D 11. Dec Secular Changing There is no remarkable deterioration with performance in a secular changing of normal use and normal storage Electrostatic Destruction Test Consider a counterplan with an additional deliberation when becoming an issue. 26 / 26

EEM001-HDMI Specification

* EEM001-HDMI EEM001-HDMI Specification - FULL HD Optical 3xZoom and Digital 10xZoom Total 15xZoom SMART FOCUS HDMI vision Camera EEM001-HDMI is an HDMI vision camera. With its compact design. Key Features