BLUEPRINT TM 3D Planning Software - v1.4 scan protocol

Transcription

1 S H O U L D E R Solutions by Tornier 3 D P L A N N I N G S O F T W A R E B L U E P R I N T T M 3 D P L A N N I N G S O F T W A R E S C A N P R O T O C O L BLUEPRINT TM 3D Planning Software - v1.4 scan protocol

2 B L U E P R I N T T M 3 D P L A N N I N G S O F T W A R E S C A N P R O T O C O L BLUEPRINT TM 3D Planning Software - v1.4 SCAN PROTOCOL CE (EC) Marking This product was CE approved in CE Standards This product complies with the following regulatory requirements: EN Copyright 2015 Imascap. All rights reserved. Reproduction or transmission of this document, in whole or in part, in any format or by any means whatsoever is prohibited without IMASCAP s prior written consent. Modific tion We have done everything we can to ensure that the information contained in this document is accurate. However, this information may be modified without prior notice.

3 table of contents BLUEPRINT TM 3D PLANNING SOFTWARE-v SCAN PROTOCOL INTRODUCTION p. 4 PATIENT PREPARATION p. 4 SCANNING INSTRUCTIONS p. 4 IMAGES INSTRUCTIONS p. 4 SCANNING PARAMETERS p. 5 3

4 scan protocol INTRODUCTION This document describes the guidelines for a Shoulder CT-Scan to be processed by BLUEPRINT TM 3D Planning Software. Following this scanning protocol will result in increased accuracy for the measurements. NOTE: Please contact TORNIER if you require further information. PATIENT PREPARATION Place the patient supine on the scanner table, Humerus along the trunk It is strongly recommended to place a sponge or a small pillow between Humerus and trunk Move the patient in the gantry, head first SCANNING INSTRUCTIONS No gantry tilt Limit the field of view to the desired shoulder side It is strongly recommended to perform a full scan of Scapula bone All slices must have the same field of view, and the same slice spacing IMAGES INSTRUCTIONS If possible, use a high-resolution algorithm usually described as Bone Use only axial images, no other reconstructions or reformations in different planes (sagittal or coronal) * The DICOM file format is defined in the Transfer Syntax (0002, 0010) Tag field, the supported formats are the following: UNCOMPRESSED TRANSFER SYNTAX UID DESCRIPTION Implicit VR Little Endian Explicit VR Little Endian Explicit VR Big Endian LOSSLESS COMPRESSED TRANSFER SYNTAX UID DESCRIPTION RLE Lossless JPEG Lossless, Non-Hierarchical (Process 14) PEG Lossless, Hierarchical, First-Order Prediction JPEG 2000 Image Compression (Lossless Only) LOSSY COMPRESSED TRANSFER SYNTAX UID DESCRIPTION JPEG 2000 Image Compression 4

5 scan protocol SCANNING PARAMETERS Recommended parameters PARAMETER DICOM TAG RECOMMENDED Modality (0008,0060) CT Kernel / Algorithm (0018,1210) Bone Slice Thickness (0018, 0050) < 1.0 mm Number of Slices Na > 200 FOV along Scapula Na > 100 mm Slice Increment (0018, 0088) mm X,Y resolution (0028,0030) < 0.5 mm FOV Na mm Matrix size X (0028,0010) et Y (0028,0011) 512 x 512 Kv (0018,0060) 140 Kv mas (0018,1152) 300 mas or more Min and max parameters accepted by BLUEPRINT TM 3D Planning Software. PARAMETER MIN ACCEPTED MAX ACCEPTED Slice Thickness 0.1 mm 1.5 mm Number of slices FOV along scapula 80 mm 450 mm X,Y resolution 0.1 mm 0.65 mm FOV 135 mm 340 mm Matrix size 512 x x 1024 BLUEPRINT TM 3D Planning Software is only cleared for use with the Aequalis TM PerFORM Glenoid System. 5

6 BLUEPRINT TM 3D PLANNING SOFTWARE HELPLINE UNITED STATES SUPPORT Phone number: We are here to help. The helpline is managed 8:00 AM to 5:00 PM CST. 3 D P L A N N I N G S O F T W A R E ENGINEERED WITH IMASCAP TECHNOLOGY US HEADQUARTERS Tornier, Inc Nesbitt Avenue South Bloomington, MN USA MANUFACTURER INTERNATIONAL HEADQUARTERS Tornier SAS 161 rue Lavoisier Montbonnot Saint Martin France + 33 (0) Prior to using any Tornier device, please review the instructions for use and surgical technique for a complete listing of indications, contraindications, warnings, precautions, potential adverse events, and directions for use. BLUEPRINT TM 3D Planning Software - v1.4 - Scan Protocol - CAW rev A - ECN