v Cartesian Grid Generation SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
|
|
|
- Lewis Walton
- 5 years ago
- Views:
Transcription
1 v SMS 12.3 Tutorial Objectives This tutorial gives a brief introduction to generating a Cartesian Grid in SMS. Prerequisites Overview Tutorial Map Module Tutorial Requirements Map Module Cartesian Grid Module Scatter Module Time 5 10 minutes Page 1 of 7 Aquaveo 2018
2 1 Introduction Getting Started Creating the Cartesian Grid Creating the Cartesian Grid Frame Mapping to the Grid Interpolating to a 2D Grid Grid Display Options Conclusion Introduction This tutorial demonstrates how to create a Cartesian grid in SMS. Some of the models that use Cartesian grids include STWAVE, CMS-Wave, and TUFLOW. This tutorial uses data from Shinnecock Inlet, Long Island, New York, in the United States. 2 Getting Started The initial project has a scatter dataset of the area around Shinnecock Inlet on the south shore of Long Island, New York. The display and object projections have already been set. To open the project, do the following: 1. Select File Open... to bring up the Open dialog. 2. Browse to the data files folder for this tutorial and select shinnecock.sms. 3. Click Open to import the project and exit the Open dialog. The project should appear similar to Figure 1. Figure 1 Initial project appearance Page 2 of 7 Aquaveo 2018
3 3 Creating the Cartesian Grid The next step is to create a Cartesian. The grid frame is created in the Map module, which contains tools for creating GIS objects such as points, arcs, and polygons. It is also used for creating a frame, which will be filled in by a Cartesian grid. 3.1 Creating the Cartesian Grid Frame To create the grid frame: 1. Switch to the Map module. 2. Right-click Area Properties in the Project Explorer, select Type Generic CGrid Generator. 3. Right-click Area Property and select Rename. 4. Enter Shinnecock and press Enter to set the new name. 5. Using the Create 2-D Grid Frame tool, click out three corners of the grid in the order shown in Figure 2 to create the grid frame. The first two points clicked define the i-direction, which is the direction of the incoming waves, and the last two points clicked are placed on the land. Figure 2 Creating the Cartesian grid frame 6. Using the Select Grid Frame tool, click on the selection box in the middle of the grid frame. The origin should be in the bottom right corner of the grid, as indicated by the arrows (Figure 3). Page 3 of 7 Aquaveo 2018
4 Figure 3 The origin is at the bottom right corner of the grid 7. Resize the grid frame by dragging the corners or edges until the grid frame fits over the desired area. Dragging a corner or side resizes the frame. Dragging the middle point moves the entire frame. Rotate the frame around the origin by dragging the circle located at the top right corner just outside the grid. 8. Double-click on the grid frame to bring up the Grid Frame Properties dialog. The origin and angle can be manually entered in this dialog. This allows for greater precision in placement of the grid. 9. In the Origin, Orientation and Dimensions section, enter 438,000.0 as the Origin X. 10. Enter 70,000.0 as the Origin Y. 11. Enter as the Angle. 12. Enter 15,000.0 as the I size and 17,000.0 as the J size. These values can also be edited when generating the 2-D grid in section Click OK to close the Grid Frame Properties dialog. 14. Click outside the grid frame to unselect the grid. 15. Frame the project. 3.2 Mapping to the Grid Now to fill the interior of the grid. While the grid is filling, the depth and current values will be interpolated from the scatter set and mapped to each cell. To do this: 1. Right-click on Shinnecock and select Convert Map 2D Grid to bring up the Map 2D Grid dialog. 2. Verify the values in the Origin, Orientation and Dimensions section match those given in steps 9 12 in section In both the I Cell Options and J Cell Options sections, select Cell size and enter in the field to the right of each. Page 4 of 7 Aquaveo 2018
5 4. In the Depth Options section, select Scatter Set from the Source drop-down, then click Select to bring up the Interpolation dialog. 5. In the Scatter Set To Interpolate From section, select elevation from the tree list. 6. Click OK to exit Interpolation dialog. The elevation values will now be interpolated to the final Cartesian grid. Other options can be selected as needed. 7. Click OK to exit the Map 2D Grid dialog and create the Cartesian grid. The project should appear similar to Figure 4. Figure 4 Cartesian grid with the scatter set A Cartesian grid has been created from the grid frame. 4 Interpolating to a 2D Grid It is easiest to interpolate elevations when creating the 2D grid. However, elevation values can be interpolated to the grid after the grid has been generated but using the scatter module interpolation commands. 1. Select the depth under Shinnecock to make it active. 2. Select Scatter Interpolate to Cartesian Grid to bring up the Interpolation dialog. 3. In the Scatter Set To Interpolate From section, select depth from the tree list. 4. Click OK to exit Interpolation dialog. Page 5 of 7 Aquaveo 2018
6 The depth dataset has now been interpolated to the Cartesian grid as depth_ interp. It is not beeing used as the elevation for the grid because another dataset was already being used for the elevation. To change this: 5. Select Shinnecock Grid to make it active. 6. Select Data Map Elevation to bring up a Select Dataset dialog. 7. Select depth_interp and click Select to close the Select Dataset dialog. The depth_interp dataset has now been set as the elevation for the grid. 5 Grid Display Options To view only the grid: 1. Turn off Scatter Data in the Project Explorer. 2. Frame the project. 3. Select Display Display Options to bring up the Display Options dialog. 4. Select Cartesian Grid from the list on the left. 5. On the Cartesian Grid tab, click All Off and turn on Contours. 6. On the Contours tab, in the Contour method section, select Color Fill from the first drop-down. 7. Click OK to close the Display Options dialog. 8. Select the depth dataset under Shinnecok Grid. The project should appear similar to Figure 5. Figure 5 Cartesian grid with contours Page 6 of 7 Aquaveo 2018
7 6 Conclusion This concludes the tutorial. The tutorial creating a Cartesian grid using the Cartesian grid generator coverage. It also showed ways to interpret elevation to a Cartesian grid. Page 7 of 7 Aquaveo 2018
v CMS-Wave Analysis SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This workshop gives a brief introduction to the CMS-Wave interface and model. This model is similar to STWAVE and the tutorial for the models is similar. As with the
v STWAVE Analysis SMS 11.2 Tutorial Requirements Map Module STWAVE Cartesian Grid Module Scatter Module Prerequisites Time minutes
v. 11.2 SMS 11.2 Tutorial Objectives This workshop gives a brief introduction to the STWAVE modules. Data from the Shinnecock Inlet, Long Island, New York, have been set up as an example. This example
Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Requirements
v. 13.0 SMS 13.0 Tutorial Objectives Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Prerequisites Overview Tutorial Requirements Map Module
v CMS-Flow SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This lesson demonstrates how to prepare a grid and run a solution using. Prerequisites SMS Overview Requirements Map Module Cartesian Grid Module Scatter Module Time
v Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
v SMS Tutorials Working with Rasters Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots, and interpolate
v Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
Objectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid independent conceptual models.
v. 9.0 GMS 9.0 Tutorial Use points, arcs and polygons to make grid independent conceptual models Objectives This tutorial demonstrates how to use feature objects points, arcs and polygons to make grid
v Working with Rasters SMS 12.1 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and. Use TINs with horizons to create 3D, finite element meshes
v. 10.4 GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and Meshes Use TINs with horizons to create 3D, finite element meshes Objectives Learn how to use TINs to assign horizon surfaces and how
v TUFLOW-2D Hydrodynamics SMS Tutorials Time minutes Prerequisites Overview Tutorial
v. 12.2 SMS 12.2 Tutorial TUFLOW-2D Hydrodynamics Objectives This tutorial describes the generation of a TUFLOW project using the SMS interface. This project utilizes only the two dimensional flow calculation
v SMS 12.2 Tutorial ADCIRC Analysis Requirements Time minutes Prerequisites Overview Tutorial
v. 12.2 SMS 12.2 Tutorial Analysis Objectives This tutorial reviews how to prepare a mesh for analysis and run a solution for. It will cover preparation of the necessary input files for the circulation
v SMS 11.2 Tutorial ADCIRC Analysis Prerequisites Overview Tutorial Time minutes
v. 11.2 SMS 11.2 Tutorial ADCIRC Analysis Objectives This lesson reviews how to prepare a mesh for analysis and run a solution for ADCIRC. It will cover preparation of the necessary input files for the
Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.
v. 10.0 GMS 10.0 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS
v Observations SMS Tutorials Prerequisites Requirements Time Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with measured field
v TUFLOW FV SMS 12.2 Tutorial Time Requirements Prerequisites Objectives
SMS 12.2 Tutorial v. 12.2 Objectives is an engine for performing 2D and 3D hydrodynamic simulations. The model solves the Non-linear Shallow Water Equations (NLSWE) on a flexible mesh using a finite-volume
GMS Tutorials MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach
GMS Tutorials MODFLOW Conceptual Model Approach I GMS 10.4 Tutorial MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach v. 10.4 Objectives
MODFLOW Regional to Local Model Conversion,
v. 10.2 GMS 10.2 Tutorial MODFLOW Regional to Local Model Conversion, Steady State Create a local model from a regional model using convenient tools provided in GMS Objectives Use the convenient tools
v SMS 13.0 Tutorial Scatter Data Define Scatter Extents Requirements Scatter Module Map Module Time minutes
v. 13.0 SMS 13.0 Tutorial Scatter Data Objectives This tutorial demonstrates how to define the area of impact or extent of a scattered data set or TIN (triangulated irregular networks) in the scatter module
v TUFLOW FV SMS 13.0 Tutorial Requirements Time Prerequisites Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates creating a simple model of a short section of river using the SMS TUFLOW FV interface. A mesh for an inbank area of a river will be built,
v SMS 12.2 Tutorial Observation Prerequisites Requirements Time minutes
v. 12.2 SMS 12.2 Tutorial Observation Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with
SMS v Simulations. SRH-2D Tutorial. Time. Requirements. Prerequisites. Objectives
SMS v. 12.1 SRH-2D Tutorial Objectives This tutorial will demonstrate the process of creating a new SRH-2D simulation from an existing simulation. This workflow is very useful when adding new features
v MODFLOW Automated Parameter Estimation Model calibration with PEST GMS Tutorials Time minutes
v. 10.1 GMS 10.1 Tutorial Model calibration with PEST Objectives Learn how to calibrate a MODFLOW model using PEST. Prerequisite Tutorials MODFLOW Model Calibration Required Components Grid Module Map
This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file.
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file. Prerequisites None Requirements Scatter Module Map
v Google Earth Files SMS 13.0 Tutorial Prerequisites None Requirements Mesh Module Google Earth Time minutes
v. 13.0 SMS 13.0 Tutorial Objectives Learn how to save SMS data to a KMZ file format. KMZ files are Google Earth files and will allow viewing SMS data in Google Earth. SMS can save any georeferenced data
v Creating a Size Function SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Creating a Size Function Objectives This lesson will instruct how to create and apply a size function to a 2d mesh model. Size functions can be created using various data. This
v SRH-2D Post-Processing SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial SRH-2D Post-Processing Objectives This tutorial illustrates some techniques for manipulating the solution generated by the Sedimentation and River Hydraulics Two-Dimensional (SRH-2D)
v Introduction to WMS WMS 11.0 Tutorial Become familiar with the WMS interface Prerequisite Tutorials None Required Components Data Map
s v. 11.0 WMS 11.0 Tutorial Become familiar with the WMS interface Objectives Import files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
v SMS 11.1 Tutorial BOUSS2D Prerequisites Overview Tutorial Time minutes
v. 11.1 SMS 11.1 Tutorial BOUSS2D Objectives This lesson will teach you how to use the interface for BOUSS-2D and run the model for a sample application. As a phase-resolving nonlinear wave model, BOUSS-2D
v Map Module Operations SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial describes the fundamental tools in the Map module of the SMS. This tutorial provides information that is useful when constructing any type of geometric
GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation Objectives Learn how to constrain the areal extent of the solids created
SMS v D Summary Table. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorial Objectives Learn the process of making a summary table to compare the 2D hydraulic model results with 1D hydraulic model results. This tutorial introduces a method of presenting
v SMS 13.0 Tutorial GIS P Prerequisites Time Requirements Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct
v Data Visualization SMS 12.3 Tutorial Prerequisites Requirements Time Objectives Learn how to import, manipulate, and view solution data.
v. 12.3 SMS 12.3 Tutorial Objectives Learn how to import, manipulate, and view solution data. Prerequisites None Requirements GIS Module Map Module Time 30 60 minutes Page 1 of 16 Aquaveo 2017 1 Introduction...
v SMS 11.1 Tutorial SRH-2D Prerequisites None Time minutes Requirements Map Module Mesh Module Scatter Module Generic Model SRH-2D
v. 11.1 SMS 11.1 Tutorial SRH-2D Objectives This lesson will teach you how to prepare an unstructured mesh, run the SRH-2D numerical engine and view the results all within SMS. You will start by reading
MODFLOW PEST Pilot Points Use pilot points with PEST to automatically calibrate a MODFLOW model
v. 10.2 GMS 10.2 Tutorial Use pilot points with PEST to automatically calibrate a MODFLOW model Objectives Learn the features and options related to pilot points when used with PEST. Use fixed value pilot
This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional (SRH-2D) simulation. Requirements
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation. Prerequisites SMS Overview tutorial Requirements Model Map Module
v Getting Started An introduction to GMS GMS Tutorials Time minutes Prerequisite Tutorials None
v. 10.3 GMS 10.3 Tutorial An introduction to GMS Objectives This tutorial introduces GMS and covers the basic elements of the user interface. It is the first tutorial that new users should complete. Prerequisite
Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
v. 10.3 GMS 10.3 Tutorial The MODFLOW drain return package Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional (SRH-2D) simulation.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation. Prerequisites SMS Overview tutorial Requirements Model Map Module
MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 10.1 GMS 10.1 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual
v SMS 12.3 Tutorial Import From Web Requirements Internet connection Time minutes Prerequisites None Objectives
SMS 12.3 Tutorial Import from Web v. 12.3 Objectives This tutorial gives an overview of the Importing from Web option offered by SMS. This option connects SMS to a web based program that adds additional
WMS 9.1 Tutorial GSSHA Modeling Basics Stream Flow Integrate stream flow with your GSSHA overland flow model
v. 9.1 WMS 9.1 Tutorial Integrate stream flow with your GSSHA overland flow model Objectives Learn how to add hydraulic channel routing to your GSSHA model and how to define channel properties. Learn how
Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface. Prerequisites Overview Tutorial Requirements ADH Mesh Module Scatter
v SMS 12.3 Tutorial GIS P Prerequisites Time Requirements Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct
MODFLOW Interpolating Layer Data Interpolating MODFLOW elevations and other data from discrete points
v. 10.3 GMS 10.3 Tutorial Interpolating MODFLOW elevations and other data from discrete points Objectives Learn how to effectively use GMS tools to interpolate MODFLOW layer elevation data and other MODFLOW
SMS v SRH-2D Tutorials Obstructions. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorials Obstructions Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should
v Mesh Generation SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Mesh Generation Objectives This tutorial demostrates the fundamental tools used to generate a mesh in the SMS. Prerequisites SMS Overview SMS Map Module Requirements Mesh Module
v UGrid Clipping GMS 10.3 Tutorial Using Clipping display option to visualize UGrid data Prerequisite Tutorials Getting Started
v. 10.3 GMS 10.3 Tutorial Using Clipping display option to visualize UGrid data Objectives This tutorial describes the UGrid clipping tool. The UGrid clipping tool can be used to cut away a portion of
v TUFLOW 1D/2D SMS 11.2 Tutorial Time minutes Prerequisites TUFLOW 2D Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial describes the generation of a 1D TUFLOW project using the SMS interface. It is strongly recommended that the TUFLOW 2D tutorial be completed before doing
v SMS Tutorials SRH-2D Prerequisites Requirements SRH-2D Model Map Module Mesh Module Data files Time
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation using SMS version 11.2 or later. Prerequisites SMS Overview tutorial
Stratigraphy Modeling Horizons and Solids
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Horizons and Solids Create solids from boreholes using the Horizons Solids tool. Objectives Learn how to construct a set of solid models using the horizon
v GMS 10.0 Tutorial UTEXAS Dam with Seepage Use SEEP2D and UTEXAS to model seepage and slope stability of an earth dam
v. 10.0 GMS 10.0 Tutorial Use SEEP2D and UTEXAS to model seepage and slope stability of an earth dam Objectives Learn how to build an integrated SEEP2D/UTEXAS model in GMS. Prerequisite Tutorials SEEP2D
v mod-path3du A particle tracking program for MODFLOW-USG GMS Tutorials Time minutes Prerequisite Tutorials MODPATH
v. 10.4 GMS 10.4 Tutorial A particle tracking program for MODFLOW-USG Objectives Become familiar with GMS's interface for. Prerequisite Tutorials MODPATH Required Components MODFLOW-USG MP3DU Time 15 30
SMS v Weir Flow. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.2 SRH-2D Tutorial Objectives This tutorial demonstrates the process of using a weir boundary condition (BC) within SRH-2D to model an overflow weir near a bridge structure. The Simulations tutorial
SMS v Obstructions. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should have been completed
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.2 SMS 12.2 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
MODFLOW Conceptual Model Approach 1 Build a basic MODFLOW model using the conceptual model approach
GMS Tutorials v. 10.4 MODFLOW Conceptual Model Approach I GMS 10.4 Tutorial MODFLOW Conceptual Model Approach 1 Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.3 SMS 12.3 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v MODPATH GMS 10.3 Tutorial The MODPATH Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.3 GMS 10.3 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, displaying pathlines in different
MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 10.2 GMS 10.2 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
v SMS Tutorials ADCIRC LTEA Time minutes Prerequisites ADCIRC Tutorial Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives LTEA stands for the Local Truncation Error Analysis. The name refers to an analysis methodology for measuring local truncation error in a numerical analysis. The LTEA
Stratigraphy Modeling Horizons with Rasters Create solids from rasters using the Horizons Solids tool.
v. 10.1 GMS 10.1 Tutorial Create solids from rasters using the Horizons Solids tool. Objectives Learn what a raster catalog is and how it can be used to create subsurface models. Prerequisite Tutorials
SMS v Culvert Structures with HY-8. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Culvert Structures with HY-8 Objectives This tutorial demonstrates the process of modeling culverts in SRH-2D coupled with the Federal Highway Administrations HY-8 culvert analysis
SRH-2D Additional Boundary Conditions
v. 12.2 SMS 12.2 Tutorial SRH-2D Additional Boundary Conditions Objectives Learn techniques for using various additional boundary conditions with the Sedimentation and River Hydraulics Two-Dimensional
v Introduction to WMS Become familiar with the WMS interface WMS Tutorials Time minutes Prerequisite Tutorials None
s v. 10.0 WMS 10.0 Tutorial Become familiar with the WMS interface Objectives Read files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
GMS 9.0 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 9.0 GMS 9.0 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
Using rasters for interpolation and visualization in GMS
v. 10.3 GMS 10.3 Tutorial Using rasters for interpolation and visualization in GMS Objectives This tutorial teaches how GMS uses rasters to support all kinds of digital elevation models and how rasters
GMS 9.1 Tutorial MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 9.1 GMS 9.1 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual model
MODFLOW LGR Create MODFLOW-LGR models with locally refined grids using GMS
v. 10.1 GMS 10.1 Tutorial MODFLOW LGR Create MODFLOW-LGR models with locally refined grids using GMS Objectives GMS supports building MODFLOW-LGR models with nested child grids. This tutorial shows the
SMS v Culvert Structures. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.0 SRH-2D Tutorial Objectives This tutorial demonstrates the process of modeling culverts in SRH-2D. The Working with Simulations tutorial should have been completed before attempting this one.
v Annotation Tools GMS 10.4 Tutorial Use scale bars, North arrows, floating images, text boxes, lines, arrows, circles/ovals, and rectangles.
v. 10.4 GMS 10.4 Tutorial Use scale bars, North arrows, floating images, text boxes, lines, arrows, circles/ovals, and rectangles. Objectives GMS includes a number of annotation tools that can be used
v Scatter Data TINs SMS 12.3 Tutorial Requirements Scatter Module Map Module Time minutes Prerequisites None Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial covers the basics of working with TINs (triangulated irregular networks) using the scatter module of SMS, including: importing TIN data, editing and filtering
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 10.1 WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
Learn how to delineate a watershed using the hydrologic modeling wizard
v. 11.0 WMS 11.0 Tutorial Learn how to delineate a watershed using the hydrologic modeling wizard Objectives Import a digital elevation model, compute flow directions, and delineate a watershed and sub-basins
Observation Coverage SURFACE WATER MODELING SYSTEM. 1 Introduction. 2 Opening the Data
SURFACE WATER MODELING SYSTEM Observation Coverage 1 Introduction An important part of any computer model is the verification of results. Surface water modeling is no exception. Before using a surface
GMS 10.0 Tutorial MODFLOW Conceptual Model Approach I Build a basic MODFLOW model using the conceptual model approach
v. 10.0 GMS 10.0 Tutorial Build a basic MODFLOW model using the conceptual model approach Objectives The conceptual model approach involves using the GIS tools in the Map module to develop a conceptual
v MODFLOW ETS Package GMS 10.3 Tutorial The MODFLOW Evapotranspiration Segments (ETS) package interface in GMS
v. 10.3 GMS 10.3 Tutorial The MODFLOW Evapotranspiration Segments (ETS) package interface in GMS Objectives Learn how to use the MODFLOW Evapotranspiration Segments (ETS) package interface in GMS and compare
MODFLOW STR Package The MODFLOW Stream (STR) Package Interface in GMS
v. 10.1 GMS 10.1 Tutorial The MODFLOW Stream (STR) Package Interface in GMS Objectives Learn how to create a model containing STR-type streams. Create a conceptual model of the streams using arcs and orient
v SMS 12.2 Tutorial Online Data Dynamic Images Prerequisites None Requirements Internet Connection Time minutes
v. 12.2 SMS 12.2 Tutorial Dynamic Images Objectives This lesson is designed to help users become familiar with the Dynamic Image option offered by SMS. This option connects SMS to a web based program that
v MODFLOW Advanced PEST Pilot Points, SVD-Assist, Parallel PEST GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial Pilot Points, SVD-Assist, Parallel PEST Objectives Learn how to parameterize a MODFLOW model and run PEST to obtain optimal parameter values. Experiment with truncated singular
GMS 9.1 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 9.1 GMS 9.1 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map module to develop
GMS 8.0 Tutorial MODFLOW Interpolating Layer Data Interpolating MODFLOW elevations and other data from discrete points
v. 8.0 GMS 8.0 Tutorial Interpolating MODFLOW elevations and other data from discrete points Objectives Learn how to effectively use GMS tools to interpolate MODFLOW layer elevation data and other MODFLOW
v. 8.2 GMS 8.2 Tutorial MODFLOW ETS Package The MODFLOW Evapotranspiration Segments (ETS) package interface in GMS Prerequisite Tutorials None
v. 8.2 GMS 8.2 Tutorial The MODFLOW Evapotranspiration Segments (ETS) package interface in GMS Objectives Learn how to use the MODFLOW Evapotranspiration Segments (ETS) package interface in GMS and compare
Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.2 GMS 10.2 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
Import, view, edit, convert, and digitize triangulated irregular networks
v. 10.1 WMS 10.1 Tutorial Import, view, edit, convert, and digitize triangulated irregular networks Objectives Import survey data in an XYZ format. Digitize elevation points using contour imagery. Edit
v SEEP2D Sheet Pile Use SEEP2D to create a flow net around a sheet pile GMS Tutorials Time minutes Prerequisite Tutorials Feature Objects
v. 10.1 GMS 10.1 Tutorial Use SEEP2D to create a flow net around a sheet pile Objectives Learn how to set up and solve a seepage problem involving flow around a sheet pile using the SEEP2D interface in
v. 9.0 GMS 9.0 Tutorial UTEXAS Dam with Seepage Use SEEP2D and UTEXAS to model seepage and slope stability of a earth dam Prerequisite Tutorials None
v. 9.0 GMS 9.0 Tutorial Use SEEP2D and UTEXAS to model seepage and slope stability of a earth dam Objectives Learn how to build an integrated SEEP2D/UTEXAS model in GMS. Prerequisite Tutorials None Required
GMS 10.0 Tutorial MODFLOW Conceptual Model Approach II Build a multi-layer MODFLOW model using advanced conceptual model techniques
v. 10.0 GMS 10.0 Tutorial Build a multi-layer MODFLOW model using advanced conceptual model techniques 00 Objectives The conceptual model approach involves using the GIS tools in the Map Module to develop
Learn how to delineate a watershed using the hydrologic modeling wizard
v. 10.1 WMS 10.1 Tutorial Learn how to delineate a watershed using the hydrologic modeling wizard Objectives Import a digital elevation model, compute flow directions, and delineate a watershed and sub-basins
v SMS 11.1 Tutorial GIS Requirements GIS Module Map Module ArcGis (Optional) Time minutes Prerequisites None Objectives
v. 11.1 SMS 11.1 Tutorial GIS Objectives This tutorial demonstrates how you can read in GIS data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. We will
WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Floodplain Delineation Learn how to us the WMS floodplain delineation tools
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Floodplain Delineation Learn how to us the WMS floodplain delineation tools Objectives Experiment with the various floodplain delineation options
v SMS 12.2 Tutorial GIS Requirements GIS Module Map Module ArcGis (Optional) Time minutes Prerequisites None Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This tutorial demonstrates how to read in data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will
WMS 10.1 Tutorial GSSHA Applications Analyzing the Effects of Land Use Change (Part - I) Model land use changes using GSSHA
v. 10.1 WMS 10.1 Tutorial GSSHA Applications Analyzing the Effects of Land Use Change (Part - I) Model land use changes using GSSHA Objectives This tutorial demonstrates how to model and compare the effects
WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 8.4 WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
WMS 9.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM
v. 9.1 WMS 9.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM Objectives Learn how to delineate a watershed
MODFLOW Generating Data from Solids Using solid models to represent complex stratigraphy with MODFLOW
v. 10.3 GMS 10.3 Tutorial MODFLOW Generating Data from Solids Using solid models to represent complex stratigraphy with MODFLOW Objectives Learn the steps necessary to convert solid models to MODFLOW data
MODFLOW Advanced Parameter Options. GMS support for native MODFLOW parameters, instances, and clusters
v. 10.2 GMS 10.2 Tutorial GMS support for native MODFLOW parameters, instances, and clusters Objectives Learn how to use some of the advanced features associated with MODFLOW parameters including instances
v SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
WMS 10.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM
v. 10.1 WMS 10.1 Tutorial GSSHA WMS Basics Watershed Delineation using DEMs and 2D Grid Generation Delineate a watershed and create a GSSHA model from a DEM Objectives Learn how to delineate a watershed