This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file.
|
|
|
- Evan Rodger McCarthy
- 5 years ago
- Views:
Transcription
1 v SMS 13.0 Tutorial Objectives This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file. Prerequisites None Requirements Scatter Module Map Module Time minutes Page 1 of 5 Aquaveo 2018
2 1 Introduction Importing Topographic Data Exporting to Tabular Data Conclusion Introduction A common method of obtaining data points for two-dimensional hydrodynamic modeling is from scattered survey points or cross sections. SMS can import delimited text files which can then be triangulated. The data used in this most of this tutorial is from where I-35 crosses the Cimarron River in Oklahoma in the United States. 2 Importing Topographic Data Start by importing data from a tab-delimited text file by doing the following: 1. Select File Open to bring up the Open dialog. 2. Browse to the data files folder for this tutorial. 3. Select cimarron_survey_tab.txt and click Open to exit the Open dialog and bring up the Step 1 of 2 page of the File Import Wizard dialog. This dialog provides options to specify delimiters and a starting point for importing delimited data. 4. In the File import options section, turn on Space under Set the column delimiters. 5. Below the File import options section, enter 2 as the Start import at row and turn off Heading row. 6. Click Next to accept the other defaults and go to the Step 2 of 2 page of the File Import Wizard dialog. 7. Select Scatter Set from the SMS data type drop-down. This tells SMS to import the delimited data as scatter points. 8. In the Mapping section, make sure Triangulate data is turned on. This tells SMS to triangulate the points into a TIN. 9. Click Finish to close the File Import Wizard dialog and import the data. 10. Select Display Display Options to bring up the Display Options dialog. 11. Select Scatter from the list on the left. 12. On the Scatter tab, turn on Points. Page 2 of 5 Aquaveo 2018
3 13. Click OK to close the Display Options dialog. 14. Frame the project. The project should appear similar to Figure 1. Figure 1 Imported delimited data displayed as a scatter set Now adjust the display settings to see the TIN triangles and the surface contour data. 15. Click Display Options to bring up the Display Options dialog. 16. Select Scatter from the list on the left. 17. On the Scatter tab, turn on Triangles and Contours. 18. On the Contours tab, in the Contour Method section, select Color Fill from the first drop-down. 19. Click OK to exit the Display Options dialog. The project should appear similar to Figure 2. Figure 2 Triangulated and contoured data points Page 3 of 5 Aquaveo 2018
4 3 Exporting to Tabular Data Data in SMS can be exported into a tabular format from SMS for use in other software. Start with importing a project containing a mesh. 1. Select File New to clear out the data in SMS. 2. When asked to confirm deletion of all data, click Don t Save. 3. Click Open to bring up the Open dialog. 4. Browse to the data files folder for this tutorial. 5. Select Cimarron.sms and click Open to exit the Open dialog. The project should appear similar to Figure 3. Figure 3 Imported mesh To export the mesh as a tab-delineated text file, do the following: 6. In the Project Explorer, select Cimarron01 to make it active. 7. Select File Save As to bring up the Save As dialog. 8. Select Tabular Data Files (*.txt) from the Save as type drop-down. 9. Enter cimarron_tabular2.txt as the File Name. 10. Click Save to close the Save As dialog and open the Export Tabular File dialog. The Export Tabular File dialog allows defining how the mesh data will be saved in the text file. 11. In the Options section, enter 4 as the Number of Columns. Page 4 of 5 Aquaveo 2018
5 12. In the spreadsheet, in column 1, click Data in the Data row to open the Format Column 13. In the Data Type section, select x location and click OK to close the Format Column 14. In column 2, on the Data row, click Data button to open the Format Column 15. In the Dataset to Export section, select y location from the tree list and click OK to close the Format Column 16. In column 3, on the Data row, click Data button to open the Format Column 17. In the Dataset to Export section, select Z from the tree list and click OK to close the Format Column 18. In column 4, on the Data row, click Data button to open the Format Column 19. In the Dataset to Export section, select Velocity from the tree list. Because the Velocity dataset is transient, it must be specified which time steps will be included in the text file. 20. In the Time steps to Export section, change Export to time step range. 21. Change the Last drop-down menu to be 04:00:00. This will include all time steps. 22. Click OK to close the Format Column 23. Turn on Column Headings. 24. Enter X on the Heading row in column Repeat step 12 for columns 2, 3, and 4, entering Y, Z, and Velocity respectively. 26. Click OK to exit the Export Tabular File dialog and save the file. 4 Conclusion This concludes the tutorial. It reviewed some of the features that SMS provides for importing and exporting scatter data. Feel free to continue experimenting with the interface, or exit the program. Page 5 of 5 Aquaveo 2018
v Scatter Data TINs SMS 12.3 Tutorial Requirements Scatter Module Map Module Time minutes Prerequisites None Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial covers the basics of working with TINs (triangulated irregular networks) using the scatter module of SMS, including: importing TIN data, editing and filtering
Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial will introduce how to prepare and run a basic ADH model using the SMS interface. Prerequisites Overview Tutorial Requirements ADH Mesh Module Scatter
v SRH-2D Post-Processing SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial SRH-2D Post-Processing Objectives This tutorial illustrates some techniques for manipulating the solution generated by the Sedimentation and River Hydraulics Two-Dimensional (SRH-2D)
v Google Earth Files SMS 13.0 Tutorial Prerequisites None Requirements Mesh Module Google Earth Time minutes
v. 13.0 SMS 13.0 Tutorial Objectives Learn how to save SMS data to a KMZ file format. KMZ files are Google Earth files and will allow viewing SMS data in Google Earth. SMS can save any georeferenced data
v SMS 13.0 Tutorial Scatter Data Define Scatter Extents Requirements Scatter Module Map Module Time minutes
v. 13.0 SMS 13.0 Tutorial Scatter Data Objectives This tutorial demonstrates how to define the area of impact or extent of a scattered data set or TIN (triangulated irregular networks) in the scatter module
SRH-2D Additional Boundary Conditions
v. 12.2 SMS 12.2 Tutorial SRH-2D Additional Boundary Conditions Objectives Learn techniques for using various additional boundary conditions with the Sedimentation and River Hydraulics Two-Dimensional
v TUFLOW FV SMS 13.0 Tutorial Requirements Time Prerequisites Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates creating a simple model of a short section of river using the SMS TUFLOW FV interface. A mesh for an inbank area of a river will be built,
v TUFLOW-2D Hydrodynamics SMS Tutorials Time minutes Prerequisites Overview Tutorial
v. 12.2 SMS 12.2 Tutorial TUFLOW-2D Hydrodynamics Objectives This tutorial describes the generation of a TUFLOW project using the SMS interface. This project utilizes only the two dimensional flow calculation
SMS v D Summary Table. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorial Objectives Learn the process of making a summary table to compare the 2D hydraulic model results with 1D hydraulic model results. This tutorial introduces a method of presenting
Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Requirements
v. 13.0 SMS 13.0 Tutorial Objectives Learn to create a cell-centered grid using data from the area around Kalaeloa Barbers Point Harbor in Hawaii. Prerequisites Overview Tutorial Requirements Map Module
Import, view, edit, convert, and digitize triangulated irregular networks
v. 10.1 WMS 10.1 Tutorial Import, view, edit, convert, and digitize triangulated irregular networks Objectives Import survey data in an XYZ format. Digitize elevation points using contour imagery. Edit
v Observations SMS Tutorials Prerequisites Requirements Time Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with measured field
GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and. Use TINs with horizons to create 3D, finite element meshes
v. 10.4 GMS 10.4 Tutorial Stratigraphy Modeling Horizons, TINs, and Meshes Use TINs with horizons to create 3D, finite element meshes Objectives Learn how to use TINs to assign horizon surfaces and how
This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional (SRH-2D) simulation. Requirements
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation. Prerequisites SMS Overview tutorial Requirements Model Map Module
v SMS Tutorials Working with Rasters Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots, and interpolate
This tutorial introduces the HEC-RAS model and how it can be used to generate files for use with the HEC-RAS software.
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial introduces the model and how it can be used to generate files for use with the software. Prerequisites Overview Tutorial Requirements 5.0 Mesh Module
v Cartesian Grid Generation SMS 12.3 Tutorial Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial gives a brief introduction to generating a Cartesian Grid in SMS. Prerequisites Overview Tutorial Map Module Tutorial Requirements Map Module Cartesian
v CMS-Flow SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This lesson demonstrates how to prepare a grid and run a solution using. Prerequisites SMS Overview Requirements Map Module Cartesian Grid Module Scatter Module Time
v Stratigraphy Modeling TIN Surfaces GMS 10.3 Tutorial Introduction to the TIN (Triangulated Irregular Network) surface object
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling TIN Surfaces Introduction to the TIN (Triangulated Irregular Network) surface object Objectives Learn to create, read, alter, and manage TIN data from within
v SMS 12.2 Tutorial Observation Prerequisites Requirements Time minutes
v. 12.2 SMS 12.2 Tutorial Observation Objectives This tutorial will give an overview of using the observation coverage in SMS. Observation points will be created to measure the numerical analysis with
Geostatistics 2D GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents
GMS 7.0 TUTORIALS 1 Introduction Two-dimensional geostatistics (interpolation) can be performed in GMS using the 2D Scatter Point module. The module is used to interpolate from sets of 2D scatter points
v SMS Tutorials SRH-2D Prerequisites Requirements SRH-2D Model Map Module Mesh Module Data files Time
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation using SMS version 11.2 or later. Prerequisites SMS Overview tutorial
Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional (SRH-2D) simulation.
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial shows how to build a Sedimentation and River Hydraulics Two-Dimensional () simulation. Prerequisites SMS Overview tutorial Requirements Model Map Module
v SMS 11.1 Tutorial Scatter Data - TINs Requirements Scatter Module Map Module Time minutes Prerequisites None Objectives
v. 11.1 SMS 11.1 Tutorial Scatter Data - TINs Objectives This workshop covers the basics of working with TINs (triangulated irregular networks) using the scatter module of SMS. We will cover importing
v TUFLOW FV SMS 12.2 Tutorial Time Requirements Prerequisites Objectives
SMS 12.2 Tutorial v. 12.2 Objectives is an engine for performing 2D and 3D hydrodynamic simulations. The model solves the Non-linear Shallow Water Equations (NLSWE) on a flexible mesh using a finite-volume
v Basic FESWMS Analysis SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This tutorial instructs on how to prepare a mesh for a FESWMS simulation. Prerequisites Overview Tutorial Requirements FESWMS Fst2dh Mesh Module Time 15 30 minutes
v Introduction to WMS WMS 11.0 Tutorial Become familiar with the WMS interface Prerequisite Tutorials None Required Components Data Map
s v. 11.0 WMS 11.0 Tutorial Become familiar with the WMS interface Objectives Import files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
WMS 9.0 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS
v. 9.0 WMS 9.0 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS Objectives Learn how to build cross sections, stream centerlines, and bank
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS
v. 10.1 WMS 10.1 Tutorial Hydraulics and Floodplain Modeling HEC-RAS Analysis Learn how to setup a basic HEC-RAS analysis using WMS Objectives Learn how to build cross sections, stream centerlines, and
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.2 SMS 12.2 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.3 SMS 12.3 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
MODFLOW Advanced Parameter Options. GMS support for native MODFLOW parameters, instances, and clusters
v. 10.2 GMS 10.2 Tutorial GMS support for native MODFLOW parameters, instances, and clusters Objectives Learn how to use some of the advanced features associated with MODFLOW parameters including instances
v GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models
v. 10.0 GMS 10.0 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
Objectives This tutorial demonstrates how to perform unsteady sediment transport simulations in SRH-2D.
SMS v. 12.2 SRH-2D Tutorial Objectives This tutorial demonstrates how to perform unsteady sediment transport simulations in SRH-2D. Prerequisites SMS Overview tutorial SRH-2D SRH-2D Sediment Transport
Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.2 GMS 10.2 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v MODPATH GMS 10.3 Tutorial The MODPATH Interface in GMS Prerequisite Tutorials MODFLOW Conceptual Model Approach I
v. 10.3 GMS 10.3 Tutorial The Interface in GMS Objectives Setup a simulation in GMS and view the results. Learn about assigning porosity, creating starting locations, displaying pathlines in different
SMS v Simulations. SRH-2D Tutorial. Time. Requirements. Prerequisites. Objectives
SMS v. 12.1 SRH-2D Tutorial Objectives This tutorial will demonstrate the process of creating a new SRH-2D simulation from an existing simulation. This workflow is very useful when adding new features
SMS v Obstructions. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.1 SRH-2D Tutorial Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should have been completed
v MODFLOW Managing Transient Data GMS 10.3 Tutorial Creating transient MODFLOW models with time-varying inputs
v. 10.3 GMS 10.3 Tutorial Creating transient MODFLOW models with time-varying inputs Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow all data
WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Floodplain Delineation Learn how to us the WMS floodplain delineation tools
v. 9.1 WMS 9.1 Tutorial Hydraulics and Floodplain Modeling Floodplain Delineation Learn how to us the WMS floodplain delineation tools Objectives Experiment with the various floodplain delineation options
v RMA2 Steering Module SMS Tutorials Requirements Time Prerequisites Objectives
v. 12.2 SMS 12.2 Tutorial Objectives Learn how to use revision cards for a spin down simulation in RMA2. Prerequisites Overview Tutorial RMA2 Tutorial Requirements RMA2 GFGEN Mesh Module Time 30 60 minutes
SMS v SRH-2D Tutorials Obstructions. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorials Obstructions Objectives This tutorial demonstrates the process of creating and defining in-stream obstructions within an SRH-2D model. The SRH-2D Simulations tutorial should
GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Horizon Coverages Use horizon coverages to help control the Horizons Solids operation Objectives Learn how to constrain the areal extent of the solids created
v SMS 13.0 Tutorial GIS P Prerequisites Time Requirements Objectives
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct
GMS 10.0 Tutorial Stratigraphy Modeling TIN Surfaces Introduction to the TIN (Triangulated Irregular Network) surface object
v. 10.0 GMS 10.0 Tutorial Stratigraphy Modeling TIN Surfaces Introduction to the TIN (Triangulated Irregular Network) surface object Objectives Learn to create, read, alter, and manage TIN data from within
v MODFLOW Transient Calibration Calibrating transient MODFLOW models GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial MODFLOW Transient Calibration Calibrating transient MODFLOW models Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow
v Mesh Editing SMS 11.2 Tutorial Requirements Mesh Module Time minutes Prerequisites None Objectives
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial lesson teaches manual mesh generation and editing techniques that can be performed using SMS. It should be noted that manual methods are NOT recommended.
OPENING A LEADS.TXT FILE IN EXCEL 2010
From the project manager to a team of administrative, programming, and technical specialists, ATS believes in a team approach that brings together all of the necessary elements pre-conference and onsite
MODFLOW Interpolating Layer Data Interpolating MODFLOW elevations and other data from discrete points
v. 10.3 GMS 10.3 Tutorial Interpolating MODFLOW elevations and other data from discrete points Objectives Learn how to effectively use GMS tools to interpolate MODFLOW layer elevation data and other MODFLOW
v SMS 11.1 Tutorial SRH-2D Prerequisites None Time minutes Requirements Map Module Mesh Module Scatter Module Generic Model SRH-2D
v. 11.1 SMS 11.1 Tutorial SRH-2D Objectives This lesson will teach you how to prepare an unstructured mesh, run the SRH-2D numerical engine and view the results all within SMS. You will start by reading
v Basic FESWMS Analysis SMS 11.2 Tutorial Time minutes Prerequisites Overview Tutorial Requirements FESWMS Fst2dh Mesh Module
v. 11.2 SMS 11.2 Tutorial Objectives This lesson teaches how to prepare a mesh for a FESWMS simulation. Prerequisites Overview Tutorial Requirements FESWMS Fst2dh Mesh Module Time 15-30 minutes Page 1
Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.4 GMS 10.4 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
MODFLOW PEST Pilot Points Use pilot points with PEST to automatically calibrate a MODFLOW model
v. 10.2 GMS 10.2 Tutorial Use pilot points with PEST to automatically calibrate a MODFLOW model Objectives Learn the features and options related to pilot points when used with PEST. Use fixed value pilot
v Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
v Map Module Operations SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial describes the fundamental tools in the Map module of the SMS. This tutorial provides information that is useful when constructing any type of geometric
v CMS-Wave Analysis SMS 12.2 Tutorial Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Objectives This workshop gives a brief introduction to the CMS-Wave interface and model. This model is similar to STWAVE and the tutorial for the models is similar. As with the
v Data Visualization SMS 12.3 Tutorial Prerequisites Requirements Time Objectives Learn how to import, manipulate, and view solution data.
v. 12.3 SMS 12.3 Tutorial Objectives Learn how to import, manipulate, and view solution data. Prerequisites None Requirements GIS Module Map Module Time 30 60 minutes Page 1 of 16 Aquaveo 2017 1 Introduction...
MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models
v. 10.2 GMS 10.2 Tutorial Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation data, and use PEST to calibrate the model. Prerequisite
v Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS feature objects.
v. 10.0 GMS 10.0 Tutorial Importing, displaying, and converting shapefiles Objectives Learn how to import and display shapefiles with and without ArcObjects. Learn how to convert the shapefiles to GMS
v SMS 12.3 Tutorial Import From Web Requirements Internet connection Time minutes Prerequisites None Objectives
SMS 12.3 Tutorial Import from Web v. 12.3 Objectives This tutorial gives an overview of the Importing from Web option offered by SMS. This option connects SMS to a web based program that adds additional
v STWAVE Analysis SMS 11.2 Tutorial Requirements Map Module STWAVE Cartesian Grid Module Scatter Module Prerequisites Time minutes
v. 11.2 SMS 11.2 Tutorial Objectives This workshop gives a brief introduction to the STWAVE modules. Data from the Shinnecock Inlet, Long Island, New York, have been set up as an example. This example
v MODFLOW Advanced PEST Pilot Points, SVD-Assist, Parallel PEST GMS Tutorials Time minutes
v. 10.2 GMS 10.2 Tutorial Pilot Points, SVD-Assist, Parallel PEST Objectives Learn how to parameterize a MODFLOW model and run PEST to obtain optimal parameter values. Experiment with truncated singular
v. 9.1 GMS 9.1 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Prerequisite Tutorials
v. 9.1 GMS 9.1 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation data,
Learn the various 3D interpolation methods available in GMS
v. 10.4 GMS 10.4 Tutorial Learn the various 3D interpolation methods available in GMS Objectives Explore the various 3D interpolation algorithms available in GMS, including IDW and kriging. Visualize the
GMS 8.2 Tutorial Stratigraphy Modeling TIN Surfaces Introduction to the TIN (triangulated irregular network) surface object
v. 8.2 GMS 8.2 Tutorial Introduction to the TIN (triangulated irregular network) surface object Objectives Learn to create, read, alter and manage TIN data from within GMS. Prerequisite Tutorials None
v GMS 10.0 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models
v. 10.0 GMS 10.0 Tutorial MODFLOW PEST Transient Pump Test Calibration Tools for calibrating transient MODFLOW models Objectives Learn how to setup a transient simulation, import transient observation
v TUFLOW 1D/2D SMS 11.2 Tutorial Time minutes Prerequisites TUFLOW 2D Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial describes the generation of a 1D TUFLOW project using the SMS interface. It is strongly recommended that the TUFLOW 2D tutorial be completed before doing
v Mesh Generation SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.3 SMS 12.3 Tutorial Mesh Generation Objectives This tutorial demostrates the fundamental tools used to generate a mesh in the SMS. Prerequisites SMS Overview SMS Map Module Requirements Mesh Module
v SMS Tutorials ADCIRC LTEA Time minutes Prerequisites ADCIRC Tutorial Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives LTEA stands for the Local Truncation Error Analysis. The name refers to an analysis methodology for measuring local truncation error in a numerical analysis. The LTEA
v MT3DMS Conceptual Model Approach GMS 10.3 Tutorial Using MT3DMS with a conceptual model
v. 10.3 GMS 10.3 Tutorial Using MT3DMS with a conceptual model Objectives Learn how to use a conceptual model when using MT3DMS. Perform two transport simulations, analyzing the long-term potential for
v Introduction to WMS Become familiar with the WMS interface WMS Tutorials Time minutes Prerequisite Tutorials None
s v. 10.0 WMS 10.0 Tutorial Become familiar with the WMS interface Objectives Read files into WMS and change modules and display options to become familiar with the WMS interface. Prerequisite Tutorials
v Water Distribution System Modeling Working with WMS Tutorials Building a Hydraulic Model Using Shapefiles Prerequisite Tutorials None
v. 10.1 WMS 10.1 Tutorial Water Distribution System Modeling Working with EPANET Building a Hydraulic Model Using Shapefiles Objectives Open shapefiles containing the geometry and attributes of EPANET
v Working with Rasters SMS 12.1 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 12.1 SMS 12.1 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
Water Distribution System Modeling EPANET. Import an existing water distribution model and modify link and node parameters within WMS
v. 10.1 WMS 10.1 Tutorial Water Distribution System Modeling EPANET Hydraulic Model Import an existing water distribution model and modify link and node parameters within WMS Objectives View an existing
v mod-path3du Transient Particle tracking with a transient MODFLOW-USG model GMS Tutorials Time minutes Prerequisite Tutorials mod-path3du
v. 10.3 GMS 10.3 Tutorial Particle tracking with a transient MODFLOW-USG model Objectives Learn more about GMS's mod-path3du interface and how transient simulations are done. Prerequisite Tutorials mod-path3du
Objectives Learn how to work with projections in WMS, and how to combine data from different coordinate systems into the same WMS project.
s v. 11.0 Projections / Coordinate Systems WMS 11.0 Tutorial Projections / Coordinate Systems Working with map projections in WMS Objectives Learn how to work with projections in WMS, and how to combine
MODFLOW Regional to Local Model Conversion,
v. 10.2 GMS 10.2 Tutorial MODFLOW Regional to Local Model Conversion, Steady State Create a local model from a regional model using convenient tools provided in GMS Objectives Use the convenient tools
v SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
GMS 8.0 Tutorial MODFLOW Managing Transient Data Creating transient MODFLOW models with time-varying inputs
v. 8.0 GMS 8.0 Tutorial Creating transient MODFLOW models with time-varying inputs Objectives GMS provides a powerful suite of tools for inputting and managing transient data. These tools allow all data
Print and export images for use in reports and presentations
v. 10.4 GMS 10.4 Tutorial Print and export images for use in reports and presentations Objectives GMS has a number of ways to print or export images for use in reports and presentations. This tutorial
v SMS 12.3 Tutorial GIS P Prerequisites Time Requirements Objectives
v. 12.3 SMS 12.3 Tutorial Objectives This tutorial demonstrates how to import data, visualize it, and convert it into SMS coverage data that could be used to build a numeric model. This tutorial will instruct
TUFLOW 1D/2D SURFACE WATER MODELING SYSTEM. 1 Introduction. 2 Background Data
SURFACE WATER MODELING SYSTEM TUFLOW 1D/2D 1 Introduction This tutorial describes the generation of a 1D TUFLOW project using the SMS interface. It is recommended that the TUFLOW 2D tutorial be done before
v Getting Started An introduction to GMS GMS Tutorials Time minutes Prerequisite Tutorials None
v. 10.3 GMS 10.3 Tutorial An introduction to GMS Objectives This tutorial introduces GMS and covers the basic elements of the user interface. It is the first tutorial that new users should complete. Prerequisite
Using rasters for interpolation and visualization in GMS
v. 10.3 GMS 10.3 Tutorial Using rasters for interpolation and visualization in GMS Objectives This tutorial teaches how GMS uses rasters to support all kinds of digital elevation models and how rasters
Objectives Divide a single watershed into multiple sub-basins, and define routing between sub-basins.
v. 11.0 HEC-HMS WMS 11.0 Tutorial HEC-HMS Learn how to create multiple sub-basins using HEC-HMS Objectives Divide a single watershed into multiple sub-basins, and define routing between sub-basins. Prerequisite
v MODFLOW Automated Parameter Estimation Model calibration with PEST GMS Tutorials Time minutes
v. 10.1 GMS 10.1 Tutorial Model calibration with PEST Objectives Learn how to calibrate a MODFLOW model using PEST. Prerequisite Tutorials MODFLOW Model Calibration Required Components Grid Module Map
Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
v. 10.3 GMS 10.3 Tutorial The MODFLOW drain return package Objectives Learn about the MODFLOW drain return package (DRT) interface in GMS and compare the package to the regular MODFLOW drain (DRN) package.
MT3DMS Advanced Transport MT3DMS dispersion, sorption, and dual domain options
v. 10.1 GMS 10.1 Tutorial MT3DMS dispersion, sorption, and dual domain options Objectives Learn about the dispersion, sorption, and dual domain options in MT3DMS Prerequisite Tutorials MT2DMS Grid Approach
Create a SEAWAT model in GMS using the conceptual model approach
v. 10.4 GMS 10.4 Tutorial Create a SEAWAT model in GMS using the conceptual model approach Objectives Learn to create a SEAWAT model in GMS using the conceptual model approach. Use the GIS tools in the
Objectives This tutorial shows how to use the Map Flood tool to quickly generate floodplain data.
v. 11.0 WMS 11.0 Tutorial Creating a Objectives This tutorial shows how to use the Map Flood tool to quickly generate floodplain data. Prerequisite Tutorials Introduction to WMS Required Components Scatter
WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 10.1 WMS 10.1 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain
v. 8.4 WMS 8.4 Tutorial Hydraulics and Floodplain Modeling Simplified Dam Break Learn how to run a dam break simulation and delineate its floodplain Objectives Setup a conceptual model of stream centerlines
v SMS 12.2 Tutorial Import from Web Requirements None Time minutes Prerequisites None Objectives
v. 12.2 SMS 12.2 Tutorial Import from Web Objectives This lesson is designed to give an overview of with the Importing from Web option offered by SMS. This option connects SMS to a web based program that
MODFLOW LGR Create MODFLOW-LGR models with locally refined grids using GMS
v. 10.1 GMS 10.1 Tutorial MODFLOW LGR Create MODFLOW-LGR models with locally refined grids using GMS Objectives GMS supports building MODFLOW-LGR models with nested child grids. This tutorial shows the
Stratigraphy Modeling Horizons and Solids
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Horizons and Solids Create solids from boreholes using the Horizons Solids tool. Objectives Learn how to construct a set of solid models using the horizon
Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation in GMS.
v. 9.1 GMS 9.1 Tutorial Using rasters for interpolation and visualization in GMS Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation
GMS 8.0 Tutorial MODFLOW Interpolating Layer Data Interpolating MODFLOW elevations and other data from discrete points
v. 8.0 GMS 8.0 Tutorial Interpolating MODFLOW elevations and other data from discrete points Objectives Learn how to effectively use GMS tools to interpolate MODFLOW layer elevation data and other MODFLOW
GMS Tutorials MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach
GMS Tutorials MODFLOW Conceptual Model Approach I GMS 10.4 Tutorial MODFLOW Conceptual Model Approach 2 Adding drains, wells, and recharge to MODFLOW using the conceptual model approach v. 10.4 Objectives
v Editing Elevations DEM Basics Import, view, and edit digital elevation models WMS Tutorials Time minutes Prerequisite Tutorials None
v. 11.0 WMS 11.0 Tutorial Import, view, and edit digital elevation models Objectives Learn to import DEMs from an online database, set the display options for an imported DEM, and view and edit the DEM