British Airways : Boeing [Assembly Instructions]
|
|
- Willis Webb
- 5 years ago
- Views:
Transcription
1 British Airways : Boeing-00 [Assembly Instructions] Front Over look Side Underside This British Airways Boeing -00 papercraft is modelled on the British Airways plane of the same name. The red and blue mark on the nose, referred to as the Speedbird, is the British Airways (BA) logo mark. The design of the mark has undergone changes over the years, however, the name "Speedbird" has remained the same since the days of BOAC, which was a predecessor of BA. Even today, air traffic controllers and pilots refer to BA planes not as British Airway but as "Speedbirds" in communications. The exterior view of the Boeing is characterized by a two-story cabin. The cockpit is located at the front tip of the second floor, making the pilot's eye line m above the ground. The first floor has no cockpit but is wholly used for passenger seating, and the shape of the pointed tip can be seen from the inside. The Boeing -00 measures 0.m in length, with a.m wingspan and height of.m. Its maximum takeoff weight is. tons, and it can cover distances of,0 km. Assembly Process Attach the parts in order. A~L No. of Parts You can choose to make either a grounded style (with wheels) or an in-flight style (without wheels) aircraft. *Glue, scissors and other tools may be dangrous to young children so be sure to keep them out of the reach of young children. Completed Model (Total length) About 0mm (Scale About :) (Total width) About 0mm Pattern pages (No.of Parts: ) Assembly Instructions pages This model was designed for Papercraft and may differ from the original in some respects. *Bulid the model by carefully reading the Assembly Instractions, in the parts sheet page order. Assembly Tip Small pieces will be easier to cut out if you fold along the lines first. Cut them out after you have folded them. Before gluing each piece, be sure to compare its shape to the corresponding surface to ensure it is the correct piece. Folds & Marks Glue spot Tools Trace along the folds with a ruler and a used pen (no ink) to get a sharper, easier fold. Mountain fold line Valley fold line Cut out Assemble in the direction indicated by the arrow Each glue spot has a mark indicating how to attach it. Glue to the front of the other part Glue to the rear of the other part Glue within the same part Glue the rear of this part Scissors, glue (We recommend craft glue), ruler, tweezer, stencil pen, used pen (no ink).
2 British Airways : Boeing-00 [Assembly Instructions]. A A A A A 0 J J. Choose whether to make a grounded model or in-flight model. If making a grounded model A A A A A0 0 A 0 J If making an in-flight model A A A A0 0 A J Front side Back side Cut out parts A0, J and J along the red lines. J Attach A to this position. J J J A0
3 0 0 0 A A A A A0 A A A A A A A A A A A C C B B 0 A A J J.. J J British Airways : Boeing-00 [Assembly Instructions]
4 British Airways : Boeing-00 [Assembly Instructions]. Choose whether to make a grounded model or in-flight model. If making a grounded model B B 0 E Cut out parts B and B along the red lines. B B B B 0 B B B If making an in-flight model B B B E B B B 0 B B B
5 British Airways : Boeing-00 [Assembly Instructions].. Choose whether to make a grounded model or in-flight model. H0 H H If making a grounded model E H E 0 H H E H H H H F 0 0 E E G E If making an in-flight model H H H 0 H H0 0 H H H H H When making the grounded style model, cut out parts E and E along the red lines. E E E E
6 British Airways : Boeing-00 [Assembly Instructions]. F F When making the grounded style model, cut out parts F and G along the red lines. F 0 0 F0 F E E0 G 0 0 G G0 F F G. G G G 0 0
7 F F F G G G G G H H H H H H H H H H0 H H H H H H H H H H0 0 B 0 H J J0 F F 0.. British Airways : Boeing-00 [Assembly Instructions]
8 British Airways : Boeing-00 [Assembly Instructions]. K K E B B B B 0 0 When making the grounded style model, cut out parts K and K along the red lines. K K E K K. B C B0 0 B B0 0 C B K B K When making the grounded style model, cut out parts B and B along the red lines. B
9 British Airways : Boeing-00 [Assembly Instructions].. D K0 K B K C 0 C K K 0 C 0 K C C C K
10 British Airways : Boeing-00 [Assembly Instructions]. C 0 C C C C C C 0 C K C C K C. D D C C0. Carry out this step if making a grounded model. Make eighteen pairs. H H H 0 D 0 D C C C C0 0 C
11 British Airways : Boeing-00 [Assembly Instructions].Carry out this step if making a grounded model. 0.Carry out this step if making a grounded model..carry out this step if making a grounded model. D D D D D D D D D D D D0 0 D D D D D D D D0 0 Parts made during step Parts made during step 0 D Parts made during step Parts made during step Parts made during step Parts made during step Parts made during step Parts made during step Parts made during step Parts made during step
12 British Airways : Boeing-00 [Assembly Instructions]. Carry out this step if making a grounded model. E E E 0 Parts made during step Parts made during step E0 E E E Parts made during step Parts made during step. Carry out this step if making a grounded model. E E0 E Parts made during step Parts made during step 0 E E E Parts made during step Parts made during step E
13 British Airways : Boeing-00 [Assembly Instructions]. Make four pairs. I I I I I I 0 I I I I I0 I I 0 I 0 I.. D Parts made during step D E Parts made during step D E D Parts made during step Parts made during step 0
14 British Airways : Boeing-00 [Assembly Instructions]. Carry out this step if making a grounded model. E D E Parts made during step D 0 Parts made during step Parts made during step 0. L 0 L L L L L 0 0 L L D 0 D D0 D 0 Parts made during step Parts made during step
2015/08 Hideo Nakano PAPER TUBE ROCKET (revised)
2015/08 Hideo Nakano nh1886@yahoo.co.jp PAPER TUBE ROCKET (revised) Introduction The paper tube rocket consists of a tubular rocket body and a set of stabilizer fins. Teachers and students can print out
More informationRocket Activity Pop! Rockets
Rocket Activity Pop! Rockets Objective Students design, construct, and launch paper rockets. Description A rocket with a triangular cross section is made from three rocket-shaped strips of card-stock paper
More informationAERONAUTICAL RESEARCH JOURNAL Name
AERONAUTICAL RESEARCH JOURNAL Name June 2013 Edition Brooklyn Aerodrome Flight School 2 Table of Contents 1 Paper Airplanes... 5 Research: Describing Flight... 6 Experiment: Bullet vs. Dart... 7 Design:
More informationSummary of Project: Materials and Resources Needed: Key Vocabulary
Title: Baby 3-D Mobiles Author: Theresa D. State: Texas Grade Span: 6-8 Subject: Mathematics Assignment Type: Individual, Small group Recommended Time Frame: 2 weeks (2 weekends) if outside of class time;
More informationDUNREEB CUTOUT INSTRUCTIONS FOR THE PROGRAM
DUNREEB CUTOUT INSTRUCTIONS FOR THE PROGRAM Contents 1 General 5 1.1 Overview.................................... 5 1.2 Features.................................... 5 1.3 Remarks....................................
More informationTransformations in the Plane - Activity 1 Reflections in axes and an oblique line.
Name: Class: p 5 Maths Helper Plus Resource Set. Copyright 00 Bruce A. Vaughan, Teachers Choice Software Transformations in the Plane - Activity Reflections in axes and an oblique line. ) On the diagram
More informationConstructing Tessellations Using Translations and Refl ections
Constructing Tessellations Using Translations and Refl ections Focus on After this lesson, you will be able to... identify how translations and reflections can be used to create a tessellation create tessellating
More informationTutorial: How to make low poly car. By Jirayu Tanabodee
Tutorial: How to make low poly car. By Jirayu Tanabodee I think I would prefer to make my own cars than using stock cars in FSX. Since the cars in FSX always turn their head lamp on, so it is not realistic
More informationAppendix B. Example Mathematics Items. Grade 4 and Grade 8
Appendix B Example Mathematics Items Grade 4 and Grade 8 Example Mathematics Items: Grade 4 Example Mathematics Items: Grade 4 1 * Which two of these lines are parallel? a 1 and 2 b 1 and 3 c 2 and 3 d
More informationlearning outcomes 10 min.
Reflecting light Light H 49 time 60 minutes Tip. In this lesson every child makes their own periscope. If you prefer they can also work in pairs or small groups. learning outcomes To: know that light always
More informationPolyhedron Nets. National Standards (NCTM) 21 st Century Skills. Middle School
Polyhedron Nets Middle School National Standards (NCTM) 21 st Century Skills Instructional programs from prekindergarten through grade 12 in Geometry should enable each and every student to Analyze characteristics
More informationPop! Rockets. Rocket Activity. Students design, construct, and launch paper rockets.
Rocket Activity Pop! Rockets Students design, construct, and launch paper rockets. A rocket with a triangular cross section is made from three rocket-shaped strips of card-stock paper and launched with
More informationExperiment 3: Reflection
Model No. OS-8515C Experiment 3: Reflection Experiment 3: Reflection Required Equipment from Basic Optics System Light Source Mirror from Ray Optics Kit Other Required Equipment Drawing compass Protractor
More informationGrade 6 Math Circles. Spatial and Visual Thinking
Faculty of Mathematics Waterloo, Ontario N2L 3G1 Introduction Grade 6 Math Circles October 31/November 1, 2017 Spatial and Visual Thinking Centre for Education in Mathematics and Computing One very important
More informationGeometry Lesson Polyhedron Nets. National Standards
Geometry Lesson Polyhedron Nets National Standards Instructional programs for Algebra grades 6 th -8 th should enable all students to: Precisely describe, classify, and understand relationships among types
More informationRhino 3D - Digital Crafting Tutorial instructions for simple shape fabrication. Triangulation
Rhino 3D - Digital Crafting Tutorial instructions for simple shape fabrication Triangulation Manuel Kretzer 2016 1. Draw or import your geometry into the Rhino workspace. 2. Use _Mesh to transform NURBS
More informationPopup Workshop Version 2.0 Documentation. February 2007
Appendix C Popup Workshop Documentation Popup Workshop Version 2.0 Documentation February 2007 Susan Hendrix, hendrixs@cs.colorado.edu Craft Technology Group http://l3d.cs.colorado.edu/ ctg C.1 Introduction
More informationNetwork Object Architectures (NOA) for Avionics Wednesday 20th June 10.00am 1.00pm
www.ruggedfiberoptics.com Network Object Architectures (NOA) for Avionics Wednesday 20th June 10.00am 1.00pm Spring 2018 Aircraft Network Problems Today 1. Complexity Point to point and point to multi-point
More informationTESSELLATIONS #1. All the shapes are regular (equal length sides). The side length of each shape is the same as any other shape.
TESSELLATIONS #1 Arrange for students to work in pairs during this lesson. Each pair of students needs unlined paper and two tessellation sets, one red and one blue. Ask students in each pair to share
More informationOPERATING INSTRUCTIONS:
List OPERATING INSTRUCTIONS: Preparation For Installation, Product Identification Charging The Batteries ing And Adjusting The Lift Mounting Head s Brackets Mounting Clamps And Quick-Locking Arms Installation
More informationNets of Three-Dimensional Objects
Nets of Three-Dimensional Objects Focus on After this lesson, you will be able to... determine the correct nets for 3-D objects build 3-D objects from nets draw nets for 3-D objects rectangular prism a
More informationGeometry. Set 1. Daily Practice And Answer Keys
Geometry Set 1 Daily Practice And Answer Keys Website: http://alex.state.al.us/ccrs/node/314 Name Date Daily Practice Geometry DAY 1 1. The figure above is shaded on the top side and white on the under
More informationGoogle Pixel 2 Back Camera Lens Replacement
Google Pixel 2 Back Camera Lens Replacement How to replace the camera lens in the Google Pixel 2. Written By: Monica Andres ifixit CC BY-NC-SA www.ifixit.com Page 1 of 17 INTRODUCTION The camera is a component
More informationA Quick Spin on Autodesk Architectural Studio
December 2-5, 2003 MGM Grand Hotel Las Vegas A Quick Spin on Autodesk Architectural Studio Mario Guttman, AIA Kevin Durham Christie Landry (Instructor) (Assistant) (Assistant) BD13-5L Autodesk Architectural
More informationCreating Escher-Style Tessellations
Creating Escher-Style Tessellations Focus on After this lesson, you will be able to... create tessellations from combinations of regular and irregular polygons describe the tessellations in terms of the
More informationAlgebra and Geometry Institute Summer 2006 Faculty Name: Maxine Williams School: Bell Elementary / Boyle, Ms Grade Level: 4 VOLUME OF A CUBE
Algebra and Geometry Institute Summer 2006 Faculty Name: Maxine Williams School: Bell Elementary / Boyle, Ms Grade Level: 4 VOLUME OF A CUBE Teaching Objective(s) Finding the volume of a cube and identifying
More informationGetting Started Guide
UX-App Getting Started Guide Contents Keyboard Shortcuts... 2 Basic Shortcuts... 2 Component Manipulation... 2 Working with groups... 3 Grid Control... 3 Context Menu... 4 User Interface... 5 Managing
More informationMJC8Q400, Special Features guide
MJC8Q400, Special Features guide This special features guide describes the functionality which is addon-specific and is not found in the system or flight tutorial. Switches and knobs All the switches and
More informationCARDSTOCK MODELING Math Manipulative Kit. Student Activity Book
CARDSTOCK MODELING Math Manipulative Kit Student Activity Book TABLE OF CONTENTS Activity Sheet for L.E. #1 - Getting Started...3-4 Activity Sheet for L.E. #2 - Squares and Cubes (Hexahedrons)...5-8 Activity
More informationSTAAR Category 3 Grade 7 Mathematics TEKS 7.9D. Student Activity 1
Student Activity 1 Work with your partner to answer the following questions. Problem 1: A triangular prism has lateral faces and faces called bases. The bases are in the shape of a. The lateral faces are
More informationGeometry. Students at Dommerich Elementary helped design and construct a mosaic to show parts of their community and local plants and animals.
Geometry Describing and analyzing two-dimensional shapes Students at Dommerich Elementary helped design and construct a mosaic to show parts of their community and local plants and animals. 479 Make a
More informationGCSE 4353/02 MATHEMATICS (UNITISED SCHEME) UNIT 3: Calculator-Allowed Mathematics HIGHER TIER
Surname Centre Number Candidate Number Other Names 0 GCSE 4353/02 MATHEMATICS (UNITISED SCHEME) UNIT 3: Calculator-Allowed Mathematics HIGHER TIER A.M. MONDAY, 11 November 2013 1 hour 45 minutes For s
More informationSMMG October 14 th, 2006 featuring Dr. Michael Starbird Circles, Rings, and Tractors: Clever Cleaving for Finding Formulas
SMMG October 14 th, 2006 featuring Dr. Michael Starbird Circles, Rings, and Tractors: Clever Cleaving for Finding Formulas 1. The Polygon Sweep a) On one of the colored pieces of construction paper you
More information29 GEOMETRY AND MEASURE: AREA AND VOLUME
29 GEOMETRY AND MEASURE: AREA AND VOLUME Recognise units of measurement used for length, area and volume Know and apply formulae to calculate area of triangles, circles, parallelograms and trapezia Calculate
More informationITEC185. Introduction to Digital Media SKETCHUP MAKE I
ITEC185 Introduction to Digital Media SKETCHUP MAKE 2016 - I What is SketchUp? It s software that lets you use your computer to create models of objects and buildings in three dimensions. It's not hard
More information3d Profiler and Profile Manager
3d Profiler and Profile Manager The 3 Profiler is a technology as well as a series of objects and tools. ll the objects and tools rely on profiles or shapes to function. Profiles can be anything from standard
More informationSTRATUS HORIZON PRO Pilot s Guide
Getting Started STRATUS HORIZON PRO Pilot s Guide The Stratus Horizon Pro app works with Stratus portable ADS-B receivers to show real-time AHRS (attitude, heading, and reference system) data of your aircraft
More informationPhysics 1CL WAVE OPTICS: INTERFERENCE AND DIFFRACTION Fall 2009
Introduction An important property of waves is interference. You are familiar with some simple examples of interference of sound waves. This interference effect produces positions having large amplitude
More informationIf of material is available to make a box with a square base and an open top, find the largest possible volume of the box.
1 Find two positive numbers whose product is 64 and whose sum is a minimum. 2 Consider the following problem: A farmer with 870 ft of fencing wants to enclose a rectangular area and then divide it into
More informationUnit 5.6 3D Modelling
Unit 5.6 3D Modelling Year Group: 5 Number of Lessons: 4 Year 5 Medium-term Plan Lesson Aims Success Criteria 1 To be introduced to 2Design and Make. 2 To explore the effect of moving points when designing.
More informationPRINT AT HOME KIT EDITING & PRINTING TIPS
PRINT AT HOME KIT EDITING & PRINTING TIPS Step-by-Step Editing + Printing Tips (5 x 7 Invitations) Step 1: Select and open your invite in builder. Replace sample text in the template by highlighting the
More informationIntroduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons
Introduction To Inkscape Creating Custom Graphics For Websites, Displays & Lessons The Inkscape Program Inkscape is a free, but very powerful vector graphics program. Available for all computer formats
More informationPRINT A 3D MODEL PLANE
PRINT A 3D MODEL PLANE STEP BY STEP INSTRUCTIONS ON HOW TO PREPARE A 3D MODEL PLANE FOR 3D PRINTING USING TINKERCAD CONTENT: BACKGROUND Page 2 1. 3D Printing What s that? 2 PREPARATION Pages 2-12 2. Let
More informationCONDITION 7 NOTIFICATION:
3 rd May 2011 Philip Groves Postcomm Hercules House 6 Hercules Road LONDON SE1 7DB Simon Oates Director of Regulatory Strategy 100 Victoria Embankment, London, EC4Y 0HQ simon.oates@royalmail.com Copied
More informationVisio Price $ (inc GST)
1800 ULEARN (853 276) www.ddls.com.au Visio 2013 Length 2 days Price $913.00 (inc GST) Overview The skills and knowledge acquired in Microsoft Visio 2013 are sufficient to be able to create real-world
More informationLuggage Tag. 1. Open Creative DRAWings. 2. Left click on on the new design menu.
Luggage Tag 1. Open Creative DRAWings. 2. Left click on on the new design menu. 3. Left click on and then in the circle next to New graphic. 4. For the hoop, select None. 5. Choose the desired fabric type
More informationBATD Basic Aircraft Training Device Appendix B) Components Description Reviewed:
Model Serial Number Tail Number BATD Operator Setup and instrument description of the Basic Aircraft Training Device (BATD), which includes the following sections, modules and instruments to simulate the
More informationSeries. Student. Space and Shape. My name
Series Student Space and Shape My name Copyright 2009 3P Learning. All rights reserved. First edition printed 2009 in Australia. A catalogue record for this book is available from 3P Learning Ltd. ISN
More informationHow to Make a Poster Using PowerPoint
How to Make a Poster Using PowerPoint 1997 2010 Start PowerPoint: Make a New presentation a blank one. When asked for a Layout, choose a blank one one without anything even a title. Choose the Size of
More informationDESIGN to Save Money on. Direct Mail Postage TIPS
DESIGN to Save Money on Direct Mail Postage TIPS 1 These days everyone wants to do things faster and more economically. The United States Postal Service is no exception. As a result, mail that can be processed
More informationLANCER / LANCER EVOLUTION (2008 ) REAR VIEW CAMERA MZ380462EX INSTALLATION AND HANDLING INSTRUCTIONS
LANCER / LANCER EVOLUTION (2008 ) REAR VIEW CAMERA MZ380462EX INSTALLATION AND HANDLING INSTRUCTIONS Navigation (MMCS) unit Camera Thank you for purchasing the Mitsubishi Genuine Accessory. To install
More informationGRADE 5 SUPPLEMENT. Set D3 Measurement: Area of Polygons. Includes. Skills & Concepts
GRADE 5 SUPPLEMENT Set D3 Measurement: Area of Polygons Includes Activity 1: Area of Parallelograms, Part 1 D3.1 Activity 2: Area of Parallelograms, Part 2 D3.9 Activity 3: Area of Right Triangles D3.19
More informationCARDSTOCK MODELING Math Manipulative Kit. Revised July 25, 2006
CARDSTOCK MODELING Math Manipulative Kit Revised July 25, 2006 TABLE OF CONTENTS Unit Overview...3 Format & Background Information...3-5 Learning Experience #1 - Getting Started...6-7 Learning Experience
More informationMathematics Success Grade 8
T616 Mathematics Success Grade 8 [OBJECTIVE] The student will explore angle relationships within triangles. [PREREQUISITE SKILLS] angles, congruency, supplementary angles, adjacent angles [MATERIALS] Student
More informationMethods in Mathematics
Write your name here Surname Other names Pearson Edexcel GCSE Centre Number Candidate Number Methods in Mathematics Unit 2: Methods 2 For Approved Pilot Centres ONLY Foundation Tier Wednesday 12 November
More informationAREA Judo Math Inc.
AREA 2013 Judo Math Inc. 6 th grade Problem Solving Discipline: Black Belt Training Order of Mastery: Area 1. Area of triangles by composition 2. Area of quadrilaterals by decomposing 3. Draw polygons
More informationInDesign Basics. Adobe
Adobe InDesign Basics Craig Polanowski 1. Begin by creating a new document. Chances are pretty good that you will want to turn off the facing pages setting and create single pages instead of spreads. One
More informationA publication of. Let it Bleed. When, where, why and how to use bleeds and create print ready PDF s so your print provider will love you.
A publication of Let it Bleed When, where, why and how to use bleeds and create print ready PDF s so your print provider will love you. When Let it Bleed: Creating print ready PDF s with bleeds A bleed
More informationEasier Reading in Windows 7 Programs
Easier Reading in Windows 7 Programs The Key Mada Assistive Technology Center Tel: 00 974 44594050 Fax: 00 974 44594051 Email: info@mada.org.qa Contents Introduction... 3 Using a scroll mouse or laptop
More informationWritten By: Adam O'Camb
Remove or replace the display assembly on a Google Pixel 2. Written By: Adam O'Camb ifixit CC BY-NC-SA www.ifixit.com Page 1 of 11 INTRODUCTION Use this guide to replace a cracked or faulty screen, including
More informationG2-1 Lines Pages 70 71
G2-1 Lines Pages 70 71 CURRICULUM REQUIREMENT AB: required BC: required MB: required ON: required Goals Students will identify straight and curved lines and sides, and open and closed lines. PRIOR KNOWLEDGE
More informationMath 8 Shape and Space Resource Kit Parent Guide
Math 8 Shape and Space Resource Kit Parent Guide Resources Included with this Resource Kit (To be Returned to HCOS): Parent Guide Student worksheets Jenga blocks (game) Set of mini geosolids (Right Start
More informationFundamentals. Training Kit. Presentation Products, Inc. 632 W 28th St, 7th fl New York, NY f presentationproducts.
Fundamentals Training Kit Presentation Products, Inc. 632 W 28th St, 7th fl New York, NY 10001 212.736.6350 f 212.736.6353 presentationproducts.com Table of Contents Getting Started How Does the SMART
More informationL E S S O N 2 Background
Flight, Naperville Central High School, Naperville, Ill. No hard hat needed in the InDesign work area Once you learn the concepts of good page design, and you learn how to use InDesign, you are limited
More informationSONTARA PRODUCT PORTFOLIO
SONTARA PRODUCT PORTFOLIO 2015 1 SONTARA EC RANGE 2 SONTARA EC & EC LIGHT IN FLAT BULK Sontara EC wipes are all-purpose, engineered cloth with exceptional absorbency, strength and low-linting properties,
More informationTSS. Event CAD Tutorial. Event Hire Software. Software Solutions for the Event Hire Industry. 2D/3D Layout and Presentation. T S Solutions Limited
Event Hire Software - Software Solutions for the Event Hire Industry - Event CAD Tutorial 2D/3D Layout and Presentation T S Solutions Limited T S Solutions Limited Tel: 0117 956 4571 Email: info@tssweb.net
More informationPower Series Camera Support
Power Series Camera Support Power Jib Power Column Power Dolly Power Series Camera Support Equipment Assembly Manual Remark: Before assemble the jib, please check the inventory and read this manual carefully
More informationFrequently Asked Questions
Frequently Asked Questions 1. General Questions 2. Agency Administrator 3. Agency Employee 4. Additional Questions related to Servicing General Questions: How can I contact the Support Centre? In case
More informationROTOPOD PERISCOPE LIGHTING KIT
ROTOPOD PERISCOPE LIGHTING KIT (for ULTIMATE Periscopes) 14-MAR-2013_rev 2.0 I designed the Periscope Lighting Kit to be as flexible as possible. Every LED is individually controllable. I have provided
More informationThe playhead, shown as a vertical red beam, passes each frame when a movie plays back, much like movie fi lm passing in front of a projector bulb.
The project: AIRPLANE I will show you a completed version of this project.. Introducing keyframes and the Timeline One of the most important panels in the Flash workspace is the Timeline, which is where
More informationWorking with Text/Edit Panel
Section 8A Working with Text/Edit Panel - Adding Text Working with Text/Edit Panel Cricut Design Space makes it easy to personalize your project using text, and different fonts. You can use Cricut fonts
More informationLines of Symmetry. Grade 3. Amy Hahn. Education 334: MW 8 9:20 a.m.
Lines of Symmetry Grade 3 Amy Hahn Education 334: MW 8 9:20 a.m. GRADE 3 V. SPATIAL SENSE, GEOMETRY AND MEASUREMENT A. Spatial Sense Understand the concept of reflection symmetry as applied to geometric
More informationKodak EasyShare M381 Lens/Optics Replacement
Kodak EasyShare M381 Lens/Optics Replacement Use this guide to replace the lens. Written By: Christina Hamby ifixit CC BY-NC-SA www.ifixit.com Page 1 of 10 INTRODUCTION Technology in the lens can often
More informationWhere we are. HOW do we apply the concepts of quadratics to better understand higher order polynomials?
A. Lesson Context BIG PICTURE of this UNIT: How & why do we build NEW knowledge in Mathematics? What NEW IDEAS & NEW CONCEPTS can we now explore with specific references to POLYNOMIAL FUNCTIONS AND RATIONAL
More informationCAD Tutorial 23: Exploded View
CAD TUTORIAL 23: Exploded View CAD Tutorial 23: Exploded View Level of Difficulty Time Approximately 30 35 minutes Starter Activity It s a Race!!! Who can build a Cube the quickest: - Pupils out of Card?
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More informationHow can the surface area of a three-dimensional figure be determined?
1.3 Surface Area Consider the groceries in the photograph. What three-dimensional geometric figures do you recognize? Is it a coincidence that so many packages are in these shapes? Think about: the cost
More informationMaking a custom foot model tutorial
Making a custom foot model tutorial Goal: Making a customized 3D printable foot model. Pre-request: you should have downloaded 123D app on your smart phone, and download Meshmixer on your computer as well.
More informationSystems of Linear Equations and Graphs
8.1 Systems of Linear Equations and Graphs Focus on explaining the meaning of the point of intersection of two linear equations solving systems of linear equations by creating graphs, with and without
More informationST02949CH FAA Supplemental Type Certificate
ST02949CH FAA Supplemental Type Certificate Installation of a Rosemount Aerospace 87600E1 Class 3 Electronic Flight Bag (EFB) System on Boeing 737 Series Aircraft (FAA STC ST02949CH) OVERVIEW FAA STC ST02949CH.
More informationANATOMY OF A BIT TM how you can tell top from bottom. four on the floor!
NIGHT LIGHT BASICS 1 Learn BITSNAP ANATOMY OF A BIT TM how you can tell top from bottom. TOP BOTTOM BIT FEET 2 which COLOR-CODED BY FUNCTION Bits TM are grouped into four different categories, are color-coded.
More informationPolygons. 5 sides 5 angles. pentagon. no no R89. Name
Lesson 11.1 Polygons A polygon is a closed plane figure formed by three or more line segments that meet at points called vertices. You can classify a polygon by the number of sides and the number of angles
More informationAssignment 6: Matlab Practice and Plots
CEE 3804: Computer Applications in Civil Engineering Spring 2012 Solution Set Problem 1 Assignment 6: Matlab Practice and Plots Instructor: Trani A civil engineer sends you a comma separated data file
More informationSage Estimating (SQL) v18.12
Sage Estimating (SQL) v18.12 On-Screen Takeoff Integration Guide October 2018 This is a publication of Sage Software, Inc. 2018 The Sage Group plc or its licensors. All rights reserved. Sage, Sage logos,
More informationObjective: Analyze and classify triangles based on side length, angle measure or both.
NYS COMMON CORE MATHEMATICS CURRICULUM Lesson 13 4 4 Lesson 13 Objective: Analyze and classify triangles based on side length, angle measure or Suggested Lesson Structure Fluency Practice Application Problem
More informationCCM Unit 10 Angle Relationships
CCM6+7+ Unit 10 Angle Relationships ~ Page 1 CCM6+7+ 2015-16 Unit 10 Angle Relationships Name Teacher Projected Test Date Main Concepts Page(s) Unit 10 Vocabulary 2-6 Measuring Angles with Protractors
More informationIn this exercise you will be creating the graphics for the index page of a Website for children about reptiles.
LESSON 2: CREATING AND MANIPULATING IMAGES OBJECTIVES By the end of this lesson, you will be able to: create and import graphics use the text tool attach text to a path create shapes create curved and
More informationST02612CH FAA Supplemental Type Certificate
ST02612CH FAA Supplemental Type Certificate Installation of AD Aerospace Cockpit Door Monitoring System on Airbus A318, A319, A320, and A321 Series Aircraft (FAA STC ST02612CH) OVERVIEW FAA STC ST02612CH.
More informationARCHITECTURE & GAMES. A is for Architect Simple Mass Modeling FORM & SPACE. Industry Careers Framework. Applied. Getting Started.
A is for Architect Simple Mass Modeling One of the first introductions to form and space usually comes at a very early age. As an infant, you might have played with building blocks to help hone your motor
More informationP03 ray drawing with plane mirrors. November 06, Worlds Best Optical Illusion. Owls. Ray Diagrams.
Worlds Best Optical Illusion http://www.youtube.com/watch?v=haxm0diuyug Owls http://www.youtube.com/watch?v=hoc42xegvt8 Ray Diagrams http://www.youtube.com/watch?v=ed4jexpdwuo&feature=related 1 Locate
More informationTemporal Processing of Millimeter Wave Flight Test Data
Distribution Statement C Distribution authorized to U.S. Government agencies Section and 5 their contractors. Other requests for this document shall be referred to BAE Systems. Note This information is
More informationSamsung Galaxy Note5 Battery Replacement
Remove and replace the battery in the Samsung Galaxy Note5. Written By: Arthur Shi ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION Follow this guide to remove and replace the battery in your
More information3. Prepare all your graphs, illustrations and text by cutting them to size. For straight lines use a guillotine.
Infographic Production Introduction There are multiple ways of making an infographic. Professional designers commonly use graphical illustration packages to compile the various components but a Data Scientist
More information3. Area and perimeter.notebook November 13, All rectangles with area 12cm 2 have the same perimeter. True or false?
All rectangles with area 12cm 2 have the same perimeter. True or false? Find the perimeter of the shape: Draw another shape with area a smaller perimeter. but with x y Write an expression for the perimeter
More informationCodeHS Hour of Code: Teacher Guide
Hour of Code: Teacher Guide BEFORE THE HOUR OF CODE: Make sure student computers have an up-to-date browser (Chrome, Safari, or Firefox). Read through teacher notes in this document. Download notes to
More informationSkills Canada Candidate Project Book. Pan Am Promotion Duration: 6 h. Station number. Level
Skills Canada 2014 Trade 40 Pan Am Promotion Duration: 6 h Graphic Design Candidate Project Book Station number Level Date Mark Skills Compétences Canada 2014 - Toronto Pan Am Games page 1 Project Description
More informationLesson 15 Working with Tables
Working with Tables Computer Literacy BASICS: A Comprehensive Guide to IC 3, 4 th Edition 1 Objectives Create a table and insert text. Insert and delete rows and columns. Adjust column width and row height.
More informationKeyboard Shortcuts. Command Windows Macintosh
S00ILCS5.qxp 3/19/2010 1:11 AM Page 477 Keyboard Shortcuts k Adobe Illustrator CS5 If a command on a menu includes a keyboard reference, known as a keyboard shortcut, to the right of the command name,
More informationThe Best of SketchUp This amazing 3D design program can make you a better woodworker.
The Best of SketchUp This amazing 3D design program can make you a better woodworker. By David Heim More and more woodworkers have switched from T-square and pencil to the SketchUp 3D program to design
More informationI OFFICE TAB... 1 RIBBONS & GROUPS... 2 OTHER SCREEN PARTS... 4 APPLICATION SPECIFICATIONS... 5 THE BASICS...
EXCEL 2010 BASICS Microsoft Excel I OFFICE TAB... 1 RIBBONS & GROUPS... 2 OTHER SCREEN PARTS... 4 APPLICATION SPECIFICATIONS... 5 THE BASICS... 6 The Mouse... 6 What Are Worksheets?... 6 What is a Workbook?...
More information