9.0 References. [Appl89] Applegarth, I., Catley, D., Bradley, I., Clipping of B-spline patches at

Transcription

1 9.0 References [Appl89] Applegarth, I., Catley, D., Bradley, I., Clipping of B-spline patches at surface Curves, The Mathematics of Surfaces III, Clarendon Press, Oxford, 1989, pp [Bohm84] Bohm, W., Farin, G., Kahmann, J., A Survey of Curve and Surface Methods in CAGD, Computer-Aided Design, vol. 1, no.1, July 1984, pp [Casa87] Casale, M.S., Free-form Solid Modeling with Trimmed Surface Patches, IEEE Computer Graphics & Applications, Vol-7, January 1987, pp [Casa89a] Casale, M. S., Bobrow, J. E., Solid Modeling Using Parametric Surfaces Defined Over Non-Square Domains, Proceedings of the Eighth International Conference on Off-shore Mechanics and Arctic Engineering, March 1989, pp References 112

2 [Croc87] Crocker, G.A., Reinke, W.F., Boundary Evaluation of Non-Convex primitives to produce Parametric Trimmed Surfaces, Computer Graphics, Volume 21, Number 4, July 1987, pp [Casa89b] Casale, M. S., Bobrow, J. E., The Analysis of Solids Without Mesh Generation Using Trimmed Patch Boundary Elements, Engineering with Computers, vol. 5, 1989, pp [Chiy91] Chiyokura, H., Takamura, T., Konno, K., Harada, T., G 1 Surface Interpolation over Irregular Meshes with rational Curves, NURBS for Curves and Surface Design, 1991, pp [Davi68] Davis, H.F., Introduction to Vector Analysis 2 nd ed., Allyn and Bacon, Inc., Boston, Massachusetts, [Fari97] Farin, G., Curves and Surfaces for Computer Aided Geometric Design 4 th ed., Academic Press, San Diego, California, [Faro87] Farouki, R. T., Trimmed-Surface Algorithms for the Evaluation and Interrogation of Solid Boundary Representations, IBM Journal of Research and Development, vol. 31, no.3, May 1987, pp References 113

3 [Flem92a] Fleming, S., The Enhancement of PHIGS Plus B-spline Functionality for Geometric Modeling in CAD, Master s thesis, VPI&SU, April [Flem92b] Fleming, S., Myklebust., A., The Enhancement of PHIGS Plus B-spline Functionality for Geometric Modeling in CAD, Fourth IFIP WG5.2 on Geometric Modeling in Computer Aided Design, Rensselaerville, New York, September 27 October 1, [Glou89] Gloudemans, J. R., Filleting of Aircraft Components Using Non-Uniform B- spline Surfaces, Master s thesis, VPI&SU, May [Gray98], Gray, A., Modern Differential Geometry of Curves and Surfaces 2 nd ed., CRC Press LLC, Boca Raton, Florida, [Hosc90] Hoscheck, J., Schneider, F., Spline Conversion for Trimmed Rational Bezier and B-spline surfaces, Computer-Aided Design, vol. 22, no. 9, November 1990, pp [Hosc89] Hoscheck, J., Schneider, F., Wassum, P., Optimal Approximate Conversion of Spline Surfaces, Computer-Aided Geometric Design, vol. 6, 1989, pp [Hosc88] Hoscheck, J., Intrinsic Parameterization for Approximation, Computer- Aided Geometric Design, vol.5, 1988, pp References 114

4 [Hosc87] Hoscheck, J., Approximate Conversion of Spline Curves, Computer-Aided Geometric Design, vol. 4, 1987, pp [Jain99] Jain, A., Error Visualization in Comparison of B-spline Surfaces, Master s thesis, VPI&SU, April [Jone91] Jones, R. W., Intersection and Filleting of Non-Uniform B-spline Surfaces, Master s thesis, VPI&SU, January [Kilg96] Kilgard, M.J., OpenGL, Programming for X Window System, Addison- Wesley Developers Press, [Mort85] Mortenson, M. E., Geometric Modeling, John Wiley & Sons, [Oual97] Oualline, S., Practical C++ Programming, O Reilly &Associates, Inc., [Rock89] Rockwood, A., Heaton, K., Davis, T., Real-Time Rendering of Trimmed Surfaces, Computer Graphics, vol. 4, 1987, pp [Roge90] Rogers, D. F., Adams, J. A., Mathematical elements for Computer Graphics 2 nd ed., Mcgraw-Hill Publishing Company, New York, References 115

5 [Roja94] Rojas, R., Geometric Trimming of B-spline Surfaces, Master s thesis, VPI&SU, July [Shan88] Shantz, M., Chang, S., Rendering Trimmed NURBS with Adaptive Forward Differencing, Computer Graphics, Vol. 22, No. 4, August [Wong90a] Wong, C.K., Intersection of B-spline Surfaces by Elimination method, M.S. Thesis, VPI&SU, September [Woo97] Woo, M., Neider, J., Davis, T., OpenGL, Programming Guide 2 nd ed., Addison-Wesley Developers Press, [Yama88] Yamaguchi, F., Curves And Surfaces in Computer Aided Geometric Design, Springer-Verlag, References 116