Design, Computation and Computer Controlled Devices
|
|
- Frederick Daniels
- 5 years ago
- Views:
Transcription
1 4.212 Design Fabrication Design, Computation and Computer Controlled Devices Prof. Larry Sass Department of Architecture and Planning MIT
2 LECTURE #1 Design Theory of Design Fabrication Fabricating Space
3 [1] Design Process
4 DESIGN PROCESS PROBLEMS Most people have a traditional understanding of CAD CAM & Rapid Prototyping Design is not a end it is an exploration The first output is the beginning of the exploration of design
5 [ design ] [ problem setting ] [ problem solving ] Creativity Engineering
6 PROBLEM SOLVING Many computational solutions can be found on the engineering side of design Lighting software Structural analysis software Parametric software
7 PROBLEM SETTING If all programs analysis space after the space is completed which programs are built for design?
8 DESIGN PROCESS Charles S. Pierce He believed that knowledge will always be comprehended in signs external to the mind which assist the development of thought. John Dewey Action and reflection that we learn from our experiences.
9 object creation reflection manipulation
10
11 EXPLORATORY PROCESS Search for truth in manipulation & representation
12 Problem Setting Concept-Schematics- Programming Design and Development Construction Documentation Construction Administration Problem Solving
13 EXPLORATORY PROCESS USING RAPID PROTOTYPING Search for truth through shape manipulations in CAD & physical representation using RP Devices
14 HOW DOES THIS WORK IN A COMPUTATIONAL ENVIRONMENT? object creation reflection object manipulation reflection
15 HOW DOES THIS WORK IN A COMPUTATIONAL ENVIRONMENT? Rapid manipulators Designers want quick, accurate representations of design ideas Design Fabrication is made of many relationships Relationship of CAD to Devices Relationship of RP Devices to CAD CAM Relationship of RP to assemblies of shapes
16 Industry [ designers ] [ problem setting ] physical representation [ problem solving ] [ engineers]
17 3D Scanning 3D Digitizing Modeling Parametric Modeling Scripting Computer Program Fabrication 1 D - Text 2D Cutting 3 D Printing Assembly
18 1 Design Model Remove Section from original design model
19 2 Design Model 14 model scaled to 7 for laser cutting and 3d printing 7 7
20 3 Construction Model New model created as an overlay of the model cut from the design model. 7 7 New Model Original Model
21 4 Construction Model Model parts for cutting of 1/8 plexi glass and a plaster base
22 Parts are numbered 5 Cut Sheet Cut sheet and 3D model reflecting the final model Cut Sheet
23 Final Design 5 Final Design
24 6 Translation Open files at the laser cutter and set line weights (power and speed).
25
26
27
28 7 Assembly Assemble with minimal glue
29
30
31 [2] Design Fabrication: Physical Representation of Information & the Relationship of Design, Computing and NC Devices
32
33
34
35
36
37
38
39 [3] Fabrication Studio Physical Design Reflection
40 3D 3D Modeling Parametric Computer Scripting Scanning Digitizing Modeling Program Visualization Fabrication 1 D - Text 2 D - Drawings 3 D - Renderings Animation 1 D - Text 2 D - Cutting 3 D - Building Assembly
41 3D 3D Modeling Parametric Computer Scripting Scanning Digitizing Modeling Program Visualization Fabrication 1 D - Text 2 D - Drawings 3 D - Renderings Animation 1 D - Text 2 D - Cutting 3 D - Building Assembly
42 COMPUTER NUMBERICALLY CONTROLLED DEVICES [ building devices ] [ subtraction devices ]
43 [ STUDIO DEVICES ] [ solid forms ] [ cutters ] a b c
44
45 [4] New Languages of Design Complex Designs
46 OUR WORLD IS COMPOSED OF EUCLIDIAN GEOMETRIES Repetition of building parts Means of Measurement Process of Construction NON EUCLIDIAN DESIGN No Repetition of building parts No Means of Measurement Process of Construction based on Self Assembled Parts
47 FABRICATION STUDIOS RP devices to start the process Self Assembled parts A variety of cutting and building devices
48 DESIGN FABRICATION [1] Physical Representation of Information [2] Paperless Design Studios [3] New Languages of Design
Design Production: Constructing freeform designs with rapid prototyping
Design Production: Constructing freeform designs with rapid prototyping 1 Lawrence Sass, PhD 1, Kristina Shea PhD 2, Michael Powell 3 1 Department of Architecture, MIT 2 Arup R+D, Cambridge University
More informationDesign, Computation and Computer Controlled Devices
4.212 Design Fabrication Design, Computation and Computer Controlled Devices Prof. Larry Sass Department of Architecture and Planning MIT LECTURE #4 [1] Designing with Paper [2] Surface Representation
More informationIntroduction to CAD/CAM/CAE
Introduction to CAD/CAM/CAE Introduction CAD(Computer Aided Design) CAM(Computer Aided Manufacturing) CAE(Computer Aided Engineering) Memory capacity, processing speed, Interactive graphics Quality, Cost,
More informationComputer Aided Design Applications MMJ 1543
Computer Aided Design Applications MMJ 1543 Dr Jamaludin Mohd Taib jamalt@fkm.utm.my http://www.fkm.utm.my/~jamalt Lecture 1 1 Computer Aided Design Computer Graphics Geometric Modelling CAD Tools in design
More information1.1: Introduction to Fusion 360
.: Introduction to Fusion 360 Fusion 360 is a cloud- based CAD/CAM tool for collaborative product development. The tools in Fusion enable exploration and iteration on product ideas and collaboration within
More informationPictures by PC Fully integrated 2D/3D design and technical documentation
SCHOTT SYSTEME GmbH 82205 Gilching Telefon 089/348069 www.schott-systeme.de Pictures by PC Fully integrated 2D/3D design and technical documentation SCHOTT SYSTEME GmbH specialises in the development of
More informationAutodesk Fusion 360: Introduction. Overview
Overview Fusion 360 is a cloud-based CAD/CAM tool for collaborative product development. The tools in Fusion enable exploration and iteration on product ideas and collaboration within a product development
More informationReverse Engineering: Mechanical. Dr. Tarek A. Tutunji
Reverse Engineering: Mechanical Dr. Tarek A. Tutunji Mechanical RE References: 1. RE (reverse engineering) as necessary phase by rapid product development by Sokovic and Kopac 2. A Practical Appreciation
More informationA Hands-on Project approach to Teaching Solid Modeling
Paper ID #13155 A Hands-on Project approach to Teaching Solid Modeling Prof. Randy Shih, Oregon Institute of Technology Randy Shih is a Professor in the Manufacturing and Mechanical Engineering and Technology
More informationThe most robust set of 3D CAD capabilities:
The most robust set of 3D CAD capabilities: 3D Part & Assembly Design Automatic 2D Drawing Creation Parametric & Freestyle Surfacing Assembly Management & Performance Sheet Metal Design Mechanism Design
More informationDesign for Self Assembly of Building Components using Rapid Prototyping
Design for Self Assembly of Building Components using Rapid Prototyping Larry Sass MIT The web-address (http://web.mit.edu/ddfg) Design of assemblies will become an area of study when using rapid prototyping
More informationSolidWorks and Laser Cutting
99-353 SolidWorks and Laser Cutting Instructor: Susan Finger TAs: Chelsea Chen, Noel Lau 1.0 Units / 3 days (Micro course) http://courses.ideate.cmu.edu 1 Goals For This Course At the conclusion of this
More informationMaterializing a Design with Plywood
Materializing a Design with Plywood Lawrence Sass 1, Dennis Michaud 2, Daniel Cardoso Digital Design and Fabrication Group, MIT Department of Architecture 1 lsass@mit.edu, 2 jmichaud@mit.edu This paper
More informationModeling 3D Objects: Part 2
Modeling 3D Objects: Part 2 Patches, NURBS, Solids Modeling, Spatial Subdivisioning, and Implicit Functions 3D Computer Graphics by Alan Watt Third Edition, Pearson Education Limited, 2000 General Modeling
More informationMANUFACTURING PROCESSES
MANUFACTURING PROCESSES - AMEM 201 Lecture 7: CNC MACHINE TOOLS 1 CNC MACHINE TOOLS TERMINOLOGY NC Numerical Control CNC Computer Numerical Control CAD Computer Aided Design CAM Computer Aided Manufacturing
More informationSharif University of Technology. Session # Rapid Prototyping
Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # Rapid Prototyping Contents: Rapid prototyping and manufacturing RP primitives Application
More informationWorkshop name: CAD Strategies for 3D Printing
Page 1 of 9 Workshop name: CAD Strategies for 3D Printing Presented by James Novak: Griffith University Lecturer, PhD Candidate, Industrial Designer Activity 1 Parametric Test Models Discussion: Additive
More informationFabrication of partially double-curved surfaces out of flat sheet material through a 3d puzzle approach
Fabrication of partially double-curved surfaces out of flat sheet material through a 3d puzzle approach tn03-081 Abstract The topic of this paper is connection of digital modeling with generative programming
More informationComputer Assisted Technologies in the Development of Prototypes
Computer Assisted Technologies in the Development of Prototypes Simões, José, Leite, Afonso, and Vieitas, José Abstract In the industry computer assisted technologies are being implemented very fast. Most
More informationInteractive Virtual Hands-on Manufacturing
Interactive Virtual Hands-on Manufacturing Martin Jun 1 and Patrick Lee 2 1 Associate Professor, Purdue University, West Lafayette, IN 2 Assistant Professor, University of Vermont, Burlington, VM Current
More informationMIT DIPLOMA IN COMPUTER INTEGRATED MANUFACTURE (LEVEL 5) MN COURSE INFORMATION
CNC Programming Course Code: 22910 To develop CNC programming procedures for machining centres and turning centres. Anyone with an interest in the programming of CNC machinery or in the CAD/CAM industry.
More informationor call
Rhino v4.0 in Architecture - "Shape to Fabrication" Date 8th November 2006 Venue The Graduate Centre, London Metropolitan University, 166-220 Holloway Road, London N7 8DB, United Kingdom map on final page
More informationMT 21_CAD/CAM 3(1-2) Than Lin, Ph.D. Assistant Professor Asian Institute of Technology. Lecture: Week 1
MT 21_CAD/CAM 3(1-2) Lecture: Week 1 Than Lin, Ph.D. Assistant Professor Asian Institute of Technology 1 Grading: Quizzes (5%) Mid-Term Exam (30%) Laboratory Exercises (10%) & Project (15%) and Final Exam
More informationSEOUL NATIONAL UNIVERSITY
Fashion Technology 5. 3D Garment CAD-1 Sungmin Kim SEOUL NATIONAL UNIVERSITY Overview Design Process Concept Design Scalable vector graphics Feature-based design Pattern Design 2D Parametric design 3D
More informationCreo 2.0. Curriculum Guide
Creo 2.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 2.0 from Creo Elements/Pro 5.0 Update to Creo Parametric 2.0 from Pro/ENGINEER Wildfire 4.0 Introduction to Creo Parametric
More informationclustering SVG shapes
Clustering SVG Shapes Integrating SVG with Data Mining and Content-Based Image Retrieval Michel Kuntz Fachhochschule Kaiserslautern Zweibrücken, Germany SVG Open 2010 1 Presentation Overview Context, Problem,
More informationSolids as point set. Solid models. Solid representation schemes (cont d) Solid representation schemes. Solid representation schemes (cont d)
Solid models Solid models developed to address limitations of wireframe modeling. Attempt was to create systems which create only complete representations. Modelers would support direct creation of 3D
More informationAlgorithms and Design Descriptions for Relational Modeling
Algorithms and Design Descriptions for Relational Modeling Kenfield Griffith Department of Architecture Massachusetts Institute of Technology Taro Narahara Department of Architecture Massachusetts Institute
More informationEngineering Drawing II
Instructional Unit Basic Shading and Rendering -Basic Shading -Students will be able -Demonstrate the ability Class Discussions 3.1.12.B, -Basic Rendering to shade a 3D model to apply shading to a 3D 3.2.12.C,
More informationThe most robust set of 3D CAD capabilities:
The most robust set of 3D CAD capabilities: 3D Part & Assembly Design Automatic 2D Drawing Creation Parametric & Freestyle Surfacing Assembly Management & Performance Sheet Metal Design Mechanism Design
More informationGeometric Modeling Lecture Series. Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba
Geometric Modeling 25.353 Lecture Series Prof. G. Wang Department of Mechanical and Industrial Engineering University of Manitoba Introduction Geometric modeling is as important to CAD as governing equilibrium
More informationDr. Aylin Gurkok - Florida International University - College of Engineering - Department of Mechanical and Materials Engineering - Miami
What is CADD? Computer-aided drawing is a technique where engineering drawings are produced with the assistance of a computer and, as with manual drawing, is only the graphical means of representing a
More informationCNC-RP: A Technique for Using CNC Machining as a Rapid Prototyping Tool in Product/Process Development
CNC-RP: A Technique for Using CNC Machining as a Rapid Prototyping Tool in Product/Process Development Matthew Frank Graduate Student mcf113@psu.edu Drs. Sanjay B. Joshi and Richard A. Wysk Department
More informationSuccessful STLs for 3D Printing
HOW-TO GUIDE Successful STLs for 3D Printing OVERVIEW This document will help 3D printing users ensure their STL files produce successful 3D printed parts. It will help them become familiar with popular
More informationSuccessful STLs For Polyjet 3D Printing
POLYJET BEST PRACTICE Successful STLs For Polyjet 3D Printing Overview This document will help PolyJet 3D Printing users ensure their STL files produce successful 3D printed parts. You ll become familiar
More informationBricsCAD. One workflow to design tomorrow.
BricsCAD. One workflow to design tomorrow. BricsCAD is the familiar design platform for all your needs; 2D drafting, 3D modeling, Mechanical design and BIM. 2D/3D CAD Design Toolkit A faster and smarter
More information2.1 Traditional media: sketching and modeling
Chapter 2 Review In this chapter, the importance of two of the traditional media, sketches and models, will be described first. Then, some of the new media that is created by combining various design media
More informationLecture Week 4. Images
Lecture Week 4 Images Images can be used: As a backdrop behind text to create a pictorial framework for the text. As a background for the content. As an icon to represent options that can be selected.
More information============================================================================
25 Free 3D modeling softwares Posted by Waldo - 2011/11/08 14:23 I thought this link may come in handy to a few designers out there. 25 Free Modeling Softwares Posted by admin - 2011/11/08 18:51 Blender
More informationRenderMonkey 1.6. Natalya Tatarchuk ATI Research
RenderMonkey 1.6 Natalya Tatarchuk ATI Research Game Developer Conference, San Francisco, CA, March 2005 Overview > What is RenderMonkey? > What s New In RenderMonkey 1.6? 2 What is RenderMonkey? > Shader
More information414 - Creating 2D Layouts, Schematics and Other 2D Drawings
4 th Generation VLC courtesy of Edison2 414 - Creating 2D Layouts, Schematics and Other 2D Drawings Ricky Black, Draft Product Manager, #SEU13 Agenda: 414 - Creating 2D Layouts, Schematics and Other 2D
More information76 ACADIA22 >> CONNECTING CROSSROADS OF DIGITAL DISCOURSE
Fabrication of Partially Doublecurved Surfaces out of Flat Sheet Material Through a 3D Puzzle Approach Axel Kilian Massachusetts Institute of Technology 1 Introduction Rapid prototyping and CNC machining
More informationInput CAD Solid Model Assemblies - Split into separate Part Files. DXF, IGES WMF, EMF STL, VDA, Rhino Parasolid, ACIS
General NC File Output List NC Code Post Processor Selection Printer/Plotter Output Insert Existing Drawing File Input NC Code as Geometry or Tool Paths Input Raster Image Files Report Creator and Designer
More informationLecture 1 Course Introduction
UMass Lowell Computer Science 91.580.201 Geometric Modeling Prof. Karen Daniels Spring, 2009 Lecture 1 Course Introduction Course Introduction What is Geometric Modeling? Adapted from: Geometric Modeling
More informationGeometric Modeling. Creating 3D solid geometry in a computer! MAE 455 Computer-Aided Design and Drafting
Geometric Modeling Creating 3D solid geometry in a computer! Partial History of Geometric Modeling 1963 Wireframe Computer Graphics Invented (Ivan Sutherland, MIT) 2 Partial History 1964 DAC-1, General
More information6. CAD SOFTWARE. CAD is a really useful tool for every engineer, and especially for all the designers.
6. CAD SOFTWARE CAD is a really useful tool for every engineer, and especially for all the designers. Not only because it makes drawing easier, but because it presents the advantage that if any detail
More informationLeveraging 2D Data in 3D Modeling
Leveraging D Data in 3D Modeling Leveraging D Data in 3D Modeling As more and more companies switch to 3D modeling the question of utilizing existing D data and referenced D data from collaborative sources
More informationA Seminar report On CAD/CAM
A Seminar report On CAD/CAM Submitted in partial fulfillment of the requirement for the award of degree Of Computer Science SUBMITTED TO: SUBMITTED BY: www.studymafia.org www.studymafia.org Preface I have
More informationRAPID PROTOTYPING USING ROBOT WELDING - SLICING SYSTEM DEVELOPMENT
RAPID PROTOTYPING USING ROBOT WELDING - SLICING SYSTEM DEVELOPMENT Fernando Ribeiro and Prof. John Norrish Universidade do Minho University of Wollongong - Faculty of Engineering Electronica Industrial
More informationANSYS Discovery SpaceClaim Capabilities
ANSYS Discovery SpaceClaim Capabilities Rapid Geometry Creation SpaceClaim removes a common geometry bottleneck by putting the power of easy and fast geometry creation into the hands of any designer, engineer,
More informationINTEROPERABILITÀ MODELLAZIONE PARAMETRICA- DIRETTA IN CREO
INTEROPERABILITÀ MODELLAZIONE PARAMETRICA- DIRETTA IN CREO Claudio De Nadai Technical Account Manager Webex, 18/07/2016 AGENDA Direct Modeling in Creo Direct Modeling Use Cases The Round-Trip Summary &
More informationLecture 7. Neutral File. Lecture 7 1
Lecture 7 Neutral File Lecture 7 1 What is neutral file? Without neutral file, we requires 2 N number of translator for N numbers of software. Translator Computer Computer Computer Computer Computer Neutral
More informationComputer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping
Computer Aided Engineering Applications 3. Advanced Manufacturing 3.5 NC programming 3.6 Automated Manufacturing systems 3.7 Rapid prototyping Engi 6928 - Fall 2014 3.5 Part programming Structure of an
More informationRapid Prototyping Rev II
Rapid Prototyping Rev II D R. T A R E K A. T U T U N J I R E V E R S E E N G I N E E R I N G P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N 2 0 1 5 Prototype A prototype can be defined as a model
More informationSAMPLE COURSE OUTLINE DESIGN GENERAL YEAR 11
SAMPLE COURSE OUTLINE DESIGN GENERAL YEAR 11 Copyright School Curriculum and Standards Authority, 2014 This document apart from any third party copyright material contained in it may be freely copied,
More informationDesigned objects visualization with Autodesk CAD systems
Designed objects visualization with Autodesk CAD systems Authors: Tilmute Pilkaite, Kaunas University of Technology, Lithuania, tilma@ktu.lt Nomeda Puodziuniene, Kaunas University of Technology, Lithuania,
More informationTOOLPATHS TRAINING GUIDE. Sample. Distribution. not for MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR
TOOLPATHS TRAINING GUIDE MILL-LESSON-4-TOOLPATHS DRILL AND CONTOUR Mill-Lesson-4 Objectives You will generate a toolpath to machine the part on a CNC vertical milling machine. This lesson covers the following
More informationDesign smarter with powerful, easy-to-use 3D CAD solutions
Creo Parametric Essentials Packages Design smarter with powerful, easy-to-use 3D CAD solutions PTC s 3D CAD product design solution, Creo Parametric, gives you the right tools to achieve the highest quality
More informationSTUDY OF THE IMPACT OF THE RAPID PROTOTYPING METHOD ON THE PERFORMANCES OF A DESIGN PROCESS
STUDY OF THE IMPACT OF THE RAPID PROTOTYPING METHOD ON THE PERFORMANCES OF A DESIGN PROCESS Daniel-Constantin Anghel, Nadia Belu University of Pitesti, Romania KEYWORDS Rapid prototyping, DSM, design experiment,
More informationLive Classroom Curriculum Guide
Curriculum Guide Live Classroom Curriculum Guide Creo Elements/Pro 5.0 (formerly Pro/ENGINEER Wildfire 5.0) Update from Pro/ENGINEER Wildfire 4.0 Creo Elements/Pro 5.0 (formerly Pro/ENGINEER Wildfire 5.0)
More informationReverse Engineering Tool to improve quality and efficiency of design, manufacture and analysis.
Reverse Engineering Tool to improve quality and efficiency of design, manufacture and analysis. INTRODUCTION The Internet and technology in general has forever changed the world. This dawning of the technical
More informationPARAMETRIC MODELING FOR MECHANICAL COMPONENTS 1
PARAMETRIC MODELING FOR MECHANICAL COMPONENTS 1 Wawre S.S. Abstract: parametric modeling is a technique to generalize specific solid model. This generalization of the solid model is used to automate modeling
More informationSOLIDWORKS DESIGN TO MANUFACTURING PROCESS SOLUTION
SOLIDWORKS DESIGN TO MANUFACTURING PROCESS SOLUTION DESIGN, VISUALIZE, COMMUNICATE, VALIDATE, COST, MANUFACTURE, INSPECT, COMPOSE, AND MANAGE ALL IN ONE ENVIRONMENT. For years, companies have survived
More informationPhysical Prototyping. Noah Posner
Physical Prototyping Noah Posner Who am I? Who am I? Who am I? What are we doing? What are we doing? What are we doing? What are we doing? Creation of physical prototypes The model making process Tools
More informationAutodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2]
11/29/2006-5:00 pm - 6:30 pm Room:Marcello - 4404 (MSD Campus) Autodesk Inventor 11 Certified User and Expert Exam Preparation Class [Part 2] Daniel Banach - MasterGraphics MA25-3 See MA24-2: Autodesk
More informationCurriculum Guide. Creo 4.0
Curriculum Guide Creo 4.0 Live Classroom Curriculum Guide Update to Creo Parametric 4.0 from Creo Parametric 3.0 Introduction to Creo Parametric 4.0 Advanced Modeling using Creo Parametric 4.0 Advanced
More informationIntroduction to Solid Modeling Parametric Modeling. Mechanical Engineering Dept.
Introduction to Solid Modeling Parametric Modeling 1 Why draw 3D Models? 3D models are easier to interpret. Simulation under real-life conditions. Less expensive than building a physical model. 3D models
More informationPASSPORT. Become a SolidWorks Expert CADTEK S TRAINING INCLUDED COURSES:
SolidWorks TRAINING CADTEK S TRAINING PASSPORT Become a SolidWorks Expert Our training passport is the perfect solution to achieving a high quality skillset and full competency in the SolidWorks software
More informationIntroduction. tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT
tthink[box] OMAX 5555 JetMachining Center Tutorial: Drawing and Toolpath Generation With Intelli-MAX LAYOUT Introduction The OMAX 5555 Jetmachining Center is a precision abrasive jet machining tool. It
More informationAssembly Modeling & Assembling Parts
This week you will learn assembly modeling & assembling parts. The steps to follow are: Assembly modeling Assembly hierarchy Assembly constraints Configurations Assembly strategy 1 Creating Assembly Components
More informationComputer Graphics at University of Toronto
Computer Graphics at University of Toronto 2 Modeling 5 Geometry Processing is biology 6 Geometry processing studies the life of a shape birth e.g., scan of a physical object or modeling in Maya 7 Geometry
More informationLive Classroom Curriculum Guide
Curriculum Guide Live Classroom Curriculum Guide Milling using Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER Mechanica Simulation using Pro/ENGINEER Wildfire 4.0 Introduction to Pro/ENGINEER Wildfire 4.0 Pro/ENGINEER
More informationBIM Goes to School AUTODESK REVIT BUILDING INFORMATION MODELING. BIM in the Architectural Curriculum. Savannah College of Art and Design, USA
AUTODESK REVIT BUILDING INFORMATION MODELING As BIM adoption grows in the building industry, so does the use of BIM in educational curricula. This white paper focuses on how BIM is being leveraged within
More informationmanufactured parts carry good precision, excellent surface precision and high flexibility. This Baan-Chyan, Taipei, Taiwan, 220, R.O.C.
The Approach of Complex Insert Packaging Fabrication in Stereolithography Y. Y. Chiu * and J. H. Chang ++ Department of Industrial and Commercial Design, Oriental Institute of Technology, 58, Sec. 2, Syh-Chuan
More informationOperation Trajectory Control of Industrial Robots Based on Motion Simulation
Operation Trajectory Control of Industrial Robots Based on Motion Simulation Chengyi Xu 1,2, Ying Liu 1,*, Enzhang Jiao 1, Jian Cao 2, Yi Xiao 2 1 College of Mechanical and Electronic Engineering, Nanjing
More informationAutodesk Inventor : From Concept to Digital Prototype
Autodesk Inventor : From Concept to Digital Prototype Bryan Fields Advanced Solutions, Inc. MA305-5 Using the tools available in Autodesk Inventor, this session will look at the progression from concept
More informationChapter 2. Literature Review
Chapter 2 Literature Review This chapter reviews the different rapid prototyping processes and process planning issues involved in rapid prototyping. 2.1 Rapid Prototyping Processes Most of the rapid prototyping
More informationCreo 3.0. Curriculum Guide
Creo 3.0 Curriculum Guide Live Classroom Curriculum Guide Update to Creo Parametric 3.0 from Creo Parametric 2.0 Introduction to Creo Parametric 3.0 Advanced Modeling using Creo Parametric 3.0 Advanced
More informationSurface skeleton generation based on 360-degree profile scan
Surface skeleton generation based on 360-degree profile scan The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Citation As Published
More informationReasoning Boolean Operation for Modeling, Simulation and Fabrication of Heterogeneous Objects. Abstract
Reasoning Boolean Operation for Modeling, Simulation and Fabrication of Heterogeneous Objects X. Hu, T. Jiang, F. Lin, and W. Sun Department of Mechanical Engineering and Mechanics, Drexel University,
More informationHomework Set 2. A brief discussion
Homework Set 2 A brief discussion Homework Set 2 A brief discussion (#%" (#$" ("!#'"!#&"!#%"!#$"!"!" )" (!" ()" $!" $)" *!" *)" %!" Problem 4 Hick s Law or Fitt s Law? MT = a + b ID ID = log 2 ( A W +
More informationCOMPUTER AIDED REVERSE ENGINEERING SYSTEM USED FOR CUSTOMIZED PRODUCTS
COMPUTER AIDED REVERSE ENGINEERING SYSTEM USED FOR CUSTOMIZED PRODUCTS Oancea, Gh.; gh.oancea@unitbv.ro Ivan, N.V.; nivivan@unitbv.ro Pescaru, R.; rfolosea@unitbv.ro Abstract: Computer Aided Reverse Engineering
More informationSolid Edge ST7. Re-imagine What s Possible. Greenpower electric vehicle courtesy of the Huntsville Center of Technology
Re-imagine What s Possible Greenpower electric vehicle courtesy of the Huntsville Center of Technology you over 1300 customer requests satisfied Take your designs to the next level with faster, more flexible
More informationGeometric Modeling. Creating 3D solid geometry in a computer! Partial History of Geometric Modeling
Geometric Modeling Creating 3D solid geometry in a computer! Partial History of Geometric Modeling 1963 Wireframe Computer Graphics Invented (Ivan Sutherland, MIT) 2 1 Partial History 1964 DAC-1, General
More informationto Market Faster Bringing Innovative Medical Products inspiration
white paper Bringing Innovative Medical Products to Market Faster inspiration SUMMARY To succeed in today s medical device manufacturing industry, product designers must not only create innovative medical
More informationComputer Integrated Manufacturing
Computer Integrated anufacturing Performance Objectives 1 Fundamentals Demonstrate the ability to store, retrieve copy, and output drawing files depending upon system setup. Show-e Content Show-e Goals
More informationDIGITAL DESIGN STRATEGIES
INTERNATIONAL DESIGN CONFERENCE - DESIGN 2004 Dubrovnik, May 18-21, 2004. DIGITAL DESIGN STRATEGIES H. Bier Keywords: digital design, methodologies of digital design, education of digital design, learning
More informationJob Layout & Cutting Options in Fiery XF and Fiery proserver
Job Layout & Cutting Options in Fiery XF and Fiery proserver Wide Format Series Kerry Moloney Field & Channel Marketing Manager Fiery Wide Format John Nate WW Technical Product Training Manager Fiery Wide
More informationThe All-in-One Solution for General Design, BIM and Mechanical
The All-in-One Solution for General Design, BIM and Mechanical Bricsys represents the future of the.dwg format, with comprehensive workflows for general design, mechanical design and BIM. Here s the best
More informationSOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID EDGE SOLID
SOLID EDGE SHEET METAL Solutions for Sheet Metal The sheet metal mode is the best I have ever used. I would put it up against anything available today. Bob Martin, Computer-Aided Engineering Magazine review
More informationLASER & PUNCH CAM SOFTWARE
LASER & PUNCH CAM SOFTWARE www.metamation.com MetaCAM s easy to use and powerful drafting system helps you breeze through part creation. Each drawing icon is designed to morph into several operations using
More information3D Modeling and Design Glossary - Beginner
3D Modeling and Design Glossary - Beginner Align: to place or arrange (things) in a straight line. To use the Align tool, select at least two objects by Shift left-clicking on them or by dragging a box
More informationEPUB - HOW TO USE SOLID EDGE GUIDE DOCUMENT
27 April, 2018 EPUB - HOW TO USE SOLID EDGE GUIDE DOCUMENT Document Filetype: PDF 389.59 KB 0 EPUB - HOW TO USE SOLID EDGE GUIDE DOCUMENT This will help you get the most from a powerful technique to create
More informationFastcut Automation Software. AP100US Offline Programming for Laser, Turret Punch Press, and Laser/Punch Combination Machines
Fastcut Automation Software AP100US Offline Programming for Laser, Turret Punch Press, and Laser/Punch Combination Machines Proven Technology and Value Overview AP100US is the most widely used CAD/CAM
More informationReverse Engineering: Printed Circuit Boards Rev II
Reverse Engineering: Printed Circuit Boards Rev II DR. T A R E K A. T U T U N J I R E V E R S E E N G I N E E R I N G P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N 2 0 1 5 References PCB Reverse
More informationIntegrated Model-Based Manufacturing for Rapid Product and Process Development
Integrated Model-Based Manufacturing for Rapid Product and Process Development Vesna Mandic 1, Radomir Radisa 2, Vladan Lukovic 1, and Milan Curcic 1 1 Faculty of Engineering University of Kragujevac,
More informationDesign. Design. Associate Degrees. Certificates. Contact Information. Full-Time Faculty. Associate in Arts Degrees. Certificate of Achievement
Associate Degrees Associate in Arts Degrees Architectural Computer-Aided Computer-Aided and Engineering Technology Mechanical Students may earn one of the above-named associate degrees by completing a
More informationDEVELOPMENT OF 3D BIT-MAP-BASED CAD AND ITS APPLICATION TO HYDRAULIC PUMP MODEL FABRICATION
DEVELOPMENT OF 3D BIT-MAP-BASED CAD AND ITS APPLICATION TO HYDRAULIC PUMP MODEL FABRICATION Tarou Takagi *, Tatsuro Yashiki *, Yasushi Nagumo *, Shouhei Numata * and Noriyuki Sadaoka * * Power and Industrial
More informationSolid Edge. Key features 2D Drafting Design and drafting Foundation Classic Premium
Solid Edge software is a complete hybrid 2D/3D CAD system that uses synchronous technology for accelerated design, faster revisions and better imported re-use to help companies design better. Solid Edge
More informationRevit MEP. Autodesk Navisworks
What is BIM? Autodesk BIM is an intelligent model-based process that helps owners and service providers achieve business results by enabling more accurate, accessible, and actionable insight throughout
More information