PCAN-USB CAN Interface for USB. User Manual. Document version ( )
|
|
- Gabriel Murphy
- 6 years ago
- Views:
Transcription
1 PCAN-USB CAN Interface for USB User Manual Document version ( )
2 Products taken into account Product Name Model Part Number PCAN-USB IPEH PCAN-USB opto-decoupled Galvanic isolation for CAN interface IPEH The cover picture shows the product PCAN-USB opto-decoupled. CANopen and CiA are registered community trade marks of CAN in Automation e.v. All other product names mentioned in this document may be the trademarks or registered trademarks of their respective companies. They are not explicitly marked by or PEAK-System Technik GmbH PEAK-System Technik GmbH Otto-Roehm-Strasse Darmstadt Germany Phone: +49 (0) Fax: +49 (0) Document version ( ) 2
3 Contents 1 Introduction Properties at a Glance System Requirements Scope of Supply 7 2 Installing the Software and the Adapter 8 3 Connecting the CAN Bus D-Sub Connector Supplying External Devices via the CAN Connector Cabling Termination Example of a Connection Maximum Bus Length 14 4 Operation Status LED Unplugging the USB Connection Distinguishing Several PCAN-USB Adapters 15 5 Using the Software CAN Monitor PCAN-View for Windows Receive/Transmit Tab Trace Tab PCAN-USB Tab Status Bar Linking Own Programs with PCAN-Basic Features of PCAN-Basic Principle Description of the API Notes about the License 25 3
4 6 Technical Specifications 26 Appendix A CE Certificate 28 Appendix B Dimension Drawings 29 Appendix C Quick Reference 30 4
5 1 Introduction The PCAN-USB adapter enables simple connection to CAN networks. Its compact plastic casing makes it suitable for mobile applications. The opto-decoupled version guarantees galvanic isolation of up to 500 Volts between the PC and the CAN side. Device drivers and programming interfaces exist for different operating systems, so programs can easily access a connected CAN bus. Tip: At the end of this manual (Appendix C) you can find a Quick Reference with brief information about the installation and operation of the PCAN-USB adapter. 1.1 Properties at a Glance Adapter for the USB connection (USB 1.1, compatible with USB 2.0 and USB 3.0) Voltage supply via USB Bit rates from 5 kbit/s up to 1 Mbit/s Time stamp resolution approx. 42 μs Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID) CAN-Bus connection via D-Sub, 9-pin (in accordance with CiA 102) NXP SJA1000 CAN controller, 16 MHz clock frequency NXP PCA82C251 CAN transceiver Galvanic isolation on the CAN connection up to 500 V (only PCAN-USB opto-decoupled) 5
6 5-Volts supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter Extended operating temperature range from -40 to 85 C (-40 to 185 F) Note: This manual describes the use of PCAN-USB adapter with Windows. You can find device drivers for Linux and the corresponding application information on the provided DVD in the directory branch Develop and on our website under System Requirements A vacant USB port (USB 1.1 or USB 2.0) at the computer or at a self-powered USB hub connected to the computer Operating system Windows 8, 7, Vista (32/64-bit) or Windows CE 6.x (x86 and ARMv4 processor support) or Linux (32/64-bit) Note: Do not use a USB extension cable to connect the PCAN- USB adapter to the computer. The use of an extension cable does not comply with the USB specification and can lead to malfunction of the adapter. 6
7 1.3 Scope of Supply PCAN-USB in plastic casing Device drivers for Windows 8, 7, Vista and Linux (32/64-bit) Device driver for Windows CE 6.x (x86 and ARMv4 processor support) PCAN-View CAN monitor for Windows 8, 7, Vista (32/64-bit) PCAN-Basic programming interface consisting of an interface DLL, examples, and header files for all common programming languages Manual in PDF format 7
8 2 Installing the Software and the Adapter This chapter covers the software setup for the PCAN-USB adapter under Windows and the connection of the adapter to the computer. Setup the driver before connecting the PCAN-USB adapter to the computer for the first time. Do the following to install the driver: 1. Make sure that you are logged in as user with administrator privileges (not needed for normal use of the PCAN-USB adapter later on). 2. Insert the supplied DVD into the appropriate drive of the computer. Usually a navigation program appears a few moments later. If not, start the file Intro.exe from the root directory of the DVD. 3. On the page English > Drivers activate the entry PCAN-USB. 4. Click on Install now. The setup program for the driver is executed. 5. Follow the instructions of the program. Tip: If you don't want to install the CAN monitor PCAN-View for Windows onto the hard disk together with the driver, you have the option to start the program later directly from DVD without prior installation. 8
9 Do the following to connect the PCAN-USB adapter to the computer and complete the initialization: Note: Do not use a USB extension cable to connect the PCAN- USB adapter to the computer. The use of an extension cable does not comply with the USB specification and can lead to malfunction of the adapter. 1. Connect the PCAN-USB adapter to a USB port of the computer or of a connected USB hub. The computer can remain powered on. Windows notifies that new hardware has been detected. 2. The drivers are found and installed by Windows. 3. Afterwards you can work as user with restricted rights again. After the initialization process is finished successfully the red LED on the PCAN-USB adapter is illuminated. 9
10 3 Connecting the CAN Bus 3.1 D-Sub Connector A High-speed CAN bus (ISO ) is connected to the 9-pin DSub connector. The pin assignment for CAN corresponds to the specification CiA 102. Figure 1: Pin assignment High-speed CAN (view onto connector of the PCAN-USB adapter) With the pins 1 and 9 devices with low power consumption (e.g. bus converters) can be directly supplied via the CAN connector. At delivery these pins are not assigned. You can find a detailed description about the activation in the following section 3.2. Tip: You can connect a CAN bus with a different transmission standard via a bus converter. PEAK-System offers different bus converter modules (e.g. PCAN-TJA1054 for a Low-speed CAN bus according to ISO ). 10
11 3.2 Supplying External Devices via the CAN Connector On the PCAN-USB board (casing opened) a 5-Volt supply can optionally be routed to pin 1 and/or pin 9 of the D-Sub connector (PCAN-USB opto-decoupled: pin 1 only). Thus devices with low power consumption (e.g. external bus converters) can be directly supplied via the CAN connector. When using this option the 5-Volt supply is connected to the power supply of the computer and is not fused separately. The optodecoupled model of the adapter contains an interconnected DC/DC converter. Therefore the current output is limited to 50 ma. Proceed as follows to activate the 5-Volt supply: Attention! Electrostatic discharge (ESD) can damage or destroy components on the PCAN-USB board. Take precautions to avoid ESD when handling the card. In order to access the board open the casing of the PCAN-USB adapter by cautiously pushing in the latches on both sides, e.g. with a flat tip screwdriver. Set the solder bridge(s) on the board of the PCAN-USB adapter according to the desired function. During this procedure take especially care not to produce unwanted short circuits on the board. Figure 2 shows the positions of the solder fields JP3 on board of the PCAN-USB (IPEH ) and Figure 3 shows the positions of the solder field R11 on board of the PCAN-USB opto-decoupled (IPEH ). The tables below contain the possible settings. 11
12 Figure 2: PCAN-USB board (IPEH ), solder field JP3 5-Volt supply None Pin 1 Pin 9 Pin 1 + Pin 9 PCAN-USB, solder field JP3 Figure 3: Bottom side of the PCAN-USB opto-decoupled board (IPEH ), solder field R11 5-Volt supply None Pin 1 PCAN-USB opto-decoupled, solder field R11 For reassembly place the board overhead onto the top part of the casing. Ensure that the cable is lying with the strain relief in the cutout of the casing, and that the LED is placed in the corresponding hole. Push the bottom part of the casing onto the top part (the latches click in). 12
13 Attention! Risk of short circuit! If the option described in this section is activated, you may only connect or disconnect CAN cables or peripheral systems (e.g. external bus converters) to or from the PCAN-USB adapter while it is de-energized (the adapter is not connected to the computer). Consider that some computers still supply the USB ports with power even when they are turned off (standby operation). 3.3 Cabling Termination A High-speed CAN bus (ISO ) must be terminated on both ends with 120 Ohms. Otherwise, there are interfering signal reflections and the transceivers of the connected CAN nodes (CAN interface, control device) will not work. The PCAN-USB adapter does not have an internal termination. Use the adapter on a terminated CAN bus Example of a Connection Figure 4: Simple CAN connection In this example, the PCAN-USB adapter is connected with a control unit by a cable that is terminated at both ends. 13
14 3.3.3 Maximum Bus Length High-Speed-CAN networks may have bit rates of up to 1 Mbit/s. The maximum bus length depends primarily on the bit rate. The following table shows the maximum possible CAN bus length at different bit rates: Bit rate Bus length 1 Mbit/s 40 m 500 kbit/s 110 m 250 kbit/s 240 m 125 kbit/s 500 m 50 kbit/s 1.3 km 20 kbit/s 3.3 km 10 kbit/s 6.6 km 5 kbit/s 13.0 km The listed values have been calculated on the basis of an idealized system and can differ from reality. 14
15 4 Operation 4.1 Status LED The PCAN-USB adapter has a red status LED which can be in one of the following conditions: Status On Slow blinking Quick blinking Meaning There's a connection to a driver of the operating system. A software application is connected to the adapter. Data is transmitted via the connected CAN bus. 4.2 Unplugging the USB Connection Under Windows the icon for removing hardware safely is not used with the PCAN-USB adapter. You can unplug the adapter from the computer without any preparation. 4.3 Distinguishing Several PCAN-USB Adapters You can operate several PCAN-USB adapters on a single computer at the same time. The supplied program PCAN-View allows the assignment of device IDs in order to distinguish the adapters in a software environment. Fore more information see section on page
16 5 Using the Software This chapter covers the provided software PCAN-View and the programming interface PCAN-Basic. 5.1 CAN Monitor PCAN-View for Windows PCAN-View for Windows is a simple CAN monitor for viewing, transmitting, and logging CAN messages. Figure 5: PCAN-View for Windows Do the following to start and initialize PCAN-View: 1. If PCAN-View is already installed on the hard disk, open the Windows Start menu, go to Programs > PCAN-Hardware, and select the entry PCAN-View. 16
17 If you haven't installed PCAN-View together with the device driver, you can start the program directly from the supplied DVD. In the navigation program (Intro.exe) go to English > Tools, and under PCAN-View for Windows select the link Start. The dialog box for selecting the CAN hardware and for setting the CAN parameters appears. Figure 6: Selection of the CAN specific hardware and parameters 2. From the list Available CAN hardware select the CAN channel to be used. 3. Select the bit rate that is used by all nodes on the CAN bus from the dropdown list Bit rate. 4. Under Filter settings you can limit the range of CAN IDs to be received, either for standard frames (11-bit IDs) or for extended frames (29-bit IDs). 5. Finally confirm the settings in the dialog box with OK. The main window of PCAN-View appears (see Figure 7). 17
18 5.1.1 Receive/Transmit Tab Figure 7: Receive/Transmit tab The Receive/Transmit tab is the main element of PCAN-View. It contains two lists, one for received messages and one for the transmit messages. Representation of CAN data is in hexadecimal format. Do the following to transmit a CAN message with PCAN-View: 1. Select the menu command Transmit > New Message (alternatively or Ins). The dialog box New Transmit Message is shown. 18
19 Figure 8: Dialog box new transmit message 2. Enter the ID and the data for the new CAN message. 3. The field Cycle Time indicates if the message shall be transmitted manually or periodically. If you want to transmit the message periodically, you must enter a value greater than 0. For a manual-only transmission enter Confirm the entries with OK. The created transmit message appears on the Receive/Transmit tab. 5. You trigger selected transmit messages manually with the menu command Transmit > Send (alternatively Space bar). The manual transmission for CAN messages being transmitted periodically is carried out additionally. Tip: Using the menu command File > Save the current transmit messages can be saved to a list and loaded for reuse later on. 19
20 5.1.2 Trace Tab Figure 9: Trace tab On the Trace tab the data tracer of PCAN-View is used for logging the communication on a CAN bus. During this process the CAN messages are cached in the working memory of the PC. Afterwards they can be saved to a file. The tracer can be configured to run in linear or in ring buffer mode. In linear buffer mode the logging is stopped as soon as the buffer is filled completely. In ring buffer mode the oldest messages are overwritten by incoming ones. 20
21 5.1.3 PCAN-USB Tab Figure 10: PCAN-USB tab With the PCAN-USB tab you can assign a device ID to the adapter. Then it can be clearly identified during operation of several PCAN- USB adapters on a single computer. Furthermore, the current firmware version of the connected adapter is displayed on the tab Status Bar Figure 11: Display of the status bar The status bar shows information about the current CAN connection, about error counters (Overruns, QXmtFull), and shows error messages. You can find further information about the use of PCAN-View in the help which you can invoke in the program via the menu Help or the F1 key. 21
22 5.2 Linking Own Programs with PCAN-Basic Figure 12: PCAN-Basic On the provided DVD you can find files of the programming interface PCAN-Basic in the directory branch Develop. This API provides basic functions for linking own programs to CAN interfaces by PEAK-System and can be used for the following operating systems: Windows 8, 7, Vista (32/64-bit) Windows CE 6.x (x86/armv4) Linux (32/64-bit) The API is designed for cross-platform use. Therefore software projects can easily ported between platforms with low efforts. PEAK- System has created examples for the following programming languages: C++, C#, C++/CLR, Visual Basic, Delphi, Python, and Java. 22
23 5.2.1 Features of PCAN-Basic Supports Windows 8, 7, Vista (32/64-bit), Windows CE 6.x, and Linux (32/64-bit) operating system Multiple PEAK-System applications and your own can be operated on a physical CAN channel at the same time Use of a single DLL for all supported hardware types Use of up to 8 channels for each hardware unit (depending on the PEAK CAN interface used) Simple switching between the channels of a PEAK CAN interface Driver-internal buffer for 32,768 messages per CAN channel Precision of time stamps on received messages up to 1 μs (depending on the PEAK CAN interface used) Access to specific hardware parameters, such as listen-only mode Notification of the application through Windows events when a message is received Extended system for debugging operations Multilingual debugging output Output language depends on operating systems Debugging information can be defined individually An overview of the API functions is located in the header files. You can find detailed information about the PCAN-Basic API on the provided DVD in the text and help files (file name extensions.txt and.chm). 23
24 5.2.2 Principle Description of the API The PCAN-Basic API is the interface between the user application and device driver. In Windows operating systems this is a DLL (Dynamic Link Library). The sequence of accessing the CAN interface is divided into three phases: 1. Initialization 2. Interaction 3. Completion Initialization A CAN channel must be initialized before using it. This is done by the simple call of the function CAN_Initialize. Depending on the type of the CAN hardware, up to eight CAN channels can be opened at the same time. After a successful initialization the CAN channel is ready for communication with the CAN hardware and the CAN bus. No further configuration steps are required. Interaction For receiving and transmitting CAN messages the functions CAN_Read and CAN_Write are available. Additional settings can be made, e.g. setting up message filters to confine to specific CAN IDs or setting the CAN controller to listen-only mode. When receiving CAN messages, events are used for an automatic notification of an application (client). This offers the following advantages: The application no longer needs to check for received messages periodically (no polling). The response time at reception is reduced. 24
25 Completion To end the communication the function CAN_Uninitialize is called in order to release the reserved resources for the CAN channel, among others. In addition the CAN channel is marked as "Free" and is available to other applications Notes about the License Device drivers, the interface DLL, and further files needed for linking are property of the PEAK-System Technik GmbH and may be used only in connection with a hardware component purchased from PEAK-System or one of its partners. If a CAN hardware component of third-party suppliers should be compatible to one of PEAK- System, then you are not allowed to use or to pass on the driver software of PEAK-System. If a third-party supplier develops software based on the PCAN-Basic and problems occur during the use of this software, consult the software provider. 25
26 6 Technical Specifications Connectors Computer CAN USB plug type A D-Sub (m), 9 pins Pin assignment according to specification CiA 102 USB Type USB 1.1, compatible with USB 2.0 CAN Specification Bit rates Controller Transceiver Galvanic isolation Supplying external devices Termination ISO , High-speed CAN 2.0A (standard format) and 2.0B (extended format) 5 kbit/s - 1 Mbit/s NXP SJA1000 NXP PCA82C251 PCAN-USB: none PCAN-USB opto: up to 500 V PCAN-USB: D-Sub pin 1/pin 9; 5 V, max. 100 ma PCAN-USB opto: D-Sub pin 1; 5 V, max. 50 ma Not assigned at delivery none Power supply Supply voltage Power consumption +5 V DC (via USB port) max. 200 ma Continued on the next page 26
27 Environment Operating temperature C ( F) Temperature for storage C ( F) and transport Relative humidity %, not condensing EMC EN 55024: EN 55022: EC directive 2004/108/EG Ingress protection IP20 (IEC 60529) Measures Size (w/o cable) PCAN-USB: 75 x 43 x 22 mm PCAN-USB opto: 87 x 43 x 22 mm Cable length about 0.75 m Weight (with cable) PCAN-USB: 78 g PCAN-USB opto: 83 g 27
28 Appendix A CE Certificate 28
29 Appendix B Dimension Drawings Figure 13: View PCAN-USB Figure 14: View PCAN-USB opto-decoupled The figures don't show the actual size of the product. 29
30 Appendix C Quick Reference Software/Hardware Installation under Windows Before connecting the PCAN-USB adapter to the computer set up the corresponding software package from the supplied DVD (with administrator privileges). Afterwards connect the PCAN-USB adapter to a USB port at your computer. The adapter is recognized by Windows and the driver is initialized. After the installation process is finished successfully the red LED on the adapter is illuminated. Getting Started under Windows Run the CAN monitor PCAN-View from the Windows Start menu as a sample application for accessing the PCAN-USB adapter. For initialization of the PCAN-USB adapter select the desired CAN interface and the CAN bit rate. Status LED On Slow blinking Quick blinking Meaning There's a connection to a driver of the operating system. A software application is connected to the adapter. Data is transmitted via the connected CAN bus. High-speed CAN connector (D-Sub, 9 pins) 30
PCAN-PC Card PC Card to CAN Interface. User Manual V2.1.1
PCAN-PC Card PC Card to CAN Interface User Manual V2.1.1 Products taken into account Product Name Model Part Number PCAN-PC Card Single Channel One CAN channel IPEH-002090 PCAN-PC Card Dual Channel Two
PCAN-PCI PCI to CAN Interface. User Manual V2.1.0
PCAN-PCI PCI to CAN Interface User Manual V2.1.0 Products taken into account Product Name Model Part Number PCAN-PCI Single Channel One CAN channel IPEH-002064 PCAN-PCI Dual Channel Two CAN channels IPEH-002065
PCAN-ExpressCard ExpressCard to CAN Interface. User Manual V2.0.0
PCAN-ExpressCard ExpressCard to CAN Interface User Manual V2.0.0 Products taken into account Product Name Model Item Number PCAN-ExpressCard Single One CAN channel IPEH-003000 Channel PCAN-ExpressCard
PCAN-PCI Express PCI Express to CAN Interface. User Manual V3.2.0
PCAN-PCI Express PCI Express to CAN Interface User Manual V3.2.0 Products taken into account Product Name Model Part Number Ser. No. PCAN-PCI Express Single One CAN channel IPEH-003026 Channel galv. isolated
PCAN-PCI/104-Express PCI/104-Express to CAN Interface. User Manual V2.1.0
PCAN-PCI/104-Express PCI/104-Express to CAN Interface User Manual V2.1.0 Products taken into account Product Name Model Part Number PCAN-PCI/104-Express One CAN channel IPEH-003054 Single Channel PCAN-PCI/104-Express
PCAN-USB CAN Interface for USB. User Manual. Document version ( )
PCAN-USB CAN Interface for USB User Manual Document version 2.5.1 (2017-01-27) Relevant products Product name Model Part number PCAN-USB IPEH-002021 PCAN-USB opto-decoupled Galvanic isolation for CAN interface
PCAN-PCI Express PCI Express to CAN Interface. User Manual V2.0.0
PCAN-PCI Express PCI Express to CAN Interface User Manual V2.0.0 Products taken into account Product Name Model Item Number Ser. no. PCAN-PCI Express Single One CAN channel IPEH-003024 Channel PCAN-PCI
PCAN-PC/104-Plus Quad Four-Channel CAN Interface for PC/104-Plus. User Manual V1.0.1
PCAN-PC/104-Plus Quad Four-Channel CAN Interface for PC/104-Plus User Manual V1.0.1 Products taken into account Product Name Model Part Number PCAN-PC/104-Plus Quad Four CAN channels IPEH-002099 On request
PCAN-ExpressCard CAN Interface for the ExpressCard Slot. User Manual. Document version ( )
PCAN-ExpressCard CAN Interface for the ExpressCard Slot User Manual Document version 2.4.0 (2016-05-11) Relevant products Product name Model Part number PCAN-ExpressCard Single One CAN channel IPEH-003000
PCAN-cPCI CompactPCI to CAN Interface. User Manual V2.0.0
PCAN-cPCI CompactPCI to CAN Interface User Manual V2.0.0 Products taken into account Product Name Model Item Number PCAN-cPCI Dual Channel 2 CAN channels, galvanic IPEH-003021 opto-decoupled isolation
PCAN-PC/104 CAN Interface for PC/104. User Manual V2.2.3
PCAN-PC/104 CAN Interface for PC/104 User Manual V2.2.3 Products taken into account Product Name Model Part number PCAN-PC/104 Single Channel One CAN channel IPEH-002054 PCAN-PC/104 Dual Channel Two CAN
PCAN-cPCI CAN Interface for CompactPCI. User Manual. Document version ( )
PCAN-cPCI CAN Interface for CompactPCI User Manual Document version 2.4.1 (2017-02-09) Relevant products Product name Model Part number PCAN-cPCI Dual Channel 2 CAN channels, galvanic IPEH-003021 opto-decoupled
PCAN-USB Pro CAN/LIN Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB Pro CAN/LIN Interface for High-Speed USB 2.0 User Manual Document version 2.3.1 (2014-04-30) Products taken into account Product Name Model Part number PCAN-USB Pro IPEH-002061 CANopen and CiA
PCAN-ExpressCard 34 CAN Interface for the ExpressCard/34 Slot. User Manual. Document version ( )
PCAN-ExpressCard 34 CAN Interface for the ExpressCard/34 Slot User Manual Document version 1.2.1 (2017-02-10) Relevant products Product name Model Part number PCAN-ExpressCard 34 One CAN channel IPEH-003004
PCAN-USB FD CAN FD Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB FD CAN FD Interface for High-Speed USB 2.0 User Manual Document version 1.3.1 (2017-01-27) Relevant products Product name Model Part number PCAN-USB FD IPEH-004022 CANopen and CiA are registered
PCAN-PCI Express CAN Interface for PCI Express. User Manual. Document version ( )
PCAN-PCI Express CAN Interface for PCI Express User Manual Document version 3.5.1 (2017-01-30) Relevant products Product name Model Part number Ser. no. PCAN-PCI Express Single One CAN channel IPEH-003026
PCAN-PCI/104-Express CAN Interface for PCI/104-Express. User Manual. Document version ( )
PCAN-PCI/104-Express CAN Interface for PCI/104-Express User Manual Document version 2.6.2 (2018-01-10) Relevant products Product name Model Part number Ser.-nr. PCAN-PCI/104-Express Single Channel optodecoupled
PCAN-PC/104-Plus Quad Four-Channel CAN Interface for PC/104-Plus. User Manual. Document version ( )
PCAN-PC/104-Plus Quad Four-Channel CAN Interface for PC/104-Plus User Manual Document version 1.3.1 (2017-01-30) Relevant products Product name Model Part number PCAN-PC/104-Plus Quad Four CAN channels
PCAN-PCI Express FD CAN FD Interface for PCI Express. User Manual. Document version ( )
PCAN-PCI Express FD CAN FD Interface for PCI Express User Manual Document version 1.2.0 (2017-06-15) Relevant products Product name Model Part number PCAN-PCI Express FD Single Channel PCAN-PCI Express
PCAN-Dongle. User Manual. Parallel Port to CAN Interface. Document version ( )
PCAN-Dongle Parallel Port to CAN Interface User Manual Document version 2.0.1 (2017-02-09) Relevant products Product name Model Part number PCAN-Dongle PS/2 IPEH-002019 PCAN-Dongle opto-decoupled PS/2
PCAN-PCI Express. PCI Express to CAN Interface. User Manual
PCAN-PCI Express PCI Express to CAN Interface User Manual Products taken into account Product Name Model Item Number Ser. no. PCAN-PCI Express Single One CAN channel IPEH-003024 Channel PCAN-PCI Express
PCAN-PCI. PCI to CAN Interface. User Manual
PCAN-PCI PCI to CAN Interface User Manual Products taken into account Product Name Model Item Number PCAN-PCI Single Channel One CAN channel IPEH-002064 PCAN-PCI Dual Channel Two CAN channels IPEH-002065
PCAN-USB Pro FD CAN FD and LIN Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB Pro FD CAN FD and LIN Interface for High-Speed USB 2.0 User Manual Document version 1.3.1 (2017-01-27) Relevant products Product name Model Part number PCAN-USB Pro FD IPEH-004061 CANopen and
PCAN-miniPCIe FD CAN FD Interface for PCI Express Mini. User Manual. Document version ( )
PCAN-miniPCIe FD CAN FD Interface for PCI Express Mini User Manual Document version 1.0.1 (2018-08-21) Relevant products Product name Model Part number PCAN-miniPCIe FD Single One CAN channel, galvanic
PCAN-USB X6 CAN FD Interface for High-Speed USB 2.0. User Manual. Document version ( )
PCAN-USB X6 CAN FD Interface for High-Speed USB 2.0 User Manual Document version 1.1.2 (2018-02-22) Relevant products Product name Model Part number PCAN-USB X6 with D-Sub connectors Red corners IPEH-004062
PCAN-M.2 CAN FD Interface for M.2 (PCIe) User Manual. Document version ( )
PCAN-M.2 CAN FD Interface for M.2 (PCIe) User Manual Document version 1.1.0 (2018-04-25) Relevant products Product name Model Part number PCAN-M.2 Single Channel One CAN channel, galvanic IPEH-004083 isolation
PCAN-Dongle. Parallel Port to CAN Interface. User Manual
PCAN-Dongle Parallel Port to CAN Interface User Manual Products taken into account Product Name Model Item Number PCAN-Dongle DIN IPEH-002015 PCAN-Dongle PS/2 IPEH-002019 PCAN-Dongle opto-decoupled PS/2
PCAN-PCI (ISO) Adapter Card PC-PCI to High-speed CAN. User Manual
PCAN-PCI (ISO) Adapter Card PC-PCI to High-speed CAN User Manual Products taken into account Product Name Model Item Number PCAN-PCI Single Channel One CAN channel IPEH-002064 PCAN-PCI Dual Channel Two
PCAN-Optoadapter Plug-on Adapter for Decoupling CAN Networks. User Manual. Document version ( )
PCAN-Optoadapter Plug-on Adapter for Decoupling CAN Networks User Manual Document version 3.0.1 (2013-10-21) Products taken into account Product Name Model Part number PCAN-Optoadapter IPEH-002038 CANopen
PCAN-TJA1054 Bus Converter High-Speed CAN to Low-Speed CAN. User Manual. Document version ( )
PCAN-TJA1054 Bus Converter High-Speed CAN to Low-Speed CAN User Manual Document version 2.1.0 (2013-11-15) Products taken into account Product Name Model Part number PCAN-TJA1054 IPEH-002039 CANopen and
PCAN-Repeater 2-Channel CAN Repeater with galvanic isolation. User Manual V1.0.0
PCAN-Repeater 2-Channel CAN Repeater with galvanic isolation User Manual V1.0.0 Products taken into account Product Name Model Item Number PCAN-Repeater Industry IPEH-004038 All product names mentioned
MU-Thermocouple1 CAN. Temperature Measurement Unit with CAN Connection. User Manual
MU-Thermocouple1 CAN Temperature Measurement Unit with CAN Connection User Manual Products taken into account Product Name Model Item Number MU-Thermocouple1 CAN Metal-cased measuring unit IPEH-002205
PCAN-Repeater DR CAN Repeater for the Decoupling of Bus Segments. User Manual V1.1.0
PCAN-Repeater DR CAN Repeater for the Decoupling of Bus Segments User Manual V1.1.0 Products taken into account Product Name Model Part Number PCAN-Repeater DR Industry IPEH-004038 All product names mentioned
PCAN-Router FD Universal, programmable Converter for CAN FD and CAN. User Manual. Document version ( )
PCAN-Router FD Universal, programmable Converter for CAN FD and CAN User Manual Document version 1.0.1 (2017-01-27) Relevant products Product Name Model Part number PCAN-Router FD 2 D-Sub connectors IPEH-002214
PCAN-Repeater DR CAN Repeater for the Decoupling of Bus Segments. User Manual. Document version ( )
PCAN-Repeater DR CAN Repeater for the Decoupling of Bus Segments User Manual Document version 2.0.0 (2018-02-20) Relevant products Product Name Model Part number PCAN-Repeater DR Industry IPEH-004038 PCAN
PCAN-LIN Interface for LIN, CAN, and RS-232. User Manual. Document version ( )
PCAN-LIN Interface for LIN, CAN, and RS-232 User Manual Document version 2.2.1 (2017-02-03) Relevant products Product Name Model Part number PCAN-LIN High-speed CAN (HS-CAN) IPEH-002025 PCAN-LIN Low-speed
PCAN-B10011S Bus Converter High-speed CAN to Truck-Trailer CAN. User Manual V2.0.0
PCAN-B10011S Bus Converter High-speed CAN to Truck-Trailer CAN User Manual V2.0.0 Products taken into account Product Name Model Part number PCAN-B10011S IPEH-002041 CANopen and CiA are registered community
PCAN-MicroMod Digital 1 & 2 Application-specific PCAN-MicroMod Motherboard. User Manual V1.10.0
PCAN-MicroMod Digital 1 & 2 Application-specific PCAN-MicroMod Motherboard User Manual V1.10.0 Products taken into account Product Name Model Part number PCAN-MicroMod Digital 1 Including casing and PCAN-
PCAN-MicroMod Analog 2 Application-specific PCAN-MicroMod Motherboard. User Manual. Document version ( )
PCAN-MicroMod Analog 2 Application-specific PCAN-MicroMod Motherboard User Manual Document version 1.12.2 (2017-09-12) Relevant products Product Name Model Part number PCAN-MicroMod Analog 2 Including
PCAN-MicroMod Mix 3 Application-specific PCAN-MicroMod Motherboard. User Manual V2.1.0
PCAN-MicroMod Mix 3 Application-specific PCAN-MicroMod Motherboard User Manual V2.1.0 Products taken into account Product Name Model Part number PCAN-MicroMod Mix 3 Including casing and PCAN- IPEH-002206
PCAN-MicroMod Analog 1 Application-specific PCAN-MicroMod Motherboard. User Manual. Document version ( )
PCAN-MicroMod Analog 1 Application-specific PCAN-MicroMod Motherboard User Manual Document version 1.11.3 (2017-09-12) Relevant products Product Name Model Part number PCAN-MicroMod Analog 1 Including
PCAN-MicroMod Mix 2 Application-specific PCAN-MicroMod Motherboard. User Manual. Document version ( )
PCAN-MicroMod Mix 2 Application-specific PCAN-MicroMod Motherboard User Manual Document version 1.11.1 (2014-03-11) Products taken into account Product Name Model Part number PCAN-MicroMod Mix 2 Including
PCAN-MicroMod Mix 2 Application-specific PCAN-MicroMod Motherboard. User Manual. Document version ( )
PCAN-MicroMod Mix 2 Application-specific PCAN-MicroMod Motherboard User Manual Document version 1.11.3 (2017-09-12) Relevant products Product Name Model Part number PCAN-MicroMod Mix 2 Including casing
PCAN-MiniDiag FD PCAN-MiniDiag Diagnostic Device for CAN FD FD Buses. User Manual. Document version ( )
PCAN-MiniDiag FD PCAN-MiniDiag Diagnostic Device for CAN FD FD Buses User Manual Document version 1.0.0 (2019-01-24) Relevant products Product name PCAN-MiniDiag FD Part number IPEH-003070 PCAN is a registered
PCAN-Router Universal CAN Converter. User Manual V1.2.0
PCAN-Router Universal CAN Converter User Manual V1.2.0 Products taken into account Product Name Model Item Number PCAN-Router 2 D-Sub connectors, IPEH-002210 additional digital input PCAN-Router Screw
PLIN-LWL Optical Coupler for LIN Data Transmission. User Manual. Document version ( )
PLIN-LWL Optical Coupler for LIN Data Transmission User Manual Document version 1.1.1 (2017-01-27) Relevant products Product Name Model Part number PLIN-LWL IPEH-004049 All product names mentioned in this
PCAN-B10011S. Converter High-speed CAN to Truck Trailer CAN. User Manual
PCAN-B10011S Converter High-speed CAN to Truck Trailer CAN User Manual Products taken into account Product Name Model Item Number PCAN-B10011S IPEH-002041 Last Updates March 23, 2005 First edition February
PCAN-Flash Windows-Software for Flashing Firmware via CAN. Operation Instructions. Document version ( )
PCAN-Flash Windows-Software for Flashing Firmware via CAN Operation Instructions Document version 1.2.0 (2017-11-20) Relevant products Product Name Model Part number PCAN-Flash from version 2.0 PCAN-Router
PCAN-Router. Universal CAN Converter. User Manual
PCAN-Router Universal CAN Converter User Manual Products taken into account Product Name Model Item Number Ser. no. PCAN-Router 2 D-Sub connectors, additional digital input, LPC2129, 2 kbit EEPROM IPEH-002210
PEAK-System Product Overview
PEAK-System Product Overview 2018 PEAK-System You have a vision... You are working on the future of your company and planning successful products for tomorrow s markets? You want to translate your projects
PEAK-System Product Overview
V. 7/17 PEAK-System Product Overview 2017 Singel 3 B-2550 Kontich Belgium Tel. +32 (0)3 458 30 33 info@alcom.be www.alcom.be Rivium 1e straat 52 2909 LE Capelle aan den Ijssel The Netherlands Tel. +31
PEAK-System Technik. New products for 2010 / Accessories
PEAK-System Technik New products for 2010 / 2011 Accessories PEAK-System >> CAN Interface PCAN-PCI/104-Express PCI/104-Express to CAN Interface The PCAN-PCI/104-Express card allows the connection of two
Mix 2. Motherboard for the PCAN-MicroMod. User Manual
Mix 2 Motherboard for the PCAN-MicroMod User Manual Products taken into account Product Name Model Item Number PCAN-MicroMod Motherboard Including casing and IPEH-002203 Mix 2 PCAN-MicroMod The picture
Wireshark Dissector for PCAN-Gateways IPEH , IPEH ,IPEH (A) User Manual. Document version 1.0 ( )
Wireshark Dissector for PCAN-Gateways IPEH-004010, IPEH-004011,IPEH-004020(A) User Manual Document version 1.0 (2018-07-23) Relevant products Product name Model Part number PCAN-Ethernet Gateway DR PCAN-Wireless
This guide covers the basic operation and use of your PCAN-Diag FD. You can find a detailed documentation in PDF format...
PCAN-Diag FD Quick Start Guide This guide covers the basic operation and use of your PCAN-Diag FD. You can find a detailed documentation in PDF format...... on the PCAN-Diag FD memory card in the directory:
PCAN-Wireless Gateway CAN to WLAN Gateway. User Manual. Document version ( )
PCAN-Wireless Gateway CAN to WLAN Gateway User Manual Document version 1.4.1 (2018-07-10) Relevant products Product Name Model Software Version Part Number PCAN-Wireless Gateway Industry 2.7.0 IPEH-004020
BUS CONVERTER (TJA1054) User Manual
BUS CONVERTER (TJA1054) User Manual Contents 1 License Regulations... 1 2 Overview... 2 3 Application Note... 3 3.1 Pin Assignment of the Sub-D Connectors... 4 3.2 Bus Termination Low-speed CAN... 5 3.3
Kvaser PCI104 User's Guide
Kvaser PCI104 User's Guide Copyright 2008-2011 KVASER AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate in
Mix 2. Motherboard for the PCAN-MicroMod. User Manual
Mix 2 Motherboard for the PCAN-MicroMod User Manual Products taken into account Product Name Model Item Number PCAN-MicroMod Motherboard Mix 2 Including casing and PCAN-MicroMod IPEH-002086 Windows is
PLIN-Slave Test-Slave for the LIN Bus with Various I/Os. User Manual V1.1.0
PLIN-Slave Test-Slave for the LIN Bus with Various I/Os User Manual V1.1.0 Products taken into account Product name Model Part number PLIN-Slave Eval-Board IPEH-004050 All product names mentioned in this
PCAN-PassThru API. User Manual. Pass-Thru API and Connection of Pass-Thru Software to PEAK CAN Interfaces. Document version 1.1.
PCAN-PassThru API Pass-Thru API and Connection of Pass-Thru Software to PEAK CAN Interfaces User Manual Document version 1.1.0 (2017-02-03) CANopen and CiA are registered community trade marks of CAN in
HARDWARE MANUAL ENGLISH
USB-to-CAN V2 Plugin HARDWARE MANUAL ENGLISH HMS Technology Center Ravensburg GmbH Helmut-Vetter-Straße 2 88213 Ravensburg Germany Tel.: +49 751 56146-0 Fax: +49 751 56146-29 Internet: www.hms-networks.de
User Manual. CANopenIA-M0. Starter Kit
User Manual CANopenIA-M0 Starter Kit Edition 8 March 2017 Page 2 of 21 The information given in this document was compiled and checked carefully. Nevertheless ESS assumes no liability for any mistakes.
PCAN-Router Pro 4-Channel CAN Router with Data Logger. User Manual. Document version ( )
PCAN-Router Pro 4-Channel CAN Router with Data Logger User Manual Document version 2.4.0 (2017-08-04) Relevant products Product Name Part number Model PCAN-Router Pro IPEH-002212 Firmware version 1.4.x
USBCAN-I Pro. USB to CAN adapter. User Manual. Ver.:V3.01 (2015/04/22)
USB to CAN adapter Ver.:V3.01 (2015/04/22) Revision History: Ver. Date Reason V1.00 2013/6/16 Create document V2.01 2013/12/20 Fixed working parameters V3.01 2015/04/22 Add some parameters 2 Contents Contents...
Kvaser PC104+ User's Guide
Kvaser PC104+ User's Guide Copyright 2001-2003 KVASER AB, Mölndal, Sweden http://www.kvaser.com Last updated Monday, 13 November 2006 - Printed Monday, 13 November 2006 We believe that the information
Kvaser PCIcanx II User's Guide
Kvaser PCIcanx II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
USB Interface+ User Manual
USB Interface+ User Manual This documentation describes the Easylon USB Interface+ in the versions with EIA-485 ((P.V10303) and with TF/FT (P.V10306) interface Gesytec GmbH Pascalstr. 6 52076 Aachen, Germany
iscan USB User Manual
User Manual Content I Certificate of conformity...1 1 iscan USB...2 2 Installation and commissioning...3 2.1 Installation of the driver software...3 2.2 Installation of the Hardware...4 2.3 Configuration
CPCI-ASIO4 CAN - RS-232, RS-422, RS-485
CPCI-ASIO4 CAN - RS-232, RS-422, RS-485 or TTY-Interface Hardware Manual Document file: I:\texte\Doku\MANUALS\CPCI\ASIO4\Englisch\ASIO4-11H.en9 Date of print: 28.07.2004 PCB-version: CPCI-ASIO4 Rev. 1.0
Kvaser PCIcan II User's Guide
Kvaser PCIcan II User's Guide Copyright 2001-2011 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Last updated Wednesday, 05 September 2012 We believe that the information contained herein was accurate
II. Intelligent PC/CAN Interface USER MANUAL ENGLISH
CAN@net II Intelligent PC/CAN Interface USER MANUAL ENGLISH HMS Technology Center Ravensburg GmbH Helmut-Vetter-Straße 2 88213 Ravensburg Germany Tel.: +49 751 56146-0 Fax: +49 751 56146-29 Internet: www.hms-networks.de
CAN-Bridge. CAN Communications Module for CAN 2.0 A/B, CAN Layer AA01. Manual. Version 1/ from HW 1 & FW 1.00
CAN-Bridge CAN Communications Module for CAN 2.0 A/B, CAN Layer 2 700-660-2AA01 Manual Version 1/26.01.2011 from HW 1 & FW 1.00 Manual order number 700-660-2AA01/en Systeme Helmholz GmbH Hannberger Weg
CAN-ISA/200. ISA to CAN Interface. Hardware Installation and Technical Data. Hardware Installation and Technical Data CAN-ISA/200 Rev. 1.
CAN-ISA/200 ISA to CAN Interface Hardware Installation and Technical Data Manual File: I:\texte\Doku\MANUALS\CAN\ISA\200\ISA2014H.en6 Date of Print: 06.10.2000 Described PCB Version: Rev. 1.0 Changes in
USBCAN-OBD. USB to CAN adapter. User Manual. Document version 3.01 (2015/04/22)
USB to CAN adapter User Manual Document version 3.01 (2015/04/22) Contents 1. Introduction... 3 1.1 Functional Overview... 3 1.2 Properties at a Glance...3 1.3 Typical application... 3 2. Installation...
CAN-USB/2. USB 2.0-CAN-Interface. Hardware Installation and technical Data. to Product C.2066.xx. Installation and technical Data CAN-USB/2 Rev. 1.
CAN-USB/2 USB 2.0-CAN-Interface Hardware Installation and technical Data to Product C.2066.xx esd electronic system design gmbh Vahrenwalder Str. 207 30165 Hannover Germany www.esd-electronics.com Fax:
Kvaser Leaf Light v2 User s Guide
Kvaser Leaf Light v2 User s Guide Copyright 2011-2014 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Thursday 20 th March, 2014 We believe that the information contained herein was accurate in
CU USB-Extender-Rx (USB and DVI Extender) Version: 0.3 Date:
CU8860-0000 USB-Extender-Rx (USB and DVI Extender) Version: 0.3 Date: 2006-02-20 Table of Contents Table of Contents 1 Foreword 1 1.1 Notes on the documentation 1 1.1.1 Liability Conditions 1 1.1.2 Conditions
USB 2.0 RG2324/ Port USB 2.0 Fiber Optic Extender System. User Guide
USB 2.0 RG2324/2344 4-Port USB 2.0 Fiber Optic Extender System User Guide Thank you for purchasing the USB 2.0 RG2324 or RG2344. This document applies to the following part numbers: Please read this guide
USB Interface+ User Manual
USB Interface+ User Manual Gesytec GmbH Pascalstr. 6 52076 Aachen, Germany Tel. + (49) 24 08 / 9 44-0 Fax + (49) 24 08 / 94 4-100 email: info@gesytec.de www.gesytec.com Doc. ID: LVU/UserDoc/LVU_Manual-EN-v1.4.docx,
hipecs-cio100 CANopen I/O module with 16/16 digital I/O
General The hipecs-cio100 is a low cost CANopen unit with 16 digital inputs and 16 digital outputs suitable for 24 V DC applications. The I/O s are positive switching and opto-isolated from the bus and
CPCI-USB-5. CPCI-USB 2.0 Interface with 6 USB Ports. Hardware Manual. to Product I.2326.xx
CPCI-USB-5 CPCI-USB 2.0 Interface with 6 USB Ports Hardware Manual to Product I.2326.xx CPCI-USB-5 Hardware Manual Doc. No.: I.2326.21 / Rev. 1.0 Page 1 of 18 esd electronic system design gmbh Vahrenwalder
PCAN-Diag FD Mobile Diagnostic Device for CAN and CAN FD Busses. User Manual. Document version ( )
PCAN-Diag FD Mobile Diagnostic Device for CAN and CAN FD Busses User Manual Document version 1.0.4 (2018-08-02) Relevant products Product Name Model Part number PCAN-Diag FD IPEH-003069 Charging station
CANCore-I/II. User Manual. Industrial grade CAN module. Ver.:V3.02 (2016/10/22)
CANCore-I/II Industrial grade CAN module User Manual Ver.:V3.02 (2016/10/22) Contents 1. Introduction... 3 1.1 Functional Overview... 3 1.2 Properties at a Glance...3 1.3 Typical application... 4 2. Installation...
Kvaser PCIEcan 2xHS v2 User s Guide
Kvaser PCIEcan 2xHS v2 User s Guide Copyright 2016-2017 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Friday 5 th May, 2017 We believe that the information contained herein was accurate in all
USBCAN-modul 8. Industrial USB to CAN converter. User Manual. Document version 5.0(2017/06/16)
USBCAN-modul 8 Industrial USB to CAN converter User Manual Document version 5.0(2017/06/16) Contents 1. Introduction... 4 1.1 Overview... 4 1.2 Properties at a glance...4 1.3 Typical application... 4 2.
PCAN-Explorer 6. Tel: Professional Windows Software to Communicate with CAN and CAN FD Busses. Software >> PC Software
PCAN-Explorer 6 Professional Windows Software to Communicate with CAN and CAN FD Busses The PCAN-Explorer 6 is a versatile, professional program for working with CAN and CAN FD networks. The user is not
Kvaser USBcan Light 4xHS User s Guide
Kvaser USBcan Light 4xHS User s Guide Copyright 2015-2015 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Monday 21 st September, 2015 We believe that the information contained herein was accurate
Kvaser Eagle EAN:
Kvaser Eagle EAN: 73-30130-00567-9 Kvaser Eagle is a powerful dual channel CAN to standard USB high-speed data logger that is capable of running user-developed scripts. As a flexible, versatile, enhanced
CAN PC Interface. CPC PCIe. User manual
CAN PC Interface User manual User Manual User manual V2 Document version: 2.01 Documentation date: December 22nd, 2017 No part of this document or the software described herein may be reproduced in any
Kvaser Mini PCI Express User s Guide
Kvaser Mini PCI Express User s Guide Copyright 2013-2015 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Monday 21 st September, 2015 We believe that the information contained herein was accurate
Kvaser Leaf Light v2 User s Guide
Kvaser Leaf Light v2 User s Guide Copyright 2011-2016 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Thursday 15 th September, 2016 We believe that the information contained herein was accurate
EMS CPC XTI. CAN-PC Interface. User Manual THOMAS WÜNSCHE. Documentation for CAN-Interface CPC-XTI.
Documentation for CAN-Interface. Document version 1.3. Documentation date: January 17th, 2005. No part of this document or the software described herein may be reproduced in any form without prior written
Kvaser Mini PCI Express HS v2 User s Guide
Kvaser Mini PCI Express HS v2 User s Guide Copyright 2017-2018 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Monday 12 th February, 2018 We believe that the information contained herein was
Kvaser USBcan Light User s Guide
Kvaser USBcan Light User s Guide Copyright 2018 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Wednesday 16 th May, 2018 We believe that the information contained herein was accurate in all respects
hipecs-cio52 CANopen I/O module with 4 analog outputs
General The hipecs-cio52 is a low-cost CANopen module with 4 analog output lines. The I/O are isolated from power supply and the CAN bus sub system. Furthermore, the module has an output resolution of
PCAN-Gateway Quick Start Guide
PCAN-Gateway Quick Start Guide Congratulations...... on your new PCAN-Gateway. This guide covers the basic configuration and operation of the PCAN-Gateway product family. Documentation Detailed documentation
LANGER EMV-TECHNIK. Operating instructions. CAN 100 Optical fibre probe. 1. Use 2
LANGER EMV-TECHNIK Operating instructions CAN 100 Optical fibre probe Contents: Page 1. Use 2 2. Operation 2 2.1. Mechanical connection 2 2.2. Optical connection 3 2.3. Electrical connection 3 2.4. Using
Kvaser PCIEcan HS v2 User s Guide
Kvaser PCIEcan HS v2 User s Guide Copyright 2016-2018 Kvaser AB, Mölndal, Sweden http://www.kvaser.com Printed Monday 12 th February, 2018 We believe that the information contained herein was accurate
Apex-ICE Universal JTAG Emulator Hardware and Software Installation Guide
Apex-ICE Universal JTAG Emulator Hardware and Software Installation Guide a Notice Analog Devices, Inc. reserves the right to make changes to or to discontinue any product or service identified in this