lumentranslator Specification Sheet

Transcription

1 Client Project name Order# Type Qty DESCRIPTION: Part of the Lumentalk system, Lumentranslator is an electronic device that translates input signals from any control source (DMX, 0-10V or TRIAC), converting it into a robust digital signal shared over a power network. FEATURES AND BENEFITS: Physical : Lumentranslator interface for local and remote installation Standard double gang back box included (surface or recessed model) Standard blank double gang cover plate included Performance : Operating temperatures: 0 C to 50 C [32F to 122F] Dry location only Electrical : Line voltage interface for 120 to 277V Integrated power supply card Multiple input dimming signal: 0-10V, DMX, TRIAC for a list of compatible dimmers Strain relief by others Knockouts for 1 2 " NPT hubs TOP VIEW 4 9 " 16 [116mm] 2 3 " 16 [56mm] " [114mm] FRONT VIEW SIDE VIEW 1/6

2 INSTALLATION DETAILS 2 3" 16 [56mm] 2 3" 16 [56mm] TOP VIEW TOP VIEW FRONT VIEW Recessed junction box installation detail FRONT VIEW Remote & surface junction box installation detail 2/6

3 FIXTURE AVAILABILITY TABLE Lumentalk is available for: White Dynamic* Lumenline family Lumenline Pendant, Surface and Recessed 1 1 Lumenbeam family Lumenbeam Small and Medium 2 2 Lumenbeam Large, Grande and XLarge Lumencove family Lumencove Nano Lumencove 2.0, XT and XT Direct View 1 1 Lumenfacade family Lumenfacade 1 1 Lumenfacade Inground Lumenfacade Inground Direct View Lumenfacade Interior and Horizontal 1 1 Lumenfacade Stand Alone and Pendant 1 1 Lumenfacade Remote 3 3 Lumenalpha Clear all models 4 N/A Discreet all models 4 N/A Soft all models 4 N/A Pinhole all models 4 N/A Multi all models 4 N/A Spots Small and Large 4 N/A Available Some exceptions. Please consult factory. * Dynamic includes : RGB, RGBW, RGBA, DWH and DWW where applicable. 1 1 ft. (0.3 m) fixtures are compatible with Lumentalk through Lumentalk Data Bridge. Consult specifi cation sheets for details. 2 Compatible with Lumentalk System using Lumentalk Data Bridge. Consult specifi cation sheets for details. 3 Compatible with Lumentalk System through Control and Power Supply Box and Lumentalk Data Bridge. Consult specifi cation sheets for details. 4 Available for UL (remodel installation type) and CE constructions. Consult specifi cation sheets for possible lumen output and color rendering combinations. 5 Compatible with Lumentalk System through Digital Data Bridge and Lumentalk Data Bridge. Consult specification sheets for details. 3/6

4 TYPICAL WIRING DIAGRAMS Local & remote installation (0-10V Version Shown) *Lumentranslator card must remain accessible at all time. Typical lumenline fixture - lumentalk dimming Lumentranslator 0-10V 0-10V Dimmer ( for a list of compatible dimmers) V Circuit from Electrical Panel Data input from the dimmer (typical #24-2 cable by others) *Maximum distance between dimmer and lumentranslator is 50 [15m]. Junction box Front view Lumentranslator card Back view From dimmer (typical 0-10V dimmer wire colors shown) purple Data+ orange No connection gray Ground To fixtures white Neutral black Line green 120V/277V input American Color Code Wiring detail TRANSLATOR CARD WIRE COLOR WHITE BLACK GRAY ORANGE PURPLE / USE POWER -120/277V POWER +120/277V GROUND NO CONNECTION DATA + * For DMX and TRIAC control protocols please consult the wiring diagrams on page 5. Calibration is required for TRIAC and 0-10V Lumentranslators. Consult installation instructions for more information. Wire colors from different dimmer or controller types may vary. Consult color code wiring detail for connection information. 4/6

5 WIRING DIAGRAMS DMX CONTROLLER Junction box Front view Lumentranslator card Back view From dimmer or controller (typical DMX controller wire colors shown) To fixtures purple orange DMX shield purple Data+ orange Data - gray DMX shield white Neutral black Line green American Color Code Wiring detail TRANSLATOR CARD WIRE COLOR WHITE BLACK GRAY ORANGE PURPLE / USE POWER -120/277V POWER +120/277V DMX SHIELD DATA - DATA + 120V/277V input TRIAC DIMMER Junction box Front view Lumentranslator card Back view From dimmer or controller (typical TRIAC dimmer wire colors shown) To fixtures dimmer left wire dimmer right wire purple Dimmed Hot orange Hot (line) gray No connection white Neutral black Line green American Color Code Wiring detail TRANSLATOR CARD WIRE COLOR WHITE BLACK GRAY ORANGE PURPLE / USE POWER -120/277V POWER +120/277V NO CONNECTION HOT (LINE) DIMMED HOT 120V/277V input * Calibration is required for TRIAC and 0-10V Lumentranslators. Consult installation instructions for more information. Wire colors from different dimmer or controller types may vary. Consult color code wiring detail for connection information. 5/6

6 HOW TO ORDER LTL UL Housing: LTL - Lumentranslator 2 Voltage: volts volts volts volts 3 Input Control signal: V dimming signal DMX - DMX dimming signal TRIAC - TRIAC dimming signal 4 Cover plate finish: WH - White finish BK - Black finish 5 Certification: UL - UL compliant 6/6