Dell Networking OS 9.7 and 6.2

Transcription

1 Dell OS 9.7 and 6.2

2 Dell OS 9.7 S6000, S5000, Z9500, S4810, S4820T, Z9000, IOA/MXL, FN IOA, S6000-ON NETWORK VIRTUALIZATION ENTERPRISE DATA CENTER CUSTOMER FR VRF-lite Enhancements Multicast Routing IPv6 Routing VRF on Z9500 AUTOMATION REST API Extensions Puppet Agent VLT Enhancements Q-in-Q PVST+ S6000 Stacking DCB on Z G to 10G Mode Change without Reboot (S6000, Z9500) Scaling Improvements (T2) FC Flex IOM F Port support Weighted ECMP IPv6 RA Guard DHCPv6 Snooping DHCPv6 Relay DLB on Z9500 PBR w/ Next Hop Tracking Ingress sflow MIB support for per-vlan counters 10GBASE-T module for S5000 OPENFLOW MS NLB Scaling improvement New Optics Qualification Open OpenFlow 1.3 LACP Link fallback - IOA OpenFlow 1.3 on Z9500 ONIE Boot Loader Port 1 Numbering Schema S6000-ON support Federal MXL support for FIPS enabled state 2 Confidential

3 VRF-Lite Enhancement Supports configuration of a single VRF for IPv4 and IPv6 on the same interface Scale Number of VRF 511 Support the following VRF aware IPv6 unicast routing protocols: OSPFv3 BGPv6 IS-IS Support IS-IS for v4 VRF 1 instance per VRF Support IPv4 multicast routing protocols per VRF Support VRRPv3, VRRP IPv6 BFD on non-default VRF Static Route Leaking for IPv6 Dynamic Route Leaking New Platform support Z9500 3

4 S6000 User Port Stacking Unified management with S6000 Features No separate Stacking slot / port Up-to 320Gbps of stacking bandwidth Up-to 6xS6000 in a single stack Support for Daisy Chain and Ring stack topologies Benefits More devices can be managed using a single management IP address High Availability ensures a Standby unit will take over when the Master unit fails BMP support in a stacked environment Not supported on Fan-Out ports 4

5 Table size Scaling Improvement The following scaling numbers are specific to S6000 and Z9500 platforms and are uni-dimensional scaling New UFT (Unified Forwarding Table) Mode 4 support In a stacked environment, the new unit will come up with Master s UFT mode UFT Mode L2 MAC L3 Host table L3 LPM table Forwarding table Profile 2 160K 144K~ 16K Default 3 96K 208K~ 16K Scaled-l3- hosts 4* 32K 16K 128K Scaled-l3- routes (ALPM) ~Tested 128K 5

6 FTOS support on ON platforms NSS NSE FTOS Now supports Open platforms* Open Install Environment support FTOS is ONIE boot compliant Support for New Numbering Schema for Ports, Fans, PS in FTOS 40G port numbering starts from Port 1 Odd port numbers on the top row PS and Fan port numbering are Bay-1 and Bay-2 Platform support S6000-ON, RTS 3/27/2015 *Note: 1. Future platforms include S4000-ON, S3000-ON 6

7 LACP Link fallback MXL/IOA When the LAG is LACP based between IOA and its ToR and if such LACP PDU s are not received by the IOA, connectivity with ToR Switch continues to be established with a single member link (using internal static lag auto-configured) till LACP are seen again, in simple mux Supported* in Standalone and Stacked configuration Benefit Reduce support calls and ensure basic system operation even when LACP is not configured on ToR TOR IO- Aggregator Servers Uplink Lag * VLT config support is in future 7

8 FC Flex IO F Port on MXL LAN FC C ar ets N_Port N_Port F_Port F_Port L in -Port ode Flex IO behaves as FCF FPort switch FCoE server, directly connected FC target: MXL/IOA chassis is directly connected to FC target. FCoE blade server connects to MXL/IOA via back plane of M1000e chassis. All the FC services i.e. Name Server, Zone Server, Login server are provided by the MXL Directly connected FC server, directly connected FC target MXL/IOA chassis is directly connected to FC target and FC server. All the FC services i.e. Name Server, Zone Server, Login server are provided by the MXL E_port is not supported 8

9 Dell 40G-LM4 QSFP+ Optical Module Specification: Dell proprietary in partnership with optical vendor Inter-op with non-dell systems: as long as same optical vendor SKU is plugged into both systems Duplex optical MMF Qualification in progress for duplex SMF operation Uses: 40GE point to point Alternative to Cisco BiDi Reach: 140m OM3 MMF 160m OM4 MMF Up to 2 km on SMF Power: 3.5W per end MSA: QSFP+ Connector: Duplex LC QSFP+ DC network QSFP+ 9

10 Dell PSM4-LR Optical Module Specification: 10GBASE-LR on each lane Parallel optical SMF Uses: 4x10GE breakout to 10G-LR Reach: 10km SMF Power: 3.5W per end MSA: QSFP+ Connector: MPO QSFP+ Accessories MPO to 4xLC SMF breakout cable may be needed DC network SFP+ 10

11 Dell QSA Specification: see below Uses: 1/10GE from QSFP+ port QSA plugs into QSFP+ port, 1G SFP or 10G SFP+ plugs into QSA Only subset of SFP/SFP+ modules to be tested for use in QSA SFP/SFP+ modules supported 1GE SX, LX SFP 10GE LR, ER, ZR SFP+ Reach: Check SFP optic spec. Check SFP+ optic spec. Power : 1.5W MSA: NA Connector: NA Switch QSA 1 x 1GE / 1 x 10GE SFP/SFP+ DC network SFP/SFP+ 11

12 S6000 LR4 and LM4 Port support Ports Ports usable for LR4/LM Due to thermal constraints top row of ports can support high power optics at all temps. 12

13 Dell OS 6.2 N2000, N3000, N4000 NETWORK VIRTUALIZATION VRF-lite Unicast Routing IPv4 OSPF Support Static inter-vrf routing 32 VRF on N3000, 64 VRF on N4000 Enterprise Campus CoA AVB (N4000 only) BGP IPv4, IPv6 Feature Requests Increase MAC table size on N2000, N3000 up to 32K IPv6 RA Guard BFD (not on N2000) Supports up to 4 egress (TX)/ ingress (RX) active mirroring sessions Supports up to 2 both (TX/RX) active mirroring sessions High Availability MLAG Enhancements Single virtual MAC Support additional link for EQL/ ClearPass data traffic 13 Confidential