3DS Max Tutorial Surface, Shell, Editable Mesh and Mesh Smooth.
|
|
- Blake Houston
- 6 years ago
- Views:
Transcription
1 3DS Max Tutorial Surface, Shell, Editable Mesh and Mesh Smooth. This is a tutorial that shows how to use the 3D Studio Max modifiers Surface and Shell and how to work with meshes. To start with you really need to plan out what it is that you want to create. If you are new to this then this can be a quick pencil drawing of what you want to make. There are a few things to bear in mind. 1. If this is symmetrical then we are going to model half of it and copy. 2. Keep it simple to start with and then work from there. In a nutshell we are going to create a model of this spaceship (Fig 1.) by creating interlocking splines, use the surface modifier to cover them, applying the Shell modifier to give it depth then convert to editable mesh and smooth out. Finally give the model a second side by copying it. Fig 1. Yep, it s a mildly pathetic drawing of a medical ship orbiting a planet (imagination is required). Right, let s plan this. We ll make the ship first and then create the planet and so on. Lighting we ll leave until last. The ship is symmetrical so we ll only make half, then copy.
2 There are a few useful functions inside Max that will help us do this. Max has a very useful snap function that will make sure all the points we create are on top of one another. - Snap Icon. Right clicking on this icon brings up the following menu: Make sure only Vertex is checked then close. This will automatically move the next created vertex to the same position as the one you are over (you ll see in a minute, bear with me) so that they are aligned. Alignment is paramount as without alignment you will not have closed polygons. As far as viewports are concerned it depends on whether you are left or right handed. Lefties will have the left viewport, righties the right viewport. The bottom of the top viewport is the front of the model. Good, let s begin. Select Line from the Splines menu:
3 I work with the outline first in the right viewport, but this method is flexible enough to allow you to do as you please. New Lines are naturally editable splines, as a matter of interest. In the right viewport create a shape that looks as follows (when asked if you want to close the shape say yes.):
4 If this is the first time you are working with lines please be prepared to do this a few times. The important thing is that there are equal numbers of vertices on the top line as there are on the bottom line. This is extremely important. The vertices at the front of the model are new attachment points, and this is where we will continue. Make sure the snap icon is on. Go to the modify tab, click on where it says Line which will go yellow: If you scroll down a bit you will find a button that says Create Line, press this. If you hover over the vertices in the front you ll see a larger cross appear in a light blue colour. This is the snap in action. Now we are going to create the contour lines. Create two new lines as follows:
5 Now these contour lines are moved to create the contours. This is best done using a combination of the top and right viewports. At the end you should get something similar to this:
6 The next step is to create the vertical join lines. This will create the individual 3 or 4 sided polygons.
7 In the modifiers menu pick the surface modifier from the list. Apply the modifier. Very important as we are going to use mesh smooth make the Steps in the Patch Topology equal to 0. If you can t see the model then click the Flip Normals tick box. Now you should have something that looks like the picture below. If there are gaps then there are vertices that haven t lined up. Select the two that should be lined up and select the Fuse button.
8 Ok, looks like it s getting there. Half of the model is complete. I will add the nacelles now by extruding individual mesh polygons and manipulating the vertices (bear with me, you ll see). So, first I ll make the model into a mesh. Right click on the model and select Convert To / Convert to Editable Mesh. On the right hand side there should be a few buttons in red, select the one as below: Now select the three most rear polygons on the model: Go down and extrude them, I selected 70 but whatever looks good to you. Your model should now look a little like this:
9 Do not worry that it is a bit jagged, when the modelled engines are added it ll look good. Now go to the modifier list and add a Shell modifier. Make the outer amount 0 and the inner amount 1. Right click on the model again and convert to editable mesh. Saving here is a good plan. Now go to the modifier list and select Mesh Smooth. Set the iterations to 1 and the model should look like this: Right click and convert to editable mesh. You should notice that there are a ton more polygons now! The next thing is to copy. This is a mirror copy, so select the button that looks like: This box will pop up, select as below.
10 With one half selected click on the attach button and select the other half. The model is completed. In its rendered state it looks like: Now, here s the thing. Tutorials are here to inspire so I will allow you to complete the model on your own. Please, if you do complete it, show the results. I will finish this and post my version. Peace folks.
1st Point. 2nd Point. hold shift & drag along Y. Splines
Splines STEP 1: open 3DS Max _ from the Command Panel under the Create tab click on Shapes (note: shapes are really Splines) _ under Object Type click on Ellipse STEP 2: Expand the Keyboard Entry tab type
More informationWalls and Windows. Here is a useful link to explore for later -- AutoCAD drawing tutorials:
Walls and Windows Eventually we will import your CAD drawings and you will need well-constructed files which we will then use extrude, loft, and sweep, etc., in Max. Here is a useful link to explore for
More informationMax scene used to generate the image from the second pdf in this tutorial.
Tutorial covers creating vector drawings from a 3ds max scene and methods for compositing these drawings back into a rendering. Rendering set up is based of the lighting set up from the mental ray/skylight/mr
More informationAutodesk Fusion 360: Model. Overview. Modeling techniques in Fusion 360
Overview Modeling techniques in Fusion 360 Modeling in Fusion 360 is quite a different experience from how you would model in conventional history-based CAD software. Some users have expressed that it
More informationA Guide to Autodesk Maya 2015
A Guide to Autodesk Maya 2015 Written by Mitchell Youngerman Table of Contents Layout of Toolbars...pg 1 Creating Objects...pg 2 Selecting & Deselecting Objects...pg 3 Changing Perspective... pg 4 Transforming
More informationBox Modeling a Character Model Maya 2013
2007-2013 Michael O'Rourke Box Modeling a Character Model Maya 2013 Concept When modeling a polygon character model, it can be faster to create a symmetrical model at first by working on only one half
More informationBrief 3ds max Shaping Tutorial
Brief 3ds max Shaping Tutorial Part1: Power Key Axe Shaft Written by Maestro 1. Creation: Go to top view, create a 6 sided cylinder, 0.1 radius this is the perfect shaft thickness to fit in the hand, so
More informationCreating a Double IK Chain in Lightwave
Creating a Double IK Chain in Lightwave By: Jake Stewart, Stewart864@live.missouristate.edu Introduction: This tutorial is provide some helpful (hopefully) instructions on creating a double IK chain in
More information3ds Max Cottage Step 1. Always start out by setting up units: We re going with this setup as we will round everything off to one inch.
3ds Max Cottage Step 1 Always start out by setting up units: We re going with this setup as we will round everything off to one inch. File/Import the CAD drawing Be sure Files of Type is set to all formats
More informationLesson 1: Creating T- Spline Forms. In Samples section of your Data Panel, browse to: Fusion 101 Training > 03 Sculpt > 03_Sculpting_Introduction.
3.1: Sculpting Sculpting in Fusion 360 allows for the intuitive freeform creation of organic solid bodies and surfaces by leveraging the T- Splines technology. In the Sculpt Workspace, you can rapidly
More informationBonus Ch. 1. Subdivisional Modeling. Understanding Sub-Ds
Bonus Ch. 1 Subdivisional Modeling Throughout this book, you ve used the modo toolset to create various objects. Some objects included the use of subdivisional surfaces, and some did not. But I ve yet
More informationTutorials For 3ds Max
Desk - 3ds Max Modeling Tutorial Tutorials For 3ds Max Tutorials For 3ds Max Desk - 3ds Max Modeling Tutorial Hi everyone. In this 3D modeling tutorial i will show you how to create a Desk using 3d Studio
More informationFull Screen Layout. Main Menu Property-specific Options. Object Tools ( t ) Outliner. Object Properties ( n ) Properties Buttons
Object Tools ( t ) Full Screen Layout Main Menu Property-specific Options Object Properties ( n ) Properties Buttons Outliner 1 Animation Controls The Create and Add Menus 2 The Coordinate and Viewing
More informationPorsche 91 1GT D m o d e ling tutorial - by Nim
orsche 911GT 3D modeling tutorial - by Nimish In this tutorial you will learn to model a car using Spline modeling method. This method is not very much famous as it requires considerable amount of skill
More informationUCL Depthmap 7: Convex Space Analysis
UCL Depthmap 7: Convex Space Analysis Version 7.12.00c Outline This tutorial will cover drawing a convex map, linking the spaces, and then analysing it. New file First, begin a New file, either from the
More informationCharacter Modeling IAT 343 Lab 6. Lanz Singbeil
Character Modeling IAT 343 Lab 6 Modeling Using Reference Sketches Start by creating a character sketch in a T-Pose (arms outstretched) Separate the sketch into 2 images with the same pixel height. Make
More informationCreating a T-Spline using a Reference Image
1 / 17 Goals Learn how to create a T-Spline using a Reference Image. 1. Insert an image into the workspace using Attach Canvas. 2. Use Calibrate to set the proper scale for the reference image. 3. Invoke
More informationEditing Polygons. Adding material/volume: Extrude. Learning objectives
Learning objectives Be able to: use the Extrude tool to add volume to a polygon know what edge loops are and how to insert edge loops in a polygon cut edges in a polygon know multiple methods of sewing
More informationSCENE FILE MANIPULATION SCENE FILE MANIPULATION GETTING STARTED MODELING ANIMATION MATERIALS + MAPPING RENDERING. Saving Files. Save.
SCENE FILE MANIPULATION SCENE FILE MANIPULATION There are several things you can do with a scene file in 3ds Max. You can save a file, save a file temporarily and retrieve it, and combine scene files.
More informationMaya 2014 NURBS Modeling Tutorial Airship
Maya 2014 NURBS Modeling Tutorial Airship Airships have captured human imagination for centuries and are featured prominently in books, film and video games. As an introduction to modeling with NURBS (non
More informationMaya 2014 Introduction to Maya
Maya 2014 Introduction to Maya Maya is an incredibly powerful animation software that can be used to create almost anything you can imagine. The purpose of this document is to help you become familiar
More informationS206E Lecture 5, 5/18/2016, Importing and Tracing Drawing Information
Copyright 2016, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2016 2D information in the form of drawings can be brought into Rhino in two major ways. The first one is to import the actual digital
More informationModeling a Gear Standard Tools, Surface Tools Solid Tool View, Trackball, Show-Hide Snaps Window 1-1
Modeling a Gear This tutorial describes how to create a toothed gear. It combines using wireframe, solid, and surface modeling together to create a part. The model was created in standard units. To begin,
More informationHow to...create a Video VBOX Gauge in Inkscape. So you want to create your own gauge? How about a transparent background for those text elements?
BASIC GAUGE CREATION The Video VBox setup software is capable of using many different image formats for gauge backgrounds, static images, or logos, including Bitmaps, JPEGs, or PNG s. When the software
More informationSelect, Move, Rotate and Scale
Select, Move, Rotate and Scale In this tutorial we will cover the basic tools necessary for navigating, moving, and manipulating objects in 3DS Max. It is less of a how to tutorial and more of a guide
More informationLet s Make a Front Panel using FrontCAD
Let s Make a Front Panel using FrontCAD By Jim Patchell FrontCad is meant to be a simple, easy to use CAD program for creating front panel designs and artwork. It is a free, open source program, with the
More informationCGS 3220 Lecture 17 Subdivision Surfaces
CGS 3220 Lecture 17 Subdivision Surfaces Introduction to Computer Aided Modeling Instructor: Brent Rossen Overview Converting from polygons to subdivision surfaces (sub-d) Modeling with sub-d using polygon
More informationMap-colouring with Polydron
Map-colouring with Polydron The 4 Colour Map Theorem says that you never need more than 4 colours to colour a map so that regions with the same colour don t touch. You have to count the region round the
More informationHow to model a car body in T-Splines
How to model a car body in T-Splines My name is and I ll show you how to model complex cars like the Alfa Romeo 147 gta using the T-Splines Maya plugin and various techniques. This will be useful if you
More informationAutodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies
Autodesk Inventor Design Exercise 2: F1 Team Challenge Car Developed by Tim Varner Synergis Technologies Tim Varner - 2004 The Inventor User Interface Command Panel Lists the commands that are currently
More informationSketchUp Quick Start For Surveyors
SketchUp Quick Start For Surveyors Reason why we are doing this SketchUp allows surveyors to draw buildings very quickly. It allows you to locate them in a plan of the area. It allows you to show the relationship
More informationIntroduction to ANSYS DesignModeler
Lecture 9 Beams and Shells 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Beams & Shells The features in the Concept menu are used to create and modify
More informationCreate a Rubber Duck. This tutorial shows you how to. Create simple surfaces. Rebuild a surface. Edit surface control points. Draw and project curves
Page 1 of 24 Create a Rubber Duck This exercise focuses on the free form, squishy aspect. Unlike the flashlight model, the exact size and placement of the objects is not critical. The overall form is the
More informationSpring 2011 Workshop ESSENTIALS OF 3D MODELING IN RHINOCEROS February 10 th 2011 S.R. Crown Hall Lower Core Computer Lab
[1] Open Rhinoceros. PART 1 INTRODUCTION [4] Click and hold on the Boundary Lines in where they form a crossing and Drag from TOP RIGHT to BOTTOM LEFT to enable only the PERSPECTIVE VIEW. [2] When the
More informationHow to start your Texture Box Project!
How to start your Texture Box Project! Shapes, naming surfaces, and textures. Lightwave 11.5 Part One: Create Your Shape Choose Start, Programs, New Tek, Lightwave and Modelor (the orange one). 1.In one
More informationThis lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space.
3D Modeling with Blender: 01. Blender Basics Overview This lesson introduces Blender, covering the tools and concepts necessary to set up a minimal scene in virtual 3D space. Concepts Covered Blender s
More informationExtrude. Taper. STEP 04: Ctrl +V _ select Copy from the clone window _ name the copy: Slabs Mesh _ click OK
Extrude STEP 01: open the class-08 3ds Max file _ select the ellipse _ command panel / modifier list _ select Extrude _ set the extrusion Amount: 400 _ STEP 02: with the perspective viewport current press
More informationLesson 08 Geometrical Object Types
Lesson 08 Geometrical Object Types Introduction In this lesson, you will learn about different geometrical object types. This lesson is meant to clarify the differences between these object types and introduce
More informationIntroduction to AutoCAD 2012
Introduction to AutoCAD 2012 Alf Yarwood Chapter 13 Exercise 1 1. Open AutoCAD 2012 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso3d.dwt. 3. Make two new
More informationAn Approach to Content Creation for Trainz
An Approach to Content Creation for Trainz Paul Hobbs Part 6 GMax Basics (Updates and sample files available from http://www.44090digitalmodels.de) Page 1 of 18 Version 3 Index Foreward... 3 The Interface...
More informationRigging Half-Life 2 Bones
Rigging Half-Life 2 Bones You have the bone in position with your model but of course the bone is not properly fits with your model size. In order to fix it: Resize or Move your model until its fits the
More informationLearning Rhino 3D. Modelling a fork
> Background images - use PictureFrame command to load top and side images of the fork. Place the top image in the Top viewport and place the side image in the Front viewport. > Scale images - you will
More informationTangents. In this tutorial we are going to take a look at how tangents can affect an animation.
Tangents In this tutorial we are going to take a look at how tangents can affect an animation. One of the 12 Principles of Animation is called Slow In and Slow Out. This refers to the spacing of the in
More informationcreate 2 new grid lines
STEP 1: open your class-01 Project file _ go to Level 1 _ select grid line 1 _ type CO (copy) _ repeat for grid line 3 as shown in image 1 Architectural Column STEP 2: from the Ribbon under the Home tab
More informationGetting Started with Silo
CHAPTER 1 Getting Started with Silo In this chapter, we discuss how to view, select, and manipulate models in Silo. If you are not familiar with Silo or polygon modeling, make sure to read the About Silo
More informationStructural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment. Kent L. Lawrence
ANSYS Workbench Tutorial Structural & Thermal Analysis using the ANSYS Workbench Release 11.0 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
More informationIntroduction to SolidWorks Basics Materials Tech. Wood
Introduction to SolidWorks Basics Materials Tech. Wood Table of Contents Table of Contents... 1 Book End... 2 Introduction... 2 Learning Intentions... 2 Modelling the Base... 3 Modelling the Front... 10
More information1. Open up PRO-DESKTOP from your programmes menu. Then click on the file menu > new> design.
Radio Tutorial Draw your spatula shape by:- 1. Open up PRO-DESKTOP from your programmes menu. Then click on the file menu > new> design. 2. The new design window will now open. Double click on design 1
More informationBy Roland Hess -- Based on the Blender Summer of Code tutorial by Michael Worcester
Mesh Modeling Tutorial By Roland Hess -- Based on the Blender Summer of Code tutorial by Michael Worcester In the previous chapter, you learned how to manipulate objects in Blender. You've seen how to
More informationRhinoceros Car Modeling Tutorial
Rhinoceros Car Modeling Tutorial This tutorial will guide you to car nurbs modeling process using Rhinoceros 3.0. To start a car modeling you will need some car images (or sketches) to get an idea of the
More informationAUTODESK FUSION 360 Designing a RC Car Body
AUTODESK FUSION 360 Designing a RC Car Body Abstract This project explores how to use the sculpting tools available in Autodesk Fusion 360 Ultimate to design the body of a RC car. John Helfen john.helfen@autodesk.com
More informationMODEL AIRCRAFT SIMON REEVES
MOEL IRRFT Let your 3 skills take flight with our in-depth guide to modelling this Sea King helicopter using 3ds max. Follow along yourself with the files on the, and you ll never have to wing it again...
More informationSketchUp. SketchUp. Google SketchUp. Using SketchUp. The Tool Set
Google Google is a 3D Modelling program which specialises in making computer generated representations of real-world objects, especially architectural, mechanical and building components, such as windows,
More informationSolidWorks Intro Part 1b
SolidWorks Intro Part 1b Dave Touretzky and Susan Finger 1. Create a new part We ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select File New Templates IPSpart If the SolidWorks
More informationDigitising a map in arcgis desktop 10.3
Digitising a map in arcgis desktop 10.3 1 CONTENTS 2 Evaluating your map... 2 3 Setting up the base map... 3 4 Georeferencing your map/maps... 3 4.1 Georeferencing tips.... 4 5 Digitising your maps...
More informationDesigning Your Teacher Page. Medora Community School Corporation
Designing Your Teacher Page Medora Community School Corporation Introduction This tutorial will show you the basics of creating and running your teacher page on the Medora Community Schools website. This
More informationSolidworks 2006 Surface-modeling
Solidworks 2006 Surface-modeling (Tutorial 2-Mouse) Surface-modeling Solid-modeling A- 1 Assembly Design Design with a Master Model Surface-modeling Tutorial 2A Import 2D outline drawing into Solidworks2006
More informationYou can also search online templates which can be picked based on background themes or based on content needs. Page eleven will explain more.
Microsoft PowerPoint 2016 Part 1: The Basics Opening PowerPoint Double click on the PowerPoint icon on the desktop. When you first open PowerPoint you will see a list of new presentation themes. You can
More informationCO 2 Shell Car. Body. in the Feature Manager and click Sketch from the context toolbar, Fig. 1. on the Standard Views toolbar.
CO 2 Shell Car Chapter 2 Body A. Save as "BODY". Step 1. If necessary, open your BLANK file. Step 2. Click File Menu > Save As. Step 3. Key-in BODY for the filename and press ENTER. B. FRONT Wheel Shell.
More informationGstarCAD Complete Features Guide
GstarCAD 2017 Complete Features Guide Table of Contents Core Performance Improvement... 3 Block Data Sharing Process... 3 Hatch Boundary Search Improvement... 4 New and Enhanced Functionalities... 5 Table...
More informationMET 107 Drawing Tool (Shapes) Notes Day 3
MET 107 Drawing Tool (Shapes) Notes Day 3 Shapes: (Insert Tab Shapes) Example: Select on the rounded rectangle Then use the mouse to position the upper left corner and produce the size by dragging out
More informationXSI TO SINS: COMMANDS & SHORTCUTS
XSI TO SINS: COMMANDS & SHORTCUTS I. Commonly Used Basic Modeling Commands and Shortcuts in XSI: Section A: The Main Control Panel Select Menu Group/Cluster Selection (See Fig. 1.1 for a quick visual overview)
More informationBoat Hull Solid. (Alt-2). in ribbon bar to fix and close ribbon Fig. 3 Mastercam X7 BOAT HULL SOLID Page 29-1
Mastercam X7 Chapter 29 A. Open Boat Block File. Step 1. Open your BOAT BLOCK file. Boat Hull Solid B. Save As BOAT HULL SOLID Step 1. Click File Menu > Save As. Step 2. Key-in BOAT HULL SOLID for the
More information3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar
3D Studio Max Lesson 1.1: A Basic Overview of 3DSMax's Main Tool Bar Introduction In this tutorial, we'll just be taking a look at parts of the environment of 3D Studio Max version 4.26, and helping you
More informationDV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks
DV20420 AutoCAD Civil 3D Visualization in 3ds Max, Infraworks or Navisworks Paul c.kirkendall MasterGraphics, Inc. Learning Objectives After this class, attendees will be able to import Civil 3D project
More informationLOOSE FITTING CLOTHES
LOOSE FITTING CLOTHES Begin by opening the basic box modeled figure 0-BasicFigure.blend. He s at https://users.soe.ucsc. edu/~yonge/05_homework_resources/. This exercise uses some retopology techniques
More informationCAD Tutorial 23: Exploded View
CAD TUTORIAL 23: Exploded View CAD Tutorial 23: Exploded View Level of Difficulty Time Approximately 30 35 minutes Starter Activity It s a Race!!! Who can build a Cube the quickest: - Pupils out of Card?
More informationTUTORIAL 2. OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs.
TUTORIAL 2 OBJECTIVE: Use SolidWorks/COSMOS to model and analyze a cattle gate bracket that is subjected to a force of 100,000 lbs. GETTING STARTED: 1. Open the SolidWorks program. 2. Open a new part file.
More informationPhotocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
SketchUp Level of Difficulty Time Approximately 15 20 minutes Photocopiable/digital resources may only be copied by the purchasing institution on a single site and for their own use ZigZag Education, 2013
More informationStep 3. Rectangle. Fig. 1. Step 6. For the Placement Point, click the bottom left gray rectangle and click OK, Fig. 2. to fit the drawing on screen.
Chapter 24 BOAT SOLID A. Name Level. Hold down ALT and press Z. Step 2. Key-in block for Name and click OK, Fig. 1. B. Create Rectangle. Step 3. Rectangle. Fig. 1 Step 4. 1 Point. Step 5. Key-in 9 for
More informationStructural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment
ANSYS Workbench Tutorial Structural & Thermal Analysis Using the ANSYS Workbench Release 12.1 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
More informationAncient Cell Phone Tracing an Object and Drawing with Layers
Ancient Cell Phone Tracing an Object and Drawing with Layers 1) Open Corel Draw. Create a blank 8.5 x 11 Document. 2) Go to the Import option and browse to the Graphics 1 > Lessons folder 3) Find the Cell
More informationMAYA; AN INTRODUCTION TO MAYA; EndOfLine.info;
MAYA; AN INTRODUCTION TO MAYA; EndOfLine.info; Maya is an intuitive modelling and animation software that relies on a different set of techniques and strategies than Rhinoceros. It is important to note
More informationReference Image. Source:
Mesh Modeling By Immer Baldos This document is a tutorial on mesh modeling using Blender version 2.49b. The goal is to create a model of an elevator. This tutorial will tackle creating the elevator cart,
More informationRHINO; AN INTRODUCTION + FAKING TRABECULAE; EndOfLine.info;
RHINO; AN INTRODUCTION + FAKING TRABECULAE; EndOfLine.info; Rhinoceros is a relatively simple program with an AUTOCAD based interface. The disadvantage of this type of interface is a series of terms need
More informationBuilding level Rail embankments and correcting heights with XML. (V1.0) (Tangram)
Building level Rail embankments and correcting heights with XML. (V1.0) (Tangram) 1 This tutorial has been created to illustrate a few techniques in providing raised level embankments for railway lines
More informationSolidWorks 2½D Parts
SolidWorks 2½D Parts IDeATe Laser Micro Part 1b Dave Touretzky and Susan Finger 1. Create a new part In this lab, you ll create a CAD model of the 2 ½ D key fob below to make on the laser cutter. Select
More informationNURBS Sailboat on Ocean (Modeling/Animation)
Course: 3D Design Title: NURBS Sailboat Blender: Version 2.6X Level: Beginning Author; Neal Hirsig (nhirsig@tufts.edu) (April 2013) NURBS Sailboat on Ocean (Modeling/Animation) The objective of this PDF
More informationORB Education Quality Teaching Resources
These basic resources aim to keep things simple and avoid HTML and CSS completely, whilst helping familiarise students with what can be a daunting interface. The final websites will not demonstrate best
More informationGGR 375 QGIS Tutorial
GGR 375 QGIS Tutorial With text taken from: Sherman, Gary E. Shuffling Quantum GIS into the Open Source GIS Stack. Free and Open Source Software for Geospatial (FOSS4G) Conference. 2007. Available online
More informationOr select Reset button under the application button (3ds Max symbol top left of screen)
3ds Max Notes 1. Starting 3ds Max file Open 3ds Max If Welcome to 3ds Max menu appears then select New Empty Scene Or select Reset button under the application button (3ds Max symbol top left of screen)
More informationDesigning Simple Buildings
Designing Simple Buildings Contents Introduction 2 1. Pitched-roof Buildings 5 2. Flat-roof Buildings 25 3. Adding Doors and Windows 27 9. Windmill Sequence 45 10. Drawing Round Towers 49 11. Drawing Polygonal
More informationCreate an Adorable Hedgehog with Basic Tools in Inkscape Aaron Nieze on Sep 23rd 2013 with 5 Comments
Create an Adorable Hedgehog with Basic Tools in Inkscape Aaron Nieze on Sep 23rd 2013 with 5 Comments Tutorial Details Software: Inkscape Difficulty: Beginner Completion Time: 2 hours View post on Tuts+
More informationIntroduction to AutoCAD Chapter 15 Exercise 1
Page 1 Introduction to AutoCAD 2010 Alf Yarwood Chapter 15 Exercise 1 1. Open AutoCAD 2010 with a double-click on its shortcut icon in the Windows desktop. 2. Open the template acadiso3d.dwt. 3. Open the
More informationaccordingly. This is managed through our Other content feature.
CONTENTS 1.. Introduction 2. Recap 3. Creating sub sections (parent/child sections) and sub menus 3.1 What are sub sections and sub menus? 3.2 How to set up Parent and child sections 3.3 Adding a Sub menu
More information3 Polygonal Modeling. Getting Started with Maya 103
3 Polygonal Modeling In Maya, modeling refers to the process of creating virtual 3D surfaces for the characters and objects in the Maya scene. Surfaces play an important role in the overall Maya workflow
More informationVERO UK TRAINING MATERIAL
VERO UK TRAINING MATERIAL Draft Analysis VISI Modelling Draft Analysis INTRODUCTION Pre-requisite It is important that before you attempt this VISI-Analysis training example; you must have completed and
More informationCreating a Snowman Scene
Creating a Snowman Scene By: Shane Trautsch Blender 2.72 What you will learn Basic Modeling Particle systems sculpting Materials and Textures Lighting Creating a Snow By now, you have created a snowman.
More informationKey 3D Modeling Terms Beginners Need To Master
Key 3D Modeling Terms Beginners Need To Master Starting your 3D modeling journey is an exciting and rewarding experience. As you begin to learn and practice, there are essential terms you need to know
More informationMesh Modeling Dice Boolean
Course: 3D Design Title: Mesh Modeling Dice - Boolean Dropbox File: Dice.zip Blender: Version 2.41 Level: Beginning Author: Neal Hirsig (nhirsig@tufts.edu) Mesh Modeling Dice Boolean In this tutorial,
More informationPolygon Modeling Basics Chapter 1 - Vertices
Polygon Modeling Basics Chapter 1 - Vertices In this tutorial we will cover the basic tools necessary for Polygon Modeling using the Vertex sub-object selection. It is less of a how to tutorial and more
More informationLathe Modeling Wine Glass
Course: 3D Design Title: Bezier Curve Modeling Column Dropbox File: WineGlass.zip Blender: Version 2.41 Level: Beginning Author: Neal Hirsig (nhirsig@tufts.edu) Lathe Modeling Wine Glass In this tutorial,
More informationDremel Digilab 3D Slicer Software
Dremel Digilab 3D Slicer Software Dremel Digilab 3D Slicer prepares your model for 3D printing. For novices, it makes it easy to get great results. For experts, there are over 200 settings to adjust to
More informationTutorial 4: Texture Mapping Techniques
Tutorial 4: Texture Mapping Techniques Completion time 40 minutes In the previous tutorial we learned how to create materials, and how to assign texture maps to those materials. In this tutorial we will
More informationThe Christmas motives which served as a base for the cookie cutters.
Seasonal 3D Printing 3D Printed Cookie Cutters (Part 2) As described in yesterday s blog post, cookiecaster.com is a neat and free service to create your own cookie cutters within minutes. However, the
More informationFirstly, I would like to thank ProFantasy for hosting this tutorial on the RPGMaps Blog. Thank you!
Firstly, I would like to thank ProFantasy for hosting this tutorial on the RPGMaps Blog. Thank you! Before we start, it is important that you fully understand what a shaded polygon is, and what it does.
More informationThis is the opening view of blender.
This is the opening view of blender. Note that interacting with Blender is a little different from other programs that you may be used to. For example, left clicking won t select objects on the scene,
More informationHow to draw and create shapes
Adobe Flash Professional Guide How to draw and create shapes You can add artwork to your Adobe Flash Professional documents in two ways: You can import images or draw original artwork in Flash by using
More informationTutorial: Making your First Level
Tutorial: Making your First Level This tutorial walks you through the steps to making your first level, including placing objects, modifying the terrain, painting the terrain and placing vegetation. At
More informationLESSON 2 MODELING BASICS
LESSON 2 MODELING BASICS In this lesson we ll start to model a multi-story office building from scratch. We ll construct the base grid, create the two towers and place slabs between the stories. Also we
More information