Keithley Instruments Customer Documentation Series 2600A UL Safety Supplement
|
|
- Sharleen Freeman
- 6 years ago
- Views:
Transcription
1 Keithley Instruments, Inc Aurora Road Cleveland, Ohio KEITHLEY Keithley Instruments Customer Documentation Series 2600A UL Safety Supplement 1. Introduction The Keithley Instruments Series 2600A System SourceMeter instruments offer electronic component and semiconductor device manufacturers a scalable, high throughput, highly cost-effective solution for precision DC, pulse, and low frequency AC source-measure testing. 2. Contact information If you have any questions, please contact your local Keithley Instruments representative or call Keithley Instruments corporate headquarters (toll-free inside the U.S. and Canada only) at KEITHLEY ( ), or from outside the U.S. at For worldwide contact numbers, visit our website at 3. Package content The following items are included with every Series 2600A order: Model 2601A, 2602A, 2611A, 2612A, 2635A, or 2636A System SourceMeter instrument with line cord Two RJ-45 crossover cables Certificate of calibration Quick Start Guide CD-ROMs that contain: PDFs of the User s and Reference Manuals Test Script Builder script development software Accessories as ordered The following items are included with Models 2601A, 2602A, 2611A, and 2612A only: 2600-KIT Screw terminal connector kit (two with Models 2602A and 2612A and one with Models 2601A and 2611A) The following items are included with Models 2611A, 2612A, 2635A, and 2636A only: 2600-IAC interlock connector The following items are included with Models 2635A and 2636A only: CS inverted mini plug wire cutting 2600-ALG-2 low noise triax cable with alligator clips, UL approved for up to 42 V, 2 m (6.6 ft) (two with Model 2636A and one with Model 2635A) SC-73-0, cm (6 in.) 16 AWG ground connect wire 4. Options and accessories GPIB cables, interfaces, and adaptors (connects Series 2600A to the GPIB bus) Models and : Single-shielded GPIB cables. Terminated with one straight connector (non-stacking) and one feed-through connector. Model is 1 m (3.3 ft) long; Model is 2 m (6.6 ft) long. KPCI-488LP: IEEE-488 interface/controller for the PCI Bus. PA-1016 Rev. B / October
2 KPXI-488: IEEE-488 interface board for the PXI Bus. KUSB-488A: USB-to-GPIB interface adapter. Models , , , and : Double-shielded premium GPIB cables. Each end is terminated with a feed-through metal housing for longest life and best performance. Model is 0.5 m (1.6 ft) long; is 1 m (3.3 ft) long; Model is 2 m (6.6 ft) long; Model is 4 m (13 ft) long. Model 7010: Shielded GPIB-to-GPIB bus adapter. Provides additional clearance between the rear panel and GPIB cable connector. Allows easier access to cables and other connectors. RS-232 cable (connects Series 2600A to the RS-232) Model shielded RS-232 cable: This straight-through cable connects the RS-232 of the Series 2600A to the RS-232 interface of your PC. This cable is 1.5 m (5 ft) long and uses shielded cable and connectors to reduce electromagnetic interference (EMI). TSP-Link cable (connects Series 2600A to the TSP-Link or LAN) CA-180-3A CAT 5 cable: Crossover CAT5 LAN cable that connects the TSP-Link of the Series 2600A to other instruments. It can also be used to connect the instrument to LAN equipment with Auto_MDIX or to connect the LAN port of the Series 2600A to a computer. Digital I/O port cables (connects Digital I/O to other devices) CA DB-25 cable: DB-25 male to female DB-25 cable, 1.5 m (5 ft) long, used to connect the digital I/O port to other instruments TLINK trigger cable: Cable used to connect the digital I/O port of Series 2600A instruments to other Keithley Instruments equipped with Trigger Link (TLINK). 5. Electrical rating Table 1: Input supply Models 2601A, 2602A, 2611A, 2612A 100 V AC to 240 V AC, 50/60 Hz, 240 V A Models 2635A, 2636A 100 V AC to 240 V AC, 50/60 Hz, 250 V A Table 2: Source output Models 2601A and 2602A Model 2611A, 2612A, 2635A and 2636A Voltage 40 V DC maximum 200 V DC maximum Current 3A maximum at 6 V DC, 1 A maximum at 40 V DC 1.5 A maximum at 20 V DC, 0.1 A maximum at 200 V DC Table 3: Measuring input Models 2601A and 2602A Measurement Category I Model 2611A, 2612A, 2635A, and 2636A Measurement Category I Voltage 40 V DC maximum Hi to Lo, 250 V DC Lo to Ground 200 V DC maximum Hi to Lo, 250 V DC Lo to Ground Current 3 A maximum at 6 V DC, 1 A maximum at 40 V DC 1.5 A maximum at 20 V DC, 0.1 A maximum at 200 V DC Impedance Variable Variable 2 PA-1016 Rev. B / October 2010
3 6. Assembly, location, and mounting requirements Series 2600A Customer Documentation UL Safety Supplement The Series 2600A System SourceMeter instruments can be mounted in a standard 19-inch rack (horizontal mountings only; mounting vertically may impede the cooling mechanisms). When rack mounting the Series 2600A, make sure there is adequate airflow around at least one side to ensure proper cooling. Adequate airflow enables air temperatures within approximately one inch of the Series 2600A surfaces to remain within specified limits under all operating conditions. The cooling specifications state: Forced air Side intake, rear exhaust One side must be unobstructed when rack mounted 7. Supply connection and grounding requirements Before operating an instrument, ensure that the line cord is connected to a properly grounded, appropriately rated power receptacle. Inspect the connecting cables, test leads, and jumpers for possible wear, cracks, or breaks before each use. When installing equipment where access to the main power cord is restricted, such as rack mounting, a separate main input power disconnect device must be provided in close proximity to the equipment and within easy reach of the operator. 8. Ventilation requirements To prevent damaging heat build-up and ensure specified performance, observe to the following precautions: The rear exhaust vent and at least one side vent must be kept free of any obstructions. Even partial blockage could impair proper cooling. DO NOT position any devices adjacent to the Series 2600A that force air (heated or unheated) into or onto its cooling vents or surfaces. This additional airflow could compromise accuracy performance. When rack mounting the Series 2600A, make sure there is adequate airflow around at least one side to ensure proper cooling. Adequate airflow enables air temperatures within approximately one inch of the Series 2600A surfaces to remain within specified limits under all operating conditions. DO NOT rack-mount high power-dissipation equipment adjacent to the Series 2600A that could cause excessive heating to occur. The specified ambient temperature must be maintained around the surfaces of the Series 2600A to maintain specified accuracies. 9. Environmental conditions To maintain safety, the following environmental conditions should be maintained: For indoor use only Altitude up to 2000 m Temperature 0 C to 40 C (32 F to 104 F) Maximum relative humidity 80 percent for temperatures up to 31 C (88 F), decreasing linearly to 50 percent relative humidity at 40 C (104 F) Mains supply voltage fluctuations not to exceed ±10 percent of the nominal voltage Transient overvoltages according to INSTALLATION CATEGORIES (OVERVOLTAGE CATEGORIES) I, II, and III (see Annex J); for mains supply, the minimum and normal category is category II Pollution degree: 1 or 2 To maintain accuracy the following, additional environmental conditions should be maintained: An ambient temperature of 18 C to 28 C (65 F to 82 F) A relative humidity of less than 70 percent unless otherwise noted The instrument may be operated at up to 50 C (122 F) where the power output is derated by one watt per channel for each degree Celsius above 30 C (86 F), and at up to 70 percent relative humidity. Terminals shall not be used for measurements within the measurement categories CAT II, CAT III, and CAT IV. Input PA-1016 Rev. B / October
4 measurement terminals shall also be protected from drawing more than then maximum rated current when connecting to an external source. 10. Front panel operation The following information is a brief summary of the Series 2600A front-panel operating controls. For more detailed information, refer to the Series 2600A User s and Reference Manuals. NOTE The Models 2601A, 2611A, and 2635A have one source-measure channel (Channel A); Models 2602A, 2612A, and 2636A have two source-measure channels (Channel A and Channel B). Figure 1: Models 2601A, 2611A, 2602A, 2612A, 2635A, and 2636A front panels 1 -Special Keys and power switch (DISPLAY, CONFIG, POWER)* 2 - Source-measure setup, performance control, and special operation. TOP ROW: SRC, MEAS, LIMIT, MODE, number keys MIDDLE ROW: DIGITS, SPEED, REL, FILTER, number keys BOTTOM ROW: LOAD, RUN, STORE, RECALL, TRIG, MENU, EXIT, ENTER, number keys 3 - Up and down RANGE keys, AUTO 4 - OUTPUT ON/OFF, LED indicator 5 - Navigation wheel, USB port, CURSOR keys * For detailed descriptions of front-panel operations for all System SourceMeter models, refer to the Series 2600A User s and Reference Manuals 4 PA-1016 Rev. B / October 2010
5 11. Rear panel overview SMU Connectors Figure 1: SMU connector diagrams for Models 2602A/2612A and 2635A/2636A) 1 - CHANNEL A and CHANNEL B 1 - CHANNEL A and CHANNEL B Triax connectors 2 - DIGITAL I/O 2 - DIGITAL I/O 3 - IEEE IEEE Cooling exhaust vent 4 - Cooling exhaust vent 5 - Chassis ground 5 - Chassis ground 6 - Low noise chassis ground 6 - RS RS TSP-Link 8 - TSP-Link 8 - Power module 9 - Power module 9 - Triax connector 10 - LAN 10 - Phoenix connector on ground module 11 - LAN 12. Technical specifications and features Models 2601A/2602A System SourceMeter instruments: Source ±DC voltage from 1 μv to 40.4 V Source ±DC current from 1pA to 3.03 A Source ±pulse current up to 10 A Measure ± pulse current up to 10 A Measure ±DC voltage from 1 μv to 40.8 V Measure ±DC current from 1 pa to 3.06 A Models 2611A/2612A System SourceMeter instruments: Source ±DC voltage from 1 μv to 202 V Source ±DC current from 1p A to A Source ±pulse current up to 10 A Measure ± pulse current up to 10 A Measure ±DC voltage from 1 μv to 204 V Measure ±DC current from 1 pa to 1.53 A Models 2635A/2636A System SourceMeter instruments: Source +/- DC voltage from 1 μv to 20 2V Source +/- DC current from 20 fa to A Source ±pulse current up to 10 A Measure ± pulse current up to 10 A Measure +/- DC voltage from 1 μv to 204 V PA-1016 Rev. B / October
6 Measure +/- DC current from 1 fa to 1.53 A Resistance and power measurement functions. LXI Class C. High Capacitance mode for load impedance up to 50 μf. Contact check function. Two independent source-measure channels (Models 2602A, 2612A, and 2636A only). Four-quadrant sink or source operation. Embedded Test Script Processor (TSP ) accessible from any host interface; responds to high-speed test scripts comprised of instrument control commands. Linear, logarithmic, and custom sweeping and pulsing. Internally stores five user setup options. Two dedicated reading buffers per SMU that can each store and recall over 140,000 measurements. Additional dynamic reading buffers can be created. Filtering to reduce reading noise. Supports IEEE-488 (GPIB), RS-232, and Ethernet. TSP-Link: Allows TSP-enabled instruments to trigger and communicate with each other. Digital I/O port: Allows the Series 2600A to control other devices. Trigger model supports robust triggering and synchronization schemes at hardware speeds. Advanced TSP features enable parallel script execution across the TSP-Link network. USB flash drive access for saving data buffers, test scripts, and user setups. Web-based characterization tool that provides easy access to data gathering, sweeping, and pulsing features. 6 PA-1016 Rev. B / October 2010
Models 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide
Models 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation.
More informationModel 2657A-LIM-3 LO Interconnect Module
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Model 2657A-LIM-3 LO Interconnect Module User's Guide Description The Model 2657A-LIM-3 LO Interconnect
More informationSeries 370 S SoftwSystem are Qui Switch/Mult ck Start G imeter uide Quick Start Guide
Series ACS 3700A Software System Quick Switch/Multimeter Start Guide Quick Start Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation.
More informationSeries 2600A System SourceMeter
www.keithley.com Series 2600A System SourceMeter Quick Start Guide 2600AS-903-01 Rev. A / September 2008 A G R E A T E R M E A S U R E O F C O N F I D E N C E WARRANTY Keithley Instruments, Inc. warrants
More informationModel 8010 High Power Device Test Fixture Interconnection Reference Guide
Model 8010 High Power Device Test Fixture Interconnection Reference Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation. Although
More informationThis 4200-RM Rack Mount Kit is for installation in 4200-CAB series cabinets only.
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 (440) 248-0400 Fax: (440) 248-6168 www.keithley.com Model 4200-RM Rack Mount Kit Packing List Introduction NOTE This 4200-RM Rack Mount
More informationModel 7705 Control Module
www.keithley.com Model 7705 Control Module User s Guide PA-696 Rev. D / October 2006 A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be
More informationModel 2460-KIT. Screw Terminal Connector Kit. Description / September 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2460-KIT Screw Terminal Connector Kit Description The Model 2460-KIT Screw Terminal Connector Kit
More informationHigh Voltage Power Supplies
Source voltages up to 5kV and 10kV 1µA current measurement resolution Multi-channel programmable DC power supplies Low noise for precision sourcing and sensitive measurements; selectable filters reduce
More informationModel 2600B-PM V Protection Module with 1 A Clamp. Description / April 2015 *PPA * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 2600B-PM-1 200 V Protection Module with 1 A Clamp Description The Model 2600B-PM-1 200 V Protection
More informationSemiconductor Switch Matrix Mainframes Six-slot and Single-slot Versions
Significantly faster commandto-connect speeds than earlier Series 700 mainframes mainframe controls a single 8 12 matrix card 707B mainframe controls up to six 8 12 matrix cards Compatible with the popular
More informationModels 2634B, 2635B, and 2636B System SourceMeter Instruments Quick Start Guide
Models 2634B, 2635B, and 2636B System SourceMeter Instruments Quick Start Guide Safety Introduction Safety precautions The following safety precautions should be observed before using this product and
More informationModel 8020-KHV. Kelvin Keithley Triaxial Connector Card. Description / October 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 8020-KHV Kelvin Keithley Triaxial Connector Card Description The Model 8020-KHV Keithley HV Connector
More informationCVU-200-KIT. 200 V Bias Tee Kit. Description. Parts list / October 2014 *P A* 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com CVU-200-KIT 200 V Bias Tee Kit Description The CVU-200-KIT Bias Tee Kit consists of three 2600-RBT-200
More informationCVU-3K-KIT. 3 kv Bias Tee Kit. Description. Parts list / October 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com CVU-3K-KIT 3 kv Bias Tee Kit Description The CVU-3K-KIT Bias Tee Kit consists of three bias tees for
More informationHigh Density Switch Mainframe and Cards
Cost-effective, high density switch mainframe and cards High density, half-rack switching mainframe, just 2U (3.5 in) high Differential 6 32 matrix card Differential quad 1 40 multiplexer card Analog backplane
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationModel 707B / 708B Switching Matrix Mainframe Specifications Model 707B Six Slots with Fixed Rack Model 708B Single Slot with Fixed Rack
Overview: Capacity: Model 707B / 708B Model 707B 708B Description Six plug-in cards per mainframe Single plug-in card per mainframe Supported Cards Model Description 7072 8x12 Semiconductor Matrix 200V,
More informationModel 8020-STC. Kelvin Standard Triaxial Connector Card. Description / October 2014 *P * 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Model 8020-STC Kelvin Standard Triaxial Connector Card Description The Model 8020-STC Kelvin Standard
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationSeries Watt DC Power Supplies
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.keithley.com Series 2268 850-Watt DC Power Supplies Specifications SPECIFICATION CONDITIONS This document contains
More informationWhat is an SMU Instrument, and How Do You Decide Which One is Right for Your Application?
What is an SMU Instrument, and How Do You Decide Which One is Right for Your Application? Lishan Weng Keithley Instruments, Inc. 1 5/7/2012 2012 Keithley Instruments, Inc. 2012 Keithley Instruments, Inc.
More informationWhat is an SMU Instrument, and How Do You Decide Which One is Right for Your Application? Bona, Oh
What is an SMU Instrument, and How Do You Decide Which One is Right for Your Application? Bona, Oh SMU Instrument Basics SourceMeter SMU Instruments SMUs are precision instruments which are used for sourcing
More informationModel 4200-CVU-PWR. Parts Package. Introduction. PA-977 Rev. C / September 2016 *PPA-977C* 1
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 4200-CVU-PWR Parts Package Introduction The Model 4200-CVU-PWR C-V Power Package for both the
More informationSeries 3700 Screw Terminal Assemblies Installation Instructions
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Series 3700 Screw Terminal Assemblies Installation Instructions Introduction This document contains handling
More informationModel 2380 Rack-Mount Kit
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley Model 2380 Rack-Mount Kit Installation Instructions Introduction The Model 2380 Fixed Rack-Mount
More informationSorensen SG Series kw V A. Programmable Precision High Power DC Power Supply
Sorensen SG Series Programmable Precision High Power DC Power Supply High Power Density: up to 15 kw in 3U, 30 kw in a 6U chassis Wide Voltage Range: 0-10V up to 0-1000V, from 4 to 30 kw Fast Load Transient
More information7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 2 6.
TERMINATIONS LENGTH MODEL DESCRIPTION TYPE FROM TO m ft USE WITH: 236-ILC-3 Safety Interlock Shielded twisted pair 3-pin round 3-pin round 3 10 236, 237, 238, 8007, 8008 237-ALG-2 Low Noise Input Triax
More informationModels 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide
Models 2601B, 2602B, and 2604B System SourceMeter Instruments Quick Start Guide Safety precautions The following safety precautions should be observed before using this product and any associated instrumentation.
More informationModels 707B and 708B Switching Matrix
E C N E D I F N O C F O E R U S A E M R E T A E R G A Models 707B and 708B Switching Matrix User s Manual 707B-900-01 Rev. A / August 2010 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose,
More informationPrecision Measurement, Low Noise, Programmable DC Power Supplies
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com Series 2280S Monitor load currents from 100nA to 6A with high accuracy Measure voltage and current with
More information16-Channel 16-Bit PMC Analog I/O Board
16-Channel 16-Bit PMC Analog I/O Board With 8 Input Channels, 8 Output Channels, and Autocalibration Eight 16-Bit Analog Output Channels with 16-Bit D/A Converter per Channel Eight 16-Bit Analog Input
More informationAn ISO 9001 Company. KLP POWER SUPPLY
QUICK START GUIDE KEPCO An ISO 9001 Company. KLP POWER SUPPLY KLP This guide gives a brief introduction to the KLP Power supply, shows simple load connections, and allows you to verify the power supply
More informationStartup Software Quick Start Guide
Startup Software Quick Start Guide Safety precautions Observe the following safety precautions before using this product and any associated instrumentation. Although some instruments and accessories would
More informationSorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply High Power Density: 600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. Near Linear
More informationKeysight U2751A USB Modular Switch Matrix
Keysight U2751A USB Modular Switch Matrix The Keysight Technologies, Inc. U2751A USB modular switch matrix offers a high quality, low-cost switching solution for automated testing. It has 32 two-wire cross
More informationModel kw Pulse Mode Interactive
Model 2461 1 kw Pulse Mode Interactive SourceMeter Instrument User s Manual 2461-900-01 Rev. A / November 2015 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
More informationModel 8101-PIV Test Fixture User s Guide. Overview. SMU Device holder (near latch) Two Leaded Part Plungers. PIV Device holder (near hinge)
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Model 8101-PIV Test Fixture User s uide Overview WARNIN The procedures contained in this User s uide are
More informationCONTENTS. 1- INTRODUCTION 1.1 Introduction 1.2 General Applications and Benefits 1.3 Identification 2- HARDWARE
1 CONTENTS 1- INTRODUCTION 1.1 Introduction 1.2 General Applications and Benefits 1.3 Identification 2- HARDWARE 3- SOFTWARE DESCRIPTION 3.1 Introduction 3.2 TVS-1000 software 3.3 Software Installation
More informationCMX18 FEATURES A 18-SLOT 3U PXI EXPRESS CHASSIS
83-0062-000 15A D A T A S H E E T CMX18 18-SLOT 3U PXI EXPRESS CHASSIS FEATURES 18-slot PXI Express chassis with 1 system controller slot, 6 peripheral slots, 10 hybrid slots, and 1 timing slot High bandwidth
More information2450 SourceMeter SMU Instrument
Side text Capabilities of analyzers, curve tracers, and I-V systems at a fraction of their cost. Five-inch, high resolution capacitive touchscreen GUI 0.012% basic measure accuracy with 6½-digit resolution
More informationSeries 2200 Multichannel Programmable DC Power Supplies User Manual
www.keithley.com Series 2200 Multichannel Programmable DC Power Supplies User Manual 2220S-900-01 Rev. B / October 2012 A G R E A T E R M E A S U R E O F C O N F I D E N C E Series 2200 Multichannel Programmable
More informationAI130 AIswitch Series 130 Chassis Installation Guide
AI130 AIswitch Series 130 Chassis Installation Guide Part Number QR-130 Rev 3 2007 by Kentrox, Inc. All rights reserved. Copyright 2007 by Kentrox, Inc. All Rights Reserved. The material discussed in this
More informationFeatures. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors. Output Connectors. Overvoltage Protection. Over Temperature Protection
Specifications: Input Voltage ( 3 phase ) No of Phases Input Frequency 208VAC ( 170 ~ 265 ) Code: 3P208 415VAC ( 342 ~ 460 ) Code: 3P400 Wye or Delta, 4 wire 3phase and one protective earth. 47 ~ 63Hz
More informationModel 2440 Service Manual Rev. B / December 2004
www.keithley.com Model 2440 Service Manual 2440-902-01 Rev. B / December 2004 A G R E A T E R M E A S U R E O F C O N F I D E N C E WARRANTY Keithley Instruments, Inc. warrants this product to be free
More informationLVN5200A-R2, rev. 1, Hardware Installation Guide
LVN5200A-R2 LVN5250A-R2 LVN5200A-R2, rev. 1, Hardware Installation Guide Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support
More informationJunos WebApp Secure 5.0 Hardware Guide
Junos WebApp Secure 5.0 Hardware Guide Junos WebApp Secure 5.0 Hardware Guide This document contains a specification for the MWS1000 hardware appliance, as well as instructions for installation into a
More informationFeatures. Conducted Emission. Radiated Emission. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors.
Specifications: Input Voltage ( 1 phase ) ( 3 phase ) No of Phases Input Frequency 230VAC ( 170 ~ 265 ) Code: 1P200 208VAC ( 170 ~ 265 ) Code: 3P208 415VAC ( 342 ~ 460 ) Code: 3P400 1phase or 3phase Wye
More informationFeatures. Conducted. Emission. Line Regulation. Load Regulation. Safety. Cooling. Input Connectors. Overvoltage Protection. Phase Loss.
Features Specifications: High Power Density 3.3KW in 2U 1 phase 240vac input 3 phase input 208VAC / 415VAC options Power Factor Correction Output voltage up to 600V, current up to 400A Built-in RS232 /
More informationSeries 2200 Programmable DC Power Supplies
www.keithley.com Series 2200 Programmable DC Power Supplies Reference Manual 2200S-901-01 Rev. A / November 2011 A G R E A T E R M E A S U R E O F C O N F I D E N C E Series 2200 Programmable DC Power
More information10/100Base-TX Industrial Ethernet Extender
Quick Start Guide This quick start guide describes how to install and use the Ethernet Extender. The Ethernet Extender introduced here provides one channel for Ethernet over existing coaxial cable. Product
More information2460 SourceMeter SMU Instrument
Model 2460 SourceMeter SMU Instrument One tightly coupled instrument that combines capabilities from analyzers, curve tracers, and I-V systems at a fraction of their cost Wide coverage up to 105V, 7A DC/7A
More informationHV-CS kv Edge Mount Triaxial Jack
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 http://www.tek.com/keithley HV-CS-1589 3 kv Edge Mount Triaxial Jack Installation Information Description The Keithley Instruments
More information200 VA bis VA 10 V bis 80 V 2 A bis 320 A. Source-Sink NL
200 VA bis 3.120 VA 10 V bis 80 V 2 A bis 320 A NL AC, NL Series Interface overview RS-232 X USB X GPIB O LAN O System bus O Analog X Analog isolated O X Standard O Option / not available NL1V20C40 2-quadrant
More informationSorensen DLM 600 Series W V 2 75 A. Half Rack Programmable DC Power Supply
Sorensen DLM 600 Series Half Rack Programmable DC Power Supply high, half rack (8.5 inches) wide; no top or bottom clearance spacing required. rms, noise as low as 15mV p-p. 0-5kΩ. 375 600 W 5 300 V 2
More informationInstalling the Cisco AS5400XM Universal Gateway
CHAPTER 3 Installing the Cisco AS5400XM Universal Gateway This chapter guides you through the installation of the Cisco AS5400XM universal gateway and includes the following sections: Setting Up the Chassis,
More information2260B-RMK-Series Rack Mount Kit
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY http://www.keithley.com Assembly and Mounting Instructions Introduction The 2260B-RMK-Series Rack Mount Kit is suited for
More informationInstallation Job Aid for Ethernet Routing Switch 3600 Series
Installation Job Aid for Ethernet Routing Switch 3600 Series Notices NN47213-303 Issue 03.01 November 2017 Notice paragraphs alert you about issues that require your attention. Following are descriptions
More informationABL1REM24025 regulated SMPS - single phase V input - 24 V output - 60 W
Characteristics regulated SMPS - single phase - 100..240 V input - 24 V output - 60 W Main Range of product Product or component type Power supply type Rated power in W Input voltage Output voltage Power
More informationPrecision measurement, low noise, programmable DC power supplies
Monitor load currents from 100nA to 6A with high accuracy Measure voltage and current with 6½-digit resolution Capture dynamic load currents as short as 140µs Output up to 192W of low noise, linear regulated
More informationModel DMX24DIM Installation and Operations Manual
DOUG FLEENOR DESIGN, Inc. Model DMX24DIM Installation and Operations Manual Doug Fleenor Design, Inc. 396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 Voice and FAX Manual revision November
More informationInstallation and Maintenance
CHAPTER 4 Installation and Maintenance Revised: April 19, 2010, Introduction This chapter explains how to install a SCE 1000 platform in a rack or in a general tabletop or workbench installation. Additionally,
More informationTN-5308 Quick Installation Guide
TN-5308 Quick Installation Guide Moxa ToughNet Switch Edition 6.0, February 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777
More informationModel 6485 Picoammeter Model 6487 Picoammeter/Voltage Source
www.keithley.com Model 6485 Picoammeter Model 6487 Picoammeter/Voltage Source User s Manual 6487-900-01 Rev. C / March 2011 A G R E A T E R M E A S U R E O F C O N F I D E N C E Model 6485 Picoammeter
More informationAlternative B Type Mid-Span Power Sourcing Equipment. User s Guide
Alternative B Type Mid-Span Power Sourcing Equipment User s Guide REGULATORY STATEMENTS FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device,
More informationATS22D88S6U. ATS22D88S6U soft starter-ats22-control110v-power 208V(25hp)/230V(30hp)/460V(60hp)/575V(75hp) Product data sheet Characteristics.
Characteristics soft starter-ats22-control110v-power 208V(25hp)/230V(30hp)/460V(60hp)/575V(75hp) Main Range of product Altistart 22 Product or component type Product destination Product specific application
More informationR1M-GH BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PC RECORDER MODEL. (thermocouple or DC input, 16 points)
INSTRUCTION MANUAL PC RECORDER (thermocouple or DC input, points) MODEL BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below. If
More informationPanelView Plus/VersaView CE Terminals and Display Modules
Installation Instructions PanelView Plus/VersaView CE Terminals and Display Modules (Catalog Numbers 2711P-xxxxxx, 6182H-xxxxxx) English Inside: Overview...2 For More Information...2 Modular Components...3
More informationInstallation Job Aid for VSP 4850GTS
Installation Job Aid for VSP 4850GTS Notices Release 6.1.0.0 NN46251-308 Issue 02.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs describe
More informationE-Series Site Preparation Guide
E-Series Site Preparation Guide September 2017 215-11797_A0 doccomments@netapp.com Table of Contents 3 Contents Deciding whether to use this guide... 10 Specifications of the model 3040 40U cabinet...
More informationATS22C11S6U soft starter-ats22-control110vpower208v(30hp)/230v(40hp)/460v(75hp)/575v(100h
Characteristics soft starter-ats22-control110vpower208v(30hp)/230v(40hp)/460v(75hp)/575v(100h Complementary Assembly style Function available Power supply voltage limits Main Range of product Altistart
More informationiconverter 2-Module Power Chassis
iconverter 2-Module Power Chassis User Manual 38 Tesla, Irvine, CA 92618 USA Phone: (949) 250-6510; Fax: (949) 250-6514 Page 1 Warning The operating description in this Instruction Manual is for use by
More informationSAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION. NI CompactDAQ Four-Slot Controller with Quad-Core Processor
SAFETY, ENVIRONMENTAL, AND REGULATORY INFORMATION NI cdaq -9136 NI CompactDAQ Four-Slot Controller with Quad-Core Processor This document includes compliance precautions and connection information for
More informationOverview: Functional Description:
CPCI-ADADIO 12-Channel 16-Bit Analog I/O CPCI Card With 8 Simultaneous Input Channels at 200K Samples per Second per Channel, 4 Output Channels, and Byte-Wide Digital I/O Port Features Include: 8 Analog
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS MX100T & MX100TP Triple output dc power supplies - 315 watts Three full performance outputs of equal power Multiple-ranges, up to 70V and up to 6A Ultra-compact size for
More informationAIM & THURLBY THANDAR INSTRUMENTS
AIM & THURLBY THANDAR INSTRUMENTS MX100T & MX100TP Triple output dc power supplies - 315 watts Three full performance outputs of equal power Multiple-ranges, up to 70V and up to 6A Ultra-compact size for
More informationKPXI 3U Instrument Chassis
www.keithley.com KPXI 3U Instrument Chassis User s Manual KPXI-SYS-900-01 Rev. A / January 2007 A G R E A T E R M E A S U R E O F C O N F I D E N C E WARRANTY Keithley Instruments, Inc. warrants this product
More information4170 POS System Installation Guide
4170 POS System 4170 Installation Guide Thank you for selecting UTC RETAIL s innovative Model 4170 Point of Sale solution! This Installation Guide will help you efficiently install the 4170 POS. The document
More informationPrecision measurement, low noise, programmable DC power supplies
Now with enhanced data logging Measure small load currents with 0.05% accuracy and 10nA resolution Measure voltage and current with 6½-digit resolution Capture the peak of a load current burst as short
More informationIEEE-488. included No. Yes, 1 per IEEE-488. included. channel. Yes, 1 per IEEE-488. included. channel IEEE-488. included. channel IEEE-488.
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Section 5 8/6/04 4:36 PM Page 5-8 Table 5-2: High Speed Power Supplies Model 2302 2303 2303-PJ 2304A 2306 2306-PJ 2306-VS
More informationHCS-3600 / 3602 / 3604 Laboratory Grade & High RFI Immunity Switching Mode Power Supply with Rotary Encoder Control
HCS-3600 / 3602 / 3604 Laboratory Grade & High RFI Immunity Switching Mode Power Supply with Rotary Encoder Control 1. INTRODUCTION User Manual This family of efficient, upgraded SMPS with small form factor,
More informationSwitching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply
Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved
More informationInstallation Job Aid for VSP 4450GTX-HT- PWR+
Installation Job Aid for VSP 4450GTX-HT- PWR+ Notices Release 6.1.0.0 NN46251-305 Issue 02.01 November 2017 Notice paragraphs alert you about issues that require your attention. The following paragraphs
More informationClick Desktop Kit. Click Desktop Kit
Click Desktop Kit Click Desktop Kit The Click Desktop Kit is a desktop-mounted set that gives you the building blocks necessary to work with your Click modules at your computer, whether you re testing
More informationMediant 800 Gateway and E-SBC
Mediant 800 Gateway and E-SBC Quick Setup Guide Welcome Congratulations on purchasing your AudioCodes Mediant 800 Gateway and Enterprise Session Border Controller (E-SBC), hereafter, referred to as the
More informationATS22D62Q soft starter-ats22-control 220V-power 230V(15kW)/ V(30kW)
Characteristics soft starter-ats22-control 220V-power 230V(15kW)/400...440V(30kW) Main Range of product Altistart 22 Product or component type Product destination Product specific application Component
More informationClearCube F6151 Media Converter Chassis System with 10/100BaseTX to 100BaseFX Converter
ClearCube FO-065-1200 series 12-Port Media Converter ClearCube F6151 Media Converter Chassis System with 10/100BaseTX to 100BaseFX Converter User s Manual 1 ClearCube Connectivity Systems F6151 Media Converter
More informationModel 7701 Multiplexer Module
Keithley Instruments 28775 Aurora Road Cleveland, Ohio 44139 1-800-935-5595 tek.com/keithley Model 7701 Multiplexer Module Instructions for use with DAQ6510 Introduction The 7701 32-Channel High-Speed
More informationR1M-GH BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL PC RECORDER MODEL. (thermocouple or DC input, 16 points)
INSTRUCTION MANUAL PC RECORDER (thermocouple or DC input, points) MODEL RM-GH BEFORE USE... Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
More informationInstallation Manual. Mounting Instructions Mechanical Mounting. Luminato. Teleste Corporation
Luminato Installation Manual Teleste Corporation Mounting Instructions Mechanical Mounting Luminato Mechanical Installation, agile_59300316, rev0044 Introduction 1 Contents Introduction 4 General... 4
More informationModel 3724 Dual 1x30 FET Multiplexer Card
Keithley Instruments, Inc. 28775 Aurora Road Cleveland, Ohio 44139 1-888-KEITHLEY www.keithley.com Model 3724 Dual 1x30 FET Multiplexer Card Connection Instructions Introduction This instruction sheet
More informationATS22D75S6 soft starter-ats22-control 220V-power 230V(18.5kW)/ V(37kW)/500V(45kW)
Characteristics soft starter-ats22-control 220V-power 230V(18.5kW)/400...440V(37kW)/500V(45kW) Price* : 683.00 GBP Main Range of product Altistart 22 Product or component type Product destination Product
More informationPACSystems RX7i IC698CHS009/119
January 2010 The RX7i rack can be used for all RX7i CPU and I/O configurations, Series 90-70 I/O, and VME modules. Backplane connectors are spaced on 0.8" (20.3mm) centers to accommodate single-width RX7i
More informationBOP QUICK START GUIDE 100W, 200W, 400W. KEPCO An ISO 9001 Company. BIPOLAR OPERATIONAL POWER SUPPLY I INTRODUCTION
QUICK START GUIDE I INTRODUCTION KEPCO An ISO 9001 Company. BIPOLAR OPERATIONAL POWER SUPPLY 1.1. SCOPE OF MANUAL. This Quick Start Guide covers simple installation and local operation of the Kepco 100W,
More information32-CHANNEL 16-BIT TRANSDUCER INPUT PMC
16AICS32 32-CHANNEL 16-BIT TRANSDUCER INPUT PMC With Scanning Input Current Source Available in PMC, PCI, cpci and PC104-Plus and PCI Express form factors as: PMC-16AICS32: PCI-1616AICS32: cpci-16aics32:
More information3190 Series Touch Screen POS Workstation
3190 Series Touch Screen POS Workstation INSTALLATION GUIDE Congratulations on your purchase of UTC RETAIL s innovative 3190 Series Touch Screen POS Workstation. The 3190 Series is designed for use in
More informationGround Master Monitor Installation, Operation and Maintenance
USER GUIDE TB-9078 Ground Master Monitor Installation, Operation and Maintenance Made in the United States of America The Ground Master Monitor and its accessories are available as the following item numbers:
More informationPreparing to Install the VG248
CHAPTER 2 To ensure normal system operation, plan your site configuration and prepare your site before installation. Before installing the VG248, review these sections: Preparing the Installation Site,
More information16AIO Bit Analog Input/Output Board. With 16 Input Channels and 8 Output Channels
16AIO168 16-Bit Analog Input/Output Board With 16 Input Channels and 8 Output Channels Available in PMC, PCI, cpci, PCI-104 and PC104-Plus and PCI Express form factors as: PMC-16AIO168: PMC, Single-width
More informationSLI 15 Inverter Series Data Sheet 1500 Watt, 1U Compact Inverters
Applications Telecom IT Industrial Safety in compliance with IEC60950:1999, 3 rd edition; EN60950:2000; UL60950, 3 rd edition; CSA Standard C22.2 No.60950-00, 3 rd edition Features New, compact design:
More information