Course in ANSYS. Example0154. ANSYS Computational Mechanics, AAU, Esbjerg
|
|
- Annabel Claribel Thomas
- 6 years ago
- Views:
Transcription
1 Course in Example0154
2 Example Frame 2D E = N/mm 2 n = 0.3 L= 1000mm H = 1000mm a = 20mm b = 50mm c = 400mm F = 10000N I = N/mm 4 Example0154 2
3 Example Frame 2D Objective: Compute the maximum deflection and the member forces Tasks: Display the deflection figure? Display member forces? Topics: Start of analysis, Element type, Real constants, Material, modeling, element size for beam models, saving/restoring Example0154 3
4 Example - title Utility Menu > File > Change Jobname /jobname, Example0154 GUI Command line entry Enter: Example0154 Utility Menu > File > Change Title /title, Frame 2D Enter: Frame 2D Example0154 4
5 Example - Keypoints Preprocessor > Modeling > Create > Keypoints > In Active CS Enter 0,0,0 Enter 0,1000,0 Enter 300,1000,0 Enter 1000,1000,0 Enter 1000,0,0 Example0154 5
6 Example - Numbering Utility Menu > PlotCtrls > Numbering Switch on Keypoint numbers Press OK Example0154 6
7 Example - Lines Preprocessor > Modeling > Create > Lines > Lines > Straight Line Select KP1 and KP2 Select KP2 and KP3 Select KP3 and KP4 Select KP4 and KP5 HINT: By clicking with the righthand mouse button you shift between the Pick/Unpick function. This is indicated by the direction of the cursor arrow: Pick: upward arrow Unpick: downward arrow Press OK or Cancel to finish selection Example0154 7
8 Example Modeling Example0154 8
9 Example Element Type Preprocessor > Element Type > Add/Edit/Delete Press Add Example0154 9
10 Example - Element Type Preprocessor > Element Type > Add/Edit/Delete Press Options Press Help to learn more about the element. Find the table on the nex page Example
11 Example - Element Type Notice the key option number for later use Remember MFORX, SMISC,1,7 Press Help to launch the documentation for this element type. Example
12 Example Real Constants Preprocessor > Real Constants > Add Place the cursor on the relevant element and press OK Example
13 Example - Real Constants Preprocessor > Real Constants > Add Enter 1000 Enter Enter 50 Press OK Press Close to finish Example
14 Example - Material Properties Preprocessor > Material Props > Material Models Double Click to step in the material tree Example
15 Example - Material Properties Preprocessor > Material Props > Material Models Enter Modulus of elasticity Enter 0.3 Poisson s ratio Click here to Close Press OK Example
16 Example Mesh Attributes Preprocessor > Meshing > Mesh Attributes > Picked Lines Select All Lines Press OK Press OK Example
17 Example Mesh size Preprocessor > Meshing > Size Cntrls > ManualSize > Lines > Picked Lines Enter 5 Select Pick All Press OK Example
18 Example - Meshing Preprocessor > Meshing > Mesh > Lines Select individual lines to be meshed by Picking NB: It is often necessary to Clear the model for example if Element Type is to be changed Select all lines defined to be meshed Example
19 Example Analysis Type Solution > Analysis Type > New Analysis Select Static Press OK Example
20 Example Define Loads Solution > Define Loads > Apply > Structural > Displacement > On Keypoints Select keypoint KP1 and KP5 Select UX and UY Notice number Press OK Example
21 Example Define Loads Solution > Define Loads > Apply > Structural > Force/Moment > On Keypoints Select keypoint KP3 Notice number Change to FY Press OK to finish Enter Example
22 Example - Save Display of Analysis model Save the model Example
23 Example Write DB log file File > Write DB log file Enter example0154.lgw Example
24 Example Solve LS Solution > Solve > Current LS Press OK Example
25 Example - Solution Status Press Close Press here to Close Example
26 Example - PostProcessing General Postproc > Plot Results > Deformed Shape Select Def+undeformed and Press OK Example
27 Example - PostProcessing Read Maximum displacement: DMX Example
28 Example Element Table Press Add to add the first data line Example
29 Example Element Table Scroll down in this menu to find the line By sequence number Example
30 Example Element Table Press OK Enter 1 as found in table 3.2 From table 3.2 MFORX, SMISC,1,7 Example
31 Example Element Table Press Add to add the second data line Example
32 Example Element Table Press OK Enter 7 as found in table 3.2 From table 3.2 MFORX, SMISC,1,7 Example
33 Example Element Table Press Close Example
34 Example Plot Line-Element Press OK Change to SMIS7 Example
35 Example Plot Line-Element Example
36 Example Clear & Start New You can include commands to be executed when the program starts up in the start71.ans file. Clears (zeros out) the database stored in memory. Clearing the database has the same effect as leaving and reentering the program, but does not require you to exit. Example
37 Example Comments/Questions The example0154.lgw can be edited in Notepad Change the position of force? Display the moment curves? Will the number of elements affect the solution? Example
Course in ANSYS. Example0152. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0152 Example Truss 2D E = 210e09N/m 2 n = 0.3 L1 = L2 = L3 = 3.6m H = 3.118m a = b = 0.050mm F1 = 280kN F2 = 210kN F3 = 280kN F4 = 360kN Example0152 2 Example Truss 2D Objective: Compute
More informationCourse in ANSYS. Example Truss 2D. Example0150
Course in ANSYS Example0150 Example Truss 2D Objective: Compute the maximum deflection Tasks: Display the deflection figure? Topics: Topics: Start of analysis, Element type, Real constants, Material, modeling,
More informationExample Cantilever beam
Course in ANSYS Example0300 Example Cantilever beam Objective: Compute the maximum deflection and locate point of maximum deflection Tasks: How should this be modelled? Compare results with results obtained
More informationCourse in ANSYS. Example0410. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0410 Example Frame 2D Objective: Compute the harmonic response Tasks: Perform a modal analysis Display the mode shapes Perform a harmonic analysis Topics: Topics: Start of analysis, Element
More informationCourse in ANSYS. Example0601. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0601 Example Turbine Blade Example0601 2 Example Turbine Blade Objective: Solve for the temperature distribution within the 6mm thick turbine blade, with 2mm x 6mm rectangular cooling
More informationCourse in ANSYS. Example0153. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0153 Example Offshore structure F Objective: Display the deflection figure and von Mises stress distribution Tasks: Import geometry from IGES. Display the deflection figure? Display the
More informationCourse in ANSYS. Example0504. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0504 Example Cantilever beam Objective: Compute the buckling load Tasks: Display the deflection figure? Topics: Topics: Start of analysis, Element type, Real constants, Material, modeling,
More informationCourse in ANSYS. Example0505. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0505 Example Plate Objective: Compute the buckling load Tasks: How should this be modelled? Compare results with results obtained from norm calculations? Topics: Element type, Real constants,
More informationCourse in ANSYS. Example0500. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0500 Example Column beam Objective: Compute the critical buckling load and display the mode shape Tasks: Create a table and compare results with results obtained from buckling theory?
More informationCourse in ANSYS. Example0303. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0303 Example Gear axle 3D Objective: Compute the maximum stress von Mise Tasks: How should this be modeled? Topics: Element type, Real constants, modeling, Plot results, output graphics,
More informationExample Plate with a hole
Course in ANSYS Example Plate with a hole A Objective: Determine the maximum stress in the x-direction for point A and display the deformation figure Tasks: Create a submodel to increase the accuracy of
More informationStructural static analysis - Analyzing 2D frame
Structural static analysis - Analyzing 2D frame In this tutorial we will analyze 2D frame (see Fig.1) consisting of 2D beams with respect to resistance to two different kinds of loads: (a) the downward
More informationStructural static analysis - Analyzing 2D frame
Structural static analysis - Analyzing 2D frame In this tutorial we will analyze 2D frame (see Fig.1) consisting of 2D beams with respect to resistance to two different kinds of loads: (a) the downward
More informationTwo Dimensional Truss
Two Dimensional Truss Introduction This tutorial was created using ANSYS 7.0 to solve a simple 2D Truss problem. This is the first of four introductory ANSYS tutorials. Problem Description Determine the
More informationStatically Indeterminate Beam
Problem: Using Castigliano's Theorem, determine the deflection at point A. Neglect the weight of the beam. W 1 N/m B 5 cm H 1 cm 1.35 m Overview Anticipated time to complete this tutorial: 45 minutes Tutorial
More informationNonLinear Analysis of a Cantilever Beam
NonLinear Analysis of a Cantilever Beam Introduction This tutorial was created using ANSYS 7.0 The purpose of this tutorial is to outline the steps required to do a simple nonlinear analysis of the beam
More informationLatch Spring. Problem:
Problem: Shown in the figure is a 12-gauge (0.1094 in) by 3/4 in latching spring which supports a load of F = 3 lb. The inside radius of the bend is 1/8 in. Estimate the stresses at the inner and outer
More informationExercise 1. 3-Point Bending Using the GUI and the Bottom-up-Method
Exercise 1 3-Point Bending Using the GUI and the Bottom-up-Method Contents Learn how to... 1 Given... 2 Questions... 2 Taking advantage of symmetries... 2 A. Preprocessor (Setting up the Model)... 3 A.1
More informationAnsys Lab Frame Analysis
Ansys Lab Frame Analysis Analyze the highway overpass frame shown in Figure. The main horizontal beam is W24x162 (area = 47.7 in 2, moment of inertia = 5170 in 4, height = 25 in). The inclined members
More informationNonLinear Materials AH-ALBERTA Web:
NonLinear Materials Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to describe how to include material nonlinearities in an ANSYS model. For instance, the case
More informationStructural modal analysis - 2D frame
Structural modal analysis - 2D frame Determine the first six vibration characteristics, namely natural frequencies and mode shapes, of a structure depicted in Fig. 1, when Young s modulus= 27e9Pa, Poisson
More informationBell Crank. Problem: Joseph Shigley and Charles Mischke. Mechanical Engineering Design 5th ed (New York: McGraw Hill, May 2002) page 87.
Problem: A cast-iron bell-crank lever, depicted in the figure below is acted upon by forces F 1 of 250 lb and F 2 of 333 lb. The section A-A at the central pivot has a curved inner surface with a radius
More informationStructural modal analysis - 2D frame
Structural modal analysis - 2D frame Determine the first six vibration characteristics, namely natural frequencies and mode shapes, of a structure depicted in Fig. 1, when Young s modulus= 27e9Pa, Poisson
More informationCoupled Structural/Thermal Analysis
Coupled Structural/Thermal Analysis Introduction This tutorial was completed using ANSYS 7.0 The purpose of this tutorial is to outline a simple coupled thermal/structural analysis. A steel link, with
More informationInstitute of Mechatronics and Information Systems
EXERCISE 2 Free vibrations of a beam arget Getting familiar with the fundamental issues of free vibrations analysis of elastic medium, with the use of a finite element computation system ANSYS. Program
More information6. Results Combination in Hexagonal Shell
6. Results Combination in Hexagonal Shell Applicable CivilFEM Product: All CivilFEM Products Level of Difficulty: Moderate Interactive Time Required: 0 minutes Discipline: Load combinations results Analysis
More informationLecture # 5 Modal or Dynamic Analysis of an Airplane Wing
Lecture # 5 Modal or Dynamic Analysis of an Airplane Wing Problem Description This is a simple modal analysis of a wing of a model airplane. The wing is of uniform configuration along its length and its
More informationModule 3: Buckling of 1D Simply Supported Beam
Module : Buckling of 1D Simply Supported Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Solution
More informationChapter 2. Structural Tutorial
Chapter 2. Structural Tutorial Tutorials> Chapter 2. Structural Tutorial Static Analysis of a Corner Bracket Problem Specification Problem Description Build Geometry Define Materials Generate Mesh Apply
More informationfile://c:\documents and Settings\sala\Configuración local\temp\~hha54f.htm
Página 1 de 26 Tutorials Chapter 2. Structural Tutorial 2.1. Static Analysis of a Corner Bracket 2.1.1. Problem Specification Applicable ANSYS Products: Level of Difficulty: Interactive Time Required:
More informationBuckling of Euler Column
Problem: An Euler column with one end fixed and one end free is to be made of an aluminum alloy (E = 71 GPa). The cross sectional area of the column is 600 mm and the column is.5 m long. Determine the
More informationANSYS. Geometry. Material Properties. E=2.8E7 psi v=0.3. ansys.fem.ir Written By:Mehdi Heydarzadeh Page 1
Attention: This tutorial is outdated, you will be redirected automatically to the new site. If you are not redirected, click this link to the confluence site. Problem Specification Geometry Material Properties
More informationANSYS Tutorials. Table of Contents. Grady Lemoine
ANSYS Tutorials Grady Lemoine Table of Contents Example 1: 2-D Static Stress Analysis in ANSYS...2 Example 2: 3-D Static Stress Analysis...5 Example 3: 2-D Frame With Multiple Materials and Element Types...10
More informationModule 1.5: Moment Loading of a 2D Cantilever Beam
Module 1.5: Moment Loading of a D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Loads
More informationModule 1.2: Moment of a 1D Cantilever Beam
Module 1.: Moment of a 1D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry Preprocessor 6 Element Type 6 Real Constants and Material Properties 7 Meshing 9 Loads 10 Solution
More informationModule 1.7: Point Loading of a 3D Cantilever Beam
Module 1.7: Point Loading of a D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 6 Element Type 6 Material Properties 7 Meshing 8 Loads 9 Solution 15 General
More informationModelling and Analysis Lab (FEA)
Channabasaveshwara Institute of Technology (Affiliated to VTU, Belagavi & Approved by AICTE, New Delhi) (NAAC Accredited & ISO 9001:2015 Certified Institution) NH 206 (B.H. Road), Gubbi, Tumakuru 572 216.
More informationANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis
R50 ANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis Example 1 Static Analysis of a Bracket 1. Problem Description: The objective of the problem is to demonstrate the basic ANSYS procedures
More informationInstitute of Mechatronics and Information Systems
EXERCISE 4 Free vibrations of an electrical machine model Target Getting familiar with the fundamental issues of free vibrations analysis of a simplified model of an electrical machine, with the use of
More information3. Check by Eurocode 3 a Steel Truss
TF 3. Check by Eurocode 3 a Steel Truss Applicable CivilFEM Product: All CivilFEM Products Level of Difficulty: Moderate Interactive Time Required: 40 minutes Discipline: Structural Steel Analysis Type:
More informationModule 1.6: Distributed Loading of a 2D Cantilever Beam
Module 1.6: Distributed Loading of a 2D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing
More informationRelease 10. Kent L. Lawrence. Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
ANSYS Release 10 Tutorial Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationANSYS Tutorial Release 11.0
ANSYS Tutorial Release 11.0 Structural & Thermal Analysis Using the ANSYS Release 11.0 Environment Kent L. Lawrence Mechanical and Aerospace Engineering University of Texas at Arlington SDC PUBLICATIONS
More informationTransient Thermal Conduction Example
Transient Thermal Conduction Example Introduction This tutorial was created using ANSYS 7.0 to solve a simple transient conduction problem. Special thanks to Jesse Arnold for the analytical solution shown
More informationFINITE ELEMENT ANALYSIS OF A PLANAR TRUSS
Problem Description: FINITE ELEMENT ANALYSIS OF A PLANAR TRUSS Instructor: Professor James Sherwood Revised: Dimitri Soteropoulos Programs Utilized: Abaqus/CAE 6.11-2 This tutorial explains how to build
More informationLAB MANUAL. Dharmapuri ME6711-SIMULATION AND ANALYSIS. Regulation : Branch : B.E. Mechanical Engineering
Dharmapuri 636 703 LAB MANUAL Regulation : Branch : 2013 B.E. Mechanical Engineering Year & Semester : IV Year / VII Semester ME6711-SIMULATION AND ANALYSIS Varuvan Vadivelan Institute of Technology, Dharmapuri
More informationMelting Using Element Death
Melting Using Element Death Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to outline the steps required to use element death to model melting of a material. Element
More informationGeometric Linear Analysis of a Cantilever Beam
WORKSHOP PROBLEM 2a Geometric Linear Analysis of a Cantilever Beam Objectives: Demonstrate the use of geometric linear analysis. Observe the behavior of the cantilever beam under four increasing load magnitudes.
More informationInstructions for Muffler Analysis
Instructions for Muffler Analysis Part 1: Create the BEM mesh using ANSYS Specify Element Type Preprocessor > Element Type > Add/Edit/Delete Add Shell Elastic 4 Node 181 Close Specify Geometry Preprocessor
More informationUniversity of Utah ME EN 6510/5510 Introduction to Finite Elements Fall 2005
University of Utah ME EN 6510/5510 Introduction to Finite Elements Fall 2005 Running ANSYS on the CADE lab workstations CADE Lab Accounts You need to get account information in EMCB 224 from the operators
More informationECE421: Electronics for Instrumentation
ECE421: Electronics for Instrumentation Lecture #8: Introduction to FEA & ANSYS Mostafa Soliman, Ph.D. March 23 rd 2015 Mostafa Soliman, Ph.D. 1 Outline Introduction to Finite Element Analysis Introduction
More informationFINITE ELEMENT ANALYSIS LABORATORY MANUAL ANSYS. Course Instructor: Dr. R.Ganesan
FINITE ELEMENT ANALYSIS MECH 460 LABORATORY MANUAL ANSYS Course Instructor: Dr. R.Ganesan Prepared by A. Zabihollah Approved by Dr. R. Ganesan Winter 2007 Table of Contents 1. INTRODUCTION.3 1.1 Starting
More informationChapter 3. Thermal Tutorial
Chapter 3. Thermal Tutorial Tutorials> Chapter 3. Thermal Tutorial Solidification of a Casting Problem Specification Problem Description Prepare for a Thermal Analysis Input Geometry Define Materials Generate
More informationStructural static analysis dome
Structural static analysis dome Calculate the maximum displacements of the dome depicted in Fig.1 and consisting of two types of beams with the crosssectional area: 0.08m*0.21m ( zig-zags ) and 0.07m*0.16m
More informationDhanalakshmi College Of Engineering
Dhanalakshmi College Of Engineering Manimangalam, Tambaram, Chennai 601 301 DEPARTMENT OF MECHANICAL ENGINEERING ME 6711 SIMULATION AND ANALYSIS LABORATORY VII SEMESTER - R 2013 LABORATORY MANUAL Name
More informationANSYS EXERCISE ANSYS 5.6 Temperature Distribution in a Turbine Blade with Cooling Channels
I. ANSYS EXERCISE ANSYS 5.6 Temperature Distribution in a Turbine Blade with Cooling Channels Copyright 2001-2005, John R. Baker John R. Baker; phone: 270-534-3114; email: jbaker@engr.uky.edu This exercise
More informationExercise 1. 3-Point Bending Using the Static Structural Module of. Ansys Workbench 14.0
Exercise 1 3-Point Bending Using the Static Structural Module of Contents Ansys Workbench 14.0 Learn how to...1 Given...2 Questions...2 Taking advantage of symmetries...2 A. Getting started...3 A.1 Choose
More informationIntroduction To Finite Element Analysis
Creating a Part In this part of the tutorial we will introduce you to some basic modelling concepts. If you are already familiar with modelling in Pro Engineer you will find this section very easy. Before
More information5. Shell Reinforcement According To Eurocode 2
5. Shell Reinforcement According To Eurocode Applicable CivilFEM Product: All CivilFEM Products Level of Difficulty: Moderate Interactive Time Required: 5 minutes Discipline: Concrete Shell Reinforcement
More informationCourse in. FEM ANSYS Classic
Course in Geometric modeling Modeling Programme for Lesson: Modeling considerations Element Type Real Constants Material Properties Sections Geometry/Modeling WorkPlane & Coordinate systems Keypoints Lines
More informationME 442. Marc/Mentat-2011 Tutorial-1
ME 442 Overview Marc/Mentat-2011 Tutorial-1 The purpose of this tutorial is to introduce the new user to the MSC/MARC/MENTAT finite element program. It should take about one hour to complete. The MARC/MENTAT
More informationComputer Aided Engineering Lab (MEP72) Manual CAE LAB MANUAL- IV YEAR / VII SEMESTER Prepared by Hemanth Kumar. R Assistant Professor
SRI MANAKULA VINAYAGAR ENGINEERING COLLEGE (Approved by AICTE, New Delhi & Affiliated to Pondicherry University) (Accredited by NBA-AICTE, New Delhi ISO 9001:2000 certified Institution & Accredited by
More informationIntroduction to MSC.Patran
Exercise 1 Introduction to MSC.Patran Objectives: Create geometry for a Beam. Add Loads and Boundary Conditions. Review analysis results. MSC.Patran 301 Exercise Workbook - Release 9.0 1-1 1-2 MSC.Patran
More informationStatically Indeterminate Beam
Problem: A rectangular aluminum bar.5 inches thick and 2 inches wide is welded to fixed supports at the ends, and the bar supports a load W=800 lb, acting through the pin as shown. Find the reactions at
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationMECH 3130: Mechanics of Materials. Fall Laboratory Manual. Volume II
MECH 3130: Mechanics of Materials Fall 2015 Laboratory Manual Volume II Instructor Dr. Peter Schwartz Dr. Nels Madsen Lab Teaching Assistants Quang Nguyen: qzn0003@auburn.edu Abhiram Pasumarthy rzp0025@auburn.edu
More informationImportant Note - Please Read:
Important Note - Please Read: This tutorial requires version 6.01 or later of SAFE to run successfully. You can determine what version of SAFE you have by starting the program and then clicking the Help
More informationA rubber O-ring is pressed between two frictionless plates as shown: 12 mm mm
Problem description A rubber O-ring is pressed between two frictionless plates as shown: Prescribed displacement C L 12 mm 48.65 mm A two-dimensional axisymmetric analysis is appropriate here. Data points
More informationFINITE ELEMENT ANALYSIS OF A PROPPED CANTILEVER BEAM
FINITE ELEMENT ANALYSIS OF A PROPPED CANTILEVER BEAM Problem Description: Instructor: Professor James Sherwood Revised: Venkat Putcha, Dimitri Soteropoulos Programs Utilized: HyperMesh Desktop 12.0, OptiStruct,
More informationShear and Moment Reactions - Linear Static Analysis with RBE3
WORKSHOP 10a Shear and Moment Reactions - Linear Static Analysis with RBE3 250 10 15 M16x2 bolts F = 16 kn C B O 60 60 200 D A Objectives: 75 75 50 300 Create a geometric representation of the bolts. Use
More informationAnalysis Steps 1. Start Abaqus and choose to create a new model database
Source: Online tutorials for ABAQUS Problem Description The two dimensional bridge structure, which consists of steel T sections (b=0.25, h=0.25, I=0.125, t f =t w =0.05), is simply supported at its lower
More informationCAD/CAM LABORATORY MANUAL
BALAJI INSTITUTE OF TECHNOLOGY AND SCIENCE LAKNEPALLY (V), NARSAMPET (M), WARANGAL-506331 CAD/CAM LABORATORY MANUAL DEPARTMENT OF MECHANICAL ENGINEERING N. KISHORE KUMAR, Assistant professor LIST OF EXPERIMENTS
More informationExercise 2: Bike Frame Analysis
Exercise 2: Bike Frame Analysis This exercise will analyze a new, innovative mountain bike frame design under structural loads. The objective is to determine the maximum stresses in the frame due to the
More informationFinite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam
Problem Specification Finite Element Course ANSYS Mechanical Tutorial Tutorial 3 Cantilever Beam Consider the beam in the figure below. It is clamped on the left side and has a point force of 8kN acting
More informationA pipe bend is subjected to a concentrated force as shown: y All dimensions in inches. Material is stainless steel.
Problem description A pipe bend is subjected to a concentrated force as shown: y 15 12 P 9 Displacement gauge Cross-section: 0.432 18 x 6.625 All dimensions in inches. Material is stainless steel. E =
More informationDynamics and Vibration. Tutorial
Dynamics and Vibration Tutorial Startup To use Dynamics and Vibration Analysis (DVA), you must first start TK Solver. Once in TK, select Dynamics & Vibration from the Applications Menu. The DVA Menu will
More informationAppendix B: Creating and Analyzing a Simple Model in Abaqus/CAE
Getting Started with Abaqus: Interactive Edition Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE The following section is a basic tutorial for the experienced Abaqus user. It leads you
More informationCE366/ME380 Finite Elements in Applied Mechanics I Fall 2007
CE366/ME380 Finite Elements in Applied Mechanics I Fall 2007 FE Project 1: 2D Plane Stress Analysis of acantilever Beam (Due date =TBD) Figure 1 shows a cantilever beam that is subjected to a concentrated
More information300 N All lengths in meters. Step load applied at time 0.0.
Problem description In this problem, we subject the beam structure of problem 1 to an impact load as shown. 300 N 0.02 0.02 1 All lengths in meters. Step load applied at time 0.0. E = 2.07 10 11 N/m 2
More informationCOMPUTER AIDED ENGINEERING. Part-1
COMPUTER AIDED ENGINEERING Course no. 7962 Finite Element Modelling and Simulation Finite Element Modelling and Simulation Part-1 Modeling & Simulation System A system exists and operates in time and space.
More information300 N All lengths in meters. Step load applied at time 0.0. The beam is initially undeformed and at rest.
Problem description In this problem, we subject the beam structure of problem 1 to an impact load as shown. 300 N 0.02 0.02 1 All lengths in meters. Step load applied at time 0.0. E = 2.07 10 11 N/m 2
More informationStresses in an Elliptical Beam
Problem: An offset tensile link is shaped to clear an obstruction with a geometry as shown in the figure. The cross section at the critical location is elliptical, with a major axis of 4 in and a minor
More informationCommand. Command BOUNDARY CONDITIONS. 4.4 Mode analysis of a one-axis precision moving table using elastic hinges 201
4.4 Mode analysis of a one-axis precision moving table using elastic hinges 201 C D Figure 4.96 Window of Element Sizes on Picked Lines. (5) Pick the area of the table on NSYS Graphics window and click
More informationIn part 2, we demonstrate the following additional topics:
Problem description In this problem, we analyze a simple beam structure. Each part of this lesson shows the solution of one of the analyses. In part 1, we demonstrate the following topics: Starting up/shutting
More informationEssay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS
Essay 5 Tutorial for a Three-Dimensional Heat Conduction Problem Using ANSYS 5.1 Introduction The problem selected to illustrate the use of ANSYS software for a three-dimensional steadystate heat conduction
More informationFINITE ELEMENT ANALYSIS OF A PROPPED CANTILEVER BEAM
FINITE ELEMENT ANALYSIS OF A PROPPED CANTILEVER BEAM Problem Description: Instructor: Professor James Sherwood Revised: Venkat Putcha, Dimitri Soteropoulos, Sanjay Nainani Programs Utilized: HyperMesh
More informationProblem description. It is desired to analyze the cracked body shown using a 3D finite element mesh: Top view. 50 radius. Material properties:
Problem description It is desired to analyze the cracked body shown using a 3D finite element mesh: Top view 30 50 radius 30 Material properties: 5 2 E = 2.07 10 N/mm = 0.29 All dimensions in mm Crack
More informationInterface with FE programs
Page 1 of 47 Interdisciplinary > RFlex > Flexible body Interface Interface with FE programs RecurDyn/RFlex can import FE model from ANSYS, NX/NASTRAN, MSC/NASTRAN and I-DEAS. Figure 1 RecurDyn/RFlex Interface
More informationFigure E3-1 A plane struss structure under applied loading. Start MARC Designer. From the main menu, select STATIC STRESS ANALYSIS.
Example 3 Static Stress Analysis on a Plane Truss Structure Problem Statement: In this exercise, you will use MARC Designer software to carry out a static stress analysis on a simple plane truss structure,
More informationLinear Static Analysis of a Spring Element (CELAS)
Linear Static Analysis of a Spring Element (CELAS) Objectives: Modify nodal analysis and nodal definition coordinate systems to reference a local coordinate system. Define bar elements connected with a
More informationCreating and Analyzing a Simple Model in Abaqus/CAE
Appendix B: Creating and Analyzing a Simple Model in Abaqus/CAE The following section is a basic tutorial for the experienced Abaqus user. It leads you through the Abaqus/CAE modeling process by visiting
More informationANSYS Tutorial Version 6
ANSYS Tutorial Version 6 Fracture Analysis Consultants, Inc www.fracanalysis.com Revised: November 2011 Table of Contents: 1.0 Introduction... 4 2.0 Tutorial 1: Crack Insertion and Growth in a Cube...
More informationStiffness of Tapered Beam
Problem: A bar in tension has a conical shape of length L. The task is to find the stiffness of the tapered section. Compare the stiffness given by ANSYS to the theoretical stiffness given by: EA1 ( r2
More informationLearning Module 8 Shape Optimization
Learning Module 8 Shape Optimization What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner with
More informationTable of Contents Section 10 HAZCOM Database About This Application... 2 Launch Application... 3 Main Menu... 4 DB Technical Help...
Table of Contents Section 10 HAZCOM Database About This Application... 2 Launch Application... 3 Main Menu... 4 DB Technical Help... 5 HAZCOM Database Users Manual... 6 About This Application Section 10
More informationLinear Buckling Load Analysis (without spring)
WORKSHOP PROBLEM 4a Linear Buckling Load Analysis (without spring) Objectives: Create and prepare the appropriate model for the analysis. Demonstrate the use of linear buckling analysis. MSC/NASTRAN for
More information1.992, 2.993, 3.04, 10.94, , Introduction to Modeling and Simulation Prof. F.-J. Ulm Spring FE Modeling Example Using ADINA
1.992, 2.993, 3.04, 10.94, 18.996, 22.091 Introduction to Modeling and Simulation Prof. F.-J. Ulm Spring 2002 FE Modeling Example Using ADINA H Hgρ w ργ H = B = 10 m g = 9.81 m/s 2 ρ = 2400 kg/m 3 ρ w
More informationTorsional-lateral buckling large displacement analysis with a simple beam using Abaqus 6.10
Torsional-lateral buckling large displacement analysis with a simple beam using Abaqus 6.10 This document contains an Abaqus tutorial for performing a buckling analysis using the finite element program
More informationA plate with a hole is subjected to tension as shown: z p = 25.0 N/mm 2
Problem description A plate with a hole is subjected to tension as shown: z p = 25.0 N/mm 2 56 y All lengths in mm. Thickness =1mm E = 7.0 10 4 N/mm = 0.25 10 20 This is the same problem as problem 2.
More informationTWO-DIMENSIONAL PROBLEM OF THE THEORY OF ELASTICITY. INVESTIGATION OF STRESS CONCENTRATION FACTORS.
Ex_1_2D Plate.doc 1 TWO-DIMENSIONAL PROBLEM OF THE THEORY OF ELASTICITY. INVESTIGATION OF STRESS CONCENTRATION FACTORS. 1. INTRODUCTION Two-dimensional problem of the theory of elasticity is a particular
More information