MicroLab Component Holders
|
|
- Joleen Manning
- 5 years ago
- Views:
Transcription
1 $ Mirror and beamsplitter mounts $ Lens holders $ Optical component cell systems $ Prism/tilt table $ Polarizer holders $ Fiber holders Stable optical component holders are critical for aligning any optical system. Melles Griot manufactures a comprehensive range of MicroLab component holders designed to satisfy any alignment need. Each mount is designed to be as compact as possible, yet still convenient to use. Because they are all either post or base mountable, it is simple to build and align optical systems. Kinematic mirror mounts provide precise angular alignment for most applications. Gimbal mirror and beamsplitter mounts maintain the optical path length during adjustment since there is no translation of the optic. The precision flexure mirror/optics mount has a 1-mm-diameter aperture so that both transmissive and Holders are available for a wide range of optics and accessories. OEM ASK ABOUT OUR CUSTOM CAPABILITIES MicroLab Component Holders reflective optics can be aligned. Holders for mirrors, lenses, and other optics simply attach to the front of each of these adjustable mounts. The MicroLab system is designed for optical components that typically range from 5 to 15 mm in size. Since small optics are difficult to handle, a series of optical mounting cells is available to use with them. Once mounted in a cell, lenses can be handled easily. Cell-mounted lenses and other optics can be tilted with a mirror/optics mount or translated with a y-z positioner. For maximum mounting flexibility, an adjustable lens holder is also offered. Fiber optics, mounted in a V-groove fiber holder, can be aligned with a y-z positioner and translation stage (go to page 21.7). A prism/tilt table with integral rotation is ideal for aligning right-angle prisms or cube beamsplitters. The optic is securely held down with a component retainer. A filter holder, designed to hold round or square flat optical components, is also available. Precision rotation of polarizers and retardation plates can be accomplished with either the single or double polarizer holder Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
2 Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Miniature Mirror/Beamsplitter Mounts Miniature Gimbal Mirror Mount $ Self-contained true gimbal mechanism $ High-strength hexagonally shaped body $ Post or base mountable This gimbal mirror mount provides 8 degrees of precise angular adjustment about two orthogonal axes which intersect at the center of the front surface of the optic. The length of the optical path, therefore, remains constant during adjustment. Optics from 1 to 12.7 mm (0.5 inch) are held in this mount with a retaining ring. Mirrors up to mm in thickness and plate beamsplitters up to 1 mm in thickness can be mounted. Precision stainless steel 0.35-mm-pitch (73-TPI) adjustment screws yield an angular resolution of 13 arc seconds. Two M4-threaded and two M2-threaded holes are provided to post mount or to attach an 07 ACF 501 base mounting adaptor (go to page 21.39). The gimbal mount is made of black-anodized aluminum holes threaded M2 2 holes threaded M4 07 MEG 501 gimbal mirror mount Miniature Gimbal Mirror Mount f12.8 f max thickness Component Maximum Optical Diameter Clear Edge Axis Range Aperture Thickness Height PRODUCT (mm) (mm) (mm) (mm) NUMBER MEG 501 Optical Rails and Lab Jacks Gimbal mirror mounts pivot the mirror s surface about the axes of rotation. 07 MEG 501 is used to fold the optical path in this application
3 Precision Flexure Mirror/Optic Mount This mount has three high-precision adjusting screws which allow 82 degrees of tilt when just one screw is turned and 1 mm of translation along the optical axis when all three screws are turned an equal amount. The stainless steel, 0.-mm-pitch (2-TPI) adjustment screws with rolling-ball tips provide an angular resolution of 15 arc seconds and a translational resolution of 0.75 mm. The mount utilizes flexures to constrain unwanted motion and strong springs to achieve excellent long-term stability. The 1-mm-diameter aperture through this mount makes it unique. Mirrors, beamsplitters, microscope objective lenses, and cell-mounted components can all be positioned using the component holders described on pages 21.44, One M4-threaded hole and two M2-threaded holes in the base are provided for post or riser block/base mounting. The precision flexure mirror/optics mount is made of brass with a black-chrome finish and black-anodized aluminum. The 07 ACH 501 angle bracket may be used to mount the 07 MFM 501 flexure optics mount or the 07 MEB 501 kinematic tilt mount (go to pages ) in a vertical or horizontal position. Precision flexure mirror/optic mount Precision Flexure Mirror/Optic Mount OEM ASK ABOUT OUR CUSTOM CAPABILITIES 27.5 f set screws threaded M4 4 holes M2 thread on centers f hole threaded M4 2 holes threaded M (nom) 07 MFM 501 flexure mirror/ beamsplitter mounts 07 ACH 501 can be used to mount 07 MFM 501 horizontally. Optic Diameter Angular Angular Optical Axis Height PRODUCT (mm) Range Resolution (mm) NUMBER 1 4 deg 15 arc sec MFM Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
4 Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Kinematic Tilt Mount and Accessories $ 85-degree range $ 15-arc-second resolution $ Post or base mountable This kinematic tilt mount provides smooth adjustment over an angular range of 85 degrees. Precision stainless steel, 0.35-mm-pitch (73-TPI) adjustment screws yield an angular resolution of 15 arc seconds. 1 to 12.7 mm (0.5 inch) and to.4 mm (1-inch) mirrors are attached to the mount using the 07 MEA 505 and 508 component holders. One M4-threaded hole and two M2-threaded holes are provided in the base for mounting to either a post or a base. When mounting to a base, riser blocks can be used to raise the fixed optical-axis height. If the 07 MEB 501 kinematic tilt mount is post-mounted on a MicroLab breadboard as a kinematic mirror mount, the 07 MEA 5 center of rotation base plate will locate the surface of the mirror directly above the axis of the mounting post allowing the 07 MEB 501 mirror to rotate on the post and still be on axis at 45 degrees or other angles. The 07 MEA 5 center of rotation base plate attaches directly to the bottom of the 07 MEB 501 with two M2 screws. When mounted horizontally on top of a post, this mount, with the addition of the 07 TTD 501 or 503 (go to pages 21.38, 23.2, becomes a prism or cube-beamsplitter tilt table. The kinematic tilt mount is made of black-anodized aluminum. Kinematic Tilt Mount and Accessories Kinematic Tilt Mount 07 MEB 501 Center-of-Rotation Base Plate 07 MEA 5 Angle Bracket 07 ACH hole 1 hole threaded M4 threaded M MEB 501 kinematic tilt mount 1 4 holes threaded M2 3 deep 2 holes threaded M2 3 deep hole threaded M4 Optical Rails and Lab Jacks 07 MEB 501 kinematic tilt mount
5 17 1 M4 M holes f2.4 thru c'bored f4.4!2.2 deep 5 Fixed Optical Mounts 07 MEA 5 center-of-rotation base plate for 07 MEB 501 OEM hole f4.8 thru 4 holes f2.4 thru c'bored f4.4!2.4 deep 07 ACH 501 angle bracket ASK ABOUT OUR CUSTOM CAPABILITIES 3 8 holes f2.4 thru on centers MicroLab adaptor plates and brackets provide additional set up flexibility. Angle Bracket Applications The 07 ACH 501 angle bracket may be used to mount 07 MFM 501 or 07 MEB 501 in a vertical or horizontal position Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
6 Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Component Holders Melles Griot makes a variety of optical component holders designed to mount 1-mm (0.5-inch) and -mm (1-inch) components securely to the 07 MEB 501 kinematic tilt mount (go to pages ) or the 07 MFM 501 flexure optics mount (go to pages 21.33, 23.15). With 1-mm-diameter optics, the optic is mounted in a plate which attaches to the front face of the mount. The optic rests on two nylon rods and is firmly held in place with a nylon-tipped setscrew. With -mm-diameter components, the optic is held directly against the front surface of the mount by a plate that mounts over the front face of the optic. It is attached to the mirror mount with four screws. The maximum optical thickness is limited only by the length of the screws used; several lengths are provided. A 23-mm clear aperture is maintained. All of these optical component holders are made of black-anodized aluminum. Optical Component Holders Optic Diameter PRODUCT (mm) NUMBER MEA MEA hole M2 threaded 1 4 holes f2.4 thru counterbored f4.4!2.2 deep 1 f14 f M2 nylon-tipped setscrew 07 MEA 505 optical component holder for 1-mm optics 4 holes f2.4 thru f MEA 508 optical component holder for -mm optics Optical Rails and Lab Jacks 07 MEA optical component holder 07 MEB 501 shown with 07 MEA 505 and 508 component holders
7 Prism/Tilt Table and Accessories Prism/Tilt Table with Rotation This tilt table is ideal for aligning prisms and cube beamsplitters. With 85 degrees of tilt in both axes and a full 30 degrees of rotation, alignment to other components is simple. Precision 0.35-mm-pitch (73-TPI) stainless steel adjustment screws provide 15 arc second resolution. The platform can be rotated by hand and the position locked with a thumbscrew. The base has four M2 clearance holes for mounting. The tilt table must be removed from the base prior to mounting. If the base is removed, a central M4 thread in both the back and one edge of the tilt table can be used for mounting on a post. The tilt table is made of black-anodized aluminum. Prism/Tilt Table with Rotation Tilt (both axes) Rotation TTC 501 Prism/tilt table with rotation OEM ASK ABOUT OUR CUSTOM CAPABILITIES 1 hole threaded M holes threaded M2 on centers 07 TTC 501 prism/tilt table with rotation 1 hole threaded M4 4 holes f thru Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
8 Fixed Optical Mounts Adjustable Optical Mounts Component Retainers Optical components such as prisms and cube beamsplitters can be held in place on 07 MHT-series kinematic tables or other prism/ beamsplitter tables using 07 TTD-series component holders TTD 001 component retainer 3 f max M4 threaded 4 11 f4 f4 Miniature Universal Lens Holder Optical components in a diameter range of from 5 to 15 mm can be mounted in this holder. The bottom has two sides, one side for round optics and the other for square optics. The vertical posts are simply threaded into either side. There is a central M2-threaded hole for post mounting and two M2 clearance holes for base mounting. This holder is made of black-anodized aluminum and stainless steel. f holes f thru Mounting Posts, Bases, and Brackets 7 23 max 4 30 M2 threaded max f 1 07 TTD TTD TTD 501 and 503 component retainers 30 f5 min f15 max 1 hole threaded M2 30 Component Retainers 07 LHA 511 miniature universal lens holder Optical Rails and Lab Jacks Max Height Mounting PRODUCT (mm) Thread NUMBER Single-Post Component Retainer 3 M4 07 TTD 001 Single-Post Component Retainer 23 M2 07 TTD 501 Double-Post Component Retainer M2 07 TTD 503 Miniature Universal Lens Holder Lens Diameter PRODUCT (mm) NUMBER LHA
9 Polarizer Holders Polarizer holders are available for rotating either one or two polarizers. The precision single-polarizer holder mounts from 1- to 12.7-mm (0.5-inch) polarizers up to 8 mm in thickness. The double polarizer holder allows rotation of one polarizer relative to another and mounts from 1- to 12.7-mm (0.5-inch) polarizers up to 5.5 mm in thickness. A.-mm-diameter recess is provided in both for centering -mm-diameter retardation plates. The polarizers are held in place by a retaining ring. After manual rotation, the position is locked with a thumbscrew. The single holder has engraved markings every degrees, as well as marks every 45 degrees. There is a central M4-threaded hole in its base for post mounting and two M2-threaded holes for riser block/base mounting. The 07 ACF 501 base mounting adaptor can also be used. The double holder has markings every 45 degrees. It has a central M2-threaded hole for post mounting and two M2 clearance holes for base mounting. Both polarizer holders are made of black-anodized aluminum. 2 holes f thru OEM f9 M2 threaded HPV 501 double-polarizer holder ASK ABOUT OUR CUSTOM CAPABILITIES 5.5 max f. f f12.8 M4 threaded 07 HPR 511 single-polarizer holder M2 threaded 8 8 max f. 2 holes threaded M holes f thru f8.5 5 f4.5 thru 07 ACF 501 base mounting adaptor Polarizer Holders Maximum Edge Thickness Description (mm) Single-Polarizer Holder 8 07 HPR 511 Double-Polarizer Holder 5 07 HPV 501 Base Mounting Adaptor 07 ACF f9 Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
10 Fixed Optical Mounts Adjustable Optical Mounts Microscope Objective Holders Microscope objectives are frequently used as focusing lenses in laser systems because of their convenience. These microscope objective holders provide a simple method of mounting microscope objectives or other components with an RMS thread (0.8 in., 3 TPI) to mirror mounts and positioners. All holders are made from aluminum with a black-anodized finish. For compatible mirror mounts go to pages 21.33, 21.34, For a wide selection of mounting posts, go to page For 1-mm cell holders go to pages 21.43, 23.. f3 8-32! deep 17 M4!1.0! deep RMS thread 1/4-! deep RMS thread f f15.5 f1 07 HMO 505 objective holder for 1-mm cell holders RMS thread 4 holes clearance for M2 on centers 5 07 MEA 518 objective holder for MicroLab mirror mount Mounting Posts, Bases, and Brackets M!1.0! deep 07 HMO 001 post-mountable objective holder RMS thread holes clearance for M2 on centers 50 4 holes threaded M2 on centers RMS thread 07 MEA 519 extended objective holder for MicroLab mirror mount 5 Optical Rails and Lab Jacks HMO 503 objective base mount!2 1 hole threaded M2 5 Microscope Objective Holders Post-Mountable Objective Holder 07 HMO 001 Objective Base Mount 07 HMO 503 Objective Holder for 1-mm Cell System 07 HMO 505 Standard Objective Holder for MicroLab Mirror Mount 07 MEA 518 Extended Objective Holder for MicroLab Mirror Mount 07 MEA
11 Microcomponent Holder This mount is designed to hold optical fibers, gradient index lenses or prisms. When the spring-loaded knob is pulled up, the component can be placed on the platform, which has a small V-groove. When the knob is slowly released, a nylon pad clamps the component down to the platform. The base has both M2 clearance holes for mounting and slots for rotation. The microcomponent holder is made of black-anodized aluminum. Miniature Filter Holder This filter holder is designed to hold any flat optical component less than 4 mm in thickness. The optic can be round or square, large or small. Two nylon-tipped thumbscrews hold the filter against nylon pads. For smaller components, one central thumbscrew can be used. An M2-threaded hole is provided for post mounting. The filter holder is made of black-anodized aluminum. Fixed Optical Mounts OEM VIEW A f15 f max 4 holes f thru 4 slots wide thru 07 HMC 501 microcomponent holder Microcomponent Holder ASK ABOUT OUR CUSTOM CAPABILITIES f VIEW A 40 Microcomponent Holder 07 HMC 501 Microcomponent holder with fiber-optic chuck 4 M3 threaded M2 threaded HFP 501 single-filter holder Miniature Filter Holder Filter Thickness Maximum (mm) 4 07 HFP 501 Optical filters can be mounted in several different ways Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
12 Fixed Optical Mounts V-Groove Fiber Holder The 07 HFV V-groove fiber holder is ideal for securing bare optical fibers. The fiber is held in the precision groove by two padded magnetic clamps. The holder is made of stainless steel and is designed for 1-mm clad fibers. Laser Holder for 32-mm-Diameter Lasers This mount is designed to hold 32-mm-diameter diode or helium neon lasers, such as 0 DAL 001 or 05 LLR Adjustable Optical Mounts Mounting Posts, Bases, and Brackets precision V-groove magnetic clamp HFV 503 V-groove fiber holder V-Groove Fiber Holder V-Groove Fiber Holder with Two Magnetic Clamps 07 HFV HLJ 501 laser holder 4 holes f thru 32 Laser Holder for 32-mm-Diameter Lasers f47 Laser Holder 07 HLJ 501 Optical Rails and Lab Jacks Optical setup using V-groove fiber holder The 07 HVB holder also can be used to mount similar sized lasers
13 Lens Cell System Miniature Two-Axis Positioner for Optical Component Cells This two-axis positioner allows 1-mm-diameter cell-mounted components to be aligned in the y-z plane. Cells are held in the mount with a setscrew. Up to 2 mm of adjustment in each axis can be made by using precision stainless steel, 0.35-mm-pitch (73-TPI) thumbscrews with 1-mm resolution. Standard optical component cells, cell-mounted gradient-index lenses, microscope objectives, spherical ball lenses, 0 GLC lenses, pinholes and slits, and fiber chucks can all be positioned with this mount. There is an M4-threaded hole in the base for post mounting or attaching the 07 ACF 501 base mounting adaptor. The two-axis positioner is made of black-anodized aluminum. OEM 13.5 M4 threaded max TPE 501 two-axis positioner ASK ABOUT OUR CUSTOM CAPABILITIES 12 max 35 Miniature Two-Axis Positioner for Optical Component Cells Do you need... MICROSCOPE OBJECTIVE HOLDER FOR 1-MM LENS CELL SYSTEM Two-Axis Positioner for Optical Component Cells 07 TPE 501 These two-axis positioners hold a variety of optical components through the 1-mm cell adaptors. The 07 HMO 505 microscope objective holder adapts standard RMS-threaded microscope objectives to the 07 TPE 501 two-axis positioner. Adapts to any 1-mm cell holder Attaches with a single set screw Made from black-anodized aluminum For complete product specifications and to see the complete line of microcope objective holders, go to pages 17.13, Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
14 Fixed Optical Mounts Adjustable Optical Mounts Optical Component Cells $ Convenient mounting of lenses and other miniature optics $ Accepts 5- to 17.5-mm-diameter optics $ Standard -, 1-, and -mm cells These cells are designed to hold lenses and other components for easier handling while mounting. There are three basic cell outer diameters:, 1, and mm. The cells cover a component diameter range of from 5 to 17.5 mm. The optic is securely held in the cell with a retaining ring. The cells are made of black-anodized aluminum. fa fb fc Optical component cells 3 max edge thickness Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks 07 HOD optical component cells Optical Component Cells Maximum Component Edge Diameter fa fb fc Thickness Range PRODUCT (mm) (mm) (mm) (mm) (mm) NUMBER HOD HOD HOD HOD HOD 511 Use tweezers to place lenses into the component cell as shown
15 Fiber-Chuck Holder With this holder, fiber chucks can be mounted into any 1-mm-diameter cell holder. The fiber chuck is firmly held in the double-bored hole with a setscrew. The fiber-chuck holder is made of black-anodized aluminum. OEM f.4 thru M3 setscrew 07 HFC 507 fiber-chuck holder Fiber-Chuck Holder ASK ABOUT OUR CUSTOM CAPABILITIES 14 3 f15.95 Fiber-Chuck Holder 07 HFC 507 Fiber-chuck holder shown with 17 HFC 005 fiber chuck Spherical Ball Lens Holders The spherical ball lens holders are designed to be mounted in 1-mm cell holders. Once mounted, the lenses can be aligned using the 07 TPE 501 two-axis positioner. Three mounts are offered, one for each size of ball lens (2, 3, and 5 mm). The ball lenses are securely held in the cell with a retaining ring. The ball protrudes from one side of the mount allowing close access to the lens. The spherical ball lens holders are made of black-anodized aluminum. 07 HCS spherical ball lens holder Spherical Ball Lens Holders Spherical ball lens holders f1 Sphere Diameter (mm) 2 07 HCS HCS HCS Fixed Optical Mounts Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
16 Fixed Optical Mounts Lens Holders for 0 GLC Lenses The 0 GLC collimating and focusing lenses, described on pages are either 8.71 or mm in diameter. The 07 HGC 501 and 503 lens holders adapt these lenses for mounting in a 1-mm cell holder. Once mounted, the lens can be aligned using the 07 TPE 501 two-axis positioner (go to pages 21.43, 23.). The 07 HGC 003 lens holder is designed for mounting in a microscope objective lens holder. Both types of holders are made of black-anodized aluminum. Adjustable Optical Mounts f8.71 f HGC HGC 503 Lens holders for 1-mm cell holders f1 Lens holders for 0 GLC lenses Do you need... MICROSCOPE OBJECTIVE HOLDER FOR 1-MM LENS CELL SYSTEM Mounting Posts, Bases, and Brackets RMS thread (.8 inch-3 TPI) 14.8 f28. f /4-. M! HGC 003 lens holder with RMS mounting thread f12.39 The 07 HMO 505 microscope objective holder adapts standard RMS-threaded microscope objectives to the 07 TPE 501 two-axis positioner. Adapts to any 1-mm cell holder Attaches with a single set screw Made from black-anodized aluminum For complete product specifications and to see the complete line of microcope objective holders, go to pages 17.13, Lens Holders for 0 GLC Lenses Optical Rails and Lab Jacks PRODUCT Description NUMBER 1-mm Cell Holders 07 HGC mm Cell Holders 07 HGC 503 For Microscope Objective Holders 07 HGC
17 Pinhole/Slit Holder Unmounted 9.5-mm-diameter precision pinholes or slits can be mounted in this 1-mm-diameter cell. Once mounted, pinholes and slits are much easier to handle and can be aligned using the 07 TPE 501 two-axis positioner described on pages 21.43, 23.. The pinhole or slit is placed between two nylon washers which are held in the mount by a retaining ring. The pinhole/slit holder is made of black-anodized aluminum. Fixed Optical Mounts f1 07 HPI 501 pinhole/slit holder Pinhole/slit holder f4 f9.5 Mounted pinholes can be held using the 07 HPH 001 pinhole/slit positioner. Pinhole/Slit Holder Pinhole/Slit Holder 07 HPI 501 Do you need... PRECISION PINHOLES AND SLITS Melles Griot offers a wide selection of mounted and unmounted precision pinholes and slits. The pinholes and slits are all laser milled in ultrathin 9.5-mm-diameter stainless steel substrates. 04 PIP-series pinholes range from 1 mm to 1 mm in diameter. 04 PAS-series slits range from 5 to 0 mm in width and are 3 mm long. High-energy laser pinholes are also available. For more information go to page Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
18 Fixed Optical Mounts Adjustable Optical Mounts Gradient-Index Lens Holders The 07 HGH 501 gradient-index lens holder is designed to be mounted in 1-mm cell holders such as 07 TPE 501. The lens is clamped in a removable nylon V-groove by a setscrew that pushes against a nylon pad. Two V-grooves are supplied, one for 1-mm lenses and the other for 1.8- to 2-mm lenses. The 07 HGI 505 lens holder has an integral base and a small V-groove with a stainless steel spring clip to hold the lens. 07 HGI 021 is a post-mountable gradient-index lens holder with an M mounting thread. This holder, with a twist of the thumbscrew, clamps the lens between a V-groove and a nylon rod. f2 max f1 min 7 f1 45 deg M threaded 07 HGI 021 post mountable gradient-index lens holder Gradient-Index Lens Holders For 1-mm Cell Holders 07 HGH 501 Spring Clip with Integral Base 07 HGI 505 Post Mountable, M thread 07 HGI 021 Mounting Posts, Bases, and Brackets 07 HGH 501 gradient-index lens holder for 1-mm cell holders f2 max f1 min 1 2 holes f thru Optical Rails and Lab Jacks 07 HGI 505 gradient-index lens holder with integral base The family of gradient-index lens holders
19 Iris Diaphragms These two iris diaphragms mount in the 07 HOC-series sideloading cell holders (go to page 21.50). The 04 IDC 000 iris diaphragm, which is 14.8 mm in diameter, requires an 07 HID 507 adaptor ring to be able to mount in the 1-mm cell holders. The adaptor ring has a slot to enable adjustment of the actuating pin. The 04 IDC 001 iris diaphragm mounts directly into -mm cell holders. Fixed Optical Mounts f0.8 min OEM f1 f8 f14.8 max f IDC HID 507 ASK ABOUT OUR CUSTOM CAPABILITIES f1 f IDC 000 iris diaphragm and 07 HID 507 adaptor ring for 1-mm cell holders f0.9 min. f12 max 5 11 f IDC 001 iris diaphragm for -mm cell holders Iris Diaphragms Iris Diaphragm for 1-mm cell holders 04 IDC 000 Iris Diaphragm for -mm cell holders 04 IDC 001 Adaptor Ring for 04 IDC 000 (fits 1-mm cell holders) 07 HID 507 Iris diaphragms and adaptor ring APPLICATION NOTE Pinholes Pinholes can be used in place of iris diaphragms if smaller diameter apertures are needed Adjustable Optical Mounts Mounting Posts, Bases, and Brackets Optical Rails and Lab Jacks
20 Fixed Optical Mounts Cell Holders There are two types of cell holders: post mount and side-loading. Both are available for -, 1-, and -mm cells. The 1-mm, side-loading holders are offered in two heights: and 15 mm. All have a central M2-threaded hole for post mounting. They are all made of black-anodized aluminum. D B C A Adjustable Optical Mounts Mounting Posts, Bases, and Brackets 1 hole threaded M2 thru 2 (5 is 3 deep) MEA-series cell holders Standard Cell Holders fa fa 3 holes f2.4 thru counterbored f4.4!2.2 deep 1 PRODUCT (mm) NUMBER 07 MEA MEA MEA HOC-series side-loading cell holders Side-Loading Cell Holders 2 holes f thru 1 hole threaded M2 (except 07 HOC 505) A B C D PRODUCT (mm) (mm) (mm) (mm) NUMBER HOC HOC HOC HOC 509 Optical Rails and Lab Jacks These holders provide fixed mounting for any of the component cells
MicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
More informationSTEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER. TECHSPEC Optical Cage System
STEP-BY-STEP INSTRUCTIONS FOR BUILDING A MICHELSON INTERFEROMETER TECHSPEC Optical Cage System INTRODUCTION 2 What is a Michelson Interferometer? A Michelson Interferometer is a simple interferometric
More informationTubeMount system. Section 11 (pp.53-59) Breadboards and bases. Section 12 (pp.60-62) Stages and rod system. Section 13 (pp.63-70)
OPTOMECHANICS - introduction 5 Optomechanics - introduction There are basically two ways of mounting an optical system enclosed or open. Enclosed systems,such as an ordinary microscope,are light- and dust-tight,rigid,
More informationFive-Axis Fiber Aligner Model 9091 and Accessories
USER S GUIDE Five-Axis Fiber Aligner Model 9091 and Accessories Includes Model 9131-FS-FC and Model 9131-FS-ST Fiber-Aligner Kits U.S. Patents: #5,282,393 & #5,400,674 5215 Hellyer Ave. San Jose, CA 95138-1001
More informationTranslation Stages Triple-Divide Series
USER S GUIDE Translation Stages Triple-Divide Series Models 9064 and 9065 U.S. Patent #6,174,102 5215 Hellyer Ave. San Jose, CA 95138-1001 USA phone: (408) 284 6808 fax: (408) 284 4824 e-mail: contact@newfocus.com
More informationRadiant Dyes Laser Accessories GmbH
13. Custom designed opto-mechanics - For industry and science- You design it We manufacture it Customized mirror mounts: - From 2 inch up to 20 inch diameter - From aluminium to ceramic - From red to black
More informationSTEP-BY-STEP INSTRUCTIONS FOR BUILDING AN AUTOCOLLIMATOR. TECHSPEC Optical Cage System
STEP-BY-STEP INSTRUCTIONS FOR BUILDING AN AUTOCOLLIMATOR TECHSPEC Optical Cage System INTRODUCTION 2 What is an autocollimator? The Autocollimator is a precision instrument composed of an achromatic objective,
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More informationRaman Sample Holders
Raman Sample Holders Ocean Optics offers several sample holders for Raman analysis of liquids and solids, including a multipurpose holder that can be configured for fluorescence and other measurements.
More informationCOMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series LSMA-173
COMPACT PRECISION LINEAR MOTORIZED ACTUATORS LSMA Series Narrow Width ized Translation Stages Compact (30 mm) design Precision bearing system Resolution 0.1 microns Standard stroke 20 and 50 mm Optional
More informationEDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM
GAIN 0 Instruction Manual and Experiment Guide for the PASCO scientific Model OS-8537 and OS-8539 02-06575A 3/98 EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM CI-6604A
More informationRadiant Dyes Laser Accessories GmbH. Optomechanics. Innovative Products for Scientific Applications
Radiant Dyes Laser Accessories GmbH Optomechanics Innovative Products for Scientific Applications V6 100 µm/turn (250 TPI) fine thread screws 2 www.radiant-dyes.com Table of Contents Screws 4 Fine Thread
More informationABM's High Resolution Mask Aligner Features:
ABM's High Resolution Mask Aligner is a very versatile instrument with interchangeable light sources which allow Near-UV (405-365 nm) as well as Mid- and Deep-UV (254 nm, 220 nm) exposures in proximity
More informationCylinders in Vs An optomechanical methodology Yuming Shen Tutorial for Opti521 November, 2006
Cylinders in Vs An optomechanical methodology Yuming Shen Tutorial for Opti521 November, 2006 Introduction For rotationally symmetric optical components, a convenient optomechanical approach which is usually
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationSTEP-BY-STEP INSTRUCTIONS FOR BUILDING A FLUORESCENCE MICROSCOPE. TECHSPEC Optical Cage System
STEP-BY-STEP INSTRUCTIONS FOR BUILDING A FLUORESCENCE MICROSCOPE TECHSPEC Optical Cage System INTRODUCTION 2 What is a Digital Fluorescence Microscope? Unlike traditional microscopes, which utilize an
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationCary Fiber Optic Probes
Cary Fiber Optic Probes Fiber Optic Probes Use With Cary 50/60 Wavelength range 200-1100 nm Cary 100/300 Cary 50/60/100/300 Cary 4000/5000/6000i Fiber optic dip probe stainless steel body only Requires
More informationGH-50. Gimbal Head. You re on steady ground
GH-50 Gimbal Head You re on steady ground 1 INTRODUCTION Thank You for choosing Oben! The Oben GH-50 is a gimbal-type tripod head designed to balance a lens along its vertical and horizontal axes. Ideal
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationMeasuring range X / Y mm 100 / / /170 Z travel mm 200 / 400** Max. table load kg 20
- 10 MarVision. Optical Measuring Instruments Workshop Measuring Microscope MarVision MM 220 Applications For measuring distances (QC 100); bore holes and angles and determination of geometric elements
More informationSensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
More informationCalibration of a portable interferometer for fiber optic connector endface measurements
Calibration of a portable interferometer for fiber optic connector endface measurements E. Lindmark Ph.D Light Source Reference Mirror Beamsplitter Camera Calibrated parameters Interferometer Interferometer
More informationHDAF800 HD 1080p Digital Microscope USB drive for Image Capture
HDAF800 HD 1080p Digital Microscope USB drive for Image Capture HDAF800-US Auto-Focus HD Camera System 1080p including Universal Stand with 15" Vertical Pole and integrated LED lighting and controls panels.
More informationLaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
More informationIn-Sight 7000 Series Vision System. Optional Configurations
In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms
More informationOC - Optical Components
99 OC - Optical Components 1 OC-0005 Biconcave lens f=-5 mm, C25 mount A biconcave lens with a diameter of 5 mm and a focal length of -5 mm is mounted into a C25 mount with a free opening of 4 mm. 2 OC-0010
More informationRotary Positioners tangent arm and worm gear drive
Rotary Positioners tangent arm and worm gear drive Parker aedal rotary stages are designed to produce precision rotary motion. The basic components in these stages are a base, main bearing, drive mechanism
More informationPH 481/581 Physical Optics Winter 2018
PH 481/581 Physical Optics Winter 2018 Laboratory #1 Week of January 15 Read: Section 5.2 (pp.151-175) of "Optics" by Hecht Do: 1. Experiment I.1: Thin Lenses 2. Experiment I.2: Alignment Project 3. Experiment
More informationUser manual MB-600 Matte box system Version 1.0.0
User manual MB-600 Matte box system Version 1.0.0 www.vocas.com V 1.0. Index Introduction... 3 Available kits... 4 MB-611 kit, 0600-0611... 4 MB-612 kit, 0600-0612... 4 MB-623 kit, 0600-0623... 4 Guide
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationPOLE DISPLAY SOLUTIONS & ACCESSORIES
& ACCESSORIES Pole Display Solutions Litho poles and bases are an excellent and versatile way to highlight a message. Pole dimensions are in lengths from two to six feet and 1 to 1-3/4 inch diameters.
More informationMPS-GR Series. Mechanical-Bearing, Worm-Driven Rotary Stage. Low profile and compact with aperture. Precision worm-gear drive
Rotary Stages Mechanical-Bearing, Worm-Driven Rotary Stage Low profile and compact with aperture Precision worm-gear drive DC servo or stepper motor Continuous 360 rotary positioning Graduated tabletop
More informationProduct Overview. Features
APCF1 Model Tripod Product Overview The Ravelli APCF1 is a Professional Quality Carbon Fiber Tripod providing a solid base for high-end photographic equipment. This model is a mix of carbon fiber and magnesium
More informationPrism Starter Guide 1.0 Hoskins Lab Last Modified 03/14/2017 Chris DeCiantis
Start Up: Upon entering the laser room turn on the wall mounted Laser Power Button by pulling it away from the wall. Turn on Shutter controllers (toggle switch on back of unit). There should be a U in
More informationLaser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly
Laser Diode Collimators Type 48TE, 48-0, and 44TE, universal modular system for self-assembly Laser Diode Collimators 48TE, 48-0, and 44TE, Laser Diode Base Unit 44TE LD Collimators Types 48TE, 48-0 and
More informationAVT Model Tripod.
AVT Model Tripod www.ravelliphoto.com Product Overview: The Ravelli AVT professional tripod is a high performance, fluid drag tripod that provides smooth continuous drag control and operates on both pan
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationDO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
More information3 TESTING OF OPTICAL COMPONENTS
3 TESTING OF OPTICAL COMPONENTS Measure Optical Figure of Merit, Distortion and Wavefront Quality of Optical Components MODEL OEK-1 00 PROJECT #2 r 30 3.1 Introduction There are many applications in which
More informationBEVEL GEAR WINCH RATIO 3:1
BEVEL GEAR WINCH RATIO 3:1 32 A 34 57 48 45 B 89 82,5 45 54 17 6,5 C Bevel gear in Zamak. Conic mechanism in Zamak. Steel spring brake. Efficiency: 0,60 Floating on ball in Nylon. Right and left rotation.
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationAgilent 10706B High Stability Plane Mirror Interferometer
7D Agilent 10706B High Stability Plane Mirror Interferometer Description Description The Agilent 10706B High Stability Plane Mirror Interferometer (see Figure 7D-1) is an improved version of the Agilent
More informationCovers NewView TM 8000/9000, Nexview TM & Nexview NX2. ZYGO Optical Profiler Accessory Guide OMP 0594J
Covers NewView TM 8000/9000, Nexview TM & Nexview NX2 ZYGO Optical Profiler Accessory Guide OMP 0594J Interferometric Objectives (1) Standard objectives provide a wide range of magnifications to accommodate
More informationPros demand of Tripods, Heads and Support Accessories. And INDURO delivers with a wide and growing range
Tripods, Monopods, Heads and more 2 INDUROGEAR.COM INDURO. ROCK SOLID, NO MATTER WHAT these are the perfect words to define the performance that today s Pros demand of Tripods, Heads and Support Accessories.
More informationAdjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationTELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing
Edmund Optics BROCHURE TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing Contact us for a Stock or Custom Quote Today! UK: +44 (0) 1904
More informationTELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing
Edmund Optics BROCHURE TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationSimply the best fixation. 3D articulated arms Innovative high-quality products
Simply the best fixation. 3D articulated arms Innovative high-quality products 02 Method of operation 04 Measurement Strato Line Base Line Strato µ-line Classic Line Strato set with carrying case Individual
More informationGeneral Catalog Unlocking the full potential of your machines
General Catalog Unlocking the full potential of your machines 182 EROWA ITS Compact Combi Three in one Seamless integration into the existing ITS system. The ITS Compact CombiChucks have the same mounting
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationSection 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationDiagonal FOV 18.5mm - 2.7mm ( inch); Video Magnification 30x-210x on 22" Monitor.
HD803-BSM22 HD803 3D HD High Definition 1080p Rotational Microscope with Detent Working Distance. Diagonal FOV 18.5mm - 2.7mm (0.72-0.10 inch); Video Magnification 30x-210x on 22" Monitor. HD 1080P 60
More informationHighly Efficient Assembly of Lenses with. OptiCentric and OptiCentric Cementing
Highly Efficient Assembly of Lenses with OptiCentric and OptiCentric Cementing Centration Measurement and Lens Alignment Contents OptiCentric Cementing Centration Measurement and Lens Alignment 3 4 Centration
More informationMEMS PACKAGES AND MOUNTS GUIDE
MEMS PACKAGES AND MOUNTS GUIDE Last Updated: 11/27/2017 Mirrorcle Technologies, Inc. Overview Mirrorcle Technologies Inc. ( MTI ) MEMS mirrors are available in the following standard ceramic packages:
More informationSit-Stand Monitor Arm
Sit-Stand Monitor Arm Product ID: ARMSTSCP1 This sit-stand monitor arm transforms your desk or tabletop into an ergonomic workstation. The monitor arm features a keyboard tray and easy height adjustment
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More informationMML-PL25HR. 4-M3 (For Securing Lens) M3 Hexagonal Socket Set Screw (4 Screws Enclosed) ø ø19
44 Prism Adapters Prism adapters make it possible to bend the optical axis at a right angle of, and to perform a mark recognition for microscopic objects by modifying the pitch between 2 MML lenses to
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationAPC Open Frame Rack Networking Solutions
APC Open Frame Rack Networking Solutions NetShelter 2- and 4 Post Open Frame Racks The NetShelter 2 and 4 Post Open Frame Racks offer a quality solution for the economical installation of rackmountable
More information.75 DOOR ACCESSORIES. Concealed Screw Surface Bolts. 4" Concealed Screw Surface Bolt. 6" Concealed Screw Surface Bolt. 8" Concealed Screw Surface Bolt
Concealed Screw Surface Bolts 4" Concealed Screw Surface Bolt 8527 6" Concealed Screw Surface Bolt 8528 8" Concealed Screw Surface Bolt 8529 12" Concealed Screw Surface Bolt 8530.75 Mortise Strike Lip
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationDoor stopper, wall mounting 4-7 Door stopper, floor mounting 8-9. Door stopper, wall mounting 10 Door stopper, floor mounting 11
oor stopper : 8 Content oor stopper Seite Satin stainless steel oor stopper, wall mounting 4-7 oor stopper, floor mounting 8-9 Stainless Steel,black oor stopper, wall mounting 0 oor stopper, floor mounting
More informationMPS50SL Miniature Mechanical-Bearing Screw-Driven Linear Stage
MPSSL Miniature Mechanical-Bearing Screw-Driven Linear Stage Compact mm width, with travel to mm Precision ground ball-screw or lead-screw drive DC servo or stepper motor Crossed-roller bearings High resolution
More informationSets: Adjustable Mounts
Pedestal Mounts Sets: Adjustable Mounts Square mounting surface Combine complete sets with loose parts and create your own unique design as needed. The angle between the pedestal mount parts can be changed
More informationRay Optics. Ray Box Experimental Set up Kit (ELP ) Complete Kit comprising of following :- A. Ray Box with Lamp B. Color filter Set of 7
Ray Optics Ray Track apparatus (ELP.106.177) Wood board with matt white surfaces, mounted on plastic feet, carries a circular scale with 0-360 four quadrants 0-90 graduated every 2, removable turntable
More informationML17 Series Tru-Vue TM Sensors
ML7 Series Tru-Vue TM Sensors Diffuse Mode with Background Suppression See page 44 Features: Ver low color sensitivit Tamper-proof housing with no eternal adjustments Sensing Range: 5 mm Output: 4-in-
More informationAHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationTDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit
TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationA Commitment Like No Other. High Performance Optical Shutters
A Commitment Like Other High Performance Optical Shutters Melles Griot. A commitment like no other. Melles Griot combines deep technical expertise with creative engineering teams who understand how to
More informationSupporting A (list of microscope parts)
Supporting A (list of microscope parts) (all prices 2004) Name Company Item# Quantity Total pric # in Fig. 1 Green laser pointer E-bay N/A 1 $50 1 100x/1.25NAobjective Edmund NT43-909 1 $185 6 Eyepiece
More informationTechnical Data Sheet. PEAK Measuring Microscope 2008 Series
PEAK Measuring Microscope 2008 Series Pocket Stand Microscope 25x, 50x, 75x, 100x magnification 0.05-0.005 mm measuring scale Measure width, thickness, height & depth Peak 2008 Stand Microscopes are small,
More informationFLEXPOINT Laser Modules. Laser Modules For Your Application. laser-components.com
FLEXPOINT Laser Modules Laser Modules For Your Application laser-components.com Get in Contact LASER COMPONENTS USA, Inc. 116 South River Road, Building C Bedford, NH 03110 / USA www.laser-components.com
More informationPolarizers. Laser Polarizers Broadband Polarizing Beamsplitting Cubes 78 Narrowband Polarizing Beamsplitting Cubes 79
Prisms Introduction to Right Angle Prisms 72 Quality Right Angle Prisms 73 Laboratory Quality Right Angle Prisms 73 Equilateral Prisms 74 Wedge Prisms 75 Anamorphic Prism Pair 75 Penta Prisms 76 Dove Prisms
More informationFG-02 FG-02 LR PICTURED
FG-02 Fluid-Gimbal Head FG-02 LR PICTURED FG-02 Fluid-Gimbal Head VERTICAL ARM HORIZONTAL BAR SPECIFICATIONS: FG-02 Load Capacity...50 pounds (23kg) Damped Load Capacity...15 pounds (6.8kg) Pan & Tilt
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationReview of paper Non-image-forming optical components by P. R. Yoder Jr.
Review of paper Non-image-forming optical components by P. R. Yoder Jr. Proc. of SPIE Vol. 0531, Geometrical Optics, ed. Fischer, Price, Smith (Jan 1985) Karlton Crabtree Opti 521 14. November 2007 Introduction:
More informationPRODUCT NEWS. Marshall Electronics. V-ZPL06 / V-ZPL12 / V-ZPL1050 / V-ZPL-214 / V-ZPL-318 High Tech Zoom Pinhole Lenses
Marshall Electronics O P T I C A L S Y S T E M S D I V I S I O N V-ZPL06 / V-ZPL12 / V-ZPL1050 / V-ZPL-214 / V-ZPL-318 High Tech Zoom Pinhole Lenses PRODUCT NEWS Available in 4-20mm Zoom or 10-50mm Zoom
More informationInstruction Manuall. Flowcam Series. Professional dual-arm Camera Stabilizer System 5-15 lbs
Flowcam Series Professional dual-arm Camera Stabilizer System 5-15 lbs Instruction Manuall Please read the instruction manual thoroughly before operating your aviator stabilizer for the first time to avoid
More informationDigiPot Software Configuration Menu
C Option Centers the beam axially with the laser module s housing Available for the following modules: PM, PMT, SPM, & SPMT D Option Settings stored in nonvolatile memory Works with customer-supplied computer
More informationAMG Series. Motorized Position and Rate Gimbals. Continuous 360 rotation of azimuth and elevation including built-in slip ring
AMG Series Optical Mounts AMG Series Motorized Position and Rate Gimbals Continuous rotation of azimuth and elevation including built-in slip ring High accuracy angular position and rate capability Direct-drive
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More informationXSLIDE. XSlide Positioning System. Manual and Motorized. Compact Positioning Stage. Long life, precise movement, greater value
XSlide Positioning System Long life, precise movement, greater value Manual and Motorized Compact Positioning Stage XSLIDE Ideal for limited space applications Velmex Versatility Velmex positioning products
More informationYOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationEPILOG LASER Table Mountain Parkway Golden, Colorado Phone FAX
EPILOG LASER 16371 Table Mountain Parkway Golden, Colorado 80403 Phone 303-277-1188 - FAX 303-277-9669 www.epiloglaser.com Procedure Title: Replacing the Optics in your FiberMark Laser Engraver Tools Needed:
More informationIf you are missing any of the following items, please contact Stanton Video immediately (602)
RIGHT ANGLE FOCUS Jan 03 If you are missing any of the following items, please contact Stanton Video immediately (602) 493-9505 1. Right Angle Focus Servo 2. Servo End Cap 3. Lens Gears (32 pitch, 48 pitch,.6
More informationZero Gravity Rig Operating Instructions
Welcome to our new top-of-the-line shoulder support system for cameras up to 15 lbs - the ZG Rig. In addition to its totally unique vertical balancing mechanism, this system is designed to be configurable
More informationOperating Instructions for FC Adjustable Fiber Optic Adapter
530 Main Street, Acton, MA 01720 Phone: (978)263-3584, Fax: (978)263-5086 Web Site: www.acton-research.com Operating Instructions for FC-446-020 Adjustable Fiber Optic Adapter Ver 2.0 Model FC-446-020
More informationSingle-Axis Lasers for Flatness and Leveling Applications. Laser Systems for Flatness and Leveling L-730/L-740 Series
Single-Axis Lasers for Flatness and Leveling Applications Laser Systems for Flatness and Leveling L-730/L-740 Series Why the L-730/L-740 Flatness Leveling Systems are Better Sooner or later everything
More information4 IMPACT SOCKETS, BITS
IMPACT SOCKETS, BITS IMPACT SOCKETS, ADAPTOS AND SETS PAGE 58 BITS AND ACCESSOY TOOS PAGE 66 IMPACT DIVE AND SET PAGE 7 IMPACT Sockets, Machine actuated IMPACT Sockets, Machine actuated. STAHWIE IMPACT
More informationSetup Information Panosaurus May 3, 2011
Setup Information Panosaurus 2.0 www.gregwired.com May 3, 2011 Please take the time to read all of the setup information to ensure success and ease of use of this tripod head. Much of the setup is a one
More informationMicroscopic Imaging Research Station (MIRS) Assembly Guide. Version 1.0.0
Microscopic Imaging Research Station (MIRS) Assembly Guide www.adsyscontrols.com Adsys Controls, Inc.2012 Version 1.0.0 I. Assembly of the Adsys Controls MIRS system This document explains the assembly
More information