_Dutch _Russian _Polish _Portugal _Arabic. _English _French _Spanish _German _Italian. HDR l HDMI Splitter. User s Manual

Size: px

Start display at page:

Download "_Dutch _Russian _Polish _Portugal _Arabic. _English _French _Spanish _German _Italian. HDR l HDMI Splitter. User s Manual"

Pierce Armstrong
5 years ago
Views:

1 _English _French _Spanish _German _Italian _Dutch _Russian _Polish _Portugal _Arabic HDR l HDMI Splitter User s Manual

Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6.

2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug, a polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety, if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/ accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used. Use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lighting storms or when unused for long periods of time 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. ClassⅠ construction An apparatus with CLASSⅠ construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 3

Disconnection Device Disconnect the main plug from the apparatus, if it s defected.

, it may be used HAR code with fittings of an approved agency is employed.

To reduce the risk of electric shock do not perform any servicing other than that contained in the

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

Digitalzone will not be responsible for any problems caused by using any other adapter we don't

4 Disconnection Device Disconnect the main plug from the apparatus, if it s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code with fittings of an approved agency is employed. CAUTION These servicing instructions are for use By qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on the apparatus. Digitalzone will not be responsible for any problems caused by using any other adapter we don't provide. Where the MAIN plug or an appliance coupler is used as the disconnect device, The disconnect device shall remain readily operable. Listing of manufacturers and models of the relevant power supplies. 1. Dee Van Electronics (Longchan) Co., Ltd 2. DSA-42D

5 User s Manual FCC Information (for U.S.A) Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment under FCC rules. NOTE ON RECYCLING (for EUROPE) This product s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning chemical waste. This product and the accessories packed together constitute the applicable product according to the WEEE directive except batteries 5

6 HDMI Splitter Important safety instructions Please read following recommended safety instructions carefully. Do not place this product on an uneven surface. Do not install on a surface where exposed to direct sunlight, near heating.equipment or heavy cold area. Prevent water or dust from the product. Do not attempt to repair this product yourself. Do not place glass contained of liquid on the product. Do not install this product near any magnetic source. Place the product at proper ventilation area. Do not place heavy items on the product. Copyright 2016, Digitalzone Co., Ltd. All rights reserved. Read these operating instructions carefully before using the product. Follow the safety instructions on the unit and the safety precautions listed in the manual. Keep this manual handy for future reference. 6

7 Contents User s Manual Important Safety Instruction 2 Contents 7 English 8 Control & Connection options 8 Packages and accessories 9 Remote control Unit 10 Insert battery 10 Connection 11 How to use HDMI Splitter 12 Troubleshooting for no power 13 CEC, USB (Firmware upgrade) & RS-232 (Remote Control) 13 Front key Lock / Unlock setting 14 How to update System Firmware 15 How to use EDID Emulation Mode 16 Dynamic mode 16 Static mode 17 Troubleshooting Guide for Splitters 18 Specification 19 Troubleshooting for no power 19 7

8 HDMI Splitter Controls & Connection Options Front Rear (HVS-6208) Rear (HVS-6204) 8

9 User s Manual Packages and accessories Contents are subject to change without prior notice. Additional accessories should be purchased separately. Digitalzone will not be responsible for any problems caused by using any other adopter we don't provide. HDMI cable is optional accessories. Product labels located in the bottom parts of products. 9

10 HDMI Splitter Remote Control Unit It s possible to use a remote controller within 3~5m, 60 degree of angle scope. You can use an extension receiver for a remote controller if it s far away from the system. The receiver in the system will not work when the extension reciever is connected. - Turn the unit off before connecting the extension reciever. Insert battery 1. Pull out the insert part. 2. Insert battery after checking. 3. Push in the insert part. + polarity 10

Connection User s Manual How to connect devices with

Generator, - Output: FHD/UHD TV) You must use High

refresh rate and resolution above 2160p/60Hz.

720p/1080i/1080p/100~120Hz High Refresh Rate) Please

11 Connection User s Manual How to connect devices with splitter (- Input: Blu-ray Player, FHD/UHD Stream Generator, - Output: FHD/UHD TV) You must use High Speed HDMI cable if you like to use Deep Color, High refresh rate and resolution above 2160p/60Hz. (720p/1080i/50~60Hz/Deep Color, 720p/1080i/1080p/100~120Hz High Refresh Rate) Please ask manufacturer or store you purchased, if you need additional HDMI cables for more connection. 11

12 HDMI Splitter How to use HDMI Splitter 1. Power ON splitter. 2. Power on source players to use such as Blu-ray Player or FHD/UHD Set-top box, etc 3. Power on display devices 4. Choose one of the input no. for the source player to use. It s possible to select the input number by touching the number button in the front panel or by pressing the button in the remote control unit. You must connect UHD TV to use HD player supporting 4K. (Blu-ray player) 12

13 User s Manual Troubleshooting for no power - Check if LED light on the front is turned on. - Make sure the power cord connectors on both ends are firmly attached. Please refer to the webpage, for more detailed information for the troubleshooting USB (Firmware upgrade) & RS-232 (Remote Control) USB : You can upgrade firmware by USB easily when new firmware is released.( FAT32 file system is only available in USB) RS-232: RS-232 is capable of external control via serial port provided control protocol by Digitalzone. 13

HDMI Splitter Front key Lock / Unlock setting Lock Lock Unlock Unlock Front Key Lock Unlock Press the selected number in the front (1 or 2) for 2~3 seconds.

14 HDMI Splitter Front key Lock / Unlock setting Lock Lock Unlock Unlock Front Key Lock Unlock Press the selected number in the front (1 or 2) for 2~3 seconds. After pressing F key 3 times, and press all numbering keys (1->3->2->4) in order. IR Remote Lock After pressing F key 3 times, and press input 1 button. Unlock After pressing F key 3 times, and press input 2 button. Note If the front button is locked, - All LEDs for input will be blinking. - All other button including Power will not be working. It is only possible to use the front button to unlock the setting. 14

User s Manual How to update System Firmware Before

Copy Newest firmware into the connected USB Memory. 4.

Safety Remove (Recommended) How to update Firmware 1.

15 User s Manual How to update System Firmware Before updating Firmware 1. Connect a USB to your Computer. 2. Format the USB. USB has to be formatted in FAT32 format (Recommended) 3. Copy Newest firmware into the connected USB Memory. 4. When the copy process is finished, remove the USB by Safety Remove (Recommended) How to update Firmware 1. Power on the HDMI splitter. 2. Insert USB Memory in the rear. 3. Firmware will be updated automatically. 15

16 HDMI Splitter How to use EDID Emulation Mode 1. Dynamic mode Function Number Mode Summary Description F1 Normal Safety configuration Intersection of all those display devices F2 MaxAudio Max audio F3 Copy 1st HDMI Port Video : Intersection of all those display devices Audio: it takes maximum value. Follow EDID information of the display device connected 1 st HDMI output. F4 MaxAll Max all capability Joining EDID information of all those display devices. How to set Dynamic mode. 1. Keep touching F key on front over 2sec. 2. LEDs For FE2 and FE3 are blinking. 3. Select No. 1~4. 4. LED for the selected function (between FE1 ~ FE4) will be turned on and then completed the setting. 16

17 User s Manual 2. Static mode Function Number Mode Summary Description F5 1080i Force 1080i F6 1080p Force 1080p F7 4K Force 4K F8 4K-6G Force 4K-6G Audio : 2Ch, PCM Video : 1080i/50,60Hz Audio : 2Ch, PCM Video : 1080p/50,60Hz Audio : 2Ch, PCM Video : 2160p/30Hz or Equiv Audio : 2Ch, PCM Video : 2160p/60Hz or Equiv How to set Static mode. 1. Double-click F key. 2. LEDs For FE1,FE4 are blinking. 3. Select No. 1~4. 4. No.1->F5 No.2->F6 No.3->F7 No.4->F8 5. LED for the selected function (between FE1 ~ FE4) will be blinking and then completed the setting. - When above functions are selected, FE1~FE4 LED will be ON. - In case of using remote control, select F1~F8 after pressing "F" key. 17

18 HDMI Splitter Troubleshooting Guide for Splitters Please check the following before contacting the Customer Center for service. Status: When the TV screen does not show anything or is blinking Check List Measures Is the product connected to the HDMI Cable properly? 1) Connect the product to the cable correctly. 2) Replace the cable and connect the new one. Is the LED for POWER, SYNC, HDCP, INPUT, FE LED on the front blinking or off? 1) Check if the power adapter is connected properly. 2) Press the Power button on the front. 3) Check if the AC power is connected properly. 4) Replace the adapter. Is the adapter enclosed with the product supplied by DIGITALZONE? Are the video source equipments (Generator and Blu-Ray) turned on? 1) Use an adapter supplied by DIGITALZONE only. 1) Directly connect the video source equipments (Generator and Blu-Ray) to the TV to see if they work normally. Check if you select the right HDMI input number. 1) If the source player is connected HDMI number 1, then select HDMI Input number 1. 2) If the source player is connected HDMI number 2, then select HDMI Input number 2. Are you using UHD TV, Full HD TV and HD TV together? 1) Select F1 (Normal mode) from the EDID Emulation mode, or select one of resolution from the static mode. (Refer to the page 16 for Static mode) When additionally connecting or removing a TV to or from a splitter, the TV screen may blink for a few seconds and then become normal due to the initialization of EDID. (This is not an error but a normal operation.) 18

19 User s Manual Specification Input Output 2EA(Model:HVS-6204 / HVS-6208) 4EA (Model:HVS-6204), 8EA(Model:HVS-6208) User Interface Remote Control RS232 LED Buttons IR Remote PC/ Device POWER : On / Off SYNC : Indication of valid input signal HDCP : HDCP being used (1.4 / 2.2) EDID : Emulation Being used HDR : HDMI Info frame of HDMI outputs being used INPUT : Input selection display Touch sensors POWER : Power ON / OFF Input/function (1~2) selectable. Touch 1~4 after pressing F(Function) Power +12V 3A DC Jack Firmware Upgrade Yes USB memory stick(fat32) HDMI Version 2.0a Up to 4096 x 60Hz (YCbCr / RGB 4:4:4) Up to 18Gbps (6Gbps per channel) HDCP Version 2.2 / 1.4 HDCP 2.2 / 1.4 Support EDID Emulation EDID Emulation Mode Support (Dynamic mode 4type / Static mode 4type) Direct current To indicate on the rating plate that the equipment is suitable for direct current only. To identify relevant terminals. Troubleshooting for no power - Check if LED light on the front is turned on. - Make sure the power cord connectors on both ends are firmly attached. Please refer to the webpage, for more detailed information for the troubleshooting 19

20 HDMI Splitter 20

Always there to help you. Register your product and get support at SPA1330. Question? Contact Philips.

Always there to help you. Register your product and get support at SPA1330. Question? Contact Philips. Always there to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips SPA1330 User manual Contents 1 Important 2 Safety 2 Notice 3 English 2 Your multimedia