Your start into the industrial revolution IO-Link solutions for factory automation

Transcription

1 Your start into the industrial revolution solutions for factory automation

2 ifm offers the widest product portfolio of sensors, masters and software LR DEVICE Parameter setting software via master Finds all in the Ethernet network and creates an overview of the whole plant. Automatic identification of the connected sensors and actuators. Quick and easy parameter setting. Optimum validation via graphic visualisation. Innovative connectors with a high benefit for the customer Material resistance: resistant to oils and coolants. Protection against moisture: optimum sealing even when mounted without tools. Vibration protection: vibration-resistant fitting, mechanical end stop protects O-ring against destruction. EVC M12 standard series: for connecting sensors and actuators. EVC M12 performance series cable: increased cable cross section 4 x 1 mm². Intelligent connection of sensors: 4 and master. 4 ports with full V1.1 functionality, COM1, COM2, COM3 and SIO mode. Master and devices configurable via the LR DEVICE software. 2 Ethernet ports 10/100 Mbits/s with switch for PROFINET, EtherNet/IP, EtherCAT,... SAP ready via IoT Core. Voltage supply via standard sensor cable, M12 A-coded. Simply smart: sensors and modules Digital transmission of measured values for a correct transmission without conversion of analogue signals. More process data and predictive error detection avoid unscheduled downtime. Shorter and trouble-free retro-fitting times for increased machine uptime. Flexible and efficient wiring due to decentralised IO modules.

3 Future-oriented technology meets user-friendly concepts Safety technology from ifm The optimum solution for your application Safety 4.0: the safe SmartPLC Safety at Work is the safety-related extension of your solution. You can integrate all binary safety-related components, e.g. e-stops, safety light grids or protective guard locks etc. with low installation complexity. The fail-safe PLC is integrated into the existing system at the fieldbus level. It is the link between the safe and non-safe plant sections. Respond to changes and extensions in the plant in a quick and flexible way, the safe section remains unaffected by your system. DEVICE QA0011 SMARTOBSERVER 24 V DC fuse DF22xx Y splitter M12 EBC116 Connection cable EVC719 24V DC power supply DN4014 DataLine AL port StandardLine AL1100 StandardLine AL1102 device input module AL2411 input module AL2401 AS-Interface Safety at Work Less wiring less cost. Modular structure and flexible connection technology ensure easy integration into the AS-i system. Select from our extensive range of safety input/output modules, operating elements, safe AS-i door switches or safety rope emergency stop switches. Fail-safe inductive sensors CabinetLine AL1900 Detect metals without contact in a robust and wear-free way. Unlike conventional safety switches, these sensors do not require a special counterpart. Direct detection of metal machine parts. SmartPLC SafeLine AC4xxS device output module 30 AL233 Safe automation system includes PLC and gateway functions. Quick and easy set-up. Flexible and future-proof thanks to connective hardware and CODESYS V3. High machine uptime due to sophisticated diagnostics. Unbeatable price-to-performance ratio. Safe up to SIL 3, PL e. SmartPLC C SafeLine AC4xxS ClassicLine AC50xS ClassicLine AC50xS Safety light curtains and safety light grids. Compact, small and reliable. Easy connection: tried-and-tested M12 connection. The configuration is made via the pin connection, e.g. range or restart. A PC is not required.

4 from ifm Profit from the added value 5-segment signal lamp type DV2500 Different modes configurable via. Reduce the multitude of types and decide on the operating modes during installation: permanently on, low flash rate, high flash rate, different colours etc. inline display type E30430 For the connection between master and sensor up to 4 process values are displayed. More transparency in your plant thanks to the compact display and the clearly visible LEDs. Infrared temperature sensor with type TW2100 Emissivity of the measured object selectable via. Adapt the parameters of the sensor dynamically from the control room. React to changes of production runs or changing operating conditions fast and flexibly without local parameter setting. Distance sensor with type O1D120. Measure distances up to 10 m and transmit them to the control system digitally via. Avoid transmission and conversion losses with trouble-free signal transmission via irrespective of the colour and extremely resistant to extraneous light up to 100 klux. master for control cabinets type AL1900 Separation between automation and IT network. Sensor information is transferred into the IT world via TCP/IP JSON interface completely separated from the automation network. Ultrasonic sensor with type UGT594 Increase your parameter setting options by using, e.g. filter functions for a faster response time, switch-on / switch-off delays, hysteresis, background suppression. Extensive diagnostic functions such as echo quality, operating hours counter. master DataLine type AL1302 The gateway between devices and the fieldbus. The extremely robust housings are resistant to coolant applications or the wet areas in the food industry. Sensor information is transferred into the IT world via TCP/IP JSON interface completely separated from the automation network.

5 Visit our website: Position sensors Identification systems Sensors for motion control Condition monitoring systems Industrial imaging Safety technology Process sensors Industrial communication ifm electronic gmbh Friedrichstraße Essen Tel. +49 / 201 / Fax +49 / 201 / info@ifm.com Systems for mobile machines Connection technology Software Power supplies Accessories WARRANTY years on ifm products ifm article no We reserve the right to make technical alterations without prior notice. Printed in Germany on non-chlorine bleached paper. 11/17