Locus Engineering Inc
|
|
- August Miller
- 5 years ago
- Views:
Transcription
1 Locus Engineering Inc PS/2 Keyboard to ASCII Converter PS/2 Keyboard PS/2 to ACII Converter Host Microcontroller FEATURES Decodes PS/2 Scanset 2 keystrokes to a single ASCII byte on make Offload process intensive PS/2 keyboard decoding Unique single byte codes for non-ascii keys including multi-media keys Simple interface between PS/2 keyboard and any host microcontroller Selectable 57.6 & 5.2 KBaud serial data output 00 KHz clocked serial data output Ctrl-Alt-Del reset & Escape key reset outputs Interrupt and LED flash output 3.3V 20mA regulated output Low cost Upgrade from E5B/D versions APPLICATIONS Enhance microcontroller applications with keyboard data Process control Robotics control DESCRIPTION The PS/2 Keyboard to ASCII Converter module allows a microcontroller application to be enhanced with keyboard numeric and text data without having to handle the tedious scancode detection and decoding process. This module receives the complex scancode sequence for each keystroke on the make, and decodes it to a unique ASCII byte which is easier to use by a host application. This frees up the host microcontroller considerably since it does not have to wait for each bit to be determined, then for each scancode byte to be saved, and finally for the variable length byte sequence to be decoded. As the module is dedicated to the task and provides a single decoded byte corresponding to the keystroke, the host can concentrate on its own application while being interrupted only when necessary. Non-ASCII keys are also decoded to a unique code. The module provides both serial data and clocked serial data at ~00 KHz. An interrupt signal and a LED flash output are also provided. Pressing Ctrl-Alt- Del generates a one second reset output while pressing the Escape key generates a separate 8msec reset output. The module only requires +5.0V and a connection to the host. The outputs are compatible with 3.3V and 5.0V TTL-compatible inputs. The module is available in a 2 pin DIP package with integrated PS/2 connector. May 0, 207
2 Electrical and Mechanical Specifications Table. Absolute Maximum Ratings Parameter V dd to GND Digital input voltage to GND Digital output voltage to GND Operating temperature range Storage temperature range Maximum output current through port pin Rating -0.3 to +6.5V -0.3 to +5.8V -0.3 to +5.8V -40 to +85 C -65 to +50 C 00mA Table 2. Electrical Characteristics Test Conditions: Supply Voltage V dd = +5.0V, T ambient = 25 C, unless otherwise specified Symbol Parameter Min. Typ. Max. Unit V dd Supply voltage V I dd Supply current ma V IH Digital high input voltage 2.5V V V IL Digital low input voltage 0.6 V V OH Digital high output voltage -0mA V OL Digital low output voltage 0µA -3mA 0mA 25mA T operate Operating temperature C T response Response time ~5 µsec Output baud rate KBaud Output clocked data rate 95 ~00 05 Kbps V V General Precautions Charged devices and circuit boards can discharge without warning. Proper ESD precautions should be followed to avoid failure. This device is not authorized for use in any product where the failure or malfunction of the product can reasonably be expected to cause failure in a life support system or to significantly affect its operation. Locus Engineering Inc. reserves the right to make changes at any time without notice to improve product features or reliability. Information is provided by Locus Engineering Inc. with the best of intentions without any warranty expressed or implied. As such Locus Engineering Inc. disclaims all liabilities or responsibilities for any use of the information, any inaccuracies or fitness for a particular purpose. May 0,
3 Electrical and Mechanical Specifications Table 3. Pin Descriptions Pin# Name Function NT Interrupt output, ~50 usec active low pulse before and 0 usec after clocked serial data SD 2 LD LED flash output, ~8msec active low pulse 3 TX Serial data output 57.6 to 5.2 Kbaud 4 B Baud rate select, 0=57.6K, =5.2K 5 RI Reset input, ~30usec minimum active low pulse 6 B0 Escape key reset output, ~8 msec active low pulse 7 RO Ctrl-Alt-Del reset output, ~ second active low pulse 8 SC Serial clock output, ~00KHz 9 SD Clocked serial data output, ~00KHz 0 3V +3.3V regulator output, ~20mA for external devices 0V Ground 2 5V +5.0V input to +3.3V regulator input and to PS/2 keyboard connector NT LD 2 TX 3 B 4 RI 5 B V 0V 0 3V 9 SD 8 SC 7 RO Figure. Pinout Diagram May 0,
4 Electrical and Mechanical Specifications.50" 0.500" 0.675" 0.2" 0.500" 0.500" 0.50" 0.687" 0.250" 0.025"x0.025"SQR Figure 2. Module PCB Dimensions May 0,
5 PS/2 KEYBOARD +5V MODULE 2 5V 3V V 20mA max to external devices POWER 0V LED 2 PS/2 INT SDAT SCLK 9 8 CLOCKED DATA PORT Baud Rate =5.2K 0=57.6K 4 B TXD 3 SERIAL PORT RO 7 CTRL-ALT-DEL RESET OUT +5.0V +3.3V 0K 0 5 RI B0 6 ESCAPE KEY RESET OUT 0.uF RESET IN (OPTIONAL) Figure 3. General Application Circuit E5B/D Compatibility The is an upgrade to the original E5B and E5D versions. The module size and pinout are identical to the E5B except for two extra pins providing the added functionality of Ctrl-Alt-Del reset output and <Escape> key reset output. Power Supply The module requires +5.0V to operate the module and power the PS/2 keyboard. The module consumes approximately 4 ma worst case with a keyboard connected; the keyboard supply current is additional and can be up to 200mA. Digital I/O The digital input/output pins are TTL compatible. Inputs have internal pullups and can be grounded or left floating for logic 0 or logic levels respectively. Outputs are push-pull with 0 to +3.3V voltage swings. Reset In The power-on reset circuitry is self-contained within the module. A reset pin is provided however it is not needed unless the power supply ramp is slower than msec. The optional reset source can be from a microcontroller pin or an RC combination. The reset input needs to be an active low pulse at least 30usec duration. Typical RC values are 0K and 0.uF respectively. For most applications, it can be left unconnected. May 0,
6 Serial Data Port The serial port baud rate is selected using the B pin between 57.6K (B=0) and 5.2K (B=). The TX pin is a single line connection to the host microcontroller's RX pin. Clocked Data Port The clocked data port is a three line connection to the host microcontroller which includes an interrupt pulse, serial data, and an active low ~00KHz clock pulse train. A single byte is sent to the serial port and then to the clocked data port on the make of every keystroke. A serial to parallel shift register can be used to capture the clocked data from the. The interrupt (NT) signal can also be used to indicate that the data has finished being loaded into the shift register. Each clocked serial data bit time is approximately 0 usec. The data is output with the most significant bit first and the output is inverted. Note that either the rising or the falling edge of the SCLK can be used to clock the SDAT into a shift register as the SCLK edges are 3.3 usec inside the bit period. Interrupt Output The interrupt (NT pin) output is asserted 50 µsec in advance and held low until 0 µsec after the clocked serial data has been sent. This allows a host time to setup and receive the serial clock and data. LED Flash Output An onboard LED flashes for 8 msec following the termination of the interrupt signal. The L.Ctrl-L.Alt-Del sequence flashes the LED for one second. Reset Outputs Pressing the L.Ctrl-L.Alt-Del in sequence generates a one second active low reset output as well as sending 0xF0 to the serial port and to the clocked data port. This allows the keyboard to provide a hard reset to the host microcontroller. The <Escape> key is also decoded to provide a ~8 msec active low reset output to an interrupt pin as an alternative signal to a hard reset. The active low pulse timing occurs at the same time as the LED active low pulse. May 0,
7 Module Operation On power up or external reset, the clears the clocked serial data byte, and then waits for keyboard scancodes which are produced on both the make and the break of keyboard keys. Following the make of a keyboard key, the parses the keyboard scancodes as they are received so that the corresponding ASCII code is produced as quickly as possible. Typical response times are within 5 microseconds after the last bit of the last scancode for a keystroke is received. Note that ASCII codes are produced by the only on the make, i.e. when the key is pressed. No ASCII codes are produced for the scancodes produced on the release of the key. The decodes the unshifted and shifted keys using the state of the Shift key or CapsLock key. Other control keys such as Alt, Ctrl, NumLock, and ScrollLock have no effect on the keys although outputs are produced. The CapsLock, NumLock, and ScrollLock toggle their respective indicators on the keyboard. While the CapsLock key produces no output, the NumLock and ScrollLock keys produce outputs which toggle between two values. All the non-ascii keys on the PS/2 keyboard also produce unique codes. The allows typematic functionality where ASCII codes are repeated at a 0Hz rate when a key is held down for more than a second. The only exception to the typematic functionality is the Pause/Break key which only puts out one ASCII code when the key is held down. The provides several outputs following a keyboard key closure. The output timing is shown in Figure 4. The first sends an ASCII code through the serial port at the selected data rate using one start bit, 8 data bits, no parity, and one stop bit (8N format). The interrupt pin (NT) is brought low 50 µsec prior to the clocked data to allow the host microcontroller time to service the interrupt. The clocked data is sent at approximately 00KHz. The NT pin is held low until 0 µsec after the end of the clocked data transmission. Once the NT pin is deasserted, the LED line is pulsed low for 8 msec. The keyboard is inhibited until all outputs are completed. May 0,
8 8msec TXD S D0 D D2 D3 D4 D5 D6 D7 S 80usec SD SERIAL DATA D7 D6 D5 D4 D3 D2 D D0 SC SERIAL CLOCK 50 usec 3 x 3.3 usec 0 usec NT INTERRUPT* LD LED* B0 ESCAPE* Figure 4. Signal Output Timing May 0,
9 8msec 0xC3 0xC3 DEL L.ALT DEL 0x80 0xF0 0x80 0xF0 8msec 8msec second second Figure 5. Ctrl-Alt-Del Reset Output Timing 0x8 0x8 KEY L.CTRL ASCII OUT CLK DATA OUT INTERRUPT OUT LED OUT RESET OUT May 0,
10 SERIAL DATA INTERFACE The simplest protocol is a serial data transfer using the host s UART in which case only TX is used. A typical interface to a microcontroller is shown below. PS/2 KEYBOARD MICROCONTROLLER +5V MODULE POWER 2 5V 0V 3V LED V 20mA max to external devices Baud Rate PS/2 INT SDAT SCLK 9 8 CLOCKED DATA PORT =5.2K 0=57.6K 4 B TXD 3 SERIAL PORT RXD RO 7 CTRL-ALT-DEL RESET OUT RESET +5.0V +3.3V 0K 0 5 RI B0 6 ESCAPE KEY RESET OUT INTERRUPT 0.uF RESET IN (OPTIONAL) Figure 6. Serial Interface to Microcontroller Data is output with the least significant bit first. The baud rate is selectable between 57.6 and 5.2 Kbaud using the B input. The serial data can be converted to bipolar RS-232 levels using a MAX232 type chip or equivalent for connection to a PC. May 0,
11 CLOCKED SERIAL DATA INTERFACE TO MICROCONTROLLER If a UART is not available on the microcontroller, data can be received using the serial data, serial clock, and interrupt signals. The INT* signal can be used as an interrupt to the microcontroller whose falling edge occurs 50 usec prior to the first data bit. This delay allows the microcontroller to save any work in progress before reading the data. The microcontroller can read the serial data whenever the serial clock level is low, or use either clock edge to read the serial data bits which are sent most-significant-bit first. PS/2 KEYBOARD MICROCONTROLLER +5V MODULE POWER 2 5V 0V 3V LED V 20mA max to external devices Baud Rate PS/2 INT SDAT SCLK 9 8 PORT PIN PORT PIN PORT PIN =5.2K 0=57.6K 4 B TXD 3 RO 7 CTRL-ALT-DEL RESET OUT RESET +5.0V +3.3V 0K 0 5 RI B0 6 ESCAPE KEY RESET OUT INTERRUPT 0.uF RESET IN (OPTIONAL) Figure 7. Clocked Data Interface to Microcontroller May 0, 207
12 CLOCKED SERIAL DATA INTERFACE TO SHIFT REGISTER A shift register can also be used to capture the ASCII byte from the clocked serial data port. The following circuit illustrates the clocked data capture using a 74LV64 shift register. The 'LV series has TTL compatible inputs and rail to rail outputs while operating between 2.0V and 6.0V, so compatibility is maintained regardless of the shift registers' supply voltage. +5V PS/2 KEYBOARD +5V MODULE POWER 2 5V 0V 3V LED V 20mA max to external devices LV64 VCC MR 3 Q7 2 Q6 +5V +5.0V +3.3V Baud Rate =5.2K 0=57.6K 0K 0 PS/2 4 5 B RI INT SDAT SCLK TXD RO B A B CLK GND Q5 Q4 Q3 Q2 Q Q uF RESET IN (OPTIONAL) Figure 8. Clocked Data Interface to Shift Register KEYBOARD CODE CORRESPONDENCES The produces ASCII codes for all standard ASCII keys and unique single byte codes for the non-ascii keys as shown in the folowing tables. It should be noted that there are variations between keyboard manufacturers for the scancodes produced, especially for the multi-media keys so care is needed in selecting the same keyboard for a particular application. The output produced by the represent the most common codes from keyboards. Where there are differences between keyboard models, the codes remain unique for the same model of keyboard keys. On the main keyboard, the CAPS-Lock and SHIFT keys only modify keys with upper and lower case characters. The CAPS-Lock key also toggles its LED. The CTRL, GUI, ALT, and APP each produce unique non-ascii codes. Figure 9 indicates the code correspondences for the various keys. The extended keypad code correspondences are indicated in Figure 0. Note that the SCRL- Lock and NUM-Lock codes toggle between two values depending on the the state of the associated LED. Apart from the keypad arithmetic operators which have codes identical to the keys on the main keyboard, all other keys have unique non-ascii codes. The multi-media keypad code correspondences are all unique non-ascii codes and are indicated in Figure. May 0,
13 May 0, Figure 9. Main Keyboard ASCII Code Correspondences E 8 } ] 5D 7D ENTER 0D SHFT FD APP GUI CTRL GUI CTRL 20 SPACE ALT SHFT CAPS 09 TAB { [ 5B 7B P O 4F 6F I U Y T R E W Q 5 7 FB F F2 FC F0 FA F9 F9 F8 F8 F7 F7 F6 F6 F5 F5 F4 F4 F3 F3 F2 F2 F F ESC B ALT / 3F 2F. 3E 2E, 3C 2C M 4D 6D N 4E 6E B V C X Z 5A 7A " ' : ; 3A 3B L 4C 6C K 4B 6B J 4A 6A H G F D S A 4 6 ` <- 08 \ 7C 5C + = 2B 3D _ - 5F 2D ) ( * 8 2A 38 & ^ 6 5E 36 % $ # ! 2 3
14 PRNT FD SCRL 84/85 PBRK FE NUM 82/83 / 2F * 2A - 2D INS HOME PGUP C0 C C2 D7 D8 D9 + DEL END PGDN C3 C4 C5 D4 D5 D6 2B 2 3 DB DA DC DD D D2 D3 0 D0. DE ENT 0D Figure 0. Extended Keyboard Code Correspondences POWER 9F SLEEP A3 WAKE AF MY COMPUTER A4 CALCULATOR 95 MEDIA SELECT AB NEXT TRACK AA PREVIOUS TRACK D0 STOP A2 PLAY/ PAUSE 9E MUTE D0 VOLUME UP D0 VOLUME DOWN D0 A8 WWW HOME A WWW 8A WWW 86 WWW A0 WWW 9A WWW 94 FAVORITES SEARCH BACK FORWARD STOP WWW 8F REFRESH Figure. Multi-Media Keyboard Code Correspondences May 0,
PAK-VIa PS/2 Coprocessor Data Sheet by AWC
PAK-VIa PS/2 Coprocessor Data Sheet 1999-2003 by AWC AWC 310 Ivy Glen League City, TX 77573 (281) 334-4341 http://www.al-williams.com/awce.htm V1.5 30 Aug 2003 Table of Contents Overview...1 If You Need
More informationUSB-ASC232. ASCII RS-232 Controlled USB Keyboard and Mouse Cable. User Manual
USB-ASC232 ASCII RS-232 Controlled USB Keyboard and Mouse Cable User Manual Thank you for purchasing the model USB-ASC232 Cable HAGSTROM ELECTRONICS, INC. is pleased that you have selected this product
More informationPreliminary. PACKAGE - 28-pin MLP (5mm X 5mm) Example Circuit Diagram CP V. 48MHz Oscillator. USB Function Controller 512B EEPROM
Preliminary Single-Chip USB to UART Bridge SINGLE-CHIP USB to UART DATA TRANSFER - Integrated USB Transceiver; No External Resistors Required - Integrated Clock; No External Crystal Required - Integrated
More informationSH1030 Rev Introduction. Ultra low power DASH7 Arduino Shield Modem. Applications. Description. 868 MHz. Features
SH1030 Rev. 1.2 Applications Wireless sensor network Data acquisition equipment Security systems Industrial monitor and control Internet of things (IoT) Ultra low power DASH7 Arduino Shield Modem 868 MHz
More informationWM1030 Rev Introduction. Ultra low power DASH7 Modem. Applications. Description. 868 / 915 MHz. Features. WIZZILAB Technical datasheet 1/10
WM1030 Rev. 1.2 Applications Wireless sensor network Data acquisition equipment Security systems Industrial monitor and control Internet of things (IoT) Ultra low power DASH7 Modem 868 / 915 MHz 1 Introduction
More informationKE72 and KE72-T PC Keyboard Encoder User Manual
KE72 and KE72-T PC Keyboard Encoder User Manual Thank you for purchasing the model KE72 Keyboard Encoder. HAGSTROM ELECTRONICS, INC. is pleased that you have selected this product for your application.
More informationMIC826. General Description. Features. Applications. Typical Application
Voltage Supervisor with Watchdog Timer, Manual Reset, and Dual Outputs In 1.6mm x 1.6mm TDFN General Description The is a low-current, ultra-small, voltage supervisor with manual reset input, watchdog
More informationPS232. RS-232 to PS/2 Keyboard Port Adapter Part # SA0009 (Version 4.0) Copyright 2003 L3 Systems, Inc. Redmond
PS232 RS-232 to PS/2 Keyboard Port Adapter Part # SA0009 (Version 4.0) Copyright 2003 L3 Systems, Inc. Redmond Quick Reference Command Description Pg ~H Help Screen Displays short command reference 4 ~V
More informationBT-22 Product Specification
BT-22 Product Specification Features Amp ed RF, Inc. Description 10.4 mm x 13.5 mm Our micro-sized Bluetooth module is the smallest form factor available providing a complete RF platform. The BT-22 is
More informationISDN OEM1. DesignGuide V1.2
ISDN OEM1 DesignGuide V1.2 Content ISDN OEM1...1 1 Objective...3 2 Product description...3 3 Software interfaces...4 3.1 Dialing procedures...4 3.2 AT commands...4 3.2.1 Configuration commands...4 3.2.2
More informationProduct Specification
Product Specification Features Amp ed RF, Inc. Description 15mm x 27mm The added class 1 power, +18dBm, of the BT-11, gives this module one of the best ranges in the industry. It s completely pin compatible
More informationDebounced 8 8 Key-Scan Controller
Debounced 8 8 Key-Scan Controller Description The SN7326 is a 64 key, key-scan controller. It offloads the burden of keyboard scanning from the host processor. The SN7326 supports keypad matrix of up to
More informationIS31BL3231. FLASH LED DRIVER July 2015
FLASH LED DRIVER July 2015 GENERAL DESCRIPTION The IS31BL3231 is a current-regulated charge pump and ideal for powering high brightness LEDs for camera flash and torch applications. The charge pump can
More informationPAK-XI PS/2 Coprocessor Data Sheet by AWC
PAK-XI PS/2 Coprocessor Data Sheet 1999-2003 by AWC AWC 310 Ivy Glen League City, TX 77573 (281) 334-4341 http://www.al-williams.com/awce.htm V1.0 30 Oct 2003 Table of Contents Overview...1 If You Need
More informationILI2312. ILI2312 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.03.
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.03 Date: 2015/11/17 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C. Tel.886-3-5600099;
More informationLPM355X USB to Serial Converter
to Serial Converter Doc. Rev.0 (31/07/12) Features All-In-One to Serial Converter. 2.0 Full Speed compatible. Wide serial lines voltage range 2.7V to 5.5V. Baudrate up to 921.6Kbps. No external components
More informationDS1306. Serial Alarm Real Time Clock (RTC)
www.dalsemi.com FEATURES Real time clock counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap year compensation valid up to 2100 96-byte nonvolatile RAM for data
More informationAPPLICATION NOTE VACUUM FLUORESCENT DISPLAY MODULE
AN-E-321 APPLICATION NOTE VACUUM FLUORESCENT DISPLAY MODULE GRAPIC DISPLAY MODULE GP1118A1A GENERAL DESCRIPTION FUTABA GP1118A1A is a graphic display module using a FUTABA 128 64 VFD. It consists of a
More information+5V Powered Multi-Channel RS-232 Drivers/Receivers
SP238A 5V Powered Multi-Channel RS-232 Drivers/Receivers Operates from a Single 5V Power Supply Meets All RS-232D and V.28 Specifications ±30V Receiver Input Levels Low Power CMOS Operation Operates with
More informationMarch 21, BT22 Datasheet. Amp ed RF Technology, Co., Ltd.
March 21, 2011 BT22 Datasheet Amp ed RF Technology, Co., Ltd. BT22 Features Bluetooth features Bluetooth qualified Bluetooth v2.1+edr Class 2 radio Range up to 30m LOS Description 10.4 mm x 13.5 mm Our
More informationDS1238A MicroManager PIN ASSIGNMENT PIN DESCRIPTION V BAT V CCO V CC
MicroManager www.dalsemi.com FEATURES Holds microprocessor in check during power transients Halts and restarts an out-of-control microprocessor Warns microprocessor of an impending power failure Converts
More informationFeatures. Applications
Push-Button Reset IC with Voltage Supervisor General Description The are low-current, ultra-small, pushbutton supervisor reset ICs with an integrated supply voltage monitor. The device features two manual
More informationCS 380 Lab 4 Keyboard Input Assigned 2/11/10 30 Points
CS 380 ab 4 Keyboard Input Assigned 2/11/10 30 Points In this lab we will see how a kernel can get data from the keyboard. We will adapt code to allow us to perform a number of important operations. Part
More informationFeatures. Applications
Push-Button Reset IC General Description The are low-current, ultra-small, pushbutton reset supervisors with long set-up delays. The devices feature two manual reset inputs and two reset outputs. The devices
More informationApplications Computer Mice for Desktop PCs, Workstations and Portable Computers Integrated Input Devices
Solid-State Optical Mouse Sensor with PS/2 and Quadrature Outputs Technical Data HDNS-2000 Features Optical Navigation Technology Superior precision and smooth navigation optimized for desktop and portable
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. APPLICATION NOTE A V A I L A B L E AN61 16K X25160 2K x 8 Bit SPI Serial
More informationTelecommunications Equipment Test Equipment. Description
Eight Character 5 mm and 7 mm Smart Alphanumeric Displays Technical Data HDSP-210X Series HDSP-211X Series HDSP-250X Series Features X Stackable (HDSP-21XX) XY Stackable (HDSP-250X) 128 Character ASCII
More informationI/O 0 I/O 7 WE CE 2 OE CE 1 A17 A18
2M x 8 Static RAM Features High speed t AA = 8, 10, 12 ns Low active power 1080 mw (max.) Operating voltages of 3.3 ± 0.3V 2.0V data retention Automatic power-down when deselected TTL-compatible inputs
More informationGenesys Logic, Inc. GL827L. USB 2.0 Single Slot SD/MMC/MS Card Reader Controller. Datasheet
Genesys Logic, Inc. GL827L USB 2.0 Single Slot SD/MMC/MS Card Reader Controller Datasheet Revision 1.03 Oct. 17, 2008 Copyright: Copyright 2008 Genesys Logic Incorporated. All rights reserved. No part
More informationFM24CL04 4Kb FRAM Serial Memory
4Kb FRAM Serial Memory Features 4K bit Ferroelectric Nonvolatile RAM Organized as 512 x 8 bits Unlimited Read/Writes 45 Year Data Retention NoDelay Writes Advanced High-Reliability Ferroelectric Process
More informationCAT28C K-Bit Parallel EEPROM
256K-Bit Parallel EEPROM HALOGENFREE LEAD TM FREE FEATURES Fast read access times: 120/150ns Low power CMOS dissipation: Active: 25 ma max Standby: 150 µa max Simple write operation: On-chip address and
More informationS-2900A. Rev.1.1. CMOS 512-bit SERIAL E 2 PROM
Rev.1.1 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially. It
More informationILI2511. ILI2511 Single Chip Capacitive Touch Sensor Controller. Specification ILI TECHNOLOGY CORP. Version: V1.4. Date: 2018/7/5
Single Chip Capacitive Touch Sensor Controller Specification Version: V1.4 Date: 2018/7/5 ILI TECHNOLOGY CORP. 8F., No.1, Taiyuan 2 nd St., Zhubei City, Hsinchu County 302, Taiwan (R.O.C.) Tel.886-3-5600099;
More informationPT7M Ultra Low Voltage Detectors
Features Factory-Set Reset Threshold Voltages for Nominal Supplies from 1.2V to 1.8V Low power consumption : Typ 7.5μA Five different timeout periods available: 70μs(voltage detector), 1.5ms, 30ms, 210ms
More informationINTEGRATED CIRCUITS. PCA bit I 2 C and SMBus I/O port with interrupt. Product data sheet Supersedes data of 2004 Jul 27.
INTEGRATED CIRCUITS Supersedes data of 2004 Jul 27 2004 Sep 30 DESCRIPTION The is a 24-pin CMOS device that provide 16 bits of General Purpose parallel Input/Output (GPIO) expansion for I 2 C/SMBus applications
More informationC1098 JPEG Module User Manual
C1098 JPEG Module User Manual General Description C1098 is VGA camera module performs as a JPEG compressed still camera that can be attached to a wireless or PDA host. Users can send out a snapshot command
More informationPI4IOE5V bit I 2 C-bus and SMBus low power I/O port with interrupt and reset
Features Operation power supply voltage from 2.3V to 5.5V 2-bit I 2 C-bus GPIO with interrupt and reset 5V tolerant I/Os Active Low interrupt output Active Low reset input Polarity inversion register Low
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 16,384-BIT EPROM WITH I/O! 2048 Words x 8 Bits! Single + 5V Power Supply
More informationATF20V8B. High Performance Flash PLD. Features. Block Diagram. Pin Configurations
Features Industry Standard Architecture Emulates Many 24-Pin PALs Low Cost Easy-to-Use Software Tools High Speed Electrically Erasable Programmable Logic Devices 7.5 ns Maximum Pin-to-Pin Delay Several
More informationMIC2782. General Description. Features. Applications. Typical Application. Dual-Input Push Button Reset IC with Immediate and Delayed Outputs
Dual-Input Push Button Reset IC with Immediate and Delayed Outputs General Description The is a two input, two output push button reset IC. It will generate a reset pulse for a factory programmed reset
More informationHigh- Performance Flash PLD ATF16V8B. Features. Block Diagram. Pin Configurations
Features Industry Standard Architecture Emulates Many 20-Pin PALs Low Cost Easy-to-Use Software Tools High-Speed Electrically Erasable Programmable Logic Devices 7.5 ns Maximum Pin-to-Pin Delay Several
More informationAT49BV004(T) TSOP Top View Type 1 1. AT49BV4096A(T) TSOP Top View Type 1 A16 BYTE GND I/O7 I/O14 I/O6 I/O13 I/O5 I/O12 I/O4 VCC I/O11 I/O3 I/O10 I/O2
Features 2.7V to 3.6V Read/Write Operation Fast Read Access Time - 120 ns Internal Erase/Program Control Sector Architecture One 8K Words (16K bytes) Boot Block with Programming Lockout Two 4K Words (8K
More informationVBattery 7 VCC V DD IRLED IS31SE5001 SDA SCL INTB SDB. Figure 1 Typical Application Circuit
IR SENSOR FOR TOUCHLESS PROXIMITY July 2013 GENERAL DESCRIPTION The IS31SE5001 is a low-power, reflectance-based infrared light sensor with advanced signal processing and digital output. The sensor can
More informationSP233A,SP310A and SP312A
SP233A,SP310A and SP312A Enhanced RS-232 Line Drivers/Receivers FEATURES Operates from a Single 5V Power Supply Meets all RS-232F and ITU V.28 Specifications Operates with 0.1μF Ceramic Capacitors No External
More informationDual Interface LCD Display Controller
Dual Interface LCD Display & Keypad Controller Product specification Nov 2013 V0.a ByVac Page 1 of 11 Contents 1. Introduction... 3 2. Features... 3 3. BV4618, Comparison... 3 3.1.1. BV4618... 3 3.1.2....
More informationProduct Specification
Product Specification 15mm x 27mm Description One of the most capable Bluetooth modules available, the BT-21 Bluetooth OEM Module is designed for maximum flexibility. The BT-21 module includes 14 general
More informationTTP226. Preliminary 8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION
8 KEYS TOUCH PAD DETECTOR IC GENERAL DESCRIPTION The TTP222 is a touch pad detector IC which offers 8 touch keys. The touching detection IC is designed for replacing traditional direct button key with
More information24C08/24C16. Two-Wire Serial EEPROM. Preliminary datasheet 8K (1024 X 8)/16K (2048 X 8) General Description. Pin Configuration
Two-Wire Serial EEPROM Preliminary datasheet 8K (1024 X 8)/16K (2048 X 8) Low-voltage Operation 1.8 (VCC = 1.8V to 5.5V) Operating Ambient Temperature: -40 C to +85 C Internally Organized 1024 X 8 (8K),
More informationIC232 PC- CARD USER S GUIDE
ELAN DIGITAL SYSTEMS LTD. LITTLE PARK FARM ROAD, SEGENSWORTH WEST, FAREHAM, HANTS. PO15 5SJ. TEL: (44) (0)1489 579799 FAX: (44) (0)1489 577516 e-mail: support@pccard.co.uk website: http://www.pccard.co.uk
More informationCAT28C17A 16K-Bit CMOS PARALLEL EEPROM
16K-Bit CMOS PARALLEL EEPROM HALOGENFREE LEAD TM FREE FEATURES Fast Read Access Times: 200 ns Low Power CMOS Dissipation: Active: 25 ma Max. Standby: 100 µa Max. Simple Write Operation: On-Chip Address
More information1-Megabit (128K x 8) 5-volt Only Flash Memory AT29C010A. Features. Description. Pin Configurations
Features Fast Read Access Time - 70 ns 5-Volt Only Reprogramming Sector Program Operation Single Cycle Reprogram (Erase and Program) 1024 Sectors (128 bytes/sector) Internal Address and Data Latches for
More informationVGA Port Companion Circuit
GA Port Companion Circuit Features Single chip solution for the GA port interface Includes ESD protection, level shifting, and RGB termination Seven channels of ESD protection for all GA port connector
More informationCAT25C02/04/08/16/32 2K/4K/8K/16K/32K SPI Serial CMOS E 2 PROM FEATURES
K/K/8K/6K/K SPI Serial CMOS E PROM FEATURES 0 MHz SPI Compatible.8 to 6.0 Volt Operation Hardware and Software Protection Zero Standby Current Low Power CMOS Technology SPI Modes (0,0 &,) Commercial, Industrial
More informationDescription. Features. Pin Configuration PI4IOE5V9539
16-bit I 2 C-bus and SMBus low power I/O port with interrupt and reset Features Operation power supply voltage from 2.3V to 5.5V 16-bit I 2 C-bus GPIO with interrupt and reset 5V tolerant I/Os Polarity
More informationKB232. PS/2 Keyboard RS-232 Adapter Part # SA0008 (Version 3.0) Copyright 2003 L3 Systems, Inc. Redmond
KB232 PS/2 Keyboard RS-232 Adapter Part # SA0008 (Version 3.0) Copyright 2003 L3 Systems, Inc. Redmond Command C Displays Configuration String CW= D Lkk=aa,bb P E H V T Quick Reference Notes Field
More information64-Kbit (8K 8) SPI nvsram
64-Kbit (8K 8) SPI nvsram 64-Kbit (8K 8) SPI nvsram Features 64-Kbit nonvolatile static random access memory (nvsram) internally organized as 8K 8 STORE to QuantumTrap nonvolatile elements initiated automatically
More informationINTEGRATED CIRCUITS. PCA bit I 2 C and SMBus I/0 port with reset. Product data Supersedes data of 2002 May Dec 13
INTEGRATED CIRCUITS Supersedes data of 2002 May 13 2002 Dec 13 Philips Semiconductors FEATURES Lower voltage, higher performance migration path for the PCA9556 8 general purpose input/output expander/collector
More informationNTI. KEEMUX Series. KEEMUX-P2 (2-Port PS/2 KVM Switch) INSTALLATION / USER GUIDE R NETWORK TECHNOLOGIES INCORPORATED
NTI R NETWORK TECHNOLOGIES INCORPORATED 1275 Danner Dr Aurora, OH 44202 Tel:330-562-7070 Fax:330-562-1999 www.nti1.com KEEMUX-P2 (2-Port PS/2 KVM Switch) INSTALLATION / USER GUIDE KEEMUX Series MAN049
More informationFeatures. LOAD SWITCH or PMIC. LOAD SWITCH or PMIC /RESET
Dual-Input Push Button Reset IC with Immediate and Delayed Outputs General Description The is a two input, two output push-button reset IC. It will generate a reset pulse for a factory-programmed reset
More informationELAN DIGITAL SYSTEMS LTD. SL332 PC- CARD USER S GUIDE
ELAN DIGITAL SYSTEMS LTD. LITTLE PARK FARM ROAD, SEGENSWORTH WEST, FAREHAM, HANTS. PO15 5SJ. TEL: (44) (0)1489 579799 FAX: (44) (0)1489 577516 e-mail: support@pccard.co.uk website: http://www.pccard.co.uk
More informationKeyboards. The PS/2 Protocol
Keyboards The PS/2 Protocol Debugging Always start from a known working state; stop in a working state. If it breaks, what changed? Take a simple small step, check it carefully, then take another small
More informationDocument: Datasheet Date: 22-Mar-11 Model #: 3679 Product s Page:
Email: info@sunrom.com Visit us at http://www.sunrom.com Document: Datasheet Date: -Mar- Model #: 79 Product s Page: www.sunrom.com/p-0.html ST79 - Infrared remote control decoder NEC The main function
More informationELAN DIGITAL SYSTEMS LTD. CF428 COMPACT FLASH CF+ CARD USER S GUIDE
ELAN DIGITAL SYSTEMS LTD. LITTLE PARK FARM ROAD, SEGENSWORTH WEST, FAREHAM, HANTS. PO15 5SJ. TEL: (44) (0)1489 579799 FAX: (44) (0)1489 577516 e-mail: support@pccard.co.uk website: http://www.pccard.co.uk
More informationSupplement for module D041 incl. ATMega8 Prozessor
Supplement for module D041 incl. ATMega8 Prozessor V 1.4 16. March 2006 2006 by Peter Küsters This document is in copyright protected. It is not permitted to change any part of it. It is not permitted
More informationPK2200 Series. Features. C-Programmable Controller. Specifications Board Size Enclosure Size Operating Temp.
C-Programmable Controller P00 Series The P00 Series of C-programmable controllers is based on the Zilog Z80 microprocessor. The P00 includes digital, serial, and high-current switching interfaces. The
More informationBT 31 Data Sheet. Amp ed RF Technology Inc.
BT 31 Data Sheet Amp ed RF Technology Inc. Product Specification BT31 Features Bluetooth features FCC&Bluetooth licensed radio Bluetooth v3.0 Class 1 radio Range up to 100m LOS 1.5Mbps data throughput
More informationFXL6408 Fully Configurable 8-Bit I 2 C-Controlled GPIO Expander
October 2012 FXL6408 Fully Configurable 8-Bit I 2 C-Controlled GPIO Expander Features 4X Expansion of Connected Processor I/O Ports Fully Integrated I 2 C Slave 8 Independently Configurable I/O Ports Low-Power
More informationPreliminary Data MOS IC. Type Ordering Code Package SDA Q67100-H5096 P-DIP-8-1
Nonvolatile Memory 4-Kbit E 2 PROM with I 2 C Bus Interface SDA 2546-5 Preliminary Data MOS IC Features Word-organized reprogrammable nonvolatile memory in n-channel floating-gate technology (E 2 PROM)
More informationHigh Performance RS-232 Line Drivers/Receivers
SP202E,SP232E, SP233E, SP310E and SP312E High Performance RS-232 Line Drivers/Receivers FEATURES Operates from a Single +5V Power Supply Meets all RS-232D and ITU V.28 Specifications Operates with 0.1μF
More informationIntel386 TM DX MICROPROCESSOR 32-BIT CHMOS MICROPROCESSOR WITH INTEGRATED MEMORY MANAGEMENT (PQFP SUPPLEMENT)
Intel386 TM DX MICROPROCESSOR 32-BIT CHMOS MICROPROCESSOR WITH INTEGRATED MEMORY MANAGEMENT (PQFP SUPPLEMENT) Y Flexible 32-Bit Microprocessor 8 16 32-Bit Data Types 8 General Purpose 32-Bit Registers
More informationHA7E-User Manual ASCII RS232 to 1-Wire Host Adapter
HA7E-User Manual ASCII RS232 to 1-Wire Host Adapter http://www.embeddeddatasystems.com FEATURES ASCII command support for all 1-Wire devices. Powered by RS232 handshake lines. Automatic power up and power
More informationREV: PAGE: REVISION DESCRIPTION APPR: DATE: B - Released as a standard product. GRW 11/05/96
PAGE: REVISION DESCRIPTION APPR: DATE: B - Released as a standard product. GRW 11/05/96 B.1 5, 11 7 Removed reference to R5-C9 reset circuit in SYSTEM BLOCK DIAGRAM and RESET sections since components
More informationQPRO Family of XC1700E Configuration PROMs
11 QPRO Family of XC1700E Configuration PROMs Product Specification Features Configuration one-time programmable (OTP) read-only memory designed to store configuration bitstreams of Xilinx FPGA devices
More informationPreliminary Data MOS IC. Type Ordering Code Package SDA Q67100-H5092 P-DIP-8-1
Nonvolatile Memory 1-Kbit E 2 PROM SDA 2516-5 Preliminary Data MOS IC Features Word-organized reprogrammable nonvolatile memory in n-channel floating-gate technology (E 2 PROM) 128 8-bit organization Supply
More information12-NOV E32 RYN25AI. High performance GPS / Glonass Antenna Module. Datasheet
12-NOV-2018 56312E32 High performance GPS / Glonass Antenna Module Datasheet PRODUCT DESCRIPTION The REYAX GPS/Glonass receiver module with embedded GPS/Glonass antenna enables high performance navigation
More informationAchieving EMV Electrical Compliance with the Teridian 73S8024RN
August 2005 Achieving EMV Electrical Compliance with the Teridian 1 Introduction This application note highlights particular testing considerations required to achieve compliance for payment systems smart
More informationStereo Audio Volume Control
PGA2310 Stereo Audio Volume Control FEATURES DIGITALLY CONTROLLED ANALOG VOLUME CONTROL Two Independent Audio Channels Serial Control Interface Zero Crossing Detection Mute Function WIDE GAIN AND ATTENUATION
More informationFigure 1 Typical Application Circuit
4-CH CAPACITIVE TOUCH SENSOR WITH AUTO CALIBRATION August 2015 GENERAL DESCRIPTION The IS31SE5104 is a low power, fully integrated 4-channel solution for capacitive touch button applications. The chip
More informationGPS Evaluation Kit A1080
GPS Evaluation Kit A1080 A description of an evaluation system for Vincotech s GPS Receiver Module A1080-A/-B User s Manual Version 4.0 Hardware Revision 02 Revision History Rev. Date Description 1.0 12-05-06
More informationWristPC. WristPC Wearable Keyboard AZERTY Special (Version 2.0L and above) Copyright L3 Systems, Inc. Redmond, WA
WristPC WristPC Wearable Keyboard AZERTY Special (Version 2.0L and above) Copyright 1998-2007 L3 Systems, Inc. Redmond, WA Warranty L3 Systems guarantees this product to be free of defects in material
More informationS-2900A. Rev CMOS 512-bit SERIAL E 2 PROM
Rev.1.11 CMOS 512-bit SERIAL E 2 PROM S-29A The S-29A is a wide operating voltage range, low power consumption 512-bit E 2 PROM. The organization is 64-word 8-bit, and can be read or written serially.
More information2-Axis Counter BDD 622
2-Axis Counter BDD 622 Technical Description, User's Guide english No. 622-221 D/E. Edition 0701; Subject to modification. www.balluff.com Balluff GmbH Schurwaldstrasse 9 73765 Neuhausen a.d.f. Germany
More informationMIC705/706/707/708. General Description. Features. Applications. Typical Application. µp Supervisory Circuit
µp Supervisory Circuit General Description The MIC705, MIC706, MIC707, and MIC708 are inexpensive microprocessor supervisory circuits that monitor power supplies in microprocessor-based systems. The circuit
More information1-megabit (64K x 16) 5-volt Only Flash Memory AT49F1024A Features Description Pin Configurations
BDTIC www.bdtic.com/atmel Features Single-voltage Operation 5V Read 5V Reprogramming Fast Read Access Time 45 ns Internal Program Control and Timer 8K Word Boot Block with Lockout Fast Erase Cycle Time
More informationUSB1. Encoder Data Acquisition USB Device Page 1 of 6. Description. Features
Description USB1 Page 1 of 6 The USB1 is no longer available for purchase, and has been replaced by our recently released USB4. The USB4 is a redesigned, enhanced version of the USB1, and is already available
More information16COM/40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD
6COM/4SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD INTRODUCTION is a dot matrix LCD driver & controller LSI which is fabricated by low power CMOS technology It can display, 2-line with 5 x 8 or 5 x dots
More informationFeatures: Analog to Digital: 12 bit resolution TTL outputs, RS-232 tolerant inputs 4.096V reference (1mV/count) 115K max speed
The Multi-I/O expansion board gives users the ability to add analog inputs and outputs, UART capability (for GPS or modem) and isolated high current outputs to the Flashlite 386Ex. Available in several
More informationFM24C16C-GTR. 16Kb Serial 5V F-RAM Memory. Features. Description. Pin Configuration NC NC NC VSS VDD WP SCL SDA. Ordering Information.
Preliminary FM24C16C 16Kb Serial 5V F-RAM Memory Features 16K bit Ferroelectric Nonvolatile RAM Organized as 2,048 x 8 bits High Endurance (10 12 ) Read/Write Cycles 36 year Data Retention at +75 C NoDelay
More information1-Megabit (128K x 8) Low Voltage Paged Parallel EEPROMs AT28LV010
BDTIC www.bdtic.com/atmel Features Single 3.3V ± 10% Supply Fast Read Access Time 200 ns Automatic Page Write Operation Internal Address and Data Latches for 128 Bytes Internal Control Timer Fast Write
More information4-Megabit (512K x 8) 5-volt Only CMOS Flash Memory AT49F040 AT49F040T AT49F040/040T AT49F040/040T. Features. Description. Pin Configurations
Features Single Voltage Operation 5V Read 5V Reprogramming Fast Read Access Time - 70 ns Internal Program Control and Timer 16K bytes Boot Block With Lockout Fast Erase Cycle Time - 10 seconds Byte By
More informationDS1676 Total Elapsed Time Recorder, Erasable
www.dalsemi.com Preliminary DS1676 Total Elapsed Time Recorder, Erasable FEATURES Records the total time that the Event Input has been active and the number of events that have occurred. Volatile Elapsed
More informationDIGITAL COMPASS SOLUTION
Features 5 Heading Accuracy, 0.5 Resolution 2-axis Capability Small Size (19mm x 19mm x 4.5mm), Light Weight Advanced Hard Iron Calibration Routine for Stray Fields and Ferrous Objects 0 to 70 C Operating
More informationSupplement for module D061 incl. ATMega128 Prozessor
Supplement for module D061 incl. ATMega128 Prozessor V 1.3 16. March 2006 2006 by Peter Küsters This document is in copyright protected. It is not permitted to change any part of it. It is not permitted
More informationINTEGRATED CIRCUITS. PCA bit I 2 C-bus and SMBus I/O port with interrupt. Product data sheet Supersedes data of 2004 Sep 30.
INTEGRATED CIRCUITS 16-bit I 2 C-bus and SMBus I/O port with interrupt Supersedes data of 2004 Sep 30 2006 Aug 25 16-bit I 2 C and SMBus I/O port with interrupt DESCRIPTION The is a 24-pin CMOS device
More informationHT1621. RAM Mapping 32 4 LCD Controller for I/O µc. Features. General Description. Selection Table
RAM Mapping 32 4 LCD Controller for I/O µc Features Operating voltage : 2.4V~5.2V Built-in 256kHz RC oscillator External 32.768kHz crystal or 256kHz frequency source input Selection of 1/2 or 1/3 bias,
More informationMIC706P/R/S/T, MIC708R/S/T
MIC706P/R/S/T, MIC708R/S/T µp Supervisory Circuit General Description The MIC706 and MIC708 are inexpensive microprocessor supervisory circuits that monitor power supplies in 3.0 and 3.3 microprocessor-based
More informationCraft Port Tiny RS-232 Transceiver for Portable Applications ADM101E. Data Sheet FUNCTIONAL BLOCK DIAGRAM
Data Sheet FEATURES 460 kbit/s Transmission Rate Single 5 V Power Supply Compatible with RS-232 Input/Output Levels 0.1 μf Charge Pump Capacitors One Driver and One Receiver On-Board DC-DC Converter ±4.2
More informationBefore powering on your driver, read this manual thoroughly. If you have any doubt or suggestion, please do not hesitate to contact us!
Laser diode driver Datasheet & User Manual Before powering on your driver, read this manual thoroughly. If you have any doubt or suggestion, please do not hesitate to contact us! LLC, st. Sedova, 37, lit.
More informationLow-Power-Radio Transceiver IC
Addressed Mode With Acknowledge Broadcast Mode Automatic Retry Serial Interface Stand Alone Operation Achieves Maximum Range From RF Modules Flow Control Option Two Telemetry I/O Lines (addressed mode
More informationMIC1832. General Description. Features. Applications. Typical Application
3.3V Voltage Supervisor with Manual Reset, Watchdog Timer and Dual Reset Outputs General Description The is a low-current microprocessor supervisor for monitoring 3.3V and 3V systems. The device features
More information