CS201 Lecture 2 GDB, The C Library
|
|
- Alexina Morrison
- 6 years ago
- Views:
Transcription
1 CS201 Lecture 2 GDB, The C Library RAOUL RIVAS PORTLAND STATE UNIVERSITY
2 Announcements 2
3 Multidimensional Dynamically Allocated Arrays Direct access support. Same as Multidimensional Static Arrays No direct allocation support Declare a single dimension array of pointers (Rows) For each row allocate an array (Columns) Char** array Char* 0x100 0x123 0x230 0x510 X Y Z A B C D E F G H I What s the value of array[1][2]? 3
4 Multidimensional Dynamically Allocated Arrays char** array; int i; Char** Char* array = (char**)malloc(sizeof(char*)*4); for(i=0; i < 4; i++){ array[i] = (char*)malloc(sizeof(char)*3); } array 0x100 0x123 0x230 0x510 X Y Z A B C D E F G H I array[2][0]= D ; for(i=0; i < 4; i++) { free (array[i]); } free(array); 4
5 Alternate Method Store the data in a single dimension array Flatten array into a single dimension Compute offsets during access Can t use multiple subscripts X Y Z A B C D E F G H I array X Y Z A B C D E F G H I 0 11 array = (char*)malloc(sizeof(char*)*4*3); idx=2*3+1; array[idx]= E ; free(array); 5
6 GDB Overview Inspect program execution and state at any point in time. Set breakpoints Read variable, dump stack Useful to find a wide range of bugs Must compile the program to include Symbols Use the g or ggdb flag If possible use O0 to disable optimizations 6
7 GDB Interactive Shell GDB is based on an interactive shell The shell prompt symbol is (gdb) History of past command TAB for autocompletion Integrated help Call the help command followed by the name of the command you need info about (gdb) help mycommand 7
8 Using GDB You can specify the program to load in the command line gdb myprogram Or you can load the program using the file command in the gdb prompt (gdb) (gdb) file myprogram To run your program use the run command (gdb) run If your code crashes you will see additional crash information 8
9 How to debug a program Debugging is a lot like fishing Stop execution at possible suspecting points or functions Look for the values of each variable until you can determine the problem Step through specific functions or loops to find any problems in your code 9
10 Breakpoints Breakpoints stop execution of a program at a specific point Use the break command Stop at a specific line in a source file (gdb) break file5.c:67 Stop at line 67 of file5.c Stop at a specific function (gdb) break my_func Stop at function my_func() After setting a breakpoint start your program using the run command 10
11 Navigating the Code GDB stops the execution of your program at a breakpoint GDB command prompt will appear To step through the code use the step command (gdb) step Executes one instruction and stops. If the line is a function it will step into your function Visual Studio calls this Step Into To execute an entire function as if it was a single instruction use the command next (gdb) next Visual Studio calls this Step Over For assembly use stepi and nexti! 11
12 Next vs. Step Next int main() { int val=5, result; } res=factorial(val); printf( %d\n, result); return 0; Step int factorial(int n) { int i, retv=1; } for(i=1; i<= n; i++) { retv*= 1; } return retv; 12
13 Printing a variable To print a variable use the command print (gdb) print myvar GDB can print variables members of structures (gdb) print mystruct.myvar Dereference pointer (gdb) print *myptr Support self-referential structures (gdb) print mylist->next->next 13
14 Watchpoint A watchpoint is similar to a breakpoint, except that it stops the execution when the value of a variable change No associated position in the code Variable is the stopping trigger Use the watch command to set a watchpoint on a variable (gdb) watch myvar Pause execution when the variable myvar changes int main() { int val=5, result; result= val + 1; val= 25; } When GDB stops if we set a Watchpoint on variable val? Val=25 14
15 Conditional Breakpoints Stop in a breakpoint only if certain condition is met Good to debug array or loop boundaries Cases where code fails with certain values Use the following syntax: (gdb) break breakpoint if condition Example (gdb) break file1:6 if i > ARRAYSIZE Stop at line 6 of file1 if i > ARRAYSIZE 15
16 Debugging in Windows GDB is the most popular debugger in Linux In Windows you can use WinDBG or the more user friendly Visual Studio Debugger Breakpoints, Watchpoints, Conditional Breakpoints Windows keeps Symbols in separate Program Database Files (PDB) PDB files must be loaded into WinDbg to produce any meaningful information A PDB file is specific to a particular build! 16
17 The C Library Standard library available across all C compilers Part of ANSI C Many implementations Microsoft C Runtime Library GNU C library Provides many services File Access Read and write to console String Manipulation Mathematical functions Time and Date functions Divided into modules Include header file with definitions before you can use them #include <header.h> 17
18 Back to Hello, world #include <stdio.h> Include stdio.h header file (so we can use printf) main() { printf( hello, world ); } 18
19 String Manipulation Assumes all strings are C-Strings char arrays with NULL character at the end ( \0 ) strlen(char *s1) Returns the number of character in the string not including the NULL character strncpy(char *dest, char *src, int n) Copies at most n characters of src on top of dest strncmp(char *s1, char *s2, int n) Compares up to n characters of s1 with s2 Returns 0 if s1== s2. Returns less than 0 if s1 < s2. Returns more than 0 if s1 > s2 strncat(char* s1, char *s2, int n) Appends up to n characters of s2 at the end of s1 19
20 String Manipulation #include <stdio.h> #include <string.h> int main () { char str1[]= "To be or not to be"; char str2[40]; char str3[6]; /* copy to sized buffer */ strncpy ( str2, str1, sizeof(str2) ); /* partial copy (only 5 chars): */ strncpy ( str3, str2, 5 ); /* null character manually added */ str3[5] = '\0'; Is the manually added NULL necessary? Why? } return 0; 20
21 File I/O FILE *fopen(const char *filename, const char *mode); Opens/Creates a file for read or write. Returns a pointer to a FILE structure Mode: r - Read, w - Write, a - Append, b - Binary mode int fclose(file *a_file); Close the file ASCII Read/Write fprintf(), fscanf(), fgets() Usually read one line at a time Good for Text, CSV files and files with line breaks Binary Read/Write Write of data in binary format Read/Write M-blocks of N-bytes at a time Use fwrite() and fread() 21
22 Console I/O Console I/O is like reading from a file. You can use the same file functions just specify stdin and stdout as the file pointers stdin stdout There are some specific functions for stdin and stdout are provided in the C library Most used function for console writing is printf Sometimes the File and Console versions have different behaviors or parameters fgets() does not behave the same a gets() Data read from the file/console must be validated fscanf() and scanf() are subject to many attacks fgets() is the safest way to read from the file/console Parse the string afterwards and convert to the specific types 22
23 String to Numbers Various functions based on the type strtol, strtoll, stroul, etc long int strtol (const char* str, char** endptr, int base); Parses a number inside a string and outputs it as a long str contains the string to parse endptr is an optional return value to the remaining of the string after the number base is the Base of the number (hex, octal, decimal, etc). Use zero for autodetect based on the format. int main () { char str1[]= ; long number; } number=strtol(str1, NULL, 10); return 0; 23
24 Numbers to Strings Use sprint to create a string with the format you need sprintf(char* str, char *format, ) str contains the destination string. Make sure is pre-allocated to the maximum possible length. Limits.h contains macros with the largest and smallest number supported for each type. log 10 (MaxNum) + 1, not counting the sign Format is the format string used by the printf family of functions printf, fprintf, sprint int main () { char str1[12]; int number= ; } sprintf(str1, %d, number); return 0; 24
25 Assertions Assertions are runtime checks placed on a program that are only checked during development They are ignored for production code. We define the macro NDEBUG to indicate that our code is production code #define NDEBUG An Assertion must be true at the time of its execution or the program will stop. To check an assertion we call the assert() function assert(condition); Do not use assertions to catch user or runtime errors 25
26 Assertions int main() { int str1[] = {1,2,3,4,5} int str2[3]; } assert(sizeof(str1) == sizeof(str2)); memcpy(str2, str1, sizeof(str1)); Not a user or runtime error Assert Fails and memcpy never executes 26
27 Summary Dynamically allocated multidimensional arrays are usually declared as an array of pointers to one dimension arrays GDB is the GNU Debugger. Inspect variables, breakpoints, watchpoints, step by step execution The C library is a standard ANSI library String Manipulations, File Access, Console I/O, Memory Allocation 27
Exercise Session 6 Computer Architecture and Systems Programming
Systems Group Department of Computer Science ETH Zürich Exercise Session 6 Computer Architecture and Systems Programming Herbstsemester 2016 Agenda GDB Outlook on assignment 6 GDB The GNU Debugger 3 Debugging..
More information18-600: Recitation #3
18-600: Recitation #3 Bomb Lab & GDB Overview September 12th, 2017 1 Today X86-64 Overview Bomb Lab Introduction GDB Tutorial 2 3 x86-64: Register Conventions Arguments passed in registers: %rdi, %rsi,
More informationPointers, Arrays, and Strings. CS449 Spring 2016
Pointers, Arrays, and Strings CS449 Spring 2016 Pointers Pointers are important. Pointers are fun! Pointers Every variable in your program has a memory location. This location can be accessed using & operator.
More informationLecture 03 Bits, Bytes and Data Types
Lecture 03 Bits, Bytes and Data Types Computer Languages A computer language is a language that is used to communicate with a machine. Like all languages, computer languages have syntax (form) and semantics
More informationStandard C Library Functions
Demo lecture slides Although I will not usually give slides for demo lectures, the first two demo lectures involve practice with things which you should really know from G51PRG Since I covered much of
More informationTopic 8: I/O. Reading: Chapter 7 in Kernighan & Ritchie more details in Appendix B (optional) even more details in GNU C Library manual (optional)
Topic 8: I/O Reading: Chapter 7 in Kernighan & Ritchie more details in Appendix B (optional) even more details in GNU C Library manual (optional) No C language primitives for I/O; all done via function
More informationCSCI 171 Chapter Outlines
Contents CSCI 171 Chapter 1 Overview... 2 CSCI 171 Chapter 2 Programming Components... 3 CSCI 171 Chapter 3 (Sections 1 4) Selection Structures... 5 CSCI 171 Chapter 3 (Sections 5 & 6) Iteration Structures
More informationHigh-performance computing and programming Intro to C on Unix/Linux. Uppsala universitet
High-performance computing and programming Intro to C on Unix/Linux IT Uppsala universitet What is C? An old imperative language that remains rooted close to the hardware C is relatively small and easy
More informationLecture 07 Debugging Programs with GDB
Lecture 07 Debugging Programs with GDB In this lecture What is debugging Most Common Type of errors Process of debugging Examples Further readings Exercises What is Debugging Debugging is the process of
More informationStandard File Pointers
1 Programming in C Standard File Pointers Assigned to console unless redirected Standard input = stdin Used by scan function Can be redirected: cmd < input-file Standard output = stdout Used by printf
More informationLibrary Functions. General Questions
1 Library Functions General Questions 1. What will the function rewind() do? A. Reposition the file pointer to a character reverse. B. Reposition the file pointer stream to end of file. C. Reposition the
More informationGDB Tutorial. A Walkthrough with Examples. CMSC Spring Last modified March 22, GDB Tutorial
A Walkthrough with Examples CMSC 212 - Spring 2009 Last modified March 22, 2009 What is gdb? GNU Debugger A debugger for several languages, including C and C++ It allows you to inspect what the program
More informationSystem Software Experiment 1 Lecture 7
System Software Experiment 1 Lecture 7 spring 2018 Jinkyu Jeong ( jinkyu@skku.edu) Computer Systems Laboratory Sungyunkwan University http://csl.skku.edu SSE3032: System Software Experiment 1, Spring 2018
More informationCS201 - Lecture 1 The C Programming Language
CS201 - Lecture 1 The C Programming Language RAOUL RIVAS PORTLAND STATE UNIVERSITY History of the C Language The C language was invented in 1970 by Dennis Ritchie Dennis Ritchie and Ken Thompson were employees
More informationCharacters, Character Strings, and string-manipulation functions in C
Characters, Character Strings, and string-manipulation functions in C see Kernighan & Ritchie Section 1.9, Appendix B3 Characters Printable characters (and some non-printable ones) are represented as 8-bit
More informationGetting Started. Project 1
Getting Started Project 1 Project 1 Implement a shell interface that behaves similarly to a stripped down bash shell Due in 3 weeks September 21, 2015, 11:59:59pm Specification, grading sheet, and test
More informationComputer Programming Unit v
READING AND WRITING CHARACTERS We can read and write a character on screen using printf() and scanf() function but this is not applicable in all situations. In C programming language some function are
More informationCSC209H Lecture 3. Dan Zingaro. January 21, 2015
CSC209H Lecture 3 Dan Zingaro January 21, 2015 Streams (King 22.1) Stream: source of input or destination for output We access a stream through a file pointer (FILE *) Three streams are available without
More informationCS 261 Fall Mike Lam, Professor. Structs and I/O
CS 261 Fall 2018 Mike Lam, Professor Structs and I/O Typedefs A typedef is a way to create a new type name Basically a synonym for another type Useful for shortening long types or providing more meaningful
More informationCSCI0330 Intro Computer Systems Doeppner. Lab 02 - Tools Lab. Due: Sunday, September 23, 2018 at 6:00 PM. 1 Introduction 0.
CSCI0330 Intro Computer Systems Doeppner Lab 02 - Tools Lab Due: Sunday, September 23, 2018 at 6:00 PM 1 Introduction 0 2 Assignment 0 3 gdb 1 3.1 Setting a Breakpoint 2 3.2 Setting a Watchpoint on Local
More informationArray Initialization
Array Initialization Array declarations can specify initializations for the elements of the array: int primes[10] = { 2, 3, 5, 7, 11, 13, 17, 19, 23, 29 ; initializes primes[0] to 2, primes[1] to 3, primes[2]
More informationPrograms. Function main. C Refresher. CSCI 4061 Introduction to Operating Systems
Programs CSCI 4061 Introduction to Operating Systems C Program Structure Libraries and header files Compiling and building programs Executing and debugging Instructor: Abhishek Chandra Assume familiarity
More informationShould you know scanf and printf?
C-LANGUAGE INPUT & OUTPUT C-Language Output with printf Input with scanf and gets_s and Defensive Programming Copyright 2016 Dan McElroy Should you know scanf and printf? scanf is only useful in the C-language,
More informationCopyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Chapter 18 I/O in C Standard C Library I/O commands are not included as part of the C language. Instead, they are part of the Standard C Library. A collection of functions and macros that must be implemented
More informationCS113: Lecture 7. Topics: The C Preprocessor. I/O, Streams, Files
CS113: Lecture 7 Topics: The C Preprocessor I/O, Streams, Files 1 Remember the name: Pre-processor Most commonly used features: #include, #define. Think of the preprocessor as processing the file so as
More informationCS356: Discussion #5 Debugging with GDB. Marco Paolieri
CS356: Discussion #5 Debugging with GDB Marco Paolieri (paolieri@usc.edu) Schedule: Exams and Assignments Week 1: Binary Representation HW0. Week 2: Integer Operations Week 3: Floating-Point Operations
More informationProgramming in C. Session 8. Seema Sirpal Delhi University Computer Centre
Programming in C Session 8 Seema Sirpal Delhi University Computer Centre File I/O & Command Line Arguments An important part of any program is the ability to communicate with the world external to it.
More informationInput/Output and the Operating Systems
Input/Output and the Operating Systems Fall 2015 Jinkyu Jeong (jinkyu@skku.edu) 1 I/O Functions Formatted I/O printf( ) and scanf( ) fprintf( ) and fscanf( ) sprintf( ) and sscanf( ) int printf(const char*
More informationAccessing Files in C. Professor Hugh C. Lauer CS-2303, System Programming Concepts
Accessing Files in C Professor Hugh C. Lauer CS-2303, System Programming Concepts (Slides include materials from The C Programming Language, 2 nd edition, by Kernighan and Ritchie, Absolute C++, by Walter
More informationInput / Output Functions
CSE 2421: Systems I Low-Level Programming and Computer Organization Input / Output Functions Presentation G Read/Study: Reek Chapter 15 Gojko Babić 10-03-2018 Input and Output Functions The stdio.h contain
More informationContents. A Review of C language. Visual C Visual C++ 6.0
A Review of C language C++ Object Oriented Programming Pei-yih Ting NTOU CS Modified from www.cse.cuhk.edu.hk/~csc2520/tuto/csc2520_tuto01.ppt 1 2 3 4 5 6 7 8 9 10 Double click 11 12 Compile a single source
More informationFile IO and command line input CSE 2451
File IO and command line input CSE 2451 File functions Open/Close files fopen() open a stream for a file fclose() closes a stream One character at a time: fgetc() similar to getchar() fputc() similar to
More informationCSci 4061 Introduction to Operating Systems. Input/Output: High-level
CSci 4061 Introduction to Operating Systems Input/Output: High-level I/O Topics First, cover high-level I/O Next, talk about low-level device I/O I/O not part of the C language! High-level I/O Hide device
More informationLecture 9: File Processing. Quazi Rahman
60-141 Lecture 9: File Processing Quazi Rahman 1 Outlines Files Data Hierarchy File Operations Types of File Accessing Files 2 FILES Storage of data in variables, arrays or in any other data structures,
More informationStream Model of I/O. Basic I/O in C
Stream Model of I/O 1 A stream provides a connection between the process that initializes it and an object, such as a file, which may be viewed as a sequence of data. In the simplest view, a stream object
More informationProgrammer s Points to Remember:
Programmer s Points to Remember: Always do bounds checking on arrays. Always do bounds checking on pointer arithmetic. Before you copy to, format, or send input to a buffer make sure it is big enough to
More informationArrays and Strings. CS449 Fall 2017
Arrays and Strings CS449 Fall 2017 Arrays Data type for a sequence of variables of the given element type in consecubve memory Element type can be any data type. E.g. char A[10]; // sequence of chars int
More information25.2 Opening and Closing a File
Lecture 32 p.1 Faculty of Computer Science, Dalhousie University CSCI 2132 Software Development Lecture 32: Dynamically Allocated Arrays 26-Nov-2018 Location: Chemistry 125 Time: 12:35 13:25 Instructor:
More informationUNIT IV-2. The I/O library functions can be classified into two broad categories:
UNIT IV-2 6.0 INTRODUCTION Reading, processing and writing of data are the three essential functions of a computer program. Most programs take some data as input and display the processed data, often known
More informationContents. Preface. Introduction. Introduction to C Programming
c11fptoc.fm Page vii Saturday, March 23, 2013 4:15 PM Preface xv 1 Introduction 1 1.1 1.2 1.3 1.4 1.5 Introduction The C Programming Language C Standard Library C++ and Other C-Based Languages Typical
More information8. Characters, Strings and Files
REGZ9280: Global Education Short Course - Engineering 8. Characters, Strings and Files Reading: Moffat, Chapter 7, 11 REGZ9280 14s2 8. Characters and Arrays 1 ASCII The ASCII table gives a correspondence
More informationCSC209: Software tools. Unix files and directories permissions utilities/commands Shell programming quoting wild cards files
CSC209 Review CSC209: Software tools Unix files and directories permissions utilities/commands Shell programming quoting wild cards files ... and systems programming C basic syntax functions arrays structs
More informationCSC209: Software tools. Unix files and directories permissions utilities/commands Shell programming quoting wild cards files. Compiler vs.
CSC209 Review CSC209: Software tools Unix files and directories permissions utilities/commands Shell programming quoting wild cards files... and systems programming C basic syntax functions arrays structs
More informationLecture07: Strings, Variable Scope, Memory Model 4/8/2013
Lecture07: Strings, Variable Scope, Memory Model 4/8/2013 Slides modified from Yin Lou, Cornell CS2022: Introduction to C 1 Outline Review pointers New: Strings New: Variable Scope (global vs. local variables)
More informationStudent Number: Instructor: Reid Section: L5101 (6:10-7:00pm)
Final Test Duration 50 minutes Aids allowed: none Last Name: Student Number: First Name: Instructor: Reid Section: L5101 (6:10-7:00pm) Do not turn this page until you have received the signal to start.
More informationCS354 gdb Tutorial Written by Chris Feilbach
CS354 gdb Tutorial Written by Chris Feilbach Purpose This tutorial aims to show you the basics of using gdb to debug C programs. gdb is the GNU debugger, and is provided on systems that
More informationCSE 374 Programming Concepts & Tools. Brandon Myers Winter 2015 Lecture 11 gdb and Debugging (Thanks to Hal Perkins)
CSE 374 Programming Concepts & Tools Brandon Myers Winter 2015 Lecture 11 gdb and Debugging (Thanks to Hal Perkins) Hacker tool of the week (tags) Problem: I want to find the definition of a function or
More informationOutline. Computer programming. Debugging. What is it. Debugging. Hints. Debugging
Outline Computer programming Debugging Hints Gathering evidence Common C errors "Education is a progressive discovery of our own ignorance." Will Durant T.U. Cluj-Napoca - Computer Programming - lecture
More informationWe first learn one useful option of gcc. Copy the following C source file to your
Lecture 5 p.1 Faculty of Computer Science, Dalhousie University CSCI 2132 Software Development Lab 5: gcc and gdb tools 10-Oct-2018 Location: Teaching Labs Time: Thursday Instructor: Vlado Keselj Lab 5:
More informationC Basics And Concepts Input And Output
C Basics And Concepts Input And Output Report Working group scientific computing Department of informatics Faculty of mathematics, informatics and natural sciences University of Hamburg Written by: Marcus
More informationChapter 16. Pointers and Arrays. Address vs. Value. Another Need for Addresses
Chapter 16 Pointers and Arrays Based on slides McGraw-Hill Additional material 200/2005 Lewis/Martin Pointers and Arrays We've seen examples of both of these in our LC- programs; now we'll see them in
More informationBinghamton University. CS-211 Fall Input and Output. Streams and Stream IO
Input and Output Streams and Stream IO 1 Standard Input and Output Need: #include Large list of input and output functions to: Read and write from a stream Open a file and make a stream Close
More informationCMPSC 311- Introduction to Systems Programming Module: Debugging
CMPSC 311- Introduction to Systems Programming Module: Debugging Professor Patrick McDaniel Fall 2014 Debugging Often the most complicated and time-consuming part of developing a program is debugging.
More informationArrays, Strings, & Pointers
Arrays, Strings, & Pointers Alexander Nelson August 31, 2018 University of Arkansas - Department of Computer Science and Computer Engineering Arrays, Strings, & Pointers Arrays, Strings, & Pointers are
More informationLinux Memory Layout. Lecture 6B Machine-Level Programming V: Miscellaneous Topics. Linux Memory Allocation. Text & Stack Example. Topics.
Lecture 6B Machine-Level Programming V: Miscellaneous Topics Topics Linux Memory Layout Understanding Pointers Buffer Overflow Upper 2 hex digits of address Red Hat v. 6.2 ~1920MB memory limit FF C0 Used
More informationWhy arrays? To group distinct variables of the same type under a single name.
Lesson #7 Arrays Why arrays? To group distinct variables of the same type under a single name. Suppose you need 100 temperatures from 100 different weather stations: A simple (but time consuming) solution
More informationPlay with FILE Structure Yet Another Binary Exploitation Technique. Abstract
Play with FILE Structure Yet Another Binary Exploitation Technique An-Jie Yang (Angelboy) angelboy@chroot.org Abstract To fight against prevalent cyber threat, more mechanisms to protect operating systems
More informationFloating-point lab deadline moved until Wednesday Today: characters, strings, scanf Characters, strings, scanf questions clicker questions
Announcements Thursday Extras: CS Commons on Thursdays @ 4:00 pm but none next week No office hours next week Monday or Tuesday Reflections: when to use if/switch statements for/while statements Floating-point
More informationCS 261 Fall C Introduction. Variables, Memory Model, Pointers, and Debugging. Mike Lam, Professor
CS 261 Fall 2017 Mike Lam, Professor C Introduction Variables, Memory Model, Pointers, and Debugging The C Language Systems language originally developed for Unix Imperative, compiled language with static
More informationBinghamton University. CS-220 Spring Includes & Streams
Includes & Streams 1 C Pre-Processor C Program Pre-Processor Pre-processed C Program Header Files Header Files 2 #include Two flavors: #include Replace this line with the contents of file abc.h
More informationFile I/O. Arash Rafiey. November 7, 2017
November 7, 2017 Files File is a place on disk where a group of related data is stored. Files File is a place on disk where a group of related data is stored. C provides various functions to handle files
More informationUNIT-V CONSOLE I/O. This section examines in detail the console I/O functions.
UNIT-V Unit-5 File Streams Formatted I/O Preprocessor Directives Printf Scanf A file represents a sequence of bytes on the disk where a group of related data is stored. File is created for permanent storage
More information211: Computer Architecture Summer 2016
211: Computer Architecture Summer 2016 Liu Liu Topic: C Programming Data Representation I/O: - (example) cprintf.c Memory: - memory address - stack / heap / constant space - basic data layout Pointer:
More informationIntroduction to Programming Systems
Introduction to Programming Systems CS 217 Thomas Funkhouser & Bob Dondero Princeton University Goals Master the art of programming Learn how to be good programmers Introduction to software engineering
More informationStrings. Arrays of characters. Pallab Dasgupta Professor, Dept. of Computer Sc & Engg INDIAN INSTITUTE OF TECHNOLOGY
Strings Arrays of characters Pallab Dasgupta Professor, Dept. of Computer Sc & Engg INDIAN INSTITUTE OF TECHNOLOGY 1 Basics Strings A string is a sequence of characters treated as a group We have already
More informationLectures 5-6: Introduction to C
Lectures 5-6: Introduction to C Motivation: C is both a high and a low-level language Very useful for systems programming Faster than Java This intro assumes knowledge of Java Focus is on differences Most
More informationMode Meaning r Opens the file for reading. If the file doesn't exist, fopen() returns NULL.
Files Files enable permanent storage of information C performs all input and output, including disk files, by means of streams Stream oriented data files are divided into two categories Formatted data
More informationupper and lower case English letters: A-Z and a-z digits: 0-9 common punctuation symbols special non-printing characters: e.g newline and space.
The char Type The C type char stores small integers. It is 8 bits (almost always). char guaranteed able to represent integers 0.. +127. char mostly used to store ASCII character codes. Don t use char for
More informationCSE 124 Discussion (10/3) C/C++ Basics
CSE 124 Discussion (10/3) C/C++ Basics Topics - main() function - Compiling with gcc/makefile - Primitives - Structs/Enums - Function calls/loops - C++ Classes/stdtl - Pointers/Arrays - Memory allocation/freeing
More informationCSE2301. Introduction. Streams and Files. File Access Random Numbers Testing and Debugging. In this part, we introduce
Warning: These notes are not complete, it is a Skelton that will be modified/add-to in the class. If you want to us them for studying, either attend the class or get the completed notes from someone who
More informationCMPT 300. Operating Systems. Brief Intro to UNIX and C
CMPT 300 Operating Systems Brief Intro to UNIX and C Outline Welcome Review Questions UNIX basics and Vi editor Using SSH to remote access Lab2(4214) Compiling a C Program Makefile Basic C/C++ programming
More informationPROGRAMMAZIONE I A.A. 2017/2018
PROGRAMMAZIONE I A.A. 2017/2018 INPUT/OUTPUT INPUT AND OUTPUT Programs must be able to write data to files or to physical output devices such as displays or printers, and to read in data from files or
More informationCMPSC 311- Introduction to Systems Programming Module: Debugging
CMPSC 311- Introduction to Systems Programming Module: Debugging Professor Patrick McDaniel Fall 2016 Debugging Often the most complicated and time-consuming part of developing a program is debugging.
More informationCYSE 411/AIT681 Secure Software Engineering Topic #12. Secure Coding: Formatted Output
CYSE 411/AIT681 Secure Software Engineering Topic #12. Secure Coding: Formatted Output Instructor: Dr. Kun Sun 1 This lecture: [Seacord]: Chapter 6 Readings 2 Secure Coding String management Pointer Subterfuge
More information2/9/18. CYSE 411/AIT681 Secure Software Engineering. Readings. Secure Coding. This lecture: String management Pointer Subterfuge
CYSE 411/AIT681 Secure Software Engineering Topic #12. Secure Coding: Formatted Output Instructor: Dr. Kun Sun 1 This lecture: [Seacord]: Chapter 6 Readings 2 String management Pointer Subterfuge Secure
More informationCSI 402 Lecture 2 Working with Files (Text and Binary)
CSI 402 Lecture 2 Working with Files (Text and Binary) 1 / 30 AQuickReviewofStandardI/O Recall that #include allows use of printf and scanf functions Example: int i; scanf("%d", &i); printf("value
More informationEE458 - Embedded Systems Lecture 4 Embedded Devel.
EE458 - Embedded Lecture 4 Embedded Devel. Outline C File Streams References RTC: Chapter 2 File Streams man pages 1 Cross-platform Development Environment 2 Software available on the host system typically
More informationSource level debugging. October 18, 2016
Source level debugging October 18, 2016 Source level debugging Source debugging is a nice tool for debugging execution problems; it can be particularly useful when working with crashed programs that leave
More informationCSE 351. GDB Introduction
CSE 351 GDB Introduction Lab 2 Out either tonight or tomorrow Due April 27 th (you have ~12 days) Reading and understanding x86_64 assembly Debugging and disassembling programs Today: General debugging
More informationChapter 5. Section 5.1 Introduction to Strings. CS 50 Hathairat Rattanasook
Chapter 5 Section 5.1 Introduction to Strings CS 50 Hathairat Rattanasook "Strings" In computer science a string is a sequence of characters from the underlying character set. In C a string is a sequence
More informationWeek 2 Intro to the Shell with Fork, Exec, Wait. Sarah Diesburg Operating Systems CS 3430
Week 2 Intro to the Shell with Fork, Exec, Wait Sarah Diesburg Operating Systems CS 3430 1 Why is the Shell Important? Shells provide us with a way to interact with the core system Executes programs on
More informationCS 33. Introduction to C. Part 5. CS33 Intro to Computer Systems V 1 Copyright 2017 Thomas W. Doeppner. All rights reserved.
CS 33 Introduction to C Part 5 CS33 Intro to Computer Systems V 1 Copyright 2017 Thomas W. Doeppner. All rights reserved. Basic Data Types int short char -2,147,483,648 2,147,483,647-32,768 32,767-128
More informationQuick review of previous lecture Ch6 Structure Ch7 I/O. EECS2031 Software Tools. C - Structures, Unions, Enums & Typedef (K&R Ch.
1 Quick review of previous lecture Ch6 Structure Ch7 I/O EECS2031 Software Tools C - Structures, Unions, Enums & Typedef (K&R Ch.6) Structures Basics: Declaration and assignment Structures and functions
More informationThis code has a bug that allows a hacker to take control of its execution and run evilfunc().
Malicious Code Insertion Example This code has a bug that allows a hacker to take control of its execution and run evilfunc(). #include // obviously it is compiler dependent // but on my system
More informationBasic C Programming. Bin Li Assistant Professor Dept. of Electrical, Computer and Biomedical Engineering University of Rhode Island
Basic C Programming Bin Li Assistant Professor Dept. of Electrical, Computer and Biomedical Engineering University of Rhode Island Announcements Exam 1 (20%): Feb. 27 (Tuesday) Tentative Proposal Deadline:
More informationCSC209 Review. Yeah! We made it!
CSC209 Review Yeah! We made it! 1 CSC209: Software tools Unix files and directories permissions utilities/commands Shell programming quoting wild cards files 2 ... and C programming... C basic syntax functions
More informationLectures 5-6: Introduction to C
Lectures 5-6: Introduction to C Motivation: C is both a high and a low-level language Very useful for systems programming Faster than Java This intro assumes knowledge of Java Focus is on differences Most
More informationMidterm Review. What makes a file executable? Dr. Jack Lange 2/10/16. In UNIX: Everything is a file
Midterm Review Dr. Jack Lange What makes a file executable? In UNIX: Everything is a file For a file to execute it needs to be marked as special Someone needs to grant it permission to execute Every file
More informationComputer Labs: Introduction to C
Computer Labs: Introduction to C 2 o MIEIC Pedro F. Souto (pfs@fe.up.pt) September 22, 2014 C vs. C++ C++ is a super-set of C C++ has classes facilitates OO programming C++ has references safer and simpler
More informationC introduction: part 1
What is C? C is a compiled language that gives the programmer maximum control and efficiency 1. 1 https://computer.howstuffworks.com/c1.htm 2 / 26 3 / 26 Outline Basic file structure Main function Compilation
More informationLab 8. Follow along with your TA as they demo GDB. Make sure you understand all of the commands, how and when to use them.
Lab 8 Each lab will begin with a recap of last lab and a brief demonstration by the TAs for the core concepts examined in this lab. As such, this document will not serve to tell you everything the TAs
More informationC mini reference. 5 Binary numbers 12
C mini reference Contents 1 Input/Output: stdio.h 2 1.1 int printf ( const char * format,... );......................... 2 1.2 int scanf ( const char * format,... );.......................... 2 1.3 char
More informationCS 449 Lecture 3. Variables in memory. Dr. Jack Lange. int x = 4;
CS 449 Lecture 3 Dr. Jack Lange int x = 4; Variables in memory X is a handle to 4 bytes of memory assigned by the compiler &x; à returns the memory locaeon What if we want to modify the value of x in another
More informationProgramming in C Quick Start! Biostatistics 615 Lecture 4
Programming in C Quick Start! Biostatistics 615 Lecture 4 Last Lecture Analysis of Algorithms Empirical Analysis Mathematical Analysis Big-Oh notation Today Basics of programming in C Syntax of C programs
More informationC Characters and Strings
CS 2060 Character handling The C Standard Library provides many functions for testing characters in ctype.h. int isdigit(int c); // is c a digit (0-9)? int isalpha(int c); // is c a letter? int isalnum(int
More informationGDB QUICK REFERENCE GDB Version 4
GDB QUICK REFERENCE GDB Version 4 Essential Commands gdb program [core] debug program [using coredump core] b [file:]function run [arglist] bt p expr c n s set breakpoint at function [in file] start your
More informationC Program Development and Debugging under Unix SEEM 3460
C Program Development and Debugging under Unix SEEM 3460 1 C Basic Elements SEEM 3460 2 C - Basic Types Type (32 bit) Smallest Value Largest Value short int -32,768(-2 15 ) 32,767(2 15-1) unsigned short
More informationAnnouncements. Strings and Pointers. Strings. Initializing Strings. Character I/O. Lab 4. Quiz. July 18, Special character arrays
Strings and Pointers Announcements Lab 4 Why are you taking this course? Lab 5 #, 8: Reading in data from file using fscanf Quiz Quiz Strings Special character arrays End in null character, \ char hi[6];
More informationCSci 4061 Introduction to Operating Systems. Programs in C/Unix
CSci 4061 Introduction to Operating Systems Programs in C/Unix Today Basic C programming Follow on to recitation Structure of a C program A C program consists of a collection of C functions, structs, arrays,
More informationChapter 8: Character & String. In this chapter, you ll learn about;
Chapter 8: Character & String Principles of Programming In this chapter, you ll learn about; Fundamentals of Strings and Characters The difference between an integer digit and a character digit Character
More information