DS-1600KI Keyboard. User Manual UD06114B

Transcription

1 DS-1600KI Keyboard User Manual UD06114B

2 User Manual COPYRIGHT 2017 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be Hikvision ). This user manual (hereinafter referred to be the Manual ) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision. Unless otherwise stipulated, Hikvision does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual This Manual is applicable to DS-1600KI Keyboard. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the company website ( Please use this user manual under the guidance of professionals. Trademarks Acknowledgement and other Hikvision s trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 1

3 Regulatory information FCC information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: /66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: 2

4 Preventive and Cautionary Tips Before connecting and operating your keyboard, please be advised of the following tips: Ensure unit is placed in a well-ventilated, dust-free environment. Keep all liquids away from the keyboard. Please check the power supply to avoid the damage caused by voltage mismatch. Please make sure the keyboard work in the allowed range of temperature and humidity. Please keep the device horizontal and avoid the installation under severe vibration environment. The dust board will cause a short circuit after damping. Please dedust regularly for the board, connector, and chassis fan with brush. 3

5 TABLE OF CONTENTS Chapter 1 Product Overview Introduction Key Features Appearance Front Panel Interfaces... 8 Chapter 2 Getting Started Activating the Keyboard Resetting the Keyboard Password Login and Logout Home Page Chapter 3 General Settings Ethernet Settings WLAN Settings Language Settings Date and Time Settings Others Setting the Brighntess Setting the Alarm Sound Chapter 4 Keyboard Operation and Management Main Menu Device Management Managing the Devices Managing the Cameras Managing the Groups Live View Staring Live View Capturing the Picture PTZ Control Video Wall Managing the Video Wall Playing Video on Video Wall Smart Scaling of Video Wall Setting the Scene Floating and Matching the Window Playback

6 4.6 System Configuration User Management Storage Management System Maintenance Chapter 5 Access to ivms Platform Configuring ivms-5200 Integrated Surveillance Management System Platform Login Managing the Resources Managing the Input Channel Displaying Video on Video Wall Chapter 6 Access to Matrix Matrix Access Gateway Login Playing Video on the Video Wall Chapter 7 Appendix Specifications Summary of Changes

7 1.1 Introduction Chapter 1 Product Overview DS-1600KI is the new generation of fully touch-enabled and detachable network keyboard independently developed by Hikvision. In addition to displaying images, the 10.1" capacitive touchscreen supports DVI and HDMI video outputs. It runs on Android 4.4 and has the brand new UI design. It is compatible with all series of front-end and back-end devices of Hikvision and control center platform such as ivms. It supports recording, picture capturing and two-way audio, as well as the video wall control and scene switch of ivms and decoding devices. The four-axis joystick can be used to the PTZ control of speed dome and quick location of the target. The joystick panel is detachable for the convenience of operation. This keyboard can be widely used in various video surveillance fields. 1.2 Key Features 10.1" capacitive touchscreen; Detachable design of the touchscreen and joystick; Capable of decoding 2-ch at 1080p resolution; Up to 16-division window display; Supports H.265 encoding format; Live view on touchscreen; DVI and HDMI output to monitor; Local playback of video; Controllable of up to 8000 devices; Accessible to private products including DVR, DVS, NVR, network camera, speed dome, etc.; Control of MVC and decoders for video decoding and output on video wall; Accessible by ivms platform and matrix access gateway; Supports video wall configuration and scene switch; Smart scaling of video wall layout; Flexible PTZ control including setting and calling the preset, calling the patrol, auto-scan, setting and calling the pattern, light on/off, wiper on/off, focus control and iris control; You can control the directions, zoom in, zoom out and capture pictures via the joystick; Upgrade and configuration files import/export by USB flash disk; Recording, picture capturing and two-way audio; Saving files in USB flash disk or uploading to FTP server; Two-level user authority and up to 32 user accounts are configurable, including one admin and 31 operators. Wired and WiFi network connection. 6

8 1.3 Appearance Figure 1-1 Appearance of DS-1600KI Keyboard The DS-1600KI keyboard consists of a touchscreen and a joystick panel. The joystick panel is detachable and can be separated from the keyboard Front Panel Refer to Table 1-1 for the description of the keyboard appearance. Number Name Table 1-1 Description of Keyboard Appearance Description 1 Touchscreen 10.1" capacitive touchscreen for display, configuration and operation of the keyboard. 2 Joystick Used for PTZ control. 3 Capture Button Used for picture capture. Refer to Table 1-2 for the description of the joystick operations. 7

9 Table 1-2 Description of Joystick Operations Graphic Operation Function Up PTZ control mode: Move the PTZ up. Down PTZ control mode: Move the PTZ down. Left PTZ control mode: Move the PTZ left. Right PTZ control mode: Move the PTZ right. Rotate anticlockwise Zoom out (ZOOM-) Rotate clockwise Zoom in (ZOOM+) Interfaces Eight interfaces and one button are provided on the rear panel of DS-1600KI keyboard LIN E AUDIO DVI IN OUT LAN 12 VDC POWER Figure 1-2 Rear Panel of DS-1600KI Refer to Table 1-3 for the description of the interfaces. 8

10 Number Name Table 1-3 Description of Intefaces Description 1 2 USB Interface One for connecting to the USB device. One for connecting to the joystick. 3 DVI DVI video output connector. 4 HDMI HDMI video output connector. 5 LINE IN 3.5 mm connector for audio input. 6 AUDIO OUT 3.5 mm connector for audio output. Note: the external amplifier must be connected. 7 LAN Network Interface 1 10M/100M/1000M adaptive Ethernet interface. 8 Power Input 12 VDC power input. 9 Power Switch Press to turn on or turn off the touchscreen. Hold down to enable the keyboard into the sleeping mode. Hold down in the sleeping mode to wake it up. 9

11 Chapter 2 Getting Started The network keyboard is in inactive status when it leaves factory. You should activate it before performing other operations. Then you can log in to and log out of the keyboard. 2.1 Activating the Keyboard For the first-time access, you need to activate the keyboard by setting an admin password. No operation is allowed before activation. You can activate by the local keyboard or SADP. Step 1 Enter the password in the Set Password text field. You can only use any two or more than two combinations of upper case letters, lower case letters, numbers, and special characters. The password level hint will appear. Figure 2-1 Activation Interface STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. There are 4 levels of the password. The strength level of the password will be displayed when you enter the password. Step 2 Confirm the password in the Confirm text field. Step 3 Click Activate button to activate the keyboard. 11

12 2.1 Resetting the Keyboard Password You can reset the keyboard password by SADP. Step 1 Select the checkbox before the ID of the DS-1600KI keyboard. Step 2 Click to enter the Reset Password interface. Figure 2-2 Reset the Password Step 3 Click Export button to download the key request file. Set the file path in the pop-up window. Click Select Folder to save the device key request file on your PC. The exported key request file is XML file which is named as Device Serial No.-System Time. Step 4 Send the key request file to our technical engineers and the engineer will send you a key file back. Step 5 Select Import File radio button as the resetting mode. Step 6 Click to select the key file (XML file) returned by the technical engineer and click Open. Step 7 Enter the new password in text fields of New Password and Confirm Password. The system will judge password strength automatically, and we highly recommend you to use a strong password to ensure your data security. STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. Step 8 Click Confirm to reset the password. 12

13 2.2 Login and Logout Logging in to the Keyboard Before you operate the keyboard application, you need to log in to the keyboard. Step 1 Click to enter the Login interface. Figure 2-3 Login Interface Step 2 Click to select the account to login. Figure 2-4 Select the Account Step 3 Check to select the user account name. Step 4 Enter the password of the account. Step 5 (Optional) Check the Auto Login checkbox to enable the automatic login in future. Step 6 Click Login. If the admin enters wrong password for 7 times, the password would be locked. If the operator enters wrong password for 5 times, the password would be locked. The times of wrong password attempts by two users in 3 minutes will be overlapped. The password will be unlocked automatically in 30 minutes after being locked. 13

14 Logging out of the Keyboard After login, you can log out of the keyboard. Step 1 Click on the upper-right corner. The window box pops up as follows. Figure 2-5 Logout Interface Step 2 Click Confirm to log out. Related Operation: click to cancel the logout. 2.3 Home Page After starting up, you enter the home page which provides the access to the general settings, matrix, platform and keyboard configuration and operation. Figure 2-6 Home Page of the Keyboard 14

15 Chapter 3 General Settings You can configure the general settings of the keyboard including network, language, time and other settings. Click General on the home page for the general configuration of the keyboard to enter the General Configuration interface as shown in Figure 3.3, including Ethernet, WLAN, Language, Date & Time, Others and About. Figure 3-1 General Settings Interface Refer to Table 3.1 for the description of the General Settings interface. 27

16 Menu Ethernet WLAN Language Date & Time Others About Table 3-1 Description of General Settings Interface Descriptions Support two network configuration modes: Static IP and DHCP. Connect to available WLAN Chinese / English Set Date & Time and select Time Zone Adjust the Brightness of the screen, enable/disable the alarm sound, etc. Show the detailed information of the DS-1600KI. 3.1 Ethernet Settings You can configure Ethernet settings to connect to the network. Step 1 Click the Ethernet button on the right of the General interface to enter the Ethernet Configuration interface. Step 2 Switch the Ethernet enable button to to enable Ethernet configuration. Task 1: Configure Static IP 1) Click the Static IP enable button to to enable Static IP configuration. 2) Click Edit to enter the IP address configuration interface. 3) You can set the IP address parameters and click on the upper-left corner to save the modification. Figure 3-2 Set the Static IP Parameters Task 2: Configure DHCP 28

17 1) Click the DHCP enable button to to enable DHCP. 2) Click Details to check the IP parameters. Figure 3-3 Details of DHCP You cannot enable Static IP and DHCP at the same time. 3.2 WLAN Settings Step 1 Go to General > WLAN to enter the WLAN settings interface. Step 2 Switch the WLAN enable button to to enable automatic acquisition of WLAN information. You can obtain Wi-Fi information nearby or enter Wi-Fi information manually to add network. Figure 3-4 WLAN Configuration Interface 29

18 Step 3 Connect to the network in two ways: Connect to the available network in the list 1) Click the Wi-Fi hotspot in the Wi-Fi list. 2) Enter the password and connect to the network. Figure 3-5 Connect to Available Network Add new network 1) Click the Add Network at the bottom of the Wi-Fi list. 2) Enter the SSID manually. 3) Select the security type. Figure 3-6 Add New Network Figure 3-7 Select the Security Type 4) Enter the password to connect to the network. When you enable both the Ethernet and WLAN, the WLAN takes effect by default. 3.3 Language Settings You can choose language for the device in this section. 30

19 Step 1 Click the Language button on the right of the General interface to enter the Language Configuration interface. Step 2 Click the radio button to to select the Chinese or English language. 3.4 Date and Time Settings Figure 3-8 Language Configuration Interface You can set date and time and select time zone by configuring the parameters. Setting Date & Time Step 1 Click the Date & Time button on the right of the General interface to enter the configuration interface. 31

20 Step 2 Set the date and time in two ways. Task 1: Automatic mode Figure 3-9 Date and Time Configuration Interface Enable the automatic mode by switching to to enable the automatic time adjustment. Task 2: Manual mode 1) Click to set the date. 2) Click to set the time. 3) Click Confirm. Selecting Time Zone Figure 3-10 Date and Time Configuration Step 1 Click to select time zone in your location. 32

21 Figure 3-11 Select Time Zone 3.5 Others You can adjust the brightness of the screen, enable/disable the alarm sound and choose the resolution of the external monitor Setting the Brighntess Step 1 Click the Others button on the right navigation bar. Figure 3-12 Others Configuration Interface Step 2 Click and to adjust the brightness. You can choose in the range of 5% to 100% Setting the Alarm Sound Step 1 Click the Others button on the right navigation bar. Step 2 Set the to to turn on the alarm sound. 33

22 The alarm is supported in network disconnected, IP conflicted, USB error and FTP error conditions 34

23 4.1 Main Menu Chapter 4 Keyboard Operation and Management Step 1 On the home page, click to enter the keyboard operation interface. Step 2 Click to expand the main menu shown in the left navigation area. Figure 4-1 Main Menu Refer to Table 4.1 for the description of the main menu. 35

24 Menu Description Table 4-1 Description of Main Menu Live View Playback Device Configuration Home Local view/video wall, including the operations of PTZ control, recording, picture capturing, two-way audio, etc. Play the video of the selected camera. Display device list, manage the device/camera/group/video wall, view device information, etc. User management, Storage management and System maintenance. Return to the home page. 4.2 Device Management You can manage the devices in the Device Management section, including managing the device, camera, group and video wall. Menu Device Camera Group Video Wall Description Table 4-2 Description of Device Management Add/view/delete/modify/refresh devices View and modify the details of the channels. Add/delete/modify the groups which contains several channels. Edit the video wall name, row and column; Configure the output of the channels on video wall Managing the Devices Adding a Device by Manually Up to 8000 devices can be added by the admin. Step 1 Click Add Device. 36

25 Figure 4-2 Device Management Interface of the Admin Step 2 Enter the parameters of the device to add. Name: Edit a name for the device as desired. The name length is 32 characters at the most. The name cannot contain the special characters. Type: The type of the added device. It is not editable when you add a device. The type of the device will be shown after you add it successfully. Address: The IP address of the added device. Port: The port of the added device. User Name: Enter the user name of the added device. Password: Enter the password of the added device. Manufacturer: Select the type to PRIVATE or ONVIF. 37

26 Figure 4-3 Manual Adding Device Step 3 Click to confirm and finish the adding of device. Related Operation: you can click to cancel adding. If the entered parameters are wrong, an exception window will pop up to remind you. Adding a Device by Automatic Search Step 1 Hold down the Add Device icon for one second to enter the Auto Search interface. All the online devices in the same network segment are displayed in the list. 38

27 Figure 4-4 Auto Search Result Step 2 Check to select device (s) to add. Step 3 Click. Step 4 Enter the login user name and password of the device. Figure 4-5 Auto Adding Device Step 5 Click Confirm. Related Operation: you can click Cancel to cancel the auto-adding. When you want to add multiple devices, the user names and passwords of all the devices must be the same. 39

28 Searching the Device In the device/camera management interface, you can search the device by IP address, keywords or name to quickly search the added device/camera from the list. Step 1 Enter the device/camera management interface. Step 2 Input the IP address, keywords or name in the text field. Step 3 Click to search the device. Figure 4-6 Search Device Editing the Device In the Device Management interface, you can view and edit the details of added devices. Step 1 Click the added device in the Device Management interface. Figure 4-7 Edit the Device by the Admin 40

29 Step 2 Click Details to view the detailed information of the added devices including IP address, port, etc. The details of the added devices. Step 3 Click to modify the details of the added devices. Only Name, User Name and Password are editable. Figure 4-8 Edit the Device Step 4 Click to confirm the modification. Related Operation: you can click to cancel the modification. Controlling the Front Panel of Added DVR/NVR For the DVR/NVR which is added to the keyboard, it can realize the front panel operations of the DVR/NVR by keyboard. Step 1 Click the added DVR/NVR in the Device Management interface. Figure 4-9 Edit the Added DVR/NVR 41

30 Step 2 Select Control to enter the Remote Panel. Figure 4-10 DVR/NVR Remote Panel Step 3 Click the buttons on the control panel to control the front panel of the added DVR/NVR. Related Operation: click to exit from the DVR/NVR Control Panel Managing the Cameras You can view and edit the channel details on the Camera Management interface. Select Camera to enter the Camera Management interface. Figure 4-11 Camera Management Interface 42

31 In the search field, you can enter the keywords/name/ip address of the device and click quickly search the required device. to Viewing the Camera Step 1 Click the camera tab to view the details. Figure 4-12 View the Camera for the Admin Step 2 You can view the information of the camera including name, channel ID, protocol, stream, device, address and channel No. Name: The name of the camera as desired. Channel ID: The serial number of the camera according to the added sequence. Protocol: The transfer protocol of the camera. Stream: The stream type of the camera. Device: The name of the channel. Address: The IP address and port of the corresponding device. Channel No.: The No. of the added camera. Editing the Camera Only the admin has the permission to edit the channel. Step 1 Click to modify the details of the cameras. Only Name, Channel ID, Protocol and Stream are editable. 43

32 Figure 4-13 Edit the Camera When editing Name and Channel ID, you can click to delete the original information. The range of the Channel ID is from 1 to , and the ID cannot be repeated. Step 2 Click to select the protocol. Figure 4-14 Select the Protocol Step 3 Click to select the stream. Figure 4-15 Select the Stream Type Step 4 Click to confirm the modification. 44

33 Related Operation: you can click to cancel the modification Managing the Groups You can add the relevant cameras into the same group to make them easy to manage. E.g., you can add all the cameras of the underground garage into one group. You can add/delete/modify groups in the Group Management interface. And some other basic operations are supported, including viewing the group details, and clearing all the groups. For the admin and operators, the group management steps are the same. This section takes the operations of the admin as an example. Step 1 Select Group on the right side to enter the Group Management interface. Creating a New Group Figure 4-16 Group Management Interface You can create a new group and add some cameras in it. Step 1 Click New Group to manually create a group. 45

34 Figure 4-17 Create a New Group Name: Edit a name for the group as desired. Special characters are not allowed to enter in the Name text field. The longest length of the name is 32 characters long. Group No.: Edit the group number as desired. The range is from 1 to 16, and the No. cannot be repeated. You can add up to 64 cameras in each group and you can add up to 16 groups. Dwell Time: Edit the cycle dwell time for each channel as desired. The range is from 10s to 10000s. The default dwell time is 30s. You can click to delete the original information. The Dwell Time range is between 10s and 10000s. The default value is 30s. Step 2 Click Add Camera to add channels into the new group. Figure 4-18 Add Camera(s) to the New Group 46

35 Step 3 Select the camera(s) by clicking You can also click All to select all cameras. To deselect all cameras, click the Cancel option. Step 4 Click to go back to the New Group dialog box. Step 5 Click to finish the adding of cameras to the group. Editing the Group In the Group Management interface, you can view the group details, delete and clear the groups. Viewing and Modifying the Group Step 1 Click on the added group. Step 2 Click Details to view the detailed information of the group including name, number, cycle dwell, etc. Figure 4-19 View the Group Step 3 Click to modify the details of the selected group. Only Name, Dwell Time and Channels are editable. 47

36 Figure 4-20 Modify the Group Step 4 If you want to delete an added camera, click. Step 5 Click Add Camera to add camera(s) to the group. Step 6 Click to confirm the modification. 4.3 Live View After the device is successfully added, you can view the live video of the added network cameras or video encoders Staring Live View Step 1 Go to Live View > Local to enter the local live view interface. Step 2 Click Step 3 Check on the toolbar to expand the window division mode options. to select the window division mode. 48

37 Step 4 Select a display window. Figure 4-21 Select Window Division Mode Step 5 Select the camera to display. The following two ways are selectable: Option 1: 1) Click Keyboard. 2) Enter the camera/group No. in the numeric panel. 3) Click or to play the live video of corresponding camera or camera group on the window. Figure 4-22 Select Camera/Group 49

38 You can hold down the title bar to move the channel selection panel. Related Operations: Click to delete the entered information if you entered incorrectly. Option 2: Click or to preview the previous or next camera or group. Double-click the selected window to realize full-screen live view, or double-click in the full-screen mode to restore to the normal live view mode. 1) Click List. 2) Double click or drag the camera or group from the list to the display window to play the live video. Figure 4-23 Select Camera from List Up to 16 cameras can be selected for live view at the same time. For group, auto-switching is not supported in multi-screen mode. Enter 0 in the numeric panel and click, and you can stop the live view of the corresponding camera. Step 6 Use the toolbar to perform the following operations as demand. You can hold down the title bar to move the toolbar. 50

39 Icon Table 4-3 Description of Live View Icons Description Select the 1/4/9/16 window division. The screen will be displayed in 1-division mode by default. Stop all the live view Capturing the Picture Before you start Capture picture of the selected live view window, and save the picture to the USB disk or upload it to the FTP server. Record the video of the selected live view window, and save the video to the USB disk or upload it to the FTP server. Enable/Disable two-way audio. You can get not only the live video but also the real-time audio. View the working parameters of the camera on live view, including the IP address/port, resolution, frame rate, video encoding, etc. Connect a USB storage device to the keyboard, or ensure the network connection of the PC (running FTP server) and the keyboard is valid and correct. Run the FTP server on the PC and copy the firmware into the corresponding directory of your PC. Step 1 Enter the live view mode. Step 2 Select the playing window. Step 3 Capture the picture. The following two ways are selectable: Click to capture the picture of window. Press the center button at the top of the joystick to capture the picture PTZ Control Step 1 In the live view mode, click the floating icon to enter the PTZ control. 51

40 Figure 4-24 PTZ Control Panel The PTZ control should be supported by the added device. You can hold down the title bar to move the PTZ control panel. Step 2 Perform the pan/tilt movement; zoom in/out, wiper on/off, etc. Refer to the following table for related operations. 52

41 Icon Preset Patrol Pattern Table 4-4 Description of PTZ Control Panel Icons Description Set and call the preset. Call the patrol. Set and call the pattern. Start/stop the auto-scan. Light on/off Wiper on/off Focus control: Focus+ / Focus- Iris control: Iris+ / Iris- Setting and Calling a Preset A preset is a predefined image position which contains information of pan, tilt, zoom, focus and other parameters. Setting a Preset Step 1 In the PTZ control panel, click the Preset tab. Step 2 Use the joystick to move the camera to the desired scene. Step 3 Select a preset and click to set the preset. Up to 300 presets can be configured. Calling a Preset Step 1 Select a preset from the list. Step 2 Double click to call the preset. Calling a Patrol A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed between two presets and the dwell time at the preset separately programmable. 53

42 Before you start Set the patrol for the camera through Web Browser, client software, etc. Step 1 In the PTZ control mode, click the Patrol tab. Step 2 Select a patrol from the list. Step 3 Double click to call the patrol. Up to pre-defined 32 patrols can be called. Setting and Calling a Pattern Setting a Pattern You can record the pan/tilt movements and zoom control of the PTZ camera, and call the pattern. Step 1 In the PTZ control panel, click the Pattern tab. Figure 4-25 Set a Pattern Step 2 Select a pattern from the list. Step 3 Click to start recording of this pattern path. Step 4 Use the joystick and other buttons to control the PTZ movement. Step 5 Operate pan/tilt movements, zoom and focus control, auto-scanning, etc. Step 6 Click to stop recording of this pattern path. 54

43 Up to 4 patterns can be configured. Calling a Pattern Step 1 Select a pattern from the list. Step 2 Double click to call the pattern. 4.4 Video Wall You can view and operate the live video of the added decoding devices via video wall. The DS-1600KI keyboard supports the DS-6300DI-T, DS-6400HDI-T, DS-6500DI, DS-6900UDI, DS-B20/B21, DS-C10S, etc.. It supports the local output from DS-9000NI-I/H super NVR and window roaming on the video wall Managing the Video Wall You can configure the video wall on the Device > Video Wall interface, including editing the video wall, selecting the output channel and deleting the configured window. Figure 4-26 Video Wall Management Interface 55

44 Editing the Video Wall Layout You can edit the details of the video wall, including the name, row and column. Step 1 Click on the upper-right corner. Figure 4-27 Edit the Video Wall Name: Edit a name for the video wall as desired. Row: The row of the video wall. Column: The column of the video wall. You can click to delete the original information. The row and column should be between 1 and 8. The details will be displayed on the upper-left corner. Step 2 Click to confirm and save the settings. Step 3 (Optional) You can click to cancel editing. Configuring the Output Channel For the DS-96000NI-I/H NVR, decoding devices and MVC, you can select and configure the output channel for each video wall window. For some other video wall devices, you can get the output channels automatically. Step 1 Click the playing window on the video wall. 56

45 Figure 4-28 Select the Output Channel Step 2 Select the output channel from the list to link to the selected window. Related Operation: Hold down the configured window and click output channel. on the upper-right corner to delete the Figure 4-29 Delete the Output Channel You can open/close, move the window, and switching the images and groups through the DS-1600KI keyboard. You cannot hold down the window and click configured on the ivms-5200 client software. to delete the multi-screen display Playing Video on Video Wall Step 1 Select Video Wall in the drop-down list of live view mode. 57

46 The name of the video wall can be edited in Device > Video Wall. Step 2 Select a playing window. Step 3 Click to expand the channel list panel. Step 4 Select the camera to play it on the selected window. The following two ways are selectable: Option 1: 1) Click Keyboard. 2) Enter the camera/group No. in the numeric panel. 3) Click or to play the live video of corresponding camera or camera group on the window. Option 2: Figure 4-30 Video Wall Interface 1) Click List. 2) Double click the camera or group from the list to the display window to play the live video. You can refer to Chapter 4.3 Live View for the detailed instructions of starting the live view, PTZ control, capturing pictures, recording and two-way audio in video wall mode. 58

47 4.4.3 Smart Scaling of Video Wall For the large-scale video wall layout, you can use the smart scaling function to select and zoom in the required windows area in a convenient way. Step 1 Enter the video wall screen. Step 2 Click to access the smart scale control panel. Step 3 Touch the screen and move the blue-border frame on the select the required grids on the panel. You can adjust the frame size with fingers. Refer to the following figures to view the video wall display before and after the smart scale control. 59

48 4.4.4 Setting the Scene Figure 4-31 Smart Scaling Step 1 Start playing the video on the configured video wall layout. Step 2 Click to expand the toolbar. Step 3 Click Step 4 Select a scene in the list. to access the scene list. Step 5 Click Save to save the current video wall scene Floating and Matching the Window For the devices supporting window floating (e.g., DS-96000NI-I/H, DS-B20), you can move the playing window within the video wall as desired, close the window and adjust the window to match it with the boarders. The function must be supported by the connected decoding device before operation. Step 1 Drag a screen which links to a decoding output to open a window. Step 2 You can move the playing window within the video wall as desired and adjust its size. Figure 4-32 Window Floating Step 3 During moving the window, the dotted borders will display. You can double-click the window to adjust it to match it to the borders. 60

49 Figure 4-33 Match the Window 4.5 Playback The video files stored in the encoding device within 24 hours can be played back in the keyboard. Step 1 Click on the menu to enter the playback interface. Step 2 Click to expand the channel panel. Step 3 Set the start time and end time of the video files to play. Use the + and to adjust the month/date/year/time value. The range of start time and end time must be within 24 hours. Figure 4-34 Set Start/End Time Step 4 Select a camera to play the video on the window. The following two ways are selectable: In keyboard panel, enter the serial number in the numeric panel, and click to play video. In the list, select a camera and double click it to play the video. 61

50 Figure 4-35 Playback Step 5 You can drag the time bar to play the video of the required time. Step 6 User the toolbar to perform the following operations: You can hold down the title bar to move the toolbar. 62

51 Icon Table 4-5 Description of Playback Toolbar Description Stop playing the video. Start/pause playing the video. Slow forward at 1/2 X or 1/4 X speed. Fast forward at 2X or 4X speed. 4.6 System Configuration For the admin, you can configure the system parameters including user management, storage management and system maintenance of the keyboard. For the operator, you can only configure the user management and storage management of the keyboard User Management Multiple user accounts can be added to the system. The admin user account is assigned with the permissions, including viewing/deleting user accounts, adding devices to the users and changing the password. For the operator, you can only view the account and change the password. The keyboard can be added with 1 admin and 31 operators at most. Adding a New User by the Admin Step 1 Go to Configuration>User to enter the user management interface. 63

52 Figure 4-36 User Management Step 2 Click to enter New User interface. Step 3 Enter the user name and passwords. Figure 4-37 Add a New User STRONG PASSWORD RECOMMENDED We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. And we recommend you reset your password regularly, especially in the high security system, resetting the password monthly or weekly can better protect your product. 64

53 Step 4 Click Add Device to add device(s) to the new user. Figure 4-38 Add Device(s) to the New User Step 5 Check devices. Step 6 Click Step 7 Click to select the camera(s) from the device list. You can also click All to select all to go back to the New User interface. to save the settings. Managing the Accounts For the admin, after adding users successfully, the user account is added to the user list on the User Management interface. You can edit or delete the information of the user accounts. For the operator, you can only change the password. Editing the Admin Account Step 1 Click admin account on the User Management interface for the admin. 65

54 Figure 4-39 Edit the Admin Account Step 2 You can change the old password by entering the Old Password, New Password and confirming the password. Step 3 Click to confirm the editing. Editing the Normal User Accounts Step 1 Click the normal user account on the User Management interface for admin. Figure 4-40 Edit the Normal User Account Step 2 Click Details to edit the detailed information of the user account including password and related devices. Figure 4-41 View the User Detailed Information 66

55 Step 3 Click Set Password to set the password Figure 4-42 Set the Password Step 4 Enter the New Password and confirm the password. Step 5 Click Submit. Step 6 Back to the User Details interface and click Add Device to add device(s) to the selected user. Figure 4-43 Add Device(s) to the User Only the devices which have already been added to the admin account will be displayed in the device list. Step 7 Check to select the device(s). Step 8 Click to go back to the User Details interface. 67

56 Step 9 Click to save the settings. Logout Step 1 Click logout. on the upper-right corner of the User Management interface for the user to Step 2 Click Confirm to log out of the system Storage Management Figure 4-44 Logout Interface You can configure the FTP server parameters in Storage Management interface. You can upload captured pictures and video files to the FTP server, or save to the USB storage device. Before you start Ensure the network connection of the PC (running FTP server) and the device is valid and correct. Run the FTP server on the PC. Step 1 Go to Configuration > Storage. 68

57 Figure 4-45 Storage Management Step 2 Switch on the upper-right corner to. Step 3 Enter the Address, Folder, User Name and Password of the FTP server. Figure 4-46 Configure FTP Server You can create a new folder in the root directory of the user. Step 4 Click Apply System Maintenance For the admin user account, you can upgrade the system, import and export the configuration files, and restore the defaults of local configurations. Step 1 Go to Configuration > Maintenance. 69

58 Figure 4-47 System Maintenance Interface Step 2 Perform the following operations as demand. Upgrade: Click Browse to select the upgrade file from the USB storage device to update the system. Configure File Import: Import the configuration file from the USB storage device. Export: Export the configuration file to the USB disk. Restore (Simple): Restore the defaults of local configurations expect the network parameters and the admin password. Restore (Complete): You can restore the defaults of all the local configurations except the network parameters and the device will become inactive status. Configure Channel List Import: Import the channel inputs lists from the local storage device. Export: Export the channel inputs lists file to the local storage device and edit the channel name, etc. 70

59 Chapter 5 Access to ivms Platform DS-1600KI Network Keyboard can be accessed by ivms-5200 Integrated Surveillance Management System.. You should make proper configuration on the ivms platform before connecting the keyboard to the ivms server. Refer to the user manual of corresponding ivms platform for instructions. 5.1 Configuring ivms-5200 Integrated Surveillance Management System Platform Login Step 1 Click on the home page. Figure 5-1 Login Step 2 Enter the IP address, Port, User Name and Password of the ivms-5200 Integrated Surveillance Management System. Step 3 (Optional) Check the Auto Login checkbox to enable the automatic login in future. Step 4 Click Login. After login, you enter the main interface as follows: 71

60 5.1.2 Managing the Resources Figure 5-2 Main Menu of Platform Configuration Step 1 Click on the left navigation bar to enter the resource list interface. The resource list contains the resources configured in ivms-5200, including the video inputs, video outputs, etc. Figure 5-3 Resource List of Video Wall Step 2 Click the of a resource to enter the list of video wall scenes which are configrued on the ivms

61 Figure 5-4 Scene List Step 3 Check to select a scene and use it to the keyboard video wall. Step 4 Log in to the ivms platform, and click Logical View->Camera to enter the following interface. Figure 5-5 Camera List Step 5 Log in to the ivms-5200 and click Live View to view the screen layout. Figure 5-6 Screen Layout Interface Managing the Input Channel Step 1 Click or on the Resource interface to expand the input channel list. The number on the upper-right corner stands for the serial number of the input channel. 73

62 Figure 5-7 Resource List of Input Channel The input channel list of each level contains at most 512 input channels. Step 2 Click to return to the resource list. Step 3 You can modify the serial number of the input channel via the ivms Step 4 Click Logical View->Camera to enter the following interface to view the list of connected input channels: Figure 5-8 Camera List Step 5 Select an input channel from the list and click it to enter the Editing interface to modify the index No. in the Keyboard No. field. 74

63 Figure 5-9 Edit Camera Interface If you do not configure the serial number, you can not operate on the keyboard. The configuration method varies with different platforms. 5.2 Displaying Video on Video Wall You have two ways to display video on the video wall. Option 1: Step 1 On the interface of the input channel resource interface as shown in Figure 5-7, select a camera and click it. If you do not select the video wall first, a dialog will pop up to hint you that Invalid camera number. Please select the video wall first. If you have configured the video wall as shown in Managing the Video Wall, the Monitor Selection interface pops up. Figure 5-10 Monitor Selection Interface Step 2 Enter the monitor number in the text field to display the video of the selected camera on the selected monitor directly. Option 2: 75

64 Step 1 Click on the main menu to enter the video wall interface. Figure 5-11 Video Wall Interface Step 2 Enter the serial number of the output monitor in the numeric panel, and click. Step 3 Enter the serial number of the input channel in the numeric panel, and click. Figure 5-12 Display Video on the Selected Monitor Step 4 (Optional) You can click or to preview the live video of the previous or next input channel on the selected output monitor. 76

65 You need to drag the output monitor to the input channel layer on the video wall via the ivms platform first. Then the operation of displaying video on the video wall via the keyboard can succeed. 77

66 Chapter 6 Access to Matrix You can get access to the matrix access gateway, realize unified management of the monitors, switch the live video on the video wall and set PTZ control on the Matrix module. The PTZ control should be supported by the added device. 6.1 Matrix Access Gateway Login Step 1 Click on the home page to enter the login interface. Figure 6-1 Login Step 2 Enter the IP address, Port, User Name and Password of the matrix. Step 3 (Optional) Check the Auto Login checkbox to enable the automatic login in future. Step 4 Click Login. 6.2 Playing Video on the Video Wall After login, you can enter the Video Wall interface. You can follow the steps to view the video of an input channel on the selected monitor. Step 1 Enter the serial number of the output monitor in the numeric panel, and click. 78

67 Step 2 Select a sub-window. Enter the serial number of the input channel in the numeric panel, and click. The information of the output window and the input channel appears on the Video Wall interface. You can click to delete the entered information if you entered incorrectly. Step 3 (Optional) Click the to access the window division mode. Figure 6-2 Display Video on the Selected Window of the Monitor Step 4 (Optional) You can click or to view the live video of the previous or next input channel on the selected output window. For the specific configuration of the matrix access gateway, you can refer to the related user manual. 79

68 7.1 Specifications Chapter 7 Appendix Model DS-1600KI Operating System Android 4.4 Touchscreen Joystick Local Decoding 10.1" capacitive touchscreen Resolution: axis joystick Local decoding 2-ch at up to 1080p resolution, and up to 16-division window display Two-way Input Audio 1-ch, 3.5 mm connector (2.0Vp-p, >10kΩ) Audio Output 1-ch, 3.5 mm connector (2.0 Vp-p, 600 Ω) Network Interface WiFi 1 10M/100M/1000M self-adaptive Ethernet interface Supported USB Interface USB Video Interface Power Supply Consumption Working Temperature 1 HDMI, 1 DVI 12 VDC/POE 15W -10 C to +55 C (14ºF to 131ºF) Working Humidity 10% to 90% Dimensions (W D H) Weight mm ( inch) 1.7 Kg 80

69 7.2 Summary of Changes Version 2.1 Added: Flexible and floating control panels in live view, video wall or playback mode; Smart scale control of video wall layout; Supports DS-96000NI-I/H series NVR; Search function in device management; channel list management and live view; Import and export of channel list configuration. Version 2.0 Added: Check the decoding parameters in local live view mode. Support H.265 encoding. Playback of video within 24 hours. Select all or deselect all devices to add for the operator user account. Select all or deselect all cameras to the group. Set window-division on video wall when operating the matrix. Support 2D/3D PTZ control. Version Added: Accessible by ivms platform and matrix access gateway. Configurable by SADP; Double-click to realize full-screen live view and then double-click to restore to the normal live view mode; Control the front panel of the added DVR/NVR in device management; Optimize the PTZ control via the joystick and support 3D PTZ control; Up to 4 patterns can be configured; Connectable to multiple models of decoders and multi-screen controllers. 81

70 5