BMS compound microscopes 1

Transcription

1

2

3 BMS compound microscopes 1 BMS Basic 2 BMS 100FL & 200FL series 7 BMS 136 series 13 BMS 146 series 20 BMS EduLed series 23 BMS C0 series 30 BMS D1 series 32

4 BMS Basic BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS Basic BMS Basic Microscopes Microscope BMS 036 LED Basic Microscope BMS 3-A Two microscope types in ONE - incident and transmitted illumination microscope! This basic compound microscope is an excellent unit for starting hobbyists Eyepiece: WF10x/18 mm, locked Tube: monocular Head: fixed Nosepiece: triple Objectives: DIN achromatic 4x (NA 0,10), 10x (NA 0,25) and 40x (NA 0,65) spring loaded Stage: with 2 stage clips Focusing: coarse focussing knobs with slip clutch Condenser: fixed, N.A. 0,65 with disc diaphragm with six apertures Illumination: rotatable plano and concave mirror, Ø 50mm Supplied with: dust cover, manual, tension wrench Magnification: 40x, 100x and 400x Stand: 3/4 size Package dimension: 20 x 15 x 32 cm Mass: 1,4 kg Microscope BMS 3-A 69,00 Microscope BMS 3-AF Eyepiece: WF10x/18 mm, locked Tube: monocular Head: fixed Nosepiece: triple Objectives: DIN achromatic 4x (NA 0,10), 10x (NA 0,25) and 40x (NA 0,65) spring loaded Stage: with 2 stage clips Focussing: coarse and fine focussing knobs with slip clutch Condenser: fixed, N.A. 0,65 with disc diaphragm with six apertures Illumination: rotatable plano and concave mirror, Ø 50 mm Supplied with: dust cover, manual, tension wrench Magnification: 40x, 100x and 400x Stand: full size Package dimension: 28 x 20 x 38 cm Mass: 2,2 kg Microscope BMS 3-AF 84,00 The enhanced LED illumination combines the advantages of an incident light type with a transmission type to a handy combined microscope. The transmitted and incident light are separately operable. This microscope has a 10x wide field eye piece mounted at a 45 degree angle for comfort. The triple nosepiece features 4x, 10x, 40x objectives with a total magnification of 400x. The fixed condensor N.A. 0,65 is provided with a six aperture disc diaphragm to adjust the amount of light coming through the specimen slide. The most components such as the stand are made of sturdy plastic. Specifications: Eyepiece: WF10x/18mm, locked Tube: 45 inclined Head: monocular, fixed Focussing: coarse focussing knobs Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Stage: with 2 stage clips and slide protection Disc diaphragm: six aperture disc diaphragm Illumination: 1 LED incident and 1 LED transmitted light; incident light only suitable for the 4x and 10x objective Total magnification: 40x, 100x and 400x Powered by: 3 AA batteries Package dimension: 21 x 16 x 35 cm Mass: 1,1 kg Including: dust cover and batteries (3x AA batteries, lasting approx. 300 hours) Microscope BMS 036 LED Basic 55,00 Microscope BMS 036 LED rechargeable Powered by rechargeable batteries Eyepiece: WF10x/18mm, locked Tube: 45 inclined Head: fixed position Focussing: coarse focussing knobs with slip clutch and slide protection Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Stage: with 2 stage clips Condenser: fixed, NA 0.65 with disc diaphragm Illumination: 1 LED Magnification: 40x, 100x and 400x Powered by rechargeable batteries (3x AA batteries, lasting approx. 300 hours) Including: dust cover, manual, rechargeable batteries and battery charger Microscope BMS 036 LED rechargeable 79, Microscope BMS 036 LED Eyepiece: WF10x/18mm, locked Tube: 45 inclined Head: fixed position Focussing: coarse focussing knobs with slip clutch and slide protection Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Stage: with 2 stage clips Condenser: fixed, N.A. 0,65 with disc diaphragm Illumination: 1 LED Magnification: 40x, 100x and 400x Powered by standard batteries (3x AA batteries, lasting approx. 300 hours) Including: Dust cover, manual, batteries Microscope BMS 036 LED 69, All prices in Euro excluding transport and VAT 3

5 BMS Basic BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS Basic Microscope BMS 037 LED Two microscope types in ONE - incident and transmitted light microscope! The new BMS 037 LED is an ideal starter microscope. The microscope s stability is optimized by the robust stand and base construction. Because of its cleverly placed handle in the stand the BMS 037 LED will move effortlessly wherever you need it to be. The enhanced LED illumination combines the advantages of an incident light type with a transmission type to a handy combined microscope. The transmitted and incident light are separately operable and are adjustable by a dimmer. This microscope has a 10x wide field eye piece mounted at a 45 degree angle for comfort. The triple nosepiece features 4x, 10x, 40x objectives with a total magnification of 400x. The fixed condensor N.A. 0,65 is provided with a six aperture disc diaphragm to adjust the amount of light coming through the specimen slide. This BMS 037 LED may be a basic starter microscope but its optics are far better than you might expect from its low price. It is a very good value that will let you observe a hidden realm of detail and structure within everyday objects that is totally invisible to the unaided eye. Specifications Eyepiece: WF10x/18mm, locked Tube: 45 inclined Focussing mechanism: coarse focussing knobs Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Stage: with 2 stage clips and slide protection Condenser: fixed, N.A. 0,65 with a six aperture disc diaphragm Illumination: 1 LED incident and 1 LED transmitted light; incident light only suitable for the 40x and 100x magnification range Magnification: 40x, 100x and 400x Power supply: through 3 rechargable AA batteries 1300mA Including: dust cover, 3 rechargable AA batteries 1300mA and adapter with charge indicator Microscope BMS 037 LED Pro binocular Specifications: Eyepieces: WF10x/18mm, locked with dioptric compensation and interpupillary adjustment mm Tubes: binocular 45 inclined Focussing mechanism: coaxial coarse and fine focussing knobs Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x, 40x (spring loaded) and 100x (oil immersion, spring loaded) Mechanical stage: built-in, with low-position coaxial controls Condenser: spiral, Abbe N.A. 1.25, adjustable in height Illumination: 1 LED incident and 1 LED transmitted light; incident light only suitable for the 40x and 100x magnification range Magnification: 40x, 100x, 400x and 1000x Power supply: through 3 rechargable AA batteries 1300mA Including: dust cover, 3 rechargable AA batteries 1300mA and adapter with charge indicator Microscope BMS 037 LED Pro binocular 228, Microscope BMS 037 LED 88,00 Microscope BMS 037 LED Pro Specifications: Eyepiece: WF10x/18mm, locked Tube: monocular 45 inclined Focussing mechanism: coaxial coarse and fine focussing knobs Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x, 40x (spring loaded) and 100x (oil immersion, spring loaded) Mechanical stage: built-in, with low-position coaxial controls Condenser: spiral, Abbe N.A. 1.25, adjustable in height Illumination: 1 LED incident and 1 LED transmitted light; incident light only suitable for the 40x and 100x magnification range Magnification: 40x, 100x, 400x and 1000x Power supply: through 3 rechargable AA batteries 1300mA Including: dust cover, 3 rechargable AA batteries 1300mA and adapter with charge indicator Microscope BMS 037 LED Pro 156,00 BMS 037 series Eyepiece: WF10x/18mm, locked Eyepieces: WF10x/18mm, 2 pcs. Tube: monocular 45º inclined Tubes: binocular 45º inclined Focussing mechanism: coarse focussing knobs Focussing mechanism: coaxial coarse and fine focussing knobs Objectives: DIN achromatic 4x, 10x and 40x (SL) Objectives: DIN achromatic 4x, 10x, 40x (SL) and 100x (oil, SL) Stage: with 2 stage clips and slide protection Mechanical stage: built-in, with low-position coaxial controls Power supply: through 3 rechargable AA batteries 1300mA Price in 88,00 156,00 228, All prices in Euro excluding transport and VAT 5

6 BMS Basic BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 100FL & 200FL series BMS 100FL & 200FL series Microscopes Microscope BMS 100 FL LED CIS BMS microscope starting kit Exsisting of: 5 prepared slides 5 plain slides Cover glass Forceps Bottle of red stain Bottle of blue stain Plastic dropper Approx. 50 sheets of optical lens paper Needle Cotton stick Petri dish Self adhisive labels BMS starter kit 15, Detachable LED illuminator for BMS 3-AF with Euro power plug LED illuminator 27, Detachable illuminator 230V-15W for BMS 3-AF (75910) with euro power plug Detachable illuminator 25, Wooden storage case Wooden storage case 64, Battery rechargeable Voltage: 1.2 V Type: R06 nickel metal hydride, AA battery Dimensions: 50 x Ø 14 mm Capacity: 1300 mah Battery 1.2 V R06 NiMH 3,10 Eyepiece: WF10x/18mm with pointer, locked Tube: 45 Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse with slip clutch and fine focussing knobs with slide protection Stage: 110 x 120mm metal plan stage with 2 stage clips Condenser: fixed, N.A. 0,65 with iris diaphragm Illumination: high power LED (15-20W), adjustable Fully charged battery last up to 60 hours Magnification: 40x, 100x and 400x Including: dust cover, tension wrench, adapter, battery charger and manual Microscope BMS 100 FL LED CIS 155,00 Microscope BMS 100 FL Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse with slip clutch and fine focussing knobs with slide protection Stage: 110 x 120mm metal plan stage with 2 stage clips Condenser: fixed, N.A. 0,65 with built-in iris diaphragm and filter holder Illumination: Tungsten bulb 230V-20W Magnification: 40x, 100x and 400x Detachable power cord Including: dust cover, blue filter, tension wrench and manual Microscope BMS 100 FL 116, Digital head 1,3 megapixels Microscope BMS 100 FL LED replaces the standard head of model 037, 146 comes complete with 45 tube, however without eyepiece included software BMS_pix included USB cable Digital head 1,3 MP 199, Detachable illuminator for BMS 3-AF, UK Detachable illuminator 25, Battery rechargeable 4,6V for BMS 036 Voltage: 4.6 V Type: nickel metal hydride Dimensions: 30 x 15 mm Battery 4,6V 4,90 Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse with slip clutch and fine focussing knobs with slide protection Stage: 110 x 120mm metal plan stage with 2 stage clips Condenser: fixed, N.A with built-in iris diaphragm and filter holder Illumination: new generation power LED. Light intensity stepless adjustable through rotary potentiometer. Light output comparable with 20W halogen illumination. Lifespan: approx. 50,000 hours Magnification: 40x, 100x and 400x. Optional extendable up to 900x Power supply: V / 50 Hz. The electric circuit is protected by a fuse. Detachable power cord Including: dust cover, tension wrench and manual Microscope BMS 100 FL LED 135, Mirror for microscope BMS 3-A/3-AF diam.: 44 mm Carrying case for BMS microscope Mirror, BMS 3 A/3 AF 14, Lens tissues size: 40 x 26 x 19 cm for models 036, 037, 100FL, 136, 146, MS2 and stereo models S05 till S Carrying case 26, Lens tissues 3, All prices in Euro excluding transport and VAT 7

7 BMS 100FL & 200FL series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 100FL & 200FL series Microscope BMS 200 FL LED Eyepiece: WF10x/18mm with pointer, locked Tubes: first tube 45 inclined with eyepiece, second tube 90 without eyepiece Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse with slip clutch and fine focussing knobs with slide protection Stage: 110 x 120mm metal plan stage with 2 stage clips Condenser: fixed, N.A with built-in iris diaphragm and filter holder Illumination: new generation power LED. Light intensity stepless adjustable through rotary potentiometer. Light output comparable with 20W halogen illumination. Lifespan: approx. 50,000 hours Magnification: 40x, 100x and 400x. Optional extendable up to 900x Power supply: V / 50 Hz. The electric circuit is protected by a fuse. Detachable power cord Including: dust cover, tension wrench and manual Microscope BMS 200 FL LED 151,00 BMS 100FL Tube: 45º inclined Tubes: first tube 45º inclined with eyepiece, second tube 90º without eyepiece Illumination: power LED (15-20W), adjustable Illumination: tungsten bulb 230V-20W Illumination: new generation power LED, adjustable Battery charger: 90~240 V to 7,5 V Power supply: 230 V / 50/60 Hz. Power supply: V / 50 Hz. Detachable power cord Price in 155,00 116,00 135,00 151, Spare bulb 230V-25W, BA 15 for BMS 76010, 76021, Spare bulb 4, Mirror without base for BMS 2 and BMS 100 diam.: 42 mm Mirror without base 6, Photo adapter 27mm for BMS 200 FL Photo adapter 27mm 74, Microscope maintenance toolbox With the following content: screwdriver, Philips head, 1 screwdriver, Philips head, 2 offset screwdriver, precision screwdriver, Philips head; 2,4mm precision screwdriver, Philips head; 3mm precision screwdriver; 1,2mm precision screwdriver; 2mm allen key; 1,5mm allen key; 2mm allen key; 3mm crescent shaped wrench for friction of coarse focussing tube of grease to lubricate moving parts of microscope lens paper BMS dbox Durable plastic container with compartments, containing: preparation set: 1 forceps 1 preparation needle 1 spatula 1 seeker 1 scalpel 1 pair of scissors 1 pipette magnifiers 3x and 6x plastic Petri dishes, 80mm cover slips, 100 pieces microscope slides, 50 pieces observation beaker, 3 sections, with 2x and 3,5x magnifying glass BMS dbox 22, Microscope transport case for BMS 2 and 100, Aluminium Movable specimen holder for BMS 2/100/ maintenance toolbox 22, transport case 64, specimen holder 31, Movable specimen holder, universal Carrying case for BMS microscope size: 40 x 26 x 19 cm for models 036, 037, 100FL, 136, 146, MS2 and stereo models S05 till S Carrying case 26, Objective 4x BMS, achromatic, NA 0, Objective 4x BMS 16, specimen holder 38, All prices in Euro excluding transport and VAT 9

8 BMS 100FL & 200FL series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 100FL & 200FL series Objective 10x BMS, achromatic, NA 0,25 Objective 100x BMS, achr., NA 1,25, spring loaded and oil immersion Eyepiece WF 10x without pointer Diameter: 23,2 mm Ring to lock graticule for or Quadruple nosepiece for BMS 2/100/200 Dust cover Objective 10x BMS 24, Objective 100x BMS 64, Eyepiece WF 10x 21, Ring to lock graticule 7, Quadruple nosepiece 23, Dust cover 2, Objective 40x BMS, achr., NA 0,65, spring loaded Eyepiece H 5x Diameter: 23,2 mm Eyepiece WF 15x Diameter: 23,2 mm Eyepiece WF 15x 19, Stage micrometer graticule 1mm in 0.01mm Screwcap for objective hole Lens tissues Lens tissues 3, Objective 40x BMS 38, Eyepiece H 5x 19, Stage micrometer 22, Screwcap 0, Objective 60x BMS, achr.,na 0,80, spring loaded Eyepiece H 10x Diameter: 23,2 mm Eyepiece H 10x 21,00 Micrometer eyepiece WF10x/18 mm with built in eyepiece micrometer 10mm in 0,01mm Diameter: 23,2 mm Micrometer eyepiece 33, Immersion oil, 5ml Immersion oil, 5ml 4, Blue filter, 32mm Blue filter, 32mm 3,30 Monocular head 100FL without eyepiece Monocular head 100FL 32, Objective 60x BMS 58, Eyepiece WF 10x with pointer Diameter: 23,2 mm Eyepiece WF 10x with 24, Eyepiece micrometer 10mm in 0,01mm, diameter 19mm Eyepiece micrometer 17, Stage clip for BMS 2/100/ Stage clip 3, Blue filter, 45mm Blue filter, 45mm 3, Darkfield ring Darkfield ring for mounting in condensor BMS microscopes Diameter: 32mm Darkfield ring 6, All prices in Euro excluding transport and VAT 11

9 BMS 100FL & 200FL series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 136 series BMS 136 series Microscopes Microscope BMS 136 FLQ LED CIS Irisdiafragm for mounting under the object table Irisdiafragm 24, Battery rechargeable Voltage: 1.2 V Type: R06 nickel metal hydride, AA battery Dimensions: 50 x Ø 14 mm Capacity: 1300 mah Battery rechargeable 3, Detachable power cord with UK plug Power cord with UK plug 4,50 Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coaxial coarse and fine focussing knobs on both sides with slip clutch and slide protection Stage: with 2 stage clips Condenser: fixed, N.A. 0,65 with iris diaphragm and filter holder Illumination: 1 Super LED 0.5W (comparable with 20W halogen), adjustable LED lamp lifetime: up to hours Fully charged: last 60 hours Magnification: 40x, 100x and 400x, expandable up to 1500x Including: dustcover, batteries, manual, charger and adapter 230V-7,5V Microscope BMS 136 FLQ LED CIS 155, Microscope BMS 136 FLAsQ LED CIS Irisdiafragm (only the iris in holder) Irisdiafragm 9, Charger EUR for BMS 1-LED 230V- 7,5V/1A Charger 19, Converter EUR plug to CH Converter 4,50 Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coaxial coarse and fine focussing knobs on both sides with slip clutch and slide protection Stage: with 2 stage clips Condenser: spiral N.A. 1,25 Abbe, adjustable in height, with Iris diaphragm and filter holder Illumination: 1 Super LED 0.5W (comparable with 20W halogen), adjustable LED lamp lifetime: up to hours Fully charged: last 60 hours Magnification: 40x, 100x and 400x, expandable up to 1500x Including: dustcover, batteries, manual, charger and adapter 230V-7,5V Microscope BMS 136 FLAsQ LED CIS 165, Charger Euro for BMS 100FL, 4LED, 6,0V/500mA Charger 19, Charger UK for BMS 1-LED 230V- 7,5V/1A Charger 19,00 Microscope BMS 136 FLArQ LED CIS Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x, 40x (spring loaded) and 100x (spring loaded and oil immersion) Focussing mechanism: coaxial coarse and fine focussing knobs on both sides with slip clutch and slide protection Stage: built-in moveable specimen holder, x- and y-movement with coaxial knobs Condenser: Abbe condenser N.A. 1,25 in centrable holder, adjustable in height through rack and pinion, with iris diaphragm and filter holder Illumination: 1 Super LED 0.5W (comparable with 20W halogen), adjustable LED lamp lifetime: up to hours Fully charged: last 60 hours Magnification: 40x, 100x, 400x and 1000x, expandable up to 1500x Including: dustcover, batteries, manual, charger and adapter 230V-7,5V Microscope BMS 136 FLArQ LED CIS 215, Microscope BMS 136 FLArQ LED , All prices in Euro excluding transport and VAT 13

10 BMS 136 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 136 series Microscope BMS 136 Bino LED CIS Eyepieces: WF10x/18mm (pair), one with pointer, interpupillary distance adjustable mm Tubes: binocular, 45 inclined, Siedentopf, with dioptric compensation on left tube +/- 5 dioptres Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x, 40x (spring loaded) and 100x (spring loaded and oil immersion) Focussing mechanism: coaxial coarse and fine focussing knobs on both sides with slip clutch and slide protection Stage: built-in, mechanical stage with low-position coaxial controls, travel range: 70 x 30 mm; stage size 130 x 130 mm Condenser: Abbe condenser NA 1.25 in centrable holder, adjustable in height through rack and pinion, with iris diaphragm Illumination: 1 Super LED 0.5W (comparable with 20W halogen), adjustable LED lamp lifetime: up to hours Fully charged: last 60 hours Magnification: 40x, 100x, 400x and 1000x, expandable up to 1500x Including: dustcover, batteries, manual, charger and adapter 230V-7,5V Microscope BMS 136 Bino LED CIS 310, Microscope BMS 136 Bino LED CIS ,00 Microscope BMS 136 Trino LED CIS Eyepieces: WF10x/18mm (pair), one with pointer, interpupillary distance adjustable mm Tubes: trinocular, 45 inclined, Siedentopf, with dioptric compensation on left tube +/- 5 dioptres. Third tube for photo and video recording Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x, 40x (spring loaded) and 100x (spring loaded and oil immersio) Focussing mechanism: coaxial coarse and fine focussing knobs on both sides with slip clutch and slide protection Stage: built-in moveable specimen holder, x- and y-movement with coaxial knobs, travel range: 70 x 30 mm; stage size 130 x 130 mm Condenser: Abbe condenser NA 1.25 in centrable holder, adjustable in height through rack and pinion, with iris diaphragm and filter holder Illumination: 1 Super LED 0.5W (comparable with 20W halogen), adjustable LED lamp lifetime: up to hours Fully charged: last 60 hours Magnification: 40x, 100x, 400x and 1000x, expandable up to 1500x Detachable power cord Including: dustcover, batteries, manual, charger and adapter 230V-7,5V Microscope BMS 136 Trino LED CIS 350,00 BMS Eyepiece: WF10x/18mm with pointer Eyepieces: WF10x/18mm (pair), one with pointer Tube: 45º inclined Tubes: binocular, 45º inclined, Siedentopf Tubes: trinocular, 45º inclined, Siedentopf, Third tube for photo/video Objectives: DIN achromatic 4x, 10x and 40x Objectives: DIN achromatic 4x, 10x, 40x and 100x Objectives: DIN achromatic 4x, 10x, 40x and 60x Stage: with 2 stage clips Stage: built-in moveable specimen holder, coaxial knobs Condenser: fixed, N.A. 0,65 Condenser: spiral N.A. 1,25 Abbe Condenser: Abbe condenser N.A. 1,25 rack and pinion Illumination: 1 Super LED, adjustable Price in 155,00 165,00 215,00 215,00 310,00 310,00 350,00 350, Microscope BMS 136 Trino LED CIS , All prices in Euro excluding transport and VAT 15

11 BMS 136 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 136 series Microscope head with 3 megapixel camera for BMS Microscope head 249, Polarizer set Microscope maintenance toolbox With the following content: screwdriver, Philips head, 1 screwdriver, Philips head, 2 offset screwdriver, precision screwdriver, Philips head; 2,4mm precision screwdriver, Philips head; 3mm precision screwdriver; 1,2mm precision screwdriver; 2mm allen key; 1,5mm allen key; 2mm allen key; 3mm crescent shaped wrench for friction of coarse focussing tube of grease to lubricate moving parts of microscope lens paper maintenance toolbox 22,00 Head for BMS 136, trinocular Head supplied WITHOUT eyepieces Head for BMS , Head for BMS 136, 2x45 degrees Objective 4x, Achromatic, NA 0, Objective 4x 16, Objective 10x, Achromatic, NA 0,25 Objective 60x, Achromatic, NA 0, Objective 60x 64, Objective 100x, Achromatic, NA 1,25 Eyepiece H 12,5x Eyepiece H 12,5x 21, Eyepiece P 15x Polarizer set 59, Head for BMS , Objective 10x 30, Objective 100x 64, Eyepiece P 15x 21, Head for BMS 136, monocular Head supplied WITHOUT eyepiece. Head for BMS 136, 1x90 and 1x Darkfield ring Head for BMS ,00 Head for BMS 136 series with teaching head Tube: first tube 45 inclined, second tube 90 without eyepieces Objective 20x, Achromatic, NA 0, Eyepiece H 5x Eyepiece WF 10x without pointer Diameter: 23,2 mm Darkfield ring for mounting in condensor BMS microscopes Diameter: 32mm Head for BMS , Objective 20x 34,00 Diameter: 23,2 mm Eyepiece H 5x 19, Eyepiece WF 10x 21, Darkfield ring 6, Head for BMS 136, binocular Head supplied WITHOUT eyepieces Head for BMS , Head for BMS 136 POL, 1x90 and 1x45 Head for BMS 136 POL with teaching head Tube: first tube 45 inclined, second tube 90 without eyepieces Head for BMS 136 POL 71, Objective 40x, Achromatic, NA 0, Objective 40x 46, Eyepiece H 10x Diameter: 23,2 mm Eyepiece H 10x 21, Eyepiece WF 15x Diameter: 23,2 mm Eyepiece WF 15x 19, All prices in Euro excluding transport and VAT 17

12 BMS 136 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 136 series Eyepiece WF10x with pointer Eyepiece WF 10x 24,00 Dust cover Dust cover 2,70 Stage micrometer graticule 1mm in 0.01mm Stage micrometer 22,40 PL lamp for BMS 136 PL PL lamp 11,80 Battery rechargeable Voltage: 1.2 V Type: R06 nickel metal hydride, AA battery Dimensions: 50 x Ø 14 mm Capacity: 1300 mah Battery rechargeable 3, Eyepiece WF10x, 1x with and without pointer Eyepiece micrometer 10mm in 0,01mm, diameter 19mm Aluminium microscope case for BMS 136 Spare bulb 6V-20W, halogen for BMS 136, E1 and C1 series Carrying case for BMS microscope Eyepiece WF10x 48, Eyepiece micrometer 17,20 suitable for monoculair models microscope case 64, Spare bulb 7,70 size: 40 x 26 x 19 cm for models 036, 037, 100FL, 136, 146, MS2 and stereo models S05 till S Carrying case 26, Micrometer eyepiece WF10x/18 mm Crosshair insert disc for eyepiece BMS dbox with built in eyepiece micrometer 10mm in 0,01mm Diameter: 23,2 mm Micrometer eyepiece 33,30 Ø: 19mm Crosshair insert disc 24, Plastic microscope case for BMS 136 suitable for monoculair models microscope case 44,50 Durable plastic container with compartments, containing: preparation set: 1 forceps 1 preparation needle 1 spatula 1 seeker 1 scalpel 1 pair of scissors 1 pipette magnifiers 3x and 6x plastic Petri dishes, 80mm cover slips, 100 pieces microscope slides, 50 pieces observation beaker, 3 sections, with 2x and 3,5x magnifying glass Eyepiece P 16x Eyepiece P 16x 21, Blue filter, 32mm Ring to lock graticule for or Lens tissues BMS dbox 22, Blue filter, 32mm 3, Ring to lock graticule 7, Lens tissues 3, All prices in Euro excluding transport and VAT 19

13 BMS 146 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS 146 series BMS 146 series Microscope BMS 145 FLQ LED Eyepiece: Wide field 10x/18 mm with pointer, locked Tube: monocular, 45 inclined Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: dual segregated coarse and fine focus controls Stage: 110 x 120mm metal plan stage with slide protecton and two stage clips Condenser: fixed, NA 0.65 with iris diaphragm Illumination: new generation power LED. Light intensity continously adjustable through rotary potentiometer. Light output comparable with 20 W halogen. Life span LED: approx. 50,000 hours Magnification: 40x, 100x and 400x. Optional expandable 1500x maximum Operating voltage: 90~240 V / 50 Hz Detachable power cord Supplied with: dust cover, manual, power plug Microscope BMS 146 FLArQ LED bino Eyepieces: two wide field 10x/18mm, one with pointer. IPD adjustable Tubes: binocular, 45, Siedentopf with diopter adjustment on one tube Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with coaxial controls. XY adjustment through ergonomic arranged knobs. Condenser: rack and pinion Abbe condenser NA 1.25 with iris diaphragm, adjustable in height Illumination: new generation power LED 1 W. Light intensity continously adjustable through rotary potentiometer. Light output comparable with 20 W halogen. Life span LED: approx. 50,000 hours Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Operating voltage: 90~240 V / 50 Hz Detachable power cord Supplied with: dust cover, manual, power cord Microscope BMS 145 FLQ LED 135, Microscope BMS 146 FLArQ LED BINO 275, Microscope BMS 146 FLAsQ LED Microscope BMS 146 FLArQ LED trino Eyepiece: Wide field 10x/18mm with pointer, locked Tube: monocular, 45 inclined Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: dual coaxial coarse and fine focus controls Stage: 110 x 120mm metal plan stage with slide with two stage clips Condenser: spiral mounted 1.25 NA Abbe condenser with built-in iris diaphragm, adjustable in height Illumination: new generation power LED 1 W. Light intensity continously adjustable through rotary potentiometer. Light output comparable with 20 W halogen. Life span LED: approx. 50,000 hours Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Operating voltage: 90~240 V / 50 Hz Detachable power cord Supplied with : dust cover, manual, power cord Microscope BMS 146 FLAsQ LED 149,00 Microscope BMS 146 FLArQ LED mono Eyepieces: two Wide field 10x/18mm, one with pointer. IPD adjustable Tubes: trinocular, 45, Siedentopf with diopter adjustment on one tube. Third tube for photo- and videorecording. Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with coaxial controls. XY adjustment through ergonomic arranged knobs. Condenser: rack and pinion Abbe condenser NA 1.25 with iris diaphragm, adjustable in height Illumination: new generation power LED 1 W. Light intensity continously adjustable through rotary potentiometer. Light output comparable with 20 W halogen. Life span LED: approx. 50,000 hours Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Operating voltage: 90~240 V / 50 Hz Detachable power cord Supplied with: dust cover, manual, power cord Microscope BMS 146 FLArQ LED TRINO 325, Eyepiece: Wide field 10x/18mm with pointer, locked Tube: monocular, 45 Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with coaxial controls. XY adjustment through ergonomic arranged knobs. Condenser: rack and pinion Abbe condenser NA 1.25 with iris diaphragm, adjustable in height Illumination: new generation power LED 1 W. Light intensity continously adjustable through rotary potentiometer. Light output comparable with 20 W halogen. Life span LED: approx. 50,000 hours Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Operating voltage: 90~240 V / 50 Hz Detachable power cord Supplied with: dust cover, manual, power cord Microscope BMS 146 FLArQ LED MONO 199,00 Teaching head Tube: one tube 45 inclined and one tube 90 Without eyepieces Teaching head 55,00 Digital head 1.3 megapixel mounted instead of standard head comes complete with 45 tube, however without eyepiece Camera: 1/3 CMOS with DSP Resolution: 1280x1024 pixels (horizontal/vertical) Frame rate: 15fps at 1280x1024 pixels; 30fps at 640x480 pixels Pixels: 1,350,000 Digital port: USB 2.0 Software: BMS_pix USB cable: 1,5 meter Digital head 1.3 megapixel 199, All prices in Euro excluding transport and VAT 21

14 BMS 146 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS EduLed series Digital head 3 megapixels BMS EduLed series Microscopes mounted instead of the standard head comes complete with 45 tube, without eyepiece easy to mount in place where the standard head is normally situated Digital port: USB 2.0 Software: BMS_pix USB cable: 1,5 meter Microscope BMS EduLed FLQ The BMS EduLed microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. Rechargeable batteries enable the BMS EduLed to function also as a portable field microscope Digital head 3 megapixels 254,00 The transmitted light illumination of BMS EduLed FLQ is performed by a LED with dimmer (for continuous variation of light intensity) and a fixed condenser with iris diaphragm. The BMS EduLed microscope is equipped with three DIN achromatic Semi Plan objectives (4x, 10x and 40x). With the 10x wide field eyepiece you get a total magnification range of 40x-400x. The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable monocular viewing, coaxial coarse and fine focusing drive and a stage with two stage clips. Eyepiece: Wide field 10x/18mm with pointer, locked, with eyecups. Tube: monocular, 45 inclined through ball bearing Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 40x (spring loaded).optional 60x or 100x Focussing: dual coaxial coarse and fine focus controls Stage: 110 x 120mm metal plan stage with slide protection and two stage clips Condenser: fixed, N.A with iris diaphragm Illumination: power LED (comparable with 20W halogen), adjustable Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Supplied with: dust cover, manual, 3x AA rechargeable batteries 1300mA, battery charger 7,5V adapter Microscope BMS EduLed FLQ 175, Microscope BMS EduLed FLAsQ The BMS EduLed microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. Rechargeable batteries enable the BMS EduLed to function also as a portable field microscope. The transmitted light illumination of BMS EduLed FLAsQ is performed by a LED with dimmer (for continuous variation of light intensity) and a height-adjustable spiral condenser with iris diaphragm. This allows the instrument to have not only the usual 4x, 10x and 40x objective but also the 100x oil immersion objective. These all are DIN achromatic Semi Plan objectives. With the 10x wide field eyepiece you get a total magnification range of 40x-400x (optional 600x and/or 1000x). The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable monocular viewing, coaxial coarse and fine focusing drive and a stage with two stage clips. With useful accessories you can build this microscope into a more powerful system. Eyepiece: Wide field 10x/18mm with pointer, locked, with eyecups Tube: monocular, 45 inclined with ball bearing movement Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 40x (spring loaded). Optional 60x or 100x Focussing mechanism: dual coaxial coarse and fine focus controls Stage: 110 x 120mm metal plan stage with slide protection and two stage clips Condenser: spiral mounted 1.25 N.A. Abbe condenser with iris diaphragm, adjustable in height Illumination: power LED (comparable with 20W halogen), adjustable Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Supplied with: dust cover, manual, 3x AA rechargeable batteries 1300mA, battery charger 7,5V adapter Microscope BMS EduLed FLAsQ 185, All prices in Euro excluding transport and VAT 23

15 BMS EduLed series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS EduLed series Microscope BMS EduLed FLArQ MONO Microscope BMS EduLed FLArQ TRINO The BMS EduLed microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. Rechargeable batteries enable the BMS EduLed to function also as a portable field microscope. The BMS EduLed microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. Rechargeable batteries enable the BMS EduLed to function also as a portable field microscope. The transmitted light illumination of BMS EduLed FLArQ is performed by a LED with dimmer (for continuous variation of light intensity) and a height-adjustable Abbe condenser with iris diaphragm. This allows the instrument to have not only the usual 4x, 10x and 40x objective but also the 100x oil immersion objective. These all are DIN achromatic Semi Plan objectives. With the 10x wide field eyepiece you get a total magnification range of 40x-400x (optional 600x and/or 1000x). The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable monocular viewing, coaxial coarse and fine focusing drive and a mechanical stage which has ergonomic arranged coaxial controls for easy handling. The transmitted light illumination of BMS EduLed FLArQ is performed by a LED with dimmer (for continuous variation of light intensity) and a height-adjustable Abbe condenser with iris diaphragm. This allows the instrument to have not only the usual 4x, 10x and 40x objective but also the 100x oil immersion objective. These all are DIN achromatic Semi Plan objectives. With the two 10x wide field eyepieces you get a total magnification range of 40x-400x (optional 600x and/or 1000x). The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable trinocular viewing, coaxial coarse and fine focusing drive and a mechanical stage which has ergonomic arranged coaxial controls for easy handling With useful accessories you can build this microscope into a more powerful system. Eyepiece: Wide field 10x/18mm with pointer, locked, with eyecups. Tube: monocular, 45 inclined with ball bearing movement Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 40x (spring loaded). Optional 60x or 100x Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with ergonomic arranged coaxial controls Condenser: rack and pinion Abbe condenser N.A with iris diaphragm, adjustable in height Illumination: power LED (comparable with 20W halogen), adjustable Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Supplied with: dust cover, manual, 3x AA rechargeable batteries 1300mA, battery charger 7,5V adapter Microscope BMS EduLed FLArQ MONO 244,00 Microscope BMS EduLed FLArQ BINO With useful accessories you can build this microscope into a more powerful system. Eyepieces: two Wide field 10x/18mm, one with pointer, locked, with eyecups, IPD adjustable Tubes: trinocular, 45 inclined, Siedentopf with dioptric compensation on one tube. Third tube for photo- and videorecording with ball bearing movement Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 40x (spring loaded). Optional 60x or 100x Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with ergonomic arranged coaxial controls Condenser: rack and pinion Abbe condenser N.A with iris diaphragm, adjustable in height Illumination: power LED (comparable with 20W halogen), adjustable Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Supplied with: dust cover, manual, 3x AA rechargeable batteries 1300mA, battery charger 7,5V adapter Microscope BMS EduLed FLArQ TRINO 364, The BMS EduLed microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. Rechargeable batteries enable the BMS EduLed to function also as a portable field microscope CP Microscope BMS EduLed FLQ MONO, 230 V 175,00 The transmitted light illumination of BMS EduLed FLArQ is performed by a LED with dimmer (for continuous variation of light intensity) and a height-adjustable Abbe condenser with iris diaphragm. This allows the instrument to have not only the usual 4x, 10x and 40x objective but also the 100x oil immersion objective. These all are DIN achromatic Semi Plan objectives. With the two 10x wide field eyepieces you get a total magnification range of 40x-400x (optional 600x and/or 1000x). The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable binocular viewing, coaxial coarse and fine focusing drive and a mechanical stage which has ergonomic arranged coaxial controls for easy handling CP Microscope BMS EduLed FLAsQ MONO, 230 V 185, CP Microscope BMS EduLed FLArQ MONO, 230 V 244, CP Microscope BMS EduLed FLArQ BINO, 230 V 334,00 With useful accessories you can build this microscope into a more powerful system. Eyepieces: two Wide field 10x/18mm, one with pointer, locked, with eyecups, IPD adjustable Tubes: binocular, 45 inclined, Siedentopf with dioptric compensation on one tube with ball bearing movement Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 40x (spring loaded). Optional 60x or 100x Focussing mechanism: dual coaxial coarse and fine focus controls Stage: built-in mechanical stage with ergonomic arranged coaxial controls Condenser: rack and pinion Abbe condenser N.A with iris diaphragm, adjustable in height Illumination: power LED (comparable with 20W halogen), adjustable Magnification: 40x, 100x and 400x, optional expandable 1500x maximum Supplied with: dust cover, manual, 3x AA rechargeable batteries 1300mA, battery charger 7,5V adapter CP Microscope BMS EduLed FLArQ TRINO, 230 V 364, Microscope BMS EduLed FLArQ BINO 334, All prices in Euro excluding transport and VAT 25

16 BMS EduLed series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS EduLed series BMS EduLed Eyepiece: WF10x/18mm with pointer CP CP CP CP CP Microscope head with 3 megapixel camera for BMS EduLed DIN achromatic Semi Plan objective 10x, 0, DIN achromatic Semi Plan objective 100x (oil ), NA 1,25 Eyepieces: WF10x/18mm (pair), one with pointer Microscope head 254, Semi Plan objective 24, Semi Plan objective 25,00 Tube: 45º inclined Tubes: binocular, 45º inclined, Siedentopf Tubes: trinocular, 45º inclined, Siedentopf, Third tube for photo/ video Objectives: DIN Semi Plan 4x, 10x and 40x Focussing mechanism: dual coaxial coarse and fine focus controls Stage: with 2 stage clips Polarisation set BMS EduLed Polarisation set 59, DIN achromatic Semi Plan objective 40x, NA 0, Semi Plan objective 25, Dual view BMS EduLed, 1x90 & 1 x 45 Head with dual viewing, Tube: first tube 45 inclined, second tube 90 Without eyepieces ,00 Stage: built-in moveable specimen holder, coaxial knobs Condenser: fixed, N.A. 0, Darkfield ring Condenser: spiral N.A. 1,25 Abbe Condenser: Abbe condenser N.A. 1,25 rack and pinion Illumination: 1 Super LED, adjustable Darkfield ring for mounting in condensor BMS microscopes Diameter: 32mm Darkfield ring 6, DIN achromatic Semi Plan objective 60x (spring loaded), NA 0, Mono head BMS EduLed without eyepieces Cordless, 3x AA batterie and 7,5 V charger Semi Plan objective 25, ,00 90~240V input with detacheble power cord Price in Euro s 175,00 185,00 244,00 334,00 364,00 175,00 185,00 244,00 334,00 364, DIN achromatic Semi Plan objective 4x, NA 0, objective 4x 22, All prices in Euro excluding transport and VAT 27

17 BMS EduLed series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS EduLed series Rubber eyecup for BMS EduLed Bino head BMS EduLed Microscope storage case, aluminium Immersion oil, 5ml Cell phone holder for Digitube without eyepieces Bino head 65, Rubber eyecup 0,80 Dimensions including lid (wxdxh): 325 mm x 275 mm x 530 mm Dimensions excluding lid (wxdxh): 325 mm x 275 mm x 450 mm Suitable: EduLed, D1, C0, C1, C2, D1, Stereo range 11 till storage case 82, Immersion oil, 5ml 4,00 Upgrade your Digitube adapter with this special phone holder and take pictures right away with your iphone or cell phone. Materials: ABS, alloy of aluminium Weight: 100 g Cell phone holder 17, Trino head BMS EduLed without eyepieces Charger EUR for BMS 1-LED 230V- 7,5V/1A Lens tissues Trino head 79, Charger EUR 19, Battery rechargeable Lens tissues 3,10 Spare LED for EduLed Voltage: 1.2 V Type: R06 nickel metal hydride, AA battery Dimensions: 50 x Ø 14 mm Capacity: 1300 mah Spare LED 12, Battery rechargeable 3, Eyepiece WF10x with pointer BMS EduLed Diameter: 23,2 mm Eyepiece WF10x 35, Eyepiece WF10x without pointer BMS EduLed Charger UK for BMS 1-LED 230V- 7,5V/1A Charger UK 19, Micrometer eyepiece WF10x/18 mm Screwcap for objective hole Screwcap 0,60 Universal Digitube adapter Finally a solution to connect almost any digital photo camera to a microscope, stereomicroscope or field scope. No hassle with certain types of cameras and the specific use of digital adapters, with or without compensation optics! Just mount the camera on the camera platform to be moved into the X and Y direction to position the camera in line with the eyepiece. Suitable eyepiece size: 28 ~ 45 mm (Ø) Platform load: max. 2.0 kg Materials: ABS, alloy of aluminium Height: 195 mm Weight: 350 g ,50 Diameter: 23,2 mm Eyepiece WF10x 29,00 with built in eyepiece micrometer 10mm in 0,01mm Diameter: 23,2 mm Micrometer eyepiece 33, All prices in Euro excluding transport and VAT 29

18 BMS C0 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS C0 series BMS C0 series Microscope BMS C0-211 Monocular with Semi Plan objectives Microscopes from the range BMS C0 are characterised by their robust design, good mechanical and optical quality. Monocular microscope Eyepiece: Widefield 10x/18mm Tube: monocular, 30 inclined Nosepiece: quadruple Objectives: DIN Semi Plan 4x, 10x, 40x (spring loaded) and 100x (spring loaded, oil immersion) Focussing mechanism: coaxial coarse and fine focusing knobs with built-in tension adjustment and focus stop for preventing damage to slides and objectives Stage: built-in mechanical stage 132mm x 142mm, moving range 50mm x 76mm with specimen holder, controlled by coaxial knobs at low position Condenser: rack and pinion 1,25 Abbe condenser with iris diaphragm and filter holder Illumination: Halogen bulb 6V/20W adjustable Input power: 85V-265V/50Hz Total magnification: 40x, 100x, 400x and 1000x Detachable power cord Supplied with: dust cover, blue filter and manual Microscope BMS C ,00 Microscope BMS C0-223 Trinocular with Semi Plan objectives Microscopes from the range BMS C0 are characterised by their robust design, good mechanical and opticalquality. Trinocular microscope Eyepieces: 2x Widefield 10x/18mm Tube: trinocular, 30 inclined, IPD range: mm, diopter adjustment: +/- 5 D both sides Nosepiece: quadruple Objectives: DIN Semi Plan 4x, 10x, 40x (spring loaded) and 100x (spring loaded and oil immersion) Focusing mechanism: coaxial coarse and fine focussing knobs with built-in tension adjustment and focus stop for preventing damage to slides and objectives Stage: built-in mechanical stage 132mm x 142mm, XY-travel range 76 x 50 mm with specimen holder, controlled by coaxial knobs at low position Condenser: rack an pinion NA 1.25 Abbe with iris diaphragm and filter holder Illumination: Halogen bulb 6V/20W adjustable Input power: 85V-265V/50Hz Total magnification: 40x, 100x, 400x and 1000x Detachable power cord Supplied with: dust cover, blue filter and manual Microscope BMS C ,00 BMS C Microscope BMS C0-220 Binocular with Semi Plan objectives Eyepiece: Widefield 10x/18mm Microscopes from the range BMS C0 are characterised by their robust design, good mechanical and opticalquality. Binocular microscope Eyepieces: 2x Widefield 10x/18mm Tube: binocular, 30 inclined, IPD range: mm, diopter adjustment: +/- 5 D both sides Nosepiece: quadruple Objectives: DIN Semi Plan 4x,10x, 40x (spring loaded) and 100x (spring loaded, oil immersion) Focussing mechanism: Coaxial coarse and fine focusing knobs with built-in tension adjustment and focusstop for preventing damage to slides and objectives Stage: Built-in mechanical stage 132mm x 142mm, moving range 50mm x 76mm with specimen holder, controlled by coaxial knobs at low position Condenser: Rack and pinion 1,25 Abbe condenser with iris diaphragm and filter holder Illumination: Halogen bulb 6V/20W adjustable Input power: 85V-265V/50Hz Total magnification: 40x, 100x, 400x and 1000x Detachable power cord Supplied with: dust cover, blue filter and manual Eyepieces: 2x Widefield 10x/18mm Tube: monocular, 30º inclined Tube: binocular, 30º inclined Tube: trinocular, 30 inclined, hird tube for photo/video Objectives: DIN Semi Plan 4x, 10x, 40x and 100x Stage: built-in mechanical stage with specimen holder Condenser: rack and pinion 1,25 Abbe Illumination: Halogen bulb 6V/20W adjustable Input power: 85V-265V/50Hz Microscope BMS C ,00 Price in Euro s 300,00 350,00 400, All prices in Euro excluding transport and VAT 31

19 BMS D1 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS D1 series BMS D1 series Microscopes 600x magnification 1000x magnification Microscope BMS D1-211A monocular Microscope BMS D1-211A monocular The BMS D1 microscope has high resolution objectives and a wide field (WF) eyepiece with plan optics. The optics allow the user to view colourful, high contrast, clear images. The stability of the microscope is guaranteed by the solid design of the stand and its base. The stand also has a wide window on the rear. The BMS D1 microscope is equipped with a large stage and an integrated movable specimen holder. The large working surface, 140 x 150 mm, easily allows two slides at once. The integrated X-Y specimen holder is easy to use thanks to the ergonomically placed coaxial controls. The Abbe condenser comes complete with a slot for inserting various accessories such as dark field or phase contrast sliders. The condenser can be adjusted in height using the rack and pinion system. All optical surfaces (eyepiece and objectives) are coated with an anti-fungus layer. The new generation LED illumination gives comfort and rest to the eye. The spectrum of the LED is equal to that of natural day light and is adjustable in intensity. The LED light source is comparable to a 30W halogen light source. Eyepiece: WFP 10x / 18mm with foldable eye cups Tube: 45 inclined, 160 mm tube length, with grub screw to lock in the eyepiece Head: monocular, 360 rotatable, with lock bolt and milled edged screw Nosepiece: quintuple, ball bearing type with rubber grip Objectives: DIN achromatic high resolution, 4x (N.A. 0.10), 10x (N.A. 0.25), 40x (N.A. 0.65), 60x (N.A. 0.85). The 40x and 60x objectives are spring loaded (for slide protection) Focusing: coaxial coarse and fine adjustment on both sides. Fine adjustment is supplied with a scale division. Each division equals mm (0.30 mm/rotation) Stage: 140 x 150 mm, suitable for two slides at one time. Equipped with integrated movable specimen holder with ergonomically placed coaxial controls for accurate X-Y movement. Range 77 x 52 mm Condenser: Abbe condenser (N.A. 1.25) in holder, with centering screws. Adjustable height via rack and pinion. With iris diaphragm (0-100% adjustable). With slot for inserting various accessories, e.g. dark field or phase contrast sliders (optional) Illumination: new generation LED (3 Watt). Light intensity is continuously variable by means of potentiometer. Intensity comparable with 30W halogen Life span LED: approx. 50,000 hours Magnification: 40x, 100x, 400x and 600x. Optional to be extended to 2000x Voltage: 90 ~ 240 V / 50 Hz. The electric circuit is protected by a dual fuse system Detachable power cord Supplied with: dust cover and user manual The BMS D1 microscope has high resolution objectives and a wide field (WF) eyepiece with plan optics. The optics allow the user to view colourful, high contrast, clear images. The stability of the microscope is guaranteed by the solid design of the stand and its base. The stand also has a wide window on the rear. The BMS D1 microscope is equipped with a large stage and an integrated movable specimen holder. The large working surface, 140 x 150 mm, easily allows two slides at once. The integrated X-Y specimen holder is easy to use thanks to the ergonomically placed coaxial controls. The Abbe condenser comes complete with a slot for inserting various accessories such as dark field or phase contrast sliders. The condenser can be adjusted in height using the rack and pinion system. All optical surfaces (eyepiece and objectives) are coated with an anti-fungus layer. The new generation LED illumination gives comfort and rest to the eye. The spectrum of the LED is equal to that of natural day light and is adjustable in intensity. The LED light source is comparable to a 30W halogen light source. Eyepiece: WFP 10x / 18mm with foldable eye cups Tube: 45 inclined, 160 mm tube length, with grub screw to lock in the eyepiece Head: monocular, 360 rotatable, with lock bolt and milled edged screw Nosepiece: quintuple, ball bearing type with rubber grip Objectives: DIN achromatic High Resolution, 4x (N.A. 0.10), 10x (N.A. 0.25), 40x (N.A. 0.65), 100x (N.A. 1.25) oil immersion. The 40x and 100x objectives are spring loaded (for slide protection) Focusing: coaxial coarse and fine adjustment on both sides. Fine adjustment is supplied with a scale division. Each division equals mm (0.30 mm/rotation) Stage: 140 x 150 mm, suitable for two slides at one time. Equipped with integrated movable specimen holder with ergonomically placed coaxial controls for accurate X-Y movement. Range 77 x 52 mm Condenser: Abbe condenser (N.A. 1.25) in holder, with centering screws. Adjustable height via rack and pinion. With iris diaphragm (0-100% adjustable). With slot for inserting various accessories, e.g. dark field or phase contrast sliders (optional) Illumination: new generation LED (3 Watt). Light intensity is continuously variable by means of potentiometer. Intensity comparable with 30W halogen Life span LED: approx. 50,000 hours Magnification: 40x, 100x, 400x and 600x. Optional to be extended to 2000x Voltage: 90 ~ 240 V / 50 Hz. The electric circuit is protected by a dual fuse system Detachable power cord Supplied with: dust cover and user manual Microscope BMS D1-211A monocular 349, Microscope BMS D1-220A binocular 425, Microscope BMS D1-211A monocular 349, Microscope BMS D1-220A binocular 425, Microscope BMS D1-223A trinocular 475, Microscope BMS D1-211ePlan monocular 425, Microscope BMS D1-223A trinocular 475, Microscope BMS D1-220ePlan binocular 499, Microscope BMS D1-211ePlan monocular 425, Microscope BMS D1-223ePlan trinocular 549, Microscope BMS D1-220ePlan binocular 499, Microscope BMS D1-211Plan monocular 549, Microscope BMS D1-223ePlan trinocular 549, Microscope BMS D1-220Plan binocular 649, Microscope BMS D1-211Plan monocular 549, Microscope BMS D1-223Plan trinocular 699, All prices in Euro excluding transport and VAT 33

20 BMS D1 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS D1 series BMS D1, 1000x Eyepiece: WFP 10x / 18mm with foldable eye cups (2x) (2x) (2x) (2x) Eyepiece: WFP 10x / 20mm with foldable eye cups (2x) (2x) Head: monocular, 360 rotatable Head: binocular, 360 rotatable Head: trinocular, 360 rotatable Objectives: DIN achromatic, 4x, 10x, 40x, 100x Objectives: DIN eplan, 4x, 10x, 40x, 100x Objectives: DIN Plan, 4x, 10x, 40x, 100x Illumination: new generation LED (3 Watt) Illumination: Köhler new generation LED (3 Watt) Voltage: 90 ~ 240 V / 50 Hz. BMS D1, 600x Price in 349,00 425,00 475,00 425,00 499,00 549,00 549,00 649,00 699,00 Eyepiece: WFP 10x / 18mm with foldable eye cups (2x) (2x) (2x) (2x) Eyepiece: WFP 10x / 20mm with foldable eye cups Head: monocular, 360 rotatable Head: binocular, 360 rotatable Head: trinocular, 360 rotatable Objectives: DIN achromatic, 4x, 10x, 40x, 60x Objectives: DIN eplan, 4x, 10x, 40x, 60x Objectives: DIN Plan, 4x, 10x, 40x, 60x Illumination: new generation LED (3 Watt) Illumination: Köhler new generation LED (3 Watt) Voltage: 90 ~ 240 V / 50 Hz. Price in 349,00 425,00 475,00 425,00 499,00 549,00 549, All prices in Euro excluding transport and VAT 35

21 BMS D1 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS D1 series Polarizing kit BMS D1 Designed for D1 Achromat, eplan and Plan Polarizing kit BMS D1 169, Photo adapter for BMS D1 223 trinocular T2-ring for photo camera not included Photo adapter 109,00 Darkfield slider for BMS D1 Slider has two apurtures. One for the darkfield and one for brightfield use Darkfield slider 125, Darkfield slider for BMS D1 Köhler Slider consists of two apertures. One for darkfield and one for standard view. 4x - 40x Darkfield slider 109,00 Phase kit 20x/100x Phase Kit comprising of: Phase objective Ph20x Phase objective Ph100x Phase slider 20x/100x Phase telescope Phase kit 20x/100x 499, EPI-fluorescence attachment The epi-illumination is through 100 Watt high pressure mercury lamp. The lamphousing is attached to the fluorescence filter block. The exciting light spectrum range is 350mm - 580mm. The fluorescent light spectrum range 420mm - 650mm Centering eyepiece 10x for BMS D Centering eyepiece 55, Binocular observation head (20mm) for BMS D1 45 inclined for use of D1 microscopes with Plan objectives and eyepieces 20mm excluding eyepieces observation head 189,00 Trinocular observation head (18mm) for BMS D1 for use of D1 microscopes with achromatic or eplan objectives and eyepieces 18mm excluding eyepieces observation head 205, Binocular observation head (18mm) for BMS D1 45 inclined for use of D1 microscopes with achromatic or eplan objectives and eyepieces 18mm excluding eyepieces observation head 179,00 BMS D1 digital binocular head 3 megapixels The digital head can only be mounted on the BMS D1 bino and trino version. Binocular head with built-in 3 megapixels camera Complete with measure software Photolib Delivery without eyepiecesspecifications camera Camera: built into the binocular head CCD sensor: 1/4 Colour CMOS sensor with DSP Effective pixels: 2048 x 1536 Pixels: Scanning system: Progressive scan Dynamic range: >62 db Sensitivity: 1.0 lux Frame rate: x 960 Electronic control: exposure, white balance and gain Iris diaphragm: automatic Communication protocol: USB v2.0 Operating system requirement: Windows XP (SP2/3), Vista or W7Including: USB-cable, software CD (BMS PhotoLib) digital binocular head 499, Video adapter BMS D1 for 1/2 inch camera Video adapter has 0,5x lens system for use of camera with 1/2 inch sensor Video adapter 119, Phase kit 10x/40x Phase Kit comprising of: Phase objective Ph10x Phase objective Ph40x Phase slider 10x/40x Phase telescope Phase kit 10x/40x 475,00 Technical Features Two exciting light waves B (blue light) and G (green light) Comprising of : exciting filter (EX) Comprising of: Blue light (EX-490) Green Light (EX-545) Colour Separation Prism (DM) Comprising of: Blue Light (BA530) Green Light (BA590) Position of ordinary transmission light (Central) Fluorescent Objectives 4x, 10x, 40x & 100x Illumination box with power supply unit 220 Volt or 110 volt & HBO, super high - pressured spherical mercury vapour lamp 100W. Orange coloured plastic screen to safeguard the operator from UV light , Trinocular observation head (20mm) for BMS D1 for use of D1 microscopes with Plan objectives and eyepieces 20mm excluding eyepieces observation head 209, Monocular observation head (18mm) for BMS D1 45 inclined for use of D1 microscopes with achromatic or eplan objectives and eyepiece 18mm excluding eyepiece Eyepiece WFP 10x/18mm for BMS D1 with foldable eye guard Eyepiece WFP 60, observation head 55,00 Video adapter BMS D1 for 1/3 inch camera Video adapter has 0,35x lens system for use of camera with 1/3 inch sensor Eyepiece WFP 10x/20mm for BMS D1 with foldable eye guard Video adapter 119, Eyepiece WFP 75, All prices in Euro excluding transport and VAT 37

22 BMS D1 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS D1 series Eyepiece WFP 15x for BMS D1 with foldable eye guard Eyepiece WFP 60,00 Eyepiece WFP 10x/20mm for BMS D1 with micrometer with foldable eye guard Eyepiece WFP 75,00 Objectief 10x, achromatisch voor BMS D Objective 10x 30,00 Objective 60x, achromatic for BMS D1 spring loaded dry version Objective 60x 65,00 Objective 20x, eplan for BMS D Objective 20x 145,00 Objectief 4x, Plan voor BMS D Objective 4x 55, Eyepiece WFP 20x for BMS D Objective 40x, eplan for BMS D1 Objectief 10x, Plan voor BMS D1 with foldable eye guard Eyepiece WFP 72,00 Rubber eyecup for BMS D Rubber eyecup 1,75 Objectief 20x, achromatisch voor BMS D1 Objective 100x, achromatic for BMS D1 spring loaded oil version spring loaded Objective 40x 80, Objective 10x 75, Objective 20x 40, Objective 100x 65, Eyepiece WFP 10x/20mm for BMS D Objective 60x, eplan for BMS D1 Objectief 20x, Plan voor BMS D1 with pointer with foldable eye guard Eyepiece WFP 80,00 Dustcover BMS D Dustcover BMS D1 6, Objective 40x, achromatic for BMS D1 spring loaded Objectief 4x, eplan voor BMS D1 spring loaded Objective 60x 120, Objective 20x 145, Objective 40x 50, Objective 4x 40, Eyepiece WFP 10x/18mm for BMS D1 with micrometer with foldable eye guard Eyepiece WFP 75, Objectief 4x, achromatisch voor BMS D Objective 4x 25, Objectief 10x, eplan voor BMS D Objective 100x, eplan for BMS D1 spring loaded oil version Objective 100x 120, Objective 40x, Plan for BMS D1 spring loaded Objective 40x 150, Objective 10x 50, All prices in Euro excluding transport and VAT 39

23 BMS D1 series BMS compound microscopes CHAPTER 1 CHAPTER 1 BMS compound microscopes BMS D1 series Objective 60x, Plan for BMS D1 spring loaded Objective 60x 190, Objective 100x, Plan for BMS D1 spring loaded oil version Microscope maintenance toolbox With the following content: screwdriver, Philips head, 1 screwdriver, Philips head, 2 offset screwdriver, precision screwdriver, Philips head; 2,4mm precision screwdriver, Philips head; 3mm precision screwdriver; 1,2mm precision screwdriver; 2mm allen key; 1,5mm allen key; 2mm allen key; 3mm crescent shaped wrench for friction of coarse focussing tube of grease to lubricate moving parts of microscope lens paper maintenance toolbox 22,00 Heated stage for BMS C-, D1-, EduLed and 136-series The BMS heated stage will fit almost any microscope as a temporary feature. The unit consists of a heated flat plate with central hole for transmitted illumination. The heating is by transformer and can be controlled accurately to within 1 degree which is displayed by digital readout up to a maximum of 50 C. An excellent unit for seminology and related techniques and available at an extremely cost effective price. Range: digital temp. control Set temp: in 1 increments Display: actual temp in 0.1 increments Accurate +/- 0,5 C Power: switchable 110V/230V-50Hz Including: mounting tape for the stage Heated stage 275,00 Detachable power cord with UK plug Power cord with UK plug 4, Converter EUR plug to CH Objective 100x 190, Converter EUR plug to CH 4, Spare LED for BMS D Tube for BMS D Spare LED for BMS D1 24,00 Complete large table with XY movement for BMS D1 size: 140x132 mm Adapted for assembly of a standard eyepiece Complete large table 75, Tube for BMS D , Filar micrometer eyepiece WF10x/10mm for A1-, E1- and D1 series Power cable with Euro plug Reticle is 10 mm long with every mm numbered. One revolution of the micrometer corresponds to one division indicated on the reticle. The reticle has 10 divisions. One full turn equals one reticle division Power cable 4, Filar micrometer eyepiece 220, All prices in Euro excluding transport and VAT 41

24 BMS D1 series BMS compound microscopes CHAPTER

25 BMS stereomicroscopes 2 BMS stereo series 44 BMS XL stereo series 52

26 BMS stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS stereo series BMS stereo series BMS stereo series_ Stereomicroscope BMS ST-30-C-2L-C Stereomicroscope BMS S-10-2L Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: one verticale tube with adjustable diopter (±5) Interpupillary distance: 50mm to 75mm adjustable Objective: objective 2x in slide holder, exchangeable Head: adjustable in height Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 20x Visual range: 10mm Working disctance: 80mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V/600mA adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS S-10-2L 99,00 Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter (±5) Interpupillary distance: 50mm to 75mm adjustable Objective: 2x and 4x through rotatable turret Head: adjustable in height Position of the head: object side Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 20x and 40x Visual range: 10mm (2x) and 5mm (4x) Working distance: 76mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS ST-30-C-2L-C 150,00 Stereomicroscope BMS ST-40-B-2L Stereomicroscope BMS S-20-2L Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter (±5) Interpupillary distance: 50mm to 76mm adjustable Objective: objective 2x in slide holder, exchangeable Head: adjustable in height Position of the head: object side Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 20x Visual range: 10mm Working distance: 80mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V/600mA adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS S-20-2L 119,00 Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter (±5) Interpupillary distance: 50mm to 76mm adjustable Objective: 1x and 3x through rotatable turret Position of the head: object side Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 10x and 30x Visual range: 20mm (1x) and 6,7mm (3x) Working distance: 76mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS ST-40-B-2L 160,00 Stereomicroscope BMS ST-40-C-2L Stereomicroscope BMS ST-30-B-2L-C Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter (±5) Interpupillary distance: 50mm to 76mm adjustable Objective: 1x and 3x through rotatable turret Head: adjustable in height Position of the head: object side Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 10x and 30x Visual range: 20mm (1x) and 6,7mm (3x) Working distance: 76mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS ST-30-B-2L-C 150,00 Stand: pole stand Colour: white, anti-bacterial paint Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter (±5) Interpupillary distance: 50mm to 76mm adjustable Objective: 2x and 4x through rotatable turret Position of the head: object side Focussing: coarse focussing knobs with slip clutch Illumination: LED, incident and transmitted illumination Lifetime LED: +/ hours Magnification: 20x and 40x Visual range: 10mm (2x) and 5mm (4x) Working distance: 76mm Base with Ø 50mm frosted glass and black/white plate with 2 stage clips Connection: 4,6V plug Operational voltage: 100~240V to 4,6V adapterincluding dustcover, eyecaps and tension wrench Stereomicroscope BMS ST-40-C-2L 160, All prices in Euro excluding transport and VAT. 45

27 BMS stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS stereo series Microscope BMS MS Eyepiece: WF10x/18mm, locked Tube: 45 inclined, adjustable in height, stop mechanism to project slide and objective Focussing: coarse focussing knobs with slip clutch Objectives: locked on, 2x Illumination: none Magnification: 20xIncluding: dustcover and black and white plate, 60Ømm Microscope BMS MS-2 59,00 Stereo microscope BMS S-05-L Stand: pole stand Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter Interpupillary distance: 50mm to 76mm adjustable Objective: objective 2x Head: adjustable in height Focussing: coarse focussing knobs Illumination: incident illumination LED Magnification: 20x Visual range: 10mm Working distance: 80mm Connection: 2x AA battery, not includedincluding: dust cover and Ø 50mm black and white plate Stereo microscope BMS S-05-L 49, Microscope maintenance toolbox With the following content: screwdriver, Philips head, 1 screwdriver, Philips head, 2 offset screwdriver, precision screwdriver, Philips head; 2,4mm precision screwdriver, Philips head; 3mm precision screwdriver; 1,2mm precision screwdriver; 2mm allen key; 1,5mm allen key; 2mm allen key; 3mm crescent shaped wrench for friction of coarse focussing tube of grease to lubricate moving parts of microscope lens paper maintenance toolbox 22, Wooden storage case Wooden storage case 64, Aluminium storage case for BMS 20- /30-C-2L-/40 series storage case 49, Black and white specimen holder plate, Ø 95mm specimen holder 12, Black and white specimen-holder plate, Ø 100mm Stereo microscope BMS SL specimen-holder plate 10, Eyepieces: two WF10x/20 mm, locked Tube: 45 inclined, one tube with adjustable diopter Interpupillary distance: 50 mm to 76 mm adjustable Objective: long working distance, objective pair 2x in slide holder, exchangeable Head: adjustable in height Focussing: coarse focussing knobs with slip clutch Illumination: incident illumination 12V/10W Magnification: 20x Working distance: 113 mm Connection: 230 V Detachable power cordincluding: dust cover, tension wrench and eye caps Stereo microscope BMS SL ,00 Stereo microscope BMS ST-50 Eyepieces: two WF10x/20 mm, locked Tubes: 45 inclined, one tube with adjustable diopter Interpupillary distance: 50 mm to 76 mm adjustable Objective: long working distance, objective pair 1x in slide holder, not exchangeable Head: adjustable in height Focussing: coarse focussing knobs with slip clutch Illumination: incident illumination, with regulation, LED and one LED s on flexible arm Magnification: 10x Working distance: 220mm Power connection: 230 V Detachable power cordincluding: dust cover, tension wrench and eye caps BMS dbox Durable plastic container with compartments, containing: preparation set: 1 forceps 1 preparation needle 1 spatula 1 seeker 1 scalpel 1 pair of scissors 1 pipette magnifiers 3x and 6x plastic Petri dishes, 80mm cover slips, 100 pieces microscope slides, 50 pieces observation beaker, 3 sections, with 2x and 3,5x magnifying glass BMS dbox 22, Dust cover Dust cover 2, Black and white specimen holder plate, diameter 65mm Glass plate, Ø 59mm Glass plate, Ø 59mm 11, Glass plate, Ø 80mm Stereo microscope BMS ST , specimen holder 9, Glass plate, Ø 80mm 12, All prices in Euro excluding transport and VAT. 47

28 BMS stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS stereo series Glass plate, Ø 95mm Set of eyepieces WF20x/10mm Dust cover for BMS TS series Objective holder pair 4x for BMS S10/ S20 series Object holder only for microscopes with transmitted light Objective 3.5x, long working distance, for BMS SL Glass plate, Ø 95mm 12, Set of eyepieces 42, Dust cover 7,70 Field of view: 5 mm Objective holder 30, Object holder 17, Objective 3.5x 49, Set of eyepieces WF5x/18mm Set of eyepieces 52, Set of eyepieces 25x for BMS TS series Set of eyepieces 25x 63, Objective holder pair 1x for BMS S10/ S20 series Field of view: 20mm Objective holder 38, Objective holder pair 6x for BMS S10/ S20 series Field of view : 3,3mm Objective holder 37, Objective holder pair 1x, long working distance for BMS SL Spare bulb for BMS 40-B-2L/40-C-2L Spare bulb 2, Objective holder 49, Set of eyepieces WF10x/20mm Eye caps for microscopes BMS 10/20/ Objective holder pair 2x for BMS S10/ S20 series Spare bulb for BMS S10/S20/S Spare bulb for BMS SL Set of eyepieces 42, Eye caps 3,00 Field of view: 10 mm Objective holder 30, Spare bulb 2,65 Objective holder pair 2x for BMS SL Spare bulb Objective holder 49, Set of eyepieces WF15x/13mm Set of eyepieces 42, Micrometer eyepiece WF10x/18mm with built in eyepiece micrometer, 10mm in 0,01mm Objective holder pair 3x for BMS S10/ S20 series Field of view : 6,7mm Dark field adapter for BMS ST...-2L Objective holder 30, Dark field adapter 52, Micrometer eyepiece 37, All prices in Euro excluding transport and VAT. 49

29 BMS stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS stereo series BMS Stereo Universal Digitube adapter Finally a solution to connect almost any digital photo camera to a microscope, stereomicroscope or field scope. No hassle with certain types of cameras and the specific use of digital adapters, with or without compensation optics! Just mount the camera on the camera platform to be moved into the X and Y direction to position the camera in line with the eyepiece. Suitable eyepiece size: 28 ~ 45 mm (Ø) Platform load: max. 2.0 kg Materials: ABS, alloy of aluminium Height: 195 mm Weight: 350 g adapter 29, Cell phone holder for Digitube Upgrade your Digitube adapter with this special phone holder and take pictures right away with your iphone or cell phone. Materials: ABS, alloy of aluminium Weight: 100 g Lens tissues Lens tissues 3, Toplight, side and centre, BMS SL40 assembly Ø: 22 mm comes complete with halogen lamp Toplight 32, Toplight, side, long, BMS SL Charger UK for BMS 30/40-LED + 100FL-3LED; 230V-5,5V/850mA Charger UK 19, Battery rechargeable, 3 pcs. Voltage: 1.2 V Dimensions: 50 x Ø 14 mm Capacity: 1300 mah Battery rechargeable 6,20 Eyepieces: two WF10x/20mm, locked Eyepiece: WF10x/18mm, locked Tube: one verticale tube with adjustable diopter (±5) Tube: 45º inclined, one tube with adjustable diopter (±5) Tube: 45º inclined Objectives: locked, 2x Objective: objective 1x in slide holder, exchangeable Objective: objective 2x in slide holder, exchangeable Objective: 1x and 3x through rotatable turret Objective: 2x and 4x through rotatable turret Illumination: LED, incident and transmitted illumination Illumination: LED, transmitted illumination Head: pole side (2x) Head: object side Cell phone holder 17,50 assembly Ø: 22 mm comes complete with halogen lamp Head: 360º rotatable Toplight 32,00 Working distance in mm: Connection: 4,6V plug XY stage for BMS 20, 30, 40, 11 and 14x series XY stage 195, Stage micrometer graticule 10 mm in 0,1mm Operational voltage: 100~240V to 4,6V/600mA adapter Operational voltage: 100~240V Upgrade to cordless with battery pack Price in Stage micrometer 22, All prices in Euro excluding transport and VAT. 51

30 BMS XL stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS XL stereo series BMS XL stereo series Stereomicroscopes Stereo microscope BMS 11-C-2L Stereo microscope BMS 130 Eyepieces: two WF10x/22mm with high eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Objectives: 2x and 4x through rotatable turret Magnification: 20x and 40x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Handle for easy carry Illumination: incident and/or transmitted adjustable LED illumination. Top LED is comparable with 20W halogen and bottom LED with 20W halogen Life span LED: approx. 50,000 hours Power supply: 220V-230V. The electric circuit is protected by a fuse (1A/250V) Detachable power cordincluding: dust cover and eyecaps, frosted glass disc and manual Stereo microscope BMS 130, LED 225,00 Stereo zoom microscope BMS 133, LED Eyepieces: two WF10x/22mm with high eyepoint eyepieces Tube: 45 inclined, 360 rotatable, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 108mm Handle for easy carry Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable LED illumination. Top LED is comparable with 20W halogen and bottom LED with 15W halogen Life span LED: approx. 50,000 hours Power supply: 220V-230V. The electric circuit is protected by a fuse (1A/250V) Detachable power cordincluding: dust cover, eyecaps and frosted glass, manual Stereo zoom microscope BMS 133, LED 325,00 Stereo zoom microscope BMS 133, Trino, LED Eyepieces: two WF10x/22mm with high eyepoint eyepieces Tube: 45 inclined, 360 rotatable, with dioptric compensation on one tube. Third tube for photo and video recording Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 108mm Handle for easy carry Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable LED illumination. Top LED is comparable with 20W halogen and bottom LED with 15W halogen Life span LED: approx. 50,000 hours Power supply: 220V-230V. The electric circuit is protected by a fuse (1A/250V) Detachable power cordincluding: dust cover, eyecaps and frosted glass, manual Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Objectives: 2x and 4x through rotatable turret Magnification: 20x and 40x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps and Ø 95mm frosted glass disc, black/white plate and manual Stereo microscope BMS 11-C-2L 259,00 Stereo microscope BMS 11-C-2L Trino Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on both tube. Third tube for photo and video recording Interpupillary distance: 50mm to 76mm adjustable Objectives: 2x and 4x through rotatable turret Magnification: 20x and 40x Working distance: 63mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power supply: V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 11-C-2L Trino 325,00 Stereo microscope BMS 11-B-2L Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Objectives: 1x and 3x through rotatable turret Magnification: 10x and 30x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power Supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 11-B-2L 259, Stereo zoom microscope BMS 133, Trino, LED 375, All prices in Euro excluding transport and VAT. 53

31 BMS XL stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS XL stereo series Stereo microscope BMS 11-B-2L Stereo microscope BMS 143 Trino Zoom Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tubes: 45 inclined, with dioptric compensation on one tube. Third tube for photoand video capture Interpupillary distance: 50mm to 76mm adjustable Objectives: 1x and 3x through rotatable turret Magnification: 10x and 30x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power Supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined,with dioptric compensation on both tube. Third tube for photo and video recording Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 108mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 11-B-2L Trino 325, Stereo microscope BMS 143 Trino Zoom 480, Stereo microscope BMS 140 Bino Zoom without illumination Stereo microscope BMS 143 Trino Zoom, LED Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 108mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: noneincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 140 Bino Zoom without illumination 299,00 Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined,with dioptric compensation on both tube. Third tube for photo and video recording Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 108mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable LED illumination Power supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 140 Bino Zoom Stereo microscope BMS 143 Trino Zoom, LED 490, Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V/15W Connection: 230V Detachable power cordincluding: dust cover, eyecaps and Ø 95mm frosted glass and black and white plate Stereo microscope BMS 140 Bino Zoom 375,00 Stereo microscope BMS 141 Bino Zoom High quality zoom microscope Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on both tubes +/-5mm Interpupillary distance: 54mm to 75mm adjustable Zoom objective: stepless adjustable 0,67x to 4,5x Magnification: 6.7x - 45x; 5x - 160x with extra lenses Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V/15W Power supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 140 Bino Zoom Stereo microscope BMS 141 Bino Zoom 749, Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0,7x to 4,5x Magnification: 7x to 45x Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable LED illumination Connection: 230V Detachable power cordincluding: dust cover, eyecaps and Ø 95mm frosted glass and black and white plate Stereo microscope BMS 140 Bino Zoom, LED 435, All prices in Euro excluding transport and VAT. 55

32 BMS XL stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS XL stereo series Stereo microscope BMS 144 Trino Zoom High quality zoom microscope Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on two tubes +/-5mm. Third tube for photo and video recording Interpupillary distance: 54mm to 75mm adjustable Zoom objective: stepless adjustable 0,67x to 4,5x Magnification: 6,7x - 45x; 5x and 160x with extra lenses Working distance: 100mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V/15W Power supply: 220V-230V Detachable power cordincluding: dust cover, eyecaps, manual and Ø 95mm frosted glass disc and black/white plate Stereo microscope BMS 144 Trino Zoom 849, Polarizer set for BMS 140/143 series Comprising of: polarizer and analyzer The polarizer replaces the glass plate of the base illumination. The analyzer is supposed to be mounted in front of the zoom lense on microscope head. Ø polarisator plate: 95mm Photo adapter for BMS 143 Trino Photo adapter 102, Set of eyepieces WF10x/22mm for BMS 11, 140 and Set of eyepieces 68, Polarizer set 109,00 BMS Stereo Eyepieces: two WF10x/22mm with high eyepoint Tube: 45º inclined, with dioptric compensation on one tube CCD adapter for BMS 11 Trino CCD adapter 85, Set of eyepieces WF15x/15mm for BMS 11, 140 and 143 Tube: 45º inclined, with dioptric compensation on both tubes Dark field equipment Ø 95mm Set of eyepieces 89,50 Tube: 45º inclined, third tube for photo and video Tube: 45º inclined, with dioptric compensation on two tubes, third tube for photo and video Head: 360º rotatable Dark field equipment 59, Eye caps Objectives: 1x and 3x through rotatable turret Objectives: 2x and 4x through rotatable turret Zoom objective: stepless adjustable 0,7x to 4,5x Photo adapter for BMS 11 Trino Eye caps 3, Set of eyepieces WF20x/10mm for BMS 11, 140 and Set of eyepieces 89,50 Zoom objective: stepless adjustable 0,67x to 4,5x Photo adapter 76,70 Working distance in mm: Illumination: incident and/or transmitted adjustable halogen Illumination: incident and/or transmitted adjustable LED none Price in Euro s CCD adapter for BMS 143 Trino CCD adapter 102, Set of eyepieces WF30x/9mm for BMS Suitable for wearers of glasses as well Set of eyepieces 99, All prices in Euro excluding transport and VAT. 57

33 BMS XL stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS XL stereo series Spare bulb halogen 12V-15W for the base of BMS 11, 140 and Spare bulb halogen 7,95 Objective ring without lens, 50mm Objective ring 5,50 Auxiliary lens 2,0x for BMS 140/143 (working distance: 30mm) Auxiliary lens 75,00 Boom stand for BMS 11, 140 to 144, extra heavy version, movement in x, y and z-axis Boom stand 245,00 Moveable mechanical stage Universal stage with XY travel and option for 360 rotation Dimensions: 180 x 155 x 26 mm XY travel range: 75 x 55 mm Glass dimension: Ø 95 mm Mounting-Ø: 95 mm Adapter ring for installation on BMS 11 and 14x series Adapter ring 45, mechanical stage 190, Reflector halogen bulb 12V-15W for toplight BMS 11, 140 and Reflector halogen bulb 7, Auxiliary lens 0x for BMS 141/ Auxiliary lens 29, Universal stand for BMS 11, 140 tot Universal stand 245, Moveable specimen holder with coaxial knobs and x- and y-movement specimen holder 299, Moveable mechanical stage Precision stage with XY adjustment per 0.1 mm Dimensions: 160 x 125 x 21 mm XY travel range: 75 x 55 mm Glass dimension: Ø 90 mm Mounting-Ø: 95 mm Reflector bulb 150W, halogen for en Reflector bulb 28, mechanical stage 699, Micrometer eyepiece WF10x/22mm with built-in eyepiece micrometer, 10mm in 0,01mm Auxiliary lens 0,5x for BMS 140/143 (working distance/wd: 165mm) Auxiliary lens 75, Boom stand for BMS 11, 140 to 144, movement in x and y-axis XY stage for BMS 20, 30, 40, 11 and 14x series Eyepiece micrometer disc, 0.1mm, Ø 25mm, for BMS 11 and 14x series Micrometer eyepiece 54, Boom stand 195, XY stage 195,00 Mechanical stage large for BMS 11 and 140 series Eyepiece micrometer disc 16, Mechanical stage 789, Auxiliary lens 1,5x for BMS 140/143 (working distance: 45mm) Auxiliary lens 75, All prices in Euro excluding transport and VAT. 59

34 BMS XL stereo series BMS stereomicroscopes CHAPTER 2 CHAPTER 2 BMS stereomicroscopes BMS XL stereo series Wooden storage case Wooden storage case 67,90 Cold light source LED 24W (=150W halogen) When light is wanted but you can do without heat. This light source projects brilliant white light (natural colour). Ideal for temperature critical applications. Light is transported through a fibre optic system from source to object. Produces no heat near the object. The heat stays in the housing and is transported without mechanical cooling. This LED light source makes therefore no sound. Black and white specimen holder plate, Ø 95mm specimen holder 12,50 Set of eyepieces WF15x/16mm for BMS 141/ Set of eyepieces 99,00 Auxiliary lens 0,75x for BMS 141/144 Working distance: 117mm Auxiliary lens 99,00 CCD adapter for BMS 144 Trino CCD adapter 138, Dark field device with iris diaphragm for BMS 11 and 14x series Dark field device 115, Cell phone holder for Digitube Upgrade your Digitube adapter with this special phone holder and take pictures right away with your iphone or cell phone. Materials: ABS, alloy of aluminium Weight: 100 g Cell phone holder 17,50 Includes a double flexible fibre optic light guide with focussing lenses at the end. The light beam can be focussed by the lenses. The gooseneck allows specific positioning of the light beam. Possibility to fit color filters in the fiberglass holder. The following colours are available: yellow, red and blue. Main power : 90~240 V, 50 Hz Fuse: T250V/5A ESD safe RoHS CE Fiber optics: two-armed with focussing lens Colour temperature: 6000~7000 K Fiber optics port: 5/8 inch Bulb : 24W LED Bulb life: 10,000 hours Lamp housing: space-saving Detachable power cord Cold light source 369, Polarizer set for BMS TS and 141/144 series Comprising of: polarizer and analyzer The polarizer replaces the glass plate of the base illumination. The analyzer is supposed to be mounted in front of the zoom lense on microscope head. Ø polarisator plate: 95mm Polarizer set 109, Set of eyepieces WF20x/12mm for BMS 141/ Set of eyepieces 99, Auxiliary lens 0,3x for BMS 141/144 Working distance: 287mm Auxiliary lens 99, Auxiliary lens 1,5x for BMS 141/144 Working distance: 47mm Auxiliary lens 99, Auxiliary lens 0,4x for BMS 141/144 Working distance: 217mm Auxiliary lens 99, Trino head for BMS 141 and Trino head 728, Photo adapter for BMS 144 Trino Photo adapter 138, Set of eyepieces WF10x/22mm for BMS 141/144 Stage micrometer graticule 10 mm in 0,1mm Set of eyepieces 99, Stage micrometer 22, Auxiliary lens 2,0x for BMS 141/144 Photo eyepiece Pho4x for BMS 144 photo adapter Lens tissues Auxiliary lens 0,5x for BMS 141/144 Working distance: 177mm Working distance: 26mm Auxiliary lens 99, Photo eyepiece 24, Lens tissues 3, Auxiliary lens 99, All prices in Euro excluding transport and VAT. 61

35 BMS XL stereo series BMS stereomicroscopes CHAPTER Stand with illumination Stand with illumination 285, Microscope storage case, aluminium Dimensions including lid (wxdxh): 325 mm x 275 mm x 530 mm Dimensions excluding lid (wxdxh): 325 mm x 275 mm x 450 mm Suitable: EduLed, D1, C0, C1, C2, D1, Stereo range 11 till storage case 82, Binocular head BMS 141 Without eyepieces Binocular head BMS , Upgrade from binocular to trinocular viewing This set consists of a back panel which you can mount on a BMS 141 in place. Your standard binocular microscope will be converted into a trinocular version. After conversion your microscope is comparable with the BMS Height control BMS 141 bino or trino Possible video or photo adapter needs to be reordered separately Upgrade 100, Height control 72, Aluminium storage case for BMS 141/ storage case 105,

36 BMS digital cameras 3 Cameras 64

37 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras Cameras BMS HDMI true color microscope camera, type II All options can be selected by using the mouse and on-display interface. BMS USB and HDMI microscope camera The analog camera is very useful for microscope. But it can only display the video on the monitor with low resolution large noise and bad quality. Now you have another choice, the BMS USB and HDMI camera Specification camera: Digital camera resolution: 6,0 MegaPixels Analog camera resolution 2,0 MegaPixels Signal output USB 2.0, HDMI Audio Signal NO Sensor Size 1/2,7inch Sensor technology: Sony IMX236 Full Image size: 3264 x 1836 pixel Pixel size: 2,8 x 2,8 micron Frame rate HDMI: 60 frames/sec (1920 x 1080) Frame rate USB: 20 frames/sec (1920 x 1080) Sensitivity: 1,275 V/Lux-Second at 550nm S/N ratio: 52dB Dynamic range: 72 db Max exposure time: 0,001~10 sec Internal memory card: 2GB MicroSD (supported up to 8GB) External camera power: 12 V 2000mA Camera IR Filter: 700 nm Automatic White Balance: Auto / Man Automatic Gain Control: Auto / Man Automatic Back light control: Auto / Man Exposure control: Auto / Man C-Mount connection: yes Calibration Slide yes Included: 1.8 m USB cable, power supply, MicroSD card reader, Installation manual, CD Rom. Software specification System requirements: Windows XP, Vista, W7/W bit, USB 2.0 Supplied Software BMS_pix2 Driver types: No driver needed( Microsoft Driver ) Capture features: Auto white balance, auto exposure, image size, image capture, compressed video capture Control parameters: Image size, gain, exposure time, saturation, colors, gamma, contrast, flip General camera specification Working temperature: +0 up to +60 C Storage temperature: -10 up to +50 C Relative Humidity: up to 80% Camera height: 11cm Camera diameter: 7cm Weight: 300 gr BMS HDMI true color microscope camera, type II 650,00 BMS USB and HDMI camera is specially designed for microscope with plane HDMI display to get higher quality microscope video without the need of computer. It directly outputs the digital video signal to RGB plus other video control signal and thus it can be directly connected to a computer display in this process, no AD converter is used, thus no signal lost. With the deliberatly designed optical system, you can directly plug the HDMI camera to microscope, then a high quality Video microscope is constructed without any other requirement. As an extra the camera has also a USB output which is working without any driver. In combination with the BMS_pix software you have a fantastic solution to run HDMI out put and PC output at the same time. This gives you the option to use the camera for inspection purpose and documention purpose at the same time. Pixels: 3Mpixel resolution 2048 x 1536 Type of sensor: CMOS size 1/205 inch Exposure: Auto and compensation White balance: Auto WB, preset auto, daylight, LED, fluorescent and tungsten Capture resolution: 2048 x 1536 (SD) and 1280 x 1024 (USB) Preview: 1080i, 30 fps Frequency: 50/60Hz Menu language: English Save: folder micro SD, JPEG format Outputs: HDMI, USB 2.0 Mount: C/CS mount Operating system: Windows XP, W7 and W8 Power: 5V DC BMS USB and HDMI microscope camera 375,00 BMS Eyepiece & C-mount camera WiFi The BMS Eyepiece and C-mount camera is a digital (1 megapixel) WiFi camera with an integrated WF10x eyepiece, especially designed for use in combination with microscopes and stereo microscopes. The WiFi signal makes it possible to receive the image on more than one mobile device (eg. ipad and mobile telephone). Besides the WiFi signal does this camera also has a USB output which works with BMS_pix2 software. Camera: 1/2.5 CMOS met DSP/MTF Resolution: 1280 x 720 pixels Digital output: WiFi and USB OS: Windows, IOS6 and Android Including 0,35x compensation optics, calibration slide, software, two metal adapters for use with stereo microscopes Ø 30,0 mm and Ø 30,5 mm BMS Eyepiece & C-mount camera WiFi 165, All prices in Euro excluding transport and VAT. 65

38 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras BMS CellPad Thanks to 1024x768 high resolution screen, CellPad has great color fidelity and offers smooth images. With up to 5-point multi-touch screen, the CellPad E control is just at your fingertips. CellPad E uses the same quality LCD screen as Apple ipad. Latest LCD technique significantly improve the screen brightness, coupled with IPS technology to reduce the light reflection, you can get a same sharp and clear screen from any angle.you don t need to install driver or application, nor system compatible issue be concerned, but just starting camera, the live image presents in front of you immediately. You don t even have to worry about any parameter adjustment. CellPad takes care of all the parameters like white balance, exposure time etc smartly. Simplely onetouch on the screen to document your pictures to system memory or to your external storage devices like mini SD Card or USB devices. Integrated with 2MP camera, CellPad allows high speed image acquisition. You also can do the target searching, focusing through the screen easily instead of the microscope eyepieces. Furthermore, CellPad utilize the special designed image processing chip for the built-in cameras. CellPad focus on image dynamic range improvement and image detail quality. It provides solid guarantee for microscopy imaging applications. BMS Eyepiece & C-mount camera 1.3 megapixel USB 2.0CMOS - digital eyepiece camera with 0.4x compensation optics Eyepiece & C-mount at the same time. The BMS Eyepiece & C-mount camera is a digital USB camera with an integrated WF 10x eyepiece, especially designed for use in combination with microscopes or stereo microscopes Camera: 1/3 CMOS with DSP Resolution: 1280x1024 pixels (horizontal/vertical) Frame rate: 15fps at 1280x1024 pixels; 30fps at 640x480 pixels Pixels: 1,350,000 Digital port: USB 2.0, cable ca. 190cmIncluding: 0.4x compensation optics, calibration slide, BMS software, two metal adapters for stereo microscopes Ø 30.0mm and 30.5mm BMS Eyepiece & C-mount camera 110, BMS CellPad Characters : Display: 8 inch High-resolution(1024x768) Color LCD Touch Screen Built-in Camera: 2.0 Megapixel Color Camera, 1024x768 Built-in Software: Capture/Measurement App Mechanical Structure: LCD Screen horizontal rotatable, LCD Screen vertical rotatable Operating System: Android CPU: Dual-core 1.5GHz Memory: 1G (DDR3) Storage: Internal 5GB or External Mini SD Card HDMI Display: Yes Output Ports: 1x HDMI Port, 1x USB 2.0 Port, 1x Mini USB 2.0 Port Power Supply: Input AC 110V-220V Output DC 5V BMS CellPad 780,00 BMS Eyepiece & C-mount camera 0.3 megapixelusb 2.0CMOS - digital USB eyepiece camera with 0.4x compensation optics Eyepiece & C-mount at the same time BMS Eyepiece & C-mount camera 3 megapixels USB 2.0CMOS - digital eyepiece camera with 0.4x compensation optics Eyepiece & C-mount at the same time. The BMS Eyepiece & C-mount camera is a digital USB camera with an integrated WF 10x eyepiece, especially designed for use in combination with microscopes or stereo microscopes. Camera: 1/2 CMOS with DSP/MTF Resolution: 2048x1536 pixels (horizontal/vertical) Frame rate: 11fps at 2048x1536 pixels Pixels: 3,145,000 Digital port: USB 2.0, cable ca. 180cm Operating systems: Windows XP, Vista & 7. Also compatible with Mac OSIncluding: 0.4x compensation optics, calibration slide, BMS software, two metal adapters for stereo microscopes Ø 30.0mm and 30.5mm BMS Eyepiece & C-mount camera 3 megapixels USB 2.0 CMOS BMS Eyepiece & C-mount camera 5 megapixels USB 2.0 CMOS - digital eyepiece camera with 0.4x compensation optics The BMS Eyepiece & C-mount camera is a digital USB camera with an integrated WF 10x eyepiece, especially designed for use in combination with microscopes or stereo microscopes. Camera: 1/4 CMOS with DSP Optical system: 18mm visual range Resolution: 640x480 (horizontal/vertical) Pixels: 350,000 Frame rate: 30f/s (640x480) Power supply: through USB port Digital port: USB 2.0, cable ca. 180cmIncluding: 0.4x compensation optics, calibration slide, BMS software, two metal adapters for stereo microscopes Ø 30.0mm and 30.5mm BMS Eyepiece & C-mount camera 75,00 Eyepiece & C-mount at the same time. The BMS Eyepiece & C-mount camera is a digital USB camera with an integrated WF 10x eyepiece, especially designed for use in combination with microscopes or stereo microscopes Camera: 1/2.2 CMOS with DSP/MTF Pixels: 5,038,000 Digital port: USB 2.0, cable Operating systems: Windows XP, Vista & 7/8. Also compatible with Mac OSIncluding: 0.4x compensation optics, calibration slide, BMS software, two metal adapters for stereo microscopes Ø 30.0mm and 30.5mm BMS Eyepiece & C-mount camera 5 megapixels USB 2.0 CMOS All prices in Euro excluding transport and VAT. 67

39 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras BMS Eyepiece & C-mount camera 10 megapixels USB 2.0 CMOS - digital eyepiece camera with 0.4x compensation optics BMS ecam 0.3 megapixel CMOS - USB eyepiece camera with an integrated 10x eyepiece Eyepiece & C-mount at the same time. The BMS Eyepiece & C-mount camera is a digital USB camera with an integrated WF10x eyepiece, especially designed for use in combination with microscopes or stereo microscopes Camera: 1/2.3 CMOS with DSP/MTF Pixels: 10,000,000 Digital port: USB 2.0, cable Operating systems: Windows XP, Vista & 7. Also compatible with Mac OSIncluding: 0.4x compensation optics, calibration slide, BMS software, two metal adapters for stereomicroscopes Ø 30.0mm and 30.5mm BMS Eyepiece & C-mount camera 10 megapixels USB 2.0 CMOS BMS mcam 1.3 megapixel CMOS - C-mount Image sensor: 1/4 CMOS with DSP Resolution: 1280 x 1008 (horizontal x vertical) Pixels: 1,350,000 Frame rate: 8 fps (1280x1008), 30 fps (640x480) Dynamic range: >62 db Lens: 8 mm C-mount in metal housing Focal length: 50 mm - infinity Iris diaphragm: automatic Sensitivity in lux: 3.0 Electronicexposure: illumination, white balance,gain Image enhancement: brightness, contrast, gamma, saturation,sharpness Power supply: through USB port, USB 1.0 and 2.0 Operating system: Windows XP (SP2/3), Vista or W7Included accessories: Software (BMS_pix), base, adapter for compound and stereo microscope, USB cable An attractive alternative for those who want to grab images but have to obey a budget. Image sensor: 1/4 CMOS OV Optical system: WF 10x/18 mm integrated Pixels: 300,000 Pixel size: 6µm x 6µm Resolution: 640 x 480 pixels (horizontal/vertical) Filter RGB Bayer Pattern Lens mount C and CS-mount Max. frame rate: 30fps at 640 x 480 Output: RGB 8 bit Exposure control: auto/manual Exposure time: 1ms - 0.3s White balance: auto/manual Scan Mode Progressive Sensivity 550nm): 3.0 Signal-to-noise ratio: 44dB Dynamic range: >60dB RGB interface: USB 2.0, 480Mb/s Digital output: through USB, 1.8 m cable Power supply: 5V through USB port PC Operating temperature: 0-60 C Humidity: 45% - 85% Storage temperature: C Minimal system requirements: Windows XP, Vista and W7/W8Including software and adapter for stereo microscopes BMS ecam 0.3 megapixel CMOS - USB eyepiece camera 48, BMS mcam 1.3 megapixel CMOS - USB camera 149,00 BMS mcam 3 megapixels CMOS - C-mount Image sensor: 1/2 CMOS with DSP Resolution: 2048 X 1536 (horizontal x vertical) Pixels: 3,145,000 Frame rate: 6 fps (2048x1536), 30 fps (640x480) Dynamic range: >62 db Lens: 8 mm C-mount in metal housing Focal length: 50 mm - infinity Iris diaphragm: automatic Sensitivity in lux: 3.0 Electronicexposure: illumination, white balance,gain Image enhancement: brightness, contrast, gamma, saturation,sharpness Power supply: through USB port, USB 1.0 and 2.0 Operating system: Windows XP (SP2/3), Vista or W7Included accessories: Software (BMS_pix), base, adapter for biological and stereo microscope, USB cable BMS mcam 3 megapixels CMOS - C-mount 199,00 BMS vcam III 2 megapixels USB + AV The VCAM III is used with the traditional microscope. By replacing eyepiece or connecting C-Mount with this LCD module, you can view specimens or objects on the LCD screen which are easy to see and to share the view with others. You can take snapshots or short videos with the flash memory or SD card. Also you can connect with PC or TV set for live viewing. The VCAM III is composed of optical system, image sensor, LCD module, operating keyboard and CD file. Optical System: field lens and eyepiece lens Image Sensor: 2.0MP CMOS and IC board LCD Module: 5.5 TFT screen, 8MB flash memory, SD card slot, USB receptacle, Video cable port and DC socket Operating Keyboard: Power Button, Menu Key, Mode Key, Snap Key, Ok and Direction Keys CD: Driver software and Viewing software, Windows XP, W7Standard accessories included with vcam III USB2.0 cable TV cable AC adapter Adapter for Stereo Microscope CD of driver and viewing filespecifications: Image Sensor: 2.0 megapixels CMOS with resolution: 1600x1200 pixels Picture File Size: 12.0/8.0/5.0/3.0/2.0/1.3/0.35 MP Image Format: JPEG, AVI Flash Memory: 8 MB External Memory Slot: SD Optical Magnification: 10x Digital Zoom: 8x LCD for preview / playback: 5.5 TFT LCD with 320 x 240 pixels Power: DC5V Power Adapter USB type: USB 2.0 full speed TV System: PAL and NTSC BMS vcam III 2 megapixels USB + AV 249, All prices in Euro excluding transport and VAT. 69

40 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras BMS USB and VGA microscope camera BMS EcoCam 5, gooseneck camera, 5 megapixel, WiFi The analog camera is very useful for microscope. But it can only display the video on the monitor with low resolution large noise and bad quality. Now you have another choice, the BMS USB and VGA camera. BMS USB and VGA camera is specially designed for microscope with plane VGA display to get higher quality microscope video without the need of computer. It directly outputs the digital video signal to RGB plus other video control signal and thus it can be directly connected to a computer display in this process, no AD converter is used, thus no signal lost. With the deliberatly designed optical system, you can directly plug the VGA camera to microscope, then a high quality Video microscope is constructed without any other requirement. High quality 5M pixel camera sensor captures vivid images of documents, 3D objects, and live movements. Microscope conntions by special adapter for monocular- and stereomicroscopes. (not included) Experience crystal clear, blur-free images with vivid, true-to-life colors during any live demonstration through HD1080P at 25 fps frame rate. Annotate, draw or mark over live or saved images. Intergrated LED illumination in the head. HD1080P resolution ensures crystal-clear image displaying. One-touch recording instantly saves video and audio in built-in 2G storage. Special-designed lens features shooting area up to A3 size for open textbooks, over sized documents and 3D objects. Extra long gooseneck for easy microscope use As an extra the camera has also a USB output which is working without any driver. In combination with the BMS_pix software you have a fantastic solution to run VGA out put and PC output at the same time. This gives you the option to use the camera for inspection purpose and documention purpose at the same time. Specification camera Resolution: 1400X900; 1280X720, 1280X1024; 1024X768 Frame Rate: 20 Optical Size: 1/3(4:3) Video Output: Standard VGA interface, CRT LCD etal, DLP/LCD projector. No computer needed Digital Output: USB 2.0 Power Supply: DC 5V Operating Temperature: -30 C ~ 70 C Dimensions: 20 x 56 x 53mm Alignment: CrossIncluding: Euro plug, softare CD with BMS_pix, compensation optics, VGA cable, USB cable BMS USB and VGA microscope camera 250,00 Specifications : EcoCam 5 Total pixel: 5 Megapixel Digital Zoom: 10x (2x without distorton, 5x digital) Frame rate: 25 fps (max) Shooting area: A3 (max) Focus: Auto Resolution (Horizontal): >900TV lines White balance: Auto/Manual Brightness adjustment: Yes Color adjustment: Yes Image capture: 400 images on board Image mirror: Yes Image rotation: 90, 180, 270 (real time) Image split: Yes Image freeze: Yes Picture in picture: Yes Black and white/color conversion: Yes Positive/negative conversion: Yes Microphone: Built-in OSD: English Output signal: 1 x VGA (XGA, SXGA) Output signal: 1 x HDMI 1080P (HDMI 1.3 and higher) USB2.0: Hostx1, Slavex1 LAN: x1 WiFi: Yes, to connect with PC, Android or IOS devices Remote control: Yes Kensington lock: Yes Light: Integrated LED on camera head Power: DC 5V/3A Weight: 1,3 kg Software: W7/W8.x and Mac OS Dimension (Folded): 170mm x 183mm x 343mm Dimension (Setup): 170mm x 585mm x 343mm BMS EcoCam 5, gooseneck camera, 5 megapixel, WiFi 295, All prices in Euro excluding transport and VAT. 71

41 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras BMS EcoCam 8, gooseneck camera, 8 megapixel, WiFi High quality 8M pixel camera sensor captures vivid images of documents, 3D objects, and live movements. Microscope conntions by special adapter for monocular- and stereomicroscopes. (not encluded) Experience crystal clear, blur-free images with vivid, true-to-life colors during any live demonstration through HD1080P at 30 fps frame rate. Annotate, draw or mark over live or saved images. Intergrated LED illumination in the head. HD1080P resolution ensures crystal-clear image displaying. One-touch recording instantly saves video and audio in built-in 2G storage. Special-designed lens features shooting area up to A3 size for open textbooks, over sized documents and 3D objects. Extra long gooseneck for easy microscope use.specifications : EcoCam 8 Total pixel: 8 Megapixel Digital Zoom: 10x (2x without distortion, 5x digital) Frame rate: 30 fps (max) Shooting area: A3 (max) Focus: Auto Resolution (Horizontal): >900 TV lines White balance: Auto/Manual Brightness adjustment: Yes Color adjustment: Yes Image capture: 400 images on board Image mirror: Yes Image rotation: 90, 180, 270 (real time) Image split: Yes Image freeze: Yes Picture in picture: Yes Black and white/color conversion: Yes Positive/negative conversion: Yes Microphone: Built-in OSD: English Output signal: 1 x VGA (XGA, SXGA) Output signal: 1 x HDMI 1080P (HDMI 1.3 and higher) USB2.0: Hostx1, Slavex1 LAN: x1 WiFi: Yes, to connect with PC, Android or IOS devices Remote control: Yes Kensington lock: Yes Light: Integrated LED on camera head Power: DC 12V/3A Weight: 1,8 kg Software: W7/W8.x and Mac OS Dimension (Folded): 170mm x 183mm x 343mm Dimension (Setup): 170mm x 585mm x 343mm Wireless & USB digital microscope, ipad/android/pc Portable mobile Wi-Fi microscope USB 2.0 Micro Interface Built-in Wi-Fi module-wifi Working mode 5.0M true color 1/4 CMOS Up to about 10 mobile devices Providing remarkable image on precision inspection, skin care, education, art preservation, science Magnification: 130x Technical specifications: Size: 62mm (diameter) x 54 mm(height) Weight: 90 g Working modes: USB 2.0 Micro Interface and WIFI Working mode Sensor type: 5.0M true color 1/4 CMOS Illumination: Built in 8LEDs Speed Shooting: 1 second Focus Mode: Single Automatic focus/continue Automatic focus magnification: 80x (Display in 14 Size Screen)Operation software in Windows: BMS Capture, Simple operation,easy to use Resolution: Max: 2592 x 1944 (5,038,848 MegaPixel) A/D switch: 12-bit on chip,10-bit to pc Image format Frame rate YUV output: MJPG output: 640x480@40fps,800x600@40fps,1280x960@40fps,1280x720@40f ps,2592x1944@15fps Exposure way: Wide range auto/manual exposure White balance: Automatic White Balance/Automatic Exposure Focus mode: Continuous auto-focus; single auto-focus; manual fine adjust Snapshot control API: native C/C++, C#, Direct Show, UVC Observe methods: Still picture and video in real time Spectral region: nm (with IR-cut Filter) Wireless parameters wireless protocol: IEEE b/g/n frequency range: ghz transmit bandwidth: 150Mbps Power supply: Separable and rechargeable LR123 lithiumbattery(3.6 V 600 mah); DC 5V USB power supply by PC;External DC 5V 1.5A adapter OS requirement: Microsoft Windows XP/Vista/7/8 (32 & 64 bit); MAC OS X (wireless working mode) IOS5/IOS6 (wireless working mode) Hardware requirement CPU: equivalent to Intel Core2 1.6GHz or higher Memory: 2GB or higher USB port: USB2.0 High-speed port DVD-ROM(required when installing software) Wireless & USB digital microscope, ipad/android/pc 225, BMS EcoCam 8, gooseneck camera, 8 megapixel, WiFi 395,00 BMS Wifi router, USB-to-WiFi BMS Wifi router, USB-to-WiFi 199, BMS Eyepiece & C-mount camera WiFi, 5Mpixel The BMS Eyepiece and C-mount camera is a digital (5 megapixel) WiFi camera with an integrated WF10x eyepiece, especially designed for use in combination with microscopes and stereo microscopes. The WiFi signal makes it possible to receive the image on more than one mobile device (eg. ipad and mobile telephone). Besides the WiFi signal does this camera also has a USB output which works with BMS_pix3 software. Camera: 1/2.5 CMOS met DSP/MTF Resolution: 1280 x 720 pixels Digital output: WiFi and USB OS: Windows, IOS6 and Android Including 0,35x compensation optics, calibration slide, software, two metal adapters for use with stereo microscopes Ø 30,0 mm and Ø 30,5 mm BMS Eyepiece & C-mount camera WiFi, 5Mpixel 200, All prices in Euro excluding transport and VAT. 73

42 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras Camera, USB2.0, CMOS The SCMOS Camera body, made from aluminum alloy blackening, ocular ousing: Dia.27.2 x 40 mm ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT filter to filter the infrared light and protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions A Camera, USB2.0, CMOS 0,3MPixel 45, A Camera, USB2.0, CMOS 1,3MPixel 65, A Camera, USB2.0, CMOS 2MPixel 85, A Camera, USB2.0, CMOS 3MPixel 95, A Camera, USB2.0, CMOS 5MPixel 105,00 Camera, USB2.0, CMOS kitcamera s The UCMOS Series USB2.0 Camera body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions AK1 Camera, USB2.0, CMOS 0,3MP 75, AK1 Camera, USB2.0, CMOS 1,3MP 110, BK1 Camera, USB2.0, CMOS 2MP 135, AK1 Camera, USB2.0, CMOS 3MP 135, AK1 Camera, USB2.0, CMOS 5MP 185, BK1 Camera, USB2.0, CMOS 8MP 280, BK1 Camera, USB2.0, CMOS 9MP 285,00 Camera, USB2.0 kit The SCMOS Camera body, made from aluminum alloy blackening, ocular housing: Dia.27.2 x 40mm ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT filter to filter the infrared light and protect the camera sensor. No moving parts included. These measures ensure a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions AK1 Camera, USB2.0, CMOS 0,3MP kit 65, AK1 Camera, USB2.0, CMOS 1,3MP kit 85, AK1 Camera, USB2.0, CMOS 2MP kit 105, AK1 Camera, USB2.0, CMOS 3MP kit 115, AK1 Camera, USB2.0, CMOS 5MP kit 125,00 Camera USB2.0, CMOS The UCMOS Series USB2.0 Camera body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions A Camera, USB2.0, CMOS 0,3MPixe 75, A Camera, USB2.0, CMOS 1,3MPixel 105, B Camera, USB2.0, CMOS 2MPixel 130, A Camera, USB2.0, CMOS 3MPixel 135, A Camera, USB2.0, CMOS 5MPixel 190, B Camera, USB2.0, CMOS 8MPixel 250, B Camera, USB2.0, CMOS 9MPixel 260, A Camera, USB2.0, CMOS 10MPixel 270, AK1 Camera, USB2.0, CMOS 10MP 290, AK1 Camera, USB2.0, CMOS 14MP 325,00 Camera, USB2.0, CCD The UHCCD Series USB2.0 CCD camerabody, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions A Camera, USB2.0, CCD, 0,8MPixel 500, A Camera, USB2.0, CCD, 1,4MPixel 700, B Camera, USB2.0, CCD 1,4MPixel 625, B Camera, USB2.0, CCD 3.2MPixel 625, A Camera, USB2.0, CCD 5,1MPixel 500,00 Camera, USB3.0, CMOS 3,1MPixel The UC3MOS body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions A Camera, USB3.0, CMOS 3,1MPixel 270, A Camera, USB3.0, CMOS 5,0MPixel 270, A Camera, USB3.0, CMOS 8,5MPixel 290, A Camera, USB3.0, CMOS 10MPixel 300, A Camera, USB3.0, CMOS 14MPixel 350, A Camera, USB2.0, CMOS 14MPixel 290,00 Camera, USB3.0, CMOS 3,1MP kit The UC3MOS body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions AK1 Camera, USB3.0, CMOS 3,1MP kit 300, AK1 Camera, USB3.0, CMOS 5,0MP kit 300, AK1 Camera, USB3.0, CMOS 8,5MP kit 325, AK1 Camera, USB3.0, CMOS 10MP kit 340, AK1 Camera, USB3.0, CMOS 14MP kit 390, All prices in Euro excluding transport and VAT. 75

43 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras Camera, WiFi, 0,3MPixel The WCAM body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions. Surface cam, 1,3MPixel USB-powered handheld digital microscope with 10x to 200x magnification. Built-in 1.3MP digital camera for capturing images and videos. 8 LED ring illuminator. Use the included Windows software to capture images and video of your discoveries. Measure your specimens with built-in measurement tool A Camera, WiFi, 0,3MPixel 130, AS 65,00 Surface cam, 1,3MPixel AK1 Camera, WiFi, kit 0,3MPixel 165,00 Surface cam, 2,0MPixel Camera, WiFi, 720P, 5,0MPixel The WCAM body, made from tough, zinc alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts. These measures ensure a rugged, robust solution with an increased lifespan when compared to other camera solutions. USB-powered handheld digital microscope with 10x to 200x magnification. Built-in 2.0MP digital camera for capturing images and videos. 8 LED ring illuminator. Use the included Windows software to capture images and video of your discoveries. Measure your specimens with built-in measurement tool AS 75,00 Surface cam, 2,0MPixel B Camera, WiFi, 720P, 5,0MPixel 165,00 Calibration slides BK1 Camera, WiFi, kit,, 5,0MPixel 200,00 Camera, USB3.0, CMOS 3,1MPixel Calibration slide, M1 10, Calibration slide, M2 25, Calibration slide, M3 40,00 Through HDMI interface stream video to HDTV. Easy connecting to other equipment on the production line with the C-mount optical interface. High-resolution and high frame rate, perfect color reproduction, highly integrated and compact, low failure rate and stable performance x 720 (720P) resolution to match the current high-definition displayer on the market. Supporting various OSD cursors which can be toggled On/Off (functions shift as users press the button). The OSDs including: scale, double horizontal line, double vertical line, double cross line, Tri-cross line. The other function buttons including automatic white balance and exposure on/off (AEWB), saving images to SD card (SAVE), video stream and freeze on/off (FREE- ZE), remote image snapshot controller to reduce the vibration blur (REMOTE). For the above characteristic and technical features, which utmost meet various applications and widely apply to industrial inspection, education and research, materials analysis, precision measurement, medical analyses etc HA Camera, Multi output 5,0MPixel 375,00 Camera, USB3.0, CMOS 3,1MPixel Through HDMI interface stream video to HDTV. Easy connecting to other equipment on the production line with the C-mount optical interface. High-resolution and high frame rate, perfect color reproduction, highly integrated and compact, low failure rate and stable performance x 720 (720P) resolution to match the current high-definition displayer on the market. Supporting various OSD cursors which can be toggled On/Off (functions shift as users press the button). The OSDs including: scale, double horizontal line, double vertical line, double cross line, Tri-cross line. The other function buttons including automatic white balance and exposure on/off (AEWB), saving images to SD card (SAVE), video stream and freeze on/off (FREE- ZE), remote image snapshot controller to reduce the vibration blur (REMOTE). For the above characteristic and technical features, which utmost meet various applications and widely apply to industrial inspection, education and research, materials analysis, precision measurement, medical analyses etc HA Camera, HDMI+USB 5,0MPixel 650, All prices in Euro excluding transport and VAT. 77

44 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras BMS Wifi router Internet access point for dual 2.4/5G frequency. Will support up to 30 users simultaneously. Specification: Transfer protocol: IEEE b/g/n Transmission rate: up to 3000 Mbps Frequency range: simultaneously 2,4GHz and 5 GHz Antenna type: built-in AP-mode: FAT AP Mulit SSID: up to 8 SSIDs Encryption: WPA-PSK, WPA2-PSK Manitancance: Telnet, TFTP, FTP, HTTP, web based on windows Interface: Giabit Ethernet port (1) Environment: Operating termperature: -10C~55C, humidity: 10%~95% Power supply: 12VDC, 1A BMS Wifi router 325, Plastic dustcover for adapter Plastic dustcover 12, BMS FlexCam adapter with WF10x eyepiece BMS FlexCam adapter 46, Microscope adapter Ø Ø 30mm for BMS tcam Designed for BMS types: 11, 140, 141, 143, 144 and TS-series Microscope adapter 12, Microscope adapter Ø Ø 30.5 mm for BMS Eyepiece & C-mount camera Power supply EURO for BMS EcoCam 5 & 8 output voltage: 5V output current : 3000mA Power supply 29, FlexCam icam S-VHS connecting wire, 5m FlexCam icam 20, AV-cable 3,5mm jackplug to 3x cinch AV-cable 3,5mm 14, BMS USB-adapter USB 2.0 type Grab- BeeX+ Comverts analog video to digital on CD and DVD Never has it been so easy to transfer your images from a microscope camera onto your PC. Requires only a PC with USB connection Universal Digitube adapter Finally a solution to connect almost any digital photo camera to a microscope, stereomicroscope or field scope. No hassle with certain types of cameras and the specific use of digital adapters, with or without compensation optics! Just mount the camera on the camera platform to be moved into the X and Y direction to position the camera in line with the eyepiece. Suitable eyepiece size: 28 ~ 45 mm (Ø) Platform load: max. 2.0 kg Materials: ABS, alloy of aluminium Height: 195 mm Weight: 350 g adapter 29,50 Designed for BMS microscopes: S10, S20 and ST BMS USB-adapter 49, Microscope adapter 12, BMS microscope-tft screen, 8 inch Special screen to watch images which are stored on memory card or project images directly from vcam camera card. Monitor: 8, TFT microscope-tft screen 99, Plug-in adapter C-mount 1/4 inch with compensation optics Plug-in adapter 49, Power supply UK for BMS EcoCam 5 & USB2.0 cable for BMS Eyepiece & C- mount camera long cable 190cm with USB2.0 plugs USB2.0 cable 16, Microscope adapter Inner diameter: 23,2 mm Outer diameter: 30,0 mm Microscope adapter 25,00 Universal TeleEye adapter for telescopes Similar to the Universal Digitube Adapter (76530), however with the following differences: Suitable eyepiece size: Ø mm Height: 230 mm Weight: 395 g adapter 29,50 output voltage: 5V output current : 3000mA Power supply UK 29, BMS FlexCam adapter Ø 35mm BMS FlexCam adapter 12,80 Plug-in adapter C-mount 1/2 inch with compensation optics Plug-in adapter 49,00 C to CS Mount adapter ring Required for lens compatibility between the camera and lens when the camera is a CS mount and the lens is a C mount C-CS mount adapter 6, Microscope adapter inner diameter: 23,2 mm outer diameter: 30,5 mm Microscope adapter 25,00 Cell phone holder for Digitube Upgrade your Digitube adapter with this special phone holder and take pictures right away with your iphone or cell phone. Materials: ABS, alloy of aluminium Weight: 100 g Cell phone holder 17, All prices in Euro excluding transport and VAT. 79

45 Cameras BMS digital cameras CHAPTER 3 CHAPTER 3 BMS digital cameras Cameras 766LB035X 766LB01X 766MQD ,35x C-mount for Labomed 1,0x C-mount for Labomed 0,70x C-Mount for Nikon 1,0x C-Mount for Olympus 1x C-Mount for Leica Adapter 0,37x 766LB035X 165,00 Compatible Sensor: 1/4 ~ 1/3 inch Field Size: 18 x 0,37=6,7 mm 766LB01X 1,0x C-mount for Labomed 766MQD , , , Adapter 0,37x 25,00 766LB050X 0,50x C-mount for Labomed 766MQD ,00x C-Mount for Nikon 766N ,63X C-Mount for Olympus Photo adaptor for OLYMPUS ,70x C-Mount for Leica Adapter 0,5x 766LB050X 165,00 766MQD ,00 766N , , ,00 Compatible Sensor: 1/2 ~ 2/3 inch Field Size: 18 x 0,5= 9 mm Adapter 0,5x 25,00 766LB065X 0,65x C-mount for Labomed 766LB065X 180,00 766MQD ,35x C-Mount for Nikon 766MQD ,00 766N ,35X C-Mount for Olympus 766N , ,00x C-Mount for Zeiss , ,55x C-Mount for Leica , Adapter 0,75x Compatible Sensor: 1/1,8 ~ 1 inch Field Size: 18 x 0,75= 12 mm Adapter, 0,75x 25,00 766LB075X 0,75x C-mount for Labomed 766LB075X 180,00 766MQD ,55x C-Mount for Nikon 766N ,5X C-Mount for Olympus ,00x C-Mount for Zeiss ,35x C-Mount for Leica Adapter ring, 23,2 to 30,0 mm 766MQD ,00 766N , , , Adapter ring 7, All prices in Euro excluding transport and VAT. 81

46 Cameras BMS digital cameras CHAPTER Adapter ring, 23,2 to 30,5 mm Lens 8mm for BMS FlexCam Adapter ring 7, Lens 8mm 205, Adapter ring, 23,2 to 31,75 mm Lens 25mm Adapter ring 7, Lens 25mm 205, A Aluminium adapter, 27,2 mm Aluminium case for BMS EcoCam A 25, Aluminium case 63, Lens 8mm, spare lens for EcoCam Lens 8mm 74,

47 BMS digital microscopes 4 BMS digital microscopes 84

48 BMS digital microscopes BMS digital microscopes CHAPTER 4 CHAPTER 4 BMS digital microscopes BMS digital microscopes BMS digital microscopes Microscope BMS 037 LED, digital Two microscope types in ONE - incident and transmitted light microscope! The new BMS 037 LED is an ideal starter microscope for hobbyists. The microscope s stability is optimized by the robust stand s and bases construction. Because of its cleverly placed handle in the stand the BMS 037 LED will move effortlessly wherever you need it to be. The enhanced LED illumination combines the advantages of an incident light type with a transmission type to a handy combined microscope. The transmitted and incident light are separately operable and are adjustable by a dimmer. Specifications Eyepiece: WF10x/18mm, locked Tube: 45 inclined Focussing mechanism: coarse focussing knobs Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Stage: with 2 stage clips and slide protection Condenser: fixed, N.A. 0,65 with a six aperture disc diaphragm Illumination: 1 LED incident and 1 LED transmitted light; incident light only suitable for the 40x and 100x magnification range Magnification: 40x, 100x and 400x Power supply: through 3 rechargable AA batteries 1300mACamera 1.3 megapixel Camera: 1/3 inch CMOS with DSP Resolution: 1280x1024 pixels (horizontal/vertical) Frame rate: 15fps at 1280x1024 pixels; 30fps at 640x480 pixels Pixels: 1,350,000 Digital port: USB 2.0, cable ca. 190cmIncluding: dust cover, 3 rechargable AA batteries 1300mA, USB cable, BMS_pix software and adapter with charge indicator Product code:75938brand:bmsavailable:27/02/2013 No alternative products found. Microscope BMS 037 LED Pro 75939, BMS, per pieceavailable 27/02/2013OrderQuantity Microscope BMS 037 LED, digital 250,00 Microscope BMS 100 FL digital 1,3 MP Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Head: 360 with inbuilt digital camera module 1,3 megapixels Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse and fine focussing knobs with slip clutch and slide protection Stage: 115 x 120mm with 2 stage clips Condenser: fixed, N.A. 0,65, with iris diaphragm and filter holder with blue filter Illumination: adjustable high power LED, rechargeable Input: 7,5V-300mA Magnification: 40x, 100x and 400x Detachable power cordcamera 1.3 megapixel Camera: 1/3 inch CMOS with DSP Resolution: 1280x1024 pixels (horizontal/vertical) Frame rate: 15fps at 1280x1024 pixels; 30fps at 640x480 pixels Pixels: 1,350,000 Digital port: USB 2.0, cable ca. 190cmProduct code:76458brand:bmsavailable:s ufficient stock Sensor type: CMOS Sensor: 1/3 in Pixel size: 3.6 x 3.6 µm Sensitivity: 1 Resolution: 1280 X 1024 pixels Frame rate: X 1024 Wave length: nm Dynamic range: 71 db Exposure range: ERS (Electronic Rolling Snap) Camera body: Round body, Ø 60 mm loose C-mount compensation optics Stereo adapter Ø 30mm Stereo adapter Ø 30.5 mm USB cable, 1.8 m Installation CD with complete software Operating system: Windows XP, Vista, W7, W8 & Mac 10.6Spark compatible: yes No related items found. Microscope BMS 100 FL digital 3 MP Eyepiece: WF10x/18mm with pointer, locked Tube: 45 inclined Head: 360 with inbuilt digital camera module 3 megapixels Nosepiece: triple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded) Focussing mechanism: coarse and fine focussing knobs with slip clutch and slide protection Stage: 115 x 120mm with 2 stage clips Condenser: fixed, N.A. 0,65, with iris diaphragm and filter holder with blue filter Illumination: adjustable high power LED, rechargeable Input: 7,5V-300mA Magnification: 40x, 100x and 400x Detachable power cordspecifications camera Camera: 1/2 inch CMOS with DSP/MTF Resolution: 2048x1536 pixels (horizontal/vertical) Pixels: 3,145,000 Scanning system: Progressive scan Dynamic range: >62 db Sensitivity: 1.0 lux Frame rate: 11fps at 2048x1536 pixels Electronic control: exposure, white balance and gain Iris diaphragm: automatic Communication protocol: USB v2.0 Operating systems: Windows XP, Vista & 7. Also compatible with Mac OSIncluding: dustcover, tension wrench, manual, USB cable, software (BMS_pix) Microscope BMS 100 FL digital 3 MP 375,00 Stereo microscope BMS ST-40-C-2L digital, LED Stand: stand with fixed arm Eyepieces: two WF10x/20mm, locked Tube: 45 inclined, one tube with adjustable diopter Interpupillary distance: 50 to 76mm adjustable Objectives: 2x and 4x through rotatable turret 2x: camera will produce an image with diametre of approx. 4.3 mm and the eyepieces an image with diametre of 9.5 mm. 4x: camera will produce an image with diametre of approx. 2.1 mm and the eyepieces an image with diametre of 4.7 mm. Focussing: coarse focussing knobs with slip clutch Illumination: incident and/or transmitted LED illumination Magnification: 20x and 40x Visual range: 10mm (2x) and 5mm (4x) Working distance: 48mm Base with Ø 95mm frosted glass and black/white plate with 2 stage clips Batteries: integrated in base Connection: 12V Charger: 230V/50Hz, detachable Build-in camera: DSP, 1.3 megapixel Resolution: 1200 x 1080 pixels (horizontal/vertical) Pixels: 1,300,000 Digital output: USB 2.0, cable 1.5m Software: BMS Photolib System requirements: Windows XP (SP2/3) and VistaIncluding: dust cover, tension key and eye caps Stereo microscope BMS ST-40-C-2L digital 310, Microscope BMS 100 FL digital 1,3 MP 299, All prices in Euro excluding transport and VAT. 85

49 BMS digital microscopes BMS digital microscopes CHAPTER 4 CHAPTER 4 BMS digital microscopes BMS digital microscopes Zoom stereo microscope BMS 143 with USB camera 3 megapixels Eyepieces: two WF10x/22mm with high-eyepoint eyepieces Tube: 45 inclined, with dioptric compensation on one tube, with inbuilt camera Interpupillary distance: 50mm to 76mm adjustable Zoom objective: stepless adjustable 0.7x to 4.5x Magnification: 7x to 45x Working distance: 108mm Focusing: coarse focussing knobs on both sides with tension control Hight adjustment by the pole by rack and pinion Illumination: incident and/or transmitted adjustable halogen illumination, 12V-15W Power supply: 220V-230V Detachable power cord Specifications camera Camera: 1/2 inch CMOS with DSP/MTF Sensitivity (v/lux-sec@550nm): 1.5 Resolution: 2048x1536 (horizontal/vertical), 6fps at 2048x1536 Pixels: 3,145,000 Wave length: nm Dynamic range: 75 db Digital port: USB 2.0, cable ca. 190cm Operating system: Windows XP (SP 2/3) and VistaIncluding: dust cover, eye caps, manual, Ø 95mm black/white plate and frosted glass plate, BMS PhotoLib Software Zoom stereo microscope BMS 143 with USB camera 3 MP 999,00 Microscope BMS D1-dig A 1000x This binocular microscope has a built-in digital camera module, high resolution objectives and two wide field (WF) eyepieces with plan optics. The optics allow the user to view colourful, high contrast, clear images. The stability of the microscope is guaranteed by the solid design of the stand and its base. The stand also has a wide window on the rear. The BMS D1 microscope is equipped with a large stage and an integrated movable specimen holder. The large working surface, 140 x 150 mm, easily allows two slides at once. The integrated X-Y specimen holder is simple to operate thanks to the ergonomically placed coaxial controls. The Abbe condenser comes complete with a slot for inserting various accessories such as dark field or phase contrast sliders. The condenser can be adjusted in height using the rack and pinion system. All optical surfaces (eyepiece and objectives) are coated with an anti-fungus layer. The new generation LED illumination gives comfort and rest to the eye. The variable intensity can be compared with a 30W halogen light source. The spectrum of the LED is equal to that of natural day light. Specifications microscope Eyepieces: WFP 10x / 18mm with foldable eye guard Tube: 45 inclined, 160 mm tube length, with grub screw to lock in the eyepiece Head: binocular, Siedentopf type with inbuilt digital camera module 2 megapixels, 360 rotatable, with lock bolt and milled edged screw, compensation free Nosepiece: quintuple, ball bearing type with rubber grip Objectives: DIN achromatic High Resolution, 4x (N.A. 0.10), 10x (N.A. 0.25), 40x (N.A. 0.65), 100x (N.A. 1.25) oil immersion. The 40x and 100x objectives are spring loaded (for slide protection) Focusing: coaxial coarse and fine adjustment on both sides. Fine adjustment is supplied with a scale division. Each division equals mm (0.30 mm/rotation) Stage: 140 x 150 mm, suitable for two slides at one time. Equipped with integrated movable specimen holder with ergonomically placed coaxial controls for accurate X-Y movement. Range 77 x 52 mm Condenser: Abbe condenser (N.A. 1.25) in holder, with centering screws. Adjustable height via rack and pinion. With iris diaphragm (0-100% adjustable). With slot for inserting various accessories, e.g. dark field or phase contrast sliders (optional) Illumination: new generation LED (3 Watt). Light intensity is continuously variable by means of potentiometer. Intensity comparable with 30W halogen Life span LED: approx. 50,000 hours Magnification: 40x, 100x, 400x and 1000x. Optional to be extended to 1500x Voltage: V / 50 Hz. The electric circuit is protected by a dual fuse system Detachable power cordsupplied complete with dust cover and user manual Specifications camera Camera: integrated in head CCD sensor: 1/4 inch Color CMOS sensor with DSP Effective pixels: 2048 x 1536 Pixels: 3,100,000 Scanning system: Progressive scan Dynamic range: >62 db Sensitivity: 1.0 lux Frame rate: x 960 Electronic control: exposure, white balance and gain Iris diaphragm: automatic Communication protocol: USB v2.0 Operating system requirement: Windows XP (SP2/3), Vista or W7/W8Including: USB-cable, software CD (BMS PhotoLib) Microscope BMS D1-dig A 1000x 775, Microscope BMS D1-dig P 1000x 999, All prices in Euro excluding transport and VAT. 87

50 BMS digital microscopes BMS digital microscopes CHAPTER 4 CxL LED digital microscope, 3 MP camera Microscope Specifications: Optical system: Antifungal Finite optical system Stand: Single mold sturdy stand with antirust materials. Extended base with hand rests for enhanced stability and comfort Viewing Bodies: Rotating binocular tube, 45 inclined, 360 rotatable when lockedin, Interpupillary distance 54-74mm with fixed 3.1 mega pixel camera module ivu 3100 Eyepieces: Wide Field focusable paired eyepiece WF 10x/18mm, with foldable eyeguard, lockable, antifungal coating Nosepiece: Quadruple nosepiece (Ball-bearing type) with rubber grip Objectives: LP series DIN Semi-Plan Achromatic objectives, antifungal 4x/NA 0.10/ WD 8.83mm, 10x/NA 0.25/WD 0.66mm, 40x (spring)/na 0.65/WD 0.49mm 100x (spring loaded, oil)/na 1.25/WD 0.14mm Mechanical Stage: Rectangular stage plate size 135 x 124mm, X/Y travel range 76 x 50mm. Low drive movement controls. Condenser: Sub-stage Abbe condenser NA 1.25 with aspheric lens. Iris diaphragm with snap-in blue filter. Rack and pinion movements on metal guides. Focusing: Feather touch tension adjustment free co-axial coarse and fine focusing for ultra smooth movement. Fine focus graduation 0.3mm per rotation Illumination: LED illumination, variable illumination control, rechargeable battery, LED life up to 50,000 hours. Electrical: Universal input 100V-240V AC, 50/60 Hz Camera Specifications: Sensor: 1/2 inch 3.0 Megapixel Color CMOS Active area: 4.52mm x 3.40mm Sensor resolution: 2048 x 1536 pixels Scan Mode: Progressive Pixel Size: 2.2 x 2.2µm Digitization: 12 Bit RGB Pixel clock: 48 MHz Dynamic range: 56 db (measured at 10 ms exposure) Max. exposure: 2S (Automatic Exp, WB, BL) Frame rate: 30 fps (640 x 480) Image resolution: Standard: 2048 x 1536, Binning 1024 x 768 and 640 x 480 Digital interface: USB 2.0 Optical connection: C-Mount Power consumption: approx. 1.9W Ambient conditions: Temperature: -30 C +70 C, Humidity: up to 80%, not Condensing System requirements: Microsoft XP/Vista/7 Ghz CPU, 2GB RAM (if 1GB, recommend 64MB graphics card), USB 2.0 PixelPro Image Analysis Software for capturing still images and videos. Software provides an easy to navigate user interface designed for routine analysis. Control features include Auto White Balance and Auto Exposure adjustments, Picture quality adjustments, Annotations, Measurement functions & Calibration, Region of Interest selection, Archival of images in an easy to use gallery, and a variety of resolutions to view images at. Software is compatible with Windows XP/Vista/7 Operating Systems Package: USB cable, software CD Packed in styrofoam box, with operation manual, allen wrench, Nylon dust cover, cleaning cloth, power cord, spare bulb, spare fuse and 10ml immersion oil TYPE A CxL LED digital microscope, 3 MP camera 1850,

51 Polarisation microscopes 5 Polarisation microscopes 90

52 Polarisation microscopes Polarisation microscopes CHAPTER 5 CHAPTER 5 Polarisation microscopes Polarisation microscopes Polarisation microscopes Microscope BMS 1001RMS The BMS 1001 microscope is a high quality, robust and well equipped microscope ideal for school, study and hobby purposes. The microscope s stability is optimized by the robust stand s and bases construction. The transmitted light illumination of BMS 1001RMS is performed by a LED with dimmer (for continuous variation of light intensity). All objectives are DIN achromatic Semi Plan. With the 10x wide field eyepiece you get a total magnification range of 40x-200x (optional 400x, 600x and/or 1000x). The optical ingredients provide sharp, clear and true-colour images with high-contrast. The microscope has a 360 rotatable monocular viewing and standard coarse and fine focusing drive. With useful accessories you can build this microscope into a more powerful system. Eyepiece: Wide field 10x/18mm with pointer, locked Tube: 45 with switchable analyzer Nosepiece: quadruple Objectives: DIN achromatic Semi Plan 4x, 10x and 20x (spring loaded). You can opt for 40x, 60x and/or 100x Focussing mechanism: coarse and fine focus controls Stage: with 2 stage clips Condenser: fixed, N.A. 0,65 with disc diaphragm Disc diaphragm: 3x standard holes, 1x polarizer, 1x darkfield Illumination: LED (15-20W) with dimmer Magnification: 40x, 100x and 200x (optional expandable :400x, 600x and 1000x) Voltage: 230V / 50HzIncluding: dust cover, manual, power cord and tension wrench Microscope BMS E1-220 POL SP This binocular Polarizing Microscope is ideal for Geology, Petrology, Mineralogy and Medicine. Eyepieces: WF 10x/18mm with built-in cross line reticle. Binocular head: with a 55mm - 75mm IPD range, built in Bertrand Lens and Analyzer all of which can be removed from the optical path allowing for both brightfield and polarized uses. Stage: the fully rotatable stage is 160mm in diameter, has ball bearing movement, detachable stage clips, an adjustable screw stop, and graduation marks every degree. Objectives: DIN Semi Plan 4x, 10x, 20x and 40x yielding magnification of 40x, 100x, 200x and 400x Condenser: an Abbe Condenser 1.25 N.A with iris and swing out filter holder (included blue filter) is controllable by rack & pinion movement. Focusing mechanism: co-axial coarse & fine adjustment mechanism with interior steel gears for precison focus movement. Illumination: built in universal power supply 6v 30w variable halogen light source.the objectives and condenser are centerable to ensure proper polarizing viewing. Included with the microscope is a quartz wedge compensator, mica compensator 1/4 wavelength, gypsum compensator one wavelength. This model comes with a manufactures five year warranty and free extended one year warranty for a total of six years Microscope BMS E1-220 POL SP 1550,00 Microscope BMS E1-223 POL SP Microscope BMS 1001RMS 225,00 Microscope BMS 136 PLAsQ POL Halogen Polarizing microscope Eyepiece: WF10x/18mm Tube: 45 inclined, not rotatable Nosepiece: quadruple Objectives: DIN achromatic 4x, 10x and 40x (spring loaded). Positive click stops provided with ribbed grips for easy rotation mounted on a precision ball bearing mechanism for smooth and accurate alignment. Focussing: co-axial ball bearing guideways coarse and fine focussing knobs on both sides, with covers on the knobs. Stage: rotatable and round object table with scale. Approx Ø: 125mm with fine vernier gradiations. Provided with stage clamps for holding the specimen. Sub-stage condenser: Abbe condenser N.A in centrable holder, adjustable in height through rack and pinion. The condensor has a filter holder, removable blue filter and a built-in iris diaphragm Illumination: built-in, adjustable halogen illumination 12V-20W Magnification: 40x, 100x and 400x Power supply: V/50Hz with fuseincluding: detachable power cord, dust cover, blue filter and manual. This trinocular Polarizing Microscope is ideal for Geology, Petrology, Mineralogy and Medicine. Eyepieces: WF 10x/18mm with built-in cross line reticle. Trinocular head: with a 55mm - 75mm IPD range, built in Bertrand Lens and Analyzer all of which can be removed from the optical path allowing for both brightfield and polarized uses. Stage: the fully rotatable stage is 160mm in diameter, has ball bearing movement, detachable stage clips, an adjustable screw stop, and graduation marks every degree. Objectives: DIN Semi Plan 4x, 10x, 20x and 40x yielding magnification of 40x, 100x, 200x and 400x Condenser: an Abbe Condenser 1.25 N.A with iris and swing out filter holder (included blue filter) is controllable by rack & pinion movement. Focusing mechanism: co-axial coarse & fine adjustment mechanism with interior steel gears for precison focus movement. Illumination: built in universal power supply 6v 30w variable halogen light source.the objectives and condenser are centerable to ensure proper polarizing viewing. Included with the microscope is a quartz wedge compensator, mica compensator 1/4 wavelength, gypsum compensator one wavelength. This model comes with a manufactures five year warranty and free extended one year warranty for a total of six years Complete electrical system is CE approved and tested Microscope BMS 136 PLAsQ POL Halogen 379, Microscope BMS E1-223 POL SP 1750, All prices in Euro excluding transport and VAT. 91

53 Polarisation microscopes Polarisation microscopes CHAPTER 5 Microscope BMS D1-223 POL PLAN This trinocular microscope is specially designed for research in the field of geology, petrography, mineralogy and medical science. Trinocular microscope with high resolution plan objectives and two wide field eyepieces with plan optics. The high standard optics provide a clear, sharp, colourful and rich in contrast image. The firm and solid construction of the stand guarantee the stability of the microscope. The integrated stage can be easily rotated and can be positioned in an easy and accurate way. The rotatable polarizer is attached to the in height adustable Abbe condenser (NA 1.25). All optical surfaces of eyepieces and objectives have been treated an anti-fungus coating. The lamp house has a Köhler illumination, with iris diaphragm, and carries the LED illumination. This new generation LED delivers an amount of light that best can be compared with a 30 Watt halogen light source. The spectrum of the LED illumination is similar to natural day light. This is comfortable and restful for the eyes. Technical specifications Eyepieces: WFP 10x/18mm, with foldable eye guards, anti-fungus coating. Tubus: 45 inclined, 160mm mechanical tube length, with grub screw to lock in the eyepiece. Head: trinocular, 360 rotatable, with lock bolt and milled edged screw. IPD 50-72mm. Built-in Betrand lens with focussing knob. Bertrand lens and analyzer can be removed. Analyzer: pull out mechanism with graduation, mounted in head. Nosepiece: quadruple, ball bearing type. Objectives: DIN Plan achromatic High Resolution, 4x (N.A. 0.10), 10x (N.A. 0.25), 40x (N.A. 0.65) spring loaded (for slide protection). Objectives can be centered. Focusing: coaxial coarse and fine adjustment on both sides. Fine adjustment is supplied with a scale division. Each division equals mm (0.30mm/rotation). Stage: circular, ball bearing, with graduation, can be rotated over 360, 160mm diameter with locking screw. With removable stage clips. Compensation filters: sliders. Quartz, mica 1/4 and gypsum red 1st order. Condenser: Abbe condenser (N.A. 1.25) in holder, to be centered by means of screws. Adjustable in height via rack and pinion. With iris diaphragm (0-100% adjustable). The polarizer is mounted under the condenser. Illumination: new generation LED (3 Watt). Light intensity is continuously variable by means of potentiometer. Intensity comparable with 30W halogen. Köhler illumination, with iris diaphragm. Life span LED: approx. 50,000 hours. Voltage: V / 50 Hz. The electric circuit is protected by a dual fuse system. Detachable power cord.objectives and condenser can be centered in order to guarantee excellent polarisation observations. Supplied with dust cover and user manual Microscope BMS D1-223 POL PLAN 1750,

54 Illumination 6 Illumination 94

55 Illumination Illumination CHAPTER 6 CHAPTER 6 Illumination Illumination Illumination BMS ring light 60 LEDs for BMS 11 & Mounting-Ø: 45 to 60 mm Amount of LEDs: 60 high-power LEDs Light intensity: adjustable 0-100% Colour temperature: 6500K Designed for stereo microscopes BMS 11 and NO mounting adapter (75021) included for BMS 11 and Input voltage: 12 VDC, 600 ma Comes complete with Euro power supply 100~240 VAC Cold light source LED 24W (=150W halogen) When light is wanted but you can do without heat. This light source projects brilliant white light (natural colour). Ideal for temperature critical applications. Light is transported through a fibre optic system from source to object. Produces no heat near the object. The heat stays in the housing and is transported without mechanical cooling. This LED light source makes therefore no sound. Includes a double flexible fibre optic light guide with focussing lenses at the end. The light beam can be focussed by the lenses. The gooseneck allows specific positioning of the light beam BMS ring light 60 LEDs for BMS 11 & ,00 BMS ring light 60 LEDs, adjustable, 4Q 4 segments adjustable on/off Mounting-Ø: 45 to 60 mm Amount LEDs: 60 high-power LEDs Light intensity: adjustable 0-100% Inner-Ø: 60 mm Colour temperature: 6500 K Designed for stereo microscopes: BMS 11 and NO mounting adapter (75021) included for BMS 11 and Input voltage: 12 VDC, 600 ma Comes complete with Euro power supply 100~240 VAC BMS ring light 60 LEDs, adjustable, 4Q 120,00 Possibility to fit color filters in the fiberglass holder. The following colours are available: yellow, red and blue. Main power : 90~240 V, 50 Hz Fuse: T250V/5A ESD safe RoHS CE Fiber optics: two-armed with focussing lens Colour temperature: 6000~7000 K Fiber optics port: 5/8 inch Bulb : 24W LED Bulb life: 10,000 hours Lamp housing: space-saving Detachable power cord Cold light source LED 24W 369,00 Ring light guide for BMS ring light 56 LEDs, adjustable Mounting-Ø: 45 to 60 mm Amount of LEDs: 56 high-power LEDs Light intensity: adjustable Designed for stereo microscopes BMS 11 and NO mounting adapter (75021) included for BMS 11 and Comes complete with power supply and control unit for stepless adjustable light intensity Ring light with flexible arm for ideal, uniform illumination. Length flexible arm: 830 mm Mounting-Ø light source: 15 mm Diameter mouting opening ring light: 55 mm WITHOUT mounting adapter Ring light guide for , BMS ring light 56 LEDs, adjustable 149,00 BMS PL ring light Mounting-Ø: 45 to 60 mm Light intensity: not adjustable Designed for stereo microscopes BMS 11 and NO mounting adapter (75021) included for BMS 11 and Comes complete with power supply. Ring light guide Ring light with flexible arm for ideal, uniform illumination. Length flexible arm: 830 mm Mounting-Ø of light source: 15 mm Mounting-Ø opening ring light: 50 mm Supplied WITHOUT mounting ring (75021) Ring light guide 189, BMS PL ring light for BMS 11 and series 65,00 Objective ring without lens, 50mm Objective ring without lens, 50mm 5, Light guide with 90 output Light guide with flexible gooseneck. Length flexible gooseneck: 830 mm Mounting-Ø light source: 15 mm Output-Ø: 10 mm Output: 90 bent Light guide with 90 output 149, All prices in Euro excluding transport and VAT. 95

56 Illumination Illumination CHAPTER

57 BMS Dissection 7 BMS Dissection 98

58 BMS Dissection BMS Dissection CHAPTER 7 CHAPTER 7 BMS Dissection BMS Dissection BMS Dissection Dissecting set without case forceps needle spatula scalpel seeker pair of scissors dropper Dissecting set without case 6,25 Anatomical dissecting set This set is supplied in a imitation leather case. All parts are also sold separately. The set consists of: 16884: scissors, straight, sharp points, 105mm 16883: pair of scissors, sharp points, blund, 140mm 16911: set of 5 blades, sharp points (2x) 16581: forceps, straight, blunt, 130mm 16630: seeker 16629: scalpel/anatomic knife 16650: chain hooks 16910: scalpel handle No : dissecting case Dissecting set Anatomical dissecting set 26, This simple set is supplied in a stackable transparent plastic box. All parts are also sold separately. Dissecting set This set consists of: 16610: needle with holder, straight (2x) 16591: microscopic forceps (fine tip) 130mm 16884: scissors, straight, sharp points 105mm 16910: scalpel handle No : set of 5 blades, slightly curved 16641: plastic box, stackable Dissecting set 12,20 Dissecting set This advanced set is supplied in a imitation leather case. All parts are also sold separately. The set consists of: 16610: needle, straight (2x) 16615: needle, lancet shaped 16581: forceps, straight, blunt, 130mm 16591: forceps, straight, sharp points, 130mm 16884: scissors, straight, sharp points, 105mm 16910: scalpel handle No.4, 110mm 16911: set of 5 blade, slightly curved 17121: spatula 16644: dissecting caseall packed together in the case. Case with Breukhoven name This simple set is supplied in a stackable transparent plastic box. All parts are also sold separately Dissecting set 20, This set consists of: 16610: needle with handle, straight (2x) 16591: microscopic forceps (fine tip) 130mm 16884: scissors, straight, sharp points 105mm 16910: scalpel handle No : set of 5 blades, slightly curved 15903: 2 in 1 magnifier, Ø 60 and Ø 20mm, magnification 3x and 6x 16641: plastic box, stackable Dissecting set 13,15 Dissecting set, 5-parts in imitation leather case 16884: scissors, straight, sharp points, 105mm 16591: straight forceps, sharp points 130mm 16910: scalpel handle No.4, 110mm 16610: needle, straight 16911: set of 5 blades, sharp points Dissecting set 16591: straight forceps, sharp points, 130mm 16884: scissors, straight, sharp points, 105mm 16885: scissors, curved, sharp points, 105mm 16635: flat and hollow razor 16910: scalpel handle No.4, 110mm 16610: needle, straight (2x) 16615: needle, lancet shaped 16911: set of 5 blades, sharp points 16644: dissecting caseall packed together in the case. Case with Breukhoven name Dissecting set 32,00 Pure white BMS cover slips, 100 pieces Dissecting set, 5-parts in case 11,00 Ø 18mm thickness: mm in plastic box Pure white BMS round cover slips 1, Pure white BMS cover slips, 100 pieces Ø 16 mm thickness: mm in plastic box Pure white BMS cover slips 1, All prices in Euro excluding transport and VAT. 99

59 BMS Dissection BMS Dissection CHAPTER 7 CHAPTER 7 BMS Dissection BMS Dissection Pure white BMS round cover slips, 100 pieces Coverglass forceps Ø 13 mm thickness: ,13 mm in plastic box Pure white BMS round cover slips 1,30 Tips: smooth Shape of tips: angled Alloy: stainless steel Length: 105mm Coverglass forceps 105mm 2, Pure white BMS cover slips, 100 pieces Splinter forceps packet in transparant box size: 22x64 mm thickness: mm Length: 140mm Sharp tip Made of stainless steel Pure white BMS cover slips 1, Splinter forceps 140mm 3, Pure white BMS cover slips, 80 pieces Galvanic forceps size: 22 x 50 mm thickness: mm in plastic box Pure white BMS cover slips 1, Galvanic forceps 3,70 Needle, straight with plastic handle Micro life objectglas Needle length: 35mm Gebruik nu uw levende materiaal direct onder de microscoop met dit doorstroom objectglas. Ideaal voor het practicum Needle, straight with plastic handle - 35mm 0, Micro life micro slide 42,90 Needle, lancet-shaped with plastic handle BMS microscope slides with single cavity, 50 pieces per box Needle length: 35mm ISO 9001 Size 76x26mm Ground edges With ground-in and polished cavity Ø 15-18mm Thickness: mm Needle, lancet-shaped with plastic handle - 35mm 1,45 Needle holder for and BMS microscope slides 11, Needle holder 3, Stage micrometer graticule 1mm in 0.01mm Needle, straight, without plastic handle Length: 50mm Stage micrometer graticule 1mm in 0.01mm 22, Needle, straight without plastic handle - 50mm 0, Surgical/Tissue forceps 2 x 3 teeth Needle, lancet shaped without plastic handle Length: 140mm To grasp and separate the skin and connective tissue on specimens during dissection Made of stainless steel Corrugated sides 2 x 3 teeth Length: 50mm Needle, lancet-shaped without plastic handle - 50mm 0, Surgical/Tissue forceps 2x3 teeth 140mm 2, All prices in Euro excluding transport and VAT. 101

60 BMS Dissection BMS Dissection CHAPTER 7 CHAPTER 7 BMS Dissection BMS Dissection Cartilage knife Glass dropper with rubber bulb, 12 pcs Stainless steel Cartilage knife 4, Glass dropper with rubber bulb, 12 pcs 4, Seeker/Probe with handle Dissecting case Seeker/Probe with handle 2,65 Made of synthetic leather Case with Breukhoven name Dissecting case 3, Double-End Seeker/Probe double-ended length: ca. 130mm Plastic box Double-End Seeker/Probe 1, Plastic box 1, Sectioning Razor Microtome cube flat one side, the other being hollow ground Sectioning Razor 4, Microtome cube Dissecting tray with wax Cylindrical handmicrotome with table clamp and blade High-quality Work surface: 14x22 cm Type: beeswax Material tray: stainless steel Product dimensions: 310 x 200 x 50 mm Well suited for laboratory work and school purposes Reusable after melting the wax Cylindrical handmicrotome 63, Dissecting tray with wax 21,00 Three meathooks on chain Dissecting tray I Three meathooks on chain 2, size: 25 x 18 cm Dissecting tray I 18,50 Pair of scissors length: 175 mm stainless steel Dissecting tray II size: 30 x 21 cm Pair of scissors 175 mm 4, Dissecting tray II 19,90 Pair of scissors Dissecting tray III length: 160 mm stainless steel size: 34 x 25 cm Pair of scissors 160 mm 3, Dissecting tray III 22, All prices in Euro excluding transport and VAT. 103

61 BMS Dissection BMS Dissection CHAPTER 7 CHAPTER 7 BMS Dissection BMS Dissection Paper scissors Steel, curved scalpel blade, No.21/24, 35mm for No.4, 5 pieces length: 250mm stainless steel Paper scissors 250mm 3, Steel, curved scalpel blade, No. 21/24 1, Pair of scissors Steel, sharp scalpel blade No.11, 50mm for No.3, 5 pieces sharp points, blund length: 140 mm stainless steel Pair of scissors sharp points/blund 140 mm 2, Steel, sharp scalpel blade No. 11, 5 pieces 1,00 Razor blades with security strip Microscopic scissors straight, sharp points length: 105mm stainless steel Razor blades with a security strip on one side to prevent injuries. Blades of good quality for simple and safe cutting freehand. 5 pieces per box Razor blades with security strip 1, Microscopic scissors, straight/sharp points 105 mm 3,25 Extraction blade Curved microscopic scissors sharp points length: 105mm stainless steel Curved microscopic scissors, sharp points 105 mm 3,70 Flexible blade of stainless steel, blade length 50x15mm with handle Extraction blade 4,70 Immersion oil, 5ml Paper scissors Immersion oil, 5ml 4, length: 170 mm stainless steel Microscope slide box for 5 slides Paper scissors 170 mm 4,30 size: 90 x 32 x 21 mm Scalpel handle No.3, 100mm Microscope slide box for 5 slides 2, Microscope slide box for 25 slides Scalpel handle No.3, 100mm 2,85 Scalpel handle No. 4, 110mm Dimensions: 140 x 100 x 35mm Microscope slide box for 25 slides 3, Microscope slide box for 50 slides Scalpel handle No. 4, 110mm 2,10 Steel, lancet shaped scalpel blade, No.23, 35mm for No.4, 5 pieces Dimensions: 270 x 100 x 35mm Microscope slide box for 50 slides 4,50 Microscope slide box for 100 slides Dimensions: 270 x 190 x 35mm Steel, lancet shaped scalpel, No. 23 1, Microscope slide box for 100 slides 5, All prices in Euro excluding transport and VAT. 105

62 BMS Dissection BMS Dissection CHAPTER 7 CHAPTER 7 BMS Dissection BMS Dissection Folding linen tester magnifier This linen tester is a compact, fold out loupe magnifier featuring a 7.5x power 19mm lens. It contains markings in both inches and milimeters for easy measuring of small parts. Perfect for stitch counting or anything requiring accurate small measurements. This magnifier is portable, lightweight and folds flat for storing when not in use. Lens Ø: 19mm Magnification: 7.5x Staining rack for 12 slides Dimensions 95mm x 125mm x 32mm It holds 75mm x 25mm slides in slots numbered 1 to Staining rack for 12 slides 19, Folding linen tester magnifier 4,60 Aplanatic hand magnifier Folding pocket magnifier single lens lens Ø 22mm magnification 4x Lens Ø: 18mm Magnification: approx. 10x Folding Pocket Magnifier with single lens 3, Aplanatic hand magnifier 12,00 Folding Pocket Two-Lens Magnifier Hand magnifier round magnifier lens Ø: 75mm magnification: 3x spherical plastic handle two-lens model lens Ø 22mm magnification 4x and 8x Folding Pocket Two-Lens Magnifier 2, Hand magnifier 3x/ Ø 75mm 5,00 Folding Pocket Three-Lens Magnifier Hand magnifier three-lense model lens Ø 22mm magnification: 4x, 8x and 12x round magnifier lens Ø: 50mm magnification: 3x spherical plastic handle Folding Pocket Three-Lens Magnifier 3, Hand magnifier 3x/Ø 50mm 3, Scalpel, stainless, round 3, Magnifying glass on stand BMS dbox, small Prefocused dual lenses for viewing insects, plants, coins, stamps, maps, books, graphics etc. Clear acrylic base permits ambient light to illuminate subject for clear, bright viewing Hands-free observation Magnification: 5x Housing Ø: 100 mm Lens Ø: 75 mm BMS dbox, small 5, Magnifying glass on stand 5x/Ø 75mm 7,70 Magnifier with stand Permits the use of both hands. Heavy metal base makes this a sturdy magnifier. metal base 3-way head lens Ø: 90mm magnification: 2.5x and 6x with LED illumination and batteries Stand Magnifier 2.5x and 6x, Ø 90mm 16, All prices in Euro excluding transport and VAT. 107

63 BMS Dissection BMS Dissection CHAPTER

64 Primary 8 Primary 110

65 Primary Primary CHAPTER 8 CHAPTER 8 Primary Primary Primary Two-Way Bug Viewer with handles This Two-Way Viewer allows you to view an object from two different angles, top and bottom. Small objects like insects, grass and leaves can be placed in the tray and viewed from both angles. In addition, two people can view an object at the same time. By switching eyepieces they will be able to see the top and bottom of the object. magnification 4x, allows two people to observe simultaneously top and bottom view easy grip handles plastic spider not recommended for children under 5 years of age Magnifying glass on stand Prefocused dual lenses for viewing insects, plants, coins, stamps, maps, books, graphics etc. Clear acrylic base permits ambient light to illuminate subject for clear, bright viewing Hands-free observation Magnification: 5x Housing Ø: 100 mm Lens Ø: 75 mm Magnifying glass on stand 5x/Ø 75mm 7, Two-Way Bug Viewer 4,30 Three section bug viewer Magnification 2x and 3,5x compact and removable design with grid plastic spider Field trip container with forceps container for flora and fauna collection lid contains 3 magnifiers (magnification 5x) grid in base (cm and inch) carrying strap Field trip container 9, Three section bug viewer 2,50 Naturebox Bug viewer Double magnifying glass to observe insects, permitting the viewing of living insects due to its air vent system. Also useful for observing aquatics, feathers, flowers, leaves, coins and other small objects. Large lens diameter 45mm Small lens diameter 35mm Magnifications 2x and 4x Jar dimensions 70 x 70 x 75mm Suitable for ages 4 and upbug viewer comes complete with plastic spider Bug viewer 2x/4x, 150 ml 2,25 Two section bug viewer Insectenhouder met schroefdeksel met ingebouwd vergrootglas Schepnetje Loep met steel Pincet Nature exploring 12,50 The Aqua Scope is used for Secchi disk readings as well as aquatic plant and animal observations. The innovative design eliminates both surface glare as well as internal reflection. Features include a black interior, flotation collar and neoprene viewing mask for eliminating peripheral light, and a comfortable handle. The features combine to allow consistent viewing parameters regardless of environmental conditions movable, with grid for measurement and ventilation holes compact design plastic spider Two section bug viewer 1,90 diameter: 110 mm lengthe: 600 mm Aqua Scope 49, Magnifier Insectenloep Compact model met schaal en ventilatie. Levering is inclusief kunststof spin. 2 in 1 magnifier Ø60 and Ø20mm magnification 3x and 6x Bug viewer 1, Magnifier 1, Magnifier with stand Pocket scope 30xModel 2 in 1 with torch Permits the use of both hands. Heavy metal base makes this a sturdy magnifier. metal base 3-way head lens Ø: 90mm magnification: 2.5x and 6x with LED illumination and batteries Stand Magnifier 2.5x and 6x, Ø 90mm 16,00 pocket scope, magnification 30x torch travel case work station bulb replacement tool manual (English) 2x AAA batteries not included 15915A Pocket scope 30x 10, A All prices in Euro excluding transport and VAT. 111

66 Primary Primary CHAPTER 8 CHAPTER 8 Primary Primary Set of slides, set 1 Insecten observatie set slides with 3 objects (in total 18), with liquids, grasshopper, medicaments and starch Set of slides, set 1 7,90 Insecten terrarium Vergrootglas Insectenpot met ventilatiegaten en meetscala Vangnet met handvat Pincet Gebruiksaanwijzing (Engels) Set of slides, set 2 6 slides with 18 assorted specimens, micro film, natural fibres, insects, algae, vitamins and fungi Set of slides, set 2 7,90 Dissecting set without case Bug barn kit 12,50 Butterfly garden Watch the catarpillars grow into butterflies and let them go Learn about the amazing life cycle of butterflies and how they transform The garden works as a living environment and can also be used as a net to catch butterflies Include detailed instruction manual with activities forceps needle spatula scalpel seeker pair of scissors dropper Dissecting set without case 6,25 Model Torso Butterfly garden 17,00 Giant teeth model Twice life size, giant teeth model. Can be used to demonstrate dental hygiene and tooth care. Comes complete with giant toothbrush Giant teeth model 24, natural colours 27cm 8 parts Model Torso 27,50 Grondzeven Set van 6 stapelbare lunststof zeven met geperforeerde zeefplaten, deksel en bodembak. Elke zeef kan apart of in combinatie met deksel en bodem gebruikt worden. Maaswijdten: 1,940 mm - 0,930 mm - 0,466 mm - 0,263 mm - 0,122 mm - 0,062 mm. Basis Skeleton Sieves 50, A10BR Economicaly priced, simple Version for school use. Rotation joints at shoulder and hip, moveable legs and arms. Arms and Legs can be removed. Delivered on 4-leg stand on castors. Height 165cm 77A10BR Basis Skeleton 149,00 Stethoscope Binocular, magnification 8x, 40mm front lens Aspherical optical technology (95% distortion free) Standard porro type Magnification: 8x Diametre front lens: 40mm Field of view at 1000m (m): 140 Field angle: 8 Tinted lenses Rubber armored bodyincluding: carry case, strap and lens cloth Just like the one your doctor uses Stethoscope 9, Binocular 8x40 33,40 Mirage Pumping heart The 3D working heart features a detailed clear heart with chambers that represent the atrials and ventricles. Veins and arteries of clear tubing connect to body parts shown by the engravings on the display stand. Squeeze bulb pumps simulated blood through clear heart chambers just like a real heart does Height: 28 cm Complete with instructions for assembling Acrylic paint and brush are included Mirage 38, Pumping heart 11, All prices in Euro excluding transport and VAT. 113

67 Primary Primary CHAPTER 8 Insects exploring kitnot suitable for children under 6 years multi-level ant house two way bug viewer with handles fully illustrated colour instruction booklet Insects exploring kit 7,

68 Laboratory 9 BMS A6 116 BMS C2-series 117 Inverted microscope 120 Inspection 121 Spectrophotometer 122

69 BMS A6 Laboratory CHAPTER 9 CHAPTER 9 Laboratory BMS C2-series BMS A6 Microscope BMS A6-220 The BMS A6 series is specially designed to meet all demands for high standard laboratory work, (hospital) research and universities. Specifications Eyepieces: WF 10x/22 mm, high eyepoint Tube: Binocular, 30 inclined, Siedentopf, IPD mm Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) with slide protection and 100x (1,25) oil, with slide protection Focusing: Bi-lateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: rectangular 185 x 142 mm, high precision XY-movement by ergonomic positioned coaxial knobs Condenser: Abbe condenser 0.9/1.25 NA with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 12V - 50W halogen with tension control, Köhler illumination with field diaphragm Microscope BMS A ,00 Microscope BMS A6-220, asbestos edition The BMS A6 series is specially designed to meet all demands for high standard laboratory work, (hospital) research and universities. Specifications Eyepieces: WF 12.5x mm, high eyepoint, is provided with Walton & Becket graticule Tube: binocular, 30 inclined, Siedentopf, IPD mm adjustable Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) spring loaded and 100x (1,25) oil, spring loaded Focusing: Bi-lateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: rectangular 185 x 142 mm, high precision XY-movement by ergonomic positioned coaxial knobs Condenser: Abbe condenser 0.9/1.25 NA with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 12V - 50W halogen with tension control, Köhler illumination with field diaphragm Microscope BMS A6-220, asbestos edition 1950,00 BMS C2-series BMS C2 microscopes Microscope BMS C2-220 Efficient, flexible, stabile and comfort in use are just a few descriptions highly applicable to the BMS C2 series. The BMS C2 series are specially designed for versatile purposes. Whether it is used for routine or laboratory purposes, or used in hospitals, research institutes, universities or colleges, it will meet all demands. Because of higher capability with lower price and humanized configuration design, it also becomes the first choice of individual, Schools, and Scientific research organization. The ergonomic design, low positioned controls for focusing and the mechanical stage, offers comfort in use. Features: Wide field 10x/22 mm eyepieces, anti-fungus coated, with high light illumination and superior optical parts make the image clear, sharp and bright. Inverted nosepiece, with high quality infinity objectives, to combine ergonomic comfort and high quality viewing. Large stage with low positioned coaxial controlled mechanical stage and two microslide specimen holders provides more convenience for the observer. This fine tuned mechanical stage allows accurate XY-movement of the slide. Ergonomic positioned coaxial fine and coarse focusing mechanism for precise and accurate focusing. The halogen light bulb is placed on the side of the stand in a slide, which allows easy access. Changing the light bulb literally takes only a few seconds.specifications Eyepieces: WF 10x/22 mm, high eyepoint Tube: Binocular, 30 inclined, Siedentopf, IPD mm Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) spring loaded and 100x (1,25) oil, spring loaded Focusing mechanism: Bilateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: Rectangular 180 x 140 mm, high precision XY-movement by ergonomic positioned coaxial knobs, travel range 50 x 80 mm, two slide holders Condenser: Abbe condenser, 1.25 n.a., with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 6V/20W halogen with tension control, Köhler illumination with field diaphragm, easy exchange bulb slide Microscope BMS C2-220 binocular 750, Microscope BMS A6-223 The BMS A6 series is specially designed to meet all demands for high standard laboratory work, (hospital) research and universities. Eyepieces: WF 10x/22 mm, high eyepoint Tube: Trinocular, 30 inclined, Siedentopf, IPD mm Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) with slide protection and 100x (1,25) oil, with slide protection Focusing: Bi-lateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: rectangular 185 x 142 mm, high precision XY-movement by ergonomic positioned coaxial knobs Condenser: Abbe condenser 0.9/1.25 NA with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 12V - 50W halogen with tension control, Köhler illumination with field diaphragm Microscope BMS A , All prices in Euro excluding transport and VAT. 117

70 BMS C2-series Laboratory CHAPTER 9 CHAPTER 9 Laboratory BMS C2-series Microscope BMS C2-220 binocular, Ergo head Efficient, flexible, stabile and comfort in use are just a few descriptions highly applicable to the BMS C2 series. The BMS C2 series are specially designed for versatile purposes. Whether it is used for routine or laboratory purposes, or used in hospitals, research institutes, universities or colleges, it will meet all demands. Because of higher capability with lower price and humanized configuration design, it also becomes the first choice of individual, Schools, and Scientific research organization. The ergonomic design, low positioned controls for focusing and the mechanical stage, offers comfort in use. Features: Wide field 10x/22 mm eyepieces, anti-fungus coated, with high light illumination and superior optical parts make the image clear, sharp and bright. Inverted nosepiece, with high quality infinity objectives, to combine ergonomic comfort and high quality viewing. Large stage with low positioned coaxial controlled mechanical stage and two microslide specimen holders provides more convenience for the observer. This fine tuned mechanical stage allows accurate XY-movement of the slide. Ergonomic positioned coaxial fine and coarse focusing mechanism for precise and accurate focusing. The halogen light bulb is placed on the side of the stand in a slide, which allows easy access. Changing the light bulb literally takes only a few seconds.specifications Eyepieces: WF 10x/22 mm, high eyepoint Tube: Binocular, 20 to 45 inclined, Siedentopf, IPD mm Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) spring loaded and 100x (1,25) oil, spring loaded Focusing mechanism: Bilateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: Rectangular 180 x 140 mm, high precision XY-movement by ergonomic positioned coaxial knobs, travel range 50 x 80 mm, two slide holders Condenser: Abbe condenser, 1.25 n.a., with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 6V/20W halogen with tension control, Köhler illumination with field diaphragm, easy exchange bulb slide Microscope BMS C2-223 Efficient, flexible, stabile and comfort in use are just a few descriptions highly applicable to the BMS C2 series. The BMS C2 series are specially designed for versatile purposes. Whether it is used for routine or laboratory purposes, or used in hospitals, research institutes, universities or colleges, it will meet all demands. The ergonomic design, low positioned controls for focusing and the mechanical stage, offers comfort in use. Features: Wide field 10x/22 mm eyepieces, with superior quality optics, anti-fungus coated, for a clear, sharp and bright image. Inverted nosepiece, with high quality infinity objectives, to combine ergonomic comfort and high quality viewing. Large stage with low positioned coaxial controlled mechanical stage. This fine tuned mechanical stage allows accurate XY-movement of the slide. Ergonomic positioned coaxial fine and coarse focusing mechanism for precise and accurate focusing. The halogen light bulb is placed on the side of the stand in a slide, which allows easy access. Changing the light bulb literally takes only a few seconds.specifications: Eyepieces: WF 10x/22 mm, high eyepoint Tube: Trinocular, 30 inclined, Siedentopf, IPD mm Nosepiece: Quintuple Objectives: Infinity, DIN Plan achromatic. 4x (0,1), 10x (0,25), 40x (0,65) with slide protection and 100x (1,25) oil, with slide protection Focusing: Bilateral, low positioned, fine and coarse focusing control with adjustable slide protection Stage: Rectangular 180 x 140 mm, high precision XY-movement by ergonomic positioned coaxial knobs, travel range 50 x 80 mm Condenser: Abbe condenser, 1.25 n.a., with aspheric lens in centrable holder, height adjustable by rack and pinion Illumination: 6V/20W halogen with tension control, Köhler illumination with field diaphragm, easy exchange bulb slide Microscope BMS C2-223 trinocular 845, Microscope BMS C2-220 binocular, Ergo head 899, All prices in Euro excluding transport and VAT. 119

71 Inverted microscope Laboratory CHAPTER 9 CHAPTER 9 Laboratory Inspection Inverted microscope Inspection BMS Inverted Metallographic Microscope Inspection Monozoom with axial illumination Eyepieces: EWF10x/22mm Head: trinocular with adjustment of the interpupillary distance and dioptric compensation Nosepiece: quadruple Objectives: Plan DIN achromatic 10x/0.25/WD18,1, 20x/0.40/WD8,36, 50x/0.7/ WD1,39 en 80x/0,8/WD1,68 Focusing: coaxial course and fine focussing knobs on both sides. Stage: built-in moveable specimen holder of 180x155mm, x and y movement with coaxial knobs. The X axis is 75mm and the Y axis is 50mm. flasks and matrasses can be fitted to the table Condenser: in centrable holder, adjustable in height through rack and pinion, with iris diaphragm, for long working distance Illumination: built in, adjustable halogen illumination 6V-20W. Fitted with a field diaphragm and filter holder with blue, green, yellow, grey filter Photo/video applications: vertical tube for photo and video recording, which allows reflex cameras and CCD TV cameras to be used with special adapters Monocular zoom tube suited for use in combination with a 1/2 inch camera. Objective: zoom objective 1x to 7x, stepless Working distance: 100mm Optic magnification: 1x to 7x Illuminination: axial type by LED (12V) Power: by socket transformer 230V-12V Stage: 320x260x16 mm Pole: 280mm, diam. 32mm Hight adjustment: with opening of 50mm to mount monozoom With C-mount for 1/2 inch camerano eyepiece included BMS Inspection Monozoom with axial illumination 549,00 BMS CellPad BMS Inverted Metallographic Microscope 1750,00 BMS Inverted Universal Microscope Eyepieces: two WF10x/22mm with eyecaps and optional WF16x/16mm Tube: trinocular, 30 inclined IPD 52-75mm, Siedentopf, 360 rotatable, ergonomic tiltable 0-25 Nosepiece: quadruple Objectives: LW series infinity corrected, true colour, long working distance DIN phase Plan achromats 4x/NA 0.10, 10x/NA 0.25, 20x/NA0.45, optional 40x/0.65 spring loaded Stage: rectangular 160x240mm, Petri dish holder 35mm Focussing: coaxial course and fine focussing knobs on both sides with tension adjustment. Course focussing knobs are provided with a slip clutch Condenser: N.A. 0,30, adjustable in height Illumination: built in, adjustable halogen illumination 6V-30W with intensity control Not Included: mechanical Stage, micromanipulators, fluorescence attachment, adapters for video, digital still camera, 35mm SLR camera BMS Inverted Universal Microscope 2600,00 Photo adapter BMS inverse microscope with 2.5x compensation optics Photo adapter BMS inverse microscope 139,00 Thanks to 1024x768 high resolution screen, CellPad has great color fidelity and offers smooth images. With up to 5-point multi-touch screen, the CellPad E control is just at your fingertips. CellPad E uses the same quality LCD screen as Apple ipad. Latest LCD technique significantly improve the screen brightness, coupled with IPS technology to reduce the light reflection, you can get a same sharp and clear screen from any angle.you don t need to install driver or application, nor system compatible issue be concerned, but just starting camera, the live image presents in front of you immediately. You don t even have to worry about any parameter adjustment. CellPad takes care of all the parameters like white balance, exposure time etc smartly. Simplely onetouch on the screen to document your pictures to system memory or to your external storage devices like mini SD Card or USB devices. Integrated with 2MP camera, CellPad allows high speed image acquisition. You also can do the target searching, focusing through the screen easily instead of the microscope eyepieces. Furthermore, CellPad utilize the special designed image processing chip for the built-in cameras. CellPad focus on image dynamic range improvement and image detail quality. It provides solid guarantee for microscopy imaging applications. BMS CellPad Characters : Display: 8 inch High-resolution(1024x768) Color LCD Touch Screen Built-in Camera: 2.0 Megapixel Color Camera, 1024x768 Built-in Software: Capture/Measurement App Mechanical Structure: LCD Screen horizontal rotatable, LCD Screen vertical rotatable Operating System: Android CPU: Dual-core 1.5GHz Memory: 1G (DDR3) Storage: Internal 5GB or External Mini SD Card HDMI Display: Yes Output Ports: 1x HDMI Port, 1x USB 2.0 Port, 1x Mini USB 2.0 Port Power Supply: Input AC 110V-220V Output DC 5V BMS CellPad 780, Stereo microscope BMS ST-50 Eyepieces: two WF10x/20 mm, locked Tubes: 45 inclined, one tube with adjustable diopter Interpupillary distance: 50 mm to 76 mm adjustable Objective: long working distance, objective pair 1x in slide holder, not exchangeable Head: adjustable in height Focussing: coarse focussing knobs with slip clutch Illumination: incident illumination, with regulation, LED and one LED s on flexible arm Magnification: 10x Working distance: 220mm Power connection: 230 V Detachable power cordincluding: dust cover, tension wrench and eye caps Stereo microscope BMS ST , All prices in Euro excluding transport and VAT. 121

72 Spectrophotometer Laboratory CHAPTER 9 Spectrophotometer BMS SPEC 6000U Spectrophotometer Wavelength range nm, autoscan Slit width 2 nm Wavelength accuracy +/-0.5 nm +/-1.0 nm Wavelength setting repeatability 0.2 nm Wavelength display In steps of 0.1 nm Wavelength calibration Automatic at start Measurement range %T A C ( F) Photometric accuracy +/ Abs (0 to 0.5Abs), +/ Abs (0.5 to 1.0 Abs), +/-0.5 %T Photometric repeatability ±0.001 Abs (0 to 0.5Abs), ±0.002 Abs (0.5 to 1.0 Abs), +/-0.2 %T Stray light 0.15 %T (at 220,340,420 nm) 0.2 %T (at 220,340,420 nm) Baseline flatness +/ Abs Baseline stability Abs / 30min (at 500 nm, when measured at 2 hours after energization) 100%T Line noise +/-0.3 %T(at 500 nm, when measured at 2 hours after energization) Light source Ultraviolet region :Deuterium discharge tube Visible region: 20W Tungsten lamp (long lifetime, socket type) Light source changeover point Automatic changeover linked with wavelength. Changeover point can be set with UV-Solve application software Automatic changeover linked with wavelength Changeover point is set at 340 nm. Display 20 X 2 LCD Data output Digital, RS232 serial, centronics parallel Application software Windows - based UV-Solve application software / Mini - impact printer / / Power consumption (220V +/- 10% 50Hz 150VA) or (110 V +/- 10% 60Hz 150VA), switchable Standard sample holder 4-position sample holder Actual dimensions Spectrophotometer mainframe 456 W X 375 D X 220 H mm (18.0 W x 14.8 D x 8.7 H in) Net weight 18.5 Kg (41 lbs.) Shipping dimensions Paperboard container 625 W X 520 D X 348 H mm (24.6 W x 20.5 D x 13.7 H in) Shipping weight 24.5 Kg (54 lbs.) BMS SPEC 6000U Spectrophotometer 4750,

73