Wi-Fi Baby Camera Day & Night HD Cloud Camera

Transcription

1 Wi-Fi Baby Camera Day & Night HD Cloud Camera Quick Install Guide DCS-825L

2 Before you Begin Please save this guide for future reference. Read these instructions before using your product. Do not cover the ventilation holes. Do not cover this product with a blanket. Do not allow children to play with this product. Do not allow this product to get wet. Only use a dry cloth to clean it. Cleaning: You only need to clean the desktop base when the sticky pad is no longer sticky. When the pad is dirty, it easily detaches from the camera. The pad may be cleaned with water and air-dried. (Don t use a cloth to dry it.) Make sure the base is completely dry before attaching it to the camera again. Do not place this product near water or other liquids, such as near a sink, shower, or bathtub. Do not attempt to open or disassemble this product. Strangulation Hazard: Keep this product and any attached cords at least 3 feet out of reach of a child. Keep any attached cords out of your baby s crib/ cot. This product is not a replacement for responsible adult supervision. D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2013 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. 2

3 Package Contents DCS-825L Wi-Fi Baby Camera Wall Mount Kit Power Adapter Desktop Base Pink Accent Rings Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements Smartphone or tablet with iphone / ipad: ios or higher; Android 4.01 or higher g/n Wi-Fi network (Wireless N network recommended for optimal performance) Internet access required for remote viewing 3

4 Hardware Overview Front View Temperature Sensor Temperature Indicator Lullaby/Volume/ Power Buttons Night Vision Lights (IR) Focus Ring Camera Lens Light Sensor Microphone Front Accent Ring Camera Base Base Accent Ring Back View Bottom View Speaker Reset Button Micro-USB Power Port Power LED microsd Card Slot Cloud LED Mounting Point 4

5 Installation Warning: To prevent your baby from being strangled, please keep all cables such as the power cable out of your baby s reach. Cables must be at least 3 feet from the crib according to the Consumer Product Safety Commission (CPSC). 1 Plug in your camera and wait until the Power LED turns green. You can use the included power adapter, or you can use a portable USB battery (not included) that can supply 5 V / 2 A of power. 2 Download the free mydlink Baby Camera Monitor app on your smartphone or tablet. 5

6 3 Connect to the Camera s Wi-Fi signal. The Wi-Fi network name and password are located on the label on the back of this booklet. iphone/ipad: Settings > Wi-Fi Settings Android: Settings > Wireless & Networks > Wi-Fi Settings 4 Launch the mydlink Baby app. The app will guide you through the configuration process. 6

7 Mount the Camera Please refer to the steps below to assist you with mounting the camera. We suggest that you configure the camera before mounting. Warning: Placing your camera around water may cause accidental shocks. Place the wall mount where you want to position the camera and use a pencil to mark the holes. Use a 6mm drill bit to drill both holes at least 30mm deep. Use a mallet to insert the wall anchors into the holes. Place the mounting base over the holes that are in the wall. Make sure to align the mounting base holes with the holes in the wall and then use the supplied screws to attach the mounting base to the surface of the wall. Place the base cover over the mounting base and screw the camera stem into the mounting base. Do not overtighten the screws as this may crack the bracket. 7

8 Remove the base from the camera by simply pulling it off. Loosen the collar on the camera stem and then screw the camera stem into the bottom of the camera. Turn the securing wheel to ensure the connection to the camera is snug. Adjust the angle of the camera as desired and then tighten the collar on the camera stem to lock it in place. 8

9 FAQs 1. The Image is out of focus. You can turn the white focus ring on the front of the camera to adjust the focus. 2. How do I change the accent rings? Rotate the access ring counterclockwise, then lift it off. Put the new ring on and rotate it clockwise until it clicks into place. 3. How do I select a different lullaby? Use the mydlink Baby app to change the lullaby. Click on the music icon on the camera s live view screen. Select a lullaby from the list or select to play all. 4. I started the mydlink Baby Camera Monitor app, but I can t find my camera. Make sure your camera is turned on and receiving power. If you are setting up a new camera, make sure your smartphone or tablet is connected to the camera s Wi-Fi signal (not your wireless router). The Wi-Fi network name should be [mybabycam-xxxx], where XXXX is a 4-digit code (the last 4 digits of your camera s MAC address). The Wi-Fi network name and password is printed on a label on the bottom of your camera and on the back of this install guide. If you still can t find your camera, reset your camera by pressing its reset button for 10 seconds (while it is powered on). 5. Why is there a white haze when viewing in night vision mode? The night vision lights on the camera may be reflecting off a nearby surface. Try repositioning and aiming the camera. 9

10 Notes 10

11 Notes 11

12 Notes 12

13 Notes 13

14 Notes 14

15 Notes 15

16 Technical Support This guide is only for the first time configuration. Please refer to the user manual to learn more or visit for more information. Also feel free to contact us through our website. USA Camera Wi-Fi Network Details: Your Camera Password: Version 1.00(US) September 18, DCS825LQN01G Copyright 2013 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard g and n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit dlink.com (US) or dlink.ca (Canada) for more details.