D Subminiature Combo D
|
|
- Dustin Randall
- 6 years ago
- Views:
Transcription
1 Subminiature ombo 40 High Power Straight Standard P Tails (Sizes -) Plug or contact cavity arrangements, see page 222. or P.. hole patterns, see pages or panel cutouts, see page 221. s with Standoff #4-40 UN ith Screw ocks ayout ithout oardlocks ith oardlocks ith oardlocks 51 MV5H1PNK87 MZ5H1PNK87 MN5H1PNK87 72 MV7H2PNK87 MZ7H2PNK87 MN7H2PNK MV11H1PNK87 MZ11H1PNK87 MN11H1PNK87 33 MV3H3PNK87 MZ3H3PNK87 MN3H3PNK87 3K3 MV3HK3PNK87TM MZ3HK3PNK87TM MN3HK3PNK87TM 55 MV5H5PNK87 MZ5H5PNK87 MN5H5PNK87 94 MV9H4PNK87 MZ9H4PNK87 MN9H4PNK MV13H3PNK87 MZ13H3PNK87 MN13H3PNK MV17H2PNK87 MZ17H2PNK87 MN17H2PNK MV21H1PNK87 MZ21H1PNK87 MN21H1PNK87 88 MV8H8PNK87 MZ8H8PNK87 MN8H8PNK MV13H6PNK87 MZ13H6PNK87 MN13H6PNK MV17H5PNK87 MZ17H5PNK87 MN17H5PNK MV21H4PNK87 MZ21H4PNK87 MN21H4PNK MV25H3PNK87 MZ25H3PNK87 MN25H3PNK MV27H2PNK87 MZ27H2PNK87 MN27H2PNK87 Note: or contacts with 30 microinches gold substitute K127 for K87. xample: MV5H1PNK127 or shell sizes, see page 68. Keyed. ngaging ace OROK Ø 0,76 (.030) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock and high power contact imensions ±0,368 (.0145) ±0,41 (.016) 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 66 imensions are shown in mm (inch) imensions subject to change
2 Subminiature ombo 40 High Power Straight Standard P Tails (Sizes -) Receptacle or contact cavity arrangements, see page 223. or P.. hole patterns, see pages or panel cutouts, see page 221. s with Standoff #4-40 UN ith Screw ocks ayout ithout oardlocks ith oardlocks ith oardlocks 51 MV5H1SN197 MZ5H1SN197 MN5H1SN MV7H2SN197 MZ7H2SN197 MN7H2SN MV11H1SN197 MZ11H1SN197 MN11H1SN MV3H3SN197 MZ3H3SN197 MN3H3SN197 3K3 MV3HK3SN197TM MZ3HK3SN197TM MN3HK3SN197TM 55 MV5H5SN197 MZ5H5SN197 MN5H5SN MV9H4SN197 MZ9H4SN197 MN9H4SN MV13H3SN197 MZ13H3SN197 MN13H3SN MV17H2SN197 MZ17H2SN197 MN17H2SN MV21H1SN197 MZ21H1SN197 MN21H1SN MV8H8SN197 MZ8H8SN197 MN8H8SN MV13H6SN197 MZ13H6SN197 MN13H6SN MV17H5SN197 MZ17H5SN197 MN17H5SN MV21H4SN197 MZ21H4SN197 MN21H4SN MV25H3SN197 MZ25H3SN197 MN25H3SN MV27H2SN197 MZ27H2SN197 MN27H2SN197 Note: or contacts with 30 microinches gold substitute K126 for 197. xample: MV5H1SNK126 or shell sizes, see page 69. Keyed. ngaging ace OROK Ø 0,76 (.030) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock and high power contact imensions 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) imensions are shown in mm (inch) imensions subject to change 67
3 Subminiature ombo 40 High Power Straight Standard P Tails (Size ) Plug s with Standoff #4-40 UN ith Screw ocks ayout ithout oardlocks ith oardlocks ith oardlocks 247 MV24H7PNK87 MZ24H7PNK87 MN24H7PNK MV36H4PNK87 MZ36H4PNK87 MN36H4PNK MV43H2PNK87 MZ43H2PNK87 MN43H2PNK MV47H1PNK87 MZ47H1PNK87 MN47H1PNK87 Note: or contacts with 30 microinches gold substitute K127 for K87. xample: MV24H7PNK127 or contact cavity arrangements, see page 222. or P.. hole patterns, see page 256. or panel cutouts, see page 221. ngaging ace OROK Ø 0,76 (.030) 5,69 (.224) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock, and high power contact imensions ±0,41 (.016) 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 68 imensions are shown in mm (inch) imensions subject to change
4 Subminiature ombo 40 High Power Straight Standard P Tails (Size ) Receptacle s with Standoff #4-40 UN ith Screw ocks ayout ithout oardlocks ith oardlocks ith oardlocks 247 MV24H7SN197 MZ24H7SN197 MN24H7SN MV36H4SN197 MZ36H4SN197 MN36H4SN MV43H2SN197 MZ43H2SN197 MN43H2SN MV47H1SN197 MZ47H1SN197 MN47H1SN197 Note: or contacts with 30 microinches gold substitute K126 for 197. xample: MV24H7SNK126 or contact cavity arrangements, see page 223. or P.. hole patterns, see page 259. or panel cutouts, see page 221. ngaging ace OROK Ø 0,76 (.030) 5,69 (.224) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock and high power contact imensions 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) imensions are shown in mm (inch) imensions subject to change 69
5 Subminiature ombo 40 High Power Straight uropean P Tails (Sizes -) Plug or contact cavity arrangements, see page 222. or P.. hole patterns, see pages or panel cutouts, see page 221. s with Standoff #4-40 UN ithout oardlocks ith oardlocks ith Screw ocks ith oardlocks ayout 51 MV5H1PYK87 MZ5H1PYK87 MN5H1PYK87 72 MV7H2PYK87 MZ7H2PYK87 MN7H2PYK MV11H1PYK87 MZ11H1PYK87 MN11H1PYK87 33 MV3H3PYK87 MZ3H3PYK87 MN3H3PYK87 3K3 MV3HK3PYK87TM MZ3HK3PYK87TM MN3HK3PYK87TM 55 MV5H5PYK87 MZ5H5PYK87 MN5H5PYK87 94 MV9H4PYK87 MZ9H4PYK87 MN9H4PYK MV13H3PYK87 MZ13H3PYK87 MN13H3PYK MV17H2PYK87 MZ17H2PYK87 MN17H2PYK MV21H1PYK87 MZ21H1PYK87 MN21H1PYK87 88 MV8H8PYK87 MZ8H8PYK87 MN8H8PYK MV13H6PYK87 MZ13H6PYK87 MN13H6PYK MV17H5PYK87 MZ17H5PYK87 MN17H5PYK MV21H4PYK87 MZ21H4PYK87 MN21H4PYK MV25H3PYK87 MZ25H3PYK87 MN25H3PYK MV27H2PYK87 MZ27H2PYK87 MN27H2PYK87 or M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: or tin plated P tails add 226 (signal contacts only). xample: MV5H1PYK87226 or performance class 2 substitute K127 for K87. xample: MV5H1PYK127 or shell sizes, see page 72. Keyed. ngaging ace OROK Ø 0,60 (.024) 7.62 ± 0,25 STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock, and high power contact imensions ±0,368 (.0145) ±0,41 (.016) 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 70 imensions are shown in mm (inch) imensions subject to change
6 Subminiature ombo 40 High Power Straight uropean P Tails (Sizes -) Receptacle or contact cavity arrangements, see page 223. or P.. hole patterns, see pages or panel cutouts, see page 221. s with Standoff #4-40 UN ithout oardlocks ith oardlocks ith Screw ocks ith oardlocks ayout 51 MV5H1SY197 MZ5H1SY197 MN5H1SY MV7H2SY197 MZ7H2SY197 MN7H2SY MV11H1SY197 MZ11H1SY197 MN11H1SY MV3H3SY197 MZ3H3SY197 MN3H3SY197 3K3 MV3HK3SY197TM MZ3HK3SY197TM MN3HK3SY197TM 55 MV5H5SY197 MZ5H5SY197 MN5H5SY MV9H4SY197 MZ9H4SY197 MN9H4SY MV13H3SY197 MZ13H3SY197 MN13H3SY MV17H2SY197 MZ17H2SY197 MN17H2SY MV21H1SY197 MZ21H1SY197 MN21H1SY MV8H8SY197 MZ8H8SY197 MN8H8SY MV13H6SY197 MZ13H6SY197 MN13H6SY MV17H5SY197 MZ17H5SY197 MN17H5SY MV21H4SY197 MZ21H4SY197 MN21H4SY MV25H3SY197 MZ25H3SY197 MN25H3SY MV27H2SY197 MZ27H2SY197 MN27H2SY197 or M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: or performance class 2 substitute K126 for 197. xample: MV5H1SYK126 or shell sizes, see page 73. Keyed. ngaging ace OROK Ø 0,60 (.024) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock, and high power contact imensions 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) imensions are shown in mm (inch) imensions subject to change 71
7 Subminiature ombo 40 High Power Straight uropean P Tails (Size ) Plug s with Standoff #4-40 UN ithout oardlocks ith oardlocks ith Screw ocks ith oardlocks ayout 247 MV24H7PYK87 MZ24H7PYK87 MN24H7PYK MV36H4PYK87 MZ36H4PYK87 MN36H4PYK MV43H2PYK87 MZ43H2PYK87 MN43H2PYK MV47H1PYK87 MZ47H1PYK87 MN47H1PYK87 or M3 threads replace MV with MT, MZ with MQ, MN with MU. Notes: or tin plated P tails add 226 (signal contacts only). xample MV24H7PYK87226 or performance class 2 substitute K127 for K87. xample: MV24H7PYK127 or contact cavity arrangements, see page 222. or P.. hole patterns, see page 256. or panel cutouts, see page 221. ngaging ace OROK Ø 0,60 (.024) 5,69 (.224) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock, and high power contact imensions ±0,41 (.016) 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 72 imensions are shown in mm (inch) imensions subject to change
8 Subminiature ombo 40 High Power Straight uropean P Tails (Size ) Receptacle s with Standoff #4-40 UN ithout oardlocks ith oardlocks ith Screw ocks ith oardlocks ayout 247 MV24H7SY197 MZ24H7SY197 MN24H7SY MV36H4SY197 MZ36H4SY197 MN36H4SY MV43H2SY197 MZ43H2SY197 MN43H2SY MV47H1SY197 MZ47H1SY197 MN47H1SY197 or M3 threads replace MV with MT, MZ with MQ, MN with MU. Note: or performance class 2 substitute K126 for 197. xample: MV24H7SYK126 or contact cavity arrangements, see page 223. or P.. hole patterns, see page 259. or panel cutouts, see page 221. ngaging ace OROK Ø 0,60 (.024) 5,69 (.224) STNO #4-40 UN SR OK #4-40 UN Screw lock, boardlock, and high power contact imensions 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) imensions are shown in mm (inch) imensions subject to change 73
FCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationFiltered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
More informationMicro Twinax Quick Disconnect NDL Size Package
Micro Twinax Quick Disconnect NDL Size Package Micro Twinax Quick Disconnect NDL Plug 100 and 150 Ohm WAY 014034-2049 100 Differential Twinax 540-1153-000 014034-2050 100 Flexible Twinax 540-1161-000 Ø.250
More informationEMI Filtered Connectors
MI ed onnectors RTIFI 128 ed onnector Product Positioning Guide Series F Ferrite ing of high frequency interference Short, space saving.318" footprint Replaces individual ferrite leads, saving cost and
More informationRight Angle PCB Receptacle
Series 80 Series 80 Mighty Mouse ouble-start ACME Thread 80-0 Ordering Information connectors offer military grade performance in a small, lightweight package. These connectors are rated for MIL-ST-80
More informationSeries 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
P Series 79 Micro-rimp Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight P Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits.
More informationKH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
More informationFCC17 Series FILTERED D-SUB CONNECTORS
Specifications FCC17 Series Filter Characteristics: See Page 2 Electrical Data: See Page 2 Material and Finishes: See Page 3 Environmental Data: See Page 3 UL File # : E135615 CSA File # : LR68598 These
More informationRight angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
More informationTE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
More informationM Series Pin and Socket Connectors. RoHS. Ready
M Series RoHS Ready M Series Connectors Product Facts Most connectors intermateable with connectors made to MIL-C-28748 requirements Wide range of connector styles and sizes: standard connectors (unloaded),
More informationPCB Single Row Connectors
PB Single Row onnectors Right ngle Mount Thru Hole PB onnectors with Mounting Ears - How to Order Right ngle Thru Hole PB Nano onnectors with Mounting Ears feature gold alloy TwistPin contacts. These nanomimiature
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationOct 16 Rev D
Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationAmphenol. The Company. What is a Filtered Connector? Benefits. Choosing the Right Capacitance for Your Filter Connector
Amphenol The Company Amphenol Canada Corp. a subsidiary of Amphenol Corporation, is an international leader in the manufacture of Filtered Connectors and Specialty Interconnect Devices, and has been pioneering
More informationIntroduction. Quadrax Contacts, Connectors and Cables. Product Facts
Introduction Product Facts n 2 mm centerlines n Designed per ARINC 600 Supplement 18 n Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular (GPR), MIL-DTL-38999
More informationAC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS
AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS The AC series, A type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs in mind.
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationY.COM.TW WWW. 0Y.COM.TW WW. Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L
The D-sub Connector Series Enters a New Era with Lead-free Products. Determine anchor screw diameters at a glance. Greatly simplified anchor combinations..t.100y. Shielded against EMI..T EMI/RFI shielded
More informationContact arrangements materials and finishes dimensions PCB layout panel cutout
Contact arrangements materials and finishes dimensions PCB layout panel cutout SuperFly to AlphaLink flex jumper Superfly to AlphaLink Flex Jumpers Glenair Series 88 SuperFly Cordsets represent a perfect
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationHex and O Crimp [.572] Dia. Max. Interchangeable Dies for Interchangeable Termination
BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationTXC ULTRA-MINIATURE COAXIAL CONNECTORS. Ultra-Miniature Coaxial Connectors. Features. Materials/Finish. Specifications
ULTRA-MINIATURE COAXIAL CONNECTORS TXC Ultra-Miniature Coaxial Connectors Features 1: Ultraminiaturization provided by using hermetic beads. 2: The low profile and narrow flange leads to high density mounting.
More informationMUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5
Universal Serial Bus MUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5 MAXCONN, INC. - 2151 DEL FRANCO STREETo SAN JOSE, CALIFORNIA 95131-408-435-5050,,
More information2M801 Dual-Start ACME Threads
2M801 Dual-Start ACME Threads Ordering Guide for 2M801 Series Style Service Class - Contact Type Alternate Insert Arrg. Position 2M801-0XX -16 NF 6-7 P A SERIES 2M801-007 Plugs with Integral Backshell
More informationHigh Density Connectors Multipin and MS Multipin MS High Current and High Voltage
Multipin is the description for electrical feedthroughs which have two or more conductor paths, and include connectors for one or both sides. This series is typically used for transmission of low power
More informationhigh speed RACk & PANeL connectors arinc 600 ARINC 600 Shell Size Plug ARINC 600 Shell Size Receptacle ARINC 600 Shell Size Plug ARINC 600 Shell Size Receptacle ARINC 600 Shell Size Plug ARINC 600 Shell
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationSeries 2M801 Connector
1 Series 2M801 Connector PDS-223 Ordering Guide for 2M801 Plug and Receptacle 1. 2. 3. 4. 5. 6. Series Style Service Class - Insert Arrg. Contact Type Alternate Position 2M801-00X -16 M 7-10 P A KEYING
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationYOUR CONNECTION TO QUALITY AND SERVICE
YOUR CONNECTION TO QUALITY AND SERVICE EDAC - A WORLD-CLASS CONNECTOR COMPANY Since its formation over 30-years ago, EDAC Inc. has grown to become one of the world s leading manufacturers of card-edge,
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationAmphenol Amphenol East Asia Ltd., Taiwan Branch
application to SERVER Amphenol Amphenol East Asia Ltd., Branch 5F, No.361, Fusing 1st Rd., Gueishan Township, Taoyuan County 333, (R.O.C.) TEL:+886-3-264-7200 FAX:+886-3-327-5296 Contents: Part Number
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationYOUR CONNECTION TO QUALITY AND SERVICE
YOUR CONNECTION TO QUALITY AND SERVICE EDAC - A WORLD-CLASS CONNECTOR COMPANY Since its formation over 30-years ago, EDAC Inc. has grown to become one of the world s leading manufacturers of card-edge,
More informationUSB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationJK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
More informationDSubminiature Space Connectors General
Subminiature Space onnectors General High performance Subminiature connectors, S or MIL qualified, for space applications. Space/High reliability *M and *M connectors meet stringent tests for outgassing
More informationNEW ITEM THERMOPLASTIC A - TYPE FLANGE 3 CONTACT
NEW ITEM AC SERIES CHASSIS CONNECTORS THERMOPLASTIC A - TYPE FLANGE 3 CONTACT Features: Thermoplastic Shell Industry standard PC footprints. Vertical or Horizontal PC mounting. Precision machined pin contacts.
More informationSection D Low Profile Single Row Metal Shell Microminiature
Section Low Profile Micro- product selection guide Connector height is a priority for miniaturized electronics modules. These GMSM connectors are shorter and occupy less board real estate than comparable
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationNext Generation ARINC 600 Connector
Next Generation ARINC 600 Connector Application Specification 114-13272 29 NOV 12 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
More informationSeries 804 Push-Pull Mighty Mouse Receptacle Connector
Series 0 Series 0 Push-Pull Mighty Mouse 0-00 and 0-00 Ordering Information In-Line Rear Panel Mount Jam Nut Front Panel Mount Jam Nut for direct attachment of a cable shield. Install a boot, or overmold
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationMicro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
More informationD38999/21 / H2
MIL-DTL-38999 Series I, II, III and IV QPL s Part number Description Page MIL-DTL-38999 Series I, II, III and IV Hermetic Class Insert Arrangements B-2 MIL-DTL-38999 Series I, II, III and IV Hermetic Class
More informationNOV REV A2
Application Specification 114-94447 NOV. 2017 REV A2 Class 1 RJ45 Jack with Integrated Magnetics 1. INTRODUCTION This specification covers the requirements for application of RJ45 Jack with integrated
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
More informationModel User Manual Revision E 04/29/99. OEM Gaging System. Part Number R01
04/29/99 Model 3800 OEM Gaging System User Manual Revision E Part Number 028585-R01 Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
More informationJL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationHigh Current Products Catalog Revised 4-01
Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from 196 C to
More informationHigh Current Products Catalog Revised onlinecomponents.com
Interfaces Product Facts Pins and sockets have low insertion force High current ratings with very low resistance All plated products are gold or silver plated Louvertac bands have a temperature range from
More informationtriaxial CONtaCts Overview Features
triaxal CONtaCts triaxial CONtaCts Overview Smiths Connectors concentric twinax/triax contacts provide flexibility in the design of high speed data systems. The contacts, including the unique sizes 10
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationPCB Hardware. Contents. SMT Test Points SMT Cable Clips SMT Jumper Links PCB Jumper Links PCB Terminals, Turret Lugs Spacers / Pillars / Standoffs
PC Hardware Contents SMT Test Points SMT Cable Clips SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with standard probes,
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationHD10 Series. Contents. HD10 Series Overview PG 74. Part Numbering System PG 74. Dimensions PG 74. Connector Styles PG 75
ontents H10 Series Overview PG 74 Part Numbering System PG 74 imensions PG 74 onnector Styles PG 75 onnector onfigurations PG 75 Special Modifications PG 75 ccessories PG 76-78 73 H10 Series Overview The
More informationModular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/67B 29 June 2009 SUPERSEDING MIL-C-83723/67A (USAF) 17 December 1991 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, THREADED COUPLING,
More informationTHIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO
050-392 DATA SHEET 38999 SERIES III TYPE, ARR. 25-26 WITH SIZE 8 ELECTRO-OPTICAL CONTACT TRANSMITTER AND/OR RECEIVERS PC TAIL WITH PCB STANDOFFS OPEN FACE ENVIRONMENTALLY SEALED REV DESCRIPTION DATE APPROVED
More informationRinglock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/68B 29 June 2009 SUPERSEDING MIL-C-83723/68A (USAF) 17 December 1991 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, THREADED COUPLING,
More informationThe Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
More informationonlinecomponents.com Quadrax Contacts, Connectors and Cables
Quadrax Contacts, Connectors and Cables Introduction Product Facts n 2 mm centerlines n Designed per ARINC 600 Supplement 18 n Fits into keyed connector inserts for connectors such as: ARINC 404 & 600,
More informationUTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
More informationTechnical Characteristics ENVIRONMENTAL
S Series Railway lat loating onnectors Railway flat floating connector odularity mixed power, signal & coaxial contacts. Up to 70 signal contacts. uiding pins. Rack/Panel applications (norm XP6-00) One
More informationQuadrax Contacts, Connectors and Cables
Quadrax Contacts, Connectors and Cables Introduction 2 mm centerlines Designed per ARINC 600 - Supplement 14 Fits into keyed connector inserts for connectors such as: ARINC 404 & 600, General Purpose Rectangular
More informationFASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
More informationRTX series EN
RTX series EN3716 10 CONTENTS RTX series Page RTX series Introduction... 10-4 Applications... 10-4 Product overview... 10-5 Technical characteristics... 10-6 & 10-7 How to order connectors... 10-8 Dimensions
More informationMake sure that the MUTE button on your phone is depressed during the voice explanations.
If you are having trouble logging in, please call Carrie Tanke at (805) 522-7958 ext 432. Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 Input / Output Rectangular
More information8525 Series. Hermetic connectors. Backshells aluminum version. Backshells stainless steel version. basic series I H 18 B 32 P N H
Linkto8526eries 8525 eries Hermetic connectors basic series 8525 I H 32 N H type obligatory suffix I solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle hermetic version H stainless
More informationTerminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
More informationPreset counters, electromechanical
The electromechanical preset counters (with manual reset) boast a robust construction. They are ideal for use in harsh industrial environments as stand-alone counters or as plugin variants in combination
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More information0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
More informationPCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
1. Turn off and unplug the game. COPYRIGHT 2007 MERIT ENTERTAINMENT 2. Unlock and open the CPU section. Ion evo/evo Wallette/Elite Edge ECS Motherboard Removal 3. Remove the 3 screws securing the I/O board
More informationVARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
More informationUltima X5000 Rectangular Duct Mount Kit User Instructions
Ultima X5000 Rectangular Duct Mount Kit User Instructions MSA Kit 10176947 - Ultima X5000 316 Stainless Steel Parts List / Instructions Rectangular Gasket (1) Rectangular Duct Mount Base Plate (1) Base
More informationFeatures / Options. - MP-62 Series
MULTIPIN CONNECTORS Amphenol has an extensive range of circular and rectangular multipin connectors ideally suited to the entertainment industry. Featuring rugged housings and precision made contacts these
More informationonlinecomponents.com
IP68 Over moulded assembly provides IP68 cable seal IP68 rated USB version 2.0 performance Plug and play capability Visual mating indication Shielded system Single and double ended cables Screw coupling
More informationNI USB-6211/6218 OEM
USER GUIDE NI USB-6211/6218 OEM This document provides information about the dimensions, mounting options, connectors, and other components of the NI USB-6211/6218 OEM devices. Caution There are no product
More information0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More information