Neo-Flex Ceiling Mount

Transcription

1 Neo-Flex Ceiling Mount ENGLISH User's Guide - English Guía del usuario - Español Manuel de l utilisateur - Français Gebruikersgids - Nederlands Benutzerhandbuch - Deutsch Guida per l utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語用户指南 : 汉语 Max screen size: 65 Max weight 125lbs 56.7 kg CAUTION: DO NOT EXCEED MAX- IMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY PROPERTY DAMAGE MAY OCCUR! Reduce.Reuse.Recycle 1 of 12

2 ENGLISH Hazard Symbols Review These symbols alert users of a safety condition that demands attention. All users should be able to recognize and understand the significance of the following Safety Hazards if encountered on the product or within the documentation. Children who are not able to recognize and respond appropriately to Safety Alerts should not use this product without adult supervision! Symbol Signal Word Level of Hazard NOTE CAUTION WARNING A NOTE indicates important information that helps you make better use of this product. A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. A WARNING indicates either potential for property damage, personal injury, or death. ELECTRICAL An Electrical indicates an impending electrical hazard which, if not avoided, may result in personal injury, fire and/or death. Safety WARNING: FAILURE TO READ, THOUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, VOIDING OF FACTY WARRANTY! For ceiling mounted products, professional installation is highly recommended. The included mounting plate and hardware has been designed for wood beams and joists 2 x4 and greater. For a safe installation, the ceiling must support 4 times the weight of the total load. The installer is responsible for verifying that the ceiling structure will safely support the total load of the product using the selected mounting hardware for the particular installation. Do not attempt to install or assemble this product if the product or hardware is damaged or missing. In the event that replacement parts or hardware are needed, please contact Customer Service Tools Needed 1/4 16mm 13mm 10mm 2 of 12

3 4 Contents Description 1 1 Ceiling Plate Contents 2 1 Celing Plate Cover Part # 3Qty 1 NPT pipe Description Contents Ceiling NPT Plate 1 Pipe Set Scew Part 2 # Qty 5 1 1Celing Single Plate Tilt Cover Description Head NPT Ceiling Tilt pipeplate Adjustment Nut NPT Celing Tilt Pipe Plate Cover 2 PinSet Scew 53 1 NPT pipe 8 1 1Single VESA Tilt Monitor Head Plate 64 2 NPT Pipe Set Scew 9 1 4Tilt M8 Adjustment Hex Screw Nut 75 1 Single Tilt Head Tilt Universal Pin Monitor Adapter 86 1 Tilt Adjustment Nut VESA M8 Monitor Nylock Nut Plate M8 Tilt Hex Pin Screw Universal VESA Monitor Monitor Plate Adapter M8 M8 Nylock Hex Screw Nut 10 1 Universal Monitor Adapter 11 4 M8 Nylock Nut Components Contents Description 1 1 Ceiling Plate Contents Celing Plate Cover NPT Description pipe 1 1 Ceiling 4 Plate 2 NPT Pipe Set Scew 2 1 Celing 5 Plate 1 Cover Single Tilt Head 3 1 NPT 6pipe 1 Tilt Adjustment Nut 4 2 NPT 7Pipe 1Set Tilt Scew Pin 5 1 Single 8 Tilt 1Head VESA Monitor Plate 6 1 Tilt Adjustment 9 4 M8 Nut Hex Screw 7 1 Tilt 10 Pin 1 Universal Monitor Adapter 8 1 VESA 11 Monitor 4 M8 Plate Nylock Nut 9 4 M8 Hex Screw 10 1 Universal Monitor Adapter 11 4 M8 Nylock Nut ENGLISH P ) 3) 13) Screws / Hardware for Flat Panel (PN: ) Description Screws / Hardware for Flat Panel (PN: ) M-A 4 Philips screws M4 x 15mm Description M-B 4 Philips screws M4 x 30mm M-A 4 Philips screws M4 x 15mm M-C 4 Philips screws M5 x 15mm Screws / Hardware M-B for 4 Flat Philips Panel screws (PN: M ) x 30mm M-D 4 Philips screws M5 x 30mm M-C 4 Philips Description screws M5 x 15mm M-E 4 Philips screws M6 x 15mm M-A 4 Philips M-D screws 4 Philips M4 x 15mm screws M5 x 30mm M-F 4 Philips screws M6 x 30mm M-B 4 Philips screws M4 x 30mm M-A M-B M-C M-E M-D 4 Philips M-E screws M-F M6 M-G x 15mm M-H M-G 4 Philips screws M8 x 15mm M-C 4 Philips M-F screws 4 Philips M5 x 15mm screws M6 x 30mm M-H 4 Philips screws M8 x 30mm M-D 4 Philips M-G screws 4 Philips M5 x 30mm screws M8 x 15mm M-I 4 Round Spacers: M6-M8 x 5mm M-E 4 Philips M-H screws 4 Philips M6 x 15mm screws M8 x 30mm M-J 4 Round Spacers: M6-M8 x 10mm M-F 4 Philips M-I screws 4 Round M6 x Spacers: 30mm M6-M8 x 5mm M-K 4 Round Washers: M4-M5 M-G 4 Philips M-J M-I screws 4 M-J Round M8 M-K x Spacers: 15mmM-L M6-M8 x 10mm M-L 4 Round Washers: M6-M8 M-H 4 Philips M-K screws 4 Round M8 x Washers: 30mm M4-M5 Specialty Hardware Kit M-I 4 Round M-L Spacers: 4 Round M6-M8 Washers: x 5mmM6-M8 Description M-J 4 P-A Round Specialty Spacers: Hardware M6-M8 Kit x 10mm P-B P-A 4 Lag Bolts M-K 4 Round Part # Washers: Qty M4-M5 Description P-B 4 M10 Steel Washers M-L 4 Round P-A Washers: 4 Lag M6-M8 Bolts Specialty Hardware Kit Specialty Hardware P-B 4Kit M10 P-CSteel Washers P-D Description Specialty Hardware Description Kit P-C 2 M6x8mm Long Hex Head Screw P-A 4 Lag Bolts P-E Description P-D 2 M6 Steel Washer P-B 4 M10 P-C Steel 2Washers M6x8mm Long Hex Head Screw P-E 1 Allen Wrench 2.5mm Specialty Hardware P-D 2Kit M6 Steel Washer P-E 1 Allen Description Wrench 2.5mm P-C 2 M6x8mm Long Hex Head Screw P-D 2 M6 Steel Washer P-E 1 Allen Wrench 2.5mm 3 of 12

4 ENGLISH 1 Monitor Plate Options A 200mm 100mm 8 200mm 660mm B 300mm mm OPTION B: Step 1 OPTION B: Step 2 1/4 8mm 9 13mm 10mm 11 4 of 12

5 M-D M-E M-F A OPTION A: Step 1 Connect adapter to flat panel ENGLISH M-K M-I M-J M-A M-L M-B M-C M-G M-H B OPTION B: Step 3 Connect adapter to flat panel M-K M-I M-J M-A M-B M-C M-D M-L M-E M-F M-G 5 of 12

6 ENGLISH 2 Find stud and mark edge and center locations 1 3 Drill pilot hole 6 of 12

7 4 5 1 Single Tilt Head 6 1 Tilt Adjustment Nut 7 1 Tilt Pin 8 1 VESA Monitor Plate 9 4 M8 Hex Screw 10 1 Universal Monitor Adapter 11 4 M8 Nylock Nut Mount ceiling plate ENGLISH 1/4 8mm 16mm ) P-B P-A 5 Assemble P-E NOTE: Security Screw Must be installed for safe and proper installation 4 3 NOTE: Sticker must be removed for safe and proper installation NOTE: Large opening must be at the top. 7 of 12

8 ENGLISH 6 Attach cover Description 1 1 Ceiling Plate 2 1 Celing Plate Cover 3 1 NPT pipe 4 2 NPT Pipe Set Scew 5 1 Single Tilt Head 6 1 Tilt Adjustment Nut 7 1 Tilt Pin 8 1 VESA Monitor Plate 9 4 M8 Hex Screw 10 1 Universal Monitor Adapter 11 4 M8 Nylock Nut 2 anel (PN: ) ription x 15mm x 30mm x 15mm x 30mm x 15mm x 30mm x 15mm 7 x 30mm 6-M8 x 5mm 6-M8 x 10mm 4-M5 6-M8 ription Assemble ription Head Screw m P-E NOTE: Security Screw Must be installed for safe and proper installation of 12

9 8 Hang with monitor attached ENGLISH NOTE: Security Screws Must be installed for safe and proper installation P-C x2 P-D x2 NOTE: Sticker must be removed for safe and proper installation NOTE: Two people are needed to hang the TV. 9 of 12

10 ENGLISH Adjustment Step 9 Adjust to Desired Location or Tilt 1/4 8mm 13mm 10 of 12

11 10 Route Cables ENGLISH 11 of 12

12 ENGLISH 12 of 12