Reaction Blocks for Circular-top Hot Plate/Stirrers

Transcription

1 P 2010 C O N TA R I C I I N S G N Reaction Blocks for Circular-top Hot Plate/Stirrers New sizes Easy to use Complete systems Radley s and ACE brand Economical and efficient sales@aceglass.com

2 ACE DynaBloc anodized aluminum blocks are ideal for heating and mixing solutions in a variety of vials and small round bottom flasks. ACE DynaBloc heating blocks use a universal base plate ( ), which fits easily on top of any circular-top hotplate stirrers such as the popular IKA Model RCT or Thermolyne RT. The ACE DynaBloc system is low-cost, and its efficient heating blocks utilize a wide range of standard laboratory glassware. They can be used for stirring and/or heating multiple samples in applications such as digestion, extraction, distillation, and synthesis. The system is easy to set up, allows switching from vials to flasks in seconds, and is also easy to disassemble for cleaning. The configuration of the vial/flask holes allows for optimum heating and mixing in every well. Use ACE DynaBloc heating blocks with your standard labware and hotplates for highly economical and efficient heating/stirring DynaBloc Base Plate Anodized aluminum base plate for use with 13698, and DynaBloc heads and fits the standard circular 135mm diameter stirrer/hotplate top. The base has a hole in the side to accommodate a standard thermocouple sensor to measure the heat at the base. I.D., mm O.D., mm DynaBloc Cylindrical, for Vials & Tubes Anodized aluminum blocks for use with Base Plate. Pre-drilled openings for standard-size glass vials and tubes including small dram vials, chromatography vials, scintillation vials, EPA vials, VOC vials, and standard test tubes. The blocks can be separated from the base plate for easy cleaning and handling. All blocks have a predrilled hole to accommodate sensor probe and have another hole to accommodate the T-handle extractor for easy removal of the block, even when hot. Order base plate, block and T-handle separately. Number of Holes For Vessel Size Hole Size, mm Order Code Each ml Vial 28 x ml Vial 28 x mL Reaction V-Vial or 25x100mm tubes 26 x Dram/16 ml Vial 22 x mL Reaction V-Vial or 12 x 75mm tubes 13 x mm O.D. tubes 17 x mL Reaction V-Vial 22 x Dram/8 ml Vial 17 x Dram/4 ml Vial 15 x Dram or 1.2 ml Chrom. Vial 13 x AccessorY T-handle Extractor (fits all ACE blocks)

3 13699 DynaBloc* Cylindrical, for Flasks Anodized aluminum blocks are machined to accommodate small round bottom flasks and small Erlenmeyer flasks. The blocks fit the universal base plate, and have one hole to accommodate the extension rods and the T-handle extractor which assists moving the blocks even while hot. The blocks also have a hole for a temperature sensor probe. Short support rod (31cm long) is for supporting flasks in the flask blocks; long (61 cm) rod supports condensers and other taller glass apparatus. Clamp devices are necessary to stabilize glassware while in blocks. Order base plate, block, clamp device, and support rod separately. # of Holes For Vessel Size Well Dia., mm Block Height Order Code Each ml Erlenmeyer Flask mm or 300 ml Round Bottom Flask mm ml Round Bottom Flask mm ml Round Bottom Flask mm DynaBloc* Segmented New heating/mixing blocks with even more versatility. These aluminum blocks have three segments within each block that have different size holes per each segment to accommodate a broad range of a flask or vials at the same time. Chose different size vials, tubes or a flask to run simultaneously. Block fits standard base plate and blocks fit all standard size 135mm diameter round top hotplate/stirrers. Order base plate, block, clamp device, and support rod separately. # of Holes For Vessel Size Dram Vials 12 1 Dram Vials 8 2 Dram Vials 12 1 Dram Vials 4 4 Dram Vials 8 2 Dram Vials mm Tubes 1 50 ml Round Bottom Flask 4 40 ml Vials *All these items use Base Plate. Block Order Height Code Each 30.8mm mm mm Accessories for 13696, and Order Code Each Flask/Condenser Clamp Device Stainless Steel Short Support Rod (31 cm) Stainless Steel Long Support Rod (61 cm) n

4 New Instatherm/Heat Blocks Complete Instatherm/Block System A combination of two great ideas, why not the best and most accurate way of heating combined with the new DynaBloc technology. Instatherm baths now available with newly engineered aluminum Dynablocs that fit into the bath body and hold popular size vials and tubes. Just use your existing 1,200 ml bath and block for precise heating or place the entire unit on any magnetic stirrer to combine stirring with Instatherm heat. Use existing equipment or buy a complete system Complete System (contains all items listed below) , Description Aluminum Block for 16mm Tubes Economy Temperature Controller, 120v with J Type Thermocouple Cimarec Magnetic Stirrer (7" x 7") " Aluminum Rod ,200 ml Instatherm bath, w/clip & cord Individual Instatherm Blocks* Individual blocks for use with Instatherm baths only. Block diameter (141mm) is for use in the , 1,200mL Instatherm bath. Description Block Height For 22, 2 Dr./8mL or 17 mm O.D. vials 30.8mm For 14, 4 Dr./16mL or 22mm O.D. vials 38.8mm For 24, 16mm O.D. tubes 50mm For 8, 40mL or 28mm O.D. vials 50mm Accessory T-Handle Extractor (fits all ACE blocks) *These blocks require NO base plate ACE carries a full line of stirrers. See our website for more details.

5 13634 Hotplate/Stirrers RT & RT Elite, Aluminum Top New, improved round-top magnetic stirrer/hotplates with sophisticated heating and stirring technology. Two-year warranty on hotplate/stirrers! Features HotTop warning indicator light RT Elite has RS232 inter face and LCD indicating speed Broad temperature ranges: ambient-350 C for both units, in 1 increments for the RT Elite, in 2 increments for the RT Speed range 50-1,200 RPM LCD temperature display Viscosity trend display 120V, 50/60 Hz Item RT Hotplate/Stirrer RT Elite Hotplate/Stirrer Stirrer/Hotplate New RCT Basic IKAMAG Improved version of the proven RCT model hotplate/ stirrer by IKA has a new integrated temperature control and many other enhancements. Features Exact temperature and speed setting via digital display even when switched off Hot Top indicator light Includes a PT1000 temperature sensor probe Digital error code display Safety set temperature limit displayed digitally Polished aluminum alloy top Includes clamp, rod, temperature sensor and cover Speed range 50-1,200 RPM Temperature range to 310 C 115V, 50/60 Hz ACE has several brands and styles of stirrer/hotplates available. See our website for more details.

6 Quick Selection Guide Vessels DynaBlocs Stir Bars mL mL mm diameter 3 Holes PTFE with Pivot Ring X-shaped PTFE 19mm mL mL mm diameter 3 Holes PTFE with Pivot Ring X-shaped PTFE 19mm mL mm diameter 4 Holes PTFE with Pivot Ring X-shaped PTFE 19mm mL mm diameter 5 Holes PTFE with Pivot Ring X-shaped PTFE 19mm mL mL mm I.D. x 27.6mm Hgt., 18 Holes mm mL mL mm I.D. x 50mm Hgt., 18 Holes mm mL Reaction Vial mm x 150mm tubes mm I.D. x 50mm Hgt., 18 Holes PTFE V Vane mm dram/ 16mL mm I.D. x 35.6mm Hgt., 28 Holes mm mL Reaction Vial mm x 75mm tube mm I.D. x 27.6mm Hgt., 54 Holes PTFE V Vane mm mm x 100mm tube mm x 125mm tube mm x 150mm tube mm I.D. x 50mm Hgt., 40 Holes mm

7 Quick Selection Guide Vessels DynaBlocs Stir Bars mL Reaction Vial mm I.D. x 35.6mm Hgt., 28 Holes PTFE V Vane Dr./8mL Dr./8mL mm I.D. x 27.6mm Hgt., 36 Holes mm Dr./4mL Dr./4mL mm I.D. x 27.6mm Hgt., 52 Holes mm Dr./2mL Dr./2mL mm I.D. x 27.6mm Hgt., 54 Holes PTFE Micro Bar Vessels Segmented (3 each) Blocks Stir Bars , , Dr./2mL Clear/s, 12x75mm tubes $ mm I.D. x 27.6mm Hgt., 12 Holes PTFE Micro Bar , Dr./4mL Clear/s 16mm I.D. x 27.6mm Hgt., 12 Holes , , Dr./8mL Clear/s, 16mm Tubes 17mm I.D. x 27.6mm Hgt., 8 Holes or , Dr./4mL Clear/s $ mm I.D. x 27.6mm Hgt., 12 Holes , , Dr./8mL Clear/s, 16mm Tubes 17 mm I.D. x 27.6mm Hgt., 8 Holes or Dr./16mL Clear/s 22 mm I.D. x 27.6mm Hgt., 4 Holes mL Round Bottom Flask $ mm well dia. x 50mm Hgt., 1 Hole or x100mm tubes 17mm I.D. x 50mm Hgt., 10 Holes , mL Clear/s 28 mm I.D. x 50mm Hgt., 4 Holes

8 ACE Instatherm Oil Bath Controller Kits For Glass Vessels Replaces open-coil immersion heaters banned by most safety departments. Lower Price! Bath Kit Complete Economy Consists of one bath plus one Economy Temperature Controller, one clip, and one Type J Thermocouple Temperature Sensor and cord , Bath Kit Complete With Removable Cord Consists of one each , and baths, three clips, three cords, plus one Temperature Controller with one Type J Thermocouple Temperature Sensor , Bath also available with permanent chord: , Complete Bath Kits for your convenience See our website or request our Instatherm brochure for more information. P.O. Box 688 Vineland, NJ Fax: TOLL-FREE: FAX: sales@aceglass.com Net Prices and specifications subject to change without notice.