450M 5G 300M 2.4G Dual Band WiFi Repeater VGA1000-G. Quick Setting Guide

Size: px

Start display at page:

Download "450M 5G 300M 2.4G Dual Band WiFi Repeater VGA1000-G. Quick Setting Guide"

Magnus Walton
5 years ago
Views:

1 450M 5G 300M 2.4G Dual Band WiFi Repeater VGA1000-G Quick Setting Guide 1

2 Declaration Copyright 2015 Shenzhen HouTian Network Communication Technology Co.,Ltd. All Rights Reserved,with retained ownership. Without Shenzhen HouTian Network Communication Technology Co., Ltd written authorization, any company or personal can t copy, writer or translation part or all contents. Can t do commodity distribution for any commercial or profitable purposes by any ways (electricity, mechanical, photoprint, record or other methods). VONETS is the registered trademark of Shenzhen HouTian Network Communication Technology Co., Ltd. The other all trademarks or registered trademarks mentioned in this documents are belong to the individual owners. The product specifications and information technology mentioned in this manual are just for reference, if any updates,without other notice. Except for special agreements, this manual is just for user guidance, any statements, information and so on in this manual can t constitute the warranty of any forms. 2

3 Product Introduction: 1) VGA1000-G is dual band WiFi Repeater, supports both 2.4G and 5G band. 2.4G frequency band is for normal power, no barrier transmission distance of 100 meters; 5G band is for high power, no barrier transmission distance of 1 kilometers. VGA1000-G is mainly used for long-distance transmission and wide range of wireless signal coverage. 2) VGA1000-G product structure, please see the following: Remark: When you want to restore the factory default setting, please press RESET button on the product for 5 seconds, after green light blink a few, it will reset automatically (it will take about 30 seconds). 3

Please set computer IP address to obtain an IP address automatically, please see the words in the red circle of the following picture: 4.

4 Chapter 1 Quick setting guide of bridge mode 1. Use 9V-15V power adapter to VGA1000-G power supply. 2. Open computer Wireless network connection, disable local area and other adapters. Remark: Users also can configure VGA1000-G by smart phone. 3. Please set computer IP address to obtain an IP address automatically, please see the words in the red circle of the following picture: 4. After computer or smart phone searched hotspot of VGA1000-G, then connect. User can choose 2.4G hotspot and 5G hotspot. Remark: SSID (hotspot name) of 2.4G is : VONETS_the last six characters of MAC_2.4G, password: ; SSID (hotspot name) of 5G is : VONETS_the last six characters of MAC_5G, password: ; 4

5. Open the IE browser, enter http://vonets.cfg virtual domain name setting(vdns) or http://192.168.254.254, then enter to webpage configuration webpage.

5 5. Open the IE browser, enter virtual domain name setting(vdns) or then enter to webpage configuration webpage. Remark: After VGA1000-G restore to factory, the default IP is Input user name and password. Remark: The default user name and password is admin. 7. Scan Hotspots After entering the IE browser, the WiFi hotspots window will appear, can search the WIFI hotspots signal that opened SSID broadcast around. If you need connect 2.4G hotspot, please choose 2.4G WiFi search ; if you need connect 5G hotspot, please choose 5G WiFi search, please see the following: Choose a correct WiFi signal, then click Next, the following interface will appear: 5

your device. Remark: After configured successfully, the hotspot name of 2.4G is source hotspot name_the last two characters of MAC address_2.

6 Input the correct password of the wifi hotspot, confirm it is correct one, then click Apply button. Click the submit button, the above tips will appear, configuration parameters were saved successfully, to ensure that the password is correct, please power-off restart your device. Remark: After configured successfully, the hotspot name of 2.4G is source hotspot name_the last two characters of MAC address_2.4g ; the hotspot name of 5G is source hotspots name_the last two characters of MAC address_5g. The WiFi password, encryption method and channel and some other parameters are the same as source hotspot, user can change SSID (hotspot name) and password in WiFi repeater option. 6

8 WiFi Repeater Remark: 1)VGA1000-G is not connected to any hot spot, hot spot connection status light (green light) quick blink; 2)VGA1000-G is connected to hot spot successfully, and WiFi hot spot

7 8 WiFi Repeater Remark: 1)VGA1000-G is not connected to any hot spot, hot spot connection status light (green light) quick blink; 2)VGA1000-G is connected to hot spot successfully, and WiFi hot spot signal is more than 50%, the status light(green light) quick blink; 3)VGA1000-G is connected to hot spot successfully, and WiFi hot spot signal is less than 50% but more than 10%, the status light (green light) intermittent quick blink; 4)VGA1000-G is connected to hot spot successfully, and the WiFi hot spot signal is less than 10%, the status light (green light) slow blink; 5)VGA1000-G is connected to hot spot failed, the status light (green light) will slow blink. Shenzhen Houtian Network Communication Technology Co.,Ltd 7

VONETS VAP11G M Mini WiFi Repeater. 300M Mini WiFi Repeater. High-power CPE VAP11G-500. Quick Setting Guide

VONETS VAP11G M Mini WiFi Repeater. 300M Mini WiFi Repeater. High-power CPE VAP11G-500. Quick Setting Guide , 300M Mini WiFi Repeater High-power CPE VAP11G-500 Quick Setting Guide 1 Declaration Copyright 2015 Shenzhen HouTian Network Communication Technology Co.,Ltd All rights reserved, with retained ownership